This makes the register recycling checks a bit more
precise. At head we never recycle a register that's
holding a hoisted value, which is overly conservative.
We really should never recycle a register that's still
needed. By extending the lifetime of any hoisted value
that's used in the loop, we prevent that, while still
allowing hoisted values that are only used in hoisted
computation to be reused.
This takes just a small tweak in the JIT code (removing
the !hoisted({x,y,z}) checks), and a somewhat larger
refactoring in the interpreter, making both hoisted and
non-hoisted code go through the same recycling register
assignment flow.
There's one diff in the existing cases where we now
reuse a hoisted register, and I've added a second test
just to make sure it's covered explicitly.
Change-Id: I25b37ab1f1fea3042d7fd167529abc8fed1dddff
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/233239
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Due to limitations in BodyMovin/AE JSX, full effect data is not
available (specifically the "channel range" property).
We only support static master hue, static master saturation and
static master lightness at this point.
This CL also introduces a new animation builder pattern:
DiscardableAdapterBase and attachDiscardableAdapter().
The former is a base class for adapters with full animator ownership.
This enables a) capturing raw adapter pointers in animator lambdas and
b) syncing to SG only once, after all local animators are updated).
The latter is a helper for managing adapter creation and optional
destruction (when all adapter properties are static we can discard it).
Change-Id: Iecc4b78830e5464e7958cb12cdfd75a61010aa25
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/231956
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Florin Malita <fmalita@chromium.org>
Add missing comparison and selection ops, bit casts, 16-bit memory
operations, gathers, uniform loads, and fill in math holes where
reasonable. Update some names to be a bit more regular.
I think all instructions are implemented in the interpreter,
and many tested. More testing and JITs to follow.
Change-Id: I8cf377e8b72a86ac950e020892ce82b39e9d7277
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/229893
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Change-Id: If57fb79db8f8c5fd185fefaa202167c8082dd846
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/229921
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Change-Id: Ic81b3433b485ca9ce0e60bd10ec12706e673ee89
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/229917
Commit-Queue: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Auto-Submit: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
This removes all of the fixed-function particle affector classes.
Instead, each particle effect just has two SkSL snippets, one for
spawn logic, and one for update logic. Each one gets an inout copy
of the particle struct. Ultimately, this makes the effects much
simpler and smaller, while also being far more flexible (you can
do whatever you want with any values you want). Finally, because
the interpreter is vectorized and a particular effect's scripts
are usually tuned to the specific behaviors desired, it's faster
on basically every effect I compared.
I re-created all of the old effects in the new system. Many just
use pure SkSL (no curves or anything). Some of the old curve and
path/text stuff was very handy, though - so those are now exposed
as external values in the interpreter. Basically, an effect can
have any number of named "bindings" that are a callable thing.
This can be a path, text (shortcut for making fancy paths), curve,
or color curve. The path ones return a float4 with position and
normal, the curves return one or four floats.
... and this transposes all of the particle data storage into
SoA form, so that it can use the much faster interpreter entry
point.
Change-Id: Iebe711c45994c4201041b12d171af976bc5e758e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/222057
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Even if a JIT ultimately doesn't end up hoisting any values, it's going
to want this information while it decides. Writing it in one place also
ensures we only get it wrong in one place...
I'm no_ extending the lifetime of hoisted instructions here in Builder.
That's something to leave to the backend so they have the flexibility of
which of these values to hoist, if any. If they don't hoist, they'll
need to know when the value dies.
Moving this information back here lets the test expectation goldens
reflect the hoist bit again too. Kind of nice.
Change-Id: Ib165ca898a97c1d822cb28fe24f15bae4d570a17
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/229024
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
I'm slowly refactoring my way to where hoisting and register assignment
are done in backend-specific ways, but this liveness analysis is always
going to be useful for each backend.
Use deaths() to restore friendly ☠️ dead code markers in test dumps.
Change-Id: I3ab94665bbbbf0788b0b27e00d644eba927dff47
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/228113
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Unlike all other Skottie effects, motion blur requires sampling at multiple
points on the timeline.
