the caller instantiates a light (distant, point or spot), and an
SkDiffuseLightingFilter or SkSpecularLightingImageFilter with that light. A
Sobel edge detection filter is applied to the alpha of the incoming bitmap, and
the result is used as a height map for lighting calculations.
Review URL: http://codereview.appspot.com/6302101/
git-svn-id: http://skia.googlecode.com/svn/trunk@4314 2bbb7eff-a529-9590-31e7-b0007b416f81
called (for now at least) TwoPointConical, to distinguish it from the
existing one (TwoPointRadial), and to reflect its odd behavior where it draws
transparent outside the boundary of the "cone" between the two circles.
This impl is unsupported by GPU and Printing at the moment, and Chrome does not
yet invoke it.
Review URL: https://codereview.appspot.com/6299051
git-svn-id: http://skia.googlecode.com/svn/trunk@4197 2bbb7eff-a529-9590-31e7-b0007b416f81
or stroke parameters for a path.
Today, the patheffect only sees if the caller was going to stroke or fill, and
if stroke, it just sees the width. With this change, the effect can see all of the
related parameters (e.g. cap/join/miter). No other change is intended at this
time.
After this change, I hope to use this additional data to allow SkDashPathEffect
to, at times, apply the stroke as part of its effect, which may be much more
efficient than first dashing, and then reading that and stroking it.
Most of these files changed just because of the new parameter to filterPath. The
key changes are in SkPathEffect.[h,cpp], SkPaint.cpp and SkScalerContext.cpp
Review URL: https://codereview.appspot.com/6250051
git-svn-id: http://skia.googlecode.com/svn/trunk@4048 2bbb7eff-a529-9590-31e7-b0007b416f81
or stroke parameters for a path.
Today, the patheffect only sees if the caller was going to stroke or fill, and if
stroke, it just sees the width. With this change, the effect can see all of the
related parameters (e.g. cap/join/miter). No other change is intended at this
time.
After this change, I hope to use this additional data to allow SkDashPathEffect
to, at times, apply the stroke as part of its effect, which may be much more
efficient than first dashing, and then reading that and stroking it.
Most of these files changed just because of the new parameter to filterPath. The
key changes are in SkPathEffect.[h,cpp], SkPaint.cpp and SkScalerContext.cpp
Review URL: https://codereview.appspot.com/6249050
git-svn-id: http://skia.googlecode.com/svn/trunk@4046 2bbb7eff-a529-9590-31e7-b0007b416f81
The following changes were made by this CL:
1. Make flatten() a protected method as callers should use
SkFlattenableWriteBuffer to flatten an object
2. Make flatten a const method (including subclasses)
3. Mark subclass implementation of flatten with SK_OVERRIDE
4. Ensure overridden flatten impls call their parent
5. Remove no-op implementations of flatten from subclasses
Additionally, if necessary the unflattening constructor was
also moved to the protected section of the subclasses
header if it was not already there.
git-svn-id: http://skia.googlecode.com/svn/trunk@3540 2bbb7eff-a529-9590-31e7-b0007b416f81
of SkImageFilter. If that returns false, then the filter itself is invoked.
git-svn-id: http://skia.googlecode.com/svn/trunk@2977 2bbb7eff-a529-9590-31e7-b0007b416f81
M include/effects/SkAvoidXfermode.h
M include/effects/SkDiscretePathEffect.h
M include/effects/Sk1DPathEffect.h
M include/effects/Sk2DPathEffect.h
M include/effects/SkBlurDrawLooper.h
M include/effects/SkPixelXorXfermode.h
M include/effects/SkDashPathEffect.h
M include/effects/SkColorMatrixFilter.h
M include/effects/SkEmbossMaskFilter.h
M include/effects/SkLayerDrawLooper.h
M include/effects/SkGroupShape.h
M include/effects/SkBlurImageFilter.h
M include/effects/SkRectShape.h
A include/effects/SkEffects.h
M include/effects/SkCornerPathEffect.h
M include/effects/SkGradientShader.h
M include/effects/SkBlurMaskFilter.h
M include/effects/SkLayerRasterizer.h
M include/core/SkMallocPixelRef.h
M include/core/SkFlattenable.h
M include/core/SkShape.h
M include/core/SkPixelRef.h
M include/core/SkGraphics.h
M include/core/SkPathEffect.h
M include/core/SkPostConfig.h
M include/core/SkXfermode.h
M include/core/SkColorFilter.h
M include/images/SkFlipPixelRef.h
M include/images/SkImageRef_GlobalPool.h
M src/effects/SkDashPathEffect.cpp
M src/effects/SkColorMatrixFilter.cpp
M src/effects/SkBlurImageFilter.cpp
M src/effects/SkGroupShape.cpp
M src/effects/SkCornerPathEffect.cpp
M src/effects/SkGradientShader.cpp
M src/effects/SkBlurMaskFilter.cpp
M src/effects/SkAvoidXfermode.cpp
M src/effects/Sk2DPathEffect.cpp
M src/effects/SkBlurDrawLooper.cpp
M src/effects/SkPixelXorXfermode.cpp
M src/effects/SkColorFilters.cpp
M src/effects/SkLayerDrawLooper.cpp
M src/effects/SkRectShape.cpp
A src/effects/SkEffects.cpp
M src/effects/SkLayerRasterizer.cpp
M src/effects/SkDiscretePathEffect.cpp
M src/effects/Sk1DPathEffect.cpp
A src/effects/SkEffects_none.cpp
M src/core/SkPixelRef.cpp
M src/core/SkGraphics.cpp
M src/core/SkFlattenable.cpp
M src/core/SkBitmapProcShader.h
M src/core/SkPathEffect.cpp
M src/core/SkShape.cpp
M src/core/SkXfermode.cpp
M src/core/SkMallocPixelRef.cpp
M src/core/SkBitmapProcShader.cpp
M src/images/SkFlipPixelRef.cpp
M src/images/SkImageRef_GlobalPool.cpp
A src/ports/SkGlobalInitialization_chromium.cpp
M src/ports/SkImageRef_ashmem.h
M src/ports/SkImageRef_ashmem.cpp
A src/ports/SkGlobalInitialization_default.cpp
M gyp/effects.gyp
M gyp/tools.gyp
M gyp/ports.gyp
git-svn-id: http://skia.googlecode.com/svn/trunk@2876 2bbb7eff-a529-9590-31e7-b0007b416f81
The imageblur test also needed to stop calling getDeviceSize(), since it was
returning 99999x99999 for the SkPicture case.
