- most of the small diffs are because I moved GrWangsFormula.h out
of the tessellate/ directory and into the geometry/ directory since
it's more general than HW tessellation.
The previous implementation was based on the heuristic that the distance
from the true curve to the line segment would be divided by 4 every time
the curve was recursively subdivided. This was a reasonable
approximation if the curve had balanced curvature on both sides of the
split. However, in the case of the new GM's curve, the left half was
already very linear and the right half had much higher curves.
This lead to the approximation reporting fewer points than required.
Theoretically, those few points that weren't utilized by the left half
of the curve could have been made available to the right half, but the
implementation of that would be tricky.
Instead, it now uses Wang's formula to compute the number of points.
Since recursive subdivision leads to linearly spaced samples assuming it
can't stop early, this point count represents a valid upper bound on
what's needed. It also then ensures both left and right halves of a
curve have the point counts they might need w/o updating the
generation implementations. However, since the recursive point
generation exits once each section has reached the error tolerance, in
scenarios where the prior approximation was reasonable, we'll end up
using fewer points than reported by Wang's. Hopefully that means there
is negligible performance regression since we won't be increasing
vertex counts by that much (except where needed for correctness).
Bug: skia:11886
Change-Id: Iba39dbe4de82011775524583efd461b10c9259fe
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/405197
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Change-Id: I674f038600afd6d49316c1ece515941ee5579068
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/406939
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
* Make sure to actually use hardware tessellation on the *_tess_segs_5
gms. These had started using the fixed count tessellator.
* Add a trickycubicstrokes version with round caps to test upcoming
coverage AA modes.
* Make the colors more appealing since I spend all day looking at
these gms.
Bug: skia:10419
Change-Id: Ie7ab4e936ffa3ccffe4999e51fac4c3d4ab97f06
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/406976
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
This effectively reverts a80ce1a36d,
and goes back to using SkMakeSpan (which works in C++14).
Change-Id: Iaa63c86b5acaadbdd60588b0a5c703820e810770
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/406938
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This makes them easier to integrate with other shader code than having
them in GrGeometryProcessor.
Bug: skia:11396
Change-Id: I572348b8484ae46e00ac15832cd818390d536441
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/406437
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
This is a reland of adadb95a9f
... adds a temporary workaround for some Android framework code.
Original change's description:
> Better first-class shader & color filter support in runtime effects
>
> This does a few things, because they're all intertwined:
>
> 1) SkRuntimeEffect's API now includes details about children (which Skia
> stage was declared, not just the name). The factories verify that the
> declared types in the SkSL match up with the C++ types being passed.
> Today, we still only support adding children of the same type, so the
> checks are simple. Once we allow mixing types, we'll be testing the
> declared type against the actual C++ type supplied for each slot.
> 2) Adds sample variants that supply the input color to the child. This
> is now the only way to invoke a colorFilter child. Internally, we
> support passing a color when invoking a child shader, but I'm not
> exposing that. It's not clearly part of the semantics of the Skia
> pipeline, and is almost never useful. It also exposes users to
> several inconsistencies (skbug.com/11942).
> 3) Because of #2, it's possible that we can't compute a reusable program
> to filter individual colors. In that case, we don't set the constant
> output for constant input optimization, and filterColor4f falls back
> to the slower base-class implementation.
>
> Bug: skia:11813 skia:11942
> Change-Id: I06c41e1b35056e486f3163a72acf6b9535d7fed4
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/401917
> Commit-Queue: Brian Osman <brianosman@google.com>
> Reviewed-by: Mike Klein <mtklein@google.com>
Bug: skia:11813 skia:11942
Change-Id: I2c31b147ed86fa8c4dddefb7066bc1d07fe0d285
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/404637
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This reverts commit adadb95a9f.
Reason for revert: breaking android
Original change's description:
> Better first-class shader & color filter support in runtime effects
>
> This does a few things, because they're all intertwined:
>
> 1) SkRuntimeEffect's API now includes details about children (which Skia
> stage was declared, not just the name). The factories verify that the
> declared types in the SkSL match up with the C++ types being passed.
> Today, we still only support adding children of the same type, so the
> checks are simple. Once we allow mixing types, we'll be testing the
> declared type against the actual C++ type supplied for each slot.
> 2) Adds sample variants that supply the input color to the child. This
> is now the only way to invoke a colorFilter child. Internally, we
> support passing a color when invoking a child shader, but I'm not
> exposing that. It's not clearly part of the semantics of the Skia
> pipeline, and is almost never useful. It also exposes users to
> several inconsistencies (skbug.com/11942).
> 3) Because of #2, it's possible that we can't compute a reusable program
> to filter individual colors. In that case, we don't set the constant
> output for constant input optimization, and filterColor4f falls back
> to the slower base-class implementation.
