With this CL the out-of-line code of TrapIf will call a builtin instead
of doing a direct runtime call, which is cheaper. In the best case, the
out-of-line code now consists of a single call instruction. The builtin
will load the trapID and then call the runtime to throw a trap.
R=titzer@chromium.org, clemensh@chromium.org
Change-Id: I8a75ba09f40236a3d5cbdc17c1317baf0a3c915a
Reviewed-on: https://chromium-review.googlesource.com/445937
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43366}
In order to use the IdentityMap in the CompilerDispatcher the following
support is added:
- Support for deleting entries
- Support for iterating through the entries.
- Support for AllocationPolicy to enable non-zone allocation of backing
stores.
- Also refactors the code a bit.
BUG=v8:5203
Change-Id: I8b616cba8ae9dc22a7f4d76070fbb318c4edc80d
Reviewed-on: https://chromium-review.googlesource.com/444409
Reviewed-by: Ben Titzer <titzer@chromium.org>
Reviewed-by: Jochen Eisinger <jochen@chromium.org>
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43362}
v8 allows the embedder to specify a global template to use when
creating a new context. However, v8 does not use the supplied
template directly when creating the global proxy: it creates a
unique template for each global proxy. However, this is problematic
for remote contexts: functions cannot use strict receiver checks
with the remote context, as the global template will never match
the global proxy.
To fix this, remote contexts now also include a remote global
object in the prototype chain that is instantiated with the global
template. This mirrors the way the global proxy is configured for a
full v8 context, and allows strict receiver checks to work.
BUG=527190
Review-Url: https://codereview.chromium.org/2677653002
Cr-Commit-Position: refs/heads/master@{#43361}
This is a speculative fix, but I believe it might work.
Idea is to keep `start_from` as a double while establishing an appropriate
index to begin iteration. This should keep -Infinity intact rather than
converting it to a positive high value, which would break the algorithm.
This is similar to what had been implemented on the fast path before it was
changed to send non-Smis to the slow path.
BUG=v8:5986
R=bmeurer@chromium.org, cbruni@chromium.org, machenbach@chromium.org, adamk@chromium.org
Change-Id: I9965fd2e75a8972f3f1c7a18e51bd580030a66ea
Reviewed-on: https://chromium-review.googlesource.com/445857
Commit-Queue: Caitlin Potter <caitp@igalia.com>
Reviewed-by: Adam Klein <adamk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43358}
Test the wasm interpreter entry stub by creating two wasm functions A
and B, make A pass arguments to B, then redirect B to be executed in the
interpreter.
Test different number and types or arguments.
BUG=v8:5822
R=titzer@chromium.org
Review-Url: https://codereview.chromium.org/2651793003
Cr-Commit-Position: refs/heads/master@{#43353}
Native resources allocated by v8, as internal implementation detail,
and held by a Foreign object, must be released when the Isolate is
torn down. Example: wasm::WasmModule allocated by wasm compile, and
held throughout the lifetime of the WebAssembly.Module object.
This change:
- Extends Managed<CppType> with a mechanism for doing just that
- Separates the role of Managed<CppType> to be strictly an owner of
the lifetime of the native resource. For cases where that's not
desirable, we can polymorphically use Foregin.
- moves managed.h out of wasm, since it's not wasm-specific.
BUG=680065
Review-Url: https://codereview.chromium.org/2676513008
Cr-Commit-Position: refs/heads/master@{#43350}
- Adds new machine types SimdBool4/8/16 for the different boolean vector types.
- Adds a kSimdMaskRegisters flag for each platform. These are all false for now.
- Removes Create, ExtractLane, ReplaceLane, Equal, NotEqual, Swizzle and Shuffle
opcodes from the Boolean types. These are unlikely to be well supported natively,
and can be synthesized using Select.
- Changes the signature of Relational opcodes to return boolean vectors.
- Changes the signature of Select opcodes to take boolean vectors.
- Updates the ARM implementation of Relational and Select opcodes.
LOG=N
BUG=v8:4124
Review-Url: https://codereview.chromium.org/2700813002
Cr-Commit-Position: refs/heads/master@{#43348}
This fixes a missing name check for keyed property loads targeting the
global object where the feedback was warmed up with a single name. This
affects {JSLoadProperty} nodes only, syntactic global property loads via
the {JSLoadGlobal} operator are not affected.
R=bmeurer@chromium.org
TEST=mjsunit/regress/regress-crbug-694416
BUG=chromium:694416
Change-Id: I54aa3f27eaa72630539f02602ec7642b04835b27
Reviewed-on: https://chromium-review.googlesource.com/445224
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43344}
Two controls, one for instantiation and one for compilation. They allow
the embedder (e.g. Chrome) check properties of the parameters of those
two operations, and decide if they are allowed to continue.
For example, Chrome may now decline compilation of certain size buffers,
in synchronous cases; same for instantiation (where the buffer size
refers to the size of the buffer containing wasm wire bytes)
BUG=v8:5981
Review-Url: https://codereview.chromium.org/2699843003
Cr-Original-Commit-Position: refs/heads/master@{#43295}
Committed: d9bc0ffb16
Review-Url: https://codereview.chromium.org/2699843003
Cr-Commit-Position: refs/heads/master@{#43336}
This patch refactors the Atomics builtins so that they are implemented
as C++ builtins rather than experimental JS builtins. Previously, each
of these functions called out to a runtime function, so no significant
change in performance is anticipated. The goal of this patch is to
remove the last user of experimental JS builtins so that the mechanism
can be removed, for performance reasons. The patch includes a drive-by
fix of a check-fail. For the most part, the patch is just moving code
without modification from runtime-atomics.cc to
builtins-sharedarraybuffer.cc .
BUG=v8:5880
Review-Url: https://codereview.chromium.org/2698813004
Cr-Commit-Position: refs/heads/master@{#43335}
qNaN and sNaN values have different binary representation on MIPS
compared to ARM/x86 architectures. We are skipping these tests because
we can't provide specific NaNs encodings from ARM/x86 architectures.
