fDirtyBits is only used by SkPaint::FlatteningTraits, which in turn was
only used as a smaller, faster format to flatten paints in-memory to dedup
them in the old picture backend.
SkRecord obsoleted all this. Neither flatten()/unflatten() (disk format)
nor FlatteningTraits is used anywhere performance or size matters.
Here I revert the deduping code back to using the disk format for flattened paints.
We stil do have to flatten and unflatten paints while coverting from SkRecord
backend to the old backend, so we can't just delete this all yet, but any
faithful round trip flatten()/unflatten() pair will be fine, however slow.
NOTRY=true
BUG=skia:
R=reed@google.com, mtklein@google.com
Author: mtklein@chromium.org
Review URL: https://codereview.chromium.org/604813003
Before this CL, SkRecord only adjusted the bounds of draw ops for SaveLayers' paints.
That worked fine, but as a final step we intersect the bounds of draw ops with the
bounds of the current clip, essentially undoing all that work.
I think the right fix here is to also adjust the bounds of the clip ops.
BUG=skia:2957, 415468
R=robertphillips@google.com
Review URL: https://codereview.chromium.org/595953002
Refactored text blob backend for improved performance: instead of using
separate buffers for runs/positions/glyphs, everything is now packed in
a consolidated slab (including the SkTextBlob object itself!).
Benefits:
* number of allocations per blob construction reduced from ~4 to 1
(also minimizes internal fragmentation)
* run record size reduced by 8 bytes
This takes the blob construction overhead down to negligible levels
(for the current Blink uncached textblob implementation).
Unfortunately, the code is much more finicky (run merging in
particular) -- hence the assert spree.
Multi-run blobs are vulnerable to realloc storms but this is not a
problem at the moment because Blink is using one-run blobs 99% of the
time. Will be addressed in the future.
R=mtklein@google.com, reed@google.com, robertphillips@google.com
Committed: https://skia.googlesource.com/skia/+/13645ea0ea87038ebd71be3bd6d53b313069a9e4
Author: fmalita@chromium.org
Review URL: https://codereview.chromium.org/581173003
Reason for revert:
Broke the new blobshader gm.
Original issue's description:
> Souped-up SkTextBlob.
>
> Refactored text blob backend for improved performance: instead of using
> separate buffers for runs/positions/glyphs, everything is now packed in
> a consolidated slab (including the SkTextBlob object itself!).
>
> Benefits:
>
> * number of allocations per blob construction reduced from ~4 to 1
> (also minimizes internal fragmentation)
> * run record size reduced by 8 bytes
>
> This takes the blob construction overhead down to negligible levels
> (for the current Blink uncached textblob implementation).
>
> Unfortunately, the code is much more finicky (run merging in
> particular) -- hence the assert spree.
>
> Multi-run blobs are vulnerable to realloc storms but this is not a
> problem at the moment because Blink is using one-run blobs 99% of the
> time. Will be addressed in the future.
>
>
> R=reed@google.com,mtklein@google.com,robertphillips@google.com
>
> Committed: https://skia.googlesource.com/skia/+/13645ea0ea87038ebd71be3bd6d53b313069a9e4R=mtklein@google.com, reed@google.com, robertphillips@google.comTBR=mtklein@google.com, reed@google.com, robertphillips@google.com
NOTREECHECKS=true
NOTRY=true
Author: fmalita@chromium.org
Review URL: https://codereview.chromium.org/588853002
Refactored text blob backend for improved performance: instead of using
separate buffers for runs/positions/glyphs, everything is now packed in
a consolidated slab (including the SkTextBlob object itself!).
Benefits:
* number of allocations per blob construction reduced from ~4 to 1
(also minimizes internal fragmentation)
* run record size reduced by 8 bytes
This takes the blob construction overhead down to negligible levels
(for the current Blink uncached textblob implementation).
Unfortunately, the code is much more finicky (run merging in
particular) -- hence the assert spree.
Multi-run blobs are vulnerable to realloc storms but this is not a
problem at the moment because Blink is using one-run blobs 99% of the
time. Will be addressed in the future.
R=mtklein@google.com, reed@google.com, robertphillips@google.com
Author: fmalita@chromium.org
Review URL: https://codereview.chromium.org/581173003
This is intended to disconnect the lifetimes of the optimization data, cached layers and replacement objects.
Note that the optimization data already makes a copy of the paint in the SkPicture. Additionally the replacement object will probably go away at some point.
R=bsalomon@google.com
Author: robertphillips@google.com
Review URL: https://codereview.chromium.org/579843002
This is a bit like a limited SkData, geared to store really tiny byte strings.
This is not hooked up anywhere beyond the new unit test. I did experimentally
plumb it into SkRecord for drawPosTextH: just over 40% of drawPosTextH calls in
our repo can fit into ShortData.
