This refactors the instruction cache simulation to now be maintained
process-wide (as opposed to be per Isolate). It prepares for allowing
to share code between Isolates (e.g. WebAssembly or shared builtins)
while still allowing to simulate execution of such shared code.
R=clemensh@chromium.org
Change-Id: I5a6f083f4e32597565dc646f13b4445014c0daaa
Reviewed-on: https://chromium-review.googlesource.com/909130
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#51219}
Port 0761b55d21
Original Commit Message:
"Extend the code-generator tests to cover AssembleMove and AssembleSwap with
Simd128 registers and stack slots, for targets that support them.
For this to work however, we need support for passing Simd128 stack parameters
in TurboFan which this patch implements for Arm and x86. PPC and S390 both do
not support the Simd128 representation and it appears MIPS and MIPS64's
implementation of AssembleMove and AssembleSwap do not support it either.
As per the design of the tests, the set of values to perform moves on are
represented in a FixedArray of Smis (for kTagged) and HeapNumbers (for kFloat32
and kFloat64). They are converted to raw values for the moves to be performed
on, to be then converted back into a FixedArray. For the kSimd128
representation, we represent values as a FixedArray of 4 Smis, each representing
a lane. They are converted to a raw Simd128 vector using the `I32x4ReplaceLane`
and `I32x4ExtractLane` operations.
Finally, these tests need Simd128 variables mixed with the CodeStubAssembler
which is not a use-case officially supported. And as a result, the `RecordWrite`
stub does not guarantee to preserve Simd128 registers. To get around this, we
have to be careful to skip write barriers when dealing with Simd128 parameters
inside the "teardown" function, and we've had to move all allocations to the
"setup" function.
Thanks to this, we are able to catch bugs such as this one
https://bugs.chromium.org/p/v8/issues/detail?id=6843."
Change-Id: If867dedf4a2c72cb75c58effda93e3eec432fd67
Reviewed-on: https://chromium-review.googlesource.com/906469
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Ivica Bogosavljevic <ivica.bogosavljevic@mips.com>
Cr-Commit-Position: refs/heads/master@{#51142}
Simplified lowering may loose feedback by inserting Checked
conversions for BoundsChecks in case the bounds check gets
optimized away later on.
Bug: v8:7127
Change-Id: I254a29ba4e578d653d1dee2d70582ce0a4b57789
Reviewed-on: https://chromium-review.googlesource.com/878743
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Sigurd Schneider <sigurds@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50783}
This adds a new simplified operator NumberToString, which just lowers to
a call to the NumberToString builtin, and hooks that up to the typed
lowering (addressing a long-standing TODO).
Drive-by-fix: Also remove the %NumberToString runtime entry, and just
always use the %NumberToStringSkipCache entry from CSA, since we only
go there if the cache lookup already failed.
Bug: v8:5267, v8:7109
Change-Id: I5ca698c98679653813088a404f1fd38903a73c0e
Reviewed-on: https://chromium-review.googlesource.com/779099
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Michael Stanton <mvstanton@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50636}
The implementation can be greatly simplified by using variadic
templates.
R=mstarzinger@chromium.org
Change-Id: I8dbeea3d570bf0fac83109f334c48dbe39aaa853
Reviewed-on: https://chromium-review.googlesource.com/859785
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50611}
The implementation can be greatly simplified by using variadic
templates.
R=mstarzinger@chromium.org
Change-Id: Ifbda09bc536c9660a83d1888b395e92367c9b03e
Reviewed-on: https://chromium-review.googlesource.com/860458
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50603}
At the moment the slot index is encoded in the opcode. This, however,
sets an upper limit the slot index which is lower than what we want to
have (i.e. < 512). With this change we pass the slot index as an
immediate operand, which does not impose limits on the value it
contains.
R=titzer@chromium.org
Change-Id: Iab676186f41b8174bcc6c5a6053e6b0d5640ed3c
Reviewed-on: https://chromium-review.googlesource.com/866721
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50586}
This is the implementation of crrev.com/c/766371 for arm64.
Original description:
Add the ability to return (multiple) return values on the stack:
- Extend stack frames with a new buffer region for return slots.
This region is located at the end of a caller's frame such that
its slots can be indexed as caller frame slots in a callee
(located beyond its parameters) and assigned return values.
- Adjust stack frame constructon and deconstruction accordingly.
- Extend linkage computation to support register plus stack returns.
- Reserve return slots in caller frame when respective calls occur.
- Introduce and generate architecture instructions ('peek') for
reading back results from return slots in the caller.
- Aggressive tests.
- Some minor clean-up.
R=v8-arm-ports@googlegroups.com
Change-Id: I6e344a23f359861c9a1ff5a6511651c2176ce9a8
Reviewed-on: https://chromium-review.googlesource.com/842545
Reviewed-by: Ben Titzer <titzer@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50585}
This CL makes a fuzzer out of the cctest
test-multiple-return/ReturnMultipleRandom. The fuzzer creates a
CallDescriptor with input parameters and returns, and a function which
maps input parameters to returns. The fuzzer then calls this function
with a wrapper which checks that the correct mapping happened.
R=clemensh@chromium.org
Change-Id: Ib89c4063638baae69540a44486d7b2e9d13f8c1f
Reviewed-on: https://chromium-review.googlesource.com/859768
Reviewed-by: Ben Titzer <titzer@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50532}
This ensures that there is only one entrance point from C++ to
generated code, hence only one method has to be excluded from CFI.
It also introduces type safety by only allowing the code to be called
with the right arguments.
This CL includes minor drive-by fixes in the tests, like removing
unused dummy variables.
R=mstarzinger@chromium.org
Bug: v8:7182
Change-Id: Ied9164a2497db9e7c032324c5e082094fdffc72d
Reviewed-on: https://chromium-review.googlesource.com/852213
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50426}
In order to remove the CALL_GENERATED_CODE macro, it helps a lot to
unify the interfaces of the simulators and make the Call method variadic
in the number of arguments.
This CL does that for each simulator. A follow-up CL will then
completely remove the CALL_GENERATED_CODE macro and replace uses with
the (new) GeneratedCode wrapper.
R=mstarzinger@chromium.org
Bug: v8:7182
Change-Id: I1f81445ec2faba30f0bd233b022ae1f0fae4e96f
Reviewed-on: https://chromium-review.googlesource.com/850873
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50413}
Extend the code-generator tests to cover AssembleMove and AssembleSwap with
Simd128 registers and stack slots, for targets that support them.
For this to work however, we need support for passing Simd128 stack parameters
in TurboFan which this patch implements for Arm and x86. PPC and S390 both do
not support the Simd128 representation and it appears MIPS and MIPS64's
implementation of AssembleMove and AssembleSwap do not support it either.
As per the design of the tests, the set of values to perform moves on are
represented in a FixedArray of Smis (for kTagged) and HeapNumbers (for kFloat32
and kFloat64). They are converted to raw values for the moves to be performed
on, to be then converted back into a FixedArray. For the kSimd128
representation, we represent values as a FixedArray of 4 Smis, each representing
a lane. They are converted to a raw Simd128 vector using the `I32x4ReplaceLane`
and `I32x4ExtractLane` operations.
Finally, these tests need Simd128 variables mixed with the CodeStubAssembler
which is not a use-case officially supported. And as a result, the `RecordWrite`
stub does not guarantee to preserve Simd128 registers. To get around this, we
have to be careful to skip write barriers when dealing with Simd128 parameters
inside the "teardown" function, and we've had to move all allocations to the
"setup" function.
Thanks to this, we are able to catch bugs such as this one
https://bugs.chromium.org/p/v8/issues/detail?id=6843.
Bug: v8:6848
Change-Id: I8787d6339cdbfcd9356c5e8995925f0b45c562fa
Reviewed-on: https://chromium-review.googlesource.com/728599
Commit-Queue: Pierre Langlois <pierre.langlois@arm.com>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Bill Budge <bbudge@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50326}
Instead of these two instructions I generalize the kX64Peek instruction.
R=bmeurer@chromium.org
Change-Id: Ie5f8c7d428b65df3ca8b75594f6a06a75cc8e978
Reviewed-on: https://chromium-review.googlesource.com/839863
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50294}
On 32-bit platforms, float64 stack returns take 2 stack slots. In the
implemention of the kArmPeek instruction we assume that provided slot
index points to the first stack slot. However, due to an off-by-1 issue
the provided slot index pointed to the second stack slot. This CL fixes
the problem and generalizes an existing test which reproduces it.
R=v8-arm-ports@googlegroups.com
Change-Id: Ibb2fd8275cf912da064e2f863c2d64d2526caaac
Reviewed-on: https://chromium-review.googlesource.com/839761
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50291}
This patch updates the instruction selector and code generator to pad arguments
for arm64 and drop an even number of slots when dropping the arguments. It also
updates the builtins that handle arguments. These changes need to be made at
the same time.
It also adds some tests for forwarding varargs, as this was affected by the
builtin changes and the existing tests did not catch all issues.
Bug: v8:6644
Change-Id: I81318d1d1c9ab2568f84f2bb868d2a2d4cb56053
Reviewed-on: https://chromium-review.googlesource.com/829933
Commit-Queue: Georgia Kouveli <georgia.kouveli@arm.com>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50259}
This is a reland of bcf1172992
The test was timing out in no snapshot builds, as each CodeAssemblerTester
creates a new Context. Reduced the random iterations significantly.
Original change's description:
> [arm64] Preparation for padding of arguments
>
> As part of JSSP removal, we need to align the arguments passed to functions
> on the stack, by adding a padding slot when the total number of arguments
> is odd.
>
> This patch introduces the kPadArguments flag (which is currently set to
> false for all architectures), which will control padding of arguments in
> architecture-independent parts of the code (deoptimizer, instruction
> selector).
>
> It also adds some executable tests for tail calls with various stack
> parameter counts on the caller and callee sides.
>
> This will be turned on for arm64 together with arm64-specific changes to
> the code generator, the MacroAsembler and the builtins, in a later patch.
>
> Bug: v8:6644
> Change-Id: I79a5c149123fe8130cedd1ccffec3d9b50361e08
> Reviewed-on: https://chromium-review.googlesource.com/806554
> Commit-Queue: Georgia Kouveli <georgia.kouveli@arm.com>
> Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
> Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#50134}
TBR=jarin@chromium.org
Bug: v8:6644
Change-Id: I795877ed9791e126ffac6841dbbb65189e95d207
Reviewed-on: https://chromium-review.googlesource.com/833046
Commit-Queue: Georgia Kouveli <georgia.kouveli@arm.com>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50238}
There was an issue when the caller of a function with multiple returns
did not use all values which were returned over the stack. The caller
used only the used returns to calculate the offsets on the stack,
whereas the callee used all returns to calculate the offsets.
With this CL also the caller uses all returns to calculate the stack
offsets and thereby agrees again with the callee on the location of
all returns.
In addition I fixed an issue on x64: A quad word is reserved on the
stack frame to spill callee-saved FP registers, which is not pointer
size.
R=titzer@chromium.org
Change-Id: Ibe56b4b57e4b6e59071a868805b1237412344f93
Reviewed-on: https://chromium-review.googlesource.com/824043
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50193}
This change is quite invasive, because CheckSmi is lowered
through representation change depending on UseInfo to several
different checked conversion operators. This CL adds feedback
to every checked conversion operator to Int32.
Bug: v8:7127, v8:7204
Change-Id: Icb780e5a69d321c2ec161c3c2a32984bdcf101f1
Reviewed-on: https://chromium-review.googlesource.com/831521
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Sigurd Schneider <sigurds@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50167}
This reverts commit bcf1172992.
Reason for revert:
https://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20nosnap%20-%20debug/builds/16791
The test cctest/test-run-tail-calls/FuzzStackParamCount hangs on
the nosnap debug bot and times out.
Original change's description:
> [arm64] Preparation for padding of arguments
>
> As part of JSSP removal, we need to align the arguments passed to functions
> on the stack, by adding a padding slot when the total number of arguments
> is odd.
>
> This patch introduces the kPadArguments flag (which is currently set to
> false for all architectures), which will control padding of arguments in
> architecture-independent parts of the code (deoptimizer, instruction
> selector).
>
> It also adds some executable tests for tail calls with various stack
> parameter counts on the caller and callee sides.
>
> This will be turned on for arm64 together with arm64-specific changes to
> the code generator, the MacroAsembler and the builtins, in a later patch.
>
> Bug: v8:6644
> Change-Id: I79a5c149123fe8130cedd1ccffec3d9b50361e08
> Reviewed-on: https://chromium-review.googlesource.com/806554
> Commit-Queue: Georgia Kouveli <georgia.kouveli@arm.com>
> Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
> Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#50134}
TBR=rmcilroy@chromium.org,jarin@chromium.org,georgia.kouveli@arm.com
Change-Id: Iff4d7da418204834822842b160eacb8980058172
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:6644
Reviewed-on: https://chromium-review.googlesource.com/830847
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50144}
As part of JSSP removal, we need to align the arguments passed to functions
on the stack, by adding a padding slot when the total number of arguments
is odd.
This patch introduces the kPadArguments flag (which is currently set to
false for all architectures), which will control padding of arguments in
architecture-independent parts of the code (deoptimizer, instruction
selector).
It also adds some executable tests for tail calls with various stack
parameter counts on the caller and callee sides.
This will be turned on for arm64 together with arm64-specific changes to
the code generator, the MacroAsembler and the builtins, in a later patch.
Bug: v8:6644
Change-Id: I79a5c149123fe8130cedd1ccffec3d9b50361e08
Reviewed-on: https://chromium-review.googlesource.com/806554
Commit-Queue: Georgia Kouveli <georgia.kouveli@arm.com>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50134}
This operation was used to implement asm.js stores, but is obsolete
with asm.js stores now being lowered to normal graph nodes.
