atomic-utils.h only uses functionality from base/, and also by moving it into
base/, code outside of v8_base can benefit from it.
BUG=v8:4991
LOG=n
Review-Url: https://codereview.chromium.org/1954603002
Cr-Commit-Position: refs/heads/master@{#36114}
Assembler::testw(Register, Immediate) and Assembler::testw(const Operand&, Immediate) were emitting only the first 8 bits of a 16-bit immediate, causing unexpected crashes.
This went unnoticed because before http://crrev.com/1948453002 no compiler was using them.
Review-Url: https://codereview.chromium.org/1962563003
Cr-Commit-Position: refs/heads/master@{#36110}
The bailout points for named and keyed property loads when doing super
property calls are not being prepared by full-codegen, even though we
are using them in TurboFan for deopts and stack traces.
R=jarin@chromium.org
TEST=mjsunit/regress/regress-4971
BUG=v8:4971
LOG=n
Review-Url: https://codereview.chromium.org/1960083002
Cr-Commit-Position: refs/heads/master@{#36109}
This catches malformed code like the following example:
<expr>
<block begin>
<expr>
<binop>
<end>
Which is illegal because the inputs to the binop cross the block boundary.
R=rossberg@chromium.org,ahaas@chromium.org
BUG=
Review-Url: https://codereview.chromium.org/1961853002
Cr-Commit-Position: refs/heads/master@{#36103}
The flag in question used to fall-back to Crankshaft whenever an OSR
request couldn't be handled by TurboFan. By now OSR in TurboFan is
sufficiently stabilized that one single --use-osr flag should do it.
R=titzer@chromium.org
Review-Url: https://codereview.chromium.org/1960043002
Cr-Commit-Position: refs/heads/master@{#36102}
mjsunit/es6/mirror-collections fails with ignition because dead registers
may hold references to objects. This prevents GC from collecting
otherwise dead objects. Dead registers are not cleared because the cost
of clearing them outweighs its benefits. Hence, modifying this test to
work around this problem.
BUG=v8:4280,v8:4853
LOG=N
Review-Url: https://codereview.chromium.org/1945223002
Cr-Commit-Position: refs/heads/master@{#36098}
Handles of this type are automatically reset by the garbage collector
when their objects are not longer reachable.
The motivation is to reduce pause time of external.weak_global_handles
phase of the garbage collector by not maintaing the list of pending
callbacks and not calling the callbacks.
Local testing on discourse page of the v8.inifinite_scroll benchmark
shows 7x improvement for this GC phase.
Before:
external.weak_global_handles
len: 21
min: 0.0
max: 4.5
avg: 0.757142857143
After:
external.weak_global_handles
len: 21
min: 0.0
max: 0.5
avg: 0.109523809524
A follow-up patch will enable the new phantom handles in Chromium.
BUG=chromium:608333
LOG=NO
Review-Url: https://codereview.chromium.org/1950963002
Cr-Commit-Position: refs/heads/master@{#36095}
Add comments explaining how to iterate over an OrderedHashTable.
Use the correct strategy for iteration in Set::AsArray().
Add a DCHECK bounds check in OrderedHashTable::KeyAt().
BUG=v8:4946
LOG=y
Review-Url: https://codereview.chromium.org/1952093002
Cr-Commit-Position: refs/heads/master@{#36091}
Some tests which fail with '--ignition --turbo --turbo-from-bytecode' pass with
just '--ignition'. Unskip these tests. Also group other tests with related
bugs.
BUG=v8:4680
LOG=N
Review-Url: https://codereview.chromium.org/1944413002
Cr-Commit-Position: refs/heads/master@{#36083}
This changes different locations to extract the reference to the wasm
object and the function index from the stack trace, and make it
available through all the APIs which process stack traces.
The javascript CallSite object now has the new methods isWasm(),
getWasmObject() and getWasmFunctionIndex(); the byte offset is
available via getPosition().
Function names of wasm frames should be fully functional with this
commit, position information works reliably for calls, but not for
traps like unreachable or out-of-bounds accesses.
R=titzer@chromium.org, yangguo@chromium.org
Review-Url: https://codereview.chromium.org/1909353002
Cr-Commit-Position: refs/heads/master@{#36067}
This operator was initially designed to handle arbitrary effect merging
for effect relaxation, but we don't do that (at least currently). So no
need to keep the dead operator around.
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/1954983002
Cr-Commit-Position: refs/heads/master@{#36063}
port 117a56b7c2 (r36044)
original commit message:
- Add new RelocInfo mode WASM_MEMORY_SIZE_REFERENCE in the assembler and add relocation information to immediates in compare instructions.
- Use relocatable constants for MemSize/BoundsCheck in the wasm compiler
BUG=
Review-Url: https://codereview.chromium.org/1947413003
Cr-Commit-Position: refs/heads/master@{#36058}
Scope analysis is over-conservative when treating variable resolutions
as possibly-shadowed by a sloppy eval. In the attached bug, this comes
into play since catch scopes have different behavior with respect to
the "calls eval" in eager vs lazy compilation (in the latter, they
are never marked as "calls eval" because CatchContexts don't have
an associated ScopeInfo).
This patch changes the scope-type check to also eliminate a few other
cases where shadowing isn't possible, such as non-declaration block scopes.
BUG=chromium:608279
LOG=n
Review-Url: https://codereview.chromium.org/1950803002
Cr-Commit-Position: refs/heads/master@{#36046}
A load instruction will implicitely clear the top 32 bits when writing to a W
register. This patch avoids generating a `mov` instruction to zero-extend the
result in this case.
For example, this occurs in the generated code for dispatching to the next
bytecode in the interpreter:
kind = BYTECODE_HANDLER
name = LdaZero
compiler = turbofan
Instructions (size = 36)
0x32e64c60 0 add x19, x19, #0x1 (1)
0x32e64c64 4 ldrb w0, [x20, x19]
0x32e64c68 8 mov w0, w0
^^^^^^^^^^
0x32e64c6c 12 lsl x0, x0, #3
0x32e64c70 16 ldr x1, [x21, x0]
0x32e64c74 20 movz x0, #0x0
0x32e64c78 24 br x1
BUG=
Review-Url: https://codereview.chromium.org/1950013003
Cr-Commit-Position: refs/heads/master@{#36038}
Previously, the species protector was invalidated whenever the __proto__ of
an Array instance was manipulated. Then, if the map's new_target_is_base field
remained set, it was correct to conclude that GetPrototypeOf(array) was
%ArrayPrototype%. However, this choice caused the popular D3 framework to
invalidate the species protector, causing many functions to become slower.
This patch eliminates that aspect of the species protector. Instead, the check
is to look at the instance->map()->prototype(). It is valid to look directly
at the map's prototype slot, ignoring hidden prototypes and proxies, because
- This is only called on Array instances, so the receiver cannot be a Proxy.
- For hidden prototypes, any inaccuracy would only result in conservatively
taking the slow path.
Theoretically, this patch could make methods applied to arrays from other
contexts slower. However, the slowdown would only affect a particular array
instance and not have a global spill-over effect. Further, the slowdown could
be addressed by tracking, either in the instance's map or in the actual
prototype object, whether it is a %ArrayPrototype% from any context, in a way
which is cheap to query, and use that rather than comparing to the currently
executing native context.
In interactive testing, this patch led the OnShape CAD system to experience
faster load times (110+s -> 40s).
BUG=chromium:606207
LOG=Y
Review-Url: https://codereview.chromium.org/1936393002
Cr-Commit-Position: refs/heads/master@{#36033}
This method provides ability to get all properties of the object with passed filter in addition to existing GetOwnPropertyNames(context) method that returns only enumerable properties.
BUG=v8:3861,chromium:581495
R=yangguo@chromium.org
LOG=Y
Review-Url: https://codereview.chromium.org/1943773002
Cr-Commit-Position: refs/heads/master@{#36031}
We sometimes used to continue by jumping _back_ to the condition check at the
top of the loop. After my recent generator-related changes, that check is no
longer at the loop header, so a continue could create an additional loop. In
order to avoid this, we now always set the continue target to be the first
instruction following the loop body.
BUG=
Review-Url: https://codereview.chromium.org/1943383003
Cr-Commit-Position: refs/heads/master@{#36029}
Unlike previous implementation where the 'continue' keyword was a feature of a return statement the keyword is now recognized as a part of expression. Error reporting was significantly improved.
--harmony-explicit-tailcalls option is now orthogonal to --harmony-tailcalls so we can test both modes at the same time.
This CL also adds %GetExceptionDetails(exception) that fetches hidden |start_pos| and |end_pos| values from the exception object.
BUG=v8:4915
LOG=N
Review-Url: https://codereview.chromium.org/1928203002
Cr-Commit-Position: refs/heads/master@{#36024}
Now that everything is properly wired to the effect chain when we get to
ChangeLowering, we can safely inline the allocation fast path and only
need to consule the slow path stub fallback when bump pointer allocation
fails.
R=jarin@chromium.org
BUG=v8:4931
LOG=n
Review-Url: https://codereview.chromium.org/1951853002
Cr-Commit-Position: refs/heads/master@{#36022}
This fixes a bug where returning from a class literal inside
a try-finally didn't restore the context properly when
entering the finally clause.
BUG=v8:4965
LOG=n
Review-Url: https://codereview.chromium.org/1952633002
Cr-Commit-Position: refs/heads/master@{#36021}
It is already effectively disabled by --scavenge_reclaim_unmodified_objects.
BUG=
Review-Url: https://codereview.chromium.org/1944793002
Cr-Commit-Position: refs/heads/master@{#36018}
This allows for top-level eval code to be parsed properly before doing
optimization. It uses the same kind of re-parsing we already perform
when compiling code for debugging.
R=bmeurer@chromium.org
Review-Url: https://codereview.chromium.org/1884143003
Cr-Commit-Position: refs/heads/master@{#36014}
When storing an immediate integer or floating point zero, use the zero register
as the source value. This avoids the need to sometimes allocate a new register.
BUG=
Review-Url: https://codereview.chromium.org/1945783002
Cr-Commit-Position: refs/heads/master@{#36013}
The inline allocation sequence in the optimizing compilers cannot deal
well with funky types like JSRegExp, which have some magic fields in
addition to the inobject properties. In Crankshaft we already use the
FastNewObjectStub for %_NewObject in general, so fix TurboFan to the same.
Hopefully one day we can kill %_NewObject completely.
R=jarin@chromium.org
BUG=chromium:609029
LOG=n
Review-Url: https://codereview.chromium.org/1943403004
Cr-Commit-Position: refs/heads/master@{#36006}
Compiler backends get their language mode from the current
function, but should instead be deriving it from the current scope.
This allows proper handling of the always-strictness of class declarations
and expressions, and in particular the treatment of 'eval' calls in an
extends clause as a strict eval.
Also fix the parser's RecordEvalCall logic to only reach out to the
DeclarationScope in sloppy mode, which fixes the strange case of a
sloppy function thinking it contains a sloppy eval when in fact
it contains only a strict eval.
BUG=v8:4970
LOG=n
Review-Url: https://codereview.chromium.org/1931003003
Cr-Commit-Position: refs/heads/master@{#36001}
The problem is actually not related to try-catch, so here is a test
without try-catch.
BUG=chromium:607493
LOG=n
Review-Url: https://codereview.chromium.org/1943883002
Cr-Commit-Position: refs/heads/master@{#35985}
Reason for revert:
Jakob found the actual issue with the CL and is going to land the fix after relanding the WB elimination.