BUG=skia:
R=reed@google.com, mtklein@google.com
Author: mtklein@chromium.org
Review URL: https://codereview.chromium.org/573323002
blink skips all pending commands during picture recording if it is drawing an opaque full-frame
geometry or image. This may improve performance for some edge cases. To recognize an opaque
full-frame drawing should be cheap enough. Otherwise, the overhead will offset the improvement.
Unfortunately, data from perf for content_shell on Nexus7 shows that SkDeferredCanvas::isFullFrame
is far from cheap. Table below shows that how much isFullFrame() costs in the whole render process.
benchmark percentage
my local benchmark(draw 1000 sprites) 4.1%
speedReading 2.8%
FishIETank(1000 fishes) 1.5%
GUIMark3 Bitmap 2.0%
By contrast, real recording (SkGPipeCanvas::drawBitmapRectToRect) and real rasterization
(GrDrawTarget::drawRect) cost ~4% and ~6% in the whole render process respectively. Apparently,
SkDeferredCanvas::isFullFrame() is nontrivial.
getDeviceSize() is the main contributor to this hotspot. The change simply save the canvasSize and
reuse it among drawings if it is not a fresh frame. This change cut off ~65% (or improved ~2 times)
of isFullFrame().
telemetry smoothness canvas_tough_test didn't show obvious improvement or regression.
BUG=411166
Committed: https://skia.googlesource.com/skia/+/8e45c3777d886ba3fe239bb549d06b0693692152R=junov@chromium.org, tomhudson@google.com, reed@google.com
Author: yunchao.he@intel.com
Review URL: https://codereview.chromium.org/545813002
Reason for revert:
This is leaking memory:
http://108.170.220.120:10117/builders/Test-Ubuntu13.10-GCE-NoGPU-x86_64-Debug-ASAN/builds/2516/steps/RunDM/logs/stdio
Original issue's description:
> Picture Recording: fix the performance bottleneck in SkDeferredCanvas::isFullFrame
>
> blink skips all pending commands during picture recording if it is drawing an opaque full-frame
> geometry or image. This may improve performance for some edge cases. To recognize an opaque
> full-frame drawing should be cheap enough. Otherwise, the overhead will offset the improvement.
> Unfortunately, data from perf for content_shell on Nexus7 shows that SkDeferredCanvas::isFullFrame
> is far from cheap. Table below shows that how much isFullFrame() costs in the whole render process.
>
> benchmark percentage
> my local benchmark(draw 1000 sprites) 4.1%
> speedReading 2.8%
> FishIETank(1000 fishes) 1.5%
> GUIMark3 Bitmap 2.0%
>
> By contrast, real recording (SkGPipeCanvas::drawBitmapRectToRect) and real rasterization
> (GrDrawTarget::drawRect) cost ~4% and ~6% in the whole render process respectively. Apparently,
> SkDeferredCanvas::isFullFrame() is nontrivial.
>
> getDeviceSize() is the main contributor to this hotspot. The change simply save the canvasSize and
> reuse it among drawings if it is not a fresh frame. This change cut off ~65% (or improved ~2 times)
> of isFullFrame().
>
> telemetry smoothness canvas_tough_test didn't show obvious improvement or regression.
>
> BUG=411166
>
> Committed: https://skia.googlesource.com/skia/+/8e45c3777d886ba3fe239bb549d06b0693692152R=junov@chromium.org, tomhudson@google.com, reed@google.com, yunchao.he@intel.comTBR=junov@chromium.org, reed@google.com, tomhudson@google.com, yunchao.he@intel.com
NOTREECHECKS=true
NOTRY=true
BUG=411166
Author: mtklein@google.com
Review URL: https://codereview.chromium.org/571053002
blink skips all pending commands during picture recording if it is drawing an opaque full-frame
geometry or image. This may improve performance for some edge cases. To recognize an opaque
full-frame drawing should be cheap enough. Otherwise, the overhead will offset the improvement.
Unfortunately, data from perf for content_shell on Nexus7 shows that SkDeferredCanvas::isFullFrame
is far from cheap. Table below shows that how much isFullFrame() costs in the whole render process.
benchmark percentage
my local benchmark(draw 1000 sprites) 4.1%
speedReading 2.8%
FishIETank(1000 fishes) 1.5%
GUIMark3 Bitmap 2.0%
By contrast, real recording (SkGPipeCanvas::drawBitmapRectToRect) and real rasterization
(GrDrawTarget::drawRect) cost ~4% and ~6% in the whole render process respectively. Apparently,
SkDeferredCanvas::isFullFrame() is nontrivial.
getDeviceSize() is the main contributor to this hotspot. The change simply save the canvasSize and
reuse it among drawings if it is not a fresh frame. This change cut off ~65% (or improved ~2 times)
of isFullFrame().
telemetry smoothness canvas_tough_test didn't show obvious improvement or regression.
BUG=411166
R=junov@chromium.org, tomhudson@google.com, reed@google.com
Author: yunchao.he@intel.com
Review URL: https://codereview.chromium.org/545813002