R=mstarzinger@chromium.orgCC=jarin@chromium.org
Bug:
Change-Id: Iea90b1a62be2e273c0562058642adc5b63ae2cf8
Reviewed-on: https://chromium-review.googlesource.com/822570
Commit-Queue: Ben Titzer <titzer@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50046}
The original CL introduced a test which uses a random number generator.
I disable the test for now, which is okay because this CL adds to a
work-in-progress feature anyways, and I will fix the problem in another
CL.
Original description:
Add the ability to return (multiple) return values on the stack:
- Extend stack frames with a new buffer region for return slots.
This region is located at the end of a caller's frame such that
its slots can be indexed as caller frame slots in a callee
(located beyond its parameters) and assigned return values.
- Adjust stack frame constructon and deconstruction accordingly.
- Extend linkage computation to support register plus stack returns.
- Reserve return slots in caller frame when respective calls occur.
- Introduce and generate architecture instructions ('peek') for
reading back results from return slots in the caller.
- Aggressive tests.
- Some minor clean-up.
So far, only ia32 and x64 are implemented.
Change-Id: I8b03fc4e53946daaa0e14a34603f4824a04fad7e
Reviewed-on: https://chromium-review.googlesource.com/819557
Reviewed-by: Ben Titzer <titzer@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50031}
This reverts commit 1e49864fa7.
Reason for revert: Crashing test on the waterfall https://logs.chromium.org/v/?s=chromium%2Fbb%2Fclient.v8%2FV8_Linux_gcc_4.8%2F16871%2F%2B%2Frecipes%2Fsteps%2FCheck%2F0%2Flogs%2FReturnMultipleRandom%2F0
Original change's description:
> [turbofan] Implement on-stack returns (Intel)
>
> Add the ability to return (multiple) return values on the stack:
>
> - Extend stack frames with a new buffer region for return slots.
> This region is located at the end of a caller's frame such that
> its slots can be indexed as caller frame slots in a callee
> (located beyond its parameters) and assigned return values.
> - Adjust stack frame constructon and deconstruction accordingly.
> - Extend linkage computation to support register plus stack returns.
> - Reserve return slots in caller frame when respective calls occur.
> - Introduce and generate architecture instructions ('peek') for
> reading back results from return slots in the caller.
> - Aggressive tests.
> - Some minor clean-up.
>
> So far, only ia32 and x64 are implemented.
>
> Change-Id: I9532ad13aa307c1dec40548c5b84600fe2f762ce
> Reviewed-on: https://chromium-review.googlesource.com/766371
> Commit-Queue: Andreas Haas <ahaas@chromium.org>
> Reviewed-by: Ben Titzer <titzer@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#49994}
TBR=titzer@chromium.org,rossberg@chromium.org,ahaas@chromium.org
Change-Id: Ib257e92448942f8ef07d5ef246f9381f4784f014
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://chromium-review.googlesource.com/819637
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50000}
Add the ability to return (multiple) return values on the stack:
- Extend stack frames with a new buffer region for return slots.
This region is located at the end of a caller's frame such that
its slots can be indexed as caller frame slots in a callee
(located beyond its parameters) and assigned return values.
- Adjust stack frame constructon and deconstruction accordingly.
- Extend linkage computation to support register plus stack returns.
- Reserve return slots in caller frame when respective calls occur.
- Introduce and generate architecture instructions ('peek') for
reading back results from return slots in the caller.
- Aggressive tests.
- Some minor clean-up.
So far, only ia32 and x64 are implemented.
Change-Id: I9532ad13aa307c1dec40548c5b84600fe2f762ce
Reviewed-on: https://chromium-review.googlesource.com/766371
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49994}
This is to avoid calling AssembleTailCallBeforeGap and AssembleTailCallAfterGap
directly where possible (so making the tests less dependent on the code generator
interface when we're not directly testing it). It also makes sure that the
instruction we pass to AssembleTailCallBeforeGap and AssembleTailCallAfterGap is
indeed a tail call, with the immediate argument that specifies the stack delta.
This is to prepare for padding arguments for arm64 JSSP removal. We will need to
store padding in AssembleTailCallAfterGap, which will need the information from
a TailCall instruction.
Bug: v8:6644
Change-Id: Ia5485412a4244c7b2a133aa0541b9f8285680de4
Reviewed-on: https://chromium-review.googlesource.com/806117
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Georgia Kouveli <georgia.kouveli@arm.com>
Cr-Commit-Position: refs/heads/master@{#49833}
The motivation is to avoid bugs such as the one fixed in
https://chromium-review.googlesource.com/c/v8/v8/+/800270.
Bug: v8:7109
Change-Id: I82a55f4a78d289d00ae7bafe78b45d92bab07a6b
Reviewed-on: https://chromium-review.googlesource.com/800291
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49829}
This patch normalizes the casing of hexadecimal digits in escape
sequences of the form `\xNN` and integer literals of the form
`0xNNNN`.
Previously, the V8 code base used an inconsistent mixture of uppercase
and lowercase.
Google’s C++ style guide uses uppercase in its examples:
https://google.github.io/styleguide/cppguide.html#Non-ASCII_Characters
Moreover, uppercase letters more clearly stand out from the lowercase
`x` (or `u`) characters at the start, as well as lowercase letters
elsewhere in strings.
BUG=v8:7109
TBR=marja@chromium.org,titzer@chromium.org,mtrofin@chromium.org,mstarzinger@chromium.org,rossberg@chromium.org,yangguo@chromium.org,mlippautz@chromium.org
NOPRESUBMIT=true
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel;master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: I790e21c25d96ad5d95c8229724eb45d2aa9e22d6
Reviewed-on: https://chromium-review.googlesource.com/804294
Commit-Queue: Mathias Bynens <mathias@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49810}
Some uses use uint64_t instead of int64_t to avoid compiler warnings
about illegal narrowing of values with the MSB set.
R=tebbi@chromium.org,mlippautz@chromium.org
Bug: v8:7109
Change-Id: I6e861f48828bd931c451ef336672a260c13ae042
Reviewed-on: https://chromium-review.googlesource.com/803275
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49797}
V8_INT64_C will be cleaned up in a follow-up CL.
R=tebbi@chromium.org,mlippautz@chromium.org
Bug: v8:7109
Change-Id: I6af97e7266039eb443896b404b77b8e2b5de5adb
Reviewed-on: https://chromium-review.googlesource.com/803294
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49790}
This ensures that the {Code::builtin_index} field is only set during
allocation of new {Code} objects, making this field truly immutable.
R=jgruber@chromium.org
BUG=v8:6792
Change-Id: Ic793346976183149e2d077e92cb9da3c925ea865
Reviewed-on: https://chromium-review.googlesource.com/774439
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49414}
Removes Isolate from compilation info and instead threads isolate through
function calls. This ensures that we can't access the isolate from
background thread compilations.
BUG=v8:5203
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: I9a4e1cd67c4736e36f609360b996fb55166a1c50
Reviewed-on: https://chromium-review.googlesource.com/751745
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49386}
Rather than having a single script compilation timer, split it into
multiple timers depending on the state of the (blink-owned) code cache
and (v8-owned) complation cache. This is intended to replace both the
script compilation time timer, and the compilation heuristic enum.
Also keep track of why blink might not want us to produce (or consume) a
code cache, and split the compilation timer on this as well.
Note, there is currently no timer for streaming sources, so these won't
show up in the histograms.
Bug: chromium:582873
Bug: chromium:769203
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: Ia32fff044f919e20e3cec73329e62e01e421b72a
Reviewed-on: https://chromium-review.googlesource.com/746922
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49065}
This moves the initialization of the {Code::stub_key} field into the
allocator for {Code} objects, essentially making the field in question
immutable after allocation.
R=verwaest@chromium.org
BUG=v8:6792
Change-Id: I8ba2ffeea792d0d566995c08e3572ae63a7c1e94
Reviewed-on: https://chromium-review.googlesource.com/739141
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48971}
The motivation for this is that it greatly reduces the RelocInfo size.
This also results in a small improvement in compile time.
Note: This CL was based on https://codereview.chromium.org/2651833003,
and basically reverts that CL (but handles code changes and some
minor bugs in previous code).
Bug: chromium:772780
Change-Id: I55dd48d3bddd4b3d1c8eec13791b3ee4c485c604
Reviewed-on: https://chromium-review.googlesource.com/730649
Reviewed-by: Mircea Trofin <mtrofin@chromium.org>
Reviewed-by: Eric Holk <eholk@chromium.org>
Commit-Queue: Karl Schimpf <kschimpf@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48947}
and use a newly-introduced "enum class Operation" in all
other places that so far passed Token::Values around.
Also delete some related dead code along the way.
Bug: v8:6921
Change-Id: I062f396d304aa62298cfeff202e3132a4a5597c1
Reviewed-on: https://chromium-review.googlesource.com/736851
Commit-Queue: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48944}
Previously, V8's slice was implemented in a combination of C++ and a
Javascript fallback. The disadvantage of this approach was that the
fast-path required a call through the CEntryStub, which introduced
considerable overhead for small arrays with fast elements kinds.
Now the implementation primarily uses the CSA to generate both the
full spec-complaint implementation as well as fast paths for argument
objects and arrays with fast elements kinds. The CSA implementation
uses a C++ implementation fallback in select situations where the the
complexity of a CSA implementation would be too great and the
CEntryStub overhead is not decisive (e.g. slices of dictionary
elements arrays).
Performance results on semi-random arrays with small number of
elements (old vs. new):
smi copy: 48.7 ms vs. 12 ms
smi slice: 43.5 ms 14.8 ms
object copy: 35.5 ms 7.7 ms
object slice: 38.7 ms 8.8 ms
dictionary slice: 2398.3 ms vs. 5.4 ms
fast sloppy arguments slice: 9.6 ms vs. 7.2 ms
slow sloppy arguments slice: 28.9 ms vs. 8.5 ms
As a bonus, the new implementation is fully spec-compliant and fixes
at least one existing bug.
The design document for Array.prototype builtin rework can be found
at https://goo.gl/wFHe2n
Bug: v8:1956,v8:6601,v8:6710,v8:6978
Change-Id: Ia0155bedcf39b4577605ff754f416c2af938efb7
Reviewed-on: https://chromium-review.googlesource.com/574710
Commit-Queue: Daniel Clifford <danno@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48853}
Even static constant fields need to have definitions outside of the
class scope if a reference to them is passed.
This CL fixes link errors which occured on an independent CL
(https://crrev.com/c/730716).
Drive-by: Make the fields constexpr.
R=mstarzinger@chromium.org
Change-Id: Iff5dd1f3d41ddfba0c20531dbecd63c1d4c670e8
Reviewed-on: https://chromium-review.googlesource.com/732114
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48816}
This is a reland of 6f93d59d92.
One more test had to be disabled (tracked by bug 6954), and
two machops tests needed to be changed to use boxed floats
and doubles.
Original change's description:
> [test] Add nan bit patterns to uint{32,64}_vector
>
> If you just cast those patterns to float or double and pass them
> around, the quiet/signaling NaN bit might change. We had several bugs
> around this, so add these patterns to the general input vectors.
>
> This uncovers a bug in the wasm interpreter, which will be fixed in a
> separate CL.
>
> R=ahaas@chromium.org
>
> Bug: v8:6947, v8:6954
> Change-Id: I205b8ab784b087b1e4988190fa725df0b90e7ee0
> Reviewed-on: https://chromium-review.googlesource.com/725345
> Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
> Reviewed-by: Andreas Haas <ahaas@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#48731}
Bug: v8:6947, v8:6954
Change-Id: I9a38b5d9324131c3950c537910371a73c93d2c13
Reviewed-on: https://chromium-review.googlesource.com/728439
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48780}
This also changes modulo to be more like others, e.g., Pow:
- have an inline Modulo
- have a modulo_double_double that we can use as FUNCTION_ADDR in assembler.cc
Bug:
Change-Id: Id360e4adcde5712ffc5ac22abd3bbaab6aec09f5
Reviewed-on: https://chromium-review.googlesource.com/728027
Commit-Queue: Toon Verwaest <verwaest@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48747}
This reverts commit 6f93d59d92.
Reason for revert: Breaks full-debug build:
https://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20full%20debug/builds/2239
Original change's description:
> [test] Add nan bit patterns to uint{32,64}_vector
>
> If you just cast those patterns to float or double and pass them
> around, the quiet/signaling NaN bit might change. We had several bugs
> around this, so add these patterns to the general input vectors.
>
> This oncovers a bug in the wasm interpreter, which will be fixed in a
> separate CL.
>
> R=ahaas@chromium.org
>
> Bug: v8:6947, v8:6954
> Change-Id: I205b8ab784b087b1e4988190fa725df0b90e7ee0
> Reviewed-on: https://chromium-review.googlesource.com/725345
> Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
> Reviewed-by: Andreas Haas <ahaas@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#48731}
TBR=ahaas@chromium.org,clemensh@chromium.org
Change-Id: I4ceb82eab5d4cbf1f335bf6f358178a17a2fd0ba
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:6947, v8:6954
Reviewed-on: https://chromium-review.googlesource.com/728101
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48745}
If you just cast those patterns to float or double and pass them
around, the quiet/signaling NaN bit might change. We had several bugs
around this, so add these patterns to the general input vectors.
This oncovers a bug in the wasm interpreter, which will be fixed in a
separate CL.