To support this:
1) Introduce MotionBlurEffect - a custom SG render node which can drive
the timeline of its subtree using an sksg::Animator.
2) Introduce MotionBlurController to swap for a regular LayerController
when needed. MotionBlurController dispatches time ticks to
MotionBlurEffect instead of directly to the layer animators.
The actual motion blur impl is based on
https://skia-review.googlesource.com/c/skia/+/221416.
Motion blur requires Lottie files exported with this BodyMovin patch:
https://github.com/bodymovin/bodymovin-extension/pull/15
Change-Id: I075e101ea91ec9aa300bac35ee810fd539f1aced
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/225416
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Florin Malita <fmalita@chromium.org>
Noticed we were only dumping the final register
programs for the integer code. Might as well also
track the value programs.
Change-Id: I417c5c655b632691557bbbb136dcbd3f3167af9a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/225324
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Herb Derby <herb@google.com>
We used to rely solely on visual bounds for vertical alignment. That
had the downside of leading/trailing empty lines being ignored.
Then https://skia-review.googlesource.com/c/skia/+/220916 switched to
using typographical bounds. This approach produces results in line
with AE, but allows some glyphs to overflow the alignment boundary.
This CL introduces a hybrid approach:
1) for standard AE text alignment, continue to use typographical bounds
2) for Skottie VAlign extensions (sk_vj), use the union of typographical
and visual bounds - this should mitigate both issues mentioned above
Change-Id: Ifd3ccae3d721728ce67942206160ebe92056d3a2
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/224188
Reviewed-by: Ben Wagner <bungeman@google.com>
Reviewed-by: Avinash Parchuri <aparchur@google.com>
I was just reading the ARM docs and realized that their BIC ("BIt
Clear") is the same as SSE's ANDN ("AND Not") instruction. It's kind of
a neat little tool to have laying around... comes up more than you'd
think, and it's sometimes the clearest way to express what you're doing,
as in the changed program here where the comment is "mask away the low
bits". That's a bit_clear with a mask for what you want to clear away!
And the real reason to write this up is that I want to have a CL to
point to that shows how to add an instruction top to bottom.
Change-Id: I99690ed9c1009427b3986955e7ae6264de4d215c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/223120
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Instruction is the fundamental data, and Analysis derived from it.
The fields in Analysis are only* needed in Builder::done(), and this
split seems to help clarify what done() can tweak (Analysis) and what
it cannot (fProgram, Instructions). done() is now const.
No speed change as far as I can tell.
* As you may notice looking at the test expectations, making analysis
ephemeral means that dump() can no longer print the skull for dead code
or the arrow for hoisted. The register program that's also in the
expectation file still reflects both of these optimizations, so we're
not really losing any information. Just maybe less demo-friendly.
Change-Id: I79feb57558525591baf3faadeb59c418c12793f3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/223119
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Herb Derby <herb@google.com>
This cuts the overhead bench from about 19µs to about 15µs.
The key insight here is that the only registers that might become
available after any given instruction are the ones that hold that
instruction's inputs. We can check when they become available
directly from the original Builder::Program, without needing a
side death schedule data structure.
Marking hoisted instructions as having life == program size
helps make this logic a little simpler to reason through.
Change-Id: Ifb9957f2d0e323e0e5d07996a2cc988f7c8b4c3f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/223117
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Implement radial wipe with a sweep gradient shader mask filter.
The implementation is slightly convoluted because edge feathering requires a real blur, which in turn requires content layer isolation.
So there are two distinct operation modes:
- no feather -> draw the content directly into the dest buffer, with the mask filter
deferred in SG context
- feather -> draw the content into a separate layer, then blend (dstOut) the composed
blur+shader mask on top
Change-Id: I253701aff42db8010ce463762252c262e2c5d92b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/222596
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Florin Malita <fmalita@chromium.org>
- 32x8 i32 add,sub,mul
- add I32_Naive bench/test builder to get better i32 mul coverage
- minor refactoring all over
Change-Id: I13cc19ff37a2da0bcff289ba51baac08f456d6c5
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/222485
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
The motion tile phase is a one-dimensional shift, applied to every other
row or column (based on a selector property).