>
> Bug: skia:11813 skia:11942
> Change-Id: I06c41e1b35056e486f3163a72acf6b9535d7fed4
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/401917
> Commit-Queue: Brian Osman <brianosman@google.com>
> Reviewed-by: Mike Klein <mtklein@google.com>
TBR=mtklein@google.com,bsalomon@google.com,brianosman@google.com
Change-Id: I94ba57e73305b2302f86fd0c1d76f667d4e45b92
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:11813 skia:11942
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/404117
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
This does a few things, because they're all intertwined:
1) SkRuntimeEffect's API now includes details about children (which Skia
stage was declared, not just the name). The factories verify that the
declared types in the SkSL match up with the C++ types being passed.
Today, we still only support adding children of the same type, so the
checks are simple. Once we allow mixing types, we'll be testing the
declared type against the actual C++ type supplied for each slot.
2) Adds sample variants that supply the input color to the child. This
is now the only way to invoke a colorFilter child. Internally, we
support passing a color when invoking a child shader, but I'm not
exposing that. It's not clearly part of the semantics of the Skia
pipeline, and is almost never useful. It also exposes users to
several inconsistencies (skbug.com/11942).
3) Because of #2, it's possible that we can't compute a reusable program
to filter individual colors. In that case, we don't set the constant
output for constant input optimization, and filterColor4f falls back
to the slower base-class implementation.
Bug: skia:11813 skia:11942
Change-Id: I06c41e1b35056e486f3163a72acf6b9535d7fed4
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/401917
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
This adds an explicit DeclareGlobal call, which must now be called for
variables that were previously implicitly global.
Change-Id: Iaf838880d1033ee52aac9246e31e3bda9a3b36f0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/402399
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
Simplifies SampleUsage quite a bit (no need to track multiple kinds of
sampling, variable matrices don't exist any more, etc...).
Change-Id: I58b8de7218d00c4d882d2650672e5fe01892a062
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/402177
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Replace with two methods in SkGr.h that make cached/uncached texture
proxies from SkBitmap. Move code that makes a GrFP from the proxy
to SkImage_Raster::asFragmentProcessor.
Bug: skia:11877
Change-Id: I51a0ae687561be9b0e44b98ee50f171e42476d94
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/401920
Reviewed-by: Robert Phillips <robertphillips@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
For GPU:
Handling a blob that moved around in perspective reused cached
information incorrectly. Always recalculate the sub run
information when drawing perspective.
For Bitmap:
Make color emoji draw correctly.
Testing:
Add a GM that draws a single text blob in multiple different
perspective orientations.
Bug: skia:10473
Bug: skia:8914
Change-Id: I945e3326804ec47bf8cbca0e3cf4a17afc9ba5f0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/400598
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Bug: skia:11869
Change-Id: Ia6693cd765b5bd2acda147798b79a05ec31bbce5
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/401436
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
In the new GM, the left and right portions of the path have a shared
vertex. The two edges leaving that vertex vertically towards the bottom
of the image are nearly parallel but the right edge has a steeper slope.
This leads to two sources of self intersections. The outset vertices
for the left and right sides intersect, which converts some of those
edges into "connecting" edges and removes others (preventing double
hitting of pixels). However, these outset but now "connecting" edges
from the right side also overlap with the inset vertices of the left
shape, requiring additional vertex splitting and connecting edge
creation.
The old alpha logic when one of the intersecting edges was a connecting
edge was to use its interpolated alpha value. In this case, since the
connecting edge originated from two outset vertices, its end point
alphas were 0 and the split alpha became 0, even though the other
intersecting edge was an interior edge.
This CL flips the logic around and ensures that any split vertex that
is on the interior edges remains fully opaque, any vertex that is
fully on the exterior remains fully transparent, and anything else
uses the max of the interpolated alphas (equivalent to the old
logic when one edge was connecting and one was exterior, but is more
accurate if somehow we get two connecting edges intersecting).
Bug: skia:11859
Change-Id: I85d2d54a8833e3c9da2fdd1a4f3a0513119730b9
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/400596
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Bug: skia:11813
Change-Id: I9748a2806fe4636111fbb5740a3ebdb0814cfc35
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/401018
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Mixed samples is no longer relevant for Ganesh. DMSAA and the new
Ganesh architecture both rely on full MSAA, and any platform where
mixed samples is supported will ultimately not use the old
architecture.
Change-Id: I5acc745010e090ef26310d92ec6240be2cd494cf
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/399837
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Add a drawGlyphs to SkCanvas that takes SkRSXform instead of
positions. Update buffer sizing calculations to take
SkRSXform buffers into account.
Change-Id: I14529088199dcd0b1ae78b4605e1ba77fec2000e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/399096
Reviewed-by: Ben Wagner <bungeman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Herb Derby <herb@google.com>
The old factory is deprecated. The new ones do stricter checking on the
signature of main and calls to sample, and include checks at effect
creation-time that the SkSL is valid for the requested stage.
Bug: skia:11813
Change-Id: Ibd15a6f90e74bdc9c2352d3dc61b6682f626f413
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/397477
Reviewed-by: Florin Malita <fmalita@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Also take SkImageInfo in SkImage_GpuBase.