Original issue's description:
> Revert of [turbofan] Restore basic write barrier elimination. (patchset #2 id:20001 of https://codereview.chromium.org/1938993002/ )
>
> Reason for revert:
> Breaks WBs that should be there ;)
>
> https://uberchromegw.corp.google.com/i/client.v8/builders/V8%20Linux%20-%20gc%20stress/builds/3305
>
> Will open repro bug asap.
>
> Original issue's description:
> > [turbofan] Restore basic write barrier elimination.
> >
> > Restore the basic write barrier elimination that we used to run as part
> > of the simplified lowering phase (in ChangeLowering actually) before, by
> > moving the write barrier computation to SimplifiedLowering where we can
> > still look at types and consider the heap/isolate, and just update the
> > WriteBarrierKind in the FieldAccess/ElementAccess that we later use when
> > lowering to a machine Load/Store.
> >
> > CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux64_tsan_rel
> > R=mstarzinger@chromium.org
> > BUG=v8:4969,chromium:608636
> > LOG=n
> >
> > Committed: https://crrev.com/7dcb6ad379fbacbc8bdc8e11a6e50d680ffa3f62
> > Cr-Commit-Position: refs/heads/master@{#35969}
>
> TBR=mstarzinger@chromium.org,bmeurer@chromium.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=v8:4969,chromium:608636
>
> Committed: https://crrev.com/a782e93c617e728cded5ad878de11137a67891b7
> Cr-Commit-Position: refs/heads/master@{#35983}
TBR=mstarzinger@chromium.org,bmeurer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4969,chromium:608636
Review-Url: https://codereview.chromium.org/1943323002
Cr-Commit-Position: refs/heads/master@{#35984}
Reason for revert:
Breaks WBs that should be there ;)
https://uberchromegw.corp.google.com/i/client.v8/builders/V8%20Linux%20-%20gc%20stress/builds/3305
Will open repro bug asap.
Original issue's description:
> [turbofan] Restore basic write barrier elimination.
>
> Restore the basic write barrier elimination that we used to run as part
> of the simplified lowering phase (in ChangeLowering actually) before, by
> moving the write barrier computation to SimplifiedLowering where we can
> still look at types and consider the heap/isolate, and just update the
> WriteBarrierKind in the FieldAccess/ElementAccess that we later use when
> lowering to a machine Load/Store.
>
> CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux64_tsan_rel
> R=mstarzinger@chromium.org
> BUG=v8:4969,chromium:608636
> LOG=n
>
> Committed: https://crrev.com/7dcb6ad379fbacbc8bdc8e11a6e50d680ffa3f62
> Cr-Commit-Position: refs/heads/master@{#35969}
TBR=mstarzinger@chromium.org,bmeurer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4969,chromium:608636
Review-Url: https://codereview.chromium.org/1943743003
Cr-Commit-Position: refs/heads/master@{#35983}
Restore the basic write barrier elimination that we used to run as part
of the simplified lowering phase (in ChangeLowering actually) before, by
moving the write barrier computation to SimplifiedLowering where we can
still look at types and consider the heap/isolate, and just update the
WriteBarrierKind in the FieldAccess/ElementAccess that we later use when
lowering to a machine Load/Store.
CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux64_tsan_rel
R=mstarzinger@chromium.org
BUG=v8:4969,chromium:608636
LOG=n
Review-Url: https://codereview.chromium.org/1938993002
Cr-Commit-Position: refs/heads/master@{#35969}
Yield expressions are not allowed in formal parameter initializers of
generators, but we weren't properly catching the case where the yield
expression appeared in the 'extends' clause of a class expression.
They also aren't allowed in arrow functions, which we were failing to
catch due to not looking at the obscurely-named "FormalParameterInitializerError"
bit of ExpressionClassifier.
This patch passes along an ExpressionClassifier when parsing class
expressions and accumulates the proper error for that case.
For the arrow function case, the fix is simply to check for the
"formal parameter initializer" error once we know we've parsed
an arrow function. The error message used for this has also
been made specific to yield expressions.
Tests are added both for the error case and the non-error cases (where
yield is used in such a position inside the class body).
BUG=v8:4966, v8:4968, v8:4974
LOG=n
Review-Url: https://codereview.chromium.org/1941823003
Cr-Commit-Position: refs/heads/master@{#35957}
The ECMA 402 implementation previously pushed directly to real
Arrays, which risks having observably incorrect behavior in the
presence of monkey patching. This patch uses InternalArrays instead
to avoid that hazard.
R=jshin@chromium.org,yangguo@chromium.org
BUG=chromium:604299
LOG=N
Review-Url: https://codereview.chromium.org/1923803002
Cr-Commit-Position: refs/heads/master@{#35949}
Our implementation of the spec got one comparison wrong, at
step 19.d.iii (we were comparing against 'q' instead of 'p').
R=littledan@chromium.org
BUG=chromium:607566
LOG=n
Review-Url: https://codereview.chromium.org/1940643002
Cr-Commit-Position: refs/heads/master@{#35947}
The compilation pipeline is correctly guarding against accidental
tier-ups by now, the tests in question should no longer fail.
R=yangguo@chromium.org
BUG=v8:4961
LOG=n
Review-Url: https://codereview.chromium.org/1938983002
Cr-Commit-Position: refs/heads/master@{#35934}
Now ChangeLowering is only concerned with lowering memory access and
allocation operations, and all changes are consistently lowered during
the effect/control linearization pass. The next step is to move the
left over lowerings to a pass dedicated to eliminate redundant loads and
stores, eliminate write barriers, fold and inline allocations.
Drive-by-fix: Rename ChangeBitToBool to ChangeBitToTagged,
ChangeBoolToBit to ChangeTaggedToBit, and ChangeInt31ToTagged to
ChangeInt31ToTaggedSigned for consistency.
CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux64_tsan_rel
Committed: https://crrev.com/ceca5ae308bddda166651c654f96d71d74f617d0
Cr-Commit-Position: refs/heads/master@{#35924}
Review-Url: https://codereview.chromium.org/1941673002
Cr-Commit-Position: refs/heads/master@{#35929}
Reason for revert:
[Sheriff] Breaks mac gc stress:
https://build.chromium.org/p/client.v8/builders/V8%20Mac%20GC%20Stress/builds/5821
Original issue's description:
> [turbofan] Remove left-over change bits from ChangeLowering.
>
> Now ChangeLowering is only concerned with lowering memory access and
> allocation operations, and all changes are consistently lowered during
> the effect/control linearization pass. The next step is to move the
> left over lowerings to a pass dedicated to eliminate redundant loads and
> stores, eliminate write barriers, fold and inline allocations.
>
> Also remove the atomic regions now that we wire everything into the
> effect chain properly. This is an important step towards allocation
> inlining.
>
> Drive-by-fix: Rename ChangeBitToBool to ChangeBitToTagged,
> ChangeBoolToBit to ChangeTaggedToBit, and ChangeInt31ToTagged to
> ChangeInt31ToTaggedSigned for consistency.
>
> CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux64_tsan_rel
>
> Committed: https://crrev.com/ceca5ae308bddda166651c654f96d71d74f617d0
> Cr-Commit-Position: refs/heads/master@{#35924}
TBR=ishell@chromium.org,bmeurer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review-Url: https://codereview.chromium.org/1942733002
Cr-Commit-Position: refs/heads/master@{#35927}
This adds ignition to the testing variants that are run on all
bots.
Failing tests can only be skipped with the NO_IGNITION
keyword in status files. Existing expectations for the
ignition_turbofan variant are all duplicated and use the
NO_IGNITION keyword as well now.
BUG=v8:4280
LOG=N
Committed: https://crrev.com/132c09ed619f23fb7c6d26a4e3552c703389eabd
Cr-Commit-Position: refs/heads/master@{#35865}
Review-Url: https://codereview.chromium.org/1804003002
Cr-Commit-Position: refs/heads/master@{#35926}
Now ChangeLowering is only concerned with lowering memory access and
allocation operations, and all changes are consistently lowered during
the effect/control linearization pass. The next step is to move the
left over lowerings to a pass dedicated to eliminate redundant loads and
stores, eliminate write barriers, fold and inline allocations.
Also remove the atomic regions now that we wire everything into the
effect chain properly. This is an important step towards allocation
inlining.
Drive-by-fix: Rename ChangeBitToBool to ChangeBitToTagged,
ChangeBoolToBit to ChangeTaggedToBit, and ChangeInt31ToTagged to
ChangeInt31ToTaggedSigned for consistency.
CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux64_tsan_rel
Review-Url: https://codereview.chromium.org/1941673002
Cr-Commit-Position: refs/heads/master@{#35924}
When exporting `shared-library` in profile log, additionally export a
slide offset. This is required to parse profile logs generated on
systems with ASLR (OS X), otherwise it is impossible to assign C++
symbol names to their addresses in the log.
See: https://github.com/nodejs/node/issues/6466
BUG=
Review-Url: https://codereview.chromium.org/1934453003
Cr-Commit-Position: refs/heads/master@{#35921}
Further refactor the pipeline to even run the first scheduler (part of
the effect control linearization) concurrently. This temporarily
disables most of the write barrier elimination, but we will get back to
that later.
Drive-by-fix: Remove the dead code from ChangeLowering, and stack
allocate the Typer in the pipeline. Also migrate the AllocateStub to a
native code builtin, so that we have the code object + a handle to it
available all the time.
CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux64_tsan_rel
R=mstarzinger@chromium.org
BUG=v8:4969
LOG=n
Review-Url: https://codereview.chromium.org/1926023002
Cr-Commit-Position: refs/heads/master@{#35918}
Restrict the use of the `await` token as an identifier when parsing
source text as module code.
From
http://www.ecma-international.org/ecma-262/6.0/#sec-future-reserved-words:
> 11.6.2.2 Future Reserved Words
>
> The following tokens are reserved for used as keywords in future
> language extensions.
>
> Syntax
>
> FutureReservedWord ::
> enum
> await
>
> await is only treated as a FutureReservedWord when Module is the goal
> symbol of the syntactic grammar.
BUG=v8:4767
LOG=N
R=adamk@chromium.org
Review-Url: https://codereview.chromium.org/1723313002
Cr-Commit-Position: refs/heads/master@{#35914}
- Move the concurrent unmapping to MemoryAllocator
- Hide (private) members where possible
- MemoryAllocator:Free is now the bottleneck for freeing
- Pooled pages are either allocated from a set of pooled pages are obtained
through work stealing from the concurrent unmapper
BUG=chromium:605866, chromium:581412
LOG=N
This reverts commit 25ff296c4c.
Review-Url: https://codereview.chromium.org/1929503002
Cr-Commit-Position: refs/heads/master@{#35910}
Adapts FastCloneShallowObjectStub to enable it to be used by the
CreateObjectLiteral bytecode.
BUG=v8:4280
LOG=N
Review-Url: https://codereview.chromium.org/1922523002
Cr-Commit-Position: refs/heads/master@{#35909}
In order to have a wasm object (as JSObject), this adds a method to
instantiate the TestingModule. In order for this to work, the bytecode
and the function names of the TestingModule are stored for usage during
instantiation.
R=titzer@chromium.org
Review-Url: https://codereview.chromium.org/1916403002
Cr-Commit-Position: refs/heads/master@{#35906}
This ensures that the TurboFan pipeline is respecting the flag on the
CompilationInfo controlling whether to use the BytecodeGraphBuilder or
the AstGraphBuilder when ensuring deoptimization support.
R=rmcilroy@chromium.org
BUG=chromium:607871
LOG=n
Review-Url: https://codereview.chromium.org/1934563002
Cr-Commit-Position: refs/heads/master@{#35904}
This prepares for pulling chromium's build as dependency for
gn. After this, the files in build and gypfiles need to stay
in sync until chromium is updated.