R=ahaas@chromium.org
Bug: v8:6947, v8:6954
Change-Id: I205b8ab784b087b1e4988190fa725df0b90e7ee0
Reviewed-on: https://chromium-review.googlesource.com/725345
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48731}
This is a reland of e737b4ce0d.
The issue on windows bots was fixed in https://crrev.com/c/725733.
Original change's description:
> [test] Avoid unnecessary std::vector allocations
>
> Instead of copying an array of fixed values into an std::vector for
> each usage of the FOR_INPUTS macro, just iterate the constant data
> directly.
> This also makes the <type>_vector() functions return {constexpr Vector}
> instead of {std::vector}.
>
> R=tebbi@chromium.org
>
> Change-Id: Ifc3e5509b2fbf5e383c967c2f46acf2b07f7b5b4
> Reviewed-on: https://chromium-review.googlesource.com/725427
> Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
> Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#48688}
Change-Id: I9ad5d22803bbbf35c458965497acc603cfa01b20
Reviewed-on: https://chromium-review.googlesource.com/725979
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48726}
This reverts commit e737b4ce0d.
Reason for revert: On windows, V8_INFINITY is not constexpr
Original change's description:
> [test] Avoid unnecessary std::vector allocations
>
> Instead of copying an array of fixed values into an std::vector for
> each usage of the FOR_INPUTS macro, just iterate the constant data
> directly.
> This also makes the <type>_vector() functions return {constexpr Vector}
> instead of {std::vector}.
>
> R=tebbi@chromium.org
>
> Change-Id: Ifc3e5509b2fbf5e383c967c2f46acf2b07f7b5b4
> Reviewed-on: https://chromium-review.googlesource.com/725427
> Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
> Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#48688}
TBR=clemensh@chromium.org,tebbi@chromium.org
Change-Id: Iccb52941d4efe71b49b41572c3d922a5d78bdfd2
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://chromium-review.googlesource.com/725899
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48691}
Instead of copying an array of fixed values into an std::vector for
each usage of the FOR_INPUTS macro, just iterate the constant data
directly.
This also makes the <type>_vector() functions return {constexpr Vector}
instead of {std::vector}.
R=tebbi@chromium.org
Change-Id: Ifc3e5509b2fbf5e383c967c2f46acf2b07f7b5b4
Reviewed-on: https://chromium-review.googlesource.com/725427
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48688}
This CL fixes all occurences that don't require special OWNER reviews,
or can be reviewed by Michi.
After this one, we should be able to reenable the readability/check
cpplint check.
R=mstarzinger@chromium.org
Bug: v8:6837, v8:6921
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng;master.tryserver.v8:v8_linux_noi18n_rel_ng
Change-Id: Ic81d68d5534eaa795b7197fed5c41ed158361d62
Reviewed-on: https://chromium-review.googlesource.com/721120
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48670}
Introduce new `SimulateMoves` and `SimulateSwaps` methods which take an initial
"state" as a FixedArray and perform a given list of moves on it. They give us
what the result of testing the CodeGenerator's AssembleMove and AssembleSwap
should be.
This way, we can now compare the results of running parallel moves with a
reference simulation.
Bug: v8:6848
Change-Id: I228f4310f32d2a82e0744afaff183e2c7ac08cb7
Reviewed-on: https://chromium-review.googlesource.com/723222
Commit-Queue: Pierre Langlois <pierre.langlois@arm.com>
Reviewed-by: Bill Budge <bbudge@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48656}
This CL removes the code specialization for WASM functions that access
globals. Previously, we were embedding the start address of the globals
memory (globals_start) as a constant in the code, which required
patching for every instance. We now put this base in to the WasmContext,
which is available as a parameter to every WasmFunction.
R=ahaas@chromium.org,
CC=mtrofin@chromium.org
Bug:
Change-Id: I04bb739e898cc5a3b7dd081cc166483022d113fd
Reviewed-on: https://chromium-review.googlesource.com/712595
Commit-Queue: Ben Titzer <titzer@chromium.org>
Reviewed-by: Mircea Trofin <mtrofin@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Bill Budge <bbudge@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48581}
New code should use nullptr instead of NULL.
This patch updates existing use of NULL to nullptr where applicable,
making the code base more consistent.
BUG=v8:6928,v8:6921
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng;master.tryserver.v8:v8_linux_noi18n_rel_ng
Change-Id: I4687f5b96fcfd88b41fa970a2b937b4f6538777c
Reviewed-on: https://chromium-review.googlesource.com/718338
Commit-Queue: Mathias Bynens <mathias@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48557}
This patch is a first step towards target independent tests for the
CodeGenerator's AssembleMove and AssembleSwap methods.
The tests on top of which this builds would only make sure that no assertions
were triggered while generating moves, and that the hardware is happy executing
them. We want to do more and check that the generated code performs correctly.
In a nutshell, this introduces a facility that can do the following:
- Setup an environment with registers and stack slots initialised with random
values.
- Perform a list of randomly generated moves and/or swaps on those.
- Return the resulting environment.
This is a first step and therefore is lacking a few things which will be
implemented as follow-ups:
- Support for kSimd128 moves and swaps.
- Support large offsets for stack moves, as well as positive and negative.
- Compare the resulting environment against the result of a reference
simulation.
For more background information, see this design document:
https://docs.google.com/document/d/1KpioxCmtiB_9RaPaRidZPVtKlZ2BaNKGPYUjKFihhK0
Bug: v8:6848
Change-Id: Ie7dc837f4444df010ab58c64b722d40ee5d2af72
Reviewed-on: https://chromium-review.googlesource.com/677398
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Bill Budge <bbudge@chromium.org>
Commit-Queue: Pierre Langlois <pierre.langlois@arm.com>
Cr-Commit-Position: refs/heads/master@{#48459}
This fixes some of the old legacy API that used empty Handle<>
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: I861e31a4a6f65bc497bfc512174adba39c17abca
Reviewed-on: https://chromium-review.googlesource.com/701634
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Sathya Gunasekaran <gsathya@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48311}
Removes script() from CompilationInfo since it might not be created when
compiling from a background thread.
BUG=v8:5203
Change-Id: Ic36fd04cf4792336707b2d3715d47c59b6a97faf
Reviewed-on: https://chromium-review.googlesource.com/690299
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48220}
The WasmContext struct introduced in this CL is used to store the
mem_size and mem_start address of the wasm memory. These variables can
be accessed at C++ level at graph build time (e.g., initialized during
instance building). When the GrowMemory runtime is invoked, the context
variables can be changed in the WasmContext at C++ level so that the
generated code will load the correct values.
This requires to insert a relocatable pointer only in the
JSToWasmWrapper (and in the other wasm entry points), the value is then
passed from function to function as an automatically added additional
parameter. The WasmContext is then dropped when creating an Interpreter
Entry or when invoking a JavaScript function. This removes the need of
patching the generated code at runtime (i.e., when the memory grows)
with respect to WASM_MEMORY_REFERENCE and WASM_MEMORY_SIZE_REFERENCE.
However, we still need to patch the code at instance build time to patch
the JSToWasmWrappers; in fact the address of the WasmContext is not
known during compilation, but only when the instance is built.
The WasmContext address is passed as the first parameter. This has the
advantage of not having to move the WasmContext around if the function
does not use many registers. This CL also changes the wasm calling
convention so that the first parameter register is different from the
return value register. The WasmContext is attached to every
WasmMemoryObject, to share the same context with multiple instances
sharing the same memory. Moreover, the nodes representing the
WasmContext variables are cached in the SSA environment, similarly to
other local variables that might change during execution. The nodes are
created when initializing the SSA environment and refreshed every time a
grow_memory or a function call happens, so that we are sure that they
always represent the correct mem_size and mem_start variables.
This CL also removes the WasmMemorySize runtime (since it's now possible
to directly retrieve mem_size from the context) and simplifies the
GrowMemory runtime (since every instance now has a memory_object).
R=ahaas@chromium.org,clemensh@chromium.org
CC=gdeepti@chromium.org
Change-Id: I3f058e641284f5a1bbbfc35a64c88da6ff08e240
Reviewed-on: https://chromium-review.googlesource.com/671008
Commit-Queue: Enrico Bacis <enricobacis@google.com>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48209}
Use the (D)CHECK_{EQ,NE,GT,...} macros instead of (D)CHECK with an
embedded comparison. This gives better error messages and also does the
right comparison for signed/unsigned mismatches.
This will allow us to reenable the readability/check cpplint check.
R=jarin@chromium.org
Bug: v8:6837
Change-Id: I712580c2a4326e06ee3d6d0eb4ff8c7d24f5fdb9
Reviewed-on: https://chromium-review.googlesource.com/671227
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48135}
This is a reland of c6b153fd69
Original change's description:
> [cctest] Add fuzz tests for generating parallel moves.
>
> These new tests are somewhat similar to the existing gap resolver tests except
> we use the code generator and eventually run the generated code. The main idea
> is to cover cases that are difficult to hit, such as move from/to slots which
> are out of range of loads and stores, but may happen nonetheless.
>
> At this time, the tests only make sure the code generator actually generated
> some code, and that this code runs. In the future, it would be great to also
> check that the moves were actually performed.
>
> Bug: v8:6553
> Change-Id: I089a25fa05b3a20649658bb8952926ab11f91d68
> Reviewed-on: https://chromium-review.googlesource.com/574850
> Commit-Queue: Pierre Langlois <pierre.langlois@arm.com>
> Reviewed-by: Bill Budge <bbudge@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#47733}
Bug: v8:6553
Change-Id: Ia3eac9d7e6a23e2f6fea839b71d460cb7ad6ff6e
Reviewed-on: https://chromium-review.googlesource.com/645868
Reviewed-by: Bill Budge <bbudge@chromium.org>
Commit-Queue: Pierre Langlois <pierre.langlois@arm.com>
Cr-Commit-Position: refs/heads/master@{#48115}
By adding a per test source file namespace, we can avoid a lot of
symbol collisions in jumbo builds.
While we're at it, let's remove some "using" statements that also
cause trouble.
Bug: chromium:746958
Change-Id: I6f8a723e1ba5905888638e0687b23193f3f012ca
Reviewed-on: https://chromium-review.googlesource.com/676803
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Mostyn Bramley-Moore <mostynb@opera.com>
Cr-Commit-Position: refs/heads/master@{#48102}
The previous %StringCharCodeAt runtime entry (and the inlined intrinsic)
are obsolete and not used anymore (except in dedicated tests for this
runtime function), so remove it. And rename the %StringCharCodeAtRT
function, which is actually used to %StringCharCodeAt instead to have
a consistent naming scheme for runtime fallbacks.
Bug: v8:5049
Change-Id: I619429ef54f6efea61fc51ab9ed1d5cfe4417f99
Reviewed-on: https://chromium-review.googlesource.com/657719
Commit-Queue: Yang Guo <yangguo@chromium.org>
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47928}
This required splitting wasm-run-utils.h in header and implementation,
since the anonymous namespace in wasm-run-utils.h is now gone.
This is a reasonable refactoring in itself.
R=titzer@chromium.orgCC=mstarzinger@chromium.org, mostynb@opera.com
Bug: chromium:746958
Change-Id: I0f3b30fef1865cd88eca37b69d0c3a9eb19e77ea
Reviewed-on: https://chromium-review.googlesource.com/647587
Reviewed-by: Ben Titzer <titzer@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47773}
This reverts commit c6b153fd69.
Reason for revert: Doesn't compile on the tree.
Original change's description:
> [cctest] Add fuzz tests for generating parallel moves.
>
> These new tests are somewhat similar to the existing gap resolver tests except
> we use the code generator and eventually run the generated code. The main idea
> is to cover cases that are difficult to hit, such as move from/to slots which
> are out of range of loads and stores, but may happen nonetheless.
>
> At this time, the tests only make sure the code generator actually generated
> some code, and that this code runs. In the future, it would be great to also
> check that the moves were actually performed.
>
> Bug: v8:6553
> Change-Id: I089a25fa05b3a20649658bb8952926ab11f91d68
> Reviewed-on: https://chromium-review.googlesource.com/574850
> Commit-Queue: Pierre Langlois <pierre.langlois@arm.com>
> Reviewed-by: Bill Budge <bbudge@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#47733}
TBR=bbudge@chromium.org,danno@chromium.org,jarin@chromium.org,pierre.langlois@arm.com,bmeurer@chromium.org
Change-Id: I875ab38e039fdbf58b8f08658c391147d2ec01fa
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:6553
Reviewed-on: https://chromium-review.googlesource.com/645446
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47734}
These new tests are somewhat similar to the existing gap resolver tests except
we use the code generator and eventually run the generated code. The main idea
is to cover cases that are difficult to hit, such as move from/to slots which
are out of range of loads and stores, but may happen nonetheless.
At this time, the tests only make sure the code generator actually generated
some code, and that this code runs. In the future, it would be great to also
check that the moves were actually performed.
Bug: v8:6553
Change-Id: I089a25fa05b3a20649658bb8952926ab11f91d68
Reviewed-on: https://chromium-review.googlesource.com/574850
Commit-Queue: Pierre Langlois <pierre.langlois@arm.com>
Reviewed-by: Bill Budge <bbudge@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47733}
This patch introduces a new container type ScriptOrModule which
provides the name and the host defined options of the script/module.
This patch also introduces a new PrimitivesArray that can hold
Primitive values, which the embedder can use to store metadata.
The HostDefinedOptions is passed to V8 through the ScriptOrigin, and
passed back to the embedder through HostImportModuleDynamically for
module loading.
