This removes the iteration protocol from the parser entirely, and opens
up future possibilities for more bytecodes implementing the various
functions of the protocol.
Change-Id: I316b8a92434d3b5f47927408a235ddaecd65d5bb
Reviewed-on: https://chromium-review.googlesource.com/c/1403125
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#58795}
i64 values can be up to 20 characters long (19 + sign), plus we need
one character for the terminating null character. Thus the previous 18
needs to be increased to 21.
Also extend the test to check the longest possible i64 values.
R=ahaas@chromium.orgCC=kozyatinskiy@chromium.org
Bug: v8:8644
Change-Id: Ia9458db162a55dd57b5e8bc7cf7db73c3bab4734
Reviewed-on: https://chromium-review.googlesource.com/c/1404443
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#58724}
This CL disables RX (read and execute) permissions for Code memory
when in jitless mode. All memory that was previously allocated RX
is now read-only.
Bug: v8:7777
Cq-Include-Trybots: luci.v8.try:v8_linux_arm_lite_rel_ng
Change-Id: I52d6ed785d244ec33168a02293c5506d26f36fe8
Reviewed-on: https://chromium-review.googlesource.com/c/1390122
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#58692}
Emit a single destructuring assignment for destructuring declarations,
which can be desugared by the bytecode generator. This allows us to
remove destructuring desugaring from the parser (specifically, the
pattern rewriter) entirely.
The pattern "rewriter" is now only responsible for walking the
destructuring pattern to declare variables, mark them assigned, and
potentially rewrite scopes for the edge case of parameters with a sloppy
eval.
Note that since the rewriter is no longer rewriting, we have to flip the
VariableProxy copying logic for var re-lookup, so that we now pass the
new VariableProxy to the variable declaration and leave the original
unresolved (rather than passing the original through and rewriting to a
new unresolved VariableProxy).
This change does have some effect on breakpoint locations, due to some
of the available information changing between the parser and bytecode
generator, however the new locations appear to be more consistent
between assignments and declarations.
Change-Id: I3a58dd0a387d2bfb8e5e9e22dde0acc5f440cb82
Reviewed-on: https://chromium-review.googlesource.com/c/1382462
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Cr-Commit-Position: refs/heads/master@{#58670}
This is a reland of part of
https://chromium-review.googlesource.com/c/v8/v8/+/1397664.
It drops the explicit fni_.Infer() call after parsing arrow functions. We'll
want to avoid inferring if the arrow function is an argument to a function
call.
It also avoids adding the single argument of "name => " to the inferred name.
Bug: chromium:916975
Change-Id: I96a934408113483d73eba14073fe21e8cfe2ada6
Reviewed-on: https://chromium-review.googlesource.com/c/1397665
Commit-Queue: Toon Verwaest <verwaest@chromium.org>
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Cr-Commit-Position: refs/heads/master@{#58613}
This reverts commit 3411e7c3e8.
Reason for revert: Breaks test expecations - https://ci.chromium.org/p/chromium/builders/luci.chromium.try/linux_chromium_rel_ng/260731
Original change's description:
> [parser] Create arrow function scopes while parsing the head
>
> This simplifies NextArrowFunctionInfo, allows us to Scope::Snapshot::Reparent
> directly rather than moving it, and allows us to skip reparenting in the simple
> parameter arrow function cases.
>
> This CL additionally fixes arrow function name inferring.
>
> Change-Id: Ie3e5ea778f3d7b84b2a10d4f4ff73931cfc9384a
> Reviewed-on: https://chromium-review.googlesource.com/c/1386147
> Reviewed-by: Igor Sheludko <ishell@chromium.org>
> Commit-Queue: Toon Verwaest <verwaest@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#58405}
TBR=ishell@chromium.org,verwaest@chromium.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Change-Id: I8f31b96f844f0673364bf435fa6c809e40d62fa3
Reviewed-on: https://chromium-review.googlesource.com/c/1388541
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Commit-Queue: Maya Lekova <mslekova@chromium.org>
Cr-Commit-Position: refs/heads/master@{#58446}
This changes a few bits about how continuation counters are handled.
It introduces a new mechanism that allows removal of a continuation
range after it has been created. If coverage is enabled, we run a first
post-processing pass on the AST immediately after parsing, which
removes problematic continuation ranges in two situations:
1. nested continuation counters - only the outermost stays alive.
2. trailing continuation counters within a block-like structure are
removed if the containing structure itself has a continuation.
R=bmeurer@chromium.org, jgruber@chromium.org, yangguo@chromium.org
Bug: v8:8381, v8:8539
Change-Id: I6bcaea5060d8c481d7bae099f6db9f993cc30ee3
Reviewed-on: https://chromium-review.googlesource.com/c/1339119
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#58443}
This simplifies NextArrowFunctionInfo, allows us to Scope::Snapshot::Reparent
directly rather than moving it, and allows us to skip reparenting in the simple
parameter arrow function cases.
This CL additionally fixes arrow function name inferring.
Change-Id: Ie3e5ea778f3d7b84b2a10d4f4ff73931cfc9384a
Reviewed-on: https://chromium-review.googlesource.com/c/1386147
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Commit-Queue: Toon Verwaest <verwaest@chromium.org>
Cr-Commit-Position: refs/heads/master@{#58405}
Don't allocate feedback vectors and feedback metadata in lite mode.
Also updates to skip tests that require feedback vectors.
This is a reland of
https://chromium-review.googlesource.com/c/v8/v8/+/1384087 after skipping
the failing tests.
Bug: v8:8394
Change-Id: I7766533b85a144e62996ceed8d542cdc534feeb5
Reviewed-on: https://chromium-review.googlesource.com/c/1384307
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Commit-Queue: Mythri Alle <mythria@chromium.org>
Cr-Commit-Position: refs/heads/master@{#58363}
This reverts commit 62e86b88e5.
Reason for revert: Fails on arm sim lite debug: https://ci.chromium.org/p/v8/builders/luci.v8.ci/V8%20Linux%20-%20arm%20-%20sim%20-%20lite%20-%20debug/1075
Original change's description:
> Do not allocate feedback vectors and feedback metadata in lite mode
>
> Don't allocate feedback vectors and feedback metadata in lite mode.
> Also updates to skip tests that require feedback vectors.
>
> Bug: v8:8394
> Change-Id: I22c64a32c44bb8f25fb09003d6e9fc5a04e84f8a
> Reviewed-on: https://chromium-review.googlesource.com/c/1378173
> Commit-Queue: Mythri Alle <mythria@chromium.org>
> Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#58351}
TBR=rmcilroy@chromium.org,yangguo@chromium.org,mlippautz@chromium.org,mythria@chromium.org
Change-Id: I88fd37ea4e21aa2cc81eceb87ddb35c23224beae
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:8394
Reviewed-on: https://chromium-review.googlesource.com/c/1384087
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#58355}
Don't allocate feedback vectors and feedback metadata in lite mode.
Also updates to skip tests that require feedback vectors.
Bug: v8:8394
Change-Id: I22c64a32c44bb8f25fb09003d6e9fc5a04e84f8a
Reviewed-on: https://chromium-review.googlesource.com/c/1378173
Commit-Queue: Mythri Alle <mythria@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#58351}
This is a reland of 9c0a48580b
Original change's description:
> Reland "Reland "[code-comments] Put code comments into the code object""
>
> This is a reland of ed3d647284
>
> This reland fixes that padding at the end of Wasm instruction streams
> triggered asserts in the code printer.
>
> Original change's description:
> > Reland "[code-comments] Put code comments into the code object"
> >
> > This is a reland of e774cffe2b
> >
> > This reland disables a test as v8:8548 is blocking it, which was
> > broken by a recent CL. CQ did not catch this because the merge-base
> > CQ used did not yet contain the CL that caused v8:8548.
> >
> > Original change's description:
> > > [code-comments] Put code comments into the code object
> > >
> > > Code comments in the snapshot can now be enabled with gn
> > > arg 'v8_enable_snapshot_code_comments'
> > >
> > > Bug: v8:7989
> > > Change-Id: I8bd00cafa63132d00d849394c311ba15e6b6daf3
> > > Reviewed-on: https://chromium-review.googlesource.com/c/1329173
> > > Commit-Queue: Sigurd Schneider <sigurds@chromium.org>
> > > Reviewed-by: Jakob Gruber <jgruber@chromium.org>
> > > Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
> > > Reviewed-by: Michael Stanton <mvstanton@chromium.org>
> > > Cr-Commit-Position: refs/heads/master@{#58020}
> >
> > TBR=mvstanton@chromium.org,mstarzinger@chromium.org,jgruber@chromium.org,tebbi@chromium.org
> >
> > Bug: v8:7989, v8:8548
> > Change-Id: I464fc897205fefdf2dfc2eadc54d699c4e08a0e9
> > Reviewed-on: https://chromium-review.googlesource.com/c/1361166
> > Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
> > Commit-Queue: Sigurd Schneider <sigurds@chromium.org>
> > Cr-Commit-Position: refs/heads/master@{#58028}
>
> Bug: v8:7989, v8:8548
> Change-Id: I254f55ff687ad049f8d92b09331ed26a2bd05d7d
> Reviewed-on: https://chromium-review.googlesource.com/c/1371784
> Commit-Queue: Sigurd Schneider <sigurds@chromium.org>
> Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
> Reviewed-by: Jakob Gruber <jgruber@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#58221}
TBR=jgruber@chromium.org,mstarzinger@chromium.org
Bug: v8:7989, v8:8548, v8:8593
Change-Id: I4f7ffc98e0281c7b744eb4a04ba0763896c7b59b
Reviewed-on: https://chromium-review.googlesource.com/c/1375919
Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
Commit-Queue: Sigurd Schneider <sigurds@chromium.org>
Cr-Commit-Position: refs/heads/master@{#58232}
Also disables --stress-flush-bytecode on some mjsunit tests which fail
when bytecode flushing is stressed due to test invariants.
Bug=v8:8395
Change-Id: If627910214b3c266e7776340ba182829148e8289
Reviewed-on: https://chromium-review.googlesource.com/c/1372071
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#58230}
Termination exceptions tear down V8 to the bottom-most V8 call. If there is a
v8::TryCatch scope around that call, it returns true for HasTerminated() and
HasCaught(). However, Isolate::IsExecutionTerminating() returns false and we
can call into V8 from still inside the v8::TryCatch scope.
Changes that this patch introduces:
- You need to leave the v8::TryCatch scope around the bottom-most call to
reset the termination state, in order to resume.
- Explicitly check for termination exception and reporting it through the
DevTools protocol after Runtime.evaluate and Debugger.evaluateOnCallFrame.
Bug: v8:8455
Change-Id: I1f36f7a365985469813c2619bf16f18ee69aa4b8
Reviewed-on: https://chromium-review.googlesource.com/c/1337582
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Commit-Queue: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#57963}
These two tests fail if the memory used by builtins increases too much.
They aren't intended to monitor the memory used by builtins, so these
failures are spurious.