BUG=
Review-Url: https://codereview.chromium.org/2702213003
Cr-Commit-Position: refs/heads/master@{#43327}
Take runtime path if startIndex parameter requires a ToInteger() call,
which can modify the elements kind of the receiver.
This removes a stub call from the builtin, and simplifies code slightly.
BUG=v8:5986
R=bmeurer@chromium.org, cbruni@chromium.org
Change-Id: Id238a81ab8ba28621858004b34d00a4356b8037f
Reviewed-on: https://chromium-review.googlesource.com/445006
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Commit-Queue: Caitlin Potter <caitp@igalia.com>
Cr-Commit-Position: refs/heads/master@{#43323}
info.This returns a Local<Object>, which results in a call to
Utils::OpenHandle<JSReceiver>. Casting to a Local<Value> first uses the
correct OpenHandle<Object> overload.
BUG=chromium:693500
Review-Url: https://codereview.chromium.org/2706833002
Cr-Commit-Position: refs/heads/master@{#43314}
This makes it easier to implement asynchronous compilation by hiding all the implementation details of both synchronous and asynchronous compilation within wasm-module.cc, whereas before the code in wasm-js.cc actually implemented asynchronous compilation in terms of synchronous.
BUG=
Review-Url: https://codereview.chromium.org/2695813005
Cr-Commit-Position: refs/heads/master@{#43310}
Reason for revert:
Due to arm64 failures
Original issue's description:
> [interpreter] Create custom call opcodes for specific argument counts
>
> Specifically, add bytecodes for Call0, Call1, Call2, CallProperty0, CallProperty1,
> and CallProperty2. Also share the bytecode handler code between between
> equivalent CallX and CallPropertyX handlers.
>
> Review-Url: https://codereview.chromium.org/2684993002
> Cr-Commit-Position: refs/heads/master@{#43290}
> Committed: 00d6f1f80aTBR=rmcilroy@chromium.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
Review-Url: https://codereview.chromium.org/2709533002
Cr-Commit-Position: refs/heads/master@{#43308}
The constant field tracking is still disabled.
BUG=v8:5495
Change-Id: I543fe50b82e2255bbf200ea785ec53e3623e30cb
Reviewed-on: https://chromium-review.googlesource.com/440924
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43304}
Reason for revert:
Introduces a new test failure/flake: https://build.chromium.org/p/client.v8/builders/V8%20Linux/builds/16427
Original issue's description:
> [wasm] Embedder can control what buffers wasm compilation works on.
>
> Two controls, one for instantiation and one for compilation. They allow
> the embedder (e.g. Chrome) check properties of the parameters of those
> two operations, and decide if they are allowed to continue.
>
> For example, Chrome may now decline compilation of certain size buffers,
> in synchronous cases; same for instantiation (where the buffer size
> refers to the size of the buffer containing wasm wire bytes)
>
> BUG=v8:5981
>
> Review-Url: https://codereview.chromium.org/2699843003
> Cr-Commit-Position: refs/heads/master@{#43295}
> Committed: d9bc0ffb16TBR=bradnelson@chromium.org,titzer@chromium.org,mtrofin@chromium.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
BUG=v8:5981
Review-Url: https://codereview.chromium.org/2701413002
Cr-Commit-Position: refs/heads/master@{#43303}
The bytecode generator did not necessarily know for which scope, and
thus language mode, it was generating code, because it only tracked
scopes that have a context. This led to wrong behavior in some
examples involving class expressions (which are always in strict
mode).
With this CL, the bytecode generator explicitly tracks the current
scope, independent of whether it has a context.
BUG=v8:5927
Change-Id: Ifa6b3ee5e13e07b63d00e74c7f557a328633c88b
Reviewed-on: https://chromium-review.googlesource.com/444785
Commit-Queue: Georg Neis <neis@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43300}
Currently, typeof o, where o is an undetectable
callable object (such as document.all), returns 'function' if
optimised. It should, however, return 'undefined'.
This CL excludes undetectable objects from the optimization
resulting in type 'function' and renames the related code to
reflect that.
BUG=v8:5972
R=bmeurer@chromium.org
Review-Url: https://codereview.chromium.org/2697063002
Cr-Commit-Position: refs/heads/master@{#43298}
Two controls, one for instantiation and one for compilation. They allow
the embedder (e.g. Chrome) check properties of the parameters of those
two operations, and decide if they are allowed to continue.
For example, Chrome may now decline compilation of certain size buffers,
in synchronous cases; same for instantiation (where the buffer size
refers to the size of the buffer containing wasm wire bytes)
BUG=v8:5981
Review-Url: https://codereview.chromium.org/2699843003
Cr-Commit-Position: refs/heads/master@{#43295}
Adds five new TF builtins for the spec defined functions/closures. This follows
mechanism similar to promise resolving functions approach where we store the
closure variables in a custom context.
Adds a new --harmony-promise-finally flag.
BUG=v8:5967
Review-Url: https://codereview.chromium.org/2695753002
Cr-Commit-Position: refs/heads/master@{#43294}
Specifically, add bytecodes for Call0, Call1, Call2, CallProperty0, CallProperty1,
and CallProperty2. Also share the bytecode handler code between between
equivalent CallX and CallPropertyX handlers.
Review-Url: https://codereview.chromium.org/2684993002
Cr-Commit-Position: refs/heads/master@{#43290}
This is the beginning of a new fuzzer that generates
correct-by-construction Wasm modules. This should allow us to better
exercise the compiler and correctness aspects of fuzzing. It is based off
of ahaas' original Wasm fuzzer.
At the moment, it can generate expressions made up of most binops, and
also nested blocks with unconditional breaks. Future CLs will add
additional constructs, such as br_if, loops, memory access, etc.
The way the fuzzer works is that it starts with an array of arbitrary
data provided by libfuzzer. It uses the data to generate an expression.
Care is taken to make use of the entire string. Basically, the
generator has a bunch of grammar-like rules for how to construct an
expression of a given type. For example, an i32 can be made by adding
two other i32s, or by wrapping an i64. The process then continues
recursively until all the data is consumed.
