This keeps an alias so code keeps building.
Bug: skia:9792
Change-Id: If8575468d929d2ca28bc2f9e82de27291fb19aa1
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/264691
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Dump the program code, link it into a dynamic library,
then dlopen() / dlsym() it to get the entry point.
This makes profiling in Instruments work,
and probably also makes gdb work better.
This is quite slow so I've made it opt-in,
opting only nanobench in for now.
$ ninja -C out nanobench
$ instruments -t "Time Profiler" out/nanobench --config 8888 -m bitmap_RGBA_8888_A_scale_bilerp --skvm
~~> https://screenshot.googleplex.com/nw1L83qjqV6
~~> https://screenshot.googleplex.com/49HSo6Xpzcs
Change-Id: I9f91c675149178021a7a05030541a5965afbbcb5
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/264748
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Herb Derby <herb@google.com>
This might be easier than building with SK_USE_SKVM_BLITTER defined.
Change-Id: I72c1f361195bacf5a14e6633dd49e9a5ad721cff
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/264383
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
- allow clients to pass in raw-array at public level
- rewrite m44 concat to take raw-array for 2nd input
Extended canvas_matrix bench to also time 44 concats:
Before
207.51 canvas_matrix_4x4 8888
100.75 ? canvas_matrix_3x3 8888
100.79 canvas_matrix_2x3 8888
140.93 canvas_matrix_scale 8888
133.35 canvas_matrix_trans 8888
After
120.80 canvas_matrix_4x4 8888
...
bug: skia:9768
Change-Id: Iaa361b9897a183d930fd31aa67327caed25cd51d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/263209
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Mike Reed <reed@google.com>
This reverts commit dff4c1d5fd.
Reason for revert: Fix WIP
Original change's description:
> Revert "Avoid loop-dependent behavior in GrMemoryPoolBench"
>
> This reverts commit f811fc331a.
>
> Reason for revert: breaks on iOS
>
> Original change's description:
> > Avoid loop-dependent behavior in GrMemoryPoolBench
> >
> > This helps stability of benchmark across repeated runs, and across code
> > changes. Previously, a change to the tuned loop count could radically
> > change the allocation behavior within the loop's iteration and lead to
> > unfair comparisons.
> >
> > In addition, this separates the stack allocation pattern into N allocations
> > followed by N LIFO releases, and a push-pop alternating pattern of N
> > allocates and releases (so still LIFO, but reuses the memory at the start
> > of a block).
> >
> > In later CLs experimenting on the memory pool, I found that there were
> > surprising effects on performance linked to the specific interaction between
> > the allocation size, per-allocation metadata, and per-block metadata. To
> > help differentiate these coincidences, this adds two modes of allocation
> > where one should already be aligned.
> >
> > It also moves away from a global pool, so that it's possible to benchmark
> > on different block sizes and factor in the allocation/release cost of the
> > actual blocks (vs. the cursor management of a larger sized pool). As part
> > of this, the new/delete reference operator is added as an explicit benchmark.
> >
> > Change-Id: I12b8c11cb75db0df70460fe2e8cf6c029db7eb22
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/262936
> > Commit-Queue: Michael Ludwig <michaelludwig@google.com>
> > Reviewed-by: Brian Salomon <bsalomon@google.com>
>
> TBR=bsalomon@google.com,michaelludwig@google.com
>
> Change-Id: I16f2810699a378eb5a516ab9fb1834c10b65f01b
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/263029
> Reviewed-by: Michael Ludwig <michaelludwig@google.com>
> Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Change-Id: I51a9db111c26b49572c3fa0928e26ef6e5a7a74c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/263196
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Auto-Submit: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
The reason for the assert was breaking an assert, that if the CTM was scale/translate, that after
a preTranslate, it should still be that.
This is true... unless the new translate values are non-finite. In that case, we might turn a zero
into a NaN, (0 * non_finite --> nan), so we either have to require finite args (which we don't
at the moment) or we can't make this assert. This re-land removes that assert.
This reverts commit 268ed57d71.
Change-Id: I3c48a0aa17649351a246c1fbab5449f2d59aaf84
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/263023
Commit-Queue: Mike Reed <reed@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: Mike Reed <reed@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This reverts commit f811fc331a.
