Change-Id: I871dd5eea4496e87c206b46d9eae81cb521b11ce
Reviewed-on: https://skia-review.googlesource.com/65103
Reviewed-by: Hal Canary <halcanary@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Adds the flag and a disables caching on the CCPR bots.
Bug: skia:
Change-Id: Icb85e77f89634dda1d419dacac5b8a93340723f0
Reviewed-on: https://skia-review.googlesource.com/59740
Reviewed-by: Eric Boren <borenet@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Allows benchmarks to override GrContextOptions.
Removes the ability to use the same GrContext for all benchmarks in a config.
Change-Id: I5ab9f6e81055451ac912a66537843d1a49f3b479
Reviewed-on: https://skia-review.googlesource.com/34080
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
On ANGLE, at least, this frame gives us much more consistent results.
Bug: skia:
Change-Id: Ifdecc8451ef51490c08057645214738180b1a366
Reviewed-on: https://skia-review.googlesource.com/57884
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Move the check for kFailedLoops above code that times the benchmark.
This matches the comment ("Can't be timed") and prevents an infinite
loop.
Bug: skia:6774
Change-Id: Iacdc1ca1d11afcf05afac60e4eb0d8d9a12f800e
Reviewed-on: https://skia-review.googlesource.com/53803
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
This reverts commit 88757dacd4.
Reason for revert: Still seems to be failing Chromium "telemetry_perf_unittests (with patch) on Android" on android_n5x_swarming_rel.
Original change's description:
> guard old apis for querying byte-size of a bitmap/imageinfo/pixmap
>
> Now with legacy behavior for allocpixels
>
> This was reverted, so the current CL is a "fix" on top of ...
> https://skia-review.googlesource.com/c/skia/+/50980
>
> Related update to Chrome (in preparation for this change)
> https://chromium-review.googlesource.com/c/chromium/src/+/685719
>
> Bug: skia:
> Change-Id: I4b370ee7e95083ab27421f008132219c9c7b86e9
> Reviewed-on: https://skia-review.googlesource.com/51341
> Reviewed-by: Florin Malita <fmalita@chromium.org>
> Commit-Queue: Mike Reed <reed@google.com>
TBR=fmalita@chromium.org,reed@google.com
Change-Id: I827a0ca1d1e3909e648fde3342cdb8601d34da8d
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/52381
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
This reverts commit 98a6216b18.
Reason for revert: breaking the chrome roll. Looks like they may be writing data to create an image across all the row bytes and thus writing to unalloced data on the last row. Link to example failing bot:
https://build.chromium.org/p/tryserver.chromium.win/builders/win_chromium_rel_ng/builds/539960
Original change's description:
> guard old apis for querying byte-size of a bitmap/imageinfo/pixmap
>
> Previously we had size_t and uint64_t variations.
>
> The new (simpler) API always..
> - returns size_t, or 0 if the calculation overflowed
> - returns the trimmed size (does not include rowBytes padding for the last row)
>
> Bug: skia:
> Change-Id: I05173e877918327c7b207d2f7f1ab0db36892e2e
> Reviewed-on: https://skia-review.googlesource.com/50980
> Commit-Queue: Mike Reed <reed@google.com>
> Reviewed-by: Florin Malita <fmalita@chromium.org>
> Reviewed-by: Leon Scroggins <scroggo@google.com>
TBR=mtklein@google.com,herb@google.com,scroggo@google.com,fmalita@chromium.org,reed@google.com
Change-Id: I726f6ab1b36b14979ba6f37105e0a469b3f0dbc0
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/51262
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
Previously we had size_t and uint64_t variations.
The new (simpler) API always..
- returns size_t, or 0 if the calculation overflowed
- returns the trimmed size (does not include rowBytes padding for the last row)
Bug: skia:
Change-Id: I05173e877918327c7b207d2f7f1ab0db36892e2e
Reviewed-on: https://skia-review.googlesource.com/50980
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Otherwise, the first few benches' measurements will be inaccurate.