We generate an expression from a slice of data as follows:
* If the slice is less than or equal to the size of the type (e.g. 4
bytes for i32), then it will emit the entire slice as a constant.
* Otherwise, it will consume the first 4 bytes of the slice and use
this to select which rule to apply. Each rule then consumes the
remainder of the slice in an appropriate way. For example:
* Unary ops use the remainder of the slice to generate the argument.
* Binary ops consume another four bytes and mod this with the length
of the remaining slice to split the slice into two parts. Each of
these subslices are then used to generate one of the arguments to
the binop.
* Blocks are basically like a unary op, but a stack of block types is
maintained to facilitate branches. For blocks that end in a break,
the first four bytes of a slice are used to select the break depth
and the stack determines what type of expression to generate.
The goal is that once this generator is complete, it will provide a one
to one mapping between binary strings and valid Wasm modules.
Review-Url: https://codereview.chromium.org/2658723006
Cr-Commit-Position: refs/heads/master@{#43289}
... which is used for initializing properties with non compile time values.
Currently we use StoreOwnIC only for storing properties that already exist
in the boilerplate therefore we can reuse StoreIC dispatcher.
The proper StoreOwnIC dispatcher will be implemented in a separate CL.
BUG=v8:5495, v8:4414
Change-Id: I9c33fdb8499ec5be2c7fce1ecb6ce7aa285e5844
Reviewed-on: https://chromium-review.googlesource.com/443588
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43285}
The functions do not work correctly with concurrent sweeper and they
do not take weak references into account.
The latter is a fundamental problem for this tracing approach.
BUG=
Review-Url: https://codereview.chromium.org/2707433002
Cr-Commit-Position: refs/heads/master@{#43284}
Add `ValueSerializer::SetTreatArrayBufferViewsAsHostObjects()` which
instructs the `ValueSerializer` to treat ArrayBufferView objects as
host objects.
BUG=v8:5926
Review-Url: https://codereview.chromium.org/2696133007
Cr-Commit-Position: refs/heads/master@{#43281}
https://codereview.chromium.org/2694003002/ introduced
"SyntaxError: Lexical declaration cannot appear in a single-statement context"
for the case when let + desctructuring from a list happen.
As was pointed out in https://codereview.chromium.org/2694003002/#msg18, the
case without destructuring would also benefit from a better message: if a
single statement is expected and "let identifier = ..." is seen, the error is
indeed again that the lexical declaration is not a statement. However, the current
error is "Unexpected identifier", because the parser tries to accept "let" as
an identifier in an expression statement, and then gives up seeing the other
identifier after "let".
This CL ensures that the parser recognises the error properly and reports
accordingly. It also renames the existing test, which contains destructuring,
and adds the one with a non-destructuring lexical declaration.
BUG=v8:5686
Review-Url: https://codereview.chromium.org/2697193007
Cr-Commit-Position: refs/heads/master@{#43275}
https://crrev.com/2500363002 updated FunctionTemplate::HasInstance to
follow the hidden prototype chain of a global proxy to the global
object. However, remote contexts don't have a global object to check;
instead, teach the instance check knows about the conventions of
global proxy setup and have it also check the constructor's prototype.
Similarly, also teach Object::FindInstanceInPrototypeChain about the
unusual conventions for remote contexts.
BUG=527190
Review-Url: https://codereview.chromium.org/2698683003
Cr-Commit-Position: refs/heads/master@{#43263}
For functions declared in source code, the .toString() representation
will be an excerpt of the source code.
* For functions declared with the "function" keyword, the excerpt
starts at the "function" or "async" keyword and ends at the final "}".
The previous behavior would start the excerpt at the "(" of the
parameter list, and prepend a canonical `"function " + name` or
similar, which would discard comments and formatting surrounding the
function's name. Anonymous functions declared as function expressions
no longer get the name "anonymous" in their toString representation.
* For methods, the excerpt starts at the "get", "set", "*" (for
generator methods), or property name, whichever comes first.
Previously, the toString representation for methods would use a
canonical prefix before the "(" of the parameter list. Note that any
"static" keyword is omitted.
* For arrow functions and class declarations, the excerpt is unchanged.
For functions created with the Function, GeneratorFunction, or
AsyncFunction constructors:
* The string separating the parameter text and body text is now
"\n) {\n", where previously it was "\n/*``*/) {\n" or ") {\n".
* At one point, newline normalization was required by the spec here,
but that was removed from the spec, and so this CL does not do it.
Included in this CL is a fix for CreateDynamicFunction parsing. ')'
and '`' characters in the parameter string are no longer disallowed,
and Function("a=function(", "}){") is no longer allowed.
BUG=v8:4958, v8:4230
Review-Url: https://codereview.chromium.org/2156303002
Cr-Commit-Position: refs/heads/master@{#43262}
Before this patch, the registers needed for bytecode dispatch in interpreter
handlers were inconsistently stored in the interpreter frame and/or kept in
values that remained live across calls.
After this patch, these registers are explicitly reloaded after calls, making it
possible to elide the spills of those registers before the call in many cases.
Some highlights from the CL:
* Added methods to the CSA and InterpreterAssembler to efficiently store and
load Smis values and Smi interpreter registers on x64 without explicit
tagging/untagging.
* Created Variables for all of the interpreter-internal values that need to be
reloaded before bytecode dispatch at the end of an interpreter handler.
* The bytecode offset can be written out early in a handler by marking it
has having a call along it's critical path. By moving this early in a
handler, it becomes possible to use memory operands for pushes used to
marshall parameters when making calls.
Change-Id: Icf8d7798789f88a4489e06a7092616bbbb881577
Reviewed-on: https://chromium-review.googlesource.com/442566
Commit-Queue: Daniel Clifford <danno@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43260}
ES2017 forbids the sequence of tokens "let [" in in expression statements [1].
This CL makes ParserBase report those instances as SyntaxError. It also adds a
customised error message for that, because the standard "Unexpected token" is
not applicable: "let" itself is not forbidden in those context, only the
sequence of "let [".