Bug: v8:5785, v8:6658, v8:6683
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: I56c26fc9a680b273ac0a6691e5ad75f15b8dc80a
Reviewed-on: https://chromium-review.googlesource.com/622158
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Sathya Gunasekaran <gsathya@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47724}
There's no need to have the StringLengthProtector as a PropertyCell,
since it's only used to guard against deoptimization loops. This also
allows us to remove the use of the CompilationDependencies from the
JSTypedLowering.
R=jarin@chromium.org
Bug: v8:6759
Change-Id: I54a37be6b8064ca3475e3b321f928b6a9903f209
Tbr: mstarzinger@chromium.org
Reviewed-on: https://chromium-review.googlesource.com/637303
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47633}
Code size in snapshot can be reduced ~41KB
Contributed by kanghua.yu@intel.com
Bug: None
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: Ib73af39fe97cd38728affea40c593236f15bf6e5
Reviewed-on: https://chromium-review.googlesource.com/588751
Commit-Queue: Pan Deng <pan.deng@intel.com>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47531}
Fix MaxIndex in test-gap-resolver.cc so that the above check doesn't
fire.
Change-Id: I6588800281d797f3f8b33ced4c1b03315196fe44
Reviewed-on: https://chromium-review.googlesource.com/618809
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Albert Mingkun Yang <albertnetymk@google.com>
Cr-Commit-Position: refs/heads/master@{#47421}
This is a reland of 21da12a983
Original change's description:
> [Compiler] Remove CompileDebugCode and EnsureBytecode and replace with Compile
>
> Removes the Compiler::CompileDebugCode and Compiler::EnsureBytecode functions
> and replaces them with a Compiler::Compile(Handle<SharedFunctionInfo> shared)
> function. The code in compiler.cc is refactored to use this function to compile
> the SharedFunctionInfo when compiling a JSFunction.
>
> Also does some other cleanup:
> - Removes CompileUnoptimizedFunction and inlines into new Compiler function
> - Moves code to create top level SharedFunctionInfo into CompilerTopLevel and
> out of FinalizeUnoptimizedCompile.
>
> BUG=v8:6409
>
> Change-Id: Ic54afcd8eb005c17f3ae6b2355060846e3091ca3
> Reviewed-on: https://chromium-review.googlesource.com/613760
> Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
> Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
> Reviewed-by: Leszek Swirski <leszeks@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#47394}
TBR=yangguo@chromium.orgTBR=jarin@chromium.org
Bug: v8:6409
Change-Id: If2eae66a85f129e746a5ca5c04935540f3f86b04
Reviewed-on: https://chromium-review.googlesource.com/618886
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47399}
This reverts commit 21da12a983.
Reason for revert: Failing on arm64 simulator
Original change's description:
> [Compiler] Remove CompileDebugCode and EnsureBytecode and replace with Compile
>
> Removes the Compiler::CompileDebugCode and Compiler::EnsureBytecode functions
> and replaces them with a Compiler::Compile(Handle<SharedFunctionInfo> shared)
> function. The code in compiler.cc is refactored to use this function to compile
> the SharedFunctionInfo when compiling a JSFunction.
>
> Also does some other cleanup:
> - Removes CompileUnoptimizedFunction and inlines into new Compiler function
> - Moves code to create top level SharedFunctionInfo into CompilerTopLevel and
> out of FinalizeUnoptimizedCompile.
>
> BUG=v8:6409
>
> Change-Id: Ic54afcd8eb005c17f3ae6b2355060846e3091ca3
> Reviewed-on: https://chromium-review.googlesource.com/613760
> Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
> Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
> Reviewed-by: Leszek Swirski <leszeks@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#47394}
TBR=rmcilroy@chromium.org,yangguo@chromium.org,jarin@chromium.org,leszeks@chromium.org
Change-Id: I4ba63e82417a185f1528ff2633eb6c8872fbbfe5
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:6409
Reviewed-on: https://chromium-review.googlesource.com/618687
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47397}
Removes the Compiler::CompileDebugCode and Compiler::EnsureBytecode functions
and replaces them with a Compiler::Compile(Handle<SharedFunctionInfo> shared)
function. The code in compiler.cc is refactored to use this function to compile
the SharedFunctionInfo when compiling a JSFunction.
Also does some other cleanup:
- Removes CompileUnoptimizedFunction and inlines into new Compiler function
- Moves code to create top level SharedFunctionInfo into CompilerTopLevel and
out of FinalizeUnoptimizedCompile.
BUG=v8:6409
Change-Id: Ic54afcd8eb005c17f3ae6b2355060846e3091ca3
Reviewed-on: https://chromium-review.googlesource.com/613760
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47394}
* Avoid "using namespace" statements, which trigger clang's -Wheader-hygiene
warnings in jumbo builds.
* Undefine created macros at the end of source files.
BUG=chromium:746958
Change-Id: I5d25432c314437f607b0e1be22765a6764267ba6
Reviewed-on: https://chromium-review.googlesource.com/610962
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Mostyn Bramley-Moore <mostynb@opera.com>
Cr-Commit-Position: refs/heads/master@{#47347}
Deletes AstGraphBuilder and associated classes now that it is
unreachable. The following classes are also removed:
- ControlBuilders
- JSFrameSpecialization
- AstLoopAssignmentAnalysis
Also removes flags from compilation-info which are no longer used, and removes
the no-deoptimization paths from TypedOptimization, JsTypedLowering,
JSIntrinsicLowering and JSBuiltinLowering.
BUG=v8:6409
Change-Id: I63986e8e3497bf63c4a27ea8ae827b8a633d4a26
Reviewed-on: https://chromium-review.googlesource.com/583652
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47284}
Removes the pathways to use Full-Codegen from compiler.cc. Also removes all
paths to optimize using AstGraphBuilder, which relies on Full-codegen.
Cleans up ast-numbering, runtime-profiler and some runtime functions to
remove now dead code.
This makes Full-codegen and AstGraphBuilder dead, but doesn't remove their
code yet, that will be done in a followup CL to keep things reviewable.
BUG=v8:6409
Change-Id: I3901ff17d960b2bb084cef0cb39fa16cb8419881
Reviewed-on: https://chromium-review.googlesource.com/583328
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47277}
This is in preparation to the removal of the FullCodeGenerator, we no
longer need the ability to stress the underlying implementation.
R=rmcilroy@chromium.org
BUG=v8:6409
Cq-Include-Trybots: master.tryserver.v8:v8_linux_noi18n_rel_ng
Change-Id: Iad3177d6de4a68b57c12a770b6e85ed7a9710254
Reviewed-on: https://chromium-review.googlesource.com/584747
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47276}
Splits out AttachOuterScopeInfo from DeclarationScope::Analyze and attaches
the outer scope info after parsing has completed (when parsing on the main
thread, which is the only time we have an outer scope info) instead of
during Compiler::Analyse().
BUG=v8:5203
TBR=yangguo@chromium.org
Change-Id: Idd8d2409fb20f09a9f6bbf5cff7e6edcf90077d7
Reviewed-on: https://chromium-review.googlesource.com/605889
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47243}
Moves the construction of CompilationInfo for unoptimized code into
GenerateUnoptimizedCode in preparation for making it owned by the
unoptimized compilation jobs (to be done in a followup CL).
This CL also adds a new constructor for creation of unoptimized
CompilationInfos with fields correctly initialized and updates the existing
constructor to he exclusively for optimized compilation. Finally, also moves
the call to RecordFunctionCompilation with LAZY_COMPILE_TAG recording into
FinalizeUnoptimizedCompilationJob where it is called for other unoptimized
compiles.
BUG=v8:5203,v8:6659
Change-Id: Icfd7f56588073f2fc547e002db9fa99843ed2e8b
Reviewed-on: https://chromium-review.googlesource.com/598908
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47160}
Don't hold a pointer to parse_info in compilation_info, and instead explicitly
add the fields needed in compiation_info. The intention is to make ParseInfo
only actually needed for parsing, and eventually make it possible to compile
with only a CompileInfo.
BUG=v8:5203
Change-Id: Iecd39245e44c218874401c3991eeaf3ceef2816f
Reviewed-on: https://chromium-review.googlesource.com/595738
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47119}
This removes the obsolete {Crankshaft} factory method as it returns the
same configuration as the {Turbofan} factory by now. We now consistently
use {RegisterConfiguration::Default} everywhere.
R=jkummerow@chromium.org
BUG=v8:6408
Change-Id: I6be25774aa6714ef4dc1ef6856bb6dbc95593a29
Reviewed-on: https://chromium-review.googlesource.com/597858
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47109}
My goal was to move breakpoint API to native with minimal changes around, so on inspector side we use v8::debug::BreakpointId instead of String16, on v8::internal::Debug we use i::BreakPoint object instead of break point object created inside of debug.js.
There are a lot of opportunities how we can improve breakpoints (at least we can avoid some of linear lookups to speedup implementation) but I think that as first step we need to remove mirrors/debug.js APIs.
Drive by: debugger-script.js and usage of debugger context in inspector code base.
R=yangguo@chromium.org,jgruber@chromium.org,clemensh@chromium.org
Bug: v8:5510,chromium:652939
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel;master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: I0b17972c39053dd4989bbe26db2bb0b88ca378f7
Reviewed-on: https://chromium-review.googlesource.com/593156
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47091}
In the process, cleanup some of the maths and functionality used to setup
descriptors and compute parameters. Also cleanup and correct the context
passing.
Change-Id: I6b6629bc81ef1c03425332dd6eadf3085efec7c9
Reviewed-on: https://chromium-review.googlesource.com/588892
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Daniel Clifford <danno@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46938}
Moves parser internalization of ast values out of
ParseAny/Program/Function and instead internalizes during compile
finalization. Currently also internalizes during scope analysis if
there is a ScopeInfo to enable variable name lookups. We also
internalize early for FCG / AstGraphBuilder.
BUG=v8:5203
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: Ia766795947d847517b87cd5ea39797347083174b
Reviewed-on: https://chromium-review.googlesource.com/582407
Reviewed-by: Georg Neis <neis@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46904}
Move ScopeInfo allocation out of DeclarationScope::Analyse and do it later
in the compile when finalizing unoptimized code generation. This is to enable
scope analysis to be done without heap allocation so it could run off-thread.
BUG=v8:5203
Change-Id: I954aacd4353925bbbd5a940d979027de2c52e1fd
Reviewed-on: https://chromium-review.googlesource.com/581108
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46862}
Removes the SharedFunctionInfo field from the ParseInfo structure. Instead
require a SharedFunctionInfo to be explicitly passed to ParseFunction.
Also renames GetUnoptimizedCode to CompileUnoptimizedFunction to make it
clear it should only be called for non-top-level code.
BUG=v8:5203
Change-Id: Ibce016e6a5290c3685f7f0a2f5fb1eb2df2ffc3b
Reviewed-on: https://chromium-review.googlesource.com/574589
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46814}
There remained a few of regressions and we didn't see any significant
improvement in the real world with this turned on. This CL reverts all the
StringConcat bytecode work which landed.
BUG=v8:6243
Change-Id: I832eb72e880ad41411dbec8fe29f71ef0f2025c8
Reviewed-on: https://chromium-review.googlesource.com/575130
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46769}
This is a reland of a72b2f88a8
Original change's description:
> [arm] Restrict grouping pushes before a TailCall to registers only
>
> We optimize parallel moves performed before a TailCall by grouping adjacent
> pushes. This way, we may use a single instruction to push multiple registers at
> once. However, we also have support for pushing immediates and stack slots for
> which the benefit is questionnable therefore this patch removes support for
> them.
>
> Concerning immediate pushes, it looks like a mistake since we do not have
> support for this case in `AssembleMove` so this patch removes it. Furthermore,
> if we add a test for this case, we see that a `push ip` instruction is
> generated, effectively pushing whatever was in `ip` at the time instead of
> pushing a constant.
>
> Concerning stack slot pushes, we generate a more or less equivalent sequence of
> instructions.
>
> Finally, grouping floating point pushes is not used anywhere so this patch
> removes support for this also.
>
> Bug: v8:6553
> Change-Id: I9b820d33361fc442dd813f66e1f96cda41009110
> Reviewed-on: https://chromium-review.googlesource.com/567191
> Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
> Commit-Queue: Pierre Langlois <pierre.langlois@arm.com>
> Cr-Commit-Position: refs/heads/master@{#46718}
Bug: v8:6553
Change-Id: Ib9a55dae7cc5db6185d163c56088ff23426d04bb
Reviewed-on: https://chromium-review.googlesource.com/576087
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Pierre Langlois <pierre.langlois@arm.com>
Cr-Commit-Position: refs/heads/master@{#46754}
- use asm_tester instead of data variable name
- directly expose Variable and Label for convenience
Change-Id: I211fe07e236f96067037ca00c1435c1491121e6b
Reviewed-on: https://chromium-review.googlesource.com/574914
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Peter Marshall <petermarshall@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46738}
This reverts commit a72b2f88a8.
Reason for revert: Breaks https://build.chromium.org/p/client.v8.ports/builders/V8%20Linux%20-%20arm64%20-%20sim%20-%20debug/builds/7093
Original change's description:
> [arm] Restrict grouping pushes before a TailCall to registers only
>
> We optimize parallel moves performed before a TailCall by grouping adjacent
> pushes. This way, we may use a single instruction to push multiple registers at
> once. However, we also have support for pushing immediates and stack slots for
> which the benefit is questionnable therefore this patch removes support for
> them.
>
> Concerning immediate pushes, it looks like a mistake since we do not have
> support for this case in `AssembleMove` so this patch removes it. Furthermore,
> if we add a test for this case, we see that a `push ip` instruction is
> generated, effectively pushing whatever was in `ip` at the time instead of
> pushing a constant.
