Two techniques are involved:
- compress repeated line ends (common stack beginnings) by using back references;
- do RLE compression of repeated tick events.
This gives only 5% size reduction on benchmarks run, but this is because tick events are only comprise 10% of file size. Under Chromium winnings are bigger because long repeated samples of idleness are now compressed into a single line.
Tickprocessor will be updated in the next patch.
Review URL: http://codereview.chromium.org/123012
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2147 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
interceptors and dont-delete attributes.
Minor change to the behavior of eval: throw exception when calling
eval in a context for which the global has been detached. This
matches the behavior of both Firefox and Safari post navigation in the
browser.
Review URL: http://codereview.chromium.org/118374
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2118 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
submitted in revisions 2093, 2094, 2099, and 2106.
There's no evidence that supports that these changes
should be the cause of the unexplained performance
regressions on the intl2 and DHTML page cyclers.
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2109 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The problem was I incorrectly treated NULL result as failure to fetch
a property with a getter. However, if getter returns zero, it is
manifested as NULL pointer (see added test case).
Good news: that gives another boost as before this CL if getter returned
0, I did another slow lookup.
Review URL: http://codereview.chromium.org/119172
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2106 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
My assumption that log initialization happens somewhere near the stack's bottom is true for V8's sample shell but isn't true for Chromium, causing many otherwise valid stack addresses to be thrown out. The solution proposed is to save stack pointer value for the outermost JS function in ThreadLocalTop similar to c_entry_fp.
Implemented only for IA-32. Currently I'm not dealing with profiling on ARM and x86-64 anyway.
Review URL: http://codereview.chromium.org/112082
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2086 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
* Running "system" JavaScript with the debug break flag active leads to slow running code while waiting for the break in non "system" JavaScript (one exception to this it is to try to avoid breaks in the clear mirror cache JavaScript code called when leaving the debugger).
* If this happens while processing RegExp running in native code an infinite loop is created as the stack guard handler for RegExp does not move execution forward
Fixed a GC bug in the interrupt handling for RegExp running in native code.
Added test of debug break while in debug message handler callback and debug break while executing a RegExp.
Review URL: http://codereview.chromium.org/115262
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2074 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
When profiler's memory buffer is filled up, profiling is stopped and it is ensured that the last record in the buffer is "profiler,\"pause\"" thus making the end of profiling session explicit. Otherwise DevTools Profiler would need to guess whether the current profiling session has been stopped.
Tested with Chromium.
Review URL: http://codereview.chromium.org/115859
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2072 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The goal of this change is to allow longer profiling sessions and preserve memory when profiler isn't started. The buffer starts with 64K and grows until it reaches the upper limit, which is currently set to 50MB --- according to my evaluations, this is enough for at least 20 minutes of GMail profiling. As we're planning to introduce compression for the profiler log, this time boundary will be significantly increased soon.
To make possible unit testing of the new component, I've factored out Logger's utility classes into a separate source file: log-utils.h/cc. Log and LogMessageBuilder are moved there from log.cc without any semantical changes.
Review URL: http://codereview.chromium.org/115814
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2067 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This issue was raised by Brett Wilson while reviewing my changelist for readability. Craig Silverstein (one of C++ SG maintainers) confirmed that we should declare one namespace per line. Our way of namespaces closing seems not violating style guides (there is no clear agreement on it), so I left it intact.
Review URL: http://codereview.chromium.org/115756
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2038 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This is intended to be used with Chromium. When in resource-saving mode, profiler doesn't consume any resources (sampler and logging is off) until resumed. Then again, when profiler is paused, sampling and logging are turned off.
Tested under Linux and Windows. Also have done preliminary testing with Chromium.
Review URL: http://codereview.chromium.org/113762
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2036 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Without the change the debugger may crash as Debugger::EventActive(v8::Break) called from OnDebugBreak may clear current debugger context.
Also when compilation cache was enabled debugger could fail on second attach for the same reason(see AfterCompileMessageWhenMessageHandlerIsReset).
BUG=12404
Review URL: http://codereview.chromium.org/115709
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2035 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
If was failing because with snapshot the range between minimum and maximum addresses of heap objects is very large (close to 0xf0000000). To fix this I rewrote handling of address maps in the test.