BUG=chromium:474921
LOG=n
Review-Url: https://codereview.chromium.org/1848553003
Cr-Commit-Position: refs/heads/master@{#35898}
[wasm] Binary 11: Swap the order of section name / section length.
[wasm] Binary 11: Shorter section names.
[wasm] Binary 11: Add a prefix for function type declarations.
[wasm] Binary 11: Function types encoded as pcount, p*, rcount, r*
[wasm] Fix numeric names for functions.
R=rossberg@chromium.org,jfb@chromium.org,ahaas@chromium.org
BUG=chromium:575167
LOG=Y
Review-Url: https://codereview.chromium.org/1896863003
Cr-Commit-Position: refs/heads/master@{#35897}
[wasm] Binary 11: br_table takes a value.
[wasm] Binary 11: Add implicit blocks to if arms.
[wasm] Binary 11: Add arities to call, return, and breaks
[wasm] Binary 11: Add experimental version.
This CL changes the encoder, decoder, and tests to use a postorder
encoding of the AST, which is more efficient in decode time and
space.
R=bradnelson@chromium.org,rossberg@chromium.org,binji@chromium.org
BUG=chromium:575167
LOG=Y
Review-Url: https://codereview.chromium.org/1830663002
Cr-Commit-Position: refs/heads/master@{#35896}
This adds a dedicated flag for enabling the BytecodeGraphBuilder. The
intention is to be explicit when this variant is being tested and to
avoid unnecessary overhead in production code for a configuration that
is not yet shipping.
R=rmcilroy@chromium.org
Review-Url: https://codereview.chromium.org/1925123002
Cr-Commit-Position: refs/heads/master@{#35892}
Reason for revert:
[Sheriff] Looks like this breaks layout tests:
https://build.chromium.org/p/client.v8.fyi/builders/V8-Blink%20Linux%2064/builds/6442
Original issue's description:
> Remove more dead code after Object.observe removal
>
> This moves __{define,lookup}{Getter,Setter}__ to builtins.cc to free up the JavaScript implementation of DefineOwnProperty for deletion.
TBR=verwaest@chromium.org,jkummerow@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review-Url: https://codereview.chromium.org/1929293002
Cr-Commit-Position: refs/heads/master@{#35886}
These checks ensure that a TypeError is thrown, per spec, rather than
a runtime assert failure.
BUG=v8:4964
R=adamk
LOG=Y
Review-Url: https://codereview.chromium.org/1929123002
Cr-Commit-Position: refs/heads/master@{#35885}
This moves __{define,lookup}{Getter,Setter}__ to builtins.cc to free up the JavaScript implementation of DefineOwnProperty for deletion.
Review-Url: https://codereview.chromium.org/1904313004
Cr-Commit-Position: refs/heads/master@{#35876}
Reason for revert:
Will resubmit with proper fix and more test skips.
Original issue's description:
> [Ignition] Test ignition on all bots.
>
> This adds ignition to the testing variants that are run on all
> bots.
>
> Failing tests can only be skipped with the NO_IGNITION
> keyword in status files. Existing expectations for the
> ignition_turbofan variant are all duplicated and use the
> NO_IGNITION keyword as well now.
>
> BUG=v8:4280
> LOG=N
> NOTRY=true
TBR=rmcilroy@chromium.org,mstarzinger@chromium.org,yangguo@chromium.org,mythria@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280
Review-Url: https://codereview.chromium.org/1930943002
Cr-Commit-Position: refs/heads/master@{#35871}
This adds ignition to the testing variants that are run on all
bots.
Failing tests can only be skipped with the NO_IGNITION
keyword in status files. Existing expectations for the
ignition_turbofan variant are all duplicated and use the
NO_IGNITION keyword as well now.
BUG=v8:4280
LOG=N
NOTRY=true
Review-Url: https://codereview.chromium.org/1804003002
Cr-Commit-Position: refs/heads/master@{#35865}
DevTools uses the debug interrupt to trap on function entry. Without
source position at the stack check, we would get bogus source positions.
R=mstarzinger@chromium.org
BUG=chromium:595646
LOG=N
Review-Url: https://codereview.chromium.org/1925063002
Cr-Commit-Position: refs/heads/master@{#35864}
Further refactor the pipeline to even run the first scheduler (part of
the effect control linearization) concurrently. This temporarily
disables most of the write barrier elimination, but we will get back to
that later.
Review-Url: https://codereview.chromium.org/1926023002
Cr-Commit-Position: refs/heads/master@{#35861}
Return the empty string from StringPad if the filler argument is the empty
string, effectively returning the string unchanged in StringPadStart and
StringPadEnd.
```
"foo".padStart(100000, "") -> "foo"
```
BUG=v8:4957, v8:4954
LOG=N
R=littledan@chromium.org
Review-Url: https://codereview.chromium.org/1926773003
Cr-Commit-Position: refs/heads/master@{#35837}
The legacy function declaration locations from Annex B 3.2 and 3.4 do not
apply for generator declarations. This patch cracks down on those usages,
which is tested for by new incoming test262 tests.
BUG=v8:4824
LOG=Y
R=adamk
Review-Url: https://codereview.chromium.org/1900033003
Cr-Commit-Position: refs/heads/master@{#35835}
This is needed by Blink to implement the Custom Elements spec.
BUG=v8:4261
LOG=y
Review-Url: https://codereview.chromium.org/1910253005
Cr-Commit-Position: refs/heads/master@{#35833}
This makes sure that the testing pipeline withing the FunctionTester
class only performs AST analysis and deoptimization preparation when
graphs are generated from the AST (as opposed to from bytecode).
R=yangguo@chromium.org
Review-Url: https://codereview.chromium.org/1928523002
Cr-Commit-Position: refs/heads/master@{#35827}
This is necessary to eventually build a turbofan graph.
BUG=v8:4907
LOG=n
Review URL: https://codereview.chromium.org/1901713003
Cr-Commit-Position: refs/heads/master@{#35820}
Reason for revert:
Creates a spike of OOM(v8) crashers on Win32.
Original issue's description:
> [heap] Uncommit pooled pages concurrently
>
> - Move the concurrent unmapping to MemoryAllocator
> - Hide (private) members where possible
> - MemoryAllocator:Free is now the bottleneck for freeing
> - Pooled pages are either allocated from a set of pooled pages are obtained
> through work stealing from the concurrent unmapper
>
> BUG=chromium:605866, chromium:581412
> LOG=N
>
> Committed: https://crrev.com/2158df87116906160cebc3ad20c97f454822da03
> Cr-Commit-Position: refs/heads/master@{#35797}
TBR=hpayer@chromium.org,mlippautz@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:605866, chromium:581412
Review URL: https://codereview.chromium.org/1925563003
Cr-Commit-Position: refs/heads/master@{#35819}
This commit introduces IgnitionStatisticsExtension, which provides
methods for accessing Ignition statistics and counters from JavaScript.
The extension is registered when FLAG_ignition and
FLAG_trace_ignition_dispatches are both enabled.
For the moment, the only exposed function is
getIgnitionDispatchCounters(), which allows to retrieve Ignition
dispatch counters as a JavaScript object.
BUG=v8:4899
LOG=N
Review URL: https://codereview.chromium.org/1899133004
Cr-Commit-Position: refs/heads/master@{#35816}
Between the miss and patching, we run user code. That may already patch the same code. IC refactoring broke this (again), so including a regression test this time around.
BUG=chromium:601392
LOG=n
Review URL: https://codereview.chromium.org/1925583002
Cr-Commit-Position: refs/heads/master@{#35811}
- Move the concurrent unmapping to MemoryAllocator
- Hide (private) members where possible
- MemoryAllocator:Free is now the bottleneck for freeing
- Pooled pages are either allocated from a set of pooled pages are obtained
through work stealing from the concurrent unmapper
BUG=chromium:605866, chromium:581412
LOG=N
Review URL: https://codereview.chromium.org/1913083002
Cr-Commit-Position: refs/heads/master@{#35797}
This adds a new ignition_turbofan testing variant that'll
allow switching turbofan off in the other ignition variant.
The switch will happen in a follow up after reconfiguring
the bots.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1922623003
Cr-Commit-Position: refs/heads/master@{#35790}
The first version of --harmony-for-in avoided throwing PreParser
errors in order to retain use counting. This patch threads
use_counts_ through to the PreParser to allow use counting in
the PreParser while also throwing errors for this case.
Also slightly refactored the Parser code to do a little less
code duplication.
BUG=v8:4942
LOG=y
Review URL: https://codereview.chromium.org/1913203002
Cr-Commit-Position: refs/heads/master@{#35780}
If the target is deprecated, the object will be updated on first store. If the source for that store equals the target, this will invalidate the cached representation of the source. Preventively upgrade the target.
BUG=chromium:604300
LOG=n
Review URL: https://codereview.chromium.org/1905933002
Cr-Commit-Position: refs/heads/master@{#35770}
These also lower to subgraphs that have to be connected to the effect
and control chains, otherwise removing the atomic regions around heap
allocations would still be unsound.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1916763003
Cr-Commit-Position: refs/heads/master@{#35762}
This will allow to pull in gyp as a deps to the same location
as chromium (tools/gyp not build/gyp), needed for gn switch.
This is the first step of a 3-way move.
1) Copy v8.gyp in v8
2) Update references in embedders (follow up)
3) Remove old v8.gyp (follow up)
BUG=chromium:474921
LOG=n
NOTRY=true
Review URL: https://codereview.chromium.org/1920793002
Cr-Commit-Position: refs/heads/master@{#35760}
Use the FastNewSloppyArgumentsStub in the interpreter when function doesn't have
duplicate parameters.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1909903003
Cr-Commit-Position: refs/heads/master@{#35754}
This allows us to get rid of the "push TruncateFloat64ToInt32 into Phi"
trick that was used in the MachineOperatorReducer to combine the
ChangeTaggedToFloat64 and TruncateFloat64ToInt32 operations. Instead of
doing that later, we can just introduce the proper operator during the
representation selection directly.
Also separate the TruncateFloat64ToInt32 machine operator, which had two
different meanings depending on a flag (either JavaScript truncation or
C++ style round to zero). Now there's a TruncateFloat64ToWord32 which
represents the JavaScript truncation (implemented via TruncateDoubleToI
macro + code stub) and the RoundFloat64ToInt32, which implements the C++
round towards zero operation (in the same style as the other WebAssembly
driven Round* machine operators).
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1919513002
Cr-Commit-Position: refs/heads/master@{#35743}
Reason for revert:
Need to fix the #undef logic.
Original issue's description:
> Fix interpreter unittest for embedded constant pools.
>
> The offset from fp to the register file is based on the frame size
> -- which is one slot larger when embedded constant pools are enabled.
>
> TEST=unittests/DecodeBytecodeAndOperands
> R=rmcilroy@chromium.org, bmeurer@chromium.org, oth@chromium.org, mstarzinger@chromium.org
> BUG=
TBR=bmeurer@chromium.org,mstarzinger@chromium.org,oth@chromium.org,rmcilroy@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1909323003
Cr-Commit-Position: refs/heads/master@{#35736}
Removes some control edges added from the RawMachineAssembler to the end of the graph.
Adds a parameter that tells the Verifier to ignore effect and control inputs.
Review URL: https://codereview.chromium.org/1912853003
Cr-Commit-Position: refs/heads/master@{#35731}
Refactor the Scope object to automatically enable strict mode when
initialized as a "module" scope, relieving the caller of this
responsibility.