Reason for revert: breaks on iOS
Original change's description:
> Avoid loop-dependent behavior in GrMemoryPoolBench
>
> This helps stability of benchmark across repeated runs, and across code
> changes. Previously, a change to the tuned loop count could radically
> change the allocation behavior within the loop's iteration and lead to
> unfair comparisons.
>
> In addition, this separates the stack allocation pattern into N allocations
> followed by N LIFO releases, and a push-pop alternating pattern of N
> allocates and releases (so still LIFO, but reuses the memory at the start
> of a block).
>
> In later CLs experimenting on the memory pool, I found that there were
> surprising effects on performance linked to the specific interaction between
> the allocation size, per-allocation metadata, and per-block metadata. To
> help differentiate these coincidences, this adds two modes of allocation
> where one should already be aligned.
>
> It also moves away from a global pool, so that it's possible to benchmark
> on different block sizes and factor in the allocation/release cost of the
> actual blocks (vs. the cursor management of a larger sized pool). As part
> of this, the new/delete reference operator is added as an explicit benchmark.
>
> Change-Id: I12b8c11cb75db0df70460fe2e8cf6c029db7eb22
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/262936
> Commit-Queue: Michael Ludwig <michaelludwig@google.com>
> Reviewed-by: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com,michaelludwig@google.com
Change-Id: I16f2810699a378eb5a516ab9fb1834c10b65f01b
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/263029
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
This helps stability of benchmark across repeated runs, and across code
changes. Previously, a change to the tuned loop count could radically
change the allocation behavior within the loop's iteration and lead to
unfair comparisons.
In addition, this separates the stack allocation pattern into N allocations
followed by N LIFO releases, and a push-pop alternating pattern of N
allocates and releases (so still LIFO, but reuses the memory at the start
of a block).
In later CLs experimenting on the memory pool, I found that there were
surprising effects on performance linked to the specific interaction between
the allocation size, per-allocation metadata, and per-block metadata. To
help differentiate these coincidences, this adds two modes of allocation
where one should already be aligned.
It also moves away from a global pool, so that it's possible to benchmark
on different block sizes and factor in the allocation/release cost of the
actual blocks (vs. the cursor management of a larger sized pool). As part
of this, the new/delete reference operator is added as an explicit benchmark.
Change-Id: I12b8c11cb75db0df70460fe2e8cf6c029db7eb22
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/262936
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
This reverts commit 98bfcc7ff3.
Reason for revert: Flutter hitting assert:
../../third_party/skia/src/core/SkCanvas.cpp:1432: fatal error: "assert(fIsScaleTranslate == fMCRec->fMatrix.isScaleTranslate())"
Original change's description:
> Extend SkCanvas matrix stack to be 4x4, but with (basically) the same public API.
>
> Devices receive the 4x4, but by default they simply downsample it to SkMatrix.
>
> New SkM44 matrix for the impl. It differs from SkMatrix44 in a few ways
> - no tracking of "type"
> - faster for concat, as it does not use doubles for intermediates
> - much simpler API
>
> There are some low-bit differences in some gms, so adding a flag for clients to
> stage this change. (due to faster but lower-precision in SkM44::concat)
>
> Performance: running canvas_matrix bench
>
> 3x3 version:
>
> 167.93 canvas_matrix_3x3 8888
> 209.97 canvas_matrix_2x3 8888
> 174.87 canvas_matrix_scale 8888
> 135.30 canvas_matrix_trans 8888
>
> 4x4 version:
>
> 116.59 canvas_matrix_3x3 8888
> 105.40 canvas_matrix_2x3 8888
> 159.83 ? canvas_matrix_scale 8888
> 113.47 canvas_matrix_trans 8888
>
> Why faster?
> - not tracking matrix_type helps a lot it seems
> - faster full concat (no doubles)
>
> Before adding the specialized preConcats...