For example, without this CL, the first few measurements are:
337ns, 566µs, 1000µs, ... without "--ms 1000" arg
211ns, 285µs, 874µs, ... with "--ms 1000" arg
With this CL, the first few measurements are:
195ns, 296µs, 1.03ms, ... without "--ms 1000" arg
204ns, 280µs, 859µs, ... with "--ms 1000" arg
In the example above, the first two measurements are vastly (>50%)
different without this CL. I think that's the reason why I keep
using "--ms 1000" arg locally. But it's really only necessary for
the first bench to warm up nanobench. It's a waste to apply
"--ms 1000" to all the following benches.
Bug: skia:
Change-Id: I1924ba3ff9185ed89aeda72794fafd1fe6625eef
Reviewed-on: https://skia-review.googlesource.com/49742
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
Bug: skia:
Change-Id: Ic4073aa17a04e8b400cc4a9db9a0669ee4a5c894
Reviewed-on: https://skia-review.googlesource.com/44203
Commit-Queue: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
These are transient, so need to be copied.
Bug: skia:
Change-Id: Id24db0b96f343ecd034dd015da6e19ea61579b56
Reviewed-on: https://skia-review.googlesource.com/41741
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Also add new paragraph about using systrace correctly
Docs-Preview: https://skia.org/?cl=41502
Change-Id: I114c14cc2e87a8b72aec46d8c354d3ea877a41ab
Reviewed-on: https://skia-review.googlesource.com/41502
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Re-land of: https://skia-review.googlesource.com/36560
All information needed by the thread is captured by the prepare
callback object, the lambda captures a pointer to that, and does the
mask render. Once it's done, it signals the semaphore (also owned by the
callback). The callback defers the semaphore wait even longer (into the
ASAP upload), so the odds of waiting for the thread are REALLY low.
Also did a bunch of cleanup along the way, and put in some trace markers
so we can monitor how well this is working.
Traces of a GM that includes GPU and SW path rendering (path-reverse):
Original:
https://screenshot.googleplex.com/f5BG3901tQg.png
Threaded, with wait in the callback (notice pre flush callback blocking):
https://screenshot.googleplex.com/htOSZFE2s04.png
Current version, with wait deferred to ASAP upload function:
https://screenshot.googleplex.com/GHjD0U3C34q.png
Bug: skia:
Change-Id: Idb92f385590749f41328a9aec65b2a93f4775079
Reviewed-on: https://skia-review.googlesource.com/40775
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Motivated by wanting to speed-up A8 blits in general (and at the moment, aarect blits). More to come in these areas.
Bug: skia:
Change-Id: I45e8ef951b8e89a825af72b1918049be10920137
Reviewed-on: https://skia-review.googlesource.com/39401
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Mike Reed <reed@google.com>
This reverts commit 76323bc061.
Reason for revert: Breaking NUC bots in threaded gm comparison:
https://chromium-swarm.appspot.com/task?id=382e589753187f10&refresh=10
Original change's description:
> Threaded generation of software paths
>
> All information needed by the thread is captured by the prepare
> callback object, the lambda captures a pointer to that, and does the
> mask render. Once it's done, it signals the semaphore (also owned by the
> callback). The callback defers the semaphore wait even longer (into the
> ASAP upload), so the odds of waiting for the thread are REALLY low.
>
> Also did a bunch of cleanup along the way, and put in some trace markers
> so we can monitor how well this is working.
>
> Traces of a GM that includes GPU and SW path rendering (path-reverse):
>
> Original:
> https://screenshot.googleplex.com/f5BG3901tQg.png
> Threaded, with wait in the callback (notice pre flush callback blocking):
> https://screenshot.googleplex.com/htOSZFE2s04.png
> Current version, with wait deferred to ASAP upload function:
> https://screenshot.googleplex.com/GHjD0U3C34q.png
>
> Bug: skia:
> Change-Id: I3d5a230bbd68eb35e1f0574b308485c691435790
> Reviewed-on: https://skia-review.googlesource.com/36560
> Commit-Queue: Brian Osman <brianosman@google.com>
> Reviewed-by: Brian Salomon <bsalomon@google.com>
TBR=egdaniel@google.com,mtklein@google.com,bsalomon@google.com,robertphillips@google.com,brianosman@google.com
Change-Id: Icac0918a3771859f671b69ae07ae0fedd3ebb3db
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/38560
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
All information needed by the thread is captured by the prepare
callback object, the lambda captures a pointer to that, and does the
mask render. Once it's done, it signals the semaphore (also owned by the
callback). The callback defers the semaphore wait even longer (into the
ASAP upload), so the odds of waiting for the thread are REALLY low.