Submitting with TBR because of late time. I think, we'll need to revisit this change tomorrow.
TBR=sgjesse@chromium.org
Review URL: http://codereview.chromium.org/113641
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2019 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The goal is to make possible having --prof flag always enabled in Chromium. Currently we can't do this because --prof causes compiler and gc to log code creations / moves / deletes which aren't needed until we start profiling. With LogCompiledFunctions it will be possible not to log anything until we start profiling. When started, the current map of compiled functions will be logged and compiler / gc logging will be enabled to update current state. When profling is stopped, logging will be turned off again.
Funny that testing code is actually much longer and complex than function code.
Review URL: http://codereview.chromium.org/112036
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2009 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
When loaded scripts are requested this cache is filled with all the script objects in the heap. Hereafter its content is kept in sync with the active scripts in the heap through the notifications of new scripts compiled and by using weak handles to get notified when a script is collected.
Through the tracking of collected scripts the debugger event OnScriptCollected have been added to notify a debugger that a script previously returned through the scripts command is no longer in use.
Make the ComputeIntegerHash globally available.
Moved clearing of the mirror cache to when debugger is really left. Previously recursive invocations of the debugger cause the mirror cache to be cleared causing handles to become either stale or reference other objects.
Review URL: http://codereview.chromium.org/115462
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1988 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This will enable reading profiler log in Chrome. The current implementation of memory buffer is trivial (fixed size buffer, no memory recycling) but enough to start end-to-end DevTools Profiler implementation. Later it will be enhanced.
Review URL: http://codereview.chromium.org/108011
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1870 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
- TARGET, the architecture we will generate code for.
This is brought it from the build system.
- HOST, the architecture our C++ compiler is building for.
This is detected automatically based on compiler defines.
This adds macros for 32 or 64 bit, and cleans up some
include conditionals, etc.
Review URL: http://codereview.chromium.org/99355
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1864 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
NPN_Construct allows a NPObject to be called as a construct. For example, the
test case
var s = new app.Packages.java.lang.Integer(5);
app.Packages.java.lang.Integer is a NPObject, and it implements NPN_Construct.
This fix allows a JSObject created by an API function be called as a construct
if it can be called
as a function. This is done by generating the same code for
var s = new app.Packages.java.lang.Integer(5); as
var s = app.Packages.java.lang.Integer(5);
and the caller handles both case correctly. A more sophiscated fix is to one
extra JSConstructCall
frame and allow CallAsConstructor in Builtin::HandleApiCallAsFunction.
This change itself shouldn't affect the semantic of normal case such as:
var a = {};
var s = new a();
A TypeError exception will be thrown in CALL_NON_FUNCTION (runtime.js).
Another part of fix is in the binding code, V8NPObject, which makes
NPN_InvokeDefault or NPN_Construct
call depending on which function is available.
Review URL: http://codereview.chromium.org/100243
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1837 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The current version is now held in src/version.cc in a number of defines which needs to be modified when changing version.
The following defines make up the version information:
MAJOR_VERSION
MINOR_VERSION
BUILD_NUMBER
PATCH_LEVEL
CANDIDATE_VERSION
The first four are numbers and the fifth is a boolean. Besides these five the define
SONAME
can be used to set a specific soname when building the a shared library (see below). This will most likely be used on stable branches where binary compatibility is ensured between different versions. This define is a string.
This version information is now read by the SCons build to support setting the soname for a Linux shared library. This requires passing the option soname=on to the SCons build.
When soname=on is specified the soname for the shared library can be set in two different ways. Either it will be the full versioned library name (e.g. libv8-1.2.2.so) or a specific soname defined in src/version.cc. Whenever a shared library is build with an soname the filename of the library will hold the full version name (e.g. libv8-1.2.2.so).
I did not update the xcode project with the new files.
BUG=151
Review URL: http://codereview.chromium.org/100104
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1826 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The object delivered to the debug message handler contains additional information on the current break handling the messages.
Clients which require just JSON message parsing can simply get the JSON using the GetJSON message on the message object to still have the previous behaviour.