>
> 318.11 ? canvas_matrix_3x3 8888
> 339.38 canvas_matrix_2x3 8888
> 383.28 canvas_matrix_scale 8888
> 251.67 canvas_matrix_trans 8888
>
> Change-Id: I68eac942919fa5418081e789f31710a1e2a752da
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/262056
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Reviewed-by: Florin Malita <fmalita@chromium.org>
> Commit-Queue: Mike Reed <reed@google.com>
TBR=mtklein@google.com,bsalomon@google.com,herb@google.com,fmalita@chromium.org,fmalita@google.com,reed@google.com,michaelludwig@google.com
Change-Id: I28c3d69c19ba44ab65ca7c059221b64c7dffef22
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/263021
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This reverts commit 1c16b43033.
Reason for revert: Red on tree
Original change's description:
> Move makeDeferredRenderTargetContext calls to factory on RTC.
>
> Change-Id: Iaa8f5829d9f8650ff27a60f75fb2216f016ab85e
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/262058
> Commit-Queue: Greg Daniel <egdaniel@google.com>
> Reviewed-by: Brian Salomon <bsalomon@google.com>
TBR=egdaniel@google.com,bsalomon@google.com
Change-Id: I9e3c9d13c66b5437c87ad7136d283fa4ac81df1f
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/263019
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Devices receive the 4x4, but by default they simply downsample it to SkMatrix.
New SkM44 matrix for the impl. It differs from SkMatrix44 in a few ways
- no tracking of "type"
- faster for concat, as it does not use doubles for intermediates
- much simpler API
There are some low-bit differences in some gms, so adding a flag for clients to
stage this change. (due to faster but lower-precision in SkM44::concat)
Performance: running canvas_matrix bench
3x3 version:
167.93 canvas_matrix_3x3 8888
209.97 canvas_matrix_2x3 8888
174.87 canvas_matrix_scale 8888
135.30 canvas_matrix_trans 8888
4x4 version:
116.59 canvas_matrix_3x3 8888
105.40 canvas_matrix_2x3 8888
159.83 ? canvas_matrix_scale 8888
113.47 canvas_matrix_trans 8888
Why faster?
- not tracking matrix_type helps a lot it seems
- faster full concat (no doubles)
Before adding the specialized preConcats...
318.11 ? canvas_matrix_3x3 8888
339.38 canvas_matrix_2x3 8888
383.28 canvas_matrix_scale 8888
251.67 canvas_matrix_trans 8888
Change-Id: I68eac942919fa5418081e789f31710a1e2a752da
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/262056
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Mike Reed <reed@google.com>
Change-Id: I0b11d4210c6e663cfb4854fc33e1396fd79fe9a4
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/261780
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
The interpreter doesn't (yet) support all GPU intrinsics, so adjust the
code to avoid 'max' and 'saturate'.
The interpreter is more picky about uniform blocks being the correct
size, so don't pass the color matrix data to the "None" effect, which
has no uniforms.
Change-Id: I4609f913eaa762ca171b2875eb25d23141a0646c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/261931
Auto-Submit: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Updated internal usage of SkRuntimeColorFilterFactory to use this
instead. Once this lands, we can update SkiaRenderer in Chrome to
use it, and remove SkRuntimeColorFilterFactory.
This doesn't support a CPU callback function in the runtime color
filter - I don't think we're going to support that in the long term.
Change-Id: I714413bd590cf5cf4416ef62809a6e1d92211688
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/261681
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
- have to commit to a perspective stage (used to only use affine)
- coordinate between updater and shader/stages
Benches:
verts 608 --> 270
atlas 17.9 --> 5.6
Change-Id: I1d1ce9eb27b49d2ddcc610f6ea5c4720901b9e1b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/261136
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Most of these did nothing, and I'd like to remove the feature. Also, the
benchmark was using 'in uniform' which isn't supported (it asserts in
debug build).
Change-Id: I671ca69fdd50811a2090c7a03f5f23e6b38e6f96
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/260043
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Change-Id: I7c672ff6b8eb95ec8c1123a5bfdb202e1644f494
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/259281
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
Saves one heap allocation per DDL recorded.
Change-Id: I9393aedc3b48031cd2ea5f0160b107915077099a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/259419
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
This is a first step towards pulling the creation of the GrProgramInfos explicitly into the Ops' onExecute methods. We need this behavior so programInfo creation can be moved forward to onPrePrepare.
