Also tweak when we report OOM - AFL-fuzz is fine, but libfuzzer should
abort, not exit.
Bug: skia:
Change-Id: Ic19277bbceec5e7c0ac966d6d9ac677bcfebcfae
Reviewed-on: https://skia-review.googlesource.com/93201
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Hal Canary <halcanary@google.com>
Also refactor a few things to make it easier to use oss-fuzz.
Bug: skia:
Change-Id: Ie518a6cfc7d57a347b5d09089379f986d33f8b7f
Reviewed-on: https://skia-review.googlesource.com/41740
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
After this CL, we have 3.5 options for fuzzing ImageFilter
1. Create it from API calls and then draw it
fuzz -t api -n ImageFilter -b [input]
2. Deserialize a fuzzed stream into an ImageFilter (this is
what Chromium's filter_fuzz_stub does)
fuzz -t filter_fuzz -b [input]
3. Create an ImageFilter from API calls, serialize it, apply
some mutations to the stream, deserialize it, then draw it.
fuzz -t api -n SerializedImageFilter -b [input]
3.5 Create ImageFilters as part of our more general canvas
fuzzers.
fuzz -t api -n RasterN32Canvas -b [input] (and others)
Previously, the SerializedImageFilter had its own, slightly
stale and prone to stack-overflow way of making an image filter.
This CL re-uses what we already do for Canvas fuzzing and removes
that dead code.
Additionally, there is a way to easily generate a corpus
for the filter_fuzz type, via SerializedImageFilter.
Bug: skia:
Change-Id: I31bb4ffce2abf1c1a6d0a7000e5aceb8d7b38b65
Reviewed-on: https://skia-review.googlesource.com/92142
Reviewed-by: Hal Canary <halcanary@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
This cleans up the build so commandline flags defined in tools/*.cpp
don't get globbed into the fuzzer's.
Bug: skia:
Change-Id: I5994aa5bf75686641baf0cf97fd81141f0ac6f3a
Reviewed-on: https://skia-review.googlesource.com/92680
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Add a flag that hints, which lattice rectangles are solid colors.
Draw solid rectangles and 1x1 rectangles with drawRect.
Test: Measured performance of a ninepatch drawn by HWUI
Bug: b/69796044
Change-Id: Ib3b00ca608da42fa9f2d2038cc126a978421ec7c
Reviewed-on: https://skia-review.googlesource.com/79821
Commit-Queue: Stan Iliev <stani@google.com>
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Bug: skia:
Change-Id: I054560b66c6cde346d939015326d8547879d2c4b
Reviewed-on: https://skia-review.googlesource.com/81160
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Reed <reed@google.com>
Change-Id: I0ea4f96263aec4b272ead5f541ee304942499f68
Reviewed-on: https://skia-review.googlesource.com/79161
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Hal Canary <halcanary@google.com>
This was created by looking at warnings produced by clang's
-Wzero-as-null-pointer-constant. This updates most issues in
Skia code. However, there are places where GL and Vulkan want
pointer values which are explicitly 0, external headers which
use NULL directly, and possibly more uses in un-compiled
sources (for other platforms).
Change-Id: Id22fbac04d5c53497a53d734f0896b4f06fe8345
Reviewed-on: https://skia-review.googlesource.com/39521
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
On desktop, this saves just over 5% of the time in the SkSL compiler.
As written, the code will now build either way, so it's much easier to
switch back (or even have some platforms use SkString, if that's ever
required).
Bug: skia:
Change-Id: I634f26a4f6fcb404e59bda6a5c6a21a9c6d73c0b
Reviewed-on: https://skia-review.googlesource.com/34381
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Will need guards for android (at least)
Bug: skia:
Change-Id: I2bb8e656997984489ef1f2e41cd3d301c4e7b947
Reviewed-on: https://skia-review.googlesource.com/26040
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Reed <reed@google.com>
This reverts commit 742a3e298f.
Reason for revert: Breaking Android roll:
frameworks/base/core/jni/android/graphics/BitmapFactory.cpp:453:18: error: no member named 'fColorPtr' in 'SkAndroidCodec::AndroidOptions'
codecOptions.fColorPtr = colorPtr;
~~~~~~~~~~~~ ^
frameworks/base/core/jni/android/graphics/BitmapFactory.cpp:454:18: error: no member named 'fColorCount' in 'SkAndroidCodec::AndroidOptions'
codecOptions.fColorCount = colorCount;
~~~~~~~~~~~~ ^
Original change's description:
> Remove support for decoding to kIndex_8
>
> Fix up callsites, and remove tests that no longer make sense.
>
> Bug: skia:6828
> Change-Id: I2548c4b7528b7b1be7412563156f27b52c9d4295
> Reviewed-on: https://skia-review.googlesource.com/21664
> Reviewed-by: Derek Sollenberger <djsollen@google.com>
> Commit-Queue: Leon Scroggins <scroggo@google.com>
TBR=djsollen@google.com,scroggo@google.com
Change-Id: I1bc669441f250690884e75a9a61427fdf75c6907
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:6828
Reviewed-on: https://skia-review.googlesource.com/22120
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
Fix up callsites, and remove tests that no longer make sense.
Bug: skia:6828
Change-Id: I2548c4b7528b7b1be7412563156f27b52c9d4295
Reviewed-on: https://skia-review.googlesource.com/21664
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
Previously, SkGifCodec treated an error in the LZW data as incomplete,
since we can still draw the partially decoded image. But a client doing
incremental decodes needs to distinguish this from truly incomplete
data. In the case of an error, the client should not attempt to provide
more data and decode again.
Add kErrorInInput, and return it when SkGifCodec sees a fatal error.
Treat it the same as kIncompleteInput when it comes to filling and DM.
Bug: skia:6825
Change-Id: Ic6ce3a62c0b065ed34dcd8006309e43272a3db9f
Reviewed-on: https://skia-review.googlesource.com/21530
Commit-Queue: Leon Scroggins <scroggo@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Chris Blume <cblume@chromium.org>
AFAICT none of our clients use this entry point and it is tangling up efforts to add a new parameter to the BlurImageFilter.