[1] https://tc39.github.io/ecma262/#sec-expression-statement
BUG=v8:5686
Review-Url: https://codereview.chromium.org/2694003002
Cr-Commit-Position: refs/heads/master@{#43258}
We were looking at the unreachable flag or stack_depth of the target frame
instead of the current one in a couple of places (most notably BreakTo).
This change fixes these bugs and makes us pass the latest spec tests for
br_table validation. Also need to ensure that br_table targets have consistent
types, which is not implied if the stack is polymorphic.
R=titzer@chromium.org
BUG=
Review-Url: https://codereview.chromium.org/2696813002
Cr-Commit-Position: refs/heads/master@{#43250}
The serializer won't ever write a more complex object. Not validating this
allows other things to be used as keys, and converted to string when the
property set actually occurs. It turns out this gives an opportunity to trigger
OOM by giving an object a key which is a very large sparse array (whose string
representation is very large).
This case is now rejected by the deserializer.
BUG=chromium:686511
Review-Url: https://codereview.chromium.org/2697023002
Cr-Commit-Position: refs/heads/master@{#43249}
One optimization in the machine-operator-reducer did not consider that
that word32 shift left instructions only consider the last 5 bits of
the shift input.
The issue only occurs for WebAssembly because in JavaScript we always
add a "& 0xf" on the shift value to the TurboFan graph.
For additional background: The JavaScript and WebAssembly spec both
say that only the last 5 bits of the shift value are used in the
word32-shift-left operation. This means that an "x << 0x29", in the
code is actually executed as "x << 0x09". Therefore the changes in
this CL are okay because they mask the last 5 bit of the shift value.
BUG=chromium:689450
Change-Id: Id92f298ed6d7f1714b109b3f4fbcecd5ac6d30f7
Reviewed-on: https://chromium-review.googlesource.com/439312
Reviewed-by: Ben Titzer <titzer@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43245}
Map OOM breaks generated by inspector to DebugEvent.OOM.
This avoids generating unintentional DebugEvent.Break events.
Also be more future-proof in event categorization.
On a related note, this CL also fixes a DCHECK in
Runtime::GetFrameDetails.
The receiver needs to be grabbed from the inlined frame, not
the outer optimized frame. Optimized frames only provide the
receiver on a best-effort basis.
BUG=v8:5950
Review-Url: https://codereview.chromium.org/2696173002
Cr-Commit-Position: refs/heads/master@{#43244}
Reason for revert:
Please remove the file in status file too. Breaks presubmit:
https://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20presubmit/builds/14754
Or lets call it post-submit :(
Original issue's description:
> This is a workaround for the fact that %SetCode can "lose" the script for a js native. If the js native is re-initialized (for a Realm or something), then the source SharedFunctionInfo won't have a script anymore. Nonetheless, we may want to optimize the function. If we've compiled bytecode, then we can compile optimized code without a script.
>
> Here, we carve out a special exception for this case, so that we can turn on the --mark-shared-functions-for-tier-up.
>
> BUG=v8:5946
> R=leszeks@chromium.org
>
> Review-Url: https://codereview.chromium.org/2684033007
> Cr-Commit-Position: refs/heads/master@{#43240}
> Committed: 4123a3dd79TBR=leszeks@chromium.org,mstarzinger@chromium.org,marja@chromium.org,mvstanton@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5946
Review-Url: https://codereview.chromium.org/2703553002
Cr-Commit-Position: refs/heads/master@{#43242}
Produce the same scopes / variables for parameters (part 3).
This CL fixes the ordering + variable types in PreParser when there are
simple parameters + a rest parameter. In that case, Parser declares
unnamed temporaries for the non-rest params, then the rest param, then
the named variables (which are not parameters) for the non-rest params.
BUG=v8:5516
R=vogelheim@chromium.org
Change-Id: I9b006595039c8002b0508d1d2a200aa9a0f3eae0
Reviewed-on: https://chromium-review.googlesource.com/443527
Reviewed-by: Daniel Vogelheim <vogelheim@chromium.org>
Commit-Queue: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43241}
ES2016 changed the default timezone of dates to be conditional on
whether a time is included. The semantics were a compromise approach
based on web compatibility feedback from V8, but until now, we have been
shipping ES5.1 default timezone semantics. This patch implements the
new semantics, following ChakraCore and SpiderMonkey (though JSC
implements V8's previous semantics).
BUG=chromium:589858
Review-Url: https://codereview.chromium.org/2648603002
Cr-Commit-Position: refs/heads/master@{#43239}
This handles arithmetic addition operations during the early type-hint
lowering (i.e. during graph construction). The string addition case is
still handled by {JSTypedLowering} as it needs static type information.
R=bmeurer@chromium.org
Change-Id: I9df47dfc5bf7613c51f6d803ab43d5d3f6c21be8
Reviewed-on: https://chromium-review.googlesource.com/443185
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43235}
@@replace has a pretty complex implementation, taking different paths
for various situations (e.g.: global/nonglobal regexp, functional/string
replace argument, etc.). Each of these paths must implement similar
logic for calling into the RegExpBuiltinExec spec operation, and many
paths get this subtly wrong.
This CL fixes a couple of issues related to the way @@replace handles lastIndex:
* All paths now respect lastIndex when calling into exec (some used to assume 0).
* lastIndex is now advanced after a successful match for sticky regexps.
* lastIndex is now only reset to 0 on failure for sticky regexps.
BUG=v8:5361
Review-Url: https://codereview.chromium.org/2685183003
Cr-Commit-Position: refs/heads/master@{#43234}
When --harmony-async-iteration is enabled, it is now possible to
use the for-await-of loop, which uses the Async Iteration protocol
rather than the ordinary ES6 Iteration protocol.
the Async-from-Sync Iterator object is not implemented in this CL,
and so for-await-of loops will abort execution if the iterated object
does not have a Symbol.asyncIterator() method. Async-from-Sync
Iterators are implemented seperately in https://codereview.chromium.org/2645313003/
BUG=v8:5855, v8:4483
R=neis@chromium.org, littledan@chromium.org, adamk@chromium.org
Review-Url: https://codereview.chromium.org/2637403008
Cr-Commit-Position: refs/heads/master@{#43224}
The mips64 implementation always ended up in the slowpath due to some
loads that were the wrong width, so that is also fixed here.