BUG=v8:4941
LOG=N
R=adamk@chromium.org
Review URL: https://codereview.chromium.org/1906923002
Cr-Commit-Position: refs/heads/master@{#35730}
This ensures the InterpreterEntryTrampoline heals code entry fields
inside closures when being called without a valid bytecode array. This
is preparatory work to allow removal of bytecode when switching some
functions to other types of code.
R=rmcilroy@chromium.org
BUG=v8:4280
LOG=n
Review URL: https://codereview.chromium.org/1904093002
Cr-Commit-Position: refs/heads/master@{#35724}
Get rid of further typing checks from ChangeLowering and put them into
the representation selection pass instead (encoding the information in
the operator instead).
Drive-by-change: Rename ChangeSmiToInt32 to ChangeTaggedSignedToInt32
for consistency about naming Tagged, TaggedSigned and TaggedPointer.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1909343002
Cr-Commit-Position: refs/heads/master@{#35723}
Adds IncStub and DecStub TurboFan code stubs and hooks them up to the
interpreter's Inc and Dec bytecodes (which are used for count
operations, e.g. i++).
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1901083002
Cr-Commit-Position: refs/heads/master@{#35720}
Fixes a mistake made in r35618 for register OperandSize calculations.
BUG=605470
LOG=N
Review URL: https://codereview.chromium.org/1908033002
Cr-Commit-Position: refs/heads/master@{#35719}
The new bytecodes replace two runtime functions. They are still unsupported by the bytecode graphbuilder, though.
BUG=v8:4907
LOG=n
Review URL: https://codereview.chromium.org/1904933002
Cr-Commit-Position: refs/heads/master@{#35716}
This is a follow-up to 58429beb7b
"Fix KeyedStore stub selection for STRING_WRAPPER_ELEMENTS".
BUG=chromium:602184
LOG=n
Review URL: https://codereview.chromium.org/1912443004
Cr-Commit-Position: refs/heads/master@{#35715}
The feature was deprecated in M49 and flagged off in M50.
This patch removes it entirely from the codebase.
Review URL: https://codereview.chromium.org/1909433003
Cr-Commit-Position: refs/heads/master@{#35714}
If we have to convert a float64 value to tagged representation and we
already know that the value is either in Signed31/Signed32 or
Unsigned32 range, then we can just convert the float64 to word32 and
use the fast word32 to tagged conversion. Doing this in
ChangeLowering (or the effect linearization pass) would be unsound, as
the types on the nodes are no longer usable.
This removes all Type uses from effect linearization. There's still some
work to be done for ChangeLowering tho.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1908093002
Cr-Commit-Position: refs/heads/master@{#35713}
Non-vectorized KeyedLoadICs used to remember whether they had seen Names
as keys; Crankshaft uses this information to avoid emitting elements
accesses which would always deopt. This CL restores that functionality
for vector ICs.
BUG=chromium:594183
LOG=y
R=mvstanton@chromium.org
Review URL: https://codereview.chromium.org/1912593002
Cr-Commit-Position: refs/heads/master@{#35706}
The CL #35651 (https://codereview.chromium.org/1858323003) exposed one hiden issue in RunTruncateFloat32ToUint32 test cases and X87 failed at it.
Here is the issue in RunTruncateFloat32ToUint32:
For float input = static_cast<float>(*i), the x87 GCC would optimize the input viariable in float floating register for release build.
The problem is:
SSE float register has single precision rounding semantic While X87 register hasn't when directly use floating register value. It will cause the value of input viariable has
different precision for IA32 and X87 port. So static_cast<uint32_t>(input) will be different for IA32 and X87 port too.
This led to CHECK_EQ(static_cast<uint32_t>(input), m.Call(input)) fail although V8 turbofan JITTed code m.Call(input) has exactly same result in both X87 and IA32 port.
So we add the following sentence to do type cast to keep the single precision for RunTruncateFloat32ToUint32 by forcing the input viariable get value from memory insread of
floating register.
Such as: volatile float input = static_cast<float>(*i).
BUG=
Review URL: https://codereview.chromium.org/1905883002
Cr-Commit-Position: refs/heads/master@{#35689}
This patch provides a new implementation of popcnt and ctz in the case
where the platform does not provide these instructions. Instead of
building a TF graph which implements it we now call a C function.
Additionally I turned on additional tests in test-run-wasm-64.cc
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1857363003
Cr-Commit-Position: refs/heads/master@{#35685}
Port 3518e492c0
Original commit message:
Short external strings do not cache the resource data, and may be used
for compressible strings. The assumptions about their lengths is
invalid and may lead to oob reads.
R=bmeurer@chromium.org
BUG=v8:4923,chromium:604897
LOG=N
Review URL: https://codereview.chromium.org/1902393004
Cr-Commit-Position: refs/heads/master@{#35683}
Our previous over-conservative answer caused us to emit hole checks in
full-codegen when eagerly parsing but not when lazily parsing.
With this patch, we use the positions of the BinaryOperations making up
the parameter list (which are the positions of the commas) to determine
the appropriate "end position" for each parameter's initializer. This means
that we get accurate-enough positions for the initializers in the eager
parsing step to get the same answers for hole-check-elimination that we
will later during ParseLazy.
In the included test case, for example:
(function() { ((s = 17, y = s) => s)(); } )();
^2 ^1
The old code would generate a hole check when trying to load
|s| for assignment to |y| (because it treated the closing parentheses
pointed to by "^1" as the "initialization position" of |s|).
The new code uses the comma pointed to by "^2" as the initialization
position of |s|. Since that occurs textually before the load of |s|,
full-codegen knows it can avoid the hole check.
BUG=v8:4908
LOG=n
Review URL: https://codereview.chromium.org/1900343002
Cr-Commit-Position: refs/heads/master@{#35678}
New incoming test262 tests check what happens on detached ("neutered")
ArrayBuffers. This patch makes the test262 infrastructure define
detaching an ArrayBuffer in terms of %ArrayBufferNeuter, passing the
--allow-natives-syntax flag, when it is needed.
BUG=v8:4193
LOG=N
R=adamk,machenbach
Review URL: https://codereview.chromium.org/1897203003
Cr-Commit-Position: refs/heads/master@{#35676}
This causes an incoming test262 test to pass, as part of the next
test262 roll.
R=adamk,machenbach
BUG=v8:1569
LOG=N
Review URL: https://codereview.chromium.org/1896293003
Cr-Commit-Position: refs/heads/master@{#35667}
Before, just a string was thrown, so no stack trace was attached there.
Generated code from wasm does not grow by this change, we just pass a
message id to the respective (new) runtime function.
R=mstarzinger@chromium.org, titzer@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1874383002
Cr-Commit-Position: refs/heads/master@{#35664}
Short external strings do not cache the resource data, and may be used
for compressible strings. The assumptions about their lengths is
invalid and may lead to oob reads.
R=jkummerow@chromium.org
BUG=v8:4923,chromium:604897
LOG=N
Review URL: https://codereview.chromium.org/1901573003
Cr-Commit-Position: refs/heads/master@{#35660}
Also factor out test cases from test-run-machops.cc into test-run-load-store.cc
BUG=chromium:599717
LOG=Y
Review URL: https://codereview.chromium.org/1858323003
Cr-Commit-Position: refs/heads/master@{#35651}
In a full mark-compact GC, instead of copying memory to old space for
pages that have more than X% live bytes, we just move the whole page over to old
space.
X=70 (default value)
BUG=chromium:581412
LOG=N
TBR=hpayer@chromium.org
This reverts commit 8b3337278f.
Review URL: https://codereview.chromium.org/1901093002
Cr-Commit-Position: refs/heads/master@{#35649}
[15.2.1.11 Static Semantics:
LexicallyDeclaredNames](https://tc39.github.io/ecma262/#sec-module-semantics-static-semantics-lexicallydeclarednames)
(in contrast with its definition for StatementListItem) makes no
explicit provision for HoistableDeclarations. This means that function
declarations are treated as lexically scoped in module code, as
described in section 15.2.1.11's informative note:
> At the top level of a function, or script, function declarations are
> treated like var declarations rather than like lexical declarations.
BUG=v8:4884
LOG=N
R=adamk@chromium.org
Review URL: https://codereview.chromium.org/1851673007
Cr-Commit-Position: refs/heads/master@{#35633}
Now that all 'const' declarations are of the ES2015 variety, the only
use of CONST_LEGACY is for function name bindings in sloppy mode
named function expressions.
This patch aims to delete all code meant to handle other cases, which
mostly had to do with hole initialization/hole checks. Since function
name bindings are initialized at entry to a function, it's impossible
to ever observe one in an uninitialized state.
To simplify the patch further, it removes the `IMPORT` VariableMode,
as it's not likely to be needed (IMPORT is identical to CONST for
the purpose of VariableMode).
Review URL: https://codereview.chromium.org/1895973002
Cr-Commit-Position: refs/heads/master@{#35632}
Without CL debugger on StepNext adds breakpoint to function where throw instruction is located. In case of StepNext we will skip pause in this function because StepNext shouldn't break in a deeper frame.
BUG=chromium:604495
R=yangguo@chromium.org
LOG=N
Review URL: https://codereview.chromium.org/1894263002
Cr-Commit-Position: refs/heads/master@{#35627}
Removes the register file machine register from the interpreter and
replaces it will loads from the parent frame pointer. As part of this
change the raw operand values for register values changes to enable the
interpreter to keep using the operand value as the offset from the
parent frame pointer.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1894063002
Cr-Commit-Position: refs/heads/master@{#35618}
In a full mark-compact GC, instead of copying memory to old space for
pages that have more than X% live bytes, we just move the whole page over to old
space.
X=70 (default value)
BUG=chromium:581412
LOG=N
Review URL: https://codereview.chromium.org/1863983002
Cr-Commit-Position: refs/heads/master@{#35610}
Adds code to call FunctionEntryHook on entry to the InterpreterEntryTrampoline.
This should give SyzyProf enough information to build non-discontinous profile
graphs, however since interpreter functions aren't uniquely identified they will
all get lumped into one bucket. This should be good enough for SyzyProf's current
use-case.
BUG=v8:4763
LOG=N
Review URL: https://codereview.chromium.org/1884133002
Cr-Commit-Position: refs/heads/master@{#35568}
This disables parsing when we optimize directly from bytecode using
TurboFan, because TurboFan is capable of building graphs out of the
bytecode directly.
R=bmeurer@chromium.org
BUG=v8:4280
LOG=n
Review URL: https://codereview.chromium.org/1891663004
Cr-Commit-Position: refs/heads/master@{#35567}
This introduces a compiler pass that schedules the graph and re-wires effect chain according to the schedule. It also connects allocating representation changes to the effect chain, and removes the BeginRegion and EndRegion nodes - they should not be needed anymore because all effectful nodes should be already wired-in.
This is an intermediate CL - the next step is to move lowering of the Change*ToTaggedEffect nodes to StateEffectIntroduction so that we do not have to introduce the effectful versions of nodes.
Review URL: https://codereview.chromium.org/1849603002
Cr-Commit-Position: refs/heads/master@{#35565}
Add support to optimize certain comparisons of typeof with known
strings to utilize the existing ObjectIs<Type> predicates. Also
add a new ObjectIsCallable, which is used to optimize the common
typeof x === "function" pattern.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1898653003
Cr-Commit-Position: refs/heads/master@{#35562}
These operators are really pure on the JavaScript level, and were only
part of the effect chain to make sure we don't accidentially schedule
them right after raw allocations, which is no longer an issue since we
now have the concept of atomic regions.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1893543004
Cr-Commit-Position: refs/heads/master@{#35552}
This patch correctly re-scopes inner scopes that can appear in do
expressions used as initializers to arrow parameters.
