Reason for revert:
Still breaking Google3 e.g.:
https://sponge.corp.google.com/target?id=9261d31b-34fc-4f0f-981e-f92f7c5cea2c&target=//third_party/skia/HEAD:dm#shard=1|run=1|attempt=1|page=-1
https://test.corp.google.com/ui#cl=123773095&flags=CAMQBQ==&id=OCL:123773095:BASE:123773415:1464804876959:b0ea9b1c&t=//third_party/skia/HEAD:dm
Original issue's description:
> Make SkPngCodec decode progressively.
>
> This is a step towards using SkCodec in Chromium, where progressive
> decoding is necessary.
>
> Switch from using png_read_row (which expects all the data to be
> available) to png_process_data, which uses callbacks when rows are
> available.
>
> Create a new API for SkCodec, which supports progressive decoding and
> scanline decoding. Future changes will switch the other clients off of
> startScanlineDecode and get/skip-Scanlines to the new API.
>
> Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
> PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
> updateCurrScanline(), which was only used by the old implementation for
> interlaced PNG.
>
> DMSrcSink:
> - In CodecSrc::kScanline_Mode, use the new method for scanline decoding
> for the supported formats (just PNG and PNG-in-ICO for now).
>
> fuzz.cpp:
> - Remove reference to kNone_ScanlineOrder
>
> SkCodec:
> - Add new APIs:
> - startIncrementalDecode
> - incrementalDecode
> - Remove kNone_SkScanlineOrder and updateCurrScanline()
>
> SkPngCodec:
> - Implement new APIs
> - Switch from sk_read_fn/png_read_row etc to png_process_data
> - Expand AutoCleanPng's role to decode the header and create the
> SkPngCodec
> - Make the interlaced PNG decoder report how many lines were
> initialized during an incomplete decode
> - Make initializeSwizzler return a bool instead of an SkCodec::Result
> (It only returned kSuccess or kInvalidInput anyway)
>
> SkIcoCodec:
> - Implement the new APIs; supported for PNG in ICO
>
> SkSampledCodec:
> - Call the new method for decoding scanlines, and fall back to the old
> method if the new version is unimplemented
> - Remove references to kNone_SkScanlineOrder
>
> tests/CodecPartial:
> - Add a test which decodes part of an image, then finishes the decode,
> and compares it to the straightforward method
>
> tests/CodecTest:
> - Add a test which decodes all scanlines using the new method
> - Repurpose the Codec_stripes test to decode using the new method in
> sections rather than all at once
> - In the method check(), add a parameter for whether the image supports
> the new method of scanline decoding, and be explicit about whether an
> image supports incomplete
> - Test incomplete PNG decodes. We should have been doing it anyway for
> non-interlaced (except for an image that is too small - one row), but
> the new method supports interlaced incomplete as well
> - Make test_invalid_parameters test the new method
> - Add a test to ensure that it's safe to fall back to scanline decoding without
> rewinding
>
> BUG=skia:4211
>
> The new version was generally faster than the old version (but not significantly so).
>
> Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
>
> Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
>
> Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
>
> Committed: https://skia.googlesource.com/skia/+/30e78c9737ff4861dc4e3fa1e4cd010680ed6965TBR=reed@google.com,msarett@google.com,scroggo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4211
Review-Url: https://codereview.chromium.org/2026383002
This is a step towards using SkCodec in Chromium, where progressive
decoding is necessary.
Switch from using png_read_row (which expects all the data to be
available) to png_process_data, which uses callbacks when rows are
available.
Create a new API for SkCodec, which supports progressive decoding and
scanline decoding. Future changes will switch the other clients off of
startScanlineDecode and get/skip-Scanlines to the new API.
Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
updateCurrScanline(), which was only used by the old implementation for
interlaced PNG.
DMSrcSink:
- In CodecSrc::kScanline_Mode, use the new method for scanline decoding
for the supported formats (just PNG and PNG-in-ICO for now).