Also did a bunch of cleanup along the way, and put in some trace markers
so we can monitor how well this is working.
Traces of a GM that includes GPU and SW path rendering (path-reverse):
Original:
https://screenshot.googleplex.com/f5BG3901tQg.png
Threaded, with wait in the callback (notice pre flush callback blocking):
https://screenshot.googleplex.com/htOSZFE2s04.png
Current version, with wait deferred to ASAP upload function:
https://screenshot.googleplex.com/GHjD0U3C34q.png
Bug: skia:
Change-Id: I3d5a230bbd68eb35e1f0574b308485c691435790
Reviewed-on: https://skia-review.googlesource.com/36560
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Adjust the configs specified by recipes to avoid the new error.
Change-Id: I23e31355e2faaab919d92abdb37a6f70cd2da1ff
Reviewed-on: https://skia-review.googlesource.com/32862
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
DAA is:
1. Much simpler than AAA.
SkScan_AAAPath.cpp is about 1700 lines.
SkScan_DAAPath.cpp is about 300 lines.
The whole DAA CL is only about 800 lines.
2. Much faster than AAA for complicated paths.
The speedup applies to GL backend (including ccpr)!
Here's the frame time of 'SampleApp --slide Chart' on macbook pro:
AAA-raster: 33ms
DAA-raster: 21ms
AAA-gl: 30ms
DAA-gl: 20ms
AAA-ccpr: 18ms
DAA-ccpr: 12ms
My linux desktop doesn't have SSE3 so the speedup is smaller
(~25% for Chart). I believe that DAA is so fast that I can enable
it for any paths (AAA is not enabled by default for complicated
paths because it is slow; hence our older supersampling scan
converter is used for stroking on Chart for AAA-xxx config.)
3. The SkCoverageDelta is suitable for threaded backend with
out-of-order concurrent scan conversion as commented in the source
code. Maybe we can also just send deltas to GPU.
4. Similar to most analytic path renderers, the quality is on the best
ground-truth level, unless there are intersections within a pixel.
The intersections look good to my eyes although theoretically that
could be arbitrary far from the ground truth (see my AAA slides).
5. For simple paths, such as circle, triangle, rrect, etc., DAA is
slower than AAA. But DAA is faster than our older supersampling
scan converter in most cases. As those simple paths usually don't
constitute the bottleneck of a picture (skp or svg), I strongly
recommend use DAA.
6. DAA also heavily favors blitMask so it may work quite well with
SkRasterPipeline and SkRasterPipelineBlitter.
Finally, please check https://skia-review.googlesource.com/c/22420/
which accelerate DAA by specializing blitCoverageDeltas for
SkARGB32_Blitter and SkARGB32_Black_Blitter. It brings a little(<5%)
speedup. But I couldn't figure out how to reduce the duplicate code
so I don't intend to land it.
Bug: skia:
Change-Id: I3b7ed6a727447922e645b1acb737a506e7c09a4c
Reviewed-on: https://skia-review.googlesource.com/19666
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Cary Clark <caryclark@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
Will need guards for android (at least)
Bug: skia:
Change-Id: I2bb8e656997984489ef1f2e41cd3d301c4e7b947
Reviewed-on: https://skia-review.googlesource.com/26040
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Reed <reed@google.com>
Bug: skia:
Change-Id: I401c5a9885c348aa424ab07b094acecddb209490
Reviewed-on: https://skia-review.googlesource.com/25860
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Not yet thread safe (so it forces threading off).
Builds JSON on the fly, so overhead is certainly bad.
Plan to fix all of that, but this at least "works".
There is now one tracing flag: 'trace'.
- 'debugf' installs the SkDebugf tracer.
- 'atrace' installs the Android ATrace tracer.
- Any other value is interpreted as a filename, and
produces a JSON file for chrome://tracing.
All three modes work in DM, nanobench, and Viewer.
Bug: skia:
Change-Id: I3fbc22382b99418a508c670be2770195c0a1c364
Reviewed-on: https://skia-review.googlesource.com/24781
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Instead of query and maxSampleCount and using that to cap, we now have
each config store its supported values and when requested returns either
the next highest or equal supported value, or if non the max config supported.