Implement using a masking shader (covering the static rows/cols),
and blend mode shader composition (srcIn for static/pass-through
rows/cols, and srcOut for phased rows/cols).
TBR=
Change-Id: I336c150e5d4900962dc2de801a4e1572cf4b5d59
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/221339
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Florin Malita <fmalita@chromium.org>
I'm staring at this assembly,
vmovups (%rsi), %ymm3
vpsrld $24, %ymm3, %ymm4
vpslld $16, %ymm4, %ymm15
vorps %ymm4, %ymm15, %ymm4
vpsubw %ymm4, %ymm0, %ymm4
Just knowing that could be
vmovups (%rsi), %ymm3
vpshufb 0x??(%rip), %ymm3, %ymm4
vpsubw %ymm4, %ymm0, %ymm4
That is, instead of shifting, shifting, and bit-oring
to create the 0a0a scale factor from ymm3, we could just
byte shuffle directly using some pre-baked control pattern
(stored at the end of the program like other constants)
pshufb lets you arbitrarily remix bytes from its argument and
zero bytes, and NEON has a similar family of vtbl instructions,
even including that same feature of injecting zeroes.
I think I've got this working, and the speedup is great,
from 0.19 to 0.16 ns/px for I32_SWAR, and
from 0.43 to 0.38 ns/px for I32.
Change-Id: Iab850275e826b4187f0efc9495a4b9eab4402c38
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/220871
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Yet another way to transform a layer, disguised as a distort effect.
TBR=
Change-Id: Ic2d5479fa6ae27b460de60875924f73f77fc7f71
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/221001
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Florin Malita <fmalita@chromium.org>
Now that we've got shr_16x2, extract(..., 8, splat(0x00ff00ff)) is
better done as shr_16x2(..., 8). This swaps a 16-bit shift in for
the 32-bit shift, a wash, but lets us drop the bit_and at the end,
saving one whole instruction.
This places I32_SWAR a tiny little bit faster than the code in Opts,
like .19 ns/px vs .20 ns/px for Opts.
Change-Id: I4160dc03ecc8b855c0773a927f1510ad5cbb4b87
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/220856
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Herb Derby <herb@google.com>
This is the final bunny I've got in my hat, I think...
Remembering that none of the s += d*invA adds can overflow,
we can use a single 32-bit add to add them all at once.
This means we don't have to unpack the src pixel into rb/ga
halves. We need only extract the alpha for invA.
This brings I32_SWAR even with the Opts code!
curr/maxrss loops min median mean max stddev samples config bench
36/36 MB 133 0.206ns 0.211ns 0.208ns 0.211ns 1% ▁▇▁█▁▇▁▇▁▇ nonrendering SkVM_4096_I32_SWAR
37/37 MB 152 0.432ns 0.432ns 0.434ns 0.444ns 1% ▃▁▁▁▁▃▁▁█▁ nonrendering SkVM_4096_I32
37/37 MB 50 0.781ns 0.794ns 0.815ns 0.895ns 5% ▆▂█▃▅▂▂▁▂▁ nonrendering SkVM_4096_F32
37/37 MB 76 0.773ns 0.78ns 0.804ns 0.907ns 6% ▄█▅▁▁▁▁▂▁▁ nonrendering SkVM_4096_RP
37/37 MB 268 0.201ns 0.203ns 0.203ns 0.204ns 0% █▇▆▆▆▆▁▆▆▆ nonrendering SkVM_4096_Opts
Change-Id: Ibf0a9c5d90b35f1e9cf7265868bd18b7e0a76c43
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/220805
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
I figure the easiest way to expose 16-bit operations
is to expose 16x2 pair operations... this means we
can continue to always work with the same size vector.
Switching from 32-bit multiplies to 16-bit multiplies
is going to deliver the most oomph... they cost roughly
half what 32-bit multiplies do on x86.