fuzz.cpp:
- Remove reference to kNone_ScanlineOrder
SkCodec:
- Add new APIs:
- startIncrementalDecode
- incrementalDecode
- Remove kNone_SkScanlineOrder and updateCurrScanline()
SkPngCodec:
- Implement new APIs
- Switch from sk_read_fn/png_read_row etc to png_process_data
- Expand AutoCleanPng's role to decode the header and create the
SkPngCodec
- Make the interlaced PNG decoder report how many lines were
initialized during an incomplete decode
- Make initializeSwizzler return a bool instead of an SkCodec::Result
(It only returned kSuccess or kInvalidInput anyway)
SkIcoCodec:
- Implement the new APIs; supported for PNG in ICO
SkSampledCodec:
- Call the new method for decoding scanlines, and fall back to the old
method if the new version is unimplemented
- Remove references to kNone_SkScanlineOrder
tests/CodecPartial:
- Add a test which decodes part of an image, then finishes the decode,
and compares it to the straightforward method
tests/CodecTest:
- Add a test which decodes all scanlines using the new method
- Repurpose the Codec_stripes test to decode using the new method in
sections rather than all at once
- In the method check(), add a parameter for whether the image supports
the new method of scanline decoding, and be explicit about whether an
image supports incomplete
- Test incomplete PNG decodes. We should have been doing it anyway for
non-interlaced (except for an image that is too small - one row), but
the new method supports interlaced incomplete as well
- Make test_invalid_parameters test the new method
- Add a test to ensure that it's safe to fall back to scanline decoding without
rewinding
BUG=skia:4211
The new version was generally faster than the old version (but not significantly so).
Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
Review-Url: https://codereview.chromium.org/1997703003
Reason for revert:
This is failing tests and then crashing on Google3 [1]. The crashes are fixed by crrev.com/2026873002, but to fix the builder we'll need to upgrade its version of libpng.
[1] https://sponge.corp.google.com/target?id=e545ef55-4da4-4931-9524-1ac92acb61b1&target=//third_party/skia/HEAD:dm#shard=1|run=1|attempt=1|page=-1
Original issue's description:
> Make SkPngCodec decode progressively.
>
> This is a step towards using SkCodec in Chromium, where progressive
> decoding is necessary.
>
> Switch from using png_read_row (which expects all the data to be
> available) to png_process_data, which uses callbacks when rows are
> available.
>
> Create a new API for SkCodec, which supports progressive decoding and
> scanline decoding. Future changes will switch the other clients off of
> startScanlineDecode and get/skip-Scanlines to the new API.
>
> Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
> PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
> updateCurrScanline(), which was only used by the old implementation for
> interlaced PNG.
>
> DMSrcSink:
> - In CodecSrc::kScanline_Mode, use the new method for scanline decoding
> for the supported formats (just PNG and PNG-in-ICO for now).
>
> fuzz.cpp:
> - Remove reference to kNone_ScanlineOrder
>
> SkCodec:
> - Add new APIs:
> - startIncrementalDecode
> - incrementalDecode
> - Remove kNone_SkScanlineOrder and updateCurrScanline()
>
> SkPngCodec:
> - Implement new APIs
> - Switch from sk_read_fn/png_read_row etc to png_process_data
> - Expand AutoCleanPng's role to decode the header and create the
> SkPngCodec
> - Make the interlaced PNG decoder report how many lines were
> initialized during an incomplete decode
> - Make initializeSwizzler return a bool instead of an SkCodec::Result
> (It only returned kSuccess or kInvalidInput anyway)
>
> SkIcoCodec:
> - Implement the new APIs; supported for PNG in ICO
>
> SkSampledCodec:
> - Call the new method for decoding scanlines, and fall back to the old
> method if the new version is unimplemented
> - Remove references to kNone_SkScanlineOrder
>
> tests/CodecPartial:
> - Add a test which decodes part of an image, then finishes the decode,
> and compares it to the straightforward method
>
> tests/CodecTest:
> - Add a test which decodes all scanlines using the new method
> - Repurpose the Codec_stripes test to decode using the new method in
> sections rather than all at once
> - In the method check(), add a parameter for whether the image supports
> the new method of scanline decoding, and be explicit about whether an
> image supports incomplete
> - Test incomplete PNG decodes. We should have been doing it anyway for
> non-interlaced (except for an image that is too small - one row), but
> the new method supports interlaced incomplete as well
> - Make test_invalid_parameters test the new method
> - Add a test to ensure that it's safe to fall back to scanline decoding without
> rewinding
>
> BUG=skia:4211
>
> The new version was generally faster than the old version (but not significantly so).
>
> Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
>
> Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
>
> Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539eTBR=reed@google.com,msarett@google.com,scroggo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4211
Review-Url: https://codereview.chromium.org/2023103002
This is a step towards using SkCodec in Chromium, where progressive
decoding is necessary.
Switch from using png_read_row (which expects all the data to be
available) to png_process_data, which uses callbacks when rows are
available.
Create a new API for SkCodec, which supports progressive decoding and
scanline decoding. Future changes will switch the other clients off of
startScanlineDecode and get/skip-Scanlines to the new API.
Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
updateCurrScanline(), which was only used by the old implementation for
interlaced PNG.