>
> Concerning stack slot pushes, we generate a more or less equivalent sequence of
> instructions.
>
> Finally, grouping floating point pushes is not used anywhere so this patch
> removes support for this also.
>
> Bug: v8:6553
> Change-Id: I9b820d33361fc442dd813f66e1f96cda41009110
> Reviewed-on: https://chromium-review.googlesource.com/567191
> Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
> Commit-Queue: Pierre Langlois <pierre.langlois@arm.com>
> Cr-Commit-Position: refs/heads/master@{#46718}
TBR=danno@chromium.org,jarin@chromium.org,pierre.langlois@arm.com,bmeurer@chromium.org
Change-Id: Ib9db9e6e4f033aeea32741e04b1b884429acc800
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:6553
Reviewed-on: https://chromium-review.googlesource.com/574908
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46719}
We optimize parallel moves performed before a TailCall by grouping adjacent
pushes. This way, we may use a single instruction to push multiple registers at
once. However, we also have support for pushing immediates and stack slots for
which the benefit is questionnable therefore this patch removes support for
them.
Concerning immediate pushes, it looks like a mistake since we do not have
support for this case in `AssembleMove` so this patch removes it. Furthermore,
if we add a test for this case, we see that a `push ip` instruction is
generated, effectively pushing whatever was in `ip` at the time instead of
pushing a constant.
Concerning stack slot pushes, we generate a more or less equivalent sequence of
instructions.
Finally, grouping floating point pushes is not used anywhere so this patch
removes support for this also.
Bug: v8:6553
Change-Id: I9b820d33361fc442dd813f66e1f96cda41009110
Reviewed-on: https://chromium-review.googlesource.com/567191
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Pierre Langlois <pierre.langlois@arm.com>
Cr-Commit-Position: refs/heads/master@{#46718}
We only optimize functions which are already compiled, so there is no need
to ensure baseline in pipeline.cc, and since ast-graph-builder doesn't
do inlining, there are no other uses.
BUG=v8:5203, v8:6409
Change-Id: I830c8868d50363f61193a96d9a5774e059a1af0e
Reviewed-on: https://chromium-review.googlesource.com/570033
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46649}
Removes the --ignition flag which is now on by default. Adds a
--stress-fullcodegen flag which enables running all functions supported
by fullcodegen to be compiled by fullcodegen.
This will enable moving parser internalization later when we are not
stressing fullcodegen or compiling asm.js functions.
BUG=v8:5203, v8:6409, v8:6589
Change-Id: I7fa68016d4e734755434ec0b4e749ef65ffa7f4e
Reviewed-on: https://chromium-review.googlesource.com/565569
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46635}
This adds a convenience method for the common Smi to int conversion
pattern.
Bug:
Change-Id: I7d7b171c36cfec5f6d10c60f1d9c3e06e3aed0fa
Reviewed-on: https://chromium-review.googlesource.com/563205
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Andreas Rossberg <rossberg@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46516}
TruncateDoubleToI generated a 32-bit result but did not clear the upper
32 bits. This violated the invariant that the upper 32 bits should be
cleared when the result is 32 bits. This change fixes the bug mentioned
below. Clearing the upper 32 bits is also done on x64.
R=v8-arm-ports@googlegroups.com, titzer@chromium.org, martyn.capewell@arm.com
Bug: chromium:738952
Change-Id: I7e23e03fbed380ff08803db41fbae6382957ba08
Reviewed-on: https://chromium-review.googlesource.com/559671
Reviewed-by: Martyn Capewell <martyn.capewell@arm.com>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46440}
Uninitialized property accesses are replaced with SOFT deopts in
TurboFan, but uninitialized JSCall nodes are not, and instead they
just stick around and are also not being inlined because the heurstic
in TurboFan doesn't consider those candidates since their call frequency
is below the threshold. This unifies the behavior and also replaces
uninitialized calls with SOFT deopts, addressing some inconsistency in
optimization behavior as discovered by Brian White of Node for example
here: https://twitter.com/mscdexdotexe/status/879005026202640385R=jarin@chromium.org
BUG=v8:4551, v8:5267
Review-Url: https://codereview.chromium.org/2956843002
Cr-Commit-Position: refs/heads/master@{#46231}
This removes the --turbo flag and solely relies on the filter pattern
provided via --turbo-filter when deciding whether to use TurboFan. Note
that disabling optimization wholesale can still be done with --no-opt,
which should be used in favor of --no-turbo everywhere.
Also note that this contains semantic changes to the TurboFan activation
criteria. We respect the filter pattern more stringently and no longer
activate TurboFan just because the source contains patterns forcing use
of Ignition via {AstNumberingVisitor::DisableFullCodegenAndCrankshaft}.
R=rmcilroy@chromium.org
BUG=v8:6408
Change-Id: I0c855f6a62350eb62283a3431c8cc1baa750950e
Reviewed-on: https://chromium-review.googlesource.com/528121
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Michael Stanton <mvstanton@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46167}
This removes the ability to prepare bailout points in code generated by
the {FullCodeGenerator}. Such code is no longer used as the target of
deoptimization attempts, hence storing deoptimization data is obsolete.
R=jarin@chromium.org
BUG=v8:6409
Change-Id: I3200182a6e88014ce953881fa0d1ac0bc65ee424
Reviewed-on: https://chromium-review.googlesource.com/533153
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45939}
The AST-based graph builder is by now only used for asm.js code. This
change hard-codes this assumption into the compilation pipeline and
hence allows us to remove support pertaining to deoptimization from
optimized code that was not derived from bytecode.
R=jarin@chromium.org
BUG=v8:6409
Change-Id: I1138f16f663db5b9ee34e3110184067b8fcffc8b
Reviewed-on: https://chromium-review.googlesource.com/531026
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45887}
Callables for TF builtins are autogenerated and accessible through
Builtins::CallableFor. This removes the manually written accessors from
CodeFactory.
Bug: v8:6474,v8:5737
Change-Id: I9d8dec97995471c1bb258147220c190bf72e5de8
Reviewed-on: https://chromium-review.googlesource.com/530745
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45839}
This CL removes most occurences of "WASM" from outputs and comments in
the code. They are replaced either by "WebAssembly" or (especially in
comments) "wasm". These are the spellings officially proposed on
http://webassembly.org/.
R=ahaas@chromium.org
BUG=v8:6474
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: Id39fa5e25591678263745a4eab266db546e65983
Reviewed-on: https://chromium-review.googlesource.com/529085
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45824}
Adds support for lowering of ToPrimitiveToString and StringConcat bytecodes
to the corresponding builtins. As part of this, moves the interpreter
implementation of these operations into the appropriate builtin generators
and add builtin support for them.
Also adds TailCallRuntimeN operator to code-assembler which enables tail calling
a runtime function when the arguments have already been pushed onto the stack.
BUG=v8:6243
Change-Id: Id5c851bc42e4ff490d9a23a8990ae331c7eac73e
Reviewed-on: https://chromium-review.googlesource.com/515362
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45756}
Reland d8bfdb7a99
Original commit message:
If alignment parameter is set, the memory returned by the
StackSlot operator will be aligned according to the parameter.
The implementation goes like this. If alignment parameter is set
we allocate a bit more memory than actually needed and so we
can move the beginning of the StackSlot in order to have it aligned.
BUG=
Review-Url: https://codereview.chromium.org/2874713003
Cr-Commit-Position: refs/heads/master@{#45339}
Reason for revert:
Seems to break cfi:
https://build.chromium.org/p/client.v8/builders/V8%20Linux64%20-%20cfi/builds/9989
Original issue's description:
> [turbofan] Add alignment parameter to StackSlot operator
>
> If alignment parameter is set, the memory returned by the
> StackSlot operator will be aligned according to the parameter.
>
> The implementation goes like this. If alignment parameter is set
> we allocate a bit more memory than actually needed and so we
> can move the beginning of the StackSlot in order to have it aligned.
>
>
> BUG=
>
> Review-Url: https://codereview.chromium.org/2816743003
> Cr-Commit-Position: refs/heads/master@{#45197}
> Committed: d8bfdb7a99TBR=ahaas@chromium.org,clemensh@chromium.org,titzer@chromium.org,bmeurer@chromium.org,ivica.bogosavljevic@imgtec.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review-Url: https://codereview.chromium.org/2867403002
Cr-Commit-Position: refs/heads/master@{#45203}
If alignment parameter is set, the memory returned by the
StackSlot operator will be aligned according to the parameter.
The implementation goes like this. If alignment parameter is set
we allocate a bit more memory than actually needed and so we
can move the beginning of the StackSlot in order to have it aligned.
BUG=
Review-Url: https://codereview.chromium.org/2816743003
Cr-Commit-Position: refs/heads/master@{#45197}
Instead of explicitly instantiating six copies of each function for
zero to five arguments, define them as variadic template.
This avoids the arbitrary limit to five arguments, and avoids lots of
code duplication.
Drive-by fix: [iwyu] Add missing include.
R=mstarzinger@chromium.org
Change-Id: Id7edde3611ddfade16c7afbbf4b9000cedd76468
Reviewed-on: https://chromium-review.googlesource.com/496247
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45130}
1. Generalize context specialization such that the provided context
can be any outer context of the function, not necessarily the
immediate outer context.
2. Based on this: if function specialization is disabled, then
specialize for the module context if there is one.
3. Extend typed lowering of module loads and stores such that if
the operand is a Module constant, we constant-fold the cell load.
That is, a JSLoadModule with a Module HeapConstant input becomes
a LoadField with a Cell HeapConstant input, and similarly for
JSStoreModule.
BUG=v8:1569
Review-Url: https://codereview.chromium.org/2841613002
Cr-Commit-Position: refs/heads/master@{#45083}
The spec requires truncation while ToUint32 originally rounded down.
This also adds a bunch of test cases to check edge case behavior.
BUG=v8:6212
Review-Url: https://codereview.chromium.org/2805783003
Cr-Commit-Position: refs/heads/master@{#44487}
A step towards removing isolate from ParseInfo.
Removing isolate from ParseInfo will make it easier to create and
execute parse tasks on background threads.
BUG=v8:6093
Change-Id: I0a3546618d01b9232014da94cf8d0f72427a0d1d
Reviewed-on: https://chromium-review.googlesource.com/458006
Commit-Queue: Wiktor Garbacz <wiktorg@google.com>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Daniel Vogelheim <vogelheim@chromium.org>
Reviewed-by: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44176}
A step towards removing isolate from ParseInfo.
Removing isolate from ParseInfo will make it easier to create and
execute parse tasks on background threads.
BUG=v8:6093
Change-Id: Ief4eb3c9873026a93338d5556985f31c9abe17e6
Reviewed-on: https://chromium-review.googlesource.com/458005
Commit-Queue: Wiktor Garbacz <wiktorg@google.com>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Daniel Clifford <danno@chromium.org>
Reviewed-by: Marja Hölttä <marja@chromium.org>
Reviewed-by: Daniel Vogelheim <vogelheim@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44173}
A step towards removing isolate from ParseInfo.
Removing isolate from ParseInfo will make it easier to create and
execute parse tasks on background threads.
BUG=v8:6093
Change-Id: I977eec8faecc8a112506f219994b4e4ec388b180
Reviewed-on: https://chromium-review.googlesource.com/458004
Commit-Queue: Wiktor Garbacz <wiktorg@google.com>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Daniel Vogelheim <vogelheim@chromium.org>
Reviewed-by: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44160}
A step towards removing isolate from ParseInfo.
Removing isolate from ParseInfo will make it easier to create and
execute parse tasks on background threads.
BUG=v8:6093
Change-Id: I25b23b3bf64502f84c28ce688ad2997c9665a069
Reviewed-on: https://chromium-review.googlesource.com/458003
Reviewed-by: Daniel Clifford <danno@chromium.org>
Reviewed-by: Marja Hölttä <marja@chromium.org>
Reviewed-by: Daniel Vogelheim <vogelheim@chromium.org>
Commit-Queue: Wiktor Garbacz <wiktorg@google.com>
Cr-Commit-Position: refs/heads/master@{#44140}
A step towards removing isolate from ParseInfo.
Removing isolate from ParseInfo will make it easier to create and
execute parse tasks on background threads.
BUG=v8:6093
Change-Id: Iefd2fd01a700509f05d6f1a272cfa39cc545d39b
Reviewed-on: https://chromium-review.googlesource.com/458001
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Daniel Vogelheim <vogelheim@chromium.org>
Reviewed-by: Marja Hölttä <marja@chromium.org>
Commit-Queue: Wiktor Garbacz <wiktorg@google.com>
Cr-Commit-Position: refs/heads/master@{#44096}
The code-generator used i.InputInt6 to get the mask-width from the
instruction. However, thereby 64 got wrapped to 0, which is an invalid
mask width. I changed the i.InputInt6 to an i.InputInt32, which should
be okay because the mask-width comes from base::bits::CountPopulation64.
BUG=v8:6122
R=bmeurer@chromium.org, v8-arm-ports@googlegroups.com
Review-Url: https://codereview.chromium.org/2755373002
Cr-Commit-Position: refs/heads/master@{#43927}
This is a first step towards moving Turbofan code generation off the main thread.
Summary of the changes:
- AssemblerBase no longer has a pointer to the isolate. Instead, its
constructor receives the few things that it needs from the isolate (on most
architectures this is just the serializer_enabled flag).
- RelocInfo no longer has a pointer to the isolate. Instead, the functions
that need it take it as an argument. (There are currently still a few that
implicitly access the isolate through a HeapObject.)
- The MacroAssembler now explicitly holds a pointer to the isolate (before, it
used to get it from the Assembler).