NewMessageHangler(const v8::Debug::Message& message) {
v8::String::Value val(message.GetJSON());
OldMessageHandler(Vector<uint16_t>(const_cast<uint16_t*>(*val), val.length()));
}
Refactored some of the debugger code to use internal handles instead of API handles. Also changed Object to JSObject is some places.
The access to the active context when the break occurred is still not implemented. I will add this in a new CL, as this one is quite big already.
Review URL: http://codereview.chromium.org/99122
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1811 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The debug message thread was introduced to make it possible to have the message handler callback be called from a different thread than the thread running V8 where the debug event occoured, but it never had any practical use, and prevents providing information to the message handler which is only available from the V8 thread.
In the future any thread decoupling will have do be done by the embedder.
This also removes the queue used for outbound messages.
Renamed the class Message to CommandMessage as it is only used for debugger commands from the client. Related message queue classes has also been renamed.
Review URL: http://codereview.chromium.org/93118
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1788 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
stack pointer to change by more than one in a corner case. If we push
a constant smi larger than 16 bits, we push it via a temporary
register. Allocating the temporary can cause a register to be spilled
from the frame somewhere above the stack pointer.
As a fix, do not use pushes to materialize ranges of elements of size
larger than one.
Review URL: http://codereview.chromium.org/92121
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1785 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
For keyed IC loads setting a break point now ensures that the inlined code is not used. When the break point is set the inlined map check is changed to fail causing the inlined code not to be used but the IC to be called. As long at the break point is set the map check will stay invalid.
Review URL: http://codereview.chromium.org/87025
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1756 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
numerical order independently of the representation of the object.
Exchanged the order of enumeration of integer and string keys so
integer keys are first instead of string keys to better match
WebKit/JSC behavior.
Added test cases that document our enumeration order choice.
Review URL: http://codereview.chromium.org/75035
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1722 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Currently function name inference is wired with AST optimization pass to avoid introducing another pass over AST. A better solution would be to rewrite AST visitors so they can be naturally combined together in a single pass, as their current implementation doesn't allow it.
For examples of cases where function names can be inferred, see the tests file.
Review URL: http://codereview.chromium.org/62146
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1696 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
- Added special cutouts if a Vector has NULL data, which will now happen
if an external string's resource has been deleted.
- Added an verification phase before old gen GC to verify that all real
entries in the SymbolTable are valid symbols.
- Added test that verifies the correct behaviour of the workaround.
Review URL: http://codereview.chromium.org/66011
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1689 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The generic step-in mechanism floods the function called with break points to ensure a break is hit when entering the function. This generic mechanism was also used for function.apply. The code for function.apply contains a keyed load IC which was patched when stepping into function.apply. However function.apply enteres an internal frame not a JavaScript frame. This caused the logic for returning from the break in function.apply to fail as it forced a jump to the IC on the top JavaScript frame. The top JavaScript frame was the frame for the function calling function.apply not the frame for the apply function. Now returning from the break point in the keyed load IC in the apply code caused a jump to the code for the call IC for the function calling function.apply in the first place. Not a pretty sight.
Step-in now handles function.apply as a separate case where the actual JavaScript function called through apply is flodded with breakpoints instead of the function.apply function.
BUG=269
BUG=8210@chromium.org
Review URL: http://codereview.chromium.org/63055
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1683 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Fix exception propagation problem where undefined was returned instead
of an empty handle in case of an exception. This problem can break
C++ programs that are not interested in catching exceptions and just
want to propagate them out by testing for empty handles.
The issue is that exceptions are not rescheduled if they are
externally caught. Externally caught exceptions have to be
rescheduled if there is a JavaScript frame on the way to the C++ frame
that holds the external handler.
A couple of tests will fail on the ARM simulator because the simulator
has separate stacks for C++ and JavaScript. I have marked the tests
as failing only on the simulator.
Review URL: http://codereview.chromium.org/56105
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1657 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Add a semaphore for accessing debugger varaibles which can be changed from a different thread. This is mainly the debug message handler which can be set to NULL to disconnect the debugger.