For now, pipeline creation is a static member on GrSimpleMeshDrawOpHelper so GrPipeline creation can be bottle-neckedOps for Ops that don't use the helper. In some future world CreatePipeline could become non-static to reduce some of the duplicate code.
Bug: skia:9455
Change-Id: I2d35dd223db824e84616f5df0f1dca34c1b6e412
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/258003
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Drop unnecessary () in `const char* (*fText)`. Sure, whatever.
Then a couple tweaks where we use strncpy():
In one case in SkICC.cpp, GCC warns us we're passing sizeof(dst) as
the copy count, which can be error prone because you may miss a
terminating nul. I believe the existing strncpy() behavior is what
we want here, so I've stifled this and left a note. We don't really
want a terminating nul... we want a zero fill of the remaining dst.
On the other side of that if-statment in that same function, GCC
warns that we've passed exactly sizeof(src) as the copy count when
writing the calculated description prefix, which again might be
buggy due to a missed terminating nul. Seemed like memcpy() was the
way to go here for that prefix. Ultimately we check to make sure we
wrote every single destination byte.
Over in SkPDFMetadata.cpp, strncpy() is concerned once again that
we're copying strlen(src) and thus omitting the terminating nul. As
usual we don't want that terminating nul, so switch to memcpy() to
make that explicit.
I'm starting to think strncpy() is too helpful to reason about sanely.
Change-Id: I1bcd5f4e406ca388c1c236c5f3ee531bf1737705
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/257408
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
When iterating over the coord transforms or texture samplers of a
FP also have access to the owning FP.
Pass a coord transform range to GPs rather than a pointer to an
iterator.
Change-Id: If7c829a67dce6600d7f49e12d6f49f685dcace3a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/256216
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
This reverts commit 3e7af41224.
Change-Id: Id4f66b3956f4bdbe690db20fc478b7365ee89717
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/256676
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Auto-Submit: Mike Reed <reed@google.com>
This reverts commit 1792b19485.
Reason for revert: need to update legacy_convexity, still used by google3
Original change's description:
> Revert "Revert "Use flat version of path-direction enum""
>
> This reverts commit 0dacc6b7d3.
>
> Change-Id: Ie103e9f36b07e4ee256a3688a4decf3a6dd74314
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/255832
> Auto-Submit: Mike Reed <reed@google.com>
> Reviewed-by: Mike Reed <reed@google.com>
> Commit-Queue: Mike Reed <reed@google.com>
TBR=reed@google.com
Change-Id: I0ecea0eb8a237298c6b908cc4bfd1cacdfc5b900
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/255976
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
This reverts commit 0dacc6b7d3.
Change-Id: Ie103e9f36b07e4ee256a3688a4decf3a6dd74314
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/255832
Auto-Submit: Mike Reed <reed@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
This reverts commit e0fbe94351.
Reason for revert: need to add guard flag to flutter
Original change's description:
> Use flat version of path-direction enum
>
> Bug: skia:9663
> Change-Id: I00077d9f2b14b3e983e6a46ef6f560cabdb1678d
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/242557
> Commit-Queue: Mike Reed <reed@google.com>
> Reviewed-by: Florin Malita <fmalita@chromium.org>
TBR=fmalita@chromium.org,reed@google.com
Change-Id: If47173d9b203b2d3a175af290a15d986accb4703
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:9663
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/255831
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
This CL is 100% plumbing. We ultimately want all GrPrimitiveProcessor-derived objects to not be refCounted. This will make several helper objects POD and, by putting them into an arena, will make managing their lifetime easier (e.g., for DDL prePreparing).
Note: the CCPR GrGeometryProcessor-derived classes only ever appear on the stack so aren't forced into arenas.
Bug: skia:9455
Change-Id: Ib9be503d2fbf8c2578642df93fc301156629829d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/255304
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Handy if you want to flush, or otherwise understand the underlying buffer(s).
Change-Id: I3d6610695c8603232192b26c687c6c74512165dd
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/254803
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
More cleaning to do if we like this idea...