Change-Id: I494634db98a1d246854a5e3735380fbe55f425c2
Reviewed-on: https://skia-review.googlesource.com/20837
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Realized that a pending CL needed to add (yet another) private type to SkRecords.h, but w/o this CL I'd be forced to move that header also into private. This change frees us up to not have transitive exposure for types that need to be recorded.
Bug: skia:
Change-Id: Id79f1c2e44ba85e063c1360cf96c92de6397ca2b
Reviewed-on: https://skia-review.googlesource.com/17031
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Many tests and examples use drawText with
a guess of how long the text is in bytes,
or a call to strlen(). Add a helper to
SkCanvas to simplify these examples.
Add another helper for SkString.
R=reed@google.com
Change-Id: I0204a31e938f065606f08ee7cd9a6b36db791ee2
Reviewed-on: https://skia-review.googlesource.com/13642
Commit-Queue: Cary Clark <caryclark@google.com>
Reviewed-by: Cary Clark <caryclark@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Cary Clark <caryclark@skia.org>
guarded by SK_SUPPORT_OBSOLETE_LOCKPIXELS
needs https://codereview.chromium.org/2820873002/# to land first
Bug: skia:6481
Change-Id: I1c39902cbf6fe99f622adfa8192733b95f7fea09
Change-Id: I1c39902cbf6fe99f622adfa8192733b95f7fea09
Reviewed-on: https://skia-review.googlesource.com/13580
Reviewed-by: Florin Malita <fmalita@chromium.org>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Fixes:
- create temp api for android to pass nullptr
- don't release and access sk_sp<SkData> at the same time in parameters
This reverts commit b14131c185.
Bug: skia:
Change-Id: Ic0e4f62520ba9f35455499ed30d306ad19d998a8
Reviewed-on: https://skia-review.googlesource.com/11129
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Matt Sarett <msarett@google.com>
This reverts commit 9920b10f52.
Reason for revert: trying to get details on w2k failure
https://chromium-swarm.appspot.com/task?id=354345d34ba3b310&refresh=10
Caught exception 3221225477 EXCEPTION_ACCESS_VIOLATION, was running:
unit test HugeBlurImageFilter
unit test FontNames
unit test Codec_PngRoundTrip
unit test ClampRange
unit test FontHost
unit test ColorMatrixFilter
f16 image scaled_codec_premul abnormal.wbmp
565 image brd_android_codec_divisor_0.167 interlaced3.png_0.167
unit test Codec_png
unit test ImageFilterBlurLargeImage
unit test FontObj
unit test DrawText
unit test GrShape
565 image brd_android_codec_divisor_0.333 interlaced2.png_0.333
unit test PathOpsOpCubicsThreaded
unit test PathOpsOpLoopsThreaded
unit test FontMgr
unit test ColorToHSVRoundTrip
unit test Image_Serialize_Encoding_Failure
Likely culprit:
unit test Image_Serialize_Encoding_Failure
step returned non-zero exit code: -1073741819
Original change's description:
> Revert[2] "clean up (partially) colortable api""
>
> This reverts commit 1d1165ca65.
>
> Bug: skia:
> Change-Id: Idbc0634ae3cec2e79f592d252de8751b077e6408
> Reviewed-on: https://skia-review.googlesource.com/11024
> Reviewed-by: Mike Reed <reed@google.com>
> Commit-Queue: Mike Reed <reed@google.com>
>
TBR=reed@google.com,reviews@skia.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Change-Id: Ia4e73434b083224baa36092c69526c2f59bb16aa
Reviewed-on: https://skia-review.googlesource.com/11025
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
This reverts commit 2e491a6a11.
Reason for revert: Windows unit tests failing?
Original change's description:
> clean up (partially) colortable api
>
> Needs this to land: https://codereview.chromium.org/2789853002/
>
> Bug: skia:
> Change-Id: I38d916a546b7fa64d000d973e695ddda24a589e7
> Reviewed-on: https://skia-review.googlesource.com/10600
> Commit-Queue: Mike Reed <reed@google.com>
> Reviewed-by: Matt Sarett <msarett@google.com>
>
TBR=msarett@google.com,scroggo@google.com,reed@google.com,reviews@skia.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Change-Id: I626e7edfcea82576a440dcaa851a04cedee6233f
Reviewed-on: https://skia-review.googlesource.com/10966
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
This reverts commit f3333c89bf.
Reason for revert: breaking the bots
Original change's description:
> skslc can now be compiled with no Skia dependencies, in preparation for its eventual
> role in Skia's build process.
>
> This reverts commit bcf35f86d5.
>
> BUG=skia:
>
> Change-Id: Id0a12dfc4d804d69a3c6bf60fed37e89ee130f02
> Reviewed-on: https://skia-review.googlesource.com/10802
> Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
> Reviewed-by: Ben Wagner <benjaminwagner@google.com>
>
TBR=benjaminwagner@google.com,ethannicholas@google.com,reviews@skia.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:
Change-Id: Ic7b50d391d25b3870acffa9764cbafc7f5c3be89
Reviewed-on: https://skia-review.googlesource.com/10962
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
role in Skia's build process.
This reverts commit bcf35f86d5.
BUG=skia:
Change-Id: Id0a12dfc4d804d69a3c6bf60fed37e89ee130f02
Reviewed-on: https://skia-review.googlesource.com/10802
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
This reverts commit 7833466da4.
Reason for revert: Vulkan assertion failure
Original change's description:
> skslc can now be compiled with no Skia dependencies, in preparation for
> its eventual role in Skia's build process.
>
> Bug: skia:
> Change-Id: Iaa9933f4fc4a64bec60aa897c509a3513f457a78
> Reviewed-on: https://skia-review.googlesource.com/10282
> Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
> Reviewed-by: Ben Wagner <benjaminwagner@google.com>
>
TBR=egdaniel@google.com,benjaminwagner@google.com,ethannicholas@google.com,reviews@skia.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Change-Id: Ic64cac2395abb406116885ddd725f74a434c8c49
Reviewed-on: https://skia-review.googlesource.com/10758
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
its eventual role in Skia's build process.