Control the unloading of the debugger from the V8 thread. Before the debugger unload was called from the thread setting the debug message handler to NULL. This was not safe as this involves calling into V8. This change handles the unloading of the debugger either when entering a debugger event and the debugger was disconnected while the debugger was not active or when leaving the debugger and the debugger was disconnected while the debugger was active.
Add a flag to avoid unloading the debugger if debugger code is used by the application for other purposes than debugging.
Added tests for clearing the debug message handler.
Review URL: http://codereview.chromium.org/56102
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1648 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
- String traversal test data (now in a zone)
- Debug message thread (now joined on exit)
- Threading test threads (now joined on exit)
- Changed message tests framework to cope with valgrind
Also, fixed a bug where we'd try to delete stack-allocated objects
when tearing down v8. Good times.
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1622 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Cleaned up the handling of strings moving, so strings moved by GC and strings changing representation are handled equivalently.
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1562 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
When the debugger agent terminates the used port can be stuck in TIME_WAIT for some time depending on the OS and the state of the socket. With this change will allow the debug agent to start listening on a port still in TIME_WAIT. During development of both V8 and embedding applications this makes it much easier to restart an application using the debugger agent.
This also makes it possible to run the tests involving the debugger agent multiple times without failure.
Review URL: http://codereview.chromium.org/50050
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1558 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
During bind and listen socket errors are now handled. If the listen socket is occoupied the agent will retry its bind operation until success or shutdown.
Added orderly shutdown of the debugger agent both with and without a client connected.
Review URL: http://codereview.chromium.org/50007
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1552 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The code has been compiled and tested on Windows, Linux and Mac OS.
The FreeBSD version is a copy of the Linux version which should work on FreeBSD as well. According to the FreeBSD documentation clock_gettime is part of the standard C library so the assumption is that no additional link libraries is required for FreeBSD.
Review URL: http://codereview.chromium.org/48123
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1526 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Some minor changes, and removed the new handlescope in the inner loop of replace. Only really affects replaces on extremely long strings.
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1524 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This makes it possible to remote debuggers to just add commands to the queue without having to request a break as well. As soon as any JavaScript executes the debugger commands will be processed and the response send to the remote debugger.
Currently hide this behind a flag (--debugger-auto-break) as the current command line debugger in Chrome is not designed for this new behaviour, whereas the new Chrome developer tools will use it.
Review URL: http://codereview.chromium.org/42173
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1508 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Exclude the tests from the threaded tests because I don't want to
disable those on ARM.
The issue is that the simulator keeps the C++ and the JavaScript stack
separated. This is not a problem on the real hardware and the tests
pass on our ARM box.
Review URL: http://codereview.chromium.org/42069
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1492 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
of an empty handle in case of an exception. This problem can break
C++ programs that are not interested in catching exceptions and just
want to propagate them out by testing for empty handles.
The issue is that exceptions are not rescheduled if they are
externally caught. Externally caught exceptions have to be
rescheduled if there is a JavaScript frame on the way to the C++ frame
that holds the external handler.
Review URL: http://codereview.chromium.org/43070
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1487 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Changed the script break points to be able to handle both break points based on script names and script ids. When break points are set through a script id the position is relative to the script itself. This is different from the script break points set through script names where the line/coulmn offset is taken into account.
This has the side effect that function break points are not converted into script break points for named scripts.
Show the script id in the D8 shell debugger when listing all scripts using the 'scripts' command.
Review URL: http://codereview.chromium.org/40317
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1468 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
JavaScriptFrameIterator is templatized on the iterator type and renamed to JavaScriptFrameIteratorTemp.
The original JSFI is now a typedef for JavaScriptFrameIteratorTemp<StackFrameIterator>. Because of templatizing, JSFI code is moved to frames-inl.h
StackTraceFrameIterator moved to frames.*
Implemented SafeStackFrameIterator which wraps StackFrameIterator and have the same interface. It performs additional checks of stack addresses prior to delegating to StackFrameIterator. SafeSFI is used in an another specialization of JavaScriptFrameIteratorTemp template to perform safe JS frames iteration on sampler ticks.
I haven't took an advantage of having multiple stack frames in tickprocessor yet.
Review URL: http://codereview.chromium.org/39009
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1404 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The new Socket class is an encapsulation of the standard BSD socket API. As it depends on platform specific include files and have some slight platform variations it is part of the platform code.