- The jit_cookie also moved from AssemblerBase to the MacroAssemblers, since
it's not used at all in the Assemblers.
- A few architectures implemented parts of the Assembler with the help
of a Codepatcher that is based on MacroAssembler. Since the Assembler no
longer has the isolate, but the MacroAssembler still needs it, this doesn't
work anymore. Instead, these Assemblers now use a new PatchingAssembler.
BUG=v8:6048
Review-Url: https://codereview.chromium.org/2732273003
Cr-Commit-Position: refs/heads/master@{#43890}
Adds a TestTypeof bytecode to deal with comparisons of the form:
typeof(object) === 'string';
Also adds support to Turbofan to perform these comparisons without
inserting checkpoints.
BUG=v8:4280,v8:5267
Change-Id: Ib5cc1c6816dfe70a4120838d8eada2fc0267750f
Reviewed-on: https://chromium-review.googlesource.com/454837
Reviewed-by: Mythri Alle <mythria@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43832}
This introduces a new truncation bit for truncation of minus-zero to zero.
At the moment it is only used to handle the limit cases of deopt, such as the
one in the Google maps workload (see simplified version below), where the -q
(which is desugared to q * -1.0) currently deoptimizes because the result would
produce minus zero. To handle this situation, we exploit the knowledge that
righthand side of + cannot be -0, so even if lefthand side was -0, the result
would still be 0 (so the + operation cannot distinguish between left hand side
0 and -0).
function f(q) {
q -= 4;
return (-q) + q;
}
f(10);
f(10);
%OptimizeFunctionOnNextCall(f);
f(4);
Review-Url: https://codereview.chromium.org/2734253002
Cr-Commit-Position: refs/heads/master@{#43661}
From asm.js code we might get an empty ArrayBuffer as heap memory. In
this case, both the old memory start and the new memory start will be
nullptr. The size however has to be patched from default_size to 0.
This CL changes code specialization to be able to either patch memory
references, or patch memory sizes or both.
R=titzer@chromium.org, ahaas@chromium.org
BUG=chromium:698587
Change-Id: I4d9d811d75cb83842f23df317e8e7fc02aeb5146
Reviewed-on: https://chromium-review.googlesource.com/450257
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43613}
We don't need the JSStrictNotEqual operator in the compiler, because
this is never generated by the BytecodeGraphBuilder, and the code in
the AstGraphBuilder was dead code. Also remove the backing builtin
StrictNotEqual.
R=mstarzinger@chromium.org
BUG=v8:5267
Review-Url: https://codereview.chromium.org/2727003006
Cr-Commit-Position: refs/heads/master@{#43594}
This CL fixes a bug in the implementation of the code generation of
kArm64Tst32, where the shift input operand of kArm64Tst32 was ignored.
Please take a special look at the fix in kArm64Tst. I applied the fix
there as well, but because of differences in the instruction selector
I was not able to write a test for it.
R=v8-arm-ports@googlegroups.com
BUG=v8:6028
Review-Url: https://codereview.chromium.org/2729853003
Cr-Commit-Position: refs/heads/master@{#43555}
This handles all arithmetic binary operations except addition during the
early type-hint lowering (i.e. during graph construction). We still use
static type information to potentially further reduce the speculative
operations down to pure operations during the typed lowering phase.
R=bmeurer@chromium.org
Change-Id: I8b93fd7c46ec8e5b81234a49624d503520c3d082
Reviewed-on: https://chromium-review.googlesource.com/443105
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43218}
This allows part of typed lowering that is solely based on type-hints to
run as part of the graph construction. The lowering in question does not
inspect types and hence doesn't require the typer to have run before. We
insert the speculative simplied-level operations in favor of the generic
JavaScript-level variants.
R=bmeurer@chromium.org
Change-Id: I5f0549fc1e4ff607622ee9059e6232a32f77db2e
Reviewed-on: https://chromium-review.googlesource.com/442584
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43208}
Reason for revert:
Reverting due to causing Word64AndWithImmediateWithWord64Sh to fail locally (but not on the bot).
BUG=v8:5956
Original issue's description:
> [arm64] A shift of 0 is not allowed in ubfx.
>
> R=bmeurer@chromium.org, v8-arm-ports@googlegroups.com
> BUG=v8:5951
>
> Review-Url: https://codereview.chromium.org/2685943003
> Cr-Commit-Position: refs/heads/master@{#43090}
> Committed: c46ccef921TBR=bmeurer@chromium.org,v8-arm-ports@googlegroups.com,martyn.capewell@arm.com,ahaas@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5951
Review-Url: https://codereview.chromium.org/2687373002
Cr-Commit-Position: refs/heads/master@{#43105}
In order to allow parallel compilation of eager inner functions, we need to
seperate the zone used for parsing (which will be shared between all the
parallel compile jobs) and the zone used for compilation. This CL changes
CompilationInfo to require a zone (which can be different from the zone in
ParseInfo). We then seal the ParseInfo zone after parsing and analysis is done
to prevent any further allocation in that zone, so that it can be shared
(read-only) with the parallel compile jobs.
BUG=v8:5203
Review-Url: https://codereview.chromium.org/2645403002
Cr-Commit-Position: refs/heads/master@{#43089}
Arm64 compiles "x +_64 (y >> shift)" into a single instruction if
"shift" is a constant. The code generator expects that "shift" is a
32 bit constant. however, TurboFan can also pass in a 64 bit constant,
which caused a crash in the code generator.
With this CL we cast the constant of TurboFan to an int in the
instruction selector and thereby satisfy the assumption of the code
generator. This should be correct since the code generator anyways cast
the "shift" to an int5 or int6 eventually.
R=v8-arm-ports@googlegroups.com
BUG=v8:5923
Review-Url: https://codereview.chromium.org/2669203005
Cr-Commit-Position: refs/heads/master@{#43036}
The AstGraphBuilder is used for asm.js only and for-in is not allowed in
valid asm.js, so we can just disable optimization for asm.js functions
that contain for-in loops. This way we only need to support for-in via
the BytecodeGraphBuilder in TurboFan now, which will make optimizations
way easier.
R=yangguo@chromium.org
Review-Url: https://codereview.chromium.org/2679913004
Cr-Commit-Position: refs/heads/master@{#43024}
Reason for revert:
False alarm, bot hiccup
Original issue's description:
> Revert of Reland: [Parse] ParseInfo owns the parsing Zone. (patchset #7 id:140001 of https://codereview.chromium.org/2632123006/ )
>
> Reason for revert:
> Speculative revert because of revert needed for https://codereview.chromium.org/2632123006
>
> Original issue's description:
> > Reland: [Parse] ParseInfo owns the parsing Zone.
> >
> > Moves ownership of the parsing Zone to ParseInfo with a shared_ptr. This is
> > in preperation for enabling background compilation jobs for inner functions
> > share the AST in the outer-function's parse zone memory (read-only), with the
> > and zone being released when all compilation jobs have completed.
> >
> > BUG=v8:5203,v8:5215
> >
> > Review-Url: https://codereview.chromium.org/2632123006
> > Cr-Original-Commit-Position: refs/heads/master@{#42993}
> > Committed: 14fb337200
> > Review-Url: https://codereview.chromium.org/2632123006
> > Cr-Commit-Position: refs/heads/master@{#42996}
> > Committed: 9e7d5a6065
>
> TBR=marja@chromium.org,mstarzinger@chromium.org,ahaas@chromium.org,verwaest@chromium.org,rmcilroy@chromium.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=v8:5203,v8:5215
>
> Review-Url: https://codereview.chromium.org/2683733002
> Cr-Commit-Position: refs/heads/master@{#43008}
> Committed: 9fe08ec067TBR=marja@chromium.org,mstarzinger@chromium.org,ahaas@chromium.org,verwaest@chromium.org,rmcilroy@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5203,v8:5215
Review-Url: https://codereview.chromium.org/2679303003
Cr-Commit-Position: refs/heads/master@{#43015}
Reason for revert:
Speculative revert because of revert needed for https://codereview.chromium.org/2632123006
Original issue's description:
> Reland: [Parse] ParseInfo owns the parsing Zone.
>
> Moves ownership of the parsing Zone to ParseInfo with a shared_ptr. This is
> in preperation for enabling background compilation jobs for inner functions
> share the AST in the outer-function's parse zone memory (read-only), with the
> and zone being released when all compilation jobs have completed.
>
> BUG=v8:5203,v8:5215
>
> Review-Url: https://codereview.chromium.org/2632123006
> Cr-Original-Commit-Position: refs/heads/master@{#42993}
> Committed: 14fb337200
> Review-Url: https://codereview.chromium.org/2632123006
> Cr-Commit-Position: refs/heads/master@{#42996}
> Committed: 9e7d5a6065TBR=marja@chromium.org,mstarzinger@chromium.org,ahaas@chromium.org,verwaest@chromium.org,rmcilroy@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5203,v8:5215
Review-Url: https://codereview.chromium.org/2683733002
Cr-Commit-Position: refs/heads/master@{#43008}
... and TypeFeedbackMetadata to FeedbackMetadata.
BUG=
Change-Id: I2556d1c2a8f37b8cf3d532cc98d973b6dc7e9e6c
Reviewed-on: https://chromium-review.googlesource.com/439244
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Michael Stanton <mvstanton@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Hannes Payer <hpayer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#42999}
Moves ownership of the parsing Zone to ParseInfo with a shared_ptr. This is
in preperation for enabling background compilation jobs for inner functions
share the AST in the outer-function's parse zone memory (read-only), with the
and zone being released when all compilation jobs have completed.
BUG=v8:5203,v8:5215
Review-Url: https://codereview.chromium.org/2632123006
Cr-Original-Commit-Position: refs/heads/master@{#42993}
Committed: 14fb337200
Review-Url: https://codereview.chromium.org/2632123006
Cr-Commit-Position: refs/heads/master@{#42996}
Reason for revert:
doesn't compile on ToT
Original issue's description:
> Reland: [Parse] ParseInfo owns the parsing Zone.
>
> Moves ownership of the parsing Zone to ParseInfo with a shared_ptr. This is
> in preperation for enabling background compilation jobs for inner functions
> share the AST in the outer-function's parse zone memory (read-only), with the
> and zone being released when all compilation jobs have completed.
>
> BUG=v8:5203,v8:5215
>
> Review-Url: https://codereview.chromium.org/2632123006
> Cr-Commit-Position: refs/heads/master@{#42993}
> Committed: 14fb337200TBR=marja@chromium.org,mstarzinger@chromium.org,ahaas@chromium.org,verwaest@chromium.org,rmcilroy@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5203,v8:5215
Review-Url: https://codereview.chromium.org/2685543003
Cr-Commit-Position: refs/heads/master@{#42994}
Moves ownership of the parsing Zone to ParseInfo with a shared_ptr. This is
in preperation for enabling background compilation jobs for inner functions
share the AST in the outer-function's parse zone memory (read-only), with the
and zone being released when all compilation jobs have completed.
BUG=v8:5203,v8:5215
Review-Url: https://codereview.chromium.org/2632123006
Cr-Commit-Position: refs/heads/master@{#42993}
According to the WebAssembly spec no arithmetic operation should ever
return a signalling NaN. With the constant folding in V8, however, it
was possible that some arithmetic operations were elided, and if the
input of the arithmetic operation was a signalling NaN, then also the
result was the same signalling NaN. This CL removes some constant
folding optimizations and adjusts others so that even with constant
folding the result of an arithmetic operation is never a signalling NaN.
R=titzer@chromium.org, rossberg@chromium.org, bmeurer@chromium.org
Review-Url: https://codereview.chromium.org/2647353007
Cr-Commit-Position: refs/heads/master@{#42694}
Speculative reason for issue 684481.
BUG=chromium:684481
TBR=marja@chromium.org,mstarzinger@chromium.org,ahaas@chromium.org,verwaest@chromium.org,
Original issue's description:
> [Parse] ParseInfo owns the parsing Zone.
>
> Moves ownership of the parsing Zone to ParseInfo with a shared_ptr. This is
> in preperation for enabling background compilation jobs for inner functions
> share the AST in the outer-function's parse zone memory (read-only), with the
> and zone being released when all compilation jobs have completed.
>
> BUG=v8:5203, v8:5215
> Review-Url: https://codereview.chromium.org/2632123006
> Cr-Commit-Position: refs/heads/master@{#42562}
> Committed: 4b0101d369
Review-Url: https://codereview.chromium.org/2648383005
Cr-Commit-Position: refs/heads/master@{#42633}
Moves ownership of the parsing Zone to ParseInfo with a shared_ptr. This is
in preperation for enabling background compilation jobs for inner functions
share the AST in the outer-function's parse zone memory (read-only), with the
and zone being released when all compilation jobs have completed.
BUG=v8:5203,v8:5215
Review-Url: https://codereview.chromium.org/2632123006
Cr-Original-Commit-Position: refs/heads/master@{#42539}
Committed: 839b06b64f
Review-Url: https://codereview.chromium.org/2632123006
Cr-Commit-Position: refs/heads/master@{#42562}
Reason for revert:
Crashes on Windows in:
CompilerDispatcherJobTest.CompileFailureToFinalize
CompilerDispatcherJobTest.ScopeChain
Original issue's description:
> [Parse] ParseInfo owns the parsing Zone.
>
> Moves ownership of the parsing Zone to ParseInfo with a shared_ptr. This is
> in preperation for enabling background compilation jobs for inner functions
> share the AST in the outer-function's parse zone memory (read-only), with the
> and zone being released when all compilation jobs have completed.