R=rossberg@chromium.org
BUG=v8:4904
LOG=N
Review URL: https://codereview.chromium.org/1887743002
Cr-Commit-Position: refs/heads/master@{#35542}
Usually, script compilation is expensive enough to warrant the extra
overhead of caching scripts immediatly.
BUG=chromium:588900
R=yangguo@chromium.org
LOG=n
Review URL: https://codereview.chromium.org/1890083002
Cr-Commit-Position: refs/heads/master@{#35527}
This prefixes the escape analysis flag with "experimental", thereby
making sure the flag in question is not being fuzzed. It will reduce
noise levels on ClusterFuzz again.
R=jarin@chromium.org
BUG=chromium:603653
LOG=n
Review URL: https://codereview.chromium.org/1894513002
Cr-Commit-Position: refs/heads/master@{#35521}
This moves the responsibility of preparing full-codegen code with
deoptimization support into the backends. This avoids generating such
code when optimization can be done directly from existing bytecode.
R=bmeurer@chromium.org
BUG=v8:4280
LOG=n
Review URL: https://codereview.chromium.org/1883403002
Cr-Commit-Position: refs/heads/master@{#35517}
The current context is stored as a stack slot on the interpreter frame
and therefore we don't need to also maintain a machine register for the
context. Removes this register from bytecode handlers.
In the process modifies this frees up a register on ia32 to keep the
dispatch table pointer in a register rather than on a stack slot on
ia32.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1887493004
Cr-Commit-Position: refs/heads/master@{#35511}
This changes closure creation to lower to inline allocations when
possible instead of going through the FastNewClosureStub. It allows us
to leverage all advantages of inline allocations on closures. Note that
it is only safe to embed the raw entry point of the compile lazy stub
into the code, because that stub is immortal and immovable.
R=mvstanton@chromium.org
Review URL: https://codereview.chromium.org/1573153002
Cr-Commit-Position: refs/heads/master@{#35499}
This allows us to remove the turbofan bailout that we introduced
as a response to crbug.com/589792.
BUG=chromium:589792
LOG=n
Review URL: https://codereview.chromium.org/1884713003
Cr-Commit-Position: refs/heads/master@{#35493}
Reason for revert:
performance impact
Original issue's description:
> Correctly annotate eval origin.
>
> There were a couple of issues with it:
> - interpreter is not supported
> - the source position was just accidentally correct for full-codegen
> - the eval origin could have been cached
>
> Also fixes a few other places to use AbstractCode.
>
> R=mstarzinger@chromium.org
>
> Committed: https://crrev.com/2f3a171adc9e620c2235bf0562145b9d4eaba66d
> Cr-Commit-Position: refs/heads/master@{#35257}
>
> Committed: https://crrev.com/ad4e8a27963b704bb70ec8bac0991c57296b1d16
> Cr-Commit-Position: refs/heads/master@{#35481}
TBR=mstarzinger@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1888013002
Cr-Commit-Position: refs/heads/master@{#35491}
- Get rid of fixing up pointers on the main thread
- Get rid of sweeping on the main thread
Instead:
- Record (and process afterwards) slots in parallel
- Add the pages to the concurrent sweeper as pointers have already been fixed
This reverts commit 6df04b296b.
BUG=chromium:581412
LOG=N
TEST=cctest/test-compaction/*
Review URL: https://codereview.chromium.org/1891683002
Cr-Commit-Position: refs/heads/master@{#35485}
Modifies Ignition to store code entry addresses in the dispatch table
rather than code objects. This allows the interpreter to avoid
calculating the code entry address from the code object on every
dispatch and provides a ~5-7% performance improvement on Octane with
Ignition.
This change adds ArchOpcode::kArchTailCallAddress to TurboFan to enable
tail call dispatch using these code addresses. It also adds a Dispatch
linkage creator (distinct from the stub linkage type used previously) to
allow targetting a code address target (which will diverge further from
the stub linkage type when we remove the context machine register in
Ignition).
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1882073002
Cr-Commit-Position: refs/heads/master@{#35480}
Removes skips for two tests that no longer fail on windows system.
Updates description of another failing test with more details.
BUG=v8:4280,v8:4680
LOG=N
Review URL: https://codereview.chromium.org/1878893004
Cr-Commit-Position: refs/heads/master@{#35475}
At some point we thought about using this instead of JSToNumber, but now
there doesn't seem to be any reason for this anymore.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1890763002
Cr-Commit-Position: refs/heads/master@{#35469}
This change implements switch as a balanced if/else tree or break table or
hybrid. A lot of asm.js modules are expected to extensively use switch
alongside function tables that can benefit from a better implementation.
BUG=v8:4203
TEST=mjsunit/asm-wasm
R=titzer@chromium.org,bradnelson@chromium.org,ahaas@chromium.org
LOG=N
Review URL: https://codereview.chromium.org/1838973002
Cr-Commit-Position: refs/heads/master@{#35455}
Reland of (https://codereview.chromium.org/1617503003)
* New atomic code stubs for x64, ia32, arm, arm64
* Add convenience functions JumpIfNotValidSmiValue, JumpIfUintNotValidSmiValue
to macro-assembler-ia32 (API based on x64 macro assembler)
* Remove runtime implementation of Atomics.load, the code stub should always be
called instead
* Add new test to mjsunit atomics test; check that Smi values of different
sizes are supported when possible, else fall back to HeapNumbers
These changes were needed to add another codestub:
* Bump kStubMajorKeyBits from 7 to 8
* Reduce ScriptContextFieldStub::kSlotIndexBits from 13 to 12
BUG=v8:4614
LOG=y
TBR=jarin@chromium.org,bmeurer@chromium.org,rodolph.perfetta@gmail.com,machenbach@chromium.org
Review URL: https://codereview.chromium.org/1617503003
Cr-Commit-Position: refs/heads/master@{#35427}
Review URL: https://codereview.chromium.org/1881383003
Cr-Commit-Position: refs/heads/master@{#35453}
- Get rid of fixing up pointers on the main thread
- Get rid of sweeping on the main thread
Instead:
- Record (and process afterwards) slots in parallel
- Add the pages to the concurrent sweeper as pointers have already been fixed
BUG=chromium:581412
LOG=N
TEST=cctest/test-compaction/*
Review URL: https://codereview.chromium.org/1881423003
Cr-Commit-Position: refs/heads/master@{#35451}
Left trimming assumes that nobody other than the JSArray has a reference to the
backing store. Sampling heap profiler may profile the backing store and keep a
reference too it. This reference was never updated on a left-trim, causing a
crash.
R=alph@chromium.org, hpayer@chromium.org, mattloring@google.com
BUG=
Review URL: https://codereview.chromium.org/1885723002
Cr-Commit-Position: refs/heads/master@{#35449}
Operand values in Bytecodes.DecodeBytecodeAndOperands test are encoded
in little endian format. The test calls Bytecodes::Decode function which
reads the operands but the values are byte swapped on big endian
machines. Added big endian encoded data which decodes correctly on BE
machines.
BUG=
Review URL: https://codereview.chromium.org/1881423002
Cr-Commit-Position: refs/heads/master@{#35447}
Reason for revert:
[Sheriff] Roll was reverted. Please fix unused methods, see:
https://codereview.chromium.org/1884913002/https://build.chromium.org/p/tryserver.chromium.win/builders/win_clang/builds/5585/steps/compile%20%28with%20patch%29/logs/stdio
Original issue's description:
> [Atomics] code stubs for atomic operations
>
> * New atomic code stubs for x64, ia32, arm, arm64
> * Add convenience functions JumpIfNotValidSmiValue, JumpIfUintNotValidSmiValue
> to macro-assembler-ia32 (API based on x64 macro assembler)
> * Remove runtime implementation of Atomics.load, the code stub should always be
> called instead
> * Add new test to mjsunit atomics test; check that Smi values of different
> sizes are supported when possible, else fall back to HeapNumbers
>
> These changes were needed to add another codestub:
> * Bump kStubMajorKeyBits from 7 to 8
> * Reduce ScriptContextFieldStub::kSlotIndexBits from 13 to 12
>
> BUG=v8:4614
> LOG=y
>
> Committed: https://crrev.com/10b5febe11b318cfef130abae343183ac862e60d
> Cr-Commit-Position: refs/heads/master@{#35427}
TBR=jarin@chromium.org,bmeurer@chromium.org,rodolph.perfetta@gmail.com,binji@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4614
Review URL: https://codereview.chromium.org/1884883003
Cr-Commit-Position: refs/heads/master@{#35443}
Visit the Optimized Code Map on first call rather than closure creation.
This is useful for escape analysis, and helps upcoming changes to
type feedback gathering.
Adding notry due to crashed builders:
NOTRY=true
BUG=
Committed: https://crrev.com/9336f4cc6d25d39a128176679a70dbd13a6d946e
Cr-Commit-Position: refs/heads/master@{#35395}
Review URL: https://codereview.chromium.org/1670143002
Cr-Commit-Position: refs/heads/master@{#35440}
* New atomic code stubs for x64, ia32, arm, arm64
* Add convenience functions JumpIfNotValidSmiValue, JumpIfUintNotValidSmiValue
to macro-assembler-ia32 (API based on x64 macro assembler)
* Remove runtime implementation of Atomics.load, the code stub should always be
called instead
* Add new test to mjsunit atomics test; check that Smi values of different
sizes are supported when possible, else fall back to HeapNumbers
These changes were needed to add another codestub:
* Bump kStubMajorKeyBits from 7 to 8
* Reduce ScriptContextFieldStub::kSlotIndexBits from 13 to 12
BUG=v8:4614
LOG=y
Review URL: https://codereview.chromium.org/1617503003
Cr-Commit-Position: refs/heads/master@{#35427}
The usage of __attribute__((format(x, y)) was either wrong or missing from multiple functions, leading to erroneous formats. This CL:
- Imports PRINTF_FORMAT macro from Chrome's src/base/compiler-specific.h.
- Uses it appropriately.
- Imports Chrome's base/format_macros.h mainly to fix size_t formats (further cleanup could be done).
- Fixes a bunch of incorrect formats.
Original CL: https://codereview.chromium.org/1869433004
Reverted in: https://codereview.chromium.org/1867383002
Reverted again in: https://codereview.chromium.org/1877823003
Reverts due to non-CQ bots:
- First: v8_win_dbg, v8_win64_dbg, v8_mac_dbg
- Second: gc mole (added to v8_linux_rel_ng for this patch)
R= jochen@chromium.org
TBR= ahaas@chromium.org,bmeurer@chromium.org,yangguo@chromium.org
Review URL: https://codereview.chromium.org/1872203005
Cr-Commit-Position: refs/heads/master@{#35423}
This is a convenience API that an embedder can use to do final checks on
the return value. Note that this creates a new handle and thus defeats
the performance optimization done for ReturnValue - an embedder should
only use this in non-performance critical code paths.
BUG=
R=verwaest@chromium.org
Review URL: https://codereview.chromium.org/1875263003
Cr-Commit-Position: refs/heads/master@{#35409}
Reason for revert:
Blocks roll. See https://codereview.chromium.org/1877003002/ for detailed messages.
You should be able to repro this with Linux ASAN.
Original issue's description:
> Visit the Optimized Code Map on first call rather than closure creation.
>
> This is useful for escape analysis, and helps upcoming changes to
> type feedback gathering.
>
> BUG=
>
> Committed: https://crrev.com/9336f4cc6d25d39a128176679a70dbd13a6d946e
> Cr-Commit-Position: refs/heads/master@{#35395}
TBR=mstarzinger@chromium.org,bmeurer@chromium.org,mvstanton@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1878063004
Cr-Commit-Position: refs/heads/master@{#35404}
Reason for revert:
Did not fail on another roll including this CL ..