On Mac OS only the option SO_REUSEADDR is set to true for server sockets. Running the test required it as the bound listener socket would sometimes end up in TIME_WAIT. On Windows and Linux this has never been observed (given the client end of the socket is closed before the server end).
The code has been tested on Windows, Linux and Mac OS. The FreeBSD version is a copy of the Linux version but has not been compiled nor tested.
Missing Xcode project updates.
Review URL: http://codereview.chromium.org/27085
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1349 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Add the ability to have the host embedding V8 receive a callback in the V8 thread while V8 is processing a debug callback. When V8 is processing a debug callback the thread where V8 is executing is sitting in a tight loop processing debug commands until the continue command has been executed. In some embedding situations it is beneficial to be able to call back into the embedding host from the thread where V8 is sitting. The might have functions which needs to be called to complement the JavaScript debugging.
Using the uint16_t array to pass a void* is a temporary hack.
Review URL: http://codereview.chromium.org/20491
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1318 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Added a number of handle scopes to the debugger code to keep handles local to the function using them.
Fixed SetDebugEventListener to actually unregister when passed a NULL pointer. Previously this NULL pointer was wrapped in a Proxy.
BUG=1242702
Review URL: http://codereview.chromium.org/21347
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1269 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
decimal escape be accepted as a capture index.
We introduce a limit on the nubmer of allowed captures in a regexp, and break off
parsing of the decimal escape at that point.
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1189 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Changed the name of Runtime_GetPrototype to Runtime_DebugGetPrototype to indicate that it is a debugger related function and changed its implementation to do the correct __proto__ lookup.
Added some more information to the Map debug print.
Review URL: http://codereview.chromium.org/18658
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1126 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Added quoting of the name of the ref property using {"ref":1} instead of {ref:1}. The Chrome C++ JSON parser implementation requires quoted property names.
Changed the JSON format for non finite numbers. The previous formatting using NaN, Infinite and -Infinite caused the Chrome C++ JSON parser implementation to fail. Values "NaN", "Infinite" and "-Infinite" (incuding quotes) are now used.
Reverted changes to DebugLookupResultValue (runtime.cc) from http://codereview.chromium.org/17377. The change caused callback into Chrome with the current V8 context expected to have a DOM Window global object. This is not the case when the debugger context is the active context. This causes properties from interceptors and accessors to be reported as undefined in the debugger.
Review URL: http://codereview.chromium.org/18194
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1101 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
instead of normal JSObjects.
This ensures that __proto__ and accessors on the Object prototype do
not interfere with catch scopes. Also, it fixes the bug that catch
variables were not DontDelete (issue 74).
Next step is to create special lookup routines for context extension
objects and remove the special handling of context extension objects
from the general javascript object lookup routines.
Review URL: http://codereview.chromium.org/18143
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1091 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The problem is that Disable/EnableAccessCheck on an object may chnage its constructor's behavior
if object's map is the same as constructor's initial map. By copying maps, the constructor's
initial map is not changed.
Review URL: http://codereview.chromium.org/18067
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1087 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Properties from interceptors are also reflected through PropertyMirror as the distinction did not make sense seen from a JavaScript debugging perspective. The isNative function on a PropertyMirror can be used to check whether a property is defined natively by the host (or V8).
Simplified the local property lookup in the debug runtime call to just call GetProperty as the property is known to be a local property.
Review URL: http://codereview.chromium.org/17377
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1068 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
calling a stub. The map to check against is unknown when generating
the code, so we patch the map check in the IC initialization code.
Loop nesting is currently not tracked on ARM. I'll file feature
request bug reports for implementing this on ARM and add the number to
the TODOs before I commit.
Review URL: http://codereview.chromium.org/16409
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@1015 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
- Removed the potential for a NULL pointer access in
ContextSwitcher::PreemptionReceived.
- Removed a leak of the semaphore in the ContexSwitcher thread, by removing
the need for this semaphore entirely.
- Added a regression test case which will catch accesses to the ContextSwitcher
singleton after it has been stopped.
Review URL: http://codereview.chromium.org/14483
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@994 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