>
> BUG=v8:5203,v8:5215
>
> Review-Url: https://codereview.chromium.org/2632123006
> Cr-Commit-Position: refs/heads/master@{#42539}
> Committed: 839b06b64fTBR=marja@chromium.org,mstarzinger@chromium.org,ahaas@chromium.org,verwaest@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5203,v8:5215
Review-Url: https://codereview.chromium.org/2645613008
Cr-Commit-Position: refs/heads/master@{#42542}
Moves ownership of the parsing Zone to ParseInfo with a shared_ptr. This is
in preperation for enabling background compilation jobs for inner functions
share the AST in the outer-function's parse zone memory (read-only), with the
and zone being released when all compilation jobs have completed.
BUG=v8:5203,v8:5215
Review-Url: https://codereview.chromium.org/2632123006
Cr-Commit-Position: refs/heads/master@{#42539}
Since the script origin is part of the key used in the compilation
cache, this ensures that the cache never confuses a module with a
non-module script.
BUG=v8:1569,v8:5685
Review-Url: https://codereview.chromium.org/2611643002
Cr-Commit-Position: refs/heads/master@{#42490}
With this CL, context loads and stores are "strengthened" by reducing
the incoming context chain and decreasing the depth accordingly,
whenever possible. This enables more opportunities for specialization
and will let us easily add module context specialization later.
BUG=
Review-Url: https://codereview.chromium.org/2559173003
Cr-Commit-Position: refs/heads/master@{#42334}
- Refactor Dispatch tables to have separate function, signature tables
- New Relocation type for WasmFunctionTableReference, assembler, compiler support.
- RelocInfo helper functions for Wasm references
Review-Url: https://codereview.chromium.org/2627543003
Cr-Commit-Position: refs/heads/master@{#42192}
Downside: this adds all kinds of weird includes in the .cc files.
(See design doc linked in the bug.)
BUG=v8:5402
Review-Url: https://codereview.chromium.org/2622503002
Cr-Commit-Position: refs/heads/master@{#42140}
Add a more efficient encoding for state values that have a large number of
optimized-out inputs.
Review-Url: https://codereview.chromium.org/2509623002
Cr-Commit-Position: refs/heads/master@{#42088}
Reason for revert:
speculative revert: https://codereview.chromium.org/2596013002/
Original issue's description:
> [regexp] Remove IsRegExp intrinsic
>
> The two remaining uses of this intrinsic in debug.js and mirrors.js now
> simply rely on the runtime function.
>
> BUG=v8:5339
>
> Review-Url: https://codereview.chromium.org/2591923003
> Cr-Commit-Position: refs/heads/master@{#41892}
> Committed: c9cb94a06fTBR=bmeurer@chromium.org,jgruber@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5339
Review-Url: https://codereview.chromium.org/2592383002
Cr-Commit-Position: refs/heads/master@{#41915}
The two remaining uses of this intrinsic in debug.js and mirrors.js now
simply rely on the runtime function.
BUG=v8:5339
Review-Url: https://codereview.chromium.org/2591923003
Cr-Commit-Position: refs/heads/master@{#41892}
Introduces:
- a new AST node representing the GetIterator() algorithm in the specification, to be used by ForOfStatement, YieldExpression (in the case of delegating yield*), and the future `for-await-of` loop proposed in http://tc39.github.io/proposal-async-iteration/#sec-async-iterator-value-unwrap-functions.
- a new opcode (JumpIfJSReceiver), which is useful for `if Type(object) is not Object` checks which are common throughout the specification. This node is easily eliminated by TurboFan.
The AST node is desugared specially in bytecode, rather than manually when building the AST. The benefit of this is that desugaring in the BytecodeGenerator is much simpler and easier to understand than desugaring the AST.
This also reduces parse time very slightly, and allows us to use LoadIC rather than KeyedLoadIC, which seems to have better baseline performance. This results in a ~20% improvement in test/js-perf-test/Iterators micro-benchmarks, which I believe owes to the use of the slightly faster LoadIC as opposed to the KeyedLoadIC in the baseline case. Both produce identical optimized code via TurboFan when the type check can be eliminated, and the load can be replaced with a constant value.
BUG=v8:4280
R=bmeurer@chromium.org, rmcilroy@chromium.org, adamk@chromium.org, neis@chromium.org, jarin@chromium.orgTBR=rossberg@chromium.org
Review-Url: https://codereview.chromium.org/2557593004
Cr-Commit-Position: refs/heads/master@{#41555}
This allows us to forward declare Label and Variable classes without including the
code-assembler.h.
BUG=
Review-Url: https://codereview.chromium.org/2551163003
Cr-Commit-Position: refs/heads/master@{#41509}
Don't unconditionally assume that Tagged->Word32 changes are always
truncating independent of the type of the input. Work-around the
remaining issues with for-in by properly renaming the index if it's
not already of appropriate type (happens with generators or OSR).
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/2545393002
Cr-Commit-Position: refs/heads/master@{#41484}
JS operators always have an implicit context input, so just use that instead.
BUG=
Review-Url: https://codereview.chromium.org/2541813002
Cr-Commit-Position: refs/heads/master@{#41392}
The deprecated pipeline is used for asm.js only, where we forcibly
disable inlining anyways (for performance reasons), so inlining via
the AstGraphBuilder is essentially dead code by now, thus there's no
point in trying to keep that around in the code base.
Also nuke the test-run-inlining.cc file, which would require some heavy
surgery (for probably little benefit), and move the useful tests for
mjsunit tests instead.
BUG=v8:2206,v8:5657
R=yangguo@chromium.org
Review-Url: https://codereview.chromium.org/2527053002
Cr-Commit-Position: refs/heads/master@{#41245}
This is in preparation for introducing more specialized
CodeStubAssembler subclasses. The state object can be handed
around, while the Assembler instances are temporary-scoped.
BUG=v8:5628
Original review: https://codereview.chromium.org/2498073002/
Review-Url: https://codereview.chromium.org/2502293002
Cr-Commit-Position: refs/heads/master@{#41028}
Reason for revert:
https://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20shared doesn't want to compile. Missing export annotation?
Original issue's description:
> [refactoring] Split CodeAssemblerState out of CodeAssembler
>
> This is in preparation for introducing more specialized
> CodeStubAssembler subclasses. The state object can be handed
> around, while the Assembler instances are temporary-scoped.
>
> BUG=v8:5628
TBR=ishell@chromium.org,mstarzinger@chromium.org,jkummerow@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5628
Review-Url: https://codereview.chromium.org/2504913002
Cr-Commit-Position: refs/heads/master@{#41018}
This is in preparation for introducing more specialized
CodeStubAssembler subclasses. The state object can be handed
around, while the Assembler instances are temporary-scoped.
BUG=v8:5628
Review-Url: https://codereview.chromium.org/2498073002
Cr-Commit-Position: refs/heads/master@{#41015}
SourcePosition::InliningId() refers to a the new table DeoptimizationInputData::InliningPositions(), which provides the following data for every inlining id:
- The inlined SharedFunctionInfo as an offset into DeoptimizationInfo::LiteralArray
- The SourcePosition of the inlining. Recursively, this yields the full inlining stack.
Before the Code object is created, the same information can be found in CompilationInfo::inlined_functions().
If SourcePosition::InliningId() is SourcePosition::kNotInlined, it refers to the outer (non-inlined) function.
So every SourcePosition has full information about its inlining stack, as long as the corresponding Code object is known. The internal represenation of a source position is a positive 64bit integer.
All compilers create now appropriate source positions for inlined functions. In the case of Turbofan, this required using AstGraphBuilderWithPositions for inlined functions too. So this class is now moved to a header file.
At the moment, the additional information in source positions is only used in --trace-deopt and --code-comments. The profiler needs to be updated, at the moment it gets the correct script offsets from the deopt info, but the wrong script id from the reconstructed deopt stack, which can lead to wrong outputs. This should be resolved by making the profiler use the new inlining information for deopts.
I activated the inlined deoptimization tests in test-cpu-profiler.cc for Turbofan, changing them to a case where the deopt stack and the inlining position agree. It is currently still broken for other cases.
The following additional changes were necessary:
- The source position table (internal::SourcePositionTableBuilder etc.) supports now 64bit source positions. Encoding source positions in a single 64bit int together with the difference encoding in the source position table results in very little overhead for the inlining id, since only 12% of the source positions in Octane have a changed inlining id.
- The class HPositionInfo was effectively dead code and is now removed.
- SourcePosition has new printing and information facilities, including computing a full inlining stack.
- I had to rename compiler/source-position.{h,cc} to compiler/compiler-source-position-table.{h,cc} to avoid clashes with the new src/source-position.cc file.
- I wrote the new wrapper PodArray for ByteArray. It is a template working with any POD-type. This is used in DeoptimizationInputData::InliningPositions().
- I removed HInlinedFunctionInfo and HGraph::inlined_function_infos, because they were only used for the now obsolete Crankshaft inlining ids.
- Crankshaft managed a list of inlined functions in Lithium: LChunk::inlined_functions. This is an analog structure to CompilationInfo::inlined_functions. So I removed LChunk::inlined_functions and made Crankshaft use CompilationInfo::inlined_functions instead, because this was necessary to register the offsets into the literal array in a uniform way. This is a safe change because LChunk::inlined_functions has no other uses and the functions in CompilationInfo::inlined_functions have a strictly longer lifespan, being created earlier (in Hydrogen already).
BUG=v8:5432
Review-Url: https://codereview.chromium.org/2451853002
Cr-Commit-Position: refs/heads/master@{#40975}
This adds a new ExternalPointer type, which is an Internal type that is
used for ExternalReferences and other pointer values, like the pointers
into the asm.js heap. It also adds a PointerConstant operator, which we
use to represents these raw constants (we can probably remove that
particular operator again once WebAssembly ships with the validator).
R=mvstanton@chromium.org
BUG=v8:5267,v8:5270
Review-Url: https://codereview.chromium.org/2494753003
Cr-Commit-Position: refs/heads/master@{#40923}
Drive-by-fix 1: be more precise in machine representations for
AllocateNameDictionary to make --turbo_verify_machine_graph happy.
Drive-by-fix 2: Improve graph verifier output by printing input
representation.
BUG=
Review-Url: https://codereview.chromium.org/2475913002
Cr-Commit-Position: refs/heads/master@{#40797}
With an instance of CodeStubArguments, builtin stub generators can generate code
that accesses the receiver passed to the builtin, as well as access and iterate
over the variable number of arguments that are passed in.
Review-Url: https://codereview.chromium.org/2469273003
Cr-Commit-Position: refs/heads/master@{#40726}
This is preparation for using TF to create builtins that handle variable number of
arguments and have to remove these arguments dynamically from the stack upon
return.
The gist of the changes:
- Added a second argument to the Return node which specifies the number of stack
slots to pop upon return in addition to those specified by the Linkage of the
compiled function.
- Removed Tail -> Non-Tail fallback in the instruction selector. Since TF now should
handles all tail-call cases except where the return value type differs, this fallback
was not really useful and in fact caused unexpected behavior with variable
sized argument popping, since it wasn't possible to materialize a Return node
with the right pop count from the TailCall without additional context.
- Modified existing Return generation to pass a constant zero as the additional
pop argument since the variable pop functionality
LOG=N
Review-Url: https://codereview.chromium.org/2446543002
Cr-Commit-Position: refs/heads/master@{#40699}
Reason for revert:
Seems to break arm64 sim debug and blocks roll:
https://build.chromium.org/p/client.v8.ports/builders/V8%20Linux%20-%20arm64%20-%20sim%20-%20debug/builds/3294
Original issue's description:
> [turbofan] Support variable size argument removal in TF-generated functions
>
> This is preparation for using TF to create builtins that handle variable number of
> arguments and have to remove these arguments dynamically from the stack upon
> return.
>
> The gist of the changes:
> - Added a second argument to the Return node which specifies the number of stack
> slots to pop upon return in addition to those specified by the Linkage of the
> compiled function.
> - Removed Tail -> Non-Tail fallback in the instruction selector. Since TF now should
> handles all tail-call cases except where the return value type differs, this fallback
> was not really useful and in fact caused unexpected behavior with variable
> sized argument popping, since it wasn't possible to materialize a Return node
> with the right pop count from the TailCall without additional context.
> - Modified existing Return generation to pass a constant zero as the additional
> pop argument since the variable pop functionality
>
> LOG=N
TBR=bmeurer@chromium.org,mstarzinger@chromium.org,epertoso@chromium.org,danno@chromium.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
NOPRESUBMIT=true
Review-Url: https://codereview.chromium.org/2473643002
Cr-Commit-Position: refs/heads/master@{#40691}
This is preparation for using TF to create builtins that handle variable number of
arguments and have to remove these arguments dynamically from the stack upon
return.
The gist of the changes:
- Added a second argument to the Return node which specifies the number of stack
slots to pop upon return in addition to those specified by the Linkage of the
compiled function.
- Removed Tail -> Non-Tail fallback in the instruction selector. Since TF now should
handles all tail-call cases except where the return value type differs, this fallback
was not really useful and in fact caused unexpected behavior with variable
sized argument popping, since it wasn't possible to materialize a Return node
with the right pop count from the TailCall without additional context.
- Modified existing Return generation to pass a constant zero as the additional
pop argument since the variable pop functionality
LOG=N
Review-Url: https://codereview.chromium.org/2446543002
Cr-Commit-Position: refs/heads/master@{#40678}
- Modifies RegisterConfiguration to specify complex aliasing on ARM 32.
- Modifies RegisterAllocator to consider aliasing.
- Modifies ParallelMove::PrepareInsertAfter to handle aliasing.
- Modifies GapResolver to split wider register moves when interference
with smaller moves is detected.
- Modifies MoveOptimizer to handle aliasing.