Bug: v8:8521
Change-Id: I67e61abe30aaf69aeb3e6a2c885795061a318851
Reviewed-on: https://chromium-review.googlesource.com/c/1354041
Commit-Queue: Peter Marshall <petermarshall@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#57911}
It's been failing for a while, and looks like we reach some arbitrary
heap limit, triggering an early OOM before the debugger hook is set.
Bug: v8:8494
Change-Id: I472dc8955ba2f0eb018ac6e7ca83e4beaaefc318
Reviewed-on: https://chromium-review.googlesource.com/c/1350830
Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#57820}
Types such as "function" have a ValueMirror that does not override
"buildObjectPreview()". This CL updates clients to check that the
preview was actually built after call it.
Bug: chromium:907400
Change-Id: Id569c98363d47b259a40790b596efedb3d14abc2
Reviewed-on: https://chromium-review.googlesource.com/c/1347067
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Commit-Queue: Erik Luo <luoe@chromium.org>
Cr-Commit-Position: refs/heads/master@{#57703}
This is a reland of bf2f0a0227
Original change's description:
> [builtins] Support embedded builtins in nosnapshot builds
>
> This CL adds support for embedded builtins in nosnap builds by creating
> and setting an 'embedded blob' after builtin generation. Unlike
> snapshot builds, the blob is not embedded into the .text section but
> located on the C++ heap.
>
> This makes nosnap builds more consistent with mksnapshot, and allows us
> to simplify there and in serializer cctests.
>
> Complications arise from the different workflows we need to support:
>
> 1. the standard mksnapshot build process,
> 2. nosnap builds (which reuse the blob created by the first Isolate),
> 2. and tests with various complicated serialization workflows.
>
> To cover all of these cases, this CL introduces two knobs to twiddle:
>
> 1. A 'sticky' embedded blob which overrides compiled-in default
> embedded blobs at Isolate setup.
> 2. The blob lifecycle can be managed manually or through refcounting.
>
> These are described in more detail in isolate.cc.
>
> Tbr: ulan@chromium.org
> Bug: v8:6666, v8:8350
> Change-Id: I3842e40cdaf45d2cadd05c6eb1ec2f5e3d83568d
> Reviewed-on: https://chromium-review.googlesource.com/c/1310195
> Reviewed-by: Jakob Gruber <jgruber@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Commit-Queue: Jakob Gruber <jgruber@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#57523}
Tbr: ulan@chromium.org,yangguo@chromium.org
Bug: v8:6666, v8:8350
Change-Id: I13b523c9e7406b39a3cd28465c06f17f1744a738
Reviewed-on: https://chromium-review.googlesource.com/c/1337578
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#57540}
This reverts commit bf2f0a0227.
Reason for revert: https://ci.chromium.org/p/v8/builders/luci.v8.ci/V8%20Linux%20-%20nosnap%20-%20debug/21753
Original change's description:
> [builtins] Support embedded builtins in nosnapshot builds
>
> This CL adds support for embedded builtins in nosnap builds by creating
> and setting an 'embedded blob' after builtin generation. Unlike
> snapshot builds, the blob is not embedded into the .text section but
> located on the C++ heap.
>
> This makes nosnap builds more consistent with mksnapshot, and allows us
> to simplify there and in serializer cctests.
>
> Complications arise from the different workflows we need to support:
>
> 1. the standard mksnapshot build process,
> 2. nosnap builds (which reuse the blob created by the first Isolate),
> 2. and tests with various complicated serialization workflows.
>
> To cover all of these cases, this CL introduces two knobs to twiddle:
>
> 1. A 'sticky' embedded blob which overrides compiled-in default
> embedded blobs at Isolate setup.
> 2. The blob lifecycle can be managed manually or through refcounting.
>
> These are described in more detail in isolate.cc.
>
> Tbr: ulan@chromium.org
> Bug: v8:6666, v8:8350
> Change-Id: I3842e40cdaf45d2cadd05c6eb1ec2f5e3d83568d
> Reviewed-on: https://chromium-review.googlesource.com/c/1310195
> Reviewed-by: Jakob Gruber <jgruber@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Commit-Queue: Jakob Gruber <jgruber@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#57523}
TBR=ulan@chromium.org,yangguo@chromium.org,jgruber@chromium.org
Change-Id: I6e35a0cb7186fb50f1012f5c618fb8b48b24a813
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:6666, v8:8350
Reviewed-on: https://chromium-review.googlesource.com/c/1337577
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#57529}
This CL adds support for embedded builtins in nosnap builds by creating
and setting an 'embedded blob' after builtin generation. Unlike
snapshot builds, the blob is not embedded into the .text section but
located on the C++ heap.
This makes nosnap builds more consistent with mksnapshot, and allows us
to simplify there and in serializer cctests.
Complications arise from the different workflows we need to support:
1. the standard mksnapshot build process,
2. nosnap builds (which reuse the blob created by the first Isolate),
2. and tests with various complicated serialization workflows.
To cover all of these cases, this CL introduces two knobs to twiddle:
1. A 'sticky' embedded blob which overrides compiled-in default
embedded blobs at Isolate setup.
2. The blob lifecycle can be managed manually or through refcounting.
These are described in more detail in isolate.cc.
Tbr: ulan@chromium.org
Bug: v8:6666, v8:8350
Change-Id: I3842e40cdaf45d2cadd05c6eb1ec2f5e3d83568d
Reviewed-on: https://chromium-review.googlesource.com/c/1310195
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#57523}
`console.table` used to have a 1k limit on preview properties, which
regressed to 100 during refactoring.
This CL restores the 1k limit, and ensures that `buildEntryPreview`
does not use the 1k limit.
Bug: chromium:903623
Change-Id: I8fab3182a79d1bb6b662e2ff9b229db3d3a889ca
Reviewed-on: https://chromium-review.googlesource.com/c/1332127
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Commit-Queue: Erik Luo <luoe@chromium.org>
Cr-Commit-Position: refs/heads/master@{#57518}
This test takes nearly 10 minutes to run on arm64, and over 5 on arm.
Bug: v8:7783
Change-Id: I6798c001a76c59974729e4b2618167578eb50a1b
Reviewed-on: https://chromium-review.googlesource.com/c/1321034
Commit-Queue: Adam Klein <adamk@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Cr-Commit-Position: refs/heads/master@{#57327}
This CL only clears the wasm translations that correspond to the context
group being reset instead of clearing all.
R=clemensh@chromium.org,kozyatinskiy@chromium.org
BUG=chromium:892864
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Ib5af0489cbdb7c9b1571cb9cf935fda3bee14015
Reviewed-on: https://chromium-review.googlesource.com/c/1292676
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Reviewed-by: Alexei Filippov <alph@chromium.org>
Commit-Queue: Aseem Garg <aseemgarg@chromium.org>
Cr-Commit-Position: refs/heads/master@{#57302}
Rename variables and flag names so that the classes can be reused
by private methods implementation.
In particular:
Rename "fields" to "members" in the initializer so that we can
initialize both fields and private methods/accessors there,
for example:
instance_fields_initializer -> instance_members_initializer
InitializeClassFieldsStatement -> InitializeClassMembersStatement
Rename "private field" to "private name" for the private symbols
used to implement private fields so that we can use them to
store private methods/accessors later as well, for example:
private_field_name_var -> private_name_var
NewPrivateFieldSymbol -> NewPrivateNameSymbol
The follow-on is in
https://chromium-review.googlesource.com/c/v8/v8/+/1301018
The design doc is in
https://docs.google.com/document/d/1T-Ql6HOIH2U_8YjWkwK2rTfywwb7b3Qe8d3jkz72KwA/edit?usp=sharing
Bug: v8:8330
Change-Id: I1cdca8def711da879b6e4d67c5ff0a5a4a36abbe
Reviewed-on: https://chromium-review.googlesource.com/c/1312597
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Reviewed-by: Sathya Gunasekaran <gsathya@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Joyee Cheung <joyee@igalia.com>
Cr-Commit-Position: refs/heads/master@{#57289}
This is resurrecting an optimization from the pre-torque version.
Avoid allocating another sequential string for the result when there's only one
element, just return the ToString-ed element. This not only saves time writing
to this destination string, but also reduce GC pressure.
The System Health Memory Benchmark (load:media:google_images) exposed this missing
optimization with a 15% regression in memory usage. Very large external strings
were being copied into V8's heap as sequential string.
Bug: chromium:896612
Change-Id: Ieb61906f64100cdc15bf96f3ebcccb1207f75356
Reviewed-on: https://chromium-review.googlesource.com/c/1316620
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Peter Wong <peter.wm.wong@gmail.com>
Cr-Commit-Position: refs/heads/master@{#57241}
This is a reland of 7350e7b220
Disabled LayoutTest that was causing issues and will rebaseline once this has rolled.
Original change's description:
> Get BytecodeArray via current frame where possible.
>
> With BytecodeArray flushing the SFI->BytecodeArray pointer will become pseudo weak.
> Instead of getting the bytecode array from the SFI, get it from the frame instead
> (which is a strong pointer). Note: This won't actually change behaviour since the
> fact that the bytecode array was on the frame will retain it strongly, however it
> makes the contract that the BytecodeArray must exist at these points more explicit.
>
> Updates code in runtime-profiler.cc, frames.cc and runtime-test.cc to do this.
>
> BUG=v8:8395
>
> Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
> Change-Id: Id7a3e6857abd0e89bf238e9b0b01de4461df54e1
> Reviewed-on: https://chromium-review.googlesource.com/c/1310193
> Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
> Reviewed-by: Mythri Alle <mythria@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#57198}
TBR=mythria@chromium.org
Bug: v8:8395
Change-Id: I63044138f876a1cdfb8bb71499732a257f30d29a
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Reviewed-on: https://chromium-review.googlesource.com/c/1314336
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#57219}
This reverts commit 7350e7b220.
Reason for revert: Braking layout test, blocking the roll, see
https://bugs.chromium.org/p/v8/issues/detail?id=8405
Original change's description:
> Get BytecodeArray via current frame where possible.
>
> With BytecodeArray flushing the SFI->BytecodeArray pointer will become pseudo weak.
> Instead of getting the bytecode array from the SFI, get it from the frame instead
> (which is a strong pointer). Note: This won't actually change behaviour since the
> fact that the bytecode array was on the frame will retain it strongly, however it
> makes the contract that the BytecodeArray must exist at these points more explicit.
>
> Updates code in runtime-profiler.cc, frames.cc and runtime-test.cc to do this.
>
> BUG=v8:8395
>
> Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
> Change-Id: Id7a3e6857abd0e89bf238e9b0b01de4461df54e1
> Reviewed-on: https://chromium-review.googlesource.com/c/1310193
> Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
> Reviewed-by: Mythri Alle <mythria@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#57198}
TBR=rmcilroy@chromium.org,mythria@chromium.org
Change-Id: Ie5db0ec1d68ca01d62e9880a4476704ad4d013b5
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:8395
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Reviewed-on: https://chromium-review.googlesource.com/c/1314330
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Commit-Queue: Maya Lekova <mslekova@chromium.org>
Cr-Commit-Position: refs/heads/master@{#57205}
With BytecodeArray flushing the SFI->BytecodeArray pointer will become pseudo weak.