Change-Id: Ie6d71a9a4a3740b9acc0faae72df2796e9a0e567
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/398230
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This ensures we don't lose the original SkSurfaceProps when creating
image filters, etc.
Bug: skia:11396
Change-Id: I6b412361c1005138278a1396faa7f7e069ec7eb2
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/397291
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
This was an experimental feature. It worked (but only the GPU backend).
It was never adopted or used by anyone, to my knowledge. It's a large
amount of code, and a strange corner of SkSL for users to stumble into.
Bug: skia:10680
Change-Id: I0dda0364bce7dbffa58c32de4c7801ec2a6bc42e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/398222
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
As explained, this is *very* conservative. It only works when the child
is sampled from within main, and using a direct reference to the coords
parameter. If that parameter is ever modified (even after being used),
the optimization doesn't happen. For most cases, this is fine.
Bug: skia:11869
Change-Id: Ia06181730a6d07e2a4fe2de4cc8e8c3402f0dc52
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/397320
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
These are rounded rectangles whose corners are superellipses instead
of ovals. This builds on a lot of work done by zakcohen@google.com to
define a consistent, visually appealing shape that can be used
reliably in the Android UI.
Change-Id: I97fde7be870152c9ee776fde53118019d0caa251
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/397416
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
More details are in the bug, but the specific test case gets an
overlap region in the AA outset geometry for the left and right shapes.
Additionally, the mitered outset for the left shape is collinear with
the bottom of the right shape, so the winding of exterior edge of
the overlap region is updated to +2.
When determining the polygons to fill, this +2 on the outer edges
violates the winding rules that normally ensure the interior polygons
(that use +/-2 instead of +/-1) are always filled.
It appears a similar bug fix was added here:
https://skia-review.googlesource.com/c/skia/+/141952/
but then didn't survive a heavy refactor later:
https://skia-review.googlesource.com/c/skia/+/215094
To the best of my knowledge, this is achieving the same result as the
original fix but is updated to preserve winding scale for interior
polygons with overlap regions (the code checks for these, but they
seem pretty rare to me).
Bug: 1197461
Change-Id: I0d32820af8cfec92c46114aeaa58b6e340abdfca
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/397140
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Modifies helpers on GrGLSLGeometryProcessor that insert, set, and make
keys for view/local matrix uniforms to not omit the uniform when
the matrix is identity or use a float4 when it is scale/trans. Always
uses a 3x3.
Bug: skia:11844
Change-Id: I0f25b60b46b8932d7e2cac4a50159d22b9cd84d2
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/395656
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Change-Id: Ie36ea4d5186f6cca341efc6300b813ec8255bdbb
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/388457
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
For now, just bolt this onto the existing runtime effects. The next step
is to add dedicated modes to the compiler for shader vs. color filter.
Once we get there, we will be much more strict about main signature in
each mode (and start adding other per-mode error checking).
Bug: skia:11813
Change-Id: I27e27600209e9844ae107364baea2fb949b47c3f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/395838
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
We are up to having seven distinct types of codegen, and will soon have
an 8th (DSL C++).
Change-Id: I6758328390c234ba1d5c30c118199dbc820af52a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/395817
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
No functionality changes, just making the naming consistent with our
other enums.
Change-Id: Ic9bc4a89f8373e4dc1060067a41468fb626e5fa1
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/394160
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
This reverts commit 92b35673c5.
Reason for revert: breaking the android roll (see ag/14076257)
Original change's description:
> Lift atlas clip FP creation out of GrClip::apply
>
> Atlas clips always had a potential point of failure: If the SDC's
> opsTask ever got closed between GrClip::apply and
> GrOpsTask::addDrawOp, their mask would have gotten sent to the wrong
> opsTask. It didn't _look_ like this could happen with the current
> code, but it could have also been inadvertently changed quite easily.
>
> This CL adds a "pathsForClipAtlas" array for GrClip::apply to fill out
> instead of creating FPs. The SDC then generates the actual clip atlas
> FPs once it knows exactly which opsTask they will belong in.
>
> Bug: chromium:928984
> Change-Id: I507ab13b2b5e8c3c3c1916d97611297dbbd8a522
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/389926
> Commit-Queue: Chris Dalton <csmartdalton@google.com>
> Reviewed-by: Michael Ludwig <michaelludwig@google.com>
TBR=robertphillips@google.com,csmartdalton@google.com,michaelludwig@google.com,adlai@google.com
Change-Id: I9597d822a9f31b7070aee691ddf3a52f4f424a24
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:928984
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/392339
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Commit-Queue: Derek Sollenberger <djsollen@google.com>
Atlas clips always had a potential point of failure: If the SDC's
opsTask ever got closed between GrClip::apply and
GrOpsTask::addDrawOp, their mask would have gotten sent to the wrong
opsTask. It didn't _look_ like this could happen with the current
code, but it could have also been inadvertently changed quite easily.
