imgblur is intended to establish a ground truth for debugging mask blur issues. It performs a brute force (non-separable) Gaussian blur of the provided image.
The blur code itself is in sk_tools_utils so it can be more easily used programmatically in other places (e.g., blur unit tests).
Review URL: https://codereview.chromium.org/1384203002
Iterating through the 903K skps that represent the
imagable 1M top web pages triggers a number of
bugs, some of which are addressed here.
Some web pages trigger intersecting cubic
representations of arc with their conic
counterparts. This exposed a flaw in coincident
detection that caused an infinite loop. The loop
alternatively extended the coincident section and,
determining the that the bounds of the curve pairs
did not overlap, deleted the extension.
Track the number of times the coincident detection
is called, and if it exceeds an empirically found
limit, assume that the curves are coincident and
force it to be so.
The loop count limit can be determined by enabling
DEBUG_T_SECT_LOOP_COUNT and running all tests. The
largest count is reported on completion.
Another class of bugs was caused by concident
detection duplicating nearly identical points that
had been merged earlier. To track these bugs, the
'handle coincidence' code was duplicated as a
const debug variety that reported if one of a
dozen or so irregularities are present; then it is
easier to see when a block of code that fixes one
irregularity regresses another.
Creating the debug const code version exposed some
non-debug code that could be const, and some that
was experimental and could be removed. Set
DEBUG_COINCIDENCE to track coincidence health and
handling.
For running on Chrome, DEBUG_VERIFY checks the
result of pathops against the same operation
using SkRegion to verify that the results are
nearly the same.
When visualizing the pathops work using
tools/pathops_visualizer.htm, set
DEBUG_DUMP_ALIGNMENT to see the curves after
they've been aligned for coincidence.
Other bugs fixed include detecting when a
section of a pair of curves have devolved into
lines and are coincident.
TBR=reed@google.com
Review URL: https://codereview.chromium.org/1394503003
At draw time, this filter simply concatenates the given matrix to the
CTM, and recurses on its input. The matrix is thus applied to any
upstream filter parameters and crop rects.
BUG=skia:
Review URL: https://codereview.chromium.org/1392833005
Migrating the flag to embedder defines (Chromium already guarded).
Also augment gradient-focused GMs to generate both dithered/undithered
results.
BUG=skia:4436
R=reed@google.com,robertphillips@google.com
Review URL: https://codereview.chromium.org/1400813006
Note: this format does not yet pass validation tests.
Add skia_pdf_generate_pdfa GYP flag. Default to off for now.
PDF/A files are not reproducable, so they make correctness
testing harder.
Turn the Metadata struct into te SkPDFMetadata struct. This
splits out a lot of functionality around both kinds of metadata.
When PDF/A is used, add an ID entry to the trailer.
Add SkPDFObjNumMap::addObjectRecursively.
Test with
GYP_DEFINES=skia_pdf_generate_pdfa=1 bin/sync-and-gyp
ninja -C out/Release dm
out/Release/dm --config pdf --src skp gm -w /tmp/dm
With skia_pdf_generate_pdfa=0, all PDFs generated from GMs and
SKPs are identical. With skia_pdf_generate_pdfa=1, all PDFs
generated from GMs and SKPs render identically in Pdfium.
BUG=skia:3110
Review URL: https://codereview.chromium.org/1394263003
Reason for revert:
SkMD5 is not really part of the Skia library. This is breaking the roll by using it, since Chromium doesn't build it.
Original issue's description:
> SkPDF: Optionally output PDF/A-2b archive format.
>
> Note: this format does not yet pass validation tests.
>
> Add skia_pdf_generate_pdfa GYP flag. Default to off for now.
> PDF/A files are not reproducable, so they make correctness
> testing harder.
>
> Turn the Metadata struct into te SkPDFMetadata struct. This
> splits out a lot of functionality around both kinds of metadata.
>
> When PDF/A is used, add an ID entry to the trailer.
>
> Add SkPDFObjNumMap::addObjectRecursively.
>
> Test with
>
> GYP_DEFINES=skia_pdf_generate_pdfa=1 bin/sync-and-gyp
> ninja -C out/Release dm
> out/Release/dm --config pdf --src skp gm -w /tmp/dm
>
> With skia_pdf_generate_pdfa=0, all PDFs generated from GMs and
> SKPs are identical. With skia_pdf_generate_pdfa=1, all PDFs
> generated from GMs and SKPs render identically in Pdfium.
>
> BUG=skia:3110
>
> Committed: https://skia.googlesource.com/skia/+/939c0fe51f157104758bcb268643c8b6d317a530TBR=tomhudson@google.com,halcanary@google.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:3110
Review URL: https://codereview.chromium.org/1398193002
Note: this format does not yet pass validation tests.