Instead of getting the bytecode array from the SFI, get it from the frame instead
(which is a strong pointer). Note: This won't actually change behaviour since the
fact that the bytecode array was on the frame will retain it strongly, however it
makes the contract that the BytecodeArray must exist at these points more explicit.
Updates code in runtime-profiler.cc, frames.cc and runtime-test.cc to do this.
BUG=v8:8395
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Id7a3e6857abd0e89bf238e9b0b01de4461df54e1
Reviewed-on: https://chromium-review.googlesource.com/c/1310193
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Mythri Alle <mythria@chromium.org>
Cr-Commit-Position: refs/heads/master@{#57198}
- introduced ValueMirror interface, this interface contains methods to generate
different protocol entities,
- introduced DebugPropertyIterator, this iterator iterates through object properties
in the following order: exotic indices, enumerable strings, all other properties,
- removed all injected script infra, e.g. closure compiler,
R=dgozman@chromium.orgTBR=yangguo@chromium.org
Bug: chromium:595206
Change-Id: I030fdb3a80074ca6edd4749f86b39b590776ae6f
Reviewed-on: https://chromium-review.googlesource.com/c/1310056
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#57181}
- introduced ValueMirror interface, this interface contains methods to generate
different protocol entities,
- introduced DebugPropertyIterator, this iterator iterates through object properties
in the following order: exotic indices, enumerable strings, all other properties,
- removed all injected script infra, e.g. closure compiler,
R=dgozman@chromium.orgTBR=yangguo@chromium.org
Bug: chromium:595206
Change-Id: Idcfc04489ee52e015ad1d1d191c3474cc65e63f2
Reviewed-on: https://chromium-review.googlesource.com/c/1308353
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#57150}
Full custom preview generation is moved to custom-preview file
including frontend part. New custom preview implementation returns
body getter function instead of bind function, formatter and config
objects. Body getter function calls formatter.body(object, config)
and returns json ML.
R=dgozman@chromium.org
Bug: chromium:595206
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I14ff3d8abb4a47d2bbc2e6eaa1835fc362ac7369
Reviewed-on: https://chromium-review.googlesource.com/c/1292686
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56872}
Async tail might be long. On frontend side we use only top frame so
we can report tail using id.
R=dgozman@chromium.org
Bug: chromium:873865
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Ie9e6b5c4c000cc6bedce2d5fec9f3fa22ea21768
Reviewed-on: https://chromium-review.googlesource.com/c/1286959
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56784}
This skips the slowest tests in stress and noopt variants.
TBR=sigurds@chromium.org
NOTRY=true
Bug: v8:7783
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Ic471a2ab3e6806c4c60b81c0cdddfb44b199dd26
Reviewed-on: https://chromium-review.googlesource.com/c/1286334
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56715}
When trying to print the scope information for the class fields
initializer function, the debugger asks the parser to parse the class
literal as a function literal (to get the scope info) ... which
doesn't quite work.
Instead of adding support for parsing the class literal, we just short
cicruit this parsing step by just returning an empty context.
This works fine because initializer function doesn't have any
variables in it's local scope.
The one caveat is that the objects in the scope above this function
(like the global) are now missing. This trade off is possibly fine
for now, as adding parsing support for class literal to only produce
would be a lot of code for not enough use.
As a follow up to this change, the devtools UI needs to be updated to
handle this empty context cleanly. Currently, it doesn't show the
`this` object if no context exists even if the `this` object is
correctly passed to the UI from the backend.
Bug: v8:5367, v8:8122
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I52965f26241bbf6abdc988783aa0fc44bb36901f
Reviewed-on: https://chromium-review.googlesource.com/c/1274268
Commit-Queue: Sathya Gunasekaran <gsathya@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56611}
Before adding another test for removing breakpoint, this CL modernizes
the existing test for setting breakpoints.
R=kozy@chromium.orgCC=ahaas@chromium.org
Bug: chromium:837572
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I642f9673f327f4ec569a4f67a61b5e264cf25b8f
Reviewed-on: https://chromium-review.googlesource.com/c/1264636
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56514}
This change introduces new intrinsics used to desugar async functions
in the Parser and the BytecodeGenerator, namely we introduce a new
%_AsyncFunctionEnter intrinsic that constructs the generator object
for the async function (and in the future will also create the outer
promise for the async function). This generator object is internal
and never escapes to user code, plus since async functions don't have
a "prototype" property, we can just a single map here instead of tracking
the prototype/initial_map on every async function. This saves one word
per async function plus one initial_map per async function that was
invoked at least once.
We also introduce two new intrinsics %_AsyncFunctionReject, which
rejects the outer promise with the caught exception, and another
%_AsyncFunctionResolve, which resolves the outer promise with the
right hand side of the `return` statement. These functions also perform
the DevTools part of the job (aka popping from the promise stack and
sending the debug event). This allows us to get rid of the implicit
try-finally from async functions completely; because the finally
block only called to the %AsyncFunctionPromiseRelease builtin, which
was used to inform DevTools.
In essence we now turn an async function like
```js
async function f(x) { return await bar(x); }
```
into something like this (in Parser and BytecodeGenerator respectively):
```
function f(x) {
.generator_object = %_AsyncFunctionEnter(.closure, this);
.promise = %AsyncFunctionCreatePromise();
try {
.tmp = await bar(x);
return %_AsyncFunctionResolve(.promise, .tmp);
} catch (e) {
return %_AsyncFunctionReject(.promise, e);
}
}
```
Overall the bytecode for async functions gets significantly shorter
already (and will get even shorter once we put the outer promise into
the async function generator object). For example the bytecode for a
simple async function
```js
async function f(x) { return await x; }
```
goes from 175 bytes to 110 bytes (a ~38% reduction in size), which
is in particular due to the simplification around the try-finally
removal.
Overall this seems to improve the doxbee-async-es2017-native test by
around 2-3%. On the test case mentioned in v8:8276 we go from
1124ms to 441ms, which corresponds to a 60% reduction in total
execution time!
Tbr: marja@chromium.org
Bug: v8:7253, v8:7522, v8:8276
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;luci.chromium.try:linux_chromium_rel_ng;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Id29dc92de7490b387ff697860c900cee44c9a7a4
Reviewed-on: https://chromium-review.googlesource.com/c/1269041
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Sathya Gunasekaran <gsathya@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56502}
Current implementation might take significant amount of time to
traverse big message. We can reuse builtin JSON.stringify replacer
feature to achieve big performance boost.
R=dgozman@chromium.org
Bug: none
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I59c15f3abb951e2aac938436657b18f608df5099
Reviewed-on: https://chromium-review.googlesource.com/c/1270263
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56484}
For wasm modules with non-absolute sourceMappingURL, the source needs
to be empty so that devtools can look for the source map at the origin
of the module.
R=clemensh@chromium.org,adamk@chromium.org
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I74c40addc1a7cb1be0442e9f2b272590c0b81f60
Reviewed-on: https://chromium-review.googlesource.com/1250402
Commit-Queue: Aseem Garg <aseemgarg@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56326}
It was shipped in Chrome 67.
Bug: v8:6791, v8:8238
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;luci.chromium.try:linux_chromium_rel_ng;luci.v8.try:v8_linux_noi18n_rel_ng;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I94d8f0aa18570452403a35dea270b18f155c970a
Reviewed-on: https://chromium-review.googlesource.com/1253604
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Mathias Bynens <mathias@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56310}
Sometimes we do not have promise on stack, e.g. Promise.reject call,
but we need to attribute this pause with promise rejection.
TBR=yangguo@chromium.org
Bug: chromium:755728
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I03ca1e1cd6c21677f0a12ece626e2c8a1938437b
Reviewed-on: https://chromium-review.googlesource.com/1249942
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56293}
.. otherwise V8 crashes on attempt to use imported function as part
of expression passed to Debugger.evaluateOnCallFrame.
R=neis@chromium.org
Bug: chromium:878029
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I61b837f5c7b84a80d91a9cdaaac0422a24aa1620
Reviewed-on: https://chromium-review.googlesource.com/1241475
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56216}
After total liveedit rewrite, liveedit works with module, we can remove
the guard.
R=dgozman@chromium.org
Bug: chromium:806261
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Ide15eca2ab6d8ba7df4e7fae541c4a65794eeea8
Reviewed-on: https://chromium-review.googlesource.com/1238914
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56151}
This CL enables source maps support for wasm. Devtools should
be able to pick up source_mapping_url parsed here and load the
corresponding source maps.
R=kozyatinskiy@chromium.org,clemensh@chromium.org,titzer@chromium.org,yangguo@chromium.org
BUG=v8:8081
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;luci.chromium.try:linux_chromium_rel_ng;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I1db0ff597d229e7db8d383fe9ee081c7fa4e7648
Reviewed-on: https://chromium-review.googlesource.com/1185973
Commit-Queue: Aseem Garg <aseemgarg@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#55878}
This enables cctest, unittests, fuzzer and inspector on Android.
The cctest suite requires extra resource-fetching logic for the
bytecode-generator expectation files.
Bug: chromium:866862
Cq-Include-Trybots: luci.v8.try:v8_android_arm64_n5x_rel_ng
Change-Id: If3da853a62c047388476a7f38e32e64e2859f186
Reviewed-on: https://chromium-review.googlesource.com/1213208
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Sergiy Byelozyorov <sergiyb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#55784}
This reverts commit 1b3b808a54.
Reason for revert: crbug/879988
TBR=kozy@chromium.org
Original change's description:
> inspector: find magic comment using V8 scanner
>
> Inspector tries to provide sourceURL and sourceMappingURL for scripts
> with parser errors. Without this CL we convert source of each script
> to inspector string and search for magic comment there. Some web sites
> use pattern when they get some data from network and constantly try to
> parse this data as JSON, in this case we do a lot of useless work.
>
> So we can parse magic comments on V8 side only for compilation errors
> (excluding parse JSON errors), to do it we can reuse scanner by running
> it on each potential comment.
>
> R=alph@chromium.org,verwaest@chromium.org,yangguo@chromium.org
>
> Bug: chromium:873865,v8:7731
> Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
> Change-Id: I77c270fd0e95cd7b2c9ee4b7f72ef344bc1fa104
> Reviewed-on: https://chromium-review.googlesource.com/1182446
> Reviewed-by: Toon Verwaest <verwaest@chromium.org>
> Reviewed-by: Alexei Filippov <alph@chromium.org>
> Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#55280}
TBR=alph@chromium.org,yangguo@chromium.org,kozyatinskiy@chromium.org,verwaest@chromium.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: chromium:873865, v8:7731, chromium:879988
Change-Id: Ia7ac766e19f9b58562d9430811f10b25c4556a46
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Reviewed-on: https://chromium-review.googlesource.com/1202583
Commit-Queue: Yang Guo <yangguo@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#55594}
DebugEvaluate contains code since 2009 that bypasses JSGlobalProxy and
returns JSGlobalObject when result of expression is global proxy.