This CL adds a "pathsForClipAtlas" array for GrClip::apply to fill out
instead of creating FPs. The SDC then generates the actual clip atlas
FPs once it knows exactly which opsTask they will belong in.
Bug: chromium:928984
Change-Id: I507ab13b2b5e8c3c3c1916d97611297dbbd8a522
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/389926
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Change-Id: I37202f26bd1d990f80528f490ccd7e99cbc2139f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/392056
Commit-Queue: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: Brian Osman <brianosman@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
Bug: skia:11803
Change-Id: I925f14be282b96355721986de6049090b35adf3d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/391856
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
The `compositor_quads_xxxxxx` slides were attempting to create their
renderers at program startup time. These are now created in
onOnceBeforeDraw instead.
Change-Id: I5dd5844447bf87348cb88ee97aa4e03593eb07fe
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/389616
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Found during implementation of COLRv1 fuzzer for FreeType that translate
operation was still missing.
Added a test glyph containing two squares filled with a radial gradient
shifted by dx 128, dy -128 and dx -308, dy 307
combined using a PaintComposite.
Bug: skia:11790
Change-Id: I4cbfe34a111a450777dc2f8fa9d32a405f808a89
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/389116
Commit-Queue: Ben Wagner <bungeman@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
Sk3Perspective -> SkM44::Perspective
Sk3LookAt -> SkM44::LookAt
Also adds some SK_API tags to the SkV[2,3,4] structs. Also fixes
linkage issues around Sk3Perspective/LookAt by moving them into the
exported SkM44 (if we don't like them as SkM44 factories, will just need
to add SK_API tags to old Sk3Perspective/Lookat directly).
Change-Id: I3f125211b76899f216e63cc8d587776004516e36
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/388476
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Bug: skia:11760, skia:11787
Change-Id: Idfedb90576e0484bf32a9002081c0fcb888141eb
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/388216
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Only the largest sigma (320) would hit the downscale limit with the
old sigmas and image sizes. However, that sigma was far too large
to produce reference values in a reasonable amount of time.
Reduce the image sizes so that the downscale limit can be hit with a
smaller sigma.
Bug: skia:11735
Change-Id: Ia7f4385c6114f7071a14336ca39f81cf9ac68861
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/386058
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
into a new GrGLSLGeometryProcessor. Since NVPR is no more this
distinction (between GLSL- Primitive and Geometry -Processor)
probably isn't needed/useful.
Bug: skia:11760
Change-Id: I75621725bd2b0ef3dbac2ea6449bd571551babab
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/388036
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
With the removal of NVPR we no longer need this distinction.
Bug: skia:11760
Change-Id: I225a4feb764395fb72aca3ffc8b6d05396bf0b1e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/386890
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Change-Id: I6bf9cad2dd7095afbc153e90510dd0f7c398797d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/382936
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
GM initially does not draw correctly because of large sigma drop outs.
Make SkGpuBlurUtils::GaussianBlur use the correct translation when both
sigmas are (effectively) 0.
Bug: skia:11735
Change-Id: I674c63cc57b56995a7ade4c098bb997bd5baee8a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/383703
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
All that's left is a clip atlas renderer.
Bug: chromium:1158093
Change-Id: I8b509904a752a202ff1321e5302c41a3f57a5edb
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/383741
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
It is undefined for the inner rrect to not be contained in the inner.
Change-Id: I632060771fb7918050e1836d17b4702ea765a08f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/384116
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
This needed to be updated to match changes in
http://review.skia.org/382476. It is not tested on any of the normal
CQ trybots.
Change-Id: I3c0843d8e77958192c0db9ad8f6b797aec887fe4
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/382757
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
SkRRectPriv::IsSimpleCircular does a tolerance-based check for the
rrect radii but not for determining if the rrect is simple. This adds
IsNearlySimpleCircular as a looser check, since we don't care in this
case that the rrect is perfectly simple.
Bug: skia:11717
Change-Id: Ibbd53ff8c120287339fa29f87f064e6fb633ee7c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/382703
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
For things like path rendering we can (and should) do better than an
atlas. But for use cases like "many small paths clipped by many small
paths," an atlas is probably still the best solution we have.
Change-Id: Iff5d250d0d6ccba9235f3fe652891554e3fdfc24
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/380856
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
This is useful because it allows the variables to be declared as `const`
when they are trivial values like `half4(1)`. This enables the constant
folder to simplify or eliminate them. In most cases, this is only a
small benefit, as you'd expect a competent GPU driver to do the same.
However, Mali-400 can benefit significantly from optimizing away the
multiplication against a constant half4(1) coverage in Porter-Duff.