Add skia_pdf_generate_pdfa GYP flag. Default to off for now.
PDF/A files are not reproducable, so they make correctness
testing harder.
Turn the Metadata struct into te SkPDFMetadata struct. This
splits out a lot of functionality around both kinds of metadata.
When PDF/A is used, add an ID entry to the trailer.
Add SkPDFObjNumMap::addObjectRecursively.
Test with
GYP_DEFINES=skia_pdf_generate_pdfa=1 bin/sync-and-gyp
ninja -C out/Release dm
out/Release/dm --config pdf --src skp gm -w /tmp/dm
With skia_pdf_generate_pdfa=0, all PDFs generated from GMs and
SKPs are identical. With skia_pdf_generate_pdfa=1, all PDFs
generated from GMs and SKPs render identically in Pdfium.
BUG=skia:3110
Review URL: https://codereview.chromium.org/1394263003
Rather than implementing some sort of "fill" in every
SkCodec subclass for incomplete images, let's make the
parent class handle this situation.
This includes an API change to SkCodec.h
SkCodec::getScanlines() now returns the number of lines it
read successfully, rather than an SkCodec::Result enum.
getScanlines() most often fails on an incomplete input, in
which case it is useful to know how many lines were
successfully decoded - this provides more information than
kIncomplete vs kSuccess. We do lose information when the
API is used improperly, as we are no longer able to return
kInvalidParameter or kScanlineNotStarted.
Known Issues:
Does not work for incomplete fFrameIsSubset gifs.
Does not work for incomplete icos.
BUG=skia:
Review URL: https://codereview.chromium.org/1332053002
Changes:
- Rebuild argc and argv so we can process command line arguments
- Remove unnecessary SimpleiOSApp files
- Add support for reading files from the app bundle
- Add gpu flag so we can start up directly into OpenGL
Review URL: https://codereview.chromium.org/1382943004
drawImage calls now properly embeds the original jpeg.
NOTE: drawBitmap*() calls no longer embed JPEG files when
possible (this is in advance of eliminating bitmaps backed
by encoded data). Chromium has already moved from
drawBitmap to drawImage.
Comparisons:
control:
total PDF drawImage/drawBitmap calls: 8010
total PDF jpeg images: 0
total PDF regular images: 3581
experiament:
total PDF drawImage/drawBitmap calls: 8014
total PDF jpeg images: 271
total PDF regular images: 3311
total PDF regular images: 3582 (271 + 3311)
When comparing rendered output there were perceptual
differences in the following four GMs: colorcube, emboss,
colormatrix, and tablecolorfilter. All of these differences
were improvements (that is, closer to the 8888 rendering)
due fixing a bug with colorfilters and forgetting to call
notifyPixelsChanged.
No SKPs had perceptual differences.
Total PDF size dropped from 133964 kB to 126276 kB, a 5.7%
improvement (mostly due to restoring use of JPG images in
SKPs).
BUG=skia:4370
Review URL: https://codereview.chromium.org/1372783003
Benefits:
- This mimics other decoding APIs (including the ones SkCodec relies
on, e.g. a png_struct, which can be used to decode an entire image or
one line at a time).
- It allows a client to ask us to do what we can do efficiently - i.e.
start from encoded data and either decode the whole thing or scanlines.
- It removes the duplicate methods which appeared in both SkCodec and
SkScanlineDecoder (some of which, e.g. in SkJpegScanlineDecoder, just
call fCodec->sameMethod()).
- It simplifies moving more checks into the base class (e.g. the
examples in skbug.com/4284).
BUG=skia:4175
BUG=skia:4284
=====================================================================
SkScanlineDecoder.h/.cpp:
Removed.
SkCodec.h/.cpp:
Add methods, enums, and variables which were previously in
SkScanlineDecoder.
Default fCurrScanline to -1, as a sentinel that start has not been
called.
General changes:
Convert SkScanlineDecoders to SkCodecs.
General changes in SkCodec subclasses:
Merge SkScanlineDecoder implementation into SkCodec. Most (all?) owned
an SkCodec, so they now call this-> instead of fCodec->.
SkBmpCodec.h/.cpp:
Replace the unused rowOrder method with an override for
onGetScanlineOrder.
Make getDstRow const, since it is called by onGetY, which is const.
SkCodec_libpng.h/.cpp:
Make SkPngCodec an abstract class, with two subclasses which handle
scanline decoding separately (they share code for decoding the entire
image). Reimplement onReallyHasAlpha so that it can return the most
recent result (e.g. after a scanline decode which only decoded part
of the image) or a better answer (e.g. if the whole image is known to
be opaque).
Compute fNumberPasses early, so we know which subclass to instantiate.