Bug: skia:
Change-Id: Iaa9933f4fc4a64bec60aa897c509a3513f457a78
Reviewed-on: https://skia-review.googlesource.com/10282
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
This will be rolled out in three stages:
1) make SkMemory.h and have SkTypes.h include it.
2) Adjust chromium and android.
3) no long include SkMemory.h in SkTypes.h
Change-Id: If360ef5e1164d88f50b03f279e2e963ca2f57d5d
Reviewed-on: https://skia-review.googlesource.com/9874
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Deferring removing the flags parameter from the virtuals until a
later CL (as it collides with another related CL)
BUG=skia:6366
Change-Id: I817fae3df03ecebe5ec3532f691ed06deab890e6
Reviewed-on: https://skia-review.googlesource.com/9739
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Move the fuzzer in
chromium/src/skia/tools/filter_fuzz_stub/filter_fuzz_stub.cc
to Skia's fuzzer.
I recommend removing filter_fuzz_stub from chromium and only
using Skia's fuzzer.
BUG=chromium:700836
Change-Id: Ibab1a9b696e54a3042ee61f5524d196c12df2888
Reviewed-on: https://skia-review.googlesource.com/9802
Commit-Queue: Herb Derby <herb@google.com>
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Possible next iterations:
- remove another allocation use the SkData trick to share
the object and its (trailing) data
- store a bit that tells use to free each pointer, allowing
the builder to "adopt" some allocations instead of copy.
Larger idea:
- merge with drawPoints to have a single object for both.
BUG=skia:6366
Change-Id: Iec33239aa2ad5d00b36469ca0b88934ddf6f22eb
Reviewed-on: https://skia-review.googlesource.com/9604
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Mike Reed <reed@google.com>
* Also fix SkRRect generation to only make valid RRs.a
* drawDRRect only draws if outer contains inner.
* Also fix SkComposeColorFilter::toString
Change-Id: Ia75da2813555b7714663929d0ec288ae2a86d9f1
Reviewed-on: https://skia-review.googlesource.com/9399
Commit-Queue: Hal Canary <halcanary@google.com>
Reviewed-by: Kevin Lubick <kjlubick@google.com>
For example: `fuzz --type _dump_canvas -b fuzz_file`
Note well: this command-line usage is subject to change.
Change-Id: Ida7368a699bafe2395604d8428a2d50cb0eff6aa
Reviewed-on: https://skia-review.googlesource.com/9025
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
run `fuzz --type pdf_canvas` or `fuzz --type null_canvas` or
`fuzz --type n32_canvas`
Change-Id: Id70179d5578ed1e67006aef7823bf75fc1d7a4a6
Reviewed-on: https://skia-review.googlesource.com/8418
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
android now updated.
This reverts commit e005edd3a5.
BUG=skia:6250
Change-Id: If08d344cdd863fde1d9955dc3fab671a83be0f73
Reviewed-on: https://skia-review.googlesource.com/8815
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Mike Reed <reed@google.com>
This also fixes bin/coverage.
fuzz/coverage borrows heavily from bin/coverage.
BUG=skia:
Change-Id: I9e353d1f5ea3bca1d57d66b1c1ecabc6f9b23cee
Reviewed-on: https://skia-review.googlesource.com/8414
Reviewed-by: Joe Gregorio <jcgregorio@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Similar to https://skia-review.googlesource.com/8270, treat intervals
as closed at both extremities in the 4f gradient fallback impl also.
BUG=skia:6212
Change-Id: I7f164868202ae6a0f76cbcdbcbf8e62db12a1bd4
Reviewed-on: https://skia-review.googlesource.com/8277
Commit-Queue: Florin Malita <fmalita@chromium.org>
Reviewed-by: Mike Reed <reed@google.com>
Useful for quickly importing the data into regression tests.
Change-Id: Icf4fa03f26dcc7f707dbdaf19be8cdc057aabb55
Reviewed-on: https://skia-review.googlesource.com/8255
Commit-Queue: Florin Malita <fmalita@chromium.org>
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Change-Id: Iec5fc759e331de24caea1347f9510917260d379b
Reviewed-on: https://skia-review.googlesource.com/7363
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
BUG=skia:
Change-Id: Ie7d4fac3024b361a281f456fec2b3a837e2bfe43
Reviewed-on: https://skia-review.googlesource.com/6881
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
BUG=skia:
Change-Id: Ic8a56448b39bf6a8c6388bffb7f3b7c5ed798a2f
Reviewed-on: https://skia-review.googlesource.com/6692
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
BUG=skia:5878
Change-Id: I13552948c86a83f2384b83f59432c11779f305f1
Reviewed-on: https://skia-review.googlesource.com/6528
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
This reverts commit ce33f10677.
Reason for revert: Breaking many gpu bots
Change-Id: I94c813ed6a9311458c872f74bb1b0792f46ff414
Reviewed-on: https://skia-review.googlesource.com/5737
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
This reverts commit 8e7432b7f9.
Reason for revert: <INSERT REASONING HERE>
external/skia/bench/../tools/android/SkAndroidSDKCanvas.h:103:36: error: C++ requires a type specifier for all declarations
void onClipRect(const SkRect&, ClipOp, ClipEdgeStyle) override;
Original change's description:
> remove SK_SUPPORT_LEGACY_CLIP_REGIONOPS
>
>
> switch over to SkClipOps now that SK_SUPPORT_LEGACY_CLIP_REGIONOPS is gone
>
> BUG=skia:
>
> Change-Id: Ifdc8b3746d508348a40cc009a4e529a1cb3c405d
> Reviewed-on: https://skia-review.googlesource.com/5714
> Commit-Queue: Mike Reed <reed@google.com>
> Reviewed-by: Mike Reed <reed@google.com>
>
TBR=reed@google.com,reviews@skia.org
BUG=skia:
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Change-Id: If26ea91d7464615e43c1d3d2f726e337ff56b55c
Reviewed-on: https://skia-review.googlesource.com/5721
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Mike Reed <reed@google.com>
switch over to SkClipOps now that SK_SUPPORT_LEGACY_CLIP_REGIONOPS is gone
BUG=skia:
Change-Id: Ifdc8b3746d508348a40cc009a4e529a1cb3c405d
Reviewed-on: https://skia-review.googlesource.com/5714
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Add a new mode to decode all frames of an animated image. Use
incremental decoding, rather than getPixels, since the primary client
uses incremental decoding.