BUG=v8:5974
Change-Id: Ie448a1fab5b7fca87597c5a1bf75443864e30c28
Reviewed-on: https://chromium-review.googlesource.com/443247
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43222}
This handles all arithmetic binary operations except addition during the
early type-hint lowering (i.e. during graph construction). We still use
static type information to potentially further reduce the speculative
operations down to pure operations during the typed lowering phase.
R=bmeurer@chromium.org
Change-Id: I8b93fd7c46ec8e5b81234a49624d503520c3d082
Reviewed-on: https://chromium-review.googlesource.com/443105
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43218}
- Removes shared InnerArrayCopyWithin JS builtin from src/js/array.js
- Implements %TypedArray%.prototype.copyWithin as a C++ builtin, which
relies on std::memmove rather than accessing individual eleements.
- Fixes the case where copyWithin is invoked on a TypedArray with a
detached buffer.
- Add tests to ensure that +/-Infinity (for all 3 parameters) is handled
correctly by the
algorithm
The C++ version gets through the benchmark more than 25000 times as
quickly as the JS implementation.
BUG=v8:5925, v8:5929, v8:4648
R=cbruni@chromium.org, adamk@chromium.org, littledan@chromium.org
Review-Url: https://codereview.chromium.org/2697593002
Cr-Commit-Position: refs/heads/master@{#43213}
... and don't clear ICs during GC. The IC clearing used to prevent memory
leaks but it's not necessary anymore because all the handlers that need
to embed objects already use weak cells.
This CL unblocks inlining of IC dispatchers into bytecode handlers.
BUG=v8:5917
Change-Id: I229b9ba8dba44f431dfbe8ac5370d855e3e84dd6
Reviewed-on: https://chromium-review.googlesource.com/442127
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43209}
This allows part of typed lowering that is solely based on type-hints to
run as part of the graph construction. The lowering in question does not
inspect types and hence doesn't require the typer to have run before. We
insert the speculative simplied-level operations in favor of the generic
JavaScript-level variants.
R=bmeurer@chromium.org
Change-Id: I5f0549fc1e4ff607622ee9059e6232a32f77db2e
Reviewed-on: https://chromium-review.googlesource.com/442584
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43208}
ParserBase::is_any_identifier currently does not recognise
Token::ESCAPED_STRICT_RESERVED_WORD as an identifier. This seems different
from what ParserBase::ParseIdentifierName does, and also prevents
"l\u0065t", unlike "let", from becoming a label.
This CL extends is_any_identifier to also accept ESCAPED_STRICT_RESERVED_WORD.
BUG=v8:5692
Review-Url: https://codereview.chromium.org/2695973003
Cr-Commit-Position: refs/heads/master@{#43204}
CreateNumberFormat of src/js/i18n.js implements
http://www.ecma-international.org/ecma-402/1.0/#sec-11.1.1.1, but has a typo
in step 33a. The spec says that the default value for minimumSignificantDigits
should be 1, while the script set it to 0.
This CL fixes that typo and adds a test for that.
BUG=v8:5554
Review-Url: https://codereview.chromium.org/2694673003
Cr-Commit-Position: refs/heads/master@{#43197}
After https://github.com/tc39/ecma262/pull/642, Date.UTC no longer requires
the month argument to be specified. The spec provides 0 as its default value.
This CL updates the builtins-date.cc code to reflect that and drops the test
suppression for test262/built-ins/Date/UTC/return-value.
BUG=v8:5534
Review-Url: https://codereview.chromium.org/2689173003
Cr-Commit-Position: refs/heads/master@{#43193}
BUG=
Change-Id: I4a5db9bc045a63e710d0115523ab23b98e7c7ae6
Reviewed-on: https://chromium-review.googlesource.com/442504
Reviewed-by: Georg Neis <neis@chromium.org>
Reviewed-by: Sathya Gunasekaran <gsathya@chromium.org>
Commit-Queue: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43189}
If the Reflect.construct receives an argument expected to be a constructor,
and the argument is not a constructor, V8 currently declares that
Reflect.construct is not a function. It should instead say that the offending
argument is not a constructor.
This is the case for all ports of builtins
(Builtins::Generate_ReflectConstruct). All of them make an
attempt to at least pass the right argument to the TypeError parametrised
message, calling out the offending Reflect.construct argument. However,
Runtime::kThrowCalledNonCallable extracts the callsite from those arguments,
discarding the precise information.
This CL adds Runtime::kNotConstructor, which reports the arguments passed
to it, and the CL also modifies the ports of builtins to make use of
Runtime::kNotConstructor
BUG=v8:5671
Review-Url: https://codereview.chromium.org/2688393003
Cr-Commit-Position: refs/heads/master@{#43182}
I identified lots of asm.js tests that are actually not valid according
to the spec, hence they execute in default-javascript-mode.
This CL fixes most of them by adding additional type annotations.
The atomic tests are totally non-spec-compliant by expecting a fourth
argument, and infinite-loops-taken expects a function-type parameter,
so I did not fix those.
I also did not fix the regression tests.
R=titzer@chromium.org, bradnelson@chromium.org
BUG=v8:4203
Review-Url: https://codereview.chromium.org/2663243002
Cr-Commit-Position: refs/heads/master@{#43179}
- Renames select, swizzle, and shuffle to be consistent with the S128 and
existing S32x4 ops, and reflect that these aren't arithmetic.
e.g. I16x8Swizzle -> S16x8Swizzle.
- Implements S16x8 and S8x16 Select operations and tests.
- Implements S128And, Or, Xor, Not operations and tests.
- Implements Swizzle for 32x4 formats.
- Refactors test macros that generate SIMD code.
