1. Instead of checking upfront and estimating a limit for the number, we
now are able to stop register allocation and bailout when we don't
have enough virtual registers.
2. GCed some out-dated flags from flag-definition.h
3. Simplified the interface from the Lithium builder to the
register allocator in lithium-*.cc: For uses and definitions, we
just record the virtual register number given by the Hydrogen value id.
For temporaries, we request a new virtual register from the allocator.
For fixed temps, we don't need to do anything.
4. Increased number of deoptimization entries to 16K. Eventually we
probably want to make this array grow dynamically.
Review URL: https://chromiumcodereview.appspot.com/9325019
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10597 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The ES.next draft rev 4 in section 11.13 reads:
It is a Syntax Error if the AssignmentExpression is contained in extended code
and the LeftHandSideExpression is an Identifier that does not statically resolve
to a declarative environment record binding or if the resolved binding is an
immutable binding.
This CL adds corresponding static checks for the immutable binding case.
TEST=mjsunit/harmony/block-const-assign
Review URL: http://codereview.chromium.org/8688007
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10156 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This CL introduces a third mode next to the non-strict
(henceforth called 'classic mode') and 'strict mode'
which is called 'extended mode' as in the current
ES.next specification drafts. The extended mode is based on
the 'strict mode' and adds new functionality to it. This
means that most of the semantics of these two modes
coincide.
The 'extended mode' is entered instead of the 'strict mode'
during parsing when using the 'strict mode' directive
"use strict" and when the the harmony-scoping flag is
active. This should be changed once it is fully specified how the 'extended mode' is entered.
This change introduces a new 3 valued enum LanguageMode
(see globals.h) corresponding to the modes which is mostly
used by the frontend code. This includes the following
components:
* (Pre)Parser
* Compiler
* SharedFunctionInfo, Scope and ScopeInfo
* runtime functions: StoreContextSlot,
ResolvePossiblyDirectEval, InitializeVarGlobal,
DeclareGlobals
The old enum StrictModeFlag is still used in the backend
when the distinction between the 'strict mode' and the 'extended mode' does not matter. This includes:
* SetProperty runtime function, Delete builtin
* StoreIC and KeyedStoreIC
* StubCache
Review URL: http://codereview.chromium.org/8417035
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10062 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
So far free variables references in eval code are not statically
resolved. For example in
function foo() { var x = 1; eval("y = x"); }
the variable x will get mode DYNAMIC and y will get mode DYNAMIC_GLOBAL,
i.e. free variable references trigger dynamic lookups with a fast case
handling for global variables.
The CL introduces static resolution of free variables references in eval
code. If possible variable references are resolved to bindings belonging to
outer scopes of the eval call site.
This is achieved by deserializing the outer scope chain using
Scope::DeserializeScopeChain prior to parsing the eval code similar to lazy
parsing of functions. The existing code for variable resolution is used,
however resolution starts at the first outer unresolved scope instead of
always starting at the root of the scope tree.
This is a prerequisite for statically checking validity of assignments in
the extended code as specified by the current ES.next draft which will be
introduced by a subsequent CL. More specifically section 11.13 of revision 4
of the ES.next draft reads:
* It is a Syntax Error if the AssignmentExpression is contained in extended
code and the LeftHandSideExpression is an Identifier that does not
statically resolve to a declarative environment record binding or if the
resolved binding is an immutable binding.
TEST=existing tests in mjsunit
Review URL: http://codereview.chromium.org/8508052
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@9999 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
* Remove a couple of unused fields from the FunctionLiteral, ensure that all
the bools are packed.
* Rename SaveScope and LexicalScope in the parser.
* Use an enum to generate the numbers 0..N and the dependent count, rather
than static const ints. This is simpler to extend (coming in a future
change).
R=danno@chromium.org,keuchel@chromium.org
BUG=
TEST=
Review URL: http://codereview.chromium.org/8505012
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@9933 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This is reapplying r9501 with this single change which seemed to be causing most (all) of the failures for r9501.
--- a/src/debug.cc
+++ b/src/debug.cc
@@ -2230,6 +2230,7 @@ Debugger::Debugger(Isolate* isolate)
compiling_natives_(false),
is_loading_debugger_(false),
never_unload_debugger_(false),
+ force_debugger_active_(true),
message_handler_(NULL),
debugger_unload_pending_(false),
host_dispatch_handler_(NULL),
R=kmillikin@chromium.org
BUG=
TEST=
Review URL: http://codereview.chromium.org//8337009
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@9684 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Previously the preparser always accepted natives syntax and let the
real parser throw the syntax error. In ES5, it should be an early error,
so the preparser must catch the error.