This behavior may be dangerous:
- JSGlobalObject does not perform security checks,
- some parts of V8 code do not ready for JSGlobalObject, e.g.,
SetHashAndUpdateProperties function will crash on DCHECK if we will
try to store JSGlobalObject to map.
At the same time it looks like there is no any valid use case for it.
R=yangguo@chromium.org
Bug: none
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Ib0e35d5ae9ef47318c866e44c5c6856e34ed05a5
Reviewed-on: https://chromium-review.googlesource.com/1198764
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#55550}
This is a reland of 1b3b808a54
Original change's description:
> inspector: find magic comment using V8 scanner
>
> Inspector tries to provide sourceURL and sourceMappingURL for scripts
> with parser errors. Without this CL we convert source of each script
> to inspector string and search for magic comment there. Some web sites
> use pattern when they get some data from network and constantly try to
> parse this data as JSON, in this case we do a lot of useless work.
>
> So we can parse magic comments on V8 side only for compilation errors
> (excluding parse JSON errors), to do it we can reuse scanner by running
> it on each potential comment.
>
> R=alph@chromium.org,verwaest@chromium.org,yangguo@chromium.org
>
> Bug: chromium:873865,v8:7731
> Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
> Change-Id: I77c270fd0e95cd7b2c9ee4b7f72ef344bc1fa104
> Reviewed-on: https://chromium-review.googlesource.com/1182446
> Reviewed-by: Toon Verwaest <verwaest@chromium.org>
> Reviewed-by: Alexei Filippov <alph@chromium.org>
> Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#55280}
TBR=alph@chromium.org,verwaest@chromium.org,yangguo@chromium.org
Bug: chromium:873865, v8:7731
Change-Id: I097678fda0ebdcbd35a85be0bb6cf0fcb052bcbd
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Reviewed-on: https://chromium-review.googlesource.com/1195533
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#55507}
This reverts commit 1b3b808a54.
Reason for revert: Speculatively reverting because of https://ci.chromium.org/p/v8/builders/luci.v8.ci/V8-Blink%20Linux%2064%20(dbg)/13264
Original change's description:
> inspector: find magic comment using V8 scanner
>
> Inspector tries to provide sourceURL and sourceMappingURL for scripts
> with parser errors. Without this CL we convert source of each script
> to inspector string and search for magic comment there. Some web sites
> use pattern when they get some data from network and constantly try to
> parse this data as JSON, in this case we do a lot of useless work.
>
> So we can parse magic comments on V8 side only for compilation errors
> (excluding parse JSON errors), to do it we can reuse scanner by running
> it on each potential comment.
>
> R=alph@chromium.org,verwaest@chromium.org,yangguo@chromium.org
>
> Bug: chromium:873865,v8:7731
> Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
> Change-Id: I77c270fd0e95cd7b2c9ee4b7f72ef344bc1fa104
> Reviewed-on: https://chromium-review.googlesource.com/1182446
> Reviewed-by: Toon Verwaest <verwaest@chromium.org>
> Reviewed-by: Alexei Filippov <alph@chromium.org>
> Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#55280}
TBR=alph@chromium.org,yangguo@chromium.org,kozyatinskiy@chromium.org,verwaest@chromium.org
Change-Id: I60ab243107d5fcce100064232d0e278a51f38db9
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:873865, v8:7731
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Reviewed-on: https://chromium-review.googlesource.com/1184921
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Commit-Queue: Maya Lekova <mslekova@chromium.org>
Cr-Commit-Position: refs/heads/master@{#55300}
Inspector tries to provide sourceURL and sourceMappingURL for scripts
with parser errors. Without this CL we convert source of each script
to inspector string and search for magic comment there. Some web sites
use pattern when they get some data from network and constantly try to
parse this data as JSON, in this case we do a lot of useless work.
So we can parse magic comments on V8 side only for compilation errors
(excluding parse JSON errors), to do it we can reuse scanner by running
it on each potential comment.
R=alph@chromium.org,verwaest@chromium.org,yangguo@chromium.org
Bug: chromium:873865,v8:7731
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I77c270fd0e95cd7b2c9ee4b7f72ef344bc1fa104
Reviewed-on: https://chromium-review.googlesource.com/1182446
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Reviewed-by: Alexei Filippov <alph@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#55280}
Some clients (see Node.js) use platform path as ScriptOrigin.
Reporting platform path in protocol makes using protocol much harder.
This CL introduced V8InspectorClient::resourceNameToUrl method that
is called for any reported using protocol url.
V8Inspector uses url internally as well so protocol client may generate
pattern for blackboxing with file urls only and does not need to build
complicated regexp that covers files urls and platform paths on
different platforms.
R=lushnikov@chromium.orgTBR=yangguo@chromium.org
Bug: none
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;luci.chromium.try:linux_chromium_rel_ng;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Iff302e7441df922fa5d689fe510f5a9bfd470b9b
Reviewed-on: https://chromium-review.googlesource.com/1164624
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Alexei Filippov <alph@chromium.org>
Cr-Commit-Position: refs/heads/master@{#55029}
ReadFile returned a Vector with ownership transfer, i.e. the client
needed to call Dispose to free the memory. This CL changes the interface
to return a std::string instead, which manages ownership. As it turns
out, there is only one user of ReadString that sometimes calls an API
function which expects to take ownership of its Vector argument.
Bug: v8:7932
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;luci.chromium.try:linux_chromium_rel_ng;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Ie624a7a65cf5814fddce7a57bc557e4b9876bc53
Reviewed-on: https://chromium-review.googlesource.com/1155115
Commit-Queue: Sigurd Schneider <sigurds@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/master@{#54805}
Use the isolate version instead.
BUG=v8:7754
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;luci.chromium.try:linux_chromium_rel_ng;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I5239192fe6d31e84028806127d21ac54ee0a8ef6
Reviewed-on: https://chromium-review.googlesource.com/1146181
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#54702}
This is a reland of 3dfaf8264f
Original change's description:
> [debug] liveedit in native
>
> Liveedit step-by-step:
> 1. calculate diff between old source and new source,
> 2. map function literals from old source to new source,
> 3. create new script for new_source,
> 4. mark literals with changed code as changed, all others as unchanged,
> 5. check that for changed literals there are no:
> - running generators in the heap,
> - non droppable frames (e.g. running generator) above them on stack.
> 6. mark the bottom most frame with changed function as scheduled for
> restart if any.
> 7. for unchanged functions:
> - deoptimize,
> - remove from cache,
> - update source positions,
> - move to new script,
> - reset feedback information and preparsed scope information if any,
> - replace any sfi in constant pool with changed one if any.
> 8. for changed functions:
> - deoptimize
> - remove from cache,
> - reset feedback information,
> - update all links from js functions to old shared with new one.
> 9. swap scripts.
>
> TBR=ulan@chromium.org
>
> Bug: v8:7862,v8:5713
> Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;luci.chromium.try:linux_chromium_rel_ng;master.tryserver.blink:linux_trusty_blink_rel
> Change-Id: I8f6f6156318cc82d6f36d7ebc1c9f7d5f3aa1461
> Reviewed-on: https://chromium-review.googlesource.com/1105493
> Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
> Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#54146}
TBR=dgozman@chromium.org
Bug: v8:7862, v8:5713
Change-Id: I163ed2fd2ca3115ba0de74cb35a6fac9e40fdd94
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;luci.chromium.try:linux_chromium_rel_ng;master.tryserver.blink:linux_trusty_blink_rel
Reviewed-on: https://chromium-review.googlesource.com/1124879
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#54187}
This reverts commit 3dfaf8264f.
Reason for revert: Failures - https://ci.chromium.org/p/v8/builders/luci.v8.ci/V8%20Linux%20gcc%204.8/20394
Original change's description:
> [debug] liveedit in native
>
> Liveedit step-by-step:
> 1. calculate diff between old source and new source,
> 2. map function literals from old source to new source,
> 3. create new script for new_source,
> 4. mark literals with changed code as changed, all others as unchanged,
> 5. check that for changed literals there are no:
> - running generators in the heap,
> - non droppable frames (e.g. running generator) above them on stack.
> 6. mark the bottom most frame with changed function as scheduled for
> restart if any.
> 7. for unchanged functions:
> - deoptimize,
> - remove from cache,
> - update source positions,
> - move to new script,
> - reset feedback information and preparsed scope information if any,
> - replace any sfi in constant pool with changed one if any.
> 8. for changed functions:
> - deoptimize
> - remove from cache,
> - reset feedback information,
> - update all links from js functions to old shared with new one.
> 9. swap scripts.
>
> TBR=ulan@chromium.org
>
> Bug: v8:7862,v8:5713
> Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;luci.chromium.try:linux_chromium_rel_ng;master.tryserver.blink:linux_trusty_blink_rel
> Change-Id: I8f6f6156318cc82d6f36d7ebc1c9f7d5f3aa1461
> Reviewed-on: https://chromium-review.googlesource.com/1105493
> Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
> Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#54146}
TBR=dgozman@chromium.org,ulan@chromium.org,yangguo@chromium.org,kozyatinskiy@chromium.org
Change-Id: I45df5b6f3abaf29e593c6ac11edefbd0177d0109
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:7862, v8:5713
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;luci.chromium.try:linux_chromium_rel_ng;master.tryserver.blink:linux_trusty_blink_rel
Reviewed-on: https://chromium-review.googlesource.com/1124159
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#54151}
Liveedit step-by-step:
1. calculate diff between old source and new source,
2. map function literals from old source to new source,
3. create new script for new_source,
4. mark literals with changed code as changed, all others as unchanged,
5. check that for changed literals there are no:
- running generators in the heap,
- non droppable frames (e.g. running generator) above them on stack.
6. mark the bottom most frame with changed function as scheduled for
restart if any.
7. for unchanged functions:
- deoptimize,
- remove from cache,
- update source positions,
- move to new script,
- reset feedback information and preparsed scope information if any,
- replace any sfi in constant pool with changed one if any.
8. for changed functions:
- deoptimize
- remove from cache,
- reset feedback information,
- update all links from js functions to old shared with new one.
9. swap scripts.
TBR=ulan@chromium.org
Bug: v8:7862,v8:5713
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;luci.chromium.try:linux_chromium_rel_ng;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I8f6f6156318cc82d6f36d7ebc1c9f7d5f3aa1461
Reviewed-on: https://chromium-review.googlesource.com/1105493
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#54146}
After this CL all liveedit tests call the same LiveEdit::PatchScript
method. This method will be updated later.
As well some new liveedit cctests added, unfortunately part of them
do not work with current implementation.