Make SkPngInterlaceScanlineDecoder use the base class' fCurrScanline
rather than a separate variable.
CodexTest.cpp:
Add tests for the state changes in SkCodec (need to call start before
decoding scanlines; calling getPixels means that start will need to
be called again before decoding more scanlines).
Add a test which decodes in stripes, currently only used for an
interlaced PNG.
TODO: Add tests for onReallyHasAlpha.
Review URL: https://codereview.chromium.org/1365313002
Reason for revert:
Need to somehow get access to encoders in chrome -- link error on the roll since SkImageEncoder is not built as part of chrome.
Original issue's description:
> change pixel-serializer to support reencoding existing data
>
> Trying to evolve this interface so it can
> - support rich set of backend-encoders (including ones like ETC1 that can cheaply convert to KXT
> - allow for encoding images as well as bitmaps (e.g. for picture serialization)
> - perhaps replace SkImageEncoder as an API (assuming we create a factory that returns a serializer given a format)
>
> BUG=skia:
>
> Committed: https://skia.googlesource.com/skia/+/13f48dc85aa68a60da66aaf39c93d527d11d1278TBR=scroggo@google.com,msarett@google.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:
Review URL: https://codereview.chromium.org/1371983003
Trying to evolve this interface so it can
- support rich set of backend-encoders (including ones like ETC1 that can cheaply convert to KXT
- allow for encoding images as well as bitmaps (e.g. for picture serialization)
- perhaps replace SkImageEncoder as an API (assuming we create a factory that returns a serializer given a format)
BUG=skia:
Review URL: https://codereview.chromium.org/1373683003
One side effect is that the SkShader's (or implicit shader's) fragment processor is responsible for the transition from an unpremul paint color to a premul color.
Review URL: https://codereview.chromium.org/1348583002
To avoid breaking existing SKPs, add a deserialization stub which
unflattens SkBitmapSource records to SkImageSources.
R=reed@google.com,mtklein@google.com,robertphillips@google.com
Review URL: https://codereview.chromium.org/1363913002
This implementation improves performance of SkMutex acquire / release pair from 42ns -> 13 ns.
SkSharedMutex and SkSpinlock have the same performance.
It also removes specialized windows and linux/mac code.
BUG=skia:
Review URL: https://codereview.chromium.org/1359733002
SkBitmapRegionDecoderInterface provides an interface
for multiple implementations of Android's
BitmapRegionDecoder.
We already have correctness tests in DM that will enable us
to compare the quality of our various BRD implementations.
We also need these performance tests to compare the speed
of our various implementations.
BUG=skia:4357
Review URL: https://codereview.chromium.org/1344993003
Reason for revert:
Failing ImageNewShaderTest on both Android (Tegra3 GPU) and iOS bots.
e.g.
/Users/chrome-bot/buildbot/skiabot-ipad4-000/build/slave/workdir/build/skia/tests/
ImageNewShaderTest.cpp:24 0 == memcmp(bm1.getPixels(), bm2.getPixels(), bm1.getSize())
ImageNewShaderTest.cpp:95 0xFFFF0000 == bmt.getColor(0, y)
ImageNewShaderTest.cpp:98 0xFFDEDEDE == bmt.getColor(x, y)
ImageNewShaderTest.cpp:98 0xFFDEDEDE == bmt.getColor(x, y)
ImageNewShaderTest.cpp:98 0xFFDEDEDE == bmt.getColor(x, y)
ImageNewShaderTest.cpp:98 0xFFDEDEDE == bmt.getColor(x, y)
ImageNewShaderTest.cpp:95 0xFFFF0000 == bmt.getColor(0, y)
...
Original issue's description:
> add ImageShader, sharing code with its Bitmap cousin
>
> This is done by having abstracted the BitmapShaderContext to take a BitmapProvider, instead of just a bitmap. This allows us to share all of that code between SkBitmap and SkImage, since both are valid providers.
>
> It also means that we can simplify SkImage_Base to not need a virtual for onNewShader, since ALL images can uniformly be turned into a shader now.
>
> BUG=skia:
>
> Committed: https://skia.googlesource.com/skia/+/0b93e3149d2cb30860c51f9f3204ae811d9a97caTBR=fmalita@chromium.org,bsalomon@google.com,robertphillips@google.com,reed@google.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:
Review URL: https://codereview.chromium.org/1355863002
This is done by having abstracted the BitmapShaderContext to take a BitmapProvider, instead of just a bitmap. This allows us to share all of that code between SkBitmap and SkImage, since both are valid providers.
It also means that we can simplify SkImage_Base to not need a virtual for onNewShader, since ALL images can uniformly be turned into a shader now.
BUG=skia:
Review URL: https://codereview.chromium.org/1342113002