Mali-400 performance is back to normal: http://screen/3cDxdaGkYE8oBcS
Change-Id: I21fd23f91f747079cd05b082f7b3444aeabafb93
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/382476
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
This is a reland of cad44bcdd2
Original change's description:
> Use analytic AA in FillRRectOp even if the target has MSAA
>
> Bug: skia:11396
> Change-Id: Ia29fd5c9f00006274bb2aa1db96fbad57d858786
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/380016
> Commit-Queue: Chris Dalton <csmartdalton@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
Bug: skia:11396
Change-Id: I6382085ccd037b534a1ed1355c1464aaef799a44
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/380477
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Declare
This solves several issues caused by the lack of ordering guarantees in
C++; it was possible for the SkSL backend to look for the value of a
variable before its Declare() call gets processed. Moving the initial
value out of Declare should fix this whole class of problems.
Change-Id: I428fe230f1c312a0128c1f00c2a36cb95f4590a6
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/380358
Reviewed-by: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This reverts commit cad44bcdd2.
Reason for revert: Triggered an Adredo330 bug
Original change's description:
> Use analytic AA in FillRRectOp even if the target has MSAA
>
> Bug: skia:11396
> Change-Id: Ia29fd5c9f00006274bb2aa1db96fbad57d858786
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/380016
> Commit-Queue: Chris Dalton <csmartdalton@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
TBR=robertphillips@google.com,csmartdalton@google.com
Change-Id: Ic51a279f9fefe03b28182bf1222c2e26625f5bf3
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:11396
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/380476
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Makes SkImage_Gpu backed by two proxies, an original and a copy. The
image uses the original until a new render task is bound to it at which
point further uses of the image will use the copy. If the image is ever
used off a GrDirectContext we fall over to the copy. If the copy is
never used and never can be used by the next flush then the render
task that populates it is marked "skipped" and we don't perform the
copy.
Bug: skia:11208
Change-Id: Id255f4a733acc608c8a53c1a5633207aeafc404b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/366282
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
If SkImage::MakeFromTexture() fails, the reelase_ycbcrhelper will
also be called, so ycbcrHelper.release() should be always called.
Change-Id: I104e02155da653bcb465723cbead595f16459fca
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/379848
Commit-Queue: Peng Huang <penghuang@chromium.org>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
In addition to the unsurprising changes to eliminate references to
src/, we also had to tighten up some C++17-isms as they are not
permitted in public headers.
Change-Id: Ie5005a33d7a135e69fb66beca5e7a5f960dbd453
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/378496
Reviewed-by: Brian Osman <brianosman@google.com>
Ensure the extra border added to the downsampled image doesn't filter in
values from outside the source bounds.
Bug: chromium:1174354
Change-Id: I6c62eeaa57ce4e5341eab24985553f87ab0df666
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/378322
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This is a reland of 4a281dc8ee
Original change's description:
> Fix issues with insetting and outsetting quads.
>
> Need more degrees of freedom when moving 3D points to project to 2D
> points that don't fall on the projected quad edges.
>
> Need to check geometry subset in shader to avoid positive coverage in
> outset quads with nearly parallel edges.
>
> Bug: chromium:1177833
> Change-Id: I0759382d9221ba44aacd537254e08d9f2716a6af
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/372196
> Reviewed-by: Michael Ludwig <michaelludwig@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
Bug: chromium:1177833
Change-Id: Icf2b11334489c12f30e792526093c0d4bbaca5e0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/375058
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Drawing these with a color FP using fillRectWithFP made them harder
to triage.
TBR: michaelludwig@google.com
Change-Id: I97f181e861c1c24bb2224f00901eb470d868f3c4
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/375059
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Also split out the rect test cases from convex_poly_effect into their
own GM that uses GrAARectEffect directly.
Make GrAARectEffect assert that the rect used is sorted and don't copy
inverted rect test cases to the new GM
Change-Id: Ida9847390af27ac2317d324a98bd11cc904f0e6b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/374121
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This is the only place we provide a proxy from a SkImage other than
asView() and is only used in one place in the library. Add a utility
function to replace uses in tests based on asView().
Bug: skia:11208
Change-Id: Ica6eae6e5f153f208523331566acc0360925a20e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/373617
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Rename factory function from createGLSLInstance() to makeProgramImpl()
Bug: b/180759848
Bug: skia:11358
Change-Id: I095bdf1f26db5a8192fa8ab59000db4a1d561d96
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/373738
Reviewed-by: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit 4a281dc8ee.
Reason for revert: may need to only do outsetting when no all aaflags are on.
Original change's description:
> Fix issues with insetting and outsetting quads.
>
> Need more degrees of freedom when moving 3D points to project to 2D
> points that don't fall on the projected quad edges.
>
> Need to check geometry subset in shader to avoid positive coverage in
> outset quads with nearly parallel edges.
>
> Bug: chromium:1177833
> Change-Id: I0759382d9221ba44aacd537254e08d9f2716a6af
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/372196
> Reviewed-by: Michael Ludwig <michaelludwig@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com,michaelludwig@google.com
Change-Id: Idaddbdd767600a95405c028839eac4bf80a1361c
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:1177833
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/373878
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Need more degrees of freedom when moving 3D points to project to 2D
points that don't fall on the projected quad edges.