- Adds ARM 32 macro-assembler pseudo move instructions to handle cases where
split moves don't correspond to actual s-registers.
- Modifies CodeGenerator::AssembleMove and AssembleSwap to handle moves of
different widths, and moves involving pseudo-s-registers.
- Adds unit tests for FP operand interference checking and PrepareInsertAfter.
- Adds more tests of FP for the move optimizer and register allocator.
LOG=N
BUG=v8:4124
Review-Url: https://codereview.chromium.org/2410673002
Cr-Commit-Position: refs/heads/master@{#40597}
This adds more useful information to the v8-heap-stats tool.
BUG=v8:5489
Review-Url: https://codereview.chromium.org/2394213003
Cr-Commit-Position: refs/heads/master@{#40361}
The only way to get a minus zero result from subtraction is
(-0) - (+0) = -0, hence checking for minus zero on the RHS is
redundant. This is causing some unnecessary deoptimisations
in Box2D from Octane on 32-bit platforms.
BUG=
Review-Url: https://codereview.chromium.org/2410883003
Cr-Commit-Position: refs/heads/master@{#40207}
There were once plans to generate cross-context code with TurboFan,
however that doesn't fit into the model anymore, and so all of this
is essentially dead untested code (and thus most likely already broken
in subtle ways). With this mode still in place it would also be a lot
harder to make inlining based on SharedFunctionInfo work.
BUG=v8:2206,v8:5499
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/2406803002
Cr-Commit-Position: refs/heads/master@{#40109}
Reason for revert:
Needed to revert https://codereview.chromium.org/2400343002/
Original issue's description:
> [parser] Deprecate ParseInfo constructor taking closure.
>
> This removes the {ParseInfo} constructor consuming a closure, replacing
> all uses to pass only the shared function info. The goal is to make the
> fact that parsing is independent of a concrete closure explicit.
>
> R=jochen@chromium.org
> BUG=v8:2206
>
> Committed: https://crrev.com/3de42b3f224217ec88e4c609d3cf23fe06806dca
> Cr-Commit-Position: refs/heads/master@{#40083}
TBR=jochen@chromium.org,bmeurer@chromium.org,marja@chromium.org,yangguo@chromium.org,mstarzinger@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:2206
Review-Url: https://codereview.chromium.org/2406623002
Cr-Commit-Position: refs/heads/master@{#40097}
This removes the {ParseInfo} constructor consuming a closure, replacing
all uses to pass only the shared function info. The goal is to make the
fact that parsing is independent of a concrete closure explicit.
R=jochen@chromium.org
BUG=v8:2206
Review-Url: https://codereview.chromium.org/2396963003
Cr-Commit-Position: refs/heads/master@{#40083}
This enables the {BytecodeGraphBuilder} whenever heuristics in the
compilation pipeline determine both Ignition and TurboFan to be used.
There no longer needs to be an explicit flag passed in order to build
graphs from bytecode.
R=bmeurer@chromium.org
Review-Url: https://codereview.chromium.org/2363413005
Cr-Commit-Position: refs/heads/master@{#40045}
Fixes:
- Remove OsrGuards on frame specialization (for asm.js).
- Handle the rename in the walk for native context.
- Fix LoadContext effect wiring for Osr context chains.
Review-Url: https://codereview.chromium.org/2388303006
Cr-Commit-Position: refs/heads/master@{#40021}
Reason for revert:
Tanks the world.
Original issue's description:
> [turbofan] Osr value typing + dynamic type checks on entry.
>
> This introduces a new OsrGuard node that is inserted during graph building
> to guard the inferred type of the OSR value.
>
> The type of the OSR value is inferred by running the typer before OSR
> deconstruction, and then taking the type from the phi that takes the
> OSR value. After the deconstruction, we throw the types away.
>
> At the moment we only support the SignedSmall OSR type and we always
> pick the tagged representation. Later, we might want to support more
> types (such as Number) and pick better representations (int32/float64).
>
> This CL also removes the OSR deconstruction tests because they build
> unrealistic graph (no effect chain, no loop termination). I considered
> adding the effect chains to the tests, but this would make the tests
> even more brittle.
>
> Committed: https://crrev.com/1f5dc90a900d222da44bee3eff171a2ba1e3c076
> Cr-Commit-Position: refs/heads/master@{#39971}
TBR=bmeurer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review-Url: https://codereview.chromium.org/2395783002
Cr-Commit-Position: refs/heads/master@{#39985}
This introduces a new OsrGuard node that is inserted during graph building
to guard the inferred type of the OSR value.
The type of the OSR value is inferred by running the typer before OSR
deconstruction, and then taking the type from the phi that takes the
OSR value. After the deconstruction, we throw the types away.
At the moment we only support the SignedSmall OSR type and we always
pick the tagged representation. Later, we might want to support more
types (such as Number) and pick better representations (int32/float64).
This CL also removes the OSR deconstruction tests because they build
unrealistic graph (no effect chain, no loop termination). I considered
adding the effect chains to the tests, but this would make the tests
even more brittle.
Review-Url: https://codereview.chromium.org/2384113002
Cr-Commit-Position: refs/heads/master@{#39971}
- Changes tests to canonicalize FP slot/register moves, to simplify
testing any implementations that may fragment FP register moves.
- Adds code to generate correct ParallelMoves (e.g. no slot sources
of different reps overlapping.)
- Refactors test functions, so we can add manually generated tests
to current fuzzed tests.
- Adds SIMD operands, since these can be tested here now.
LOG=N
BUG=v8:4124
Review-Url: https://codereview.chromium.org/2365983002
Cr-Commit-Position: refs/heads/master@{#39943}
This is some initial cleanup to keep /src clean. The
AccountingAllocator is actually exclusively used by zones and this
common subfolder makes that more clear.
BUG=v8:5409
Review-Url: https://codereview.chromium.org/2344143003
Cr-Commit-Position: refs/heads/master@{#39558}
Adds a fast path for loading DYNAMIC_GLOBAL variables, which are lookup
variables that can be globally loaded, without calling the runtime, as long as
there was no context extension by a sloppy eval along their context chain.
BUG=v8:5263
Review-Url: https://codereview.chromium.org/2347143002
Cr-Commit-Position: refs/heads/master@{#39537}
Adds a fast path for loading DYNAMIC_LOCAL variables, which are lookup
variables that can be context loaded, without calling the runtime, as
long as there was no context extension by a sloppy eval along their
context chain.
BUG=v8:5263
Review-Url: https://codereview.chromium.org/2343633002
Cr-Commit-Position: refs/heads/master@{#39473}
Add a dedicated simplified operator to inline the general case for the
ToBoolean conversion. In a follow up CL we will also use the ToBoolean
hints gathered by the baseline compiler.
CQ_INCLUDE_TRYBOTS=master.tryserver.v8:v8_linux_arm64_gc_stress_dbg
R=jarin@chromium.org
BUG=v8:5267
Committed: https://crrev.com/8c50b51ab3d21efcd2f6900d83962159f21e1590
Review-Url: https://codereview.chromium.org/2167593002
Cr-Original-Commit-Position: refs/heads/master@{#37882}
Cr-Commit-Position: refs/heads/master@{#39420}
This makes for slightly faster rebuilds when touching parser-base.h
(which changes frequently!). Also takes care of an old TODO,
moving CompileTimeValue into its own file under ast/, where it
properly belongs.
BUG=v8:5294
Review-Url: https://codereview.chromium.org/2305883002
Cr-Commit-Position: refs/heads/master@{#39141}
Rebuilding (after touching certain files) is crazy slow because
includes are out of control. Many of these files we need to rebuild are
cctests which pull in more includes than they need.
BUG=v8:5294
Review-Url: https://codereview.chromium.org/2304553002
Cr-Commit-Position: refs/heads/master@{#39080}
Now that the hole NaN is no longer represented as Float64Constant early
on, we should never see such a constant node in any JS-level graph, but
we will only see them after representation selection. Change Typer and
SimplifiedLowering appropriately (and fix the invalid tests).
R=jarin@chromium.org
BUG=v8:5267
Review-Url: https://codereview.chromium.org/2299883003
Cr-Commit-Position: refs/heads/master@{#39063}
This way, many files which only need CompilationInfo but not compiler.h
and its dependencies can include just compilation-info.h.
BUG=
Review-Url: https://codereview.chromium.org/2284313003
Cr-Commit-Position: refs/heads/master@{#39038}
Drop the typing rules for the machine operators and replace them
with UNREACHABLE. These typing rules were never correct and there's
also no need to have those rules at all.
Drive-by-fix: Remove the extremely annoying test-simplified-lowering.cc
file, which is not very useful, but consumes a large amount of time to
keep it compiling and passing. Instead we should introduce appropriate
tests for the SimplifiedLowering that also test something meaningful
w/o just cementing the implementation.
R=jarin@chromium.org
BUG=v8:5267
Review-Url: https://codereview.chromium.org/2292463002
Cr-Commit-Position: refs/heads/master@{#38970}
Rebuilding (after touching certain files) is crazy slow because
includes are out of control. Many of these files we need to rebuild are
cctests which pull in more includes than they need.
BUG=v8:5294
Review-Url: https://codereview.chromium.org/2278103002
Cr-Commit-Position: refs/heads/master@{#38933}
Reason for revert:
Octane/Mandreel aborts with an exception now:
TypeError: __FUNCTION_TABLE__[(r2 >> 2)] is not a function
Original issue's description:
> [turbofan] Insert dummy values when changing from None type.
>
> Currently we choose the MachineRepresentation::kNone representation for
> values of Type::None, and when converting values from the kNone representation
> we use "impossible" conversions that will crash at runtime. This
> assumes that the impossible conversions should never be hit (the only
> way to produce the impossible values is to perform an always-failing
> runtime check on a value, such as Smi-checking a string). Note that
> this assumes that the runtime check is executed before the impossible
> convesrion.
>
> Introducing BitwiseOr type feedback broke this in two ways:
>
> - we always pick Word32 representation for bitwise-or, so the
> impossible conversion does not trigger (it only triggers with
> None representation), and we could end up with unsupported
> conversions from Word32.
>
> - even if we inserted impossible conversions, they are pure conversions.
> Since untagging, bitwise-or operations are also pure, we could hoist
> all these before the smi check of the inputs and we could hit the
> impossible conversions before we get to the smi check.
>
> This CL addresses this by just providing dummy values for conversions
> from the Type::None type. It also removes the impossible-to-* conversions.
>
> BUG=chromium:638132
>
> Committed: https://crrev.com/c83b21ab755f1420b6da85b3ff43d7e96ead9bbe
> Cr-Commit-Position: refs/heads/master@{#38883}
TBR=mstarzinger@chromium.org,jarin@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:638132
Review-Url: https://codereview.chromium.org/2280613002
Cr-Commit-Position: refs/heads/master@{#38893}
Currently we choose the MachineRepresentation::kNone representation for
values of Type::None, and when converting values from the kNone representation
we use "impossible" conversions that will crash at runtime. This
assumes that the impossible conversions should never be hit (the only
way to produce the impossible values is to perform an always-failing
runtime check on a value, such as Smi-checking a string). Note that
this assumes that the runtime check is executed before the impossible
convesrion.
Introducing BitwiseOr type feedback broke this in two ways:
- we always pick Word32 representation for bitwise-or, so the
impossible conversion does not trigger (it only triggers with
None representation), and we could end up with unsupported
conversions from Word32.
- even if we inserted impossible conversions, they are pure conversions.
Since untagging, bitwise-or operations are also pure, we could hoist
all these before the smi check of the inputs and we could hit the
impossible conversions before we get to the smi check.
This CL addresses this by just providing dummy values for conversions
from the Type::None type. It also removes the impossible-to-* conversions.
BUG=chromium:638132
Review-Url: https://codereview.chromium.org/2266823002
Cr-Commit-Position: refs/heads/master@{#38883}
Rebuilding (after touching certain files) is crazy slow because
includes are out of control.
Fixing it:
- Don't include stuff in headers unless necessary.
- Include the stuff you need, not some other stuff that happens to include the
stuff you need.
BUG=v8:5294
Review-Url: https://codereview.chromium.org/2268303002
Cr-Commit-Position: refs/heads/master@{#38818}
This makes us able to get rid of dependencies to parser.h from places
which only need the ParseInfo, and also gets rid of the curious Parser
<-> Compiler circular dependency.
Also IWYUd where necessary.
BUG=
Review-Url: https://codereview.chromium.org/2268513002
Cr-Commit-Position: refs/heads/master@{#38777}
Changes the control flow builder classes to make use of the
BytecodeLabels helper class.
BUG=v8:4280
LOG=n
Review-Url: https://codereview.chromium.org/2254493002
Cr-Commit-Position: refs/heads/master@{#38744}
This removes some compiler internals as well as some JavaScript specific
helper from the CodeAssembler, by either hiding or moving the support
into the CodeStubAssembler.
R=bmeurer@chromium.org
Review-Url: https://codereview.chromium.org/2246463002
Cr-Commit-Position: refs/heads/master@{#38617}
Up until now "-0.0 - x" was lowered in the instruction selector. I moved
the lowering now to the MachineOperatorReducer.
I did not remove the lowering from the instruction selector yet, I would
prefer to do that in a separate CL.
R=bmeurer@chromium.org
Review-Url: https://codereview.chromium.org/2226663002
Cr-Commit-Position: refs/heads/master@{#38417}
This also gets rid of the pending_error_handler field on DeclarationScope which wasn't actually used.
BUG=v8:5209
Review-Url: https://codereview.chromium.org/2218083002
Cr-Commit-Position: refs/heads/master@{#38400}