Do not decode animated as index 8, which is only supported for the
first frame.
Change-Id: I5d7ed1a81c1ef37df3701c483486d4beff0f62a7
Reviewed-on: https://skia-review.googlesource.com/5679
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
Make the fuzzRange not crash if min == max, just set n to be min.
BUG=skia:
Change-Id: I138cefbec9b408d3b35e4258d770e6b396af0e5f
Reviewed-on: https://skia-review.googlesource.com/5305
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
(re-land 248ff02 & 2cb6cb7, with changes)
- Hide SkImageEncoder class in private header.
- SkImageEncoder::Type becomes SkEncodedImageFormat
- SkEncodedFormat becomes SkEncodedImageFormat
- SkImageEncoder static functions replaced with
single function EncodeImage()
- utility wrappers for EncodeImage() are in
sk_tool_utils.h
TODO: remove link-time registration mechanism.
TODO: clean up clients use of API and flip the flag.
TODO: implement EncodeImage() in chromeium/skia/ext
Change-Id: I47d451e50be4d5c6c130869c7fa7c2857243d9f0
Reviewed-on: https://skia-review.googlesource.com/4909
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Reviewed-on: https://skia-review.googlesource.com/5186
Commit-Queue: Hal Canary <halcanary@google.com>
Reviewed-by: Hal Canary <halcanary@google.com>
- Hide SkImageEncoder class in private header.
- SkImageEncoder::Type becomes SkEncodedImageFormat
- SkEncodedFormat becomes SkEncodedImageFormat
- SkImageEncoder static functions replaced with
single function EncodeImage()
- utility wrappers for EncodeImage() are in
sk_tool_utils.h
TODO: remove link-time registration mechanism.
TODO: clean up clients use of API and flip the flag.
TODO: implement EncodeImage() in chromeium/skia/ext
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=4909
Change-Id: Ib48b31fdc05cf23cda7f56ebfd67c841c149ce70
Reviewed-on: https://skia-review.googlesource.com/4909
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
This reverts commit 8af38a9647.
Reason for revert: Breaking compile bots, e.g. from https://uberchromegw.corp.google.com/i/client.skia.compile/builders/Build-Ubuntu-GCC-x86_64-Debug-NoGPU/builds/10029/steps/compile_skia%20on%20Ubuntu/logs/stdio :
In function `sk_make_sp<GrGLSLCaps, GrContextOptions>'
undefined reference to `GrGLSLCaps::GrGLSLCaps(GrContextOptions const&)
In function `_Z10sk_make_spI10GrGLSLCapsI16GrContextOptionsEE5sk_spIT_EDpOT0_':
undefined reference to `GrGLSLCaps::GrGLSLCaps(GrContextOptions const&)
Original change's description:
> skslc now uses standard Skia caps
>
> BUG=skia:
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=4660
>
> Change-Id: Idaedae3f81426b97f5052bb872cdf0610e47a84f
> Reviewed-on: https://skia-review.googlesource.com/4660
> Reviewed-by: Ben Wagner <benjaminwagner@google.com>
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
>
TBR=bsalomon@google.com,benjaminwagner@google.com,ethannicholas@google.com,reviews@skia.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Change-Id: Ic7f987f5c050ac2e333f5a0f16c8de85c1047a74
Reviewed-on: https://skia-review.googlesource.com/4697
Commit-Queue: Leon Scroggins <scroggo@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
We use this approach instead of T next() because different compilers
evaluate function parameters in different orders. If fuzz->next()
returned 5 and then 7, foo(fuzz->next(), fuzz->next()) would be
foo(5, 7) when compiled on GCC and foo(7, 5) when compiled on Clang.
By requiring params to be passed in, we avoid the temptation to call
next() in a way that does not consume fuzzed bytes in a single
platform-independent order.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=4392
Change-Id: I35de849f82e8be45378f662a48100eb732fa8895
Reviewed-on: https://skia-review.googlesource.com/4392
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Replace with std::unique_ptr.
Change-Id: I5806cfbb30515fcb20e5e66ce13fb5f3b8728176
Reviewed-on: https://skia-review.googlesource.com/4381
Commit-Queue: Ben Wagner <bungeman@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
signalBoring() no longer exists. When the fuzzer runs out of randomness,
it just returns 0. Fuzzers should not go into infinite loops if this
happens. do while loops are particularly error-prone.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=3963
Change-Id: Iebcfc14cc6b0a19c5dd015cd39875c81fa44003e
Reviewed-on: https://skia-review.googlesource.com/3963
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Add an interface to decode frames beyond the first in SkCodec, and
add an implementation for SkGifCodec.
Add getFrameData to SkCodec. This method reads ahead in the stream
to return a vector containing meta data about each frame in the image.
This is not required in order to decode frames beyond the first, but
it allows a client to learn extra information:
- how long the frame should be displayed
- whether a frame should be blended with a prior frame, allowing the
client to provide the prior frame to speed up decoding
Add a new fields to SkCodec::Options:
- fFrameIndex
- fHasPriorFrame
The API is designed so that SkCodec never caches frames. If a
client wants a frame beyond the first, they specify the frame in
Options.fFrameIndex. If the client does not have the
frame's required frame (the frame that this frame must be blended on
top of) cached, they pass false for
Options.fHasPriorFrame. Unless the frame is
independent, the codec will then recursively decode all frames
necessary to decode fFrameIndex. If the client has the required frame
cached, they can put it in the dst they pass to the codec, and the
codec will only draw fFrameIndex onto it.
Replace SkGifCodec's scanline decoding support with progressive
decoding, and update the tests accordingly.
Implement new APIs in SkGifCodec. Instead of using gif_lib, use
GIFImageReader, imported from Chromium (along with its copyright
headers) with the following changes:
- SkGifCodec is now the client
- Replace blink types
- Combine GIFColorMap::buildTable and ::getTable into a method that
creates and returns an SkColorTable
- Input comes from an SkStream, instead of a SegmentReader. Add
SkStreamBuffer, which buffers the (potentially partial) stream in
order to decode progressively.