TEST=cctest/test-run-wasm-simd/*
LOG=N
BUG=v8:4124
Review-Url: https://codereview.chromium.org/2683713003
Cr-Commit-Position: refs/heads/master@{#43168}
Test both cases where the interesting constructs occur at the
laziness boundary and cases where they occur deeper.
BUG=v8:5501
R=vogelheim@chromium.org
Change-Id: I99e32cb0c829616011bf7d1f389a8d309b54d67e
Reviewed-on: https://chromium-review.googlesource.com/441844
Reviewed-by: Daniel Vogelheim <vogelheim@chromium.org>
Commit-Queue: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43157}
The constructor for TypedArray in js/typedarray.js emitted
kInvalidTypedArrayAlignment if the array offset exceeded the size of the
underlying buffer. This seems like a typo introduced in
https://codereview.chromium.org/2090353003.
The error message to be emitted instead coincides with the already existing
kInvalidDataViewOffset. The message string is independent of whether the
object in question is a DataView or a typed array, so this CL:
(1) renames kInvalidDataViewOffset to just kInvalidOffset, and
(2) uses kInvalidOffset instead of kInvalidTypedArrayAlignment for cases
when the TypedArray is constructed with an offset exceeding the buffer
size.
BUG=v8:5733
TEST=Run d8, execute "new Uint8Array(new ArrayBuffer(1),2)", see the error message mention the invalid offset 2.
Review-Url: https://codereview.chromium.org/2692753002
Cr-Commit-Position: refs/heads/master@{#43151}
This CL fixes some nits in TypeError messages, unifying the form of
kDefineDisallowed and kObjectNotExtensible to match what is used by the
majority of the other messages:
* "Cannot" vs. "Can't" -> choose "Cannot"
* "property:%" -> "property %"
* omit the full-stop at the end of the message
BUG=v8:5673
Review-Url: https://codereview.chromium.org/2686233008
Cr-Commit-Position: refs/heads/master@{#43150}
This adds support for deoptimizing into the JSConstructStub after the
receiver instantiation but before the actual constructor invocation.
Such a deoptimization point is needed for cases where instantiation
might be observed (e.g. when new.target is a proxy) and hence might
trigger a deopt.
We use this new deoptimization point for the "after" frame-state the
inliner attaches to {JSCreate} nodes being inserted when constructor
calls are being inlined.
R=jarin@chromium.org
TEST=mjsunit/regress/regress-5638b
BUG=v8:5638
Change-Id: I7c72c807ee8fb76d12e0e9ccab86d970ab1a0efd
Reviewed-on: https://chromium-review.googlesource.com/440125
Reviewed-by: Hannes Payer <hpayer@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43149}
We cannot skip the @@hasInstance lookup in instanceof depending on a
global protector cell, as the lookup of the property is observable
via proxies or accessors. So remove the global protector and properly
implement CSA::InstanceOf via GetPropertyStub, with an appropriate
fast-path for Function.prototype[@@hasInstance] where we call the
builtin code object directly if the function matches, skipping all
the checks from the call sequence, and also avoid the redundant
ToBoolean conversion on the result.
R=yangguo@chromium.orgTBR=ulan@chromium.org
BUG=v8:5958
Review-Url: https://codereview.chromium.org/2684033012
Cr-Commit-Position: refs/heads/master@{#43137}
Reason for revert:
Due to security issue described in review thread.
Original issue's description:
> [typedarrays] move %TypedArray%.prototype.copyWithin to C++
>
> - Removes shared InnerArrayCopyWithin JS builtin from src/js/array.js
> - Implements %TypedArray%.prototype.copyWithin as a C++ builtin, which
> relies on std::memmove rather than accessing individual eleements.
> - Fixes the case where copyWithin is invoked on a TypedArray with a
> detached buffer.
> - Add tests to ensure that +/-Infinity (for all 3 parameters) is handled correctly by the
> algorithm
>
> The C++ version gets through the benchmark more than 25000 times as
> quickly as the JS implementation.
>
> BUG=v8:5925, v8:5929, v8:4648
> R=cbruni@chromium.org, adamk@chromium.org, littledan@chromium.org
>
> Review-Url: https://codereview.chromium.org/2671233002
> Cr-Commit-Position: refs/heads/master@{#42975}
> Committed: 0f1c626d55TBR=cbruni@chromium.org,adamk@chromium.org,bmeurer@chromium.org,cwhan.tunz@gmail.com,caitp@igalia.com
# Not skipping CQ checks because original CL landed more than 1 days ago.
BUG=v8:5925, v8:5929, v8:4648
Review-Url: https://codereview.chromium.org/2693753002
Cr-Commit-Position: refs/heads/master@{#43132}
Do not allow that holey properties are defined in Array sort.
Throw a type error if the array is not extensible and there are holey
properties in the middle of the array.
BUG=v8:4888
Review-Url: https://codereview.chromium.org/2664173002
Cr-Commit-Position: refs/heads/master@{#43126}
If a job was already enqueued, EnqueueAndStep would still step the job one
more step. However, since it didn't take the job out of the
pending_background_jobs pool, the job could get picked up by a background
thread which would try to step it, but it the job is now at a step which
can't be run on the background.
BUG=v8:5203,chromium:685515
Change-Id: I2cee2a33625ba455aca49a8037601be9ff8bb73f
Reviewed-on: https://chromium-review.googlesource.com/441084
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Jochen Eisinger <jochen@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43121}
The heuristic checks for "(function", and now it also checks for
"(async function".
BUG=v8:4230
Review-Url: https://codereview.chromium.org/2682173005
Cr-Commit-Position: refs/heads/master@{#43120}
This roll includes the SharedArrayBuffer tests (skipping for now)
but doesn't include the $ renaming.
This is a reland; previously, I reverted because I was confused about why
the rename of $ to $262 didn't break tests; it now seems that the
previous patch left it as an alias. This patch does not do the renaming
yet, as the renaming usage has not landed upstream yet.
R=adamk
Review-Url: https://codereview.chromium.org/2685603003
Cr-Commit-Position: refs/heads/master@{#43118}
Don't block on inner function compilation before competing outer function
compilation. Instead wait for the compilation to complete when the function
is called.