Need to check geometry subset in shader to avoid positive coverage in
outset quads with nearly parallel edges.
Bug: chromium:1177833
Change-Id: I0759382d9221ba44aacd537254e08d9f2716a6af
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/372196
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit 0fdcaa5757.
Reason for revert: Fix landed in Android
Original change's description:
> Revert "Remove (unused) gpuType from SkRuntimeEffect::Uniform"
>
> This reverts commit cc80a47566.
>
> Reason for revert: IWYU cleanup broke less IWYU-clean Android,
>
> frameworks/native/libs/renderengine/skia/filters/BlurFilter.cpp:180:17: error: variable has incomplete type 'SkRRect'
> SkRRect roundedRect;
> ^
> external/skia/include/core/SkCanvas.h:58:7: note: forward declaration of 'SkRRect'
> class SkRRect;
>
>
> Original change's description:
> > Remove (unused) gpuType from SkRuntimeEffect::Uniform
> >
> > Also remove some unnecessary includes, then IWYU.
> >
> > Change-Id: I41e88f0e661c59e75cb26e28768801b811fe8ee8
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/371140
> > Commit-Queue: Brian Osman <brianosman@google.com>
> > Reviewed-by: John Stiles <johnstiles@google.com>
> > Reviewed-by: Brian Salomon <bsalomon@google.com>
>
> TBR=bsalomon@google.com,brianosman@google.com,johnstiles@google.com
>
> Change-Id: Id655a6835ebffdb4f5f82474c287c09a69a737df
> No-Tree-Checks: true
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/371941
> Reviewed-by: Mike Klein <mtklein@google.com>
> Commit-Queue: Mike Klein <mtklein@google.com>
# Not skipping CQ checks because this is a reland.
Change-Id: I67deaee08f1dfea8d91121b3e665d2e6036b6139
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/372216
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Cq-Include-Trybots: luci.chromium.try:linux-blink-rel
Change-Id: I898fc64d8df625d22750cfe1145ba4b02acdfbb9
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/372078
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
This reverts commit cc80a47566.
Reason for revert: IWYU cleanup broke less IWYU-clean Android,
frameworks/native/libs/renderengine/skia/filters/BlurFilter.cpp:180:17: error: variable has incomplete type 'SkRRect'
SkRRect roundedRect;
^
external/skia/include/core/SkCanvas.h:58:7: note: forward declaration of 'SkRRect'
class SkRRect;
Original change's description:
> Remove (unused) gpuType from SkRuntimeEffect::Uniform
>
> Also remove some unnecessary includes, then IWYU.
>
> Change-Id: I41e88f0e661c59e75cb26e28768801b811fe8ee8
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/371140
> Commit-Queue: Brian Osman <brianosman@google.com>
> Reviewed-by: John Stiles <johnstiles@google.com>
> Reviewed-by: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com,brianosman@google.com,johnstiles@google.com
Change-Id: Id655a6835ebffdb4f5f82474c287c09a69a737df
No-Tree-Checks: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/371941
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Also remove some unnecessary includes, then IWYU.
Change-Id: I41e88f0e661c59e75cb26e28768801b811fe8ee8
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/371140
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Previously, a manual codeAppend call was required to add a statement. We
now automatically invoke codeAppend when a statement is destroyed.
Change-Id: I09eaf230b1d58242c3ff6abb85e970ed5ed3bce2
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/371141
Auto-Submit: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
Small diffs in a GM -- due to the dual nature of kMedium (cpu and gpu)
Another reason to stop using it, and switch to the more-explicit
sampling.
Bug: skia:7650
Change-Id: Ie7575071b19778626da7f94804abaaa11861a050
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/370259
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
This reverts commit e89b50ae05.
Reason for revert: landed Android fix at http://ag/13544365 (master) and
http://ag/13554983 (sc-dev)
Original change's description:
> Android roll broke with a compilation error:
> frameworks/base/libs/hwui/jni/Shader.cpp:243:37: error: no matching function for call to 'get'
> sk_sp<SkRuntimeEffect> effect = std::get<0>(result)
>
> Revert "Remove deprecated form of SkRuntimeEffect::Make."
>
> This reverts commit 1cda194366.
>
> Reason for revert: <INSERT REASONING HERE>
>
> Original change's description:
> > Remove deprecated form of SkRuntimeEffect::Make.
> >
> > Chromium has migrated to the new API at https://crrev.com/c/2675855.