R=dgozman@chromium.org,yangguo@chromium.org
Bug: v8:7862
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;luci.chromium.try:linux_chromium_rel_ng;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I3521af12b0f95b39d13aaafb1d1cf60f3f642a97
Reviewed-on: https://chromium-review.googlesource.com/1108382
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53936}
This is a step towards avoiding materializing function_ altogether if we deoptimize. Typically we only need the SharedFunctionInfo.
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Idee78f02d1afe3d2cb70e93a6d96a5a33907f892
Reviewed-on: https://chromium-review.googlesource.com/1100474
Commit-Queue: Toon Verwaest <verwaest@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53789}
This reverts commit 9e27d4735f.
Reason for revert: Layout Test failures: https://ci.chromium.org/buildbot/client.v8.fyi/V8-Blink%20Linux%2064/24123
Original change's description:
> [debugger] Rewrite the ScopeIterator/DebugEvaluate to use Scope rather than ScopeInfo for inner scopes.
>
> This CL also bottlenecks all current scope handling in the ScopeIterator, and cleans up frame handling in debug-frames and the deoptimizer.
>
> Change-Id: I061922a356ce17794262f8d77d5d7c824558fc50
> Reviewed-on: https://chromium-review.googlesource.com/1095094
> Commit-Queue: Toon Verwaest <verwaest@chromium.org>
> Reviewed-by: Georg Neis <neis@chromium.org>
> Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#53741}
TBR=yangguo@chromium.org,jarin@chromium.org,neis@chromium.org,jgruber@chromium.org,verwaest@chromium.org
Change-Id: I892856056258e3c68b36409b8b2d69e7686fc385
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://chromium-review.googlesource.com/1102377
Commit-Queue: Yang Guo <yangguo@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53756}
This is a reland of 9e27d4735f
Original change's description:
> [debugger] Rewrite the ScopeIterator/DebugEvaluate to use Scope rather than ScopeInfo for inner scopes.
>
> This CL also bottlenecks all current scope handling in the ScopeIterator, and cleans up frame handling in debug-frames and the deoptimizer.
>
> Change-Id: I061922a356ce17794262f8d77d5d7c824558fc50
> Reviewed-on: https://chromium-review.googlesource.com/1095094
> Commit-Queue: Toon Verwaest <verwaest@chromium.org>
> Reviewed-by: Georg Neis <neis@chromium.org>
> Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#53741}
Change-Id: I05262fef66d852876b9bb2869339053629c9b51d
Reviewed-on: https://chromium-review.googlesource.com/1102297
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Toon Verwaest <verwaest@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53751}
This reverts commit 9e27d4735f.
Reason for revert: Fails MSan (use of uninitialized value): https://ci.chromium.org/buildbot/client.v8/V8%20Linux%20-%20arm64%20-%20sim%20-%20MSAN/21562
Original change's description:
> [debugger] Rewrite the ScopeIterator/DebugEvaluate to use Scope rather than ScopeInfo for inner scopes.
>
> This CL also bottlenecks all current scope handling in the ScopeIterator, and cleans up frame handling in debug-frames and the deoptimizer.
>
> Change-Id: I061922a356ce17794262f8d77d5d7c824558fc50
> Reviewed-on: https://chromium-review.googlesource.com/1095094
> Commit-Queue: Toon Verwaest <verwaest@chromium.org>
> Reviewed-by: Georg Neis <neis@chromium.org>
> Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#53741}
TBR=yangguo@chromium.org,jarin@chromium.org,neis@chromium.org,jgruber@chromium.org,verwaest@chromium.org
Change-Id: Ief87c1e79fa2ec40f52fd747ec4ebbacf0da798b
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://chromium-review.googlesource.com/1101377
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53743}
This CL also bottlenecks all current scope handling in the ScopeIterator, and cleans up frame handling in debug-frames and the deoptimizer.
Change-Id: I061922a356ce17794262f8d77d5d7c824558fc50
Reviewed-on: https://chromium-review.googlesource.com/1095094
Commit-Queue: Toon Verwaest <verwaest@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53741}
Currently we enable instrumentation if debugger is active. With this
approach we can not:
- capture async stack when debugger is disabled,
- avoid async instrumentation overhead when debugger is enabled and
async stacks are disabled.
R=dgozman@chromium.org,yangguo@chromium.org
Bug: none
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;luci.chromium.try:linux_chromium_rel_ng;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I19400c4c4e12b6c9b5a980fb6bd3293bac6e6a64
Reviewed-on: https://chromium-review.googlesource.com/1081494
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53530}
1) Let firstNonEmptySourceURL traverse async stack trace (if any).
2) Expose Runtime.setMaxCallStackSizeToCapture API to control the number of frames to capture.
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I72f021c6ae9e317af67c3114fd4860ce0f06d977
Reviewed-on: https://chromium-review.googlesource.com/1085643
Commit-Queue: Hidy Han <hidyhan@chromium.org>
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Pavel Feldman <pfeldman@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53506}
After [1], a manual dependency on exe_and_shlib_deps is no longer necessary
since it's automatically added. This CL removes all remaining manual references
to exe_and_shlib_deps.
[1] d7ed1f0a9c
BUG=chromium:845700
R=machenbach
Change-Id: I17da573b7b6509a690caf8be6ae6afc180105f07
Reviewed-on: https://chromium-review.googlesource.com/1082913
Commit-Queue: Thomas Anderson <thomasanderson@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53500}
This is a reland of 49c4ac7753
Original change's description:
> [inspector] added Runtime.installBinding method
>
> A lot of different clients use console.debug as a message channel from
> page to protocol client. console.debug is a little slow and not
> designed for this use case.
>
> This CL introduces new method: Runtime.installBinding. This method
> installs binding function by given name on global object on each
> inspected context including any context created later.
> Binding function takes exactly one string argument. Each time when
> binding function is called, Runtime.bindingCalled notification is
> triggered and includes passed payload.
>
> Binding function survives page reload and reinstalled right after
> console object is setup. So installed binding can be used inside
> script added by Page.addScriptToEvaluateOnNewDocument so client may do
> something like:
> Runtime.installBinding({name: 'send'});
> Page.addScriptToEvaluateOnNewDocument({source: 'console.debug = send'});
> .. navigate page ..
>
> In microbenchmark this function is ~4.6 times faster then
> console.debug.
>
> R=lushnikov@chromium.org,pfeldman@chromium.org
>
> Bug: none
> Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
> Change-Id: I3e0e231dde9d45116709d248f6e9e7ec7037e8e3
> Reviewed-on: https://chromium-review.googlesource.com/1077662
> Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
> Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#53462}
TBR=dgozman@chromium.org
Bug: none
Change-Id: I58d053581a86f15338dea621498058b7b75c7c85
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Reviewed-on: https://chromium-review.googlesource.com/1081833
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53479}
This reverts commit 49c4ac7753.
Reason for revert: breaks linux_chromium_rel_ng when rolling into Chromium: https://ci.chromium.org/p/chromium/builders/luci.chromium.try/linux_chromium_rel_ng/107377
Original change's description:
> [inspector] added Runtime.installBinding method
>
> A lot of different clients use console.debug as a message channel from
> page to protocol client. console.debug is a little slow and not
> designed for this use case.
>
> This CL introduces new method: Runtime.installBinding. This method
> installs binding function by given name on global object on each
> inspected context including any context created later.
> Binding function takes exactly one string argument. Each time when
> binding function is called, Runtime.bindingCalled notification is
> triggered and includes passed payload.
>
> Binding function survives page reload and reinstalled right after
> console object is setup. So installed binding can be used inside
> script added by Page.addScriptToEvaluateOnNewDocument so client may do
> something like:
> Runtime.installBinding({name: 'send'});
> Page.addScriptToEvaluateOnNewDocument({source: 'console.debug = send'});
> .. navigate page ..
>
> In microbenchmark this function is ~4.6 times faster then
> console.debug.
>
> R=lushnikov@chromium.org,pfeldman@chromium.org
>
> Bug: none
> Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
> Change-Id: I3e0e231dde9d45116709d248f6e9e7ec7037e8e3
> Reviewed-on: https://chromium-review.googlesource.com/1077662
> Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
> Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#53462}
TBR=dgozman@chromium.org,lushnikov@chromium.org,pfeldman@chromium.org,kozyatinskiy@chromium.org
Change-Id: I1ebafd42db01d8a6435d58386f2c667b92db12f1
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: none
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Reviewed-on: https://chromium-review.googlesource.com/1082311
Reviewed-by: Sergiy Byelozyorov <sergiyb@chromium.org>
Commit-Queue: Sergiy Byelozyorov <sergiyb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53470}
A lot of different clients use console.debug as a message channel from
page to protocol client. console.debug is a little slow and not
designed for this use case.
This CL introduces new method: Runtime.installBinding. This method
installs binding function by given name on global object on each
inspected context including any context created later.
Binding function takes exactly one string argument. Each time when
binding function is called, Runtime.bindingCalled notification is
triggered and includes passed payload.
Binding function survives page reload and reinstalled right after
console object is setup. So installed binding can be used inside
script added by Page.addScriptToEvaluateOnNewDocument so client may do
something like:
Runtime.installBinding({name: 'send'});
Page.addScriptToEvaluateOnNewDocument({source: 'console.debug = send'});
.. navigate page ..
In microbenchmark this function is ~4.6 times faster then
console.debug.
R=lushnikov@chromium.org,pfeldman@chromium.org
Bug: none
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I3e0e231dde9d45116709d248f6e9e7ec7037e8e3
Reviewed-on: https://chromium-review.googlesource.com/1077662
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53462}
This reverts commit 003159e777.
Reason for revert: breaks roll into Chromium: https://ci.chromium.org/p/chromium/builders/luci.chromium.try/linux_chromium_headless_rel/3140
Original change's description:
> [inspector] RemoteObject.description should be empty for primitive type
>
> We currently report description field for numbers. On client side user
> can calculate description as remoteObject.unserializableValue ||
> (remoteObject.value + ''). Let's report description only for objects to
> simplify value -> remoteObject logic a bit.
>
> R=dgozman@chromium.org
> TBR=jgruber@chromium.org
>
> Bug: chromium:595206
> Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
> Change-Id: I91356a44aa3024e20c8f966869abf4a41b88e4bc
> Reviewed-on: https://chromium-review.googlesource.com/737485
> Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
> Reviewed-by: Pavel Feldman <pfeldman@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#53453}
TBR=dgozman@chromium.org,pfeldman@chromium.org,kozyatinskiy@chromium.org
Change-Id: Ifc184e1ac158d9ea7034922a7250444448fac49f
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:595206
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Reviewed-on: https://chromium-review.googlesource.com/1081207
Reviewed-by: Sergiy Byelozyorov <sergiyb@chromium.org>
Commit-Queue: Sergiy Byelozyorov <sergiyb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53461}
This is another step to remove a huge amount of legacy code from v8.