Original issue's description:
> Revert of [compiler] Make feedback vector cope with flag changes. (patchset #1 id:1 of https://codereview.chromium.org/1869693003/ )
>
> Reason for revert:
> Blocks current roll: https://codereview.chromium.org/1876713002/ according to bisect: https://codereview.chromium.org/1872353002/#ps80001
>
> Original issue's description:
> > [compiler] Make feedback vector cope with flag changes.
> >
> > This fixes corner cases where the layout of feedback vectors baked into
> > the snapshot is different from the expected layout, depending on some
> > runtime flags. We make sure the feedback vector is regenereated for
> > functions that are not compiled. Flag changes of this kind are only
> > allowed when code is not serialized.
> >
> > An alternative solution would be to not serialize the feedback vector
> > for such cases in the first place. That solution however would have a
> > higher overhead, as it would required the serializer to be able to
> > recognize feedback vectors while generating a snapshot.
> >
> > R=mvstanton@chromium.org
> > TEST=mjsunit/regress/regress-crbug-600995
> > BUG=chromium:600995
> > LOG=n
> >
> > Committed: https://crrev.com/460bff5fb6af2bd79e610f89afdf6da9dba3cf0c
> > Cr-Commit-Position: refs/heads/master@{#35339}
>
> TBR=mvstanton@chromium.org,mstarzinger@chromium.org
>
> BUG=chromium:600995
> LOG=N
> NOTRY=true
>
> Committed: https://crrev.com/78049e9c4837f053575d6c71e53ae12fec99f1aa
> Cr-Commit-Position: refs/heads/master@{#35392}
TBR=mvstanton@chromium.org,mstarzinger@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:600995
Review URL: https://codereview.chromium.org/1876973002
Cr-Commit-Position: refs/heads/master@{#35398}
This is useful for escape analysis, and helps upcoming changes to
type feedback gathering.
BUG=
Review URL: https://codereview.chromium.org/1670143002
Cr-Commit-Position: refs/heads/master@{#35395}
Reason for revert:
Blocks current roll: https://codereview.chromium.org/1876713002/ according to bisect: https://codereview.chromium.org/1872353002/#ps80001
Original issue's description:
> [compiler] Make feedback vector cope with flag changes.
>
> This fixes corner cases where the layout of feedback vectors baked into
> the snapshot is different from the expected layout, depending on some
> runtime flags. We make sure the feedback vector is regenereated for
> functions that are not compiled. Flag changes of this kind are only
> allowed when code is not serialized.
>
> An alternative solution would be to not serialize the feedback vector
> for such cases in the first place. That solution however would have a
> higher overhead, as it would required the serializer to be able to
> recognize feedback vectors while generating a snapshot.
>
> R=mvstanton@chromium.org
> TEST=mjsunit/regress/regress-crbug-600995
> BUG=chromium:600995
> LOG=n
>
> Committed: https://crrev.com/460bff5fb6af2bd79e610f89afdf6da9dba3cf0c
> Cr-Commit-Position: refs/heads/master@{#35339}
TBR=mvstanton@chromium.org,mstarzinger@chromium.org
BUG=chromium:600995
LOG=N
NOTRY=true
Review URL: https://codereview.chromium.org/1876103002
Cr-Commit-Position: refs/heads/master@{#35392}
We had exactly one test case for --noturbo-types, so it's likely that
the generic pipeline (without types) was already broken for quite some
time, plus no one expressed interest in maintaining it, plus it
complicates the JSGenericLowering integration. So decision is to kill
it.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1872333002
Cr-Commit-Position: refs/heads/master@{#35387}
Function bindings are the only variables in LEGACY_CONST mode.
(https://codereview.chromium.org/1819123002/). Since these variables
can also be accessed in strict mode functions we should support
handling such variables. Assigning to a legacy constant throws
a TypeError in strict mode. Also fixes hydrogen.cc to throw a
TypeError for legacy constants.
BUG=v8:4280,chromium:599068
LOG=N
TBR=rmcilroy@chromium.org
Review URL: https://codereview.chromium.org/1845223006
Cr-Commit-Position: refs/heads/master@{#35383}
Enabled big endian testing for MIPS32 and MIPS64. The tests are also
adapted for big endian variant.
TEST=cctest/test-assembler-mips[64]
BUG=
Review URL: https://codereview.chromium.org/1867503002
Cr-Commit-Position: refs/heads/master@{#35369}
Reason for revert:
One small issue easily fixed here: https://codereview.chromium.org/1867333003/
But it looks like MSVS 2013 doesn't like some of the formats and exists with the unhelpful:
Stderr:
f:\dd\vctools\crt\crtw32\stdio\output.c(1125) : Assertion failed: ("Incorrect
format specifier", 0)
It's easier to revert for now, I'll dig more into the docs:
https://msdn.microsoft.com/en-us/library/56e442dc(v=vs.120).aspxhttps://msdn.microsoft.com/en-us/library/tcxf1dw6(v=vs.120).aspx
And then resubmit, making sure I run these bots.
Original issue's description:
> Fix printf formats
>
> The usage of __attribute__((format(x, y)) was either wrong or missing from multiple functions, leading to erroneous formats. This CL:
>
> - Imports PRINTF_FORMAT macro from Chrome's src/base/compiler-specific.h.
> - Uses it appropriately.
> - Imports Chrome's base/format_macros.h mainly to fix size_t formats (further cleanup could be done).
> - Fixes a bunch of incorrect formats.
>
> R= jochen@chromium.org, bmeurer@chromium.org, yangguo@chromium.org, ahaas@chromium.org
>
> Committed: https://crrev.com/6ebf9fbb93d31f9be41156a3325d58704ed4933d
> Cr-Commit-Position: refs/heads/master@{#35365}
TBR=jochen@chromium.org,bmeurer@chromium.org,yangguo@chromium.org,ahaas@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1867383002
Cr-Commit-Position: refs/heads/master@{#35366}
The usage of __attribute__((format(x, y)) was either wrong or missing from multiple functions, leading to erroneous formats. This CL:
- Imports PRINTF_FORMAT macro from Chrome's src/base/compiler-specific.h.
- Uses it appropriately.
- Imports Chrome's base/format_macros.h mainly to fix size_t formats (further cleanup could be done).
- Fixes a bunch of incorrect formats.
R= jochen@chromium.org, bmeurer@chromium.org, yangguo@chromium.org, ahaas@chromium.org
Review URL: https://codereview.chromium.org/1869433004
Cr-Commit-Position: refs/heads/master@{#35365}
The parser should never need to look at the underlying closure object,
hence the field can be moved from ParseInfo into CompilationInfo.
R=rossberg@chromium.org
Review URL: https://codereview.chromium.org/1863083002
Cr-Commit-Position: refs/heads/master@{#35358}
AddInt + WordShl cases can be optimized on MIPS and this CL contains
tests for those special cases. These test also must be passed on other
architectures.
BUG=
Review URL: https://codereview.chromium.org/1867923002
Cr-Commit-Position: refs/heads/master@{#35349}
This fixes corner cases where the layout of feedback vectors baked into
the snapshot is different from the expected layout, depending on some
runtime flags. We make sure the feedback vector is regenereated for
functions that are not compiled. Flag changes of this kind are only
allowed when code is not serialized.
An alternative solution would be to not serialize the feedback vector
for such cases in the first place. That solution however would have a
higher overhead, as it would required the serializer to be able to
recognize feedback vectors while generating a snapshot.
R=mvstanton@chromium.org
TEST=mjsunit/regress/regress-crbug-600995
BUG=chromium:600995
LOG=n
Review URL: https://codereview.chromium.org/1869693003
Cr-Commit-Position: refs/heads/master@{#35339}
As originally implemented, a SingleNameBinding within a BindingPattern
was incorrectly interpreted as an assignment if an initializer was
present and that initializer was itself an AssignmentExpresion.
For example:
let x;
{ let [x = y = 1] = []; }
print(x); // expected: undefined, actual: 1
Extend the heuristic that detects the "context" of a destructuring
pattern to account for AssignmentExpressions within SingleNameBindings.
BUG=v8:4891
LOG=N
R=adamk@chromium.org
Review URL: https://codereview.chromium.org/1859423002
Cr-Commit-Position: refs/heads/master@{#35334}
Pushing undefined onto a FAST_DOUBLE_ARRAY does not enforce the right representation checks.
BUG=chromuim:599089
LOG=n
Review URL: https://codereview.chromium.org/1868973002
Cr-Commit-Position: refs/heads/master@{#35332}
Nothing too important, but it helps localizing the cause of an error
much faster.
By the way, I also changed the output for assertThrows and
assertDoesNotThrow a bit.
All new arguments are optional, so everything is backwards compatible.
R=jfb@chromium.org, titzer@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1866693002
Cr-Commit-Position: refs/heads/master@{#35322}
We have to preserve control flow so that the liveness analysis is less
confused. This CL fixes loops to preserve teh original control flow.
BUG=chromium:599710
LOG=n
Review URL: https://codereview.chromium.org/1863123002
Cr-Commit-Position: refs/heads/master@{#35318}
If no objects allocated at a location are live when a profile is
collected we report a zero count sample. This is confusing to those
looking at the profiles and will leak memory.
We now delete allocations once the number of sampled live objects for
that location reaches zero.
R=ofrobots@google.com
BUG=
Review URL: https://codereview.chromium.org/1828333002
Cr-Commit-Position: refs/heads/master@{#35305}
- MemoryAllocator is now part of Heap
- CodeRange is now part of MemoryAllocator
BUG=chromium:581076
LOG=N
Review URL: https://codereview.chromium.org/1862653002
Cr-Commit-Position: refs/heads/master@{#35294}
This particularly changes the StackTraceFrameIterator such that is not
only returs JavaScriptFrames, but also WasmFrames. Because of that,
some methods (Summarize, function, receiver) were pulled up to the
StandardFrame, with specializations in JavaScriptFrame and WasmFrame.
R=jfb@chromium.org, titzer@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1861283002
Cr-Commit-Position: refs/heads/master@{#35293}
1) I moved the implementations of the wrapper functions into a new cc
file so that I can use these wrapper functions in tests.
2) I made a generic test for all tests in
test-run-calls-to-external-references.cc. In the new test we only
compare the result of a function call through an external reference with
the result of a direct function call. This is sufficient because we only
want to test function calls through external references work here.
The implementation of these functions are tested somewhere else.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1853123002
Cr-Commit-Position: refs/heads/master@{#35289}
Introduce a ResumeGeneratorTrampoline, which does the actual stack state
reconstruction (currently always restores a fullcodegen frame), and
introduce appropriate TurboFan builtins for %GeneratorPrototype%.next,
%GeneratorPrototype%.return and %GeneratorPrototype%.throw based on
this native builtin.
Also unify the flooding in case of step-in to always work based on
JSFunction and remove the special casing for JSGeneratorObject.
R=mstarzinger@chromium.org, neis@chromium.orgTBR=rossberg@chromium.org
BUG=chromium:513471
LOG=n
Review URL: https://codereview.chromium.org/1865833002
Cr-Commit-Position: refs/heads/master@{#35283}
Anotates bytecodes with a description of how each uses the accumulator.
Validates annotations and uses of accumulator when generating bytecode
handlers.
Only prints the accumulator during tracing where used.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1852213002
Cr-Commit-Position: refs/heads/master@{#35281}
The parser eagerly rewrites destructuring assignments occuring
in formal parameter initializers, because not doing so would
cause the BindingPattern rewriting to be confused and do the
wrong thing.
This change prevents this rewriting from descending into the
bodies of lazily parsed functions.
