v8/src/codegen.h

347 lines
8.9 KiB
C
Raw Normal View History

// Copyright 2006-2008 the V8 project authors. All rights reserved.
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following
// disclaimer in the documentation and/or other materials provided
// with the distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#ifndef V8_CODEGEN_H_
#define V8_CODEGEN_H_
#include "ast.h"
#include "code-stubs.h"
#include "runtime.h"
// Include the declaration of the architecture defined class CodeGenerator.
// The contract to the shared code is that the the CodeGenerator is a subclass
// of Visitor and that the following methods are available publicly:
// MakeCode
// SetFunctionInfo
// masm
// frame
// has_valid_frame
// SetFrame
// DeleteFrame
// allocator
// AddDeferred
// in_spilled_code
// set_in_spilled_code
//
// These methods are either used privately by the shared code or implemented as
// shared code:
// CodeGenerator
// ~CodeGenerator
// ProcessDeferred
// GenCode
// BuildBoilerplate
// ComputeCallInitialize
// ComputeCallInitializeInLoop
// ProcessDeclarations
// DeclareGlobals
// FindInlineRuntimeLUT
// CheckForInlineRuntimeCall
// PatchInlineRuntimeEntry
// GenerateFastCaseSwitchStatement
// GenerateFastCaseSwitchCases
// TryGenerateFastCaseSwitchStatement
// GenerateFastCaseSwitchJumpTable
// FastCaseSwitchMinCaseCount
// FastCaseSwitchMaxOverheadFactor
// CodeForFunctionPosition
// CodeForReturnPosition
// CodeForStatementPosition
// CodeForSourcePosition
// Mode to overwrite BinaryExpression values.
enum OverwriteMode { NO_OVERWRITE, OVERWRITE_LEFT, OVERWRITE_RIGHT };
#if V8_TARGET_ARCH_IA32
#include "ia32/codegen-ia32.h"
#elif V8_TARGET_ARCH_X64
#include "x64/codegen-x64.h"
#elif V8_TARGET_ARCH_ARM
#include "arm/codegen-arm.h"
#endif
#include "register-allocator.h"
namespace v8 {
namespace internal {
// Code generation can be nested. Code generation scopes form a stack
// of active code generators.
class CodeGeneratorScope BASE_EMBEDDED {
public:
explicit CodeGeneratorScope(CodeGenerator* cgen) {
previous_ = top_;
top_ = cgen;
}
~CodeGeneratorScope() {
top_ = previous_;
}
static CodeGenerator* Current() {
ASSERT(top_ != NULL);
return top_;
}
private:
static CodeGenerator* top_;
CodeGenerator* previous_;
};
// Deferred code objects are small pieces of code that are compiled
// out of line. They are used to defer the compilation of uncommon
// paths thereby avoiding expensive jumps around uncommon code parts.
class DeferredCode: public ZoneObject {
public:
DeferredCode();
virtual ~DeferredCode() { }
virtual void Generate() = 0;
MacroAssembler* masm() { return masm_; }
Defer the writing of the source position data to the relocation information until a possible debug break location is reached. Currently this is call sites with calls to code objects and JS return. Source position information in the code therefore no longer refers to the "first" instruction generated for a given source position (which was not the case defered code anyway) but to the first break location after that source position was passed (again defered code always start with source position information). This doesn't make a difference for the debugger as it will always be stopped only at debug break locations. However, this makes the life of the peep-hole optimizer much easier as many oportunities for posh/pop eliminations where previosly blocked by relocation information already written to the code object. Two types of source positions are still collected. Statement positions indicate the position of the start of the statement leading to this code and (plain) positions indicate other places typically call sites to help indicate current position in backtraces. The two different types of positions are also used to distinguish between step next and step in. Runs all the tests (including debugger tests) as before. Moved the checking for the FLAG_debug_info to one place. I will do the same changes to the ARM codegenerator in a seperate changelist. Review URL: http://codereview.chromium.org/2957 git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@335 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
2008-09-18 08:51:43 +00:00
int statement_position() const { return statement_position_; }
int position() const { return position_; }
Label* entry_label() { return &entry_label_; }
Label* exit_label() { return &exit_label_; }
#ifdef DEBUG
void set_comment(const char* comment) { comment_ = comment; }
const char* comment() const { return comment_; }
#else
void set_comment(const char* comment) { }
const char* comment() const { return ""; }
#endif
inline void Jump();
inline void Branch(Condition cc);
void BindExit() { masm_->bind(&exit_label_); }
void SaveRegisters();
void RestoreRegisters();
protected:
MacroAssembler* masm_;
private:
// Constants indicating special actions. They should not be multiples
// of kPointerSize so they will not collide with valid offsets from
// the frame pointer.
static const int kIgnore = -1;
static const int kPush = 1;
// This flag is ored with a valid offset from the frame pointer, so
// it should fit in the low zero bits of a valid offset.