R=dgozman@chromium.org
Bug: v8:5530
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I634bda41c53a49dc4912291eb52f02847f56f4f3
Reviewed-on: https://chromium-review.googlesource.com/1080398
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53459}
We currently report description field for numbers. On client side user
can calculate description as remoteObject.unserializableValue ||
(remoteObject.value + ''). Let's report description only for objects to
simplify value -> remoteObject logic a bit.
R=dgozman@chromium.orgTBR=jgruber@chromium.org
Bug: chromium:595206
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I91356a44aa3024e20c8f966869abf4a41b88e4bc
Reviewed-on: https://chromium-review.googlesource.com/737485
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Pavel Feldman <pfeldman@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53453}
If async function A awaited async function B, stepOut from function B
should go to function A.
Bug: v8:7753
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Iedc1d8b85a52aa60519e56b319325436fc2168c9
Reviewed-on: https://chromium-review.googlesource.com/1054618
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53451}
New intstrumentation consists of:
- kAsyncFunctionSuspended when async function is suspended on await
(called on each await),
- kAsyncFunctionFinished when async function is finished.
Old instrumentation was based on reusing async function promise.
Using this promise produces couple side effects:
- for any promise instrumentation we first need to check if it is
special case for async function promise or not - it requires
expensive reading from promise object.
- we capture stack for async functions even if it does not contain
awaits.
- we do not properly cancel async task created for async function.
New intsrumntation resolved all these problems as well as provide
clear mapping between async task and generator which we can use later
to fetch scope information for async functions on pause.
R=dgozman@chromium.org,yangguo@chromium.org
Bug: v8:7078
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Ifdcec947d91e6e3d4d5f9029bc080a19b8e23d41
Reviewed-on: https://chromium-review.googlesource.com/1043096
Reviewed-by: Sathya Gunasekaran <gsathya@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53445}
With this CL we use interrupt for pause in two cases:
- when we process Debugger.pause on interruption,
- when we would like to break as soon as possible after OOM.
In all other cases, e.g. for async step into we use break
on function call by calling StepIn debugger action.
In mentioned cases we should not actually use interrupt as well:
- Debugger.pause in this case scheduled using interrupt and we
may just break right now without requesting another interrupt,
unfortunately blink side is not ready,
- we should use more reliable way to break right after near OOM
callback, otherwise we can get this callback, increase limit,
request break on next interrupt, before interrupt get another
huge memory allocation and crash.
There are couple advantages:
- we get much better break locations for async stepping
(see inspector tests expectations),
- we can remove DEBUG_BREAK interruption
(it should speedup blackboxing with async tasks, see
removed todo in debug.cc for details)
- it is required preparation step for async step out,
(see https://chromium-review.googlesource.com/c/v8/v8/+/1054618)
Bug: v8:7753
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Iabd7627dbffa9a0eab1736064caf589d02591926
Reviewed-on: https://chromium-review.googlesource.com/1054155
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53439}
Currently, we context allocate all parameters for generators.
With this CL, we keep arguments on stack (unless they escape to inner
closure) and copy them between the stack and the generator's register
file on suspend/resume. This will save context allocation in most cases.
Note: There is an asymmetry between suspend and resume.
- Suspend copies arguments and registers to the generator.
- Resume copies only the registers from the generator, the arguments
are copied by the ResumeGenerator trampoline.
Bug: v8:5164
Change-Id: I6333898c60abf461b1ab1b5c6d3dc7188fa95649
Reviewed-on: https://chromium-review.googlesource.com/1063712
Commit-Queue: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53327}
We need to change WasmExportedFunction to call imported functions via
the import table, so there will be no embedded call target.
This also removes the necessity to generate an unreachable call after
the runtime call for js-incompatible signatures.
R=titzer@chromium.org
Bug: chromium:843563,v8:6668
Change-Id: I82cb31930f6b61ad59fde63a8c5ae631da3d1a14
Reviewed-on: https://chromium-review.googlesource.com/1063771
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53239}
D8 enables the Wasm trap handler by default now, but we need to make sure the
older bounds check case still gets test coverage too, as bounds checks will
continue to be a supported configuration.
Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
Change-Id: I5b0bdded6929a9b3a8480e87d038398b8d2a0fd8
Reviewed-on: https://chromium-review.googlesource.com/1048835
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Eric Holk <eholk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53078}
If termination was requested on pause we should handle it properly as
soon as execution resumed.
R=yangguo@chromium.org
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Ica50500094138097f115545db716264126fbe59e
Reviewed-on: https://chromium-review.googlesource.com/1049486
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53074}
If there is more then one agent accepts current pause, we should resume
only when last agent is disabled.
R=dgozman@chromium.org
Bug: chromium:834056
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I2904b3f4ab76117511e16450dd575ebf3e20a068
Reviewed-on: https://chromium-review.googlesource.com/1041207
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52931}
This CL whitelists Console Command Line API callbacks on the V8 side.
Bug: chromium:810176
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I7afdd6bd4263cb4cb18bdf02b37ab3e822ae5c96
Reviewed-on: https://chromium-review.googlesource.com/1016094
Commit-Queue: Erik Luo <luoe@chromium.org>
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52747}
This function can be used to set breakpoint on any function call,
including native functions without source code, for them new method is
only one way to set breakpoint.
R=dgozman@chromium.org
Bug: chromium:828076
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Iae8f4805b6e860a7ca008041fdfbe75e43a1959c
Reviewed-on: https://chromium-review.googlesource.com/1023128
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52745}
These functions are now unused within V8, as we need tighter control in
mksnapshot for creating embedded.cc.
Embedders should switch to using SnapshotCreator directly.
Bug: v8:6666
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng
Change-Id: Id231b3d1fdf50e06c9278f13d095186364264b86
Reviewed-on: https://chromium-review.googlesource.com/1019442
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52692}
The handling of wasm breakpoints was prone to forget previously set
breakpoints when inserting new ones. In particular, adding breakpoints
in reverse order or adding more than 4 breakpoints would fail.
Change-Id: I94f314e86bdf9b53a4170ce1b6b47339b7cb7848
Reviewed-on: https://chromium-review.googlesource.com/1019302
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Stephan Herhut <herhut@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52691}
This CL allows SetPrototypeAdd and ArrayIteratorPrototypeNext
to be called on temporary objects during side effect free evaluation.
Bug: v8:7588
Change-Id: Id77848e48d98c243de91bc6c0fae5a0877e693d4
Reviewed-on: https://chromium-review.googlesource.com/998439
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52548}
This is a reland of 7a2c371383
Original change's description:
> [debug] introduced runtime side effect check
>
> This CL demonstrates minimum valuable addition to existing debug evaluate
> without side effects mechanism.
> With this CL user can evaluate expressions like:
> [a,b] // create any kind of temporary array literals
> [a,b].reduce((x,y) => x + y, 0); // use reduce method
> [1,2,3].fill(2); // change temporary arrays
>
> The core idea: any change of the object created during evaluation without
> side effects is side effect free. As soon as we try to store this temporary
> object to object existed before evaluation we will terminate execution.
>
> Implementation:
> - track all objects allocated during evaluation and mark them as temporary,
> - patch all bytecodes which change objects.
>
> A little more details (including performance analysis): [1].
>
> [1] https://docs.google.com/document/d/10qqAtZADspPnpYa6SEdYRxrddfKIZJIzbLtGpsZQkRo/edit#
>
> Bug: v8:7588
> Change-Id: I69f7b96e1ebd7ad0022219e8213211c7be72a111
> Reviewed-on: https://chromium-review.googlesource.com/972615
> Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#52370}
Bug: v8:7588
Change-Id: Ibc92bf19155f2ddaedae39b0c576b994e84afcf8
Reviewed-on: https://chromium-review.googlesource.com/996760
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52373}
This reverts commit 7a2c371383.
Reason for revert: msan is broken
Original change's description:
> [debug] introduced runtime side effect check
>
> This CL demonstrates minimum valuable addition to existing debug evaluate
> without side effects mechanism.
> With this CL user can evaluate expressions like:
> [a,b] // create any kind of temporary array literals
> [a,b].reduce((x,y) => x + y, 0); // use reduce method
> [1,2,3].fill(2); // change temporary arrays
>
> The core idea: any change of the object created during evaluation without
> side effects is side effect free. As soon as we try to store this temporary
> object to object existed before evaluation we will terminate execution.
>
> Implementation:
> - track all objects allocated during evaluation and mark them as temporary,
> - patch all bytecodes which change objects.
>
> A little more details (including performance analysis): [1].
>
> [1] https://docs.google.com/document/d/10qqAtZADspPnpYa6SEdYRxrddfKIZJIzbLtGpsZQkRo/edit#
>
> Bug: v8:7588
> Change-Id: I69f7b96e1ebd7ad0022219e8213211c7be72a111
> Reviewed-on: https://chromium-review.googlesource.com/972615
> Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#52370}
TBR=ulan@chromium.org,rmcilroy@chromium.org,yangguo@chromium.org,kozyatinskiy@chromium.org,leszeks@chromium.org
Change-Id: Ied1739c6308b13a4981189e0999f5912316cf456
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:7588
Reviewed-on: https://chromium-review.googlesource.com/996135
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52371}
This CL demonstrates minimum valuable addition to existing debug evaluate
without side effects mechanism.
With this CL user can evaluate expressions like:
[a,b] // create any kind of temporary array literals
[a,b].reduce((x,y) => x + y, 0); // use reduce method
[1,2,3].fill(2); // change temporary arrays
The core idea: any change of the object created during evaluation without
side effects is side effect free. As soon as we try to store this temporary
object to object existed before evaluation we will terminate execution.
Implementation:
- track all objects allocated during evaluation and mark them as temporary,
- patch all bytecodes which change objects.
A little more details (including performance analysis): [1].
[1] https://docs.google.com/document/d/10qqAtZADspPnpYa6SEdYRxrddfKIZJIzbLtGpsZQkRo/edit#
Bug: v8:7588
Change-Id: I69f7b96e1ebd7ad0022219e8213211c7be72a111
Reviewed-on: https://chromium-review.googlesource.com/972615
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52370}
This patch teaches Runtime.callFunctionOn to run evals inside its
task. This is aligned with how Runtime.evaluate works.
R=kozy
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I3189beebc9020703d2b2e23a7c828a2394d43910
Reviewed-on: https://chromium-review.googlesource.com/994070
Commit-Queue: Andrey Lushnikov <lushnikov@chromium.org>
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52339}
We don't want to run into the situation of breaking inside of
debug-evaluate. That would get even more confusing with throw-on-side-effect.
R=kozyatinskiy@chromium.org
Bug: v8:7592
Change-Id: I93f5de63d8943792ff000dbf7c6311df655d3793
Reviewed-on: https://chromium-review.googlesource.com/978164
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Commit-Queue: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52227}
Now, 'queryObjects' takes an optional 'objectGroup' argument,
allowing the frontend to release the response value.
This is important because each call produces a new Array, which
could not be released before.