DMSrcSink:
- In CodecSrc::kScanline_Mode, use the new method for scanline decoding
for the supported formats (just PNG and PNG-in-ICO for now).
fuzz.cpp:
- Remove reference to kNone_ScanlineOrder
SkCodec:
- Add new APIs:
- startIncrementalDecode
- incrementalDecode
- Remove kNone_SkScanlineOrder and updateCurrScanline()
SkPngCodec:
- Implement new APIs
- Switch from sk_read_fn/png_read_row etc to png_process_data
- Expand AutoCleanPng's role to decode the header and create the
SkPngCodec
- Make the interlaced PNG decoder report how many lines were
initialized during an incomplete decode
- Make initializeSwizzler return a bool instead of an SkCodec::Result
(It only returned kSuccess or kInvalidInput anyway)
SkIcoCodec:
- Implement the new APIs; supported for PNG in ICO
SkSampledCodec:
- Call the new method for decoding scanlines, and fall back to the old
method if the new version is unimplemented
- Remove references to kNone_SkScanlineOrder
tests/CodecPartial:
- Add a test which decodes part of an image, then finishes the decode,
and compares it to the straightforward method
tests/CodecTest:
- Add a test which decodes all scanlines using the new method
- Repurpose the Codec_stripes test to decode using the new method in
sections rather than all at once
- In the method check(), add a parameter for whether the image supports
the new method of scanline decoding, and be explicit about whether an
image supports incomplete
- Test incomplete PNG decodes. We should have been doing it anyway for
non-interlaced (except for an image that is too small - one row), but
the new method supports interlaced incomplete as well
- Make test_invalid_parameters test the new method
- Add a test to ensure that it's safe to fall back to scanline decoding without
rewinding
BUG=skia:4211
The new version was generally faster than the old version (but not significantly so).
Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
Review-Url: https://codereview.chromium.org/1997703003
This will allow me to test and visualize some assumptions
on parsing and applying color profiles. Also, it should
help me find and fix bugs.
This is certainly not an optimized implementation, and, as
far as I know, it doesn't take any shortcuts to improve
performance. We'll probably want to do both of these
once we know where it fits in the pipeline.
Right now this test is only run on an arbitrary set of ~100
images from the top 10k skps. I'll continue to add more
"interesting" images and probably tweak the code as
necessary.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1995233003
Review-Url: https://codereview.chromium.org/1995233003
When decoding to 565 or Gray, allow the client to incorrectly ask for premul.
When checking whether it's possible to decode to 565, return whether the
source is opaque.
In DM, allow decoding to 565 or Gray, even if the client also asked for premul.
This fixes a bug introduced in crrev.com/1999593003 when we stopped ever
requesting Opaque, resulting in us not testing 565 or Gray.
BUG=skia:4616
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=1996993003
Review-Url: https://codereview.chromium.org/1996993003
Only JPEG and WEBP support native scaling, so only create a CodecSrc
with a scale for those types.
If I run
dm --src image --images resources
this cuts down the number of Srcs from 11063 to 8032. All of these
trimmed Srcs would have failed quickly for each Sink (3 Sinks with the
above flags), but this will avoid creating them.
It drops the runtime on my mac from 13.2s to 11.4s, for about a 14%
speedup.
BUG=skia:5307
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1999103002
Review-Url: https://codereview.chromium.org/1999103002
With the GPU backend, allow F16 render targets to be created (along with
any other renderable format). We were previously just falling back to 8888.
In SampleApp, if the window configuration is F16, don't render directly
to the primary surface (which is actually sRGB 8888). Intead, make an
off-screen F16 surface, then blit it back to the framebuffer when we're done.
In DM, clamp values outside of [0,1]. These were wrapping, producing very
incorrect images. (Many filters can trigger out-of-range values due to
ringing).
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1890923003
Review URL: https://codereview.chromium.org/1890923003
I was using SkRect::MakeLargest() as bounds, which is sort of nutso,
as that clearly is way out of bounds for how big a picture can feasibly
be, i.e. something closer to SkIRect::MakeLargest().
This was causing spurious quick rejects in drawPatch(). I didn't really
look much deeper to figure out why. It's easy enough to just feed it the
proper bounds of the entire content.
This means patch_primitive draws correctly in sp-8888 mode.
I also noticed the GM was too small... it clipped off most of its content.
So I've made it larger.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1865143002
Review URL: https://codereview.chromium.org/1865143002
Also added SkSurfaceProps to SkSpecialImage, so that Image -> Surface conversion can preserve the desired behavior during filtering.
Many small changes, including a bunch of comments about places where we may be losing information right now. My approach was to ensure that if anything fails, it will always fall back to "legacy" mode - gamma-correctness is opt-in, so I'll just have to feed things through as missing cases are exposed.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1838953007
Review URL: https://codereview.chromium.org/1845283003