git-svn-id: http://skia.googlecode.com/svn/trunk@2699 2bbb7eff-a529-9590-31e7-b0007b416f81
SkBlurImageFilter, sets it on an SkPaint, passes that paint to saveLayer(),
draws the primitives which are to be blurred, then calls restore(), which
applies the blur. The blurs have separate sizes in the horizontal and vertical
direction. This feature is GPU-only for now.
NB: Due to the clipping change, there are slight pixel differences on the
blurs_gpu and shadows_gpu tests, so those will require rebaselining on all
platforms, as will some of the WebKit layout tests (TBD).
Review URL: http://codereview.appspot.com/5322068/
git-svn-id: http://skia.googlecode.com/svn/trunk@2643 2bbb7eff-a529-9590-31e7-b0007b416f81
I have manually examined all of these diffs and restored a few files that
seem to require manual adjustment.
The following files still need to be modified manually, in a separate CL:
android_sample/SampleApp/AndroidManifest.xml
android_sample/SampleApp/res/layout/layout.xml
android_sample/SampleApp/res/menu/sample.xml
android_sample/SampleApp/res/values/strings.xml
android_sample/SampleApp/src/com/skia/sampleapp/SampleApp.java
android_sample/SampleApp/src/com/skia/sampleapp/SampleView.java
experimental/CiCarbonSampleMain.c
experimental/CocoaDebugger/main.m
experimental/FileReaderApp/main.m
experimental/SimpleCocoaApp/main.m
experimental/iOSSampleApp/Shared/SkAlertPrompt.h
experimental/iOSSampleApp/Shared/SkAlertPrompt.m
experimental/iOSSampleApp/SkiOSSampleApp-Base.xcconfig
experimental/iOSSampleApp/SkiOSSampleApp-Debug.xcconfig
experimental/iOSSampleApp/SkiOSSampleApp-Release.xcconfig
gpu/src/android/GrGLDefaultInterface_android.cpp
gyp/common.gypi
gyp_skia
include/ports/SkHarfBuzzFont.h
include/views/SkOSWindow_wxwidgets.h
make.bat
make.py
src/opts/memset.arm.S
src/opts/memset16_neon.S
src/opts/memset32_neon.S
src/opts/opts_check_arm.cpp
src/ports/SkDebug_brew.cpp
src/ports/SkMemory_brew.cpp
src/ports/SkOSFile_brew.cpp
src/ports/SkXMLParser_empty.cpp
src/utils/ios/SkImageDecoder_iOS.mm
src/utils/ios/SkOSFile_iOS.mm
src/utils/ios/SkStream_NSData.mm
tests/FillPathTest.cpp
Review URL: http://codereview.appspot.com/4816058
git-svn-id: http://skia.googlecode.com/svn/trunk@1982 2bbb7eff-a529-9590-31e7-b0007b416f81
SkGPipe needs this, since it cannot (unlike SkPicture) see all of the factories
before it hands its data to the reader.
In this mode, the writer embedds the factory name the first time it sees it,
and then after that writes an index (referencing the fFactorySet). The reader
installs an empty array, and as it encounters names, appends them to that array
so that subsequent indices can be used to retrieve the previously named factory.
Some of the existing patheffects did not register their factory names, so those
changes are also part of this CL. Annoyingly, to register your factory using the
current scheme, it has to be in the public section of the class definition.
git-svn-id: http://skia.googlecode.com/svn/trunk@1663 2bbb7eff-a529-9590-31e7-b0007b416f81
promise that const SkPaint& stay const (so we don't have bugs if a const paint
is referenced from two threads in pictures)
git-svn-id: http://skia.googlecode.com/svn/trunk@1074 2bbb7eff-a529-9590-31e7-b0007b416f81
Fixed rendering of shadows under bitmaps.
Added an option to SkBlurMask to produce higher quality blurs.
The HQ blur option is propagated through SkBlurDrawLooper so that it can be invoked by WebKit for drawing shadows.
Added a shadow rendering test to gm.
Bugs fixed: 146, 150
Related Chromium bugs: 11153, 42654
Code review: http://codereview.appspot.com/4174049
git-svn-id: http://skia.googlecode.com/svn/trunk@818 2bbb7eff-a529-9590-31e7-b0007b416f81