BUG=v8:5203
Review-Url: https://codereview.chromium.org/2686673002
Cr-Commit-Position: refs/heads/master@{#43116}
Removes handles from bytecode generation, instead storing
un-internalized AstValues (and other, similar values such as Scopes and
AstRawStrings) in the constant array builder.
This will allow us in the future to generate the bytecode before
internalizing the AST.
BUG=v8:5832
Change-Id: I3b8be8f7329a484eb1e5d12808b001d3475239da
Reviewed-on: https://chromium-review.googlesource.com/439326
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Marja Hölttä <marja@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43115}
When running main-thread compiler-dispatcher jobs, ensure that we enter the
correct Context. Also adds a test for compiling an extension in the compiler
dispatcher to ensure that idle tasks enter the correct context before
finalizing the compilation.
BUG=v8:5203
Review-Url: https://codereview.chromium.org/2679193004
Cr-Commit-Position: refs/heads/master@{#43111}
This introduces new maps to track whether we have created at most one
closure. If we have created just one closure, Turbofan will
specialize the code to its context.
Review-Url: https://codereview.chromium.org/2680313002
Cr-Commit-Position: refs/heads/master@{#43108}
In order to compile eager inner functions on a background thread we need to
keep the handles created during parsing and scope analysis alive until the
background compilation is complete. In order to do that, we allocate the
handles in a deferred handle scope and keep the deferred handles alive with
a shared_ptr in the ParseInfo and CompileInfo respectively.
BUG=v8:5203
Review-Url: https://codereview.chromium.org/2650883002
Cr-Commit-Position: refs/heads/master@{#43107}
Reason for revert:
Reverting due to causing Word64AndWithImmediateWithWord64Sh to fail locally (but not on the bot).
BUG=v8:5956
Original issue's description:
> [arm64] A shift of 0 is not allowed in ubfx.
>
> R=bmeurer@chromium.org, v8-arm-ports@googlegroups.com
> BUG=v8:5951
>
> Review-Url: https://codereview.chromium.org/2685943003
> Cr-Commit-Position: refs/heads/master@{#43090}
> Committed: c46ccef921TBR=bmeurer@chromium.org,v8-arm-ports@googlegroups.com,martyn.capewell@arm.com,ahaas@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5951
Review-Url: https://codereview.chromium.org/2687373002
Cr-Commit-Position: refs/heads/master@{#43105}
Alternative approach to https://codereview.chromium.org/2667983004/, which
does not depend on implicit control flow changes from
https://codereview.chromium.org/2664083002
- Remove handling for `async function` from Parser::RewriteReturn(). This functionality
is moved to BytecodeGenerator::BuildAsyncReturn(). This ensures that promise resolution
is deferred until all finally blocks are evaluated fully.
- Add a new deferred command (CMD_ASYNC_RETURN), which instructs ControlScope to
generate return code using BuildAsyncReturn rather than BuildReturn.
- Parser has a new `NewReturnStatement()` helper which determines what type of return
statement to generate based on the type of function.
BUG=v8:5896, v8:4483
R=littledan@chromium.org, neis@chromium.org, rmcilroy@chromium.org, adamk@chromium.org, gsathya@chromium.org
Review-Url: https://codereview.chromium.org/2685683002
Cr-Commit-Position: refs/heads/master@{#43104}
This fixes the case where the index passed to {HMaybeGrowElements} used
to derive the new capacity for the elements backing store does not fit
into Smi range. Such an overflow would fail the capacity check and cause
growing to be skipped. Subsequent keyed stores would potentially go out
of bounds.
R=mvstanton@chromium.org
TEST=mjsunit/regress/regress-crbug-686427
BUG=chromium:686427
Review-Url: https://codereview.chromium.org/2686263002
Cr-Commit-Position: refs/heads/master@{#43101}
Also make them use the helpers that I introduced recently.
BUG=v8:5636
Review-Url: https://codereview.chromium.org/2684343004
Cr-Commit-Position: refs/heads/master@{#43100}
Move the logic into Scope::DeclareVariable to be more robust.
BUG=v8:5636
Review-Url: https://codereview.chromium.org/2685293003
Cr-Commit-Position: refs/heads/master@{#43098}
The use of setjmp/longjmp makes the cctests in test-run-wasm and
test-run-wasm-64 flaky on Windows, and I think that it is better not
to use it. With this CL I replace it as follows:
Similar to the setjmp/longjmp implementation we still call a C
function when a trap happens. However, instead of calling longjmp in
this C function we just set a flag which indicates that a trap
happened and then return. After we return from the C function we leave
the frame of the current wasm function and return with a RET
instruction. At the end of a test the wasm test runner checks the flag
to see if a trap happened.
Please take a special look at the LeaveFrame function on arm64.
R=titzer@chromium.org, clemensh@chromium.org, v8-arm-ports@googlegroups.comCC=jarin@chromium.org
Review-Url: https://codereview.chromium.org/2685583003
Cr-Commit-Position: refs/heads/master@{#43095}
Reason for revert:
Issue on arm64:
https://build.chromium.org/p/client.v8.ports/builders/V8%20Linux%20-%20arm64%20-%20sim/builds/5752
Original issue's description:
> [Compiler] Enable handles created during parsing and scope analysis to be deferred.
>
> In order to compile eager inner functions on a background thread we need to
> keep the handles created during parsing and scope analysis alive until the
> background compilation is complete. In order to do that, we allocate the
> handles in a deferred handle scope and keep the deferred handles alive with
> a shared_ptr in the ParseInfo and CompileInfo respectively.
>
> BUG=v8:5203
>
> Review-Url: https://codereview.chromium.org/2650883002
> Cr-Commit-Position: refs/heads/master@{#43091}
> Committed: 9346cd9b4cTBR=marja@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5203
Review-Url: https://codereview.chromium.org/2687973003
Cr-Commit-Position: refs/heads/master@{#43093}
In order to compile eager inner functions on a background thread we need to
keep the handles created during parsing and scope analysis alive until the
background compilation is complete. In order to do that, we allocate the
handles in a deferred handle scope and keep the deferred handles alive with
a shared_ptr in the ParseInfo and CompileInfo respectively.