The perparser library does not expose parsing for natives syntax, it's
only used internally.
Review URL: http://codereview.chromium.org/8306024
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@9660 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This change will ensure that full code with debug break slots is compiled and activated for all functions which already have activation frames.
This additional handling is only for functions which have activations on the stack, and that activation is of the full code compiled without debug break slots. In that case the full code is recompiled with debug break slots. It is ensured that the full code is compiled generating the exact same instructions - except for the additional debug break slots - as before. The return address on the stack is then patched to continue execution in the new code.
Also fixed SortedListBSearch to actually use the passed comparision function.
R=svenpanne@chromium.org, kmillikin@chromium.org
BUG=
TEST=
Review URL: http://codereview.chromium.org//8050010
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@9489 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
When creating a CompilationInfo we always have the script and can
determine if it is a natives script.
Now that all natives functions are recognized as such, many of them
are called with undefined as the receiver. We have to use different
filtering for builtins functions when printing stack traces.
Also, fixed one call of CALL_NON_FUNCTION to be correctly marked as a
method call (with fixed receiver). Now that CALL_NON_FUNCTION is
marked as a native function this caused the receiver to be undefined.
R=svenpanne@chromium.org
BUG=
TEST=
Review URL: http://codereview.chromium.org/7395030
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@8680 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Generate Mach-O in-memory objects for OSX. Dump locals and parameters
for non-optimized frames.
Unfortunately, it seems like more-recent-GDB on OSX there is a little
temperamental (eg, the version from macports will be missing symbols
from gdb-integration_g when the version included in xcode will not--
and this is with --gdbjit off).
Includes some Python scripts to make dealing with V8 values in gdb more
pleasant.
Patch by Luke Zarko.
Review URL: http://codereview.chromium.org/6995161
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@8483 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Lots of web pages have really frequently firing timers that keep the
profiler thread spinning if we require a period of JS inactivity
before suspending the profiler. While it's possible to throttle it by
increasing the sleep delay and adjusting the duration of the required
inactive period, it seemed much simpler to just stop it immediately on
exiting JS.
Stopping the profiler this way effectively turned off two optimization
heuristics: 1) eager optimization (it's reset on waking up the
profiler and now the profiler wakes up much more frequently) and 2)
optimization throttling based on JS to non-JS state ratio (the ratio
is now 100%). I removed these two heuristics and found no performance
regressions so far.
R=ager@chromium.org
BUG=crbug.com/77625
TEST=none
Review URL: http://codereview.chromium.org/7274024
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@8472 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Optimized frames are now handled by the debugger. When discovering optimized frames during stack inspection in the debugger they are "deoptimized" using the normal deoptimization code and the deoptimizer output information is used to provide frame information to the debugger.
Before this change the debugger reported each optimized frame as one frame no matter the number of inlined functuions that might have been called inside of it. Also all locals where reported as undefined. Locals can still be reposted as undefined when their value is not "known" by the optimized frame.
As the structures used to calculate the output frames when deoptimizing are not GC safe the information for the debugger is copied to another structure (DeoptimizedFrameInfo) which is registered with the global deoptimizer data and processed during GC.
R=fschneider@chromium.org
BUG=v8:1140
TEST=test/mjsunit/debug-evaluate-locals-optimized*
Review URL: http://codereview.chromium.org//7230045
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@8464 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Only IA32 version for now. I'll start porting.
Strict mode functions are to get 'undefined' as the receiver when
called with an implicit receiver. Modes are bad! It forces us to have
checks on all function calls.
This change attempts to limit the cost by passing information about
whether or not a call is with an implicit or explicit receiver in ecx
as part of the calling convention. The cost is setting ecx on all
calls and checking ecx on entry to strict mode functions.
Implicit/explicit receiver state has to be maintained by ICs. Various
stubs have to not clobber ecx or save and restore it.
CallFunction stub needs to check if the receiver is implicit when it
doesn't know from the context.
Review URL: http://codereview.chromium.org/7039036
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@8040 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
- mutual inlining strict and non-strict functions in crankshaft.
- assignment to undefined variable with eval in scope.