Bug: skia:
Change-Id: I8802d44c13b3b1703ee54a7e69b82102d4b8dc2d
Reviewed-on: https://skia-review.googlesource.com/24302
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Also adds more trace events to GPU backend.
Change-Id: Ifa5f0cd4b1fd582f0cc30d37d9e6414dc498c75d
Reviewed-on: https://skia-review.googlesource.com/24622
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit 742a3e298f.
Reason for revert: Breaking Android roll:
frameworks/base/core/jni/android/graphics/BitmapFactory.cpp:453:18: error: no member named 'fColorPtr' in 'SkAndroidCodec::AndroidOptions'
codecOptions.fColorPtr = colorPtr;
~~~~~~~~~~~~ ^
frameworks/base/core/jni/android/graphics/BitmapFactory.cpp:454:18: error: no member named 'fColorCount' in 'SkAndroidCodec::AndroidOptions'
codecOptions.fColorCount = colorCount;
~~~~~~~~~~~~ ^
Original change's description:
> Remove support for decoding to kIndex_8
>
> Fix up callsites, and remove tests that no longer make sense.
>
> Bug: skia:6828
> Change-Id: I2548c4b7528b7b1be7412563156f27b52c9d4295
> Reviewed-on: https://skia-review.googlesource.com/21664
> Reviewed-by: Derek Sollenberger <djsollen@google.com>
> Commit-Queue: Leon Scroggins <scroggo@google.com>
TBR=djsollen@google.com,scroggo@google.com
Change-Id: I1bc669441f250690884e75a9a61427fdf75c6907
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:6828
Reviewed-on: https://skia-review.googlesource.com/22120
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
Fix up callsites, and remove tests that no longer make sense.
Bug: skia:6828
Change-Id: I2548c4b7528b7b1be7412563156f27b52c9d4295
Reviewed-on: https://skia-review.googlesource.com/21664
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
This makes it trivial to copy/paste into spreadsheets for sorting/diffing
Bug: skia:
Change-Id: I02c920e2b8be8f59270da9fb9bb3e6763987e0bc
Reviewed-on: https://skia-review.googlesource.com/21378
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Mike Reed <reed@google.com>
Adds a bitfield to GrContextOptions that masks out path renderers.
Adds commandline flags support to set this bitfield in tools apps.
Removes GrGLInterfaceRemoveNVPR since we can now accomplish the same
thing in the context options.
BUG=skia:
Change-Id: Icf2a4df36374b3ba2f69ebf0db56e8aedd6cf65f
Reviewed-on: https://skia-review.googlesource.com/8786
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Also changes the behavior of these flags to only override their
corresponding context options when set, and to leave them unchanged
when not set.
BUG=skia:
Change-Id: I09f6be09997594fa888d9045dd4901354ef3f880
Reviewed-on: https://skia-review.googlesource.com/8780
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
BUG=skia:
Change-Id: I01c5e1874c9a034febc64e25b3aaafb5050393a6
Reviewed-on: https://skia-review.googlesource.com/8021
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Matt Sarett <msarett@google.com>
The weird foo_mains are no longer needed when we build with GN.
CQ_INCLUDE_TRYBOTS=skia.primary:Build-Mac-Clang-arm-Debug-iOS
Change-Id: Iae50696741e0dc277d96dda4968a1ae41cb17c8a
Reviewed-on: https://skia-review.googlesource.com/8064
Commit-Queue: Mike Klein <mtklein@chromium.org>
Reviewed-by: Stephan Altmueller <stephana@google.com>
CQ_INCLUDE_TRYBOTS=skia.primary:Test-iOS-Clang-iPadMini4-GPU-GX6450-arm-Release
Change-Id: I7beadad742bc9444491c7a315a827297a636d70d
Reviewed-on: https://skia-review.googlesource.com/8049
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Just like DM.
CQ_INCLUDE_TRYBOTS=skia.primary:Test-iOS-Clang-iPadMini4-GPU-GX6450-Arm7-Debug,Build-Mac-Clang-arm64-Debug-GN_iOS
Change-Id: I4af3fa1813e3b7ee48407096e91373b5fee569c7
Reviewed-on: https://skia-review.googlesource.com/7824
Reviewed-by: Hal Canary <halcanary@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Generate targets for dm and nanobench from ninja and add them to the
generated Android.bp file.