In general, it's a mistake to descend into the bodies of function
literals anyways, since they are rewritten separately on their
own time, so there is no distinction made between lazily
"throw away" eagerly parsed functions in the temporary parser
arena, or "real" eagerly parsed functions that will be compiled.
BUG=chromium:594084, v8:811
LOG=N
R=adamk@chromium.org, littledan@chromium.org
Review URL: https://codereview.chromium.org/1864553002
Cr-Commit-Position: refs/heads/master@{#35277}
Previously, CreateDataProperty would fail a DCHECK when used to create
an integer indexed property on a TypedArray. This patch makes it throw
a TypeError instead. The issue came up when Array.prototype.concat
was repaired to use CreateDataProperty rather than SetElement; concat
can be tricked into making a new TypedArray if it is given an Array
whose prototype is a TypedArray. This patch prevents the issue.
R=adamk
LOG=Y
BUG=chromium:596394
Review URL: https://codereview.chromium.org/1821723004
Cr-Commit-Position: refs/heads/master@{#35271}
This makes sure the SharedFunctionInfo is available whenever we evaluate
the UseIgnition predicate. This makes sure we can apply filters properly
even when the interpreter causes eager compilation (instead of lazy).
R=rmcilroy@chromium.org
Review URL: https://codereview.chromium.org/1860943002
Cr-Commit-Position: refs/heads/master@{#35263}
Because the operands in this test are encoded in little endian format.
Therefore, their bytes are all swapped when reading them on big endian machine.
R=mbrandy@us.ibm.com,joransiu@ca.ibm.com,titzer@chromium.org,machenbach@chromium.org,bradnelson@chromium.org,ahaas@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1858793002
Cr-Commit-Position: refs/heads/master@{#35262}
This change removes the large contiguous backing store from the young generation
and replaces it regular pages.
We keep a pool of pages that are committed/uncommitted to avoid creating virtual
memory maps during growing and shrinking.
BUG=chromium:581412
LOG=N
Review URL: https://codereview.chromium.org/1853783002
Cr-Commit-Position: refs/heads/master@{#35261}
In simplified numbering, we make sanity checks based on types (e.g.,
NumberSubtract should take numbers as inputs), but this can be
violated if optimization passes make types less precise.
In this CL, we fix load elimination to make sure that types are
smaller in the store -> load elimination by taking an intersection
of the load's type with the store value's type and inserting a guard
with that type. Note that the load type comes from type feedback, so
it can be disjoint from the stored value type (in that case, this
must be dead code because the map chack for the load should prevent
us from using the stored value).
BUG=chromium:599412
LOG=n
Review URL: https://codereview.chromium.org/1857133003
Cr-Commit-Position: refs/heads/master@{#35259}
If we use ScopeIterator inside a debug-evaluate call, we may iterate
over a debug-evaluate context that we created for the debug-evaluate
call. This may trigger assertions.
The solution is to have the ScopeIterator hide debug-evaluate contexts
by unwrapping it if it comes across any.
R=cbruni@chromium.org
BUG=chromium:599662
LOG=N
Review URL: https://codereview.chromium.org/1859033002
Cr-Commit-Position: refs/heads/master@{#35258}
There were a couple of issues with it:
- interpreter is not supported
- the source position was just accidentally correct for full-codegen
- the eval origin could have been cached
Also fixes a few other places to use AbstractCode.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1854713002
Cr-Commit-Position: refs/heads/master@{#35257}
When seeing a rest pattern, we used to get the remaining elements from the
iterator by calling %concat_iterable_to_array on it. This was wrong because it
caused an observable [[Get]] for @@iterator (which the iterator may not even
provide).
This CL gets rid of the call to %concat_iterable_to_array and does the iteration
manually in a simple while-loop. It also gets rid of %concat_iterable_to_array
itself because there aren't any other uses of it.
BUG=v8:4759
LOG=n
R=adamk@chromium.org
Review URL: https://codereview.chromium.org/1852703002
Cr-Commit-Position: refs/heads/master@{#35251}
The background here is that graphs generated from WASM are not trimmed.
That means there can be some floating control diamonds that are not
reachable from end. An assertion in the scheduler for phis from floating
diamonds checks that the use edge in this situation is the control edge,
but in general, any edge could cause this.
Scheduling still works without this assertion. The longer term fix
is to either trim the graphs (more compile time overhead for WASM)
or improve the scheduler's handling of dead code in the graph. Currently
it does not schedule dead code but the potential use positions of
dead code are used in the computation of the common dominator of uses. We could
recognize dead nodes in PrepareUses() and check in GetBlockForUse()
as per TODO.
R=bradnelson@chromium.org, mstarzinger@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1846933002
Cr-Commit-Position: refs/heads/master@{#35245}
Run_Wasm_F32CopySign was failing because function copysign
that is used to verify the results does implicit conversion
from float to double. In this conversion we lose information
about NaN sign and the test fails.
Fix by using copysignf to avoid unnecessary float to double
conversion.
TEST=cctest/test-run-wasm/Run_Wasm_F32CopySign
BUG=
Review URL: https://codereview.chromium.org/1857753002
Cr-Commit-Position: refs/heads/master@{#35237}
This fixes a corner case where the generator function of a suspended
generator has been marked for optimization. We assume the optimization
approach will cause a bailout because generators are not optimized. But
resuming is more resilient by always activating the unoptimized code.
R=neis@chromium.org,bmeurer@chromium.org
TEST=mjsunit/regress/regress-crbug-513471
BUG=chromium:513471
LOG=n
Review URL: https://codereview.chromium.org/1856683002
Cr-Commit-Position: refs/heads/master@{#35234}
The parser uses a try-catch in order to record when the client of an iterator
throws. The exception then used to get rethrown via 'throw', which
unfortunately resulted in the original exception message object getting
overwritten.
This CL solves this as follows:
- add a clear_pending_message flag to TryCatchStatement (set to true in normal
cases),
- set clear_pending_message to false for the TryCatchStatement used in iterator
finalization
- change full-codegen, turbofan, and the interpreter to emit the ClearPendingMessage call
only when the flag is set,
- replace 'throw' with '%ReThrow' in the iterator finalization code, thus
reusing the (not-cleared) pending message
R=littledan@chromium.org, mstarzinger@chromium.org, yangguo@chromium.org
BUG=v8:4875
LOG=n
Review URL: https://codereview.chromium.org/1842953003
Cr-Commit-Position: refs/heads/master@{#35226}
- RegExp.prototype.toString() doesn't have any special handling of
RegExp instances and simply calls the source and flags getters
- Use the original values of global and sticky, rather than based
on the current flag getters, as specified in
https://github.com/tc39/ecma262/pull/494R=yangguo@chromium.org,adamk
LOG=Y
BUG=v8:4602
Review URL: https://codereview.chromium.org/1846303002
Cr-Commit-Position: refs/heads/master@{#35225}
This allows us to remove the troublesome %_MathClz32 intrinsic and also
allows us to utilize the functionality that is already available in
TurboFan. Also introduce a proper NumberClz32 operator so we don't need
to introduce a machine operator at the JS level.
R=epertoso@chromium.org
Review URL: https://codereview.chromium.org/1852553003
Cr-Commit-Position: refs/heads/master@{#35208}
Handles bytecodeArray Objects when verifying the heap and also when
collecting code statistics. The changes include:
1. BytecodeArrays could be a part of the large object space. When
verifying the large object space we should also allow BytecodeArray
objects.
2. Adds support for BytecodeArrays when collecting code statistics.
BUG=v8:4280,chromium:599001
LOG=N
Review URL: https://codereview.chromium.org/1850443006
Cr-Commit-Position: refs/heads/master@{#35202}
Improves code coverage of bytecode array builder and constant
array builder.
Fixes initial index for constant pool slice for kQuad operands.
BUG=v8:4280,chromium:599000
LOG=N
TBR=rmcilroy@chromium.org
Review URL: https://codereview.chromium.org/1845313002
Cr-Commit-Position: refs/heads/master@{#35201}
Reason for revert:
breaks some chromium browser_tests: https://codereview.chromium.org/1848233002/
Original issue's description:
> Ship --harmony-regexp-exec
>
> There are still spec compliance fixes to be made, but this patch
> turns the flag to shipping to make sure we get more canary coverage
> and performance data from the bots.
>
> BUG=v8:4602
> LOG=y
>
> Committed: https://crrev.com/84492bb66b340f4e0df36758e98fddbb10b5d1dc
> Cr-Commit-Position: refs/heads/master@{#35181}
TBR=littledan@chromium.org,adamk@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4602
Review URL: https://codereview.chromium.org/1852673003
Cr-Commit-Position: refs/heads/master@{#35198}
We expect that the majority of malloc'd memory held by V8 is allocated
in Zone objects. Introduce an Allocator class that is used by Zones to
manage memory, and allows for querying the current usage.
BUG=none
R=titzer@chromium.org,bmeurer@chromium.org,jarin@chromium.org
LOG=n
TBR=rossberg@chromium.org
Review URL: https://codereview.chromium.org/1847543002
Cr-Commit-Position: refs/heads/master@{#35196}
This CL ensures that we build environments/frame states so that tail caller frame will never become topmost.
BUG=chromium:598998, v8:4698
LOG=N
Review URL: https://codereview.chromium.org/1849503002
Cr-Commit-Position: refs/heads/master@{#35188}
The HandlerCompiler did not properly handle the weird edge case when a
sloppy mode function was installed as an accessor on one of the value
wrapper prototypes and then accessed via a load from a primitive value.
In this case we just passed the primitive value untouched instead of
properly wrapping it first. The CallFunction builtin properly deals with
all the funny edge cases, so we use it instead of duplicating almost all
of the logic here (the performance difference is neglible).
R=verwaest@chromium.org
BUG=chromium:599073, v8:4413
LOG=n
Review URL: https://codereview.chromium.org/1845243005
Cr-Commit-Position: refs/heads/master@{#35187}
There are still spec compliance fixes to be made, but this patch
turns the flag to shipping to make sure we get more canary coverage
and performance data from the bots.
BUG=v8:4602
LOG=y
Review URL: https://codereview.chromium.org/1847103002
Cr-Commit-Position: refs/heads/master@{#35181}
Reason for revert:
TC39 decided that this compatibility fix should be standardized.
Original issue's description:
> Remove RegExp.prototype.source getter compat workaround
>
> The getter RegExp.prototype.source is specified in ES2015 to throw when
> called on a non-RegExp instance, such as RegExp.prototype. We had previously
> put in a compatibility workaround for all RegExp getters to make them
> throw on access specifically with RegExp.prototype as the receiver; however,
> we only have evidence that this is needed for properties other than source.
> This patch removes the compatibility workaround for get RegExp.prototype.source
> and gives it semantics precisely as per the ES2015 specification.
>
> R=adamk
> BUG=chromium:581577,v8:4827
> LOG=Y
>
> Committed: https://crrev.com/80803aa89e31839b8f73959776fa7e1923c6b461
> Cr-Commit-Position: refs/heads/master@{#35086}
R=adamk@chromium.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
BUG=chromium:581577,v8:4827
LOG=Y
Review URL: https://codereview.chromium.org/1847783003
Cr-Commit-Position: refs/heads/master@{#35180}
*) For all tests the input validation was incorrect, i.e. some values
were considered invalid although they were valid. The problem was that
values which are outside int range can get in range through truncation.
*) Removed an assertion in the x64 code generation of
TruncateFloat64ToUint32 which trapped on negative inputs.