(FIXME: This requires copying data that previously was read directly
from the SegmentReader. Does this hurt performance? If so, can we
fix it?)
- Remove UMA code
- Instead of reporting screen width and height to the client, allow the
client to query for it
- Fail earlier if the first frame AND screen have size of zero
- Compute required previous frame when adding a new one
- Move GIFParseQuery from GIFImageDecoder to GIFImageReader
- Allow parsing up to a specific frame (to skip parsing the rest of the
stream if a client only wants the first frame)
- Compute whether the first frame has alpha and supports index 8, to
create the SkImageInfo. This happens before reporting that the size
has been decoded.
Add GIFImageDecoder::haveDecodedRow to SkGifCodec, imported from
Chromium (along with its copyright header), with the following changes:
- Add support for sampling
- Use the swizzler
- Keep track of the rows decoded
- Do *not* keep track of whether we've seen alpha
Remove SkCodec::kOutOfOrder_SkScanlineOrder, which was only used by GIF
scanline decoding.
Call onRewind even if there is no stream (SkGifCodec needs to clear its
decoded state so it will decode from the beginning).
Add a method to SkSwizzler to access the offset into the dst, taking
subsetting into account.
Add a GM that animates a GIF.
Add tests for the new APIs.
*** Behavior changes:
* Previously, we reported that an image with a subset frame and no transparent
index was opaque and used the background index (if present) to fill the
background. This is necessary in order to support index 8, but it does not
match viewers/browsers I have seen. Examples:
- Chromium and Gimp render the background transparent
- Firefox, Safari, Linux Image Viewer, Safari Preview clip to the frame (for
a single frame image)
This CL matches Chromium's behavior and renders the background transparent.
This allows us to have consistent behavior across products and simplifies
the code (relative to what we would have to do to continue the old behavior
on Android). It also means that we will no longer support index 8 for some
GIFs.
* Stop checking for GIFSTAMP - all GIFs should be either 89a or 87a.
This matches Chromium. I suspect that bugs would have been reported if valid
GIFs started with "GIFVER" instead of "GIF89a" or "GIF87a" (but did not decode
in Chromium).
*** Future work not included in this CL:
* Move some checks out of haveDecodedRow, since they are the same for the
entire frame e.g.
- intersecting the frameRect with the full image size
- whether there is a color table
* Change when we write transparent pixels
- In some cases, Chromium deemed this unnecessary, but I suspect it is slower
than the fallback case. There will continue to be cases where we should
*not* write them, but for e.g. the first pass where we have already
cleared to transparent (which we may also be able to skip) writing the
transparent pixels will not make anything incorrect.
* Report color type and alpha type per frame
- Depending on alpha values, disposal methods, frame rects, etc, subsequent
frames may have different properties than the first.
* Skip copies of the encoded data
- We copy the encoded data in case the stream is one that cannot be rewound,
so we can parse and then decode (possibly not immediately). For some input
streams, this is unnecessary.
- I was concerned this cause a performance regression, but on average the
new code is faster than the old for the images I tested [1].
- It may cause a performance regression for Chromium, though, where we can
always move back in the stream, so this should be addressed.
Design doc:
https://docs.google.com/a/google.com/document/d/12Qhf9T92MWfdWujQwCIjhCO3sw6pTJB5pJBwDM1T7Kc/
[1] https://docs.google.com/a/google.com/spreadsheets/d/19V-t9BfbFw5eiwBTKA1qOBkZbchjlTC5EIz6HFy-6RI/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=2045293002
Review-Url: https://codereview.chromium.org/2045293002
Matches our naming convention for all other types - factories that
return sk_sp (or any type that intelligently manages its own
lifetime) are named Make.
Previous factories are still around, assuming
SK_SUPPORT_LEGACY_COLOR_SPACE_FACTORIES is defined. Enable that
define for Android, etc.
See also: https://codereview.chromium.org/2442053002/
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=3822
Change-Id: Iaea9376490736b494e8ffc820831f052bbe1478d
Reviewed-on: https://skia-review.googlesource.com/3822
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
- perform version check in CreateProc for XfermodeImageFilter and ArithmeticImageFilter
This reverts commit 3ed485f424.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2992
Change-Id: Ib4a154cdd5f5d1dcac921ef50d53b79a2d6a1be8
Reviewed-on: https://skia-review.googlesource.com/2992
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
This is a step towards using SkCodec in Chromium, where progressive
decoding is necessary.
Switch from using png_read_row (which expects all the data to be
available) to png_process_data, which uses callbacks when rows are
available.
Create a new API for SkCodec, which supports progressive decoding and
scanline decoding. Future changes will switch the other clients off of
startScanlineDecode and get/skip-Scanlines to the new API.
Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
updateCurrScanline(), which was only used by the old implementation for
interlaced PNG.
DMSrcSink:
- In CodecSrc::kScanline_Mode, use the new method for scanline decoding
for the supported formats (just PNG and PNG-in-ICO for now).
fuzz.cpp:
- Remove reference to kNone_ScanlineOrder
SkCodec:
- Add new APIs:
- startIncrementalDecode
- incrementalDecode
- Remove kNone_SkScanlineOrder and updateCurrScanline()
- Set fDstInfo and fOptions in getPixels(). This may not be necessary
for all implementations, but it simplifies things for SkPngCodec.
SkPngCodec:
- Implement new APIs
- Switch from sk_read_fn/png_read_row etc to png_process_data
- Expand AutoCleanPng's role to decode the header and create the
SkPngCodec
- Make the interlaced PNG decoder report how many lines were
initialized during an incomplete decode
SkIcoCodec:
- Implement the new APIs; supported for PNG in ICO
SkSampledCodec:
- Call the new method for decoding scanlines, and fall back to the old
method if the new version is unimplemented
- Remove references to kNone_SkScanlineOrder
tests/CodecPartial:
- Add a test which decodes part of an image, then finishes the decode,
and compares it to the straightforward method
tests/CodecTest:
- Add a test which decodes all scanlines using the new method
- Repurpose the Codec_stripes test to decode using the new method in
sections rather than all at once
- In the method check(), add a parameter for whether the image supports
the new method of scanline decoding, and be explicit about whether an
image supports incomplete
- Test incomplete PNG decodes. We should have been doing it anyway for
non-interlaced (except for an image that is too small - one row), but
the new method supports interlaced incomplete as well
- Make test_invalid_parameters test the new method
- Add a test to ensure that it's safe to fall back to scanline decoding without
rewinding
BUG=skia:4211
The new version was generally faster than the old version (but not significantly so).
Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
Review-Url: https://codereview.chromium.org/1997703003
With the move from SkData::NewXXX to SkData::MakeXXX most
SkAutoTUnref<SkData> were changed to sk_sp<SkData>. However,
there are still a few SkAutoTUnref<SkData> around, so clean
them up.
Review-Url: https://codereview.chromium.org/2212493002
Reason for revert:
Still causing problems in Google3, e.g.
https://test.corp.google.com/ui#cl=124138817&flags=CAMQBQ==&id=OCL:124138817:BASE:124139560:1465227435491:219ffbdb&t=//third_party/skia/HEAD:dm
Original issue's description:
> Make SkPngCodec decode progressively.
>
> This is a step towards using SkCodec in Chromium, where progressive
> decoding is necessary.
>
> Switch from using png_read_row (which expects all the data to be
> available) to png_process_data, which uses callbacks when rows are
> available.
>
> Create a new API for SkCodec, which supports progressive decoding and
> scanline decoding. Future changes will switch the other clients off of
> startScanlineDecode and get/skip-Scanlines to the new API.
>
> Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
> PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
> updateCurrScanline(), which was only used by the old implementation for
> interlaced PNG.
>
> DMSrcSink:
> - In CodecSrc::kScanline_Mode, use the new method for scanline decoding
> for the supported formats (just PNG and PNG-in-ICO for now).
>
> fuzz.cpp:
> - Remove reference to kNone_ScanlineOrder
>
> SkCodec:
> - Add new APIs:
> - startIncrementalDecode
> - incrementalDecode
> - Remove kNone_SkScanlineOrder and updateCurrScanline()
>
> SkPngCodec:
> - Implement new APIs
> - Switch from sk_read_fn/png_read_row etc to png_process_data
> - Expand AutoCleanPng's role to decode the header and create the
> SkPngCodec
> - Make the interlaced PNG decoder report how many lines were
> initialized during an incomplete decode
> - Make initializeSwizzler return a bool instead of an SkCodec::Result
> (It only returned kSuccess or kInvalidInput anyway)
>
> SkIcoCodec:
> - Implement the new APIs; supported for PNG in ICO
>
> SkSampledCodec:
> - Call the new method for decoding scanlines, and fall back to the old
> method if the new version is unimplemented
> - Remove references to kNone_SkScanlineOrder
>
> tests/CodecPartial:
> - Add a test which decodes part of an image, then finishes the decode,
> and compares it to the straightforward method
>
> tests/CodecTest:
> - Add a test which decodes all scanlines using the new method
> - Repurpose the Codec_stripes test to decode using the new method in
> sections rather than all at once
> - In the method check(), add a parameter for whether the image supports
> the new method of scanline decoding, and be explicit about whether an
> image supports incomplete
> - Test incomplete PNG decodes. We should have been doing it anyway for
> non-interlaced (except for an image that is too small - one row), but
> the new method supports interlaced incomplete as well
> - Make test_invalid_parameters test the new method
> - Add a test to ensure that it's safe to fall back to scanline decoding without
> rewinding
>
> BUG=skia:4211
>
> The new version was generally faster than the old version (but not significantly so).
>
> Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
>
> Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
>
> Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
>
> Committed: https://skia.googlesource.com/skia/+/30e78c9737ff4861dc4e3fa1e4cd010680ed6965
>
> Committed: https://skia.googlesource.com/skia/+/6fb2391b2cc83ee2160b4e994faa8128975acc1fTBR=reed@google.com,msarett@google.com,scroggo@chromium.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
BUG=skia:4211
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2044573002
Review-Url: https://codereview.chromium.org/2044573002
This is a step towards using SkCodec in Chromium, where progressive
decoding is necessary.
Switch from using png_read_row (which expects all the data to be
available) to png_process_data, which uses callbacks when rows are
available.
Create a new API for SkCodec, which supports progressive decoding and
scanline decoding. Future changes will switch the other clients off of
startScanlineDecode and get/skip-Scanlines to the new API.
Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
updateCurrScanline(), which was only used by the old implementation for
interlaced PNG.
DMSrcSink:
- In CodecSrc::kScanline_Mode, use the new method for scanline decoding
for the supported formats (just PNG and PNG-in-ICO for now).
fuzz.cpp:
- Remove reference to kNone_ScanlineOrder
SkCodec:
- Add new APIs:
- startIncrementalDecode
- incrementalDecode
- Remove kNone_SkScanlineOrder and updateCurrScanline()
SkPngCodec:
- Implement new APIs
- Switch from sk_read_fn/png_read_row etc to png_process_data
- Expand AutoCleanPng's role to decode the header and create the
SkPngCodec
- Make the interlaced PNG decoder report how many lines were
initialized during an incomplete decode
- Make initializeSwizzler return a bool instead of an SkCodec::Result
(It only returned kSuccess or kInvalidInput anyway)
SkIcoCodec:
- Implement the new APIs; supported for PNG in ICO
SkSampledCodec:
- Call the new method for decoding scanlines, and fall back to the old
method if the new version is unimplemented
- Remove references to kNone_SkScanlineOrder
tests/CodecPartial:
- Add a test which decodes part of an image, then finishes the decode,
and compares it to the straightforward method
tests/CodecTest:
- Add a test which decodes all scanlines using the new method
- Repurpose the Codec_stripes test to decode using the new method in
sections rather than all at once
- In the method check(), add a parameter for whether the image supports
the new method of scanline decoding, and be explicit about whether an
image supports incomplete
- Test incomplete PNG decodes. We should have been doing it anyway for
non-interlaced (except for an image that is too small - one row), but
the new method supports interlaced incomplete as well
- Make test_invalid_parameters test the new method
- Add a test to ensure that it's safe to fall back to scanline decoding without
rewinding
BUG=skia:4211
The new version was generally faster than the old version (but not significantly so).
Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
Committed: https://skia.googlesource.com/skia/+/30e78c9737ff4861dc4e3fa1e4cd010680ed6965
Review-Url: https://codereview.chromium.org/1997703003
Reason for revert:
Still breaking Google3 e.g.:
https://sponge.corp.google.com/target?id=9261d31b-34fc-4f0f-981e-f92f7c5cea2c&target=//third_party/skia/HEAD:dm#shard=1|run=1|attempt=1|page=-1
https://test.corp.google.com/ui#cl=123773095&flags=CAMQBQ==&id=OCL:123773095:BASE:123773415:1464804876959:b0ea9b1c&t=//third_party/skia/HEAD:dm
Original issue's description:
> Make SkPngCodec decode progressively.
>
> This is a step towards using SkCodec in Chromium, where progressive
> decoding is necessary.
>
> Switch from using png_read_row (which expects all the data to be
> available) to png_process_data, which uses callbacks when rows are
> available.
>
> Create a new API for SkCodec, which supports progressive decoding and
> scanline decoding. Future changes will switch the other clients off of
> startScanlineDecode and get/skip-Scanlines to the new API.
>
> Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
> PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
> updateCurrScanline(), which was only used by the old implementation for
> interlaced PNG.
>
> DMSrcSink:
> - In CodecSrc::kScanline_Mode, use the new method for scanline decoding
> for the supported formats (just PNG and PNG-in-ICO for now).
>
> fuzz.cpp:
> - Remove reference to kNone_ScanlineOrder
>
> SkCodec:
> - Add new APIs:
> - startIncrementalDecode
> - incrementalDecode
> - Remove kNone_SkScanlineOrder and updateCurrScanline()
>
> SkPngCodec:
> - Implement new APIs
> - Switch from sk_read_fn/png_read_row etc to png_process_data
> - Expand AutoCleanPng's role to decode the header and create the
> SkPngCodec
> - Make the interlaced PNG decoder report how many lines were
> initialized during an incomplete decode
> - Make initializeSwizzler return a bool instead of an SkCodec::Result
> (It only returned kSuccess or kInvalidInput anyway)
>
> SkIcoCodec:
> - Implement the new APIs; supported for PNG in ICO
>
> SkSampledCodec:
> - Call the new method for decoding scanlines, and fall back to the old
> method if the new version is unimplemented
> - Remove references to kNone_SkScanlineOrder
>
> tests/CodecPartial:
> - Add a test which decodes part of an image, then finishes the decode,
> and compares it to the straightforward method
>
> tests/CodecTest:
> - Add a test which decodes all scanlines using the new method
> - Repurpose the Codec_stripes test to decode using the new method in
> sections rather than all at once
> - In the method check(), add a parameter for whether the image supports
> the new method of scanline decoding, and be explicit about whether an
> image supports incomplete
> - Test incomplete PNG decodes. We should have been doing it anyway for
> non-interlaced (except for an image that is too small - one row), but
> the new method supports interlaced incomplete as well
> - Make test_invalid_parameters test the new method
> - Add a test to ensure that it's safe to fall back to scanline decoding without
> rewinding
>
> BUG=skia:4211
>
> The new version was generally faster than the old version (but not significantly so).
>
> Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
>
> Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
>
> Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
>
> Committed: https://skia.googlesource.com/skia/+/30e78c9737ff4861dc4e3fa1e4cd010680ed6965TBR=reed@google.com,msarett@google.com,scroggo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4211
Review-Url: https://codereview.chromium.org/2026383002
This is a step towards using SkCodec in Chromium, where progressive
decoding is necessary.
Switch from using png_read_row (which expects all the data to be
available) to png_process_data, which uses callbacks when rows are
available.
Create a new API for SkCodec, which supports progressive decoding and
scanline decoding. Future changes will switch the other clients off of
startScanlineDecode and get/skip-Scanlines to the new API.
Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
updateCurrScanline(), which was only used by the old implementation for
interlaced PNG.
DMSrcSink:
- In CodecSrc::kScanline_Mode, use the new method for scanline decoding
for the supported formats (just PNG and PNG-in-ICO for now).
fuzz.cpp:
- Remove reference to kNone_ScanlineOrder
SkCodec:
- Add new APIs:
- startIncrementalDecode
- incrementalDecode
- Remove kNone_SkScanlineOrder and updateCurrScanline()
SkPngCodec:
- Implement new APIs
- Switch from sk_read_fn/png_read_row etc to png_process_data
- Expand AutoCleanPng's role to decode the header and create the
SkPngCodec
- Make the interlaced PNG decoder report how many lines were
initialized during an incomplete decode
- Make initializeSwizzler return a bool instead of an SkCodec::Result
(It only returned kSuccess or kInvalidInput anyway)
SkIcoCodec:
- Implement the new APIs; supported for PNG in ICO
SkSampledCodec:
- Call the new method for decoding scanlines, and fall back to the old
method if the new version is unimplemented
- Remove references to kNone_SkScanlineOrder
tests/CodecPartial:
- Add a test which decodes part of an image, then finishes the decode,
and compares it to the straightforward method
tests/CodecTest:
- Add a test which decodes all scanlines using the new method
- Repurpose the Codec_stripes test to decode using the new method in
sections rather than all at once
- In the method check(), add a parameter for whether the image supports
the new method of scanline decoding, and be explicit about whether an
image supports incomplete
- Test incomplete PNG decodes. We should have been doing it anyway for
non-interlaced (except for an image that is too small - one row), but
the new method supports interlaced incomplete as well
- Make test_invalid_parameters test the new method
- Add a test to ensure that it's safe to fall back to scanline decoding without
rewinding
BUG=skia:4211
The new version was generally faster than the old version (but not significantly so).
Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
Review-Url: https://codereview.chromium.org/1997703003
Reason for revert:
This is failing tests and then crashing on Google3 [1]. The crashes are fixed by crrev.com/2026873002, but to fix the builder we'll need to upgrade its version of libpng.