> >
> > Change-Id: Id4af77db2c462348e8031d28f56e543ad619c19c
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/367060
> > Reviewed-by: Brian Osman <brianosman@google.com>
> > Commit-Queue: Brian Osman <brianosman@google.com>
> > Commit-Queue: John Stiles <johnstiles@google.com>
> > Auto-Submit: John Stiles <johnstiles@google.com>
>
> TBR=mtklein@google.com,brianosman@google.com,johnstiles@google.com
>
> Change-Id: Ie18f865f3b7f5b0263db1e52b19cf6faa0500fdd
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368616
> Reviewed-by: Stan Iliev <stani@google.com>
> Commit-Queue: Stan Iliev <stani@google.com>
TBR=mtklein@google.com,brianosman@google.com,stani@google.com,johnstiles@google.com
Change-Id: I9d679013cb275dc80aaaa977b7f1f4da31f36d1e
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/369037
Reviewed-by: John Stiles <johnstiles@google.com>
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Implement support for COLRv1 color gradient vector forms. COLR v1 is an
extension to the OpenType COLR tables that introduces support for
gradients, transforms and compositing. [1]
COLRv1 fonts contain an OpenType COLR table with format v1. In a COLR v1
table, glyphs are defined by a directed, acyclic graph of Paint
operations. The task for the Skia implementation is to extract the COLR
v1 information from the font using FreeType's COLRv1 API, then traverse
the glyph graph and translate information from the font into Skia
operations on SkCanvas.
Care needs to be taken for transformations to work correctly. FreeType
sends a top level transform that includes the scaling from font units to
actual glyph size, as well as optional transforms configured on FreeType
using FT_Set_Transform. This is set up as the starting transform at the
beginning of drawing a COLRv1 glyph. At the stage of setting a clip for
a PaintGlyph operation, the glyph outline is retrieved from FreeType
unscaled and untransformed. Since the starting transformation is applied
to the SkCanvas, the unscaled glyph is properly scaled and positioned.
Similarly, computing the initial bounding box for the COLRv1 glyph needs
to consider transformations. COLRv1 glyphs have a base glyph entry in
the glyf table which can use a minimum of two points for defining a
bounding box. This bounding box is an imaged rectangle enclosing those
two points at the identity transform. We need to compute the bounding
box scaled, but at identity transform, then make a rectangle from it,
that we then transform so that we get a large enough area to paint
in. If those two points from the glyf table would be transformed first,
then we would compute the bounding box, the resulting bounding box ends
up too small.
As a test font, add a version of the samples-glyf_colr_1.ttf from [2]
with one glyph added for testing PaintColrGlyph functionality and
compositions.
Add a basic GM test that produces color glyphs untransformed, with
skew and with rotation and combinations of those.
[1] https://github.com/googlefonts/colr-gradients-spec/
[2] https://github.com/googlefonts/color-fonts
Bug: skia:11264
Change-Id: I8357cd0c7ac0039bb2eac18f21fa343bf61871eb
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/300558
Commit-Queue: Dominik Röttsches <drott@chromium.org>
Commit-Queue: Ben Wagner <bungeman@google.com>
Auto-Submit: Dominik Röttsches <drott@chromium.org>
Reviewed-by: Ben Wagner <bungeman@google.com>
This also adds the relevant Start() / End() calls so that the DSL
is put into the correct state.
Change-Id: I844b0ab5dff06e3f7b0a69458bf4442a5da0f33e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/364857
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
https://docs.google.com/document/d/1z9ZODlZX4XXbfOjh2t1-1Z7FJcCCcOfbrEjiFzPE4vg/edit?usp=sharing&resourcekey=0-Io-07D1zm1yKMQN2UAiYBw
This approach lets us write color filters that want to work in
particular color spaces and alpha formats and adapt them to our normal
pipeline. It should work with pre-canned and runtime effects, and we
can do the same sort of thing for shaders too.
Some features are designed for using this with the high-contrast filter:
- ability to change working tf and gamut separately: as written the
HC effect only wants to work in linear space without changing
gamut, which is I bet will be a common desired mode. But other
effects may want to fully change the working color space, e.g. to
sRGB or XYZ.
- adapting the alpha type to unpremul is mostly a flourish: you could
do it yourself in sksl, but we might as well do it if doing other
transforms anyway (it's cheaper this way than doing it yourself),
and this may make it easier to adapt non-runtime effects.
(I bet most color filters actually want to be unpremul.)
I briefly also included a knob to control how this effect treats a
nullptr dst color space, but I've come back around to that not being a
parameter. I think this is a situation where we know best.
New GM to demo.
Cq-Include-Trybots: luci.chromium.try:linux-blink-rel
Change-Id: I420e3a2aa648f314c019a98bfdcd44e810a3dac6
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368336
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Mike Reed <reed@google.com>
The fuzzer test case was:
-15,-11 ------> huge,-11
^ |
| v
-15,5000 <------ huge,5000
where the 'huge' x-value caused the accumulated perimeter to overflow.
Bug:1175370, skia:11307
Change-Id: Ic6760d38c29c440d2d4fcb225a5c556e56a992f6
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368317
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Bug: chromium:1174186
Change-Id: I91a88d2d57150dee37f08bc4270d399abfd0d60d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368497
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
frameworks/base/libs/hwui/jni/Shader.cpp:243:37: error: no matching function for call to 'get'
sk_sp<SkRuntimeEffect> effect = std::get<0>(result)
Revert "Remove deprecated form of SkRuntimeEffect::Make."