Bug: chromium:815263
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I18c9a68c4ba45020fce9eea63cb263396a18d498
Reviewed-on: https://chromium-review.googlesource.com/935153
Commit-Queue: Erik Luo <luoe@chromium.org>
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Cr-Commit-Position: refs/heads/master@{#51938}
Runtime.terminateExecution terminates current or next JavaScript
call. Termination flag is automatically reset as soon as v8 call
or microtasks are completed.
R=pfeldman@chromium.org
Bug: chromium:820640
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Ie21c123be3a61fe25cf6e04c38a8b6c664622ed7
Reviewed-on: https://chromium-review.googlesource.com/957386
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Cr-Commit-Position: refs/heads/master@{#51912}
- Label as "bigint" in DevTools heap snapshot viewer
- Treat as new primitive in injected-script-source
- Show primitive value as property for BigIntObject
- Adds the "n" suffix onto description, both with/without inspector
being present
Bug: v8:7486
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng;master.tryserver.blink:linux_trusty_blink_rel;master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: I47a02e32f9bdd9124a6c91056965574ecd443867
Reviewed-on: https://chromium-review.googlesource.com/940804
Commit-Queue: Erik Luo <luoe@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Alexei Filippov <alph@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Cr-Commit-Position: refs/heads/master@{#51855}
The debugger script implementation had its own way to write
uint32_t values to a string as hex values. This removes the
custom code and uses a shared implementation in String16Builder
instead.
The observable effect is that script hashes are now lower-case
and the character sequence is reversed for each 8-character
pair.
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Ib21769fbe10c24055fbd3fa9573bc5c2d72f6a74
Reviewed-on: https://chromium-review.googlesource.com/951303
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Commit-Queue: Stephan Herhut <herhut@chromium.org>
Cr-Commit-Position: refs/heads/master@{#51801}
Previously GetSharedFunctionInfoForStreamedScript didn't either check the
compilation cache or put the result of compilation into the compilation
cache. This would mean future compiles would need to re-parse / compile
the same script even if the isolate had already seen it. This CL
fixes this.
Also refactors the compilation pipelines to ensure we call debug->OnAfterCompile()
for all script compiles even when loading from a cache.
BUG=v8:5203
Change-Id: I4b06bdfc566425f4e6d70fc3e6e080b0dc497d48
Reviewed-on: https://chromium-review.googlesource.com/939464
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Mythri Alle <mythria@chromium.org>
Cr-Commit-Position: refs/heads/master@{#51607}
This reverts commit 2542720357.
Reason for revert: code-coverage failures on gc-stress bot: https://build.chromium.org/p/client.v8/builders/V8%20Linux64%20GC%20Stress%20-%20custom%20snapshot/builds/17956
Original change's description:
> Reland: [Compiler] Use CompilationCache for StreamedScript compilation.
>
> Previously GetSharedFunctionInfoForStreamedScript didn't either check the
> compilation cache or put the result of compilation into the compilation
> cache. This would mean future compiles would need to re-parse / compile
> the same script even if the isolate had already seen it. This CL
> fixes this.
>
> Also refactors the compilation pipelines to ensure we call debug->OnAfterCompile()
> for all script compiles even when loading from a cache.
>
> BUG=v8:5203
> Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
>
> Change-Id: I0a74c5b67bfaca5e50511d5f72da0ab53d8457f6
> Reviewed-on: https://chromium-review.googlesource.com/937724
> Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
> Reviewed-by: Mythri Alle <mythria@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#51594}
TBR=rmcilroy@chromium.org,yangguo@chromium.org,mythria@chromium.org
Change-Id: I784b9eeff75a677b9f2276fa05a0d1af09772baa
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:5203
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
Reviewed-on: https://chromium-review.googlesource.com/939401
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#51596}
Previously GetSharedFunctionInfoForStreamedScript didn't either check the
compilation cache or put the result of compilation into the compilation
cache. This would mean future compiles would need to re-parse / compile
the same script even if the isolate had already seen it. This CL
fixes this.
Also refactors the compilation pipelines to ensure we call debug->OnAfterCompile()
for all script compiles even when loading from a cache.
BUG=v8:5203
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: I0a74c5b67bfaca5e50511d5f72da0ab53d8457f6
Reviewed-on: https://chromium-review.googlesource.com/937724
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Mythri Alle <mythria@chromium.org>
Cr-Commit-Position: refs/heads/master@{#51594}
We already cleanup these scripts on frontend side. It is crucial to
cleanup them on backend side as well, since some web applications use
following logic: get some data from network, add this data to buffer,
try to parse buffer using JSON.parse. On each unsuccessfull JSON.parse
we get another scriptFailedToParse event.
Frontend logic of discarding scripts: https://goo.gl/FDtaWK
Some idea of smarter logic here: track what script ids are reported
using protocol and cleanup only script ids which reported not only as
part of scriptFailedToParse event.
R=alph@chromium.org
Bug: chromium:810812
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Ifd67764c232e4abc7dc6e8e69a651bf9ac0e381b
Reviewed-on: https://chromium-review.googlesource.com/919834
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Alexei Filippov <alph@chromium.org>
Cr-Commit-Position: refs/heads/master@{#51337}
We used to calculate hash in completely incorrect way. We use each
forth character to calculate hash but we should use each one.
R=dgozman@chromium.org
Bug: v8:7426
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Iaaa317bbf3b3ef71632735dfd069db450283b6f4
Reviewed-on: https://chromium-review.googlesource.com/909586
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Cr-Commit-Position: refs/heads/master@{#51191}
This is a reland of 0db74d4974.
Original change's description:
> [test] Random seed processor
>
> 1. --total-timeout-sec now available for ./run-tests.py. It can be
> useful with infinite seed stressing
> 2. random seed dropped from the context. Now JSON progress indicator
> gets it from the list of command args.
>
> Bug: v8:6917
> Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
> Change-Id: I73e535bc8face9b913c696b8d5e3a246fa231004
> Reviewed-on: https://chromium-review.googlesource.com/888524
> Commit-Queue: Michał Majewski <majeski@google.com>
> Reviewed-by: Michael Achenbach <machenbach@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#50964}
Bug: v8:6917
Change-Id: I1ea376a4abffce5ab65f4834ea7e6d6011765ffa
Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
Reviewed-on: https://chromium-review.googlesource.com/894204
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michał Majewski <majeski@google.com>
Cr-Commit-Position: refs/heads/master@{#50978}
This reverts commit 0db74d4974.
Reason for revert: https://chromium-swarm.appspot.com/task?id=3b609f9976bac610&refresh=10&show_raw=1
Original change's description:
> [test] Random seed processor
>
> 1. --total-timeout-sec now available for ./run-tests.py. It can be
> useful with infinite seed stressing
> 2. random seed dropped from the context. Now JSON progress indicator
> gets it from the list of command args.
>
> Bug: v8:6917
> Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
> Change-Id: I73e535bc8face9b913c696b8d5e3a246fa231004
> Reviewed-on: https://chromium-review.googlesource.com/888524
> Commit-Queue: Michał Majewski <majeski@google.com>
> Reviewed-by: Michael Achenbach <machenbach@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#50964}
TBR=machenbach@chromium.org,sergiyb@chromium.org,majeski@google.com
Change-Id: I2d96ea328cda2d09b01ff455e47c77d567fafe00
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:6917
Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
Reviewed-on: https://chromium-review.googlesource.com/894522
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50970}
1. --total-timeout-sec now available for ./run-tests.py. It can be
useful with infinite seed stressing
2. random seed dropped from the context. Now JSON progress indicator
gets it from the list of command args.
Bug: v8:6917
Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
Change-Id: I73e535bc8face9b913c696b8d5e3a246fa231004
Reviewed-on: https://chromium-review.googlesource.com/888524
Commit-Queue: Michał Majewski <majeski@google.com>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50964}
Instead of requiring the pattern that a SuspendGenerator must be
followed by a Return, make SuspendGenerator return directly. This can,
in the future, simplify some of the reasoning around generator suspends.
Change-Id: I94c0156a89dc0e1c0bc306bc57acf766f3b4deb5
Reviewed-on: https://chromium-review.googlesource.com/857463
Reviewed-by: Georg Neis <neis@chromium.org>
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50748}
It was shipped in Chrome 63.
Bug: v8:5855
Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
Change-Id: Icc00b8300622d1c7b5662be8ac5e425b9781f666
Reviewed-on: https://chromium-review.googlesource.com/858381
Commit-Queue: Adam Klein <adamk@chromium.org>
Reviewed-by: Sathya Gunasekaran <gsathya@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50558}
https://github.com/tc39/ecma262/pull/988 gained concensus during the
september 2017 TC39 meetings. This moves the load of the "next" method
to the very beginning of the iteration protocol, rather than during
each iteration step.
This impacts:
- yield*
- for-of loops
- spread arguments
- array spreads
In the v8 implementation, this also affects async iteration versions of
these things (the sole exception being the Async-From-Sync iterator,
which requires a few more changes to work with this, likely done in a
followup patch).
This change introduces a new AST node, ResolvedProperty, which can be used
as a callee by Call nodes to produce the same bytecode as Property calls,
without observably re-loading the property. This is used in several
AST-desugarings involving the iteration protocol.
BUG=v8:6861, v8:5699
R=rmcilroy@chromium.orgTBR=neis@chromium.org, adamk@chromium.org
Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
Change-Id: I9685db6e85315ba8a2df87a4537c2bf491e1e35b
Reviewed-on: https://chromium-review.googlesource.com/857593
Commit-Queue: Caitlin Potter <caitp@igalia.com>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50518}
Before this, only the [[ProxyHandler]] was set to null during revocation
of the Proxy through either the v8::Proxy::Revoke() or the
Proxy.revocable() API. To be consistent with the spec, the Proxy's
target is set to null as well. This change should not be observable
through JS, since the check for if the Proxy is revoked should always
use the handler. But the changed value is exposed through the public
v8::Proxy::GetTarget() API, which is used by the inspector API and
Node.js.
Also included is a much more comprehensive test for Inspector's support
for Proxy, which prior to this commit did not work as intended.
Bug:
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel;master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: I727607ec2b3cea8642cd636573932c1e6bb5cc07
Reviewed-on: https://chromium-review.googlesource.com/854676
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50476}
This reverts commit bf4cc9ee15.
Reason for revert: Breaks windows with msvc and linux with gcc
https://build.chromium.org/p/client.v8/builders/V8%20Win64%20-%20msvc/builds/841https://build.chromium.org/p/client.v8/builders/V8%20Linux%20gcc%204.8/builds/17265
Original change's description:
> [esnext] load `iterator.next` only once at beginning of iteration
>
> https://github.com/tc39/ecma262/pull/988 gained concensus during the
> september 2017 TC39 meetings. This moves the load of the "next" method
> to the very beginning of the iteration protocol, rather than during
> each iteration step.
>
> This impacts:
>
> - yield*
> - for-of loops
> - spread arguments
> - array spreads
>
> In the v8 implementation, this also affects async iteration versions of
> these things (the sole exception being the Async-From-Sync iterator,
> which requires a few more changes to work with this, likely done in a
> followup patch).