Change-Id: I608143db085911565dd5f5426f7ee6436ec58cdf
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/254680
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
This further consolidates the information required to compute the program key (esp. for Vulkan). This CL mainly comprises the plumbing portion - a follow up CL will actually use it.
Bug: skia:9455
Change-Id: Iaac716c289916981a1757a333bfa57b3051fd35b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/252161
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Propagating usage of these helpers will, hopefully, improve code reuse and centralize future changes.
This is pulled out of https://skia-review.googlesource.com/c/skia/+/252161/ (Add GrPrimitiveType to GrProgramInfo)
Bug: skia:9455
Change-Id: I9b46e42db8561d98fb724a41a1f7a3bec4bf97b0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/252484
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This reverts commit e63595dd85.
Reason for revert: Breaking the Perf tests:
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Command exited with code 139
#######################################
symbolized stacktrace follows
#######################################
build/nanobench BulkRectBench<1000, (RectangleLayout)1, (ImageMode)2, (DrawMode)2>::onPerCanvasPreDraw(SkCanvas*) at skia/bench/BulkRectBench.cpp:218
build/nanobench main at skia/bench/nanobench.cpp:1277
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf1)[0x7f1213dad2e1]
build/nanobench _start at ??:?
Original change's description:
> Add variety of bulk API benchmarks
>
> Covers drawing 1000 anti-aliased rectangles, either sharing 1 image, using
> a unique image, or as a solid color. Tests using the bulk APIs and regular
> one-at-a-time drawing.
>
> Change-Id: Icdf5a1f6df229aed785212d0941b89c11aa785c0
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/251003
> Commit-Queue: Michael Ludwig <michaelludwig@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
TBR=robertphillips@google.com,egdaniel@chromium.org,michaelludwig@google.com
Change-Id: I3b26d5a04c472993585242a108c2764ea2b96940
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/251213
Reviewed-by: Joe Gregorio <jcgregorio@google.com>
Commit-Queue: Joe Gregorio <jcgregorio@google.com>
Covers drawing 1000 anti-aliased rectangles, either sharing 1 image, using
a unique image, or as a solid color. Tests using the bulk APIs and regular
one-at-a-time drawing.
Change-Id: Icdf5a1f6df229aed785212d0941b89c11aa785c0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/251003
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Use `extra_cflags=["-DSK_CAPTURE_DRAW_TEXT_BLOB"]` to enable.
Change-Id: I1d6db478ee91696cdce090647b889c17a83a2718
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/250259
Commit-Queue: Hal Canary <halcanary@google.com>
Reviewed-by: Herb Derby <herb@google.com>
There is a bug on Pixel and Pixel2 devices where the program
eventually terminates with a non-zero exit code. Closing the
outResultsFile between JSON flushes seems to fix it (for whatever
reason).
Bug: b/143074513
Change-Id: I935e982e88758fda19292129c8031f8501cca615
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/249821
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
This is a reland of 6fc04f88a8
Original change's description:
> Reland "SkSurface asynchronous read APIs allow client to extend pixel lifetime"
>
> This is a reland of ce240cc6fd
>
> Original change's description:
> > SkSurface asynchronous read APIs allow client to extend pixel lifetime
> >
> > Previously the pixel data passed to the client was only valid during
> > the client's callback. This meant if the client wanted to defer
> > processing of the data a copy was necessary.
> >
> > Now we pass an object to the callback and the pixel lifetime is tied
> > to the lifetime of that object.
> >
> > The object may be holding a GPU transfer buffer mapped. We don't assume
> > that the object will be released on the direct GrContext thread. So
> > when the object is destroyed it posts a message to a new type,
> > GrClientMappedBufferManager, hanging off the direct context. The direct
> > context will periodically check for messages and unmap and then unref
> > buffers so that they can be reused. Currently this is done in
> > GrContext::performDeferredCleanup() and GrDrawingManager::flush().
> >
> > The old API is kept around for backwards compatibility but it is
> > reimplemented as a bridge on top of the new mechanism.
> >
> > Also a utility function to SkImageInfo is added to directly make a new
> > info with a specified dimensions rather than passing the width and
> > height separately to makeWH().