*) Introduced a new TF operator TruncateFloat32ToUint32 which does
the same as ChangeFloat32ToUint32 but does not trap on negative inputs.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1843983002
Cr-Commit-Position: refs/heads/master@{#35176}
In the earlier implementation of GenerateDoubleToObject the context
is loaded from the parent's frame. rsi is clobbered because it is used
to store kHoleNan constnat. It is not always safe to peek at
the parents frame. Bytecode handlers have TypedFrame and the type of
frame is stored at FP + 1. GenerateDoubleToObject expects context
to be store at that place. In the current implementation rsi is pushed
onto the stack and is popped when exiting this function.
BUG=v8:4280,chromium:597565
LOG=N
Review URL: https://codereview.chromium.org/1848473002
Cr-Commit-Position: refs/heads/master@{#35163}
Test case objects were sorted without key function, resulting
in random sort order. On sharded builds, the shards are
determined by the sort order and rely on a deterministic
sorting. This led to random cctest and unittest cases being
dropped or executed twice on sharded testers.
TBR=jkummerow@chromium.org, hablich@chromium.org
Review URL: https://codereview.chromium.org/1842673002
Cr-Commit-Position: refs/heads/master@{#35151}
If a script is unloaded between the collection of an allocation and the
tranlation of an allocation profile, the profiler will segfault. With
this change, we report unloaded scripts as having no line number,column
number, or name.
R=ofrobots@google.com
BUG=
Review URL: https://codereview.chromium.org/1846723002
Cr-Commit-Position: refs/heads/master@{#35147}
Migrate Math.ceil, Math.round and Math.trunc to TurboFan code stubs,
similar to what we did with Math.floor, and make these builtins properly
optimizable in TurboFan via appropriate simplified operators NumberCeil,
NumberRound and NumberTrunc, which are intended to be reusable for
ToInteger and ToLength optimizations that will be done in a followup CL.
Also allows us to kill the funky %RoundNumber runtime function, which
was quite heavy.
Improve test coverage for Math.ceil and Math.trunc a lot, especially
making sure that we also properly trigger the TurboFan builtin reducer
case.
R=jarin@chromium.org
BUG=v8:4059
LOG=n
Review URL: https://codereview.chromium.org/1841993002
Cr-Commit-Position: refs/heads/master@{#35135}
Int64Mul is lowered to a new turbofan operator, Int32MulPair. The new
operator takes 4 inputs an generates 2 outputs. The inputs are the low
word of the left input, high word of the left input, the low word of the
right input, and high word of the right input. The ouputs are the low
and high word of the result of the multiplication.
R=titzer@chromium.org, v8-arm-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1807273002
Cr-Commit-Position: refs/heads/master@{#35131}
Debugger fetches the return value of a function when we break at return.
Interpreter holds the return value in accumulator. This is not stored in a
specified location on stack and hence it is not possible to look it up from
stack similar to full-codegen or optimized frames. This cl adds support to
store the value of accumulator on debug breaks. The value of accumulator is
passed to the runtime function and is then stored in thread local data.
Also changes full-codegen implementation to match that of ignition.
The return value from full-codegen is also stored in thread local data.
The return value is fetched directly thread local data instead of
finding it by iterating over frames.
BUG=v8:4280, v8:4690
LOG=N
Review URL: https://codereview.chromium.org/1842683002
Cr-Commit-Position: refs/heads/master@{#35127}
The new implementation deals with cycles in the TF graph in two steps:
1) The lowering of phis is delayed to avoid cyclic dependencies.
2) The replacement nodes of phis are created already when the phi is
pushed onto the stack so that other nodes can use these replacements
for their lowering.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1844553002
Cr-Commit-Position: refs/heads/master@{#35126}
This patch adds fast paths for @@replace and @@split that call into
the old, side-effect free (and faster) versions of those builtin
operations when possible (roughly, when the receiver is a RegExp
and the 'exec' method is untampered). Also add some micro-optimizations
that further improve performance.
Taken altogether, this takes us from a ~70% regression on the Octane
RegExp benchmark to a ~9% regression.
The test262.status lines for RegExps has been reorganized to make it
clearer the status of individual tests. More work will likely be
required to increase spec compliance before the --harmony-regexp-exec
flag is shipped; some of that work is happening on the spec side.
BUG=v8:4602
LOG=y
Review URL: https://codereview.chromium.org/1836123002
Cr-Commit-Position: refs/heads/master@{#35118}
This avoids redundant casts, loss of precision, and potential overflows.
BUG=chromium:597310
LOG=NO
Review URL: https://codereview.chromium.org/1841043002
Cr-Commit-Position: refs/heads/master@{#35113}
Now instead of saving all event details in the ring buffer,
we save only the bytes and duration.
This reduces the GCTracer size from 20K to 3K and simplifies code.
BUG=chromium:597310
LOG=NO
Review URL: https://codereview.chromium.org/1830723004
Cr-Commit-Position: refs/heads/master@{#35104}
This fixes another bug in Array.prototype.sort (when the array is not a
JSArray and there is a proxy on the prototype chain).
R=cbruni@chromium.org
BUG=chromium:596866
LOG=n
Review URL: https://codereview.chromium.org/1842563004
Cr-Commit-Position: refs/heads/master@{#35101}
In JavaScript code and stubs, JSSP mirrors the CSP but may be unaligned.
But in WASM code only CSP is used, like native code, and it must be
aligned.
Calls into WASM from JS need to carefully align the C stack
pointer (csp) and restore the previous JSSP, while calls from WASM
to JS need to compute a new JSSP and restore their CSP after the
call.
R=ahaas@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1811283003
Cr-Commit-Position: refs/heads/master@{#35096}
Fix and re-enable the flexible representation for Math.floor (which is used to
implement Math.ceil) and Math.round, which allows Math.floor and Math.round to
return double results instead of int32, and therefore allows values outside
the int32 range, especially -0 is now a valid result, which doesn't deopt.
Also port this feature to x64 and ia32 when the CPU supports the SSE4.1
extension.
This addresses all the known deoptimization loops related to Math.round
in the Kraken benchmark suite, and seems to also address most of the
deoptimization loops related to Math.floor in the Oort Online benchmark.
Drive-by-fix: Import the regression tests for the broken HMathFloorOfDiv
optimization that caused the initial revert of the feature (for arm64 only
back then).
BUG=chromium:476477,v8:2890,v8:4059
R=jarin@chromium.org
LOG=n
Review URL: https://codereview.chromium.org/1841513003
Cr-Commit-Position: refs/heads/master@{#35094}
The getter RegExp.prototype.source is specified in ES2015 to throw when
called on a non-RegExp instance, such as RegExp.prototype. We had previously
put in a compatibility workaround for all RegExp getters to make them
throw on access specifically with RegExp.prototype as the receiver; however,
we only have evidence that this is needed for properties other than source.
This patch removes the compatibility workaround for get RegExp.prototype.source
and gives it semantics precisely as per the ES2015 specification.
R=adamk
BUG=chromium:581577,v8:4827
LOG=Y
Review URL: https://codereview.chromium.org/1837843002
Cr-Commit-Position: refs/heads/master@{#35086}
Previously, they would check for Symbol.match/Symbol.search, and then
do another check for Symbol.match in the RegExp constructor. This patch
avoids the second one by skipping the RegExp constructor, as the spec does.
Review URL: https://codereview.chromium.org/1840723002
Cr-Commit-Position: refs/heads/master@{#35085}
This way we avoid the second deoptimization for the Math.floor and
Math.ceil builtins when -0 is involved. We still deoptimize the inlined
Crankshaft version in various cases, that's a separate issue.
The algorithm used for implement CodeStubAssembler::Float64Floor is
vaguely based on the fast math version used in the libm of various BSDs,
but had to be reengineered to match the EcmaScript specification.
R=epertoso@chromium.org
BUG=v8:2890, v8:4059
LOG=n
Review URL: https://codereview.chromium.org/1828253002
Cr-Commit-Position: refs/heads/master@{#35083}
Add support for optimizing objects with elements, which do not invoke JS and
cannot change the shape of the Object.
BUG=v8:4663
LOG=N
Review URL: https://codereview.chromium.org/1767113004
Cr-Commit-Position: refs/heads/master@{#35081}
It's been on since M49. Also moved tests from harmony -> es6,
one of which was merged with another test of the same name.
While moving stuff over to regexp.js, I also noticed that there
were unused calls to %FunctionSetName and %SetNativeFlag (those
calls are already handled by InstallGetter()).
Review URL: https://codereview.chromium.org/1838563003
Cr-Commit-Position: refs/heads/master@{#35076}
Use macro instructions for min, max ops to get the same functionality on
pre-r6 and r6 targets.
BUG=
TEST=mjsunit/math-min-max, cctest/test-macro-assembler-mips64/min_max_nan, cctest/test-macro-assembler-mips/min_max_nan, cctest/test-assembler-mips64/min_max, cctest/test-assembler-mips/min_max
Review URL: https://codereview.chromium.org/1694833002
Cr-Commit-Position: refs/heads/master@{#35073}
A bug in error printing meant that we failed to do proper type checks
before calling into C++ code, which could lead to RUNTIME_ASSERT
failures if methods are called on alternative receivers. This patch
adds the right type checks.
BUG=chromium:596718
LOG=Y
R=adamk
Review URL: https://codereview.chromium.org/1831053003
Cr-Commit-Position: refs/heads/master@{#35069}
This patch implements ES2015 RegExp subclassing semantics, namely the
hardest part where RegExp.prototype.exec and certain flag getters can
be overridden in order to provide different behavior. This change is
hidden behind a new flag, --harmony-regexp-exec. The flag guards the
behavior by installing entirely different implementations of the
methods which follow the new semantics.
Preliminary performance tests show a 3-4x regression in the Octane
RegExp benchmark. The new code doesn't call out into several fast
paths that the old code supported, so this is expected.
The patch is tested mostly by test262, where most RegExp tests are fixed,
with the exception of deliberate spec violations for web compatibility,
and for the 'sticky' flag, which is not dynamically read by this patch
in all cases but rather statically compiled into the RegExp. The latter
will require a follow-on patch to implement. A small additional set of
tests verifies one particular case, mostly to check whether the flag
mechanism works.
R=adamk,yangguo@chromium.org
LOG=Y
BUG=v8:4602
Review URL: https://codereview.chromium.org/1596483005
Cr-Commit-Position: refs/heads/master@{#35068}
Makes --ignition cause eager compilation if we aren't building the startup
snapshot.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1811553003
Cr-Commit-Position: refs/heads/master@{#35066}
Reason for revert:
[Sheriff] Seems to break nosnap debug:
https://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20nosnap%20-%20debug/builds/6019
Original issue's description:
> [Interpreter] Adds support to fetch return value on break at return.
>
> Debugger fetches the return value of a function when we break at return.
> Interpreter holds the return value in accumulator. This is not stored in a
> specified location on stack and hence it is not possible to look it up from
> stack similar to full-codegen or optimized frames. This cl adds support to
> store the value of accumulator on debug breaks. The value of accumulator is
> passed to the runtime function and is then stored in thread local data.
>
> Also changes full-codegen implementation to match that of ignition.
> The return value from full-codegen is also stored in thread local data.
> The return value is fetched directly thread local data instead of
> finding it by iterating over frames.
>
> BUG=v8:4280, v8:4690
> LOG=N
>
> Committed: https://crrev.com/fb65527b75754bcf3b173f16f5d0b04a1c6d9b99
> Cr-Commit-Position: refs/heads/master@{#35060}
TBR=rmcilroy@chromium.org,yangguo@chromium.org,weiliang.lin@intel.com,balazs.kilvady@imgtec.com,jyan@ca.ibm.com,mythria@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280, v8:4690
Review URL: https://codereview.chromium.org/1834733002
Cr-Commit-Position: refs/heads/master@{#35065}