BUG=v8:5203
Review-Url: https://codereview.chromium.org/2650883002
Cr-Commit-Position: refs/heads/master@{#43091}
In order to allow parallel compilation of eager inner functions, we need to
seperate the zone used for parsing (which will be shared between all the
parallel compile jobs) and the zone used for compilation. This CL changes
CompilationInfo to require a zone (which can be different from the zone in
ParseInfo). We then seal the ParseInfo zone after parsing and analysis is done
to prevent any further allocation in that zone, so that it can be shared
(read-only) with the parallel compile jobs.
BUG=v8:5203
Review-Url: https://codereview.chromium.org/2645403002
Cr-Commit-Position: refs/heads/master@{#43089}
Add a simple benchmark for a TypedArray constructor. Run once with the
default pipeline and once with turbofan so that we can compare the
performance.
Also fixes a typo in the Regex for the result of the CopyWithin
benchmark which stopped the results showing up in the perf
dashboard.
BUG=
Change-Id: Ic2eb0bd1e02b458c1163e97130abd0e7531c2e1c
Reviewed-on: https://chromium-review.googlesource.com/440225
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Peter Marshall <petermarshall@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43087}
This CL covers only the very simple cases.
BUG=v8:5516
R=vogelheim@chromium.org
Change-Id: Ib6ddc90cbcf1c923a7b72493cfd029cfa835462b
Reviewed-on: https://chromium-review.googlesource.com/440246
Reviewed-by: Daniel Vogelheim <vogelheim@chromium.org>
Commit-Queue: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43086}
Collecting precise invocation counts need to be explicitly
enabled. Once enabled, we disable optimization (optimized
code does not increment invocation count, and may inline
callees), and make sure feedback vectors interesting for
code coverage is not garbage-collected.
R=hpayer@chromium.org, jgruber@chromium.org
BUG=v8:5808
Review-Url: https://codereview.chromium.org/2686063002
Cr-Commit-Position: refs/heads/master@{#43082}
This CL includes runtime and IC parts of the tracking. It is controlled by
compile-time flag FLAG_constant_field_tracking and currently disabled.
Transition from kConst to kMutable still involves map deprecation.
BUG=v8:5495
Review-Url: https://codereview.chromium.org/2598543003
Cr-Commit-Position: refs/heads/master@{#43081}
Collect code coverage from the available invocation counts.
The granularity is at function level, and invocation counts may
be lost to GC.
Coverage::Collect returns a std::vector of Coverage::ScriptData.
Each ScriptData contains a script ID and a std::vector of
Coverage::RangeEntry.
Each RangeEntry consists of a end position and the invocation
count. The start position is implicit from the end position of
the previous RangeEntry, or 0 if it's the first RangeEntry.
R=jgruber@chromium.org
BUG=v8:5808
Review-Url: https://codereview.chromium.org/2689493002
Cr-Commit-Position: refs/heads/master@{#43072}
arguments.h is one of the headers including objects-inl.h. Files needing
objects-inl.h used to innocently pull in debug.h, so that needs to be fixed now
too.
BUG=v8:5294
R=mstarzinger@chromium.org
Change-Id: I8ce671c533ed757103ef9a3b0bf0a0509230fdd8
Reviewed-on: https://chromium-review.googlesource.com/439287
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43054}
Since the empty string is canonical HeapObject now, we can use
this fact to optimize
- strict equality comparisons with the empty string to a
simple ReferenceEqual operation, and
- optimize ToBoolean to avoid instance type checks completely.
Drive-by-fix: Allow InternalizedString for Type::HeapConstant
in the type system. This is safe, since InternalizedStrings
can be compared to other heap constants by reference (except
for non-InternalizedStrings, which are excluded from the
HeapConstant type).
BUG=v8:5267
R=yangguo@chromium.org
Review-Url: https://codereview.chromium.org/2681273002
Cr-Commit-Position: refs/heads/master@{#43050}
E.g.,
{ function lazy_inner(b = somevar) { let somevar; } }
If we don't produce the same scopes, PreParser thinks that the unresolved
variable inside the default parameter resolves into the variable declared inside
the function. Thus, it's not correctly recorded as a free variable.
One part is already done by https://codereview.chromium.org/2638333002 . But at
the laziness boundary, we still produced different scopes.
Unlike previously thought, this is also needed for lazy inner function
correctness, not only for "preparser scope analysis" (ie., skipping inner
functions).
BUG=v8:5938
Change-Id: I047cd43ef16478bb0f18d1f114845e7d1ab8c5f2
Reviewed-on: https://chromium-review.googlesource.com/439345
Commit-Queue: Marja Hölttä <marja@chromium.org>
Commit-Queue: Toon Verwaest <verwaest@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43044}
Without doing this, a JSMessageObject can be kept alive by the isolate, which
in turn keeps the context alive, until the message is cleared.
BUG=v8:5941
Review-Url: https://codereview.chromium.org/2675203005
Cr-Commit-Position: refs/heads/master@{#43043}
Where the arguments have already been inlined, we can replace these
calls with a direct call. We have to make sure that the iteration over
the arguments is not observable.
Also factor out the large chunk of logic shared with
ReduceJSConstructWithSpread.
BUG=v8:5932
Change-Id: I6c4fac670028fbd8ca82c4474d4392231573bc49
Reviewed-on: https://chromium-review.googlesource.com/439329
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Peter Marshall <petermarshall@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43039}
It used to require >1GB of memory which leads to flaky test failures on
machines with less memory when executing multiple variants in parallel
R=cbruni@chromium.org,ulan@chromium.org
BUG=v8:5706
Change-Id: Id8c6f49cbfa51f2d443991c1493f225810efb18f
Reviewed-on: https://chromium-review.googlesource.com/439310
Commit-Queue: Camillo Bruni <cbruni@google.com>
Commit-Queue: Jochen Eisinger <jochen@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43038}