> >
> > Bug: chromium:973403
> > Bug: skia:8962
> >
> > Change-Id: Id5cf04235376170142a48e90d3ecd13fd021a2a6
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245457
> > Reviewed-by: Brian Osman <brianosman@google.com>
> > Commit-Queue: Brian Salomon <bsalomon@google.com>
>
> Bug: chromium:973403, skia:8962
> Change-Id: I5cecd36276c8b6dc942cf549c7095db2df88530c
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245678
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
Bug: chromium:973403, skia:8962
Change-Id: Ie584c1c3ef8021c976f71b708e53871c693cc450
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/246057
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit 6fc04f88a8.
Reason for revert: Chrome roll failure suspect because of:
* https://chromium-review.googlesource.com/c/chromium/src/+/1837131 (22 commits)
* https://chromium-review.googlesource.com/c/chromium/src/+/1837214 (24 commits)
Original change's description:
> Reland "SkSurface asynchronous read APIs allow client to extend pixel lifetime"
>
> This is a reland of ce240cc6fd
>
> Original change's description:
> > SkSurface asynchronous read APIs allow client to extend pixel lifetime
> >
> > Previously the pixel data passed to the client was only valid during
> > the client's callback. This meant if the client wanted to defer
> > processing of the data a copy was necessary.
> >
> > Now we pass an object to the callback and the pixel lifetime is tied
> > to the lifetime of that object.
> >
> > The object may be holding a GPU transfer buffer mapped. We don't assume
> > that the object will be released on the direct GrContext thread. So
> > when the object is destroyed it posts a message to a new type,
> > GrClientMappedBufferManager, hanging off the direct context. The direct
> > context will periodically check for messages and unmap and then unref
> > buffers so that they can be reused. Currently this is done in
> > GrContext::performDeferredCleanup() and GrDrawingManager::flush().
> >
> > The old API is kept around for backwards compatibility but it is
> > reimplemented as a bridge on top of the new mechanism.
> >
> > Also a utility function to SkImageInfo is added to directly make a new
> > info with a specified dimensions rather than passing the width and
> > height separately to makeWH().
> >
> > Bug: chromium:973403
> > Bug: skia:8962
> >
> > Change-Id: Id5cf04235376170142a48e90d3ecd13fd021a2a6
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245457
> > Reviewed-by: Brian Osman <brianosman@google.com>
> > Commit-Queue: Brian Salomon <bsalomon@google.com>
>
> Bug: chromium:973403, skia:8962
> Change-Id: I5cecd36276c8b6dc942cf549c7095db2df88530c
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245678
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com,brianosman@google.com
Change-Id: I9e01d1b82fb399b94292441d91da51176bb161d9
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:973403, skia:8962
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245956
Reviewed-by: Ravi Mistry <rmistry@google.com>
Commit-Queue: Ravi Mistry <rmistry@google.com>
This is a reland of ce240cc6fd
Original change's description:
> SkSurface asynchronous read APIs allow client to extend pixel lifetime
>
> Previously the pixel data passed to the client was only valid during
> the client's callback. This meant if the client wanted to defer
> processing of the data a copy was necessary.
>
> Now we pass an object to the callback and the pixel lifetime is tied
> to the lifetime of that object.
>
> The object may be holding a GPU transfer buffer mapped. We don't assume
> that the object will be released on the direct GrContext thread. So
> when the object is destroyed it posts a message to a new type,
> GrClientMappedBufferManager, hanging off the direct context. The direct
> context will periodically check for messages and unmap and then unref
> buffers so that they can be reused. Currently this is done in
> GrContext::performDeferredCleanup() and GrDrawingManager::flush().
>
> The old API is kept around for backwards compatibility but it is
> reimplemented as a bridge on top of the new mechanism.
>
> Also a utility function to SkImageInfo is added to directly make a new
> info with a specified dimensions rather than passing the width and
> height separately to makeWH().
>
> Bug: chromium:973403
> Bug: skia:8962
>
> Change-Id: Id5cf04235376170142a48e90d3ecd13fd021a2a6
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245457
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
Bug: chromium:973403, skia:8962
Change-Id: I5cecd36276c8b6dc942cf549c7095db2df88530c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245678
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