static const int kSyncedFlag = 2;
Defer the writing of the source position data to the relocation information until a possible debug break location is reached. Currently this is call sites with calls to code objects and JS return. Source position information in the code therefore no longer refers to the "first" instruction generated for a given source position (which was not the case defered code anyway) but to the first break location after that source position was passed (again defered code always start with source position information). This doesn't make a difference for the debugger as it will always be stopped only at debug break locations. However, this makes the life of the peep-hole optimizer much easier as many oportunities for posh/pop eliminations where previosly blocked by relocation information already written to the code object. Two types of source positions are still collected. Statement positions indicate the position of the start of the statement leading to this code and (plain) positions indicate other places typically call sites to help indicate current position in backtraces. The two different types of positions are also used to distinguish between step next and step in. Runs all the tests (including debugger tests) as before. Moved the checking for the FLAG_debug_info to one place. I will do the same changes to the ARM codegenerator in a seperate changelist. Review URL: http://codereview.chromium.org/2957 git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@335 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
2008-09-18 08:51:43 +00:00
int statement_position_;
int position_;
Label entry_label_;
Label exit_label_;
int registers_[RegisterAllocator::kNumRegisters];
#ifdef DEBUG
const char* comment_;
#endif
DISALLOW_COPY_AND_ASSIGN(DeferredCode);
};
// RuntimeStub models code stubs calling entry points in the Runtime class.
class RuntimeStub : public CodeStub {
public:
explicit RuntimeStub(Runtime::FunctionId id, int num_arguments)
: id_(id), num_arguments_(num_arguments) { }
void Generate(MacroAssembler* masm);
// Disassembler support. It is useful to be able to print the name
// of the runtime function called through this stub.
static const char* GetNameFromMinorKey(int minor_key) {
return Runtime::FunctionForId(IdField::decode(minor_key))->stub_name;
}
private:
Runtime::FunctionId id_;
int num_arguments_;
class ArgumentField: public BitField<int, 0, 16> {};
class IdField: public BitField<Runtime::FunctionId, 16, kMinorBits - 16> {};
Major MajorKey() { return Runtime; }
int MinorKey() {
return IdField::encode(id_) | ArgumentField::encode(num_arguments_);
}
const char* GetName();
#ifdef DEBUG
void Print() {
PrintF("RuntimeStub (id %s)\n", Runtime::FunctionForId(id_)->name);
}
#endif
};
class StackCheckStub : public CodeStub {
public:
StackCheckStub() { }
void Generate(MacroAssembler* masm);
private:
const char* GetName() { return "StackCheckStub"; }
Major MajorKey() { return StackCheck; }
int MinorKey() { return 0; }
};
class UnarySubStub : public CodeStub {
public:
UnarySubStub() { }
private:
Major MajorKey() { return UnarySub; }
int MinorKey() { return 0; }
void Generate(MacroAssembler* masm);
const char* GetName() { return "UnarySubStub"; }
};
class CEntryStub : public CodeStub {
public:
CEntryStub() { }
void Generate(MacroAssembler* masm) { GenerateBody(masm, false); }
protected:
void GenerateBody(MacroAssembler* masm, bool is_debug_break);
void GenerateCore(MacroAssembler* masm,
Label* throw_normal_exception,
Label* throw_out_of_memory_exception,
StackFrame::Type frame_type,
bool do_gc,
bool always_allocate_scope);
void GenerateThrowTOS(MacroAssembler* masm);
void GenerateThrowOutOfMemory(MacroAssembler* masm);
private:
Major MajorKey() { return CEntry; }
int MinorKey() { return 0; }
const char* GetName() { return "CEntryStub"; }
};
class CEntryDebugBreakStub : public CEntryStub {
public:
CEntryDebugBreakStub() { }
void Generate(MacroAssembler* masm) { GenerateBody(masm, true); }
private:
int MinorKey() { return 1; }
const char* GetName() { return "CEntryDebugBreakStub"; }
};
class JSEntryStub : public CodeStub {
public:
JSEntryStub() { }
void Generate(MacroAssembler* masm) { GenerateBody(masm, false); }
protected:
void GenerateBody(MacroAssembler* masm, bool is_construct);
private:
Major MajorKey() { return JSEntry; }
int MinorKey() { return 0; }
const char* GetName() { return "JSEntryStub"; }
};
class JSConstructEntryStub : public JSEntryStub {
public:
JSConstructEntryStub() { }
void Generate(MacroAssembler* masm) { GenerateBody(masm, true); }
private:
int MinorKey() { return 1; }
const char* GetName() { return "JSConstructEntryStub"; }
};
class ArgumentsAccessStub: public CodeStub {
public:
enum Type {
READ_LENGTH,
READ_ELEMENT,
NEW_OBJECT
};
explicit ArgumentsAccessStub(Type type) : type_(type) { }
private:
Type type_;
Major MajorKey() { return ArgumentsAccess; }
int MinorKey() { return type_; }
void Generate(MacroAssembler* masm);
void GenerateReadLength(MacroAssembler* masm);
void GenerateReadElement(MacroAssembler* masm);
void GenerateNewObject(MacroAssembler* masm);
const char* GetName() { return "ArgumentsAccessStub"; }
#ifdef DEBUG
void Print() {
PrintF("ArgumentsAccessStub (type %d)\n", type_);
}
#endif
};
} // namespace internal
} // namespace v8
#endif // V8_CODEGEN_H_