This reverts commit 1cda194366.
Reason for revert: <INSERT REASONING HERE>
Original change's description:
> Remove deprecated form of SkRuntimeEffect::Make.
>
> Chromium has migrated to the new API at https://crrev.com/c/2675855.
>
> Change-Id: Id4af77db2c462348e8031d28f56e543ad619c19c
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/367060
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: Brian Osman <brianosman@google.com>
> Commit-Queue: John Stiles <johnstiles@google.com>
> Auto-Submit: John Stiles <johnstiles@google.com>
TBR=mtklein@google.com,brianosman@google.com,johnstiles@google.com
Change-Id: Ie18f865f3b7f5b0263db1e52b19cf6faa0500fdd
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368616
Reviewed-by: Stan Iliev <stani@google.com>
Commit-Queue: Stan Iliev <stani@google.com>
Glyph advances are based on the origin, not on the glyph bounding box.
Draw the tick marks for the advances starting from where the run of
glyphs was drawn.
Change-Id: I217c10a79835ad46e0178bb77ab8e575e36704ca
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368418
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
Chromium has migrated to the new API at https://crrev.com/c/2675855.
Change-Id: Id4af77db2c462348e8031d28f56e543ad619c19c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/367060
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Useful in client code to document what we're doing as we switch away
from SkFilterQuality.
Change-Id: I05737beb99a567a46a3c3ec418b7f7da71b1ff62
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/366723
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Mike Reed <reed@google.com>
I think this was the rough idea? I'm a little fuzzy
on the SkMatrixProvider overloads that concat... I
really don't have a head for matrix transforms.
Cq-Include-Trybots: luci.chromium.try:linux-blink-rel
Bug: skia:11260
Change-Id: I6eb8e4397da035d17fe6b96e5c5494dce0483e26
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/365520
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
This is a reland of fa87f9c7b9
Went back to original approach of checking isFramebufferOnly outside
GrCopyRenderTask::Make().
Original change's description:
> Add backend texture and backend render target versions snapshot GMs
>
> GPU may behave differently depending on whether the SkSurface backing
> store is wrapped and whether it is a texture or not.
>
> Bug: skia:11208
> Change-Id: I5e9921d56c0840cfe34ed2926a55be7460409b23
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/364639
> Reviewed-by: Adlai Holler <adlai@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
Bug: skia:11208
Change-Id: I7af6078e904fdd772b97ad3a27e26cab577fc6a3
Cq-Include-Trybots: luci.skia.skia.primary:Test-Ubuntu18-Clang-Golo-GPU-QuadroP400-x86_64-Debug-All-PreAbandonGpuContext
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/365702
Reviewed-by: Adlai Holler <adlai@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Also adds an example particle system that uses uniforms, and an instance
of the particles GM that draws it.
Change-Id: I64e2514fd17c8ce615b4e13b9f82424f80b8424e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/356840
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
This reverts commit fa87f9c7b9.
Reason for revert: assert on n5x/n7
Original change's description:
> Add backend texture and backend render target versions snapshot GMs
>
> GPU may behave differently depending on whether the SkSurface backing
> store is wrapped and whether it is a texture or not.
>
> Bug: skia:11208
> Change-Id: I5e9921d56c0840cfe34ed2926a55be7460409b23
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/364639
> Reviewed-by: Adlai Holler <adlai@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com,robertphillips@google.com,adlai@google.com
Change-Id: Id1488586e2d17cdce35f95ea6aa9b2bffd9218d0
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:11208
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/365698
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Make SkImage_Gpu and SkImage_GpuYUVA have their own implementations
rather than sharing one in SkImage_GpuBase.
New function takes a GrImageTexGenPolicy to enable caller to
force a new texture to be made and choose it's budgeting status rather
than receive a cached view or a view owned by the image.
It also communicates any color type changes when converting a non-
texture image to a texture.
Bug: skia:11208
Change-Id: I6b389442bf9752276a83b21021070e3190610cd7
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/361356
Reviewed-by: Greg Daniel <egdaniel@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
GPU may behave differently depending on whether the SkSurface backing
store is wrapped and whether it is a texture or not.
Bug: skia:11208
Change-Id: I5e9921d56c0840cfe34ed2926a55be7460409b23
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/364639
Reviewed-by: Adlai Holler <adlai@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
The equivalent functionality is available in
include/effects/SkImageFilters.h via SkImageFilters::MatrixTransform.
Bug: skia:11230
Change-Id: I77b78d508d653a32c913a7599f1004ab634e3e6d
Docs-Preview: https://skia.org/?cl=361497
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/361497
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Auto-Submit: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Mike Reed <reed@google.com>
This reverts commit ad8ce4dbb2.
Change-Id: I26077c56fa69e60a003359fa9da758bbfd6a3425
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/363777
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