- propagation of strict mode through lazy compilation.
BUG=
TEST=test/mjsunit/strict-mode.js test/mjsunit/strict-mode-opt.js
Review URL: http://codereview.chromium.org/6814012
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@7561 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
While trying to fix Mac and Windows versions for this change:
http://codereview.chromium.org/6771047/, I figured out, that we
already store an isolate in StackFrameIterator, so we can use it in
frame objects, instead of requiring it from caller.
I've changed iterators usage to the following scheme: whenever a
caller maintains an isolate pointer, it just passes it to stack
iterator, and no more worries about passing it to frame content
accessors. If a caller uses current isolate, it can omit passing it
to iterator, in this case, an iterator will use the current isolate,
too.
There was a special case with LiveEdit, which creates
detached copies of frame objects.
R=vitalyr@chromium.org
BUG=none
TEST=none
Review URL: http://codereview.chromium.org/6794019
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@7499 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Crankshaft is now the default on all platforms. This is the first
patch on the way to removing the classic code generator from the
system.
This time with no removal of the crankshaft flag. --nocrankshaft is
not at all the same as --always-full-compiler which I had used instead
for testing. That was what caused timeouts on the buildbots because of
repeated attempts to optimize hot functions. It makes sense to keep
the crankshaft flag in case you want to run only with the full
compiler and with no adaptive compilation.
R=vitalyr@chromium.org
Review URL: http://codereview.chromium.org/6759070
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@7486 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Because we might throw away code when doing code flushing we need to
set the optimizable flag to false in CompileLaze if this has been set
on the shared function info. This is the only place where this can
happen, since we always exchange the code with the laze compile stub
when doing code flushing.
The comment in AbortAndDisable actually states that this is already
the case (and that comment should now be ok).
Review URL: http://codereview.chromium.org/6685044
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@7378 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Change the way we construct the graph for polymorphic loads to match that of
polymorphic stores.
Introduce a stack-allocated helper for saving and restoring all the
function-specific graph builder state that needs to change when we begin
translating an inlined function. Make this class authoritative by moving
redundant state out of the builder and deferring to the current function's
state.
Ensure that we always print a tracing message when abandoning an inlining
attempt.
Review URL: http://codereview.chromium.org/6628012
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@7074 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The main issue was due to multiple recompilations of functions. Now
code objects are grouped by function using SFI object address.
JSFunction objects are no longer tracked, instead we track SFI object
moves. To pick a correct code version, we now sample return addresses
instead of JSFunction addresses.
tools/{linux|mac|windows}-tickprocessor scripts differentiate
between code optimization states for the same function
(using * and ~ prefixes introduced earlier).
DevTools CPU profiler treats all variants of function code as
a single function.
ll_prof treats each optimized variant as a separate entry, because
it can disassemble each one of them.
tickprocessor.py not updated -- it is deprecated and will be removed.
BUG=v8/1087,b/3178160
TEST=all existing tests pass, including Chromium layout tests
Review URL: http://codereview.chromium.org/6551011
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@6902 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Change more functions used by the Compiler class to have a uniform
interface: they get passed as argument an input/output pointer to a
CompilationInfo that they mutate if they succeed, and they return a
flag telling whether they succeeded.
Also, remove some unnecessary timers.
Review URL: http://codereview.chromium.org/3561012
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5583 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The plan is to use the CompilationInfo class to communicate inputs and
outputs to compilation pipeline phases, which each return a boolean
success/failure flag.
The intent is to make it easier to compose small pieces of the
pipeline without having to grow a custom function each time, each
taking a half dozen arguments.
This change modifies the very front end (the parser).
Review URL: http://codereview.chromium.org/3586006
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5581 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The lazy parsing functions took a host of arguments that can all be
derived from the SharedFunctionInfo, and the SharedFunctionInfo is
always available when parsing lazily. Change the interface to take a
single CompilationInfo or SharedFunctionInfo argument.
Also remove a flag in the parser that was always false when it was read.
Review URL: http://codereview.chromium.org/3538005
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5561 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
It was a wart that we had three handle fields, exactly one of which
was non-null; and that we had three overloaded constructors. Instead,
introduce subclasses and virtual methods.
Remove some unused fields from class CompilationInfo.
Review URL: http://codereview.chromium.org/3566003
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5560 ce2b1a6d-e550-0410-aec6-3dcde31c8c00