Remove nanobenchAndroid and SkAndroidSDKCanvas. These rely on HWUI
internals and are currently unused.
Update gyp file references to removed files, just in case.
Change-Id: Ic6ae18a70bfd0c33804e7996d077f2081dfdfe07
Reviewed-on: https://skia-review.googlesource.com/7635
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Leon Scroggins <scroggo@google.com>
These may be better at -fsanitize=object-size.
No need to loop more than once in nanobench for these bots.
CQ_INCLUDE_TRYBOTS=skia.primary:Build-Ubuntu-Clang-x86_64-Release-ASAN,Perf-Ubuntu-Clang-GCE-CPU-AVX2-x86_64-Release-ASAN,Perf-Ubuntu-Clang-Golo-GPU-GT610-x86_64-Release-ASAN,Test-Ubuntu-Clang-GCE-CPU-AVX2-x86_64-Release-ASAN,Test-Ubuntu-Clang-Golo-GPU-GT610-x86_64-Release-ASAN
Change-Id: If89e94390d473434717cfe28de6be9055b68d8d4
Reviewed-on: https://skia-review.googlesource.com/7278
Reviewed-by: Herb Derby <herb@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
The only difference is that we now also put the guard flag
SK_SUPPORT_LEGACY_AAA in SkUserConfig.h. Previously, SkAnalyticEdge.cpp doesn't
get that flag from SkScan.h and that caused many problems.
BUG=skia:
TBR=reed@google.com,caryclark@google.com
Change-Id: I134bb76cebd6fffa712f438076668765321bba3b
Reviewed-on: https://skia-review.googlesource.com/6992
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
This reverts commit b46fff60bc.
Reason for revert: possible chromium cc unit tests failure
Change-Id: Ie174c55e4d0fc3ae45854b5897ba26b7ad5a9c13
Reviewed-on: https://skia-review.googlesource.com/6981
Commit-Queue: Yuqian Li <liyuqian@google.com>
Reviewed-by: Yuqian Li <liyuqian@google.com>
The only difference is that we now put the guard flag SK_SUPPORT_LEGACY_AAA in
SkUserConfig.h instead of SkScan.h. Previously, SkAnalyticEdge.cpp doesn't get
that flag from SkScan.h and that caused many problems.
BUG=skia:
TBR=reed@google.com,caryclark@google.com
Change-Id: I7b89d3cb64ad71715101d2a5e8e77be3a8a6fa16
Reviewed-on: https://skia-review.googlesource.com/6972
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
This reverts commit 89a0e72287.
Reason for revert: <INSERT REASONING HERE>
Original change's description:
> Implement Analytic AA for General Paths (with Guard against Chrome)
>
> I've set up a SK_SUPPORT_LEGACY_AAA flag to guard against Chromium layout tests. I also set that flag in this CL so theoretically this CL won't trigger any GM changes. I'll use this to verify my guard, and remove that flag and actually enables concave AAA in a future CL.
>
> When enabled, for most simple concave paths (e.g., rectangle stroke, rrect stroke, sawtooth, stars...), the Analytic AA achieves 1.3x-2x speedup, and they look much prettier. And they probably are the majority in our use cases by number. But they probably are not the majority by time cost; a single complicated path may cost 10x-100x more time to render than a rectangle stroke... For those complicated paths, we fall back to supersampling by default as we're likely to be 1.1-1.2x slower and the quality improvement is not visually significant. However, one can use gSkForceAnalyticAA to disable that fallback.
>
> BUG=skia:
>
> Change-Id: If9549a3acc4a187cfaf7eb51890c148da3083d31
> Reviewed-on: https://skia-review.googlesource.com/6091
> Reviewed-by: Mike Reed <reed@google.com>
> Commit-Queue: Yuqian Li <liyuqian@google.com>
>
TBR=caryclark@google.com,liyuqian@google.com,reed@google.com
BUG=skia:
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Change-Id: I13c05aaa1bcb14956bd0fe01bb404e41be75af22
Reviewed-on: https://skia-review.googlesource.com/6961
Commit-Queue: Yuqian Li <liyuqian@google.com>
Reviewed-by: Yuqian Li <liyuqian@google.com>
