These operators are really pure on the JavaScript level, and were only
part of the effect chain to make sure we don't accidentially schedule
them right after raw allocations, which is no longer an issue since we
now have the concept of atomic regions.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1893543004
Cr-Commit-Position: refs/heads/master@{#35552}
This changes closure creation to lower to inline allocations when
possible instead of going through the FastNewClosureStub. It allows us
to leverage all advantages of inline allocations on closures. Note that
it is only safe to embed the raw entry point of the compile lazy stub
into the code, because that stub is immortal and immovable.
R=mvstanton@chromium.org
Review URL: https://codereview.chromium.org/1573153002
Cr-Commit-Position: refs/heads/master@{#35499}
This allows us to remove the turbofan bailout that we introduced
as a response to crbug.com/589792.
BUG=chromium:589792
LOG=n
Review URL: https://codereview.chromium.org/1884713003
Cr-Commit-Position: refs/heads/master@{#35493}
At some point we thought about using this instead of JSToNumber, but now
there doesn't seem to be any reason for this anymore.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1890763002
Cr-Commit-Position: refs/heads/master@{#35469}
In simplified numbering, we make sanity checks based on types (e.g.,
NumberSubtract should take numbers as inputs), but this can be
violated if optimization passes make types less precise.
In this CL, we fix load elimination to make sure that types are
smaller in the store -> load elimination by taking an intersection
of the load's type with the store value's type and inserting a guard
with that type. Note that the load type comes from type feedback, so
it can be disjoint from the stored value type (in that case, this
must be dead code because the map chack for the load should prevent
us from using the stored value).
BUG=chromium:599412
LOG=n
Review URL: https://codereview.chromium.org/1857133003
Cr-Commit-Position: refs/heads/master@{#35259}
The background here is that graphs generated from WASM are not trimmed.
That means there can be some floating control diamonds that are not
reachable from end. An assertion in the scheduler for phis from floating
diamonds checks that the use edge in this situation is the control edge,
but in general, any edge could cause this.
Scheduling still works without this assertion. The longer term fix
is to either trim the graphs (more compile time overhead for WASM)
or improve the scheduler's handling of dead code in the graph. Currently
it does not schedule dead code but the potential use positions of
dead code are used in the computation of the common dominator of uses. We could
recognize dead nodes in PrepareUses() and check in GetBlockForUse()
as per TODO.
R=bradnelson@chromium.org, mstarzinger@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1846933002
Cr-Commit-Position: refs/heads/master@{#35245}
This allows us to remove the troublesome %_MathClz32 intrinsic and also
allows us to utilize the functionality that is already available in
TurboFan. Also introduce a proper NumberClz32 operator so we don't need
to introduce a machine operator at the JS level.
R=epertoso@chromium.org
Review URL: https://codereview.chromium.org/1852553003
Cr-Commit-Position: refs/heads/master@{#35208}
We expect that the majority of malloc'd memory held by V8 is allocated
in Zone objects. Introduce an Allocator class that is used by Zones to
manage memory, and allows for querying the current usage.
BUG=none
R=titzer@chromium.org,bmeurer@chromium.org,jarin@chromium.org
LOG=n
TBR=rossberg@chromium.org
Review URL: https://codereview.chromium.org/1847543002
Cr-Commit-Position: refs/heads/master@{#35196}
Int64Mul is lowered to a new turbofan operator, Int32MulPair. The new
operator takes 4 inputs an generates 2 outputs. The inputs are the low
word of the left input, high word of the left input, the low word of the
right input, and high word of the right input. The ouputs are the low
and high word of the result of the multiplication.
R=titzer@chromium.org, v8-arm-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1807273002
Cr-Commit-Position: refs/heads/master@{#35131}
The new implementation deals with cycles in the TF graph in two steps:
1) The lowering of phis is delayed to avoid cyclic dependencies.
2) The replacement nodes of phis are created already when the phi is
pushed onto the stack so that other nodes can use these replacements
for their lowering.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1844553002
Cr-Commit-Position: refs/heads/master@{#35126}
This way we avoid the second deoptimization for the Math.floor and
Math.ceil builtins when -0 is involved. We still deoptimize the inlined
Crankshaft version in various cases, that's a separate issue.
The algorithm used for implement CodeStubAssembler::Float64Floor is
vaguely based on the fast math version used in the libm of various BSDs,
but had to be reengineered to match the EcmaScript specification.
R=epertoso@chromium.org
BUG=v8:2890, v8:4059
LOG=n
Review URL: https://codereview.chromium.org/1828253002
Cr-Commit-Position: refs/heads/master@{#35083}
This CL adds support for builtins with JavaScript linkage written using
the TurboFan CodeStubAssembler, but with a JSCall descriptor (which was
already supported thanks to a previous patch by Ben Smith). As a first
example, we convert the Math.sqrt builtin and thereby get rid of the
%_MathSqrt intrinsic, which causes trouble for the representation
selection pass in the JavaScript pipeline.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1824993002
Cr-Commit-Position: refs/heads/master@{#34989}
The CL also add guard nodes to places where we assume that certain
values are numbers.