[1] https://sponge.corp.google.com/target?id=e545ef55-4da4-4931-9524-1ac92acb61b1&target=//third_party/skia/HEAD:dm#shard=1|run=1|attempt=1|page=-1
Original issue's description:
> Make SkPngCodec decode progressively.
>
> This is a step towards using SkCodec in Chromium, where progressive
> decoding is necessary.
>
> Switch from using png_read_row (which expects all the data to be
> available) to png_process_data, which uses callbacks when rows are
> available.
>
> Create a new API for SkCodec, which supports progressive decoding and
> scanline decoding. Future changes will switch the other clients off of
> startScanlineDecode and get/skip-Scanlines to the new API.
>
> Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
> PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
> updateCurrScanline(), which was only used by the old implementation for
> interlaced PNG.
>
> DMSrcSink:
> - In CodecSrc::kScanline_Mode, use the new method for scanline decoding
> for the supported formats (just PNG and PNG-in-ICO for now).
>
> fuzz.cpp:
> - Remove reference to kNone_ScanlineOrder
>
> SkCodec:
> - Add new APIs:
> - startIncrementalDecode
> - incrementalDecode
> - Remove kNone_SkScanlineOrder and updateCurrScanline()
>
> SkPngCodec:
> - Implement new APIs
> - Switch from sk_read_fn/png_read_row etc to png_process_data
> - Expand AutoCleanPng's role to decode the header and create the
> SkPngCodec
> - Make the interlaced PNG decoder report how many lines were
> initialized during an incomplete decode
> - Make initializeSwizzler return a bool instead of an SkCodec::Result
> (It only returned kSuccess or kInvalidInput anyway)
>
> SkIcoCodec:
> - Implement the new APIs; supported for PNG in ICO
>
> SkSampledCodec:
> - Call the new method for decoding scanlines, and fall back to the old
> method if the new version is unimplemented
> - Remove references to kNone_SkScanlineOrder
>
> tests/CodecPartial:
> - Add a test which decodes part of an image, then finishes the decode,
> and compares it to the straightforward method
>
> tests/CodecTest:
> - Add a test which decodes all scanlines using the new method
> - Repurpose the Codec_stripes test to decode using the new method in
> sections rather than all at once
> - In the method check(), add a parameter for whether the image supports
> the new method of scanline decoding, and be explicit about whether an
> image supports incomplete
> - Test incomplete PNG decodes. We should have been doing it anyway for
> non-interlaced (except for an image that is too small - one row), but
> the new method supports interlaced incomplete as well
> - Make test_invalid_parameters test the new method
> - Add a test to ensure that it's safe to fall back to scanline decoding without
> rewinding
>
> BUG=skia:4211
>
> The new version was generally faster than the old version (but not significantly so).
>
> Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
>
> Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
>
> Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539eTBR=reed@google.com,msarett@google.com,scroggo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4211
Review-Url: https://codereview.chromium.org/2023103002
This is a step towards using SkCodec in Chromium, where progressive
decoding is necessary.
Switch from using png_read_row (which expects all the data to be
available) to png_process_data, which uses callbacks when rows are
available.
Create a new API for SkCodec, which supports progressive decoding and
scanline decoding. Future changes will switch the other clients off of
startScanlineDecode and get/skip-Scanlines to the new API.
Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
updateCurrScanline(), which was only used by the old implementation for
interlaced PNG.
DMSrcSink:
- In CodecSrc::kScanline_Mode, use the new method for scanline decoding
for the supported formats (just PNG and PNG-in-ICO for now).
fuzz.cpp:
- Remove reference to kNone_ScanlineOrder
SkCodec:
- Add new APIs:
- startIncrementalDecode
- incrementalDecode
- Remove kNone_SkScanlineOrder and updateCurrScanline()
SkPngCodec:
- Implement new APIs
- Switch from sk_read_fn/png_read_row etc to png_process_data
- Expand AutoCleanPng's role to decode the header and create the
SkPngCodec
- Make the interlaced PNG decoder report how many lines were
initialized during an incomplete decode
- Make initializeSwizzler return a bool instead of an SkCodec::Result
(It only returned kSuccess or kInvalidInput anyway)
SkIcoCodec:
- Implement the new APIs; supported for PNG in ICO
SkSampledCodec:
- Call the new method for decoding scanlines, and fall back to the old
method if the new version is unimplemented
- Remove references to kNone_SkScanlineOrder
tests/CodecPartial:
- Add a test which decodes part of an image, then finishes the decode,
and compares it to the straightforward method
tests/CodecTest:
- Add a test which decodes all scanlines using the new method
- Repurpose the Codec_stripes test to decode using the new method in
sections rather than all at once
- In the method check(), add a parameter for whether the image supports
the new method of scanline decoding, and be explicit about whether an
image supports incomplete
- Test incomplete PNG decodes. We should have been doing it anyway for
non-interlaced (except for an image that is too small - one row), but
the new method supports interlaced incomplete as well
- Make test_invalid_parameters test the new method
- Add a test to ensure that it's safe to fall back to scanline decoding without
rewinding
BUG=skia:4211
The new version was generally faster than the old version (but not significantly so).
Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
Review-Url: https://codereview.chromium.org/1997703003
Instead of a single ASSERT macro, this switches to two new methods:
- signalBug(): tell afl-fuzz there's a bug caused by its inputs (by crashing)
- signalBoring(): tell afl-fuzz these inputs are not worth testing (by exiting gracefully)
I'm not seeing any effect on fuzz/s when I just always log verbosely.
signalBug() now triggers SIGSEGV rather than SIGABRT. This should make it work with catchsegv more easily.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1585353002
Review URL: https://codereview.chromium.org/1585353002
Try to start faster:
- remove flags dependency
- print nothing
- strip unused symbols from the binary on Mac (smaller binary)
- only create one fuzz object
- only run one DEF_FUZZ
I am not sure if any of these things mattered, but I thought you may like to look.
Good stuff:
- make nextU() / nextF() work
- drop nextURange() / nextFRange() for now
- add nextB() for a single byte
As you may have guessed, I have figured out how to use afl-fuzz on my laptop.
Syntax to run becomes:
$ afl-fuzz ... out/Release/fuzz <DEF_FUZZ name> @@
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1581203003
Review URL: https://codereview.chromium.org/1581203003