Speed now:
I32_SWAR: 0.27 ns/px
I32: 0.43 ns/px
F32: 0.76 ns/px
RP: 0.8 ns/px
Opts: 0.2 ns/px
Change-Id: I8350c71722a9bde714ba18f97b8687fe35cc749f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/220709
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Herb Derby <herb@google.com>
I just kind of remembered that if we're doing (xy+x)/256
and x is a destination channel and y is 255-sa, then you
can get the +x for free by multiplying by 256-sa instead.
(d * (255-sa) + d)
(d * (255-sa + 1))
(d * (256-sa) )
Duh. This is a trick we play in a lot of legacy code and
I've just now realized it's exactly equivalent to the trick
I want to play here... sigh.
Folding this math in kind of makes mul/mad_unorm8 moot.
Speed's getting good:
I32_SWAR: 0.3 ns/px
I32 : 0.55 ns/px
F32 : 0.8 ns/px
RP : 0.8 ns/px
Opts : 0.2 ns/px
Change-Id: I4d10db51ea80a3258c36e97b6b334ad253804613
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/220708
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
The mask-only special case for extract is wrong...
it never looked it its input!
This not only makes things correct-er, but oddly it also
makes them faster by breaking inter-loop data dependencies.
Disable tests for _I32... they're actually still broken
because of a much more systemic flaw in how I've evaluated
programs. The _F32 and _I32_SWAR JIT code and all interpreted
code is just getting lucky. o_O
While here, update the I32_SWAR code to use the same math as I32,
(x*y+x)/256 for unorm8 mul. This just helps keep me sane.
Change-Id: I1acc09adb84c426fca4b2be5ca8c2d46d9678dd8
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/220577
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Add logic to adjust glyph positions based on animated tracking properties.
This adjustment is applied post-shaping (it doesn't observe the text box),
and requires line re-alignment - thus it is being processed per-line.
Change-Id: Id44a295032a48c7216f126cb02dd2d2d5cc18ae3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/220076
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Florin Malita <fmalita@chromium.org>
Range selector's "Based On" property controls how range indices map
to glyphs: characters, characters-excluding-spaces, words, lines.
To support this feature:
- update SkottieShaper to track domain-relevant info per fragment
(fLineIndex, fIsWhitespace)
- update TextAdapter to build domain maps
(domain index -> fragment span)
- update RangeSelector to run its range indices through a domain map,
if present.
Change-Id: I80e713f6beaa2578aa0eae1d1ddae8e1e47d8d10
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/219859
Commit-Queue: Florin Malita <fmalita@chromium.org>
Reviewed-by: Ben Wagner <bungeman@google.com>
I used to have a dump of the value program before it was
translated to registers, but it went away a while ago.
This restores it.
Change-Id: I9b8bfcb124843cad4b0dc44bdf0a03e95a0c83d8
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/219757
Commit-Queue: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Convert extract(x,bits,z) to be (x >> bits) & z,
now a more explicit parallel to pack().
This lets us eliminate the funky bit counting required from the old
instruction, but more saliently it makes it more likely that the masks
we AND with will be the same value.
Ultimately down at the x86 or ARM ISA level, the AND instructions don't
really benefit from having an immediate argument (while the shifts do).
We might as well treat the mask as a normal value, letting it get
commoned with identical values, loop hoisted, etc.
Change-Id: I48a38468b46f2c730574c025f412262296472447
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/219597
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
The current implementation applies constant coverage (outside selector
range) based on computed integral edges.
But the integral range is clamped to the valid index domain and its
extremes are always assumed to have partial coverage - so we never get
to constant-blit the full buffer when the interval is outside, which
can yield incorrect coverage for the first/last fragments.
Update the constant coverage logic to operate in full domain coordinates.
Change-Id: I23902674fe5e822081fb8262167511df1cc3463e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/219206
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Florin Malita <fmalita@chromium.org>
Introduce square/ramp/triangle/round/smooth shape generators,
and use them to seed the range selector coverage pipeline.