Review URL: https://codereview.chromium.org/1821133002
Cr-Commit-Position: refs/heads/master@{#34977}
This new intrinsic is used by the desugared ES6 instanceof implementation for
the cases when the F[@@hasInstance] property is null or undefined.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1809993002
Cr-Commit-Position: refs/heads/master@{#34866}
Int64Sub is lowered to a new turbofan operator, Int32SubPair. The new
operator takes 4 inputs an generates 2 outputs. The inputs are the low
word of the left input, high word of the left input, the low word of the
right input, and high word of the right input. The ouputs are the low
and high word of the result of the subtraction.
The implementation is very similar to the implementation of Int64Add.
@v8-arm-ports: please take a careful look at the implementation of sbc
in the simulator.
R=titzer@chromium.org, v8-arm-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1778893005
Cr-Commit-Position: refs/heads/master@{#34808}
Word64Popcnt is lowered to Word32Popcnt(low-word) + Word32Popcnt(high_word).
Since the optional Word64Popcnt operator does not exist on 32 bit platforms,
I introduced a new operator "Word64PopcntPlaceholder" which is generated
in the WasmCompiler and then lowered in the Int64Lowering.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1803453003
Cr-Commit-Position: refs/heads/master@{#34777}
Int64Add is lowered to a new turbofan operator, Int32AddPair. The new
operator takes 4 inputs an generates 2 outputs. The inputs are the low
word of the left input, high word of the left input, the low word of the
right input, and high word of the right input. The ouputs are the low
and high word of the result of the addition.
R=titzer@chromium.org, v8-arm-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1778493004
Cr-Commit-Position: refs/heads/master@{#34747}
I64Shl is lowered to a new turbofan operator, WasmWord64Shl. The new
operator takes 3 inputs, the low-word input, the high-word input, and
the shift, and produces 2 output, the low-word output and the high-word
output.
At the moment I implemented the lowering only for ia32, but I think the
CL is already big enough. I will add the other platforms in separate
CLs.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1756863002
Cr-Commit-Position: refs/heads/master@{#34546}
Reason for revert:
Tanks benchmarks (e.g., Octane box2d TF).
Original issue's description:
> [turbofan] Connect ObjectIsNumber to effect and control chains.
>
> In theory, we could connect the nodes when doing
> the schedule-in-the-middle pass, but that would require creating two
> versions of the operator (effectful and pure). I believe we do not
> lose anything by wiring the node up eagerly.
>
> Committed: https://crrev.com/2894e80a0a4a51a0d72e72aa48fcd01968f7949f
> Cr-Commit-Position: refs/heads/master@{#34141}
TBR=bmeurer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1718483002
Cr-Commit-Position: refs/heads/master@{#34147}
In theory, we could connect the nodes when doing
the schedule-in-the-middle pass, but that would require creating two
versions of the operator (effectful and pure). I believe we do not
lose anything by wiring the node up eagerly.
Review URL: https://codereview.chromium.org/1709093002
Cr-Commit-Position: refs/heads/master@{#34141}
This reducer doesn't really add value, because:
(a) it is only concerned with JSCallFunction and JSToNumber, but when
we get to it, all JSCallFunction nodes will have been replaced by
Call nodes, and in the not so far future, we will also have
replaced almost all JSToNumber nodes with better code,
(b) and the reducer tries to be smart and use one of the outermost
contexts, but that might not be beneficial always; actually it
might even create longer live ranges and lead to more spilling
in some cases.
But most importantly, the JSContextRelaxation currently blocks inlining
based on SharedFunctionInfo, because it requires the inliner to check
the native context, which in turn requires JSFunction knowledge. So I'm
removing this reducer for now to unblock the more important inliner
changes.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1715633002
Cr-Commit-Position: refs/heads/master@{#34139}
This removes the language mode parameter from all JSCall operators. The
information is no longer used anywhere and is not threaded through the
interpreter bytecode. We should only thread it through the bytecode if
it has a semantic impact on the compilation.
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1709493002
Cr-Commit-Position: refs/heads/master@{#34073}
Drive-by-fix: Remove the (now) unused %_SetValueOf and %_JSValueGetValue
intrinsics from the various compilers and the runtime.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1698343002
Cr-Commit-Position: refs/heads/master@{#34037}
Support SBFX in the instruction selector for sign-extension patterns like
Sar(Shl(x, a), b), where a and b are immediate values.
BUG=
Review URL: https://codereview.chromium.org/1695293002
Cr-Commit-Position: refs/heads/master@{#34029}
Passing floating point params to/from C has never quite worked correctly,
but we've never enforced the restriction early in the CallDescriptor
creation process because of unittests. Fix unittests to make their own
simple call descriptors and not rely on the C ones.
R=bmeurer@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1701593003
Cr-Commit-Position: refs/heads/master@{#33993}
Improve instruction selector for mask and shift operations by using cheaper
instructions where possible, in preference to UBFX.
Reverted because it was suspected of causing a couple of flaky tests to fail,
but investigation suggests this is unlikely.
Original review: https://codereview.chromium.org/1677023002
BUG=
Review URL: https://codereview.chromium.org/1684073006
Cr-Commit-Position: refs/heads/master@{#33988}