Change-Id: Ib7b94ceecd2ccf66820f4dd2443fdd62e2ac6a1b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/218828
Commit-Queue: Florin Malita <fmalita@chromium.org>
Reviewed-by: Ben Wagner <bungeman@google.com>
At some point adding more and more complex instructions reduces
to the absurdity of SolveTheWholeProblem-The-Instruction, but
I think this one will come up often enough to still make sense.
mad() makes sense for unorm8 just about everywhere mad() makes
sense for f32.
This instruction won't matter to a JIT, but helps the interpreter.
Change-Id: Iace92296cffbb6fbc3acd1f853cb01c51792f796
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/218716
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
I'm of two minds about this... it adds register pressure and really only
tends to hoist few instructions that are fairly cheap anway. On the
other hand, it's neat, it's easy to turn off (just set the initial
hoist value to false in Builder::push()) and it does deliver a
noticeable though slight performance improvement in the interpreter.
I think the final decision will probably come down to what we think
about maintainability?
Change-Id: Idd6346f70f03188917918406731154246a7c6fcb
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/218584
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
This reverts commit 346f82c1c3.
Reason for revert: *SAN bots
Original change's description:
> print 1/K floats as fractions
>
> Change-Id: Id00cbd0950e77debb5ab5d45541dc0f8d13a3c42
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/218338
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: Mike Klein <mtklein@google.com>
TBR=mtklein@google.com,brianosman@google.com
Change-Id: Ic35cec97d2dc2c1e19dbdf8ea7b505ad75072da1
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/218529
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Change-Id: Id00cbd0950e77debb5ab5d45541dc0f8d13a3c42
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/218338
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Each animator can have multiple range selectors, whose combined "coverage"
modulates how the animator props compose with other/initial props.
Since there can be multiple animators with different/arbitrary selectors,
we compute independent property values for each fragment.
Supported features:
- start, end, offset, amount
- units: percentage, index
- based-on: characters-only for now
- mode: add-only for now
- shape: square-only for now
Change-Id: If7fee46ffb29e1f92542822481ed699fd0b0b521
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/218076
Commit-Queue: Florin Malita <fmalita@chromium.org>
Reviewed-by: Ben Wagner <bungeman@google.com>
Change-Id: Ib0d4f354787e413749fdda8b59ccc2f94472b0ce
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/218243
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Kind of the flip side of pack.
Made slightly awkward by instructions having only one immediate...
calling _BitScanForward / __builtin_ctz() at runtime seems to work
fine, but it really could have been done at compile time.
Change-Id: Ic83fe8e0a1603fb9189598dcc26c842cc797bf45
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/218241
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This instruction can lower to some useful SSE/NEON
instructions, and even if not, is a handy way to
express the frequent paring of << and |.
I32_SWAR: 2.3 -> 1.9
I32: 2.6 -> 2.4
F32: 5.1 -> 4.7
Change-Id: Ia169ad40f0aaef32417e05d9bf91c2d2542e7b5f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/218238
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Another way for an interpreter to go faster
is to provide better instructions.
mul_unorm8 is one we use all the time.
Drops _I32 bench from ~3.6ns/px to ~2.6ns/px.
Change-Id: I9d08914c114048b79075796af9ec802236b35706
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/218236
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Eliminate the duplicate functionality,
and better testing for the bench builders.
Change-Id: If20e52107738903f854aec431416e573d7a7d640
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/218041
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
This is mostly to test how easy rebaselining SkVMTest is.
Change-Id: I27ab6f6bb8b7e126327374009783afd86d416f55
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/218039
Reviewed-by: Brian Osman <brianosman@google.com>
- keep expectations in resources/
- overwrite automatically if needed
so we can see the diff in Git
Change-Id: I2486b127ebcc7f40332fd0462e38b1af04d3e32b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/218038
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
The interesting bit here is a change in glyph positioning:
AE text animator transforms are to be applied relative to the glyph position.
To support this behavior, update Shaper to externalize glyph positioning
when in fragmented mode. I.e. instead of baking glyph positions in blobs,
apply them at the scene graph transform level (such that they compose with
animated transforms correctly).
Change-Id: I9aeb5e6f8c1ec1a2c8b5351e8fc2a73d4bdf5cad
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/217556
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Florin Malita <fmalita@chromium.org>