>
> This change introduces a new AST node, ResolvedProperty, which can be used
> as a callee by Call nodes to produce the same bytecode as Property calls,
> without observably re-loading the property. This is used in several
> AST-desugarings involving the iteration protocol.
>
> BUG=v8:6861, v8:5699
> R=rmcilroy@chromium.org, neis@chromium.org, adamk@chromium.org
>
> Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
> Change-Id: Ib81106a0182687fc5efea0bc32302ad06376773b
> Reviewed-on: https://chromium-review.googlesource.com/687997
> Commit-Queue: Caitlin Potter <caitp@igalia.com>
> Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
> Reviewed-by: Adam Klein <adamk@chromium.org>
> Reviewed-by: Georg Neis <neis@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#50452}
TBR=rmcilroy@chromium.org,adamk@chromium.org,neis@chromium.org,caitp@igalia.com,caitp@chromium.org
Change-Id: I1797c0d596dfd6850d6f0f505f591a7a990dd1f1
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:6861, v8:5699
Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
Reviewed-on: https://chromium-review.googlesource.com/857616
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50454}
https://github.com/tc39/ecma262/pull/988 gained concensus during the
september 2017 TC39 meetings. This moves the load of the "next" method
to the very beginning of the iteration protocol, rather than during
each iteration step.
This impacts:
- yield*
- for-of loops
- spread arguments
- array spreads
In the v8 implementation, this also affects async iteration versions of
these things (the sole exception being the Async-From-Sync iterator,
which requires a few more changes to work with this, likely done in a
followup patch).
This change introduces a new AST node, ResolvedProperty, which can be used
as a callee by Call nodes to produce the same bytecode as Property calls,
without observably re-loading the property. This is used in several
AST-desugarings involving the iteration protocol.
BUG=v8:6861, v8:5699
R=rmcilroy@chromium.org, neis@chromium.org, adamk@chromium.org
Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
Change-Id: Ib81106a0182687fc5efea0bc32302ad06376773b
Reviewed-on: https://chromium-review.googlesource.com/687997
Commit-Queue: Caitlin Potter <caitp@igalia.com>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50452}
I added additional exception logging in the execution.py since
errors in processing results were really difficult to debug.
There is a problem on Windows with class serialization when
it comes from dynamically loaded module. To fix it I moved all
output processors to the tools/testrunner/outproc/ and import
them in test/*/testcfg.py.
Bug: v8:6917
Change-Id: Ida604641d659b006e91faf1d56a37769ec47f5f3
Reviewed-on: https://chromium-review.googlesource.com/842784
Commit-Queue: Michał Majewski <majeski@google.com>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50361}
This reverts commit 1685b5d27a.
Reason for revert: Was probably caused by infra change:
https://crrev.com/c/845781
Original change's description:
> Revert "[test] Move has unexpected output to outproc."
>
> This reverts commit 71605b3ea4.
>
> Reason for revert: Seems to break static-initializers step:
> https://build.chromium.org/p/client.v8/builders/V8%20Linux64/builds/22156
>
> Original change's description:
> > [test] Move has unexpected output to outproc.
> >
> > Expected outcomes optimized to serialize [PASS] as None.
> >
> > Keeping expected outcomes inside output processors should be
> > optimized in the future. Few possible optimizations:
> > - separate classes for tests that are expected to PASS - done as
> > an example in mozilla test suite.
> > - cache output processors inside testcase.
> > - share output processors between copies of the same test - needs
> > some updates to the create_variant to update outproc only if
> > expected outcomes changed.
> >
> > Bug: v8:6917
> > Change-Id: Ie73f1dcdf17fdfc65bce27228f818b1dd1e420c9
> > Reviewed-on: https://chromium-review.googlesource.com/843025
> > Commit-Queue: Michael Achenbach <machenbach@chromium.org>
> > Reviewed-by: Michael Achenbach <machenbach@chromium.org>
> > Cr-Commit-Position: refs/heads/master@{#50347}
>
> TBR=machenbach@chromium.org,sergiyb@chromium.org,majeski@google.com
>
> Change-Id: Ice1f3aee0a26f7f38996459d38fd6e0bd964113d
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Bug: v8:6917
> Reviewed-on: https://chromium-review.googlesource.com/849572
> Reviewed-by: Bill Budge <bbudge@chromium.org>
> Commit-Queue: Bill Budge <bbudge@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#50348}
TBR=bbudge@chromium.org,machenbach@chromium.org,sergiyb@chromium.org,majeski@google.com
Change-Id: I7a522b6487de6e96985d223524533493eb9171f0
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:6917
Reviewed-on: https://chromium-review.googlesource.com/848975
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50350}
This reverts commit 71605b3ea4.
Reason for revert: Seems to break static-initializers step:
https://build.chromium.org/p/client.v8/builders/V8%20Linux64/builds/22156
Original change's description:
> [test] Move has unexpected output to outproc.
>
> Expected outcomes optimized to serialize [PASS] as None.
>
> Keeping expected outcomes inside output processors should be
> optimized in the future. Few possible optimizations:
> - separate classes for tests that are expected to PASS - done as
> an example in mozilla test suite.
> - cache output processors inside testcase.
> - share output processors between copies of the same test - needs
> some updates to the create_variant to update outproc only if
> expected outcomes changed.
>
> Bug: v8:6917
> Change-Id: Ie73f1dcdf17fdfc65bce27228f818b1dd1e420c9
> Reviewed-on: https://chromium-review.googlesource.com/843025
> Commit-Queue: Michael Achenbach <machenbach@chromium.org>
> Reviewed-by: Michael Achenbach <machenbach@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#50347}
TBR=machenbach@chromium.org,sergiyb@chromium.org,majeski@google.com
Change-Id: Ice1f3aee0a26f7f38996459d38fd6e0bd964113d
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:6917
Reviewed-on: https://chromium-review.googlesource.com/849572
Reviewed-by: Bill Budge <bbudge@chromium.org>
Commit-Queue: Bill Budge <bbudge@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50348}
Expected outcomes optimized to serialize [PASS] as None.
Keeping expected outcomes inside output processors should be
optimized in the future. Few possible optimizations:
- separate classes for tests that are expected to PASS - done as
an example in mozilla test suite.
- cache output processors inside testcase.
- share output processors between copies of the same test - needs
some updates to the create_variant to update outproc only if
expected outcomes changed.
Bug: v8:6917
Change-Id: Ie73f1dcdf17fdfc65bce27228f818b1dd1e420c9
Reviewed-on: https://chromium-review.googlesource.com/843025
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50347}
Add an easy way to preview ArrayBuffer as a typed array. This change
will always allow previewing ArrayBuffer instances as Uint8Array and
Int8Array. ArrayBuffer instances that have even length will allow
Int16Array preview and ArrayBuffers that have length divisible by 4 will
allow Int32Array previews.
Bug:
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I07440147cc9e83c8a987f9316bd8d1b936db2717
Reviewed-on: https://chromium-review.googlesource.com/842472
Commit-Queue: Eugene Ostroukhov <eostroukhov@chromium.org>
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50315}
All get outcome logic moved out from testsuite which makes output
processors serializable. Output processors that are not global
are stored inside testcase to share them with all test copies.
Bug: v8:6917
Cq-Include-Trybots: master.tryserver.v8:v8_linux_noi18n_rel_ng
Change-Id: I625466b2b00565d885556f96cab03d8d16fa7ff4
Reviewed-on: https://chromium-review.googlesource.com/837069
Commit-Queue: Michał Majewski <majeski@google.com>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Sergiy Byelozyorov <sergiyb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50275}
Pass shell name instead of an absolute path.
Bug: v8:796166
Change-Id: Ia9472e893fd2cb3fde2a94997f3e9daf30da06ea
Reviewed-on: https://chromium-review.googlesource.com/833917
Commit-Queue: Michał Majewski <majeski@google.com>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50207}
We should not report promise created for async function as candidate
for stepping. Regular StepInto works fine in this case.
TBR=dgozman@chromium.org
Bug: none
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I8dafec5417df0de593cb2a1c06d6a11093e7c64b
Reviewed-on: https://chromium-review.googlesource.com/828024
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50176}
- All testcase/testsuite/variant generator subclasses renamed to
just TestCase/TestSuite/VariantGenerator since they're private
implementation.
- All `testcase` variables renamed to `test` to not conflict with
a module name.
- No more two statements in the same line.
- Removed some unused testsuite methods.
Bug: v8:6917
Cq-Include-Trybots: master.tryserver.v8:v8_linux_noi18n_rel_ng
Change-Id: I7710f3419f738a5f9ddca73765dd2cad2e35b952
Reviewed-on: https://chromium-review.googlesource.com/823964
Reviewed-by: Sergiy Byelozyorov <sergiyb@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michał Majewski <majeski@google.com>
Cr-Commit-Position: refs/heads/master@{#50076}
- create testcase subclass for each test
- move get_command, get_source from suite to test
- promises-aplus tests are broken
- moving expected outcomes etc. is still in progress
Bug: v8:6917
Cq-Include-Trybots: master.tryserver.v8:v8_linux_noi18n_rel_ng
Change-Id: I006e64ecf51dda95c41dff88c68b24f17a638566
Reviewed-on: https://chromium-review.googlesource.com/798331
Commit-Queue: Michał Majewski <majeski@google.com>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50065}
This is a reland of c3bd741efd
Original change's description:
> Fix "this" value in lazily-parsed module functions.
>
> When preparsing top-level functions in a module, we didn't track
> unresolved variables. Consequently, "this" ended up referencing
> the global "this", which has the wrong value (in a module "this"
> is supposed to be the undefined value).
>
> This patch fixes that. This also lets us stop forcing context
> allocation of all variables in module scopes, which the patch
> takes care of as well.
>
> Bug: chromium:791334
> Change-Id: Ifac1f1adc033f3facfb3d29dd4bca32ee27bffcf
> Reviewed-on: https://chromium-review.googlesource.com/808938
> Reviewed-by: Marja Hölttä <marja@chromium.org>
> Reviewed-by: Adam Klein <adamk@chromium.org>
> Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
> Commit-Queue: Georg Neis <neis@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#50025}
TBR=adamk@chromium.orgTBR=kozyatinskiy@chromium.org
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Bug: chromium:791334
Change-Id: I57acc7b84a345565b36cbb55924fa2ff9b449eec
Reviewed-on: https://chromium-review.googlesource.com/822341
Commit-Queue: Georg Neis <neis@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50045}
This reverts commit c3bd741efd.
Reason for revert: Breaks layout tests:
https://build.chromium.org/p/client.v8.fyi/builders/V8-Blink%20Linux%2064/builds/20384
Original change's description:
> Fix "this" value in lazily-parsed module functions.
>
> When preparsing top-level functions in a module, we didn't track
> unresolved variables. Consequently, "this" ended up referencing
> the global "this", which has the wrong value (in a module "this"
> is supposed to be the undefined value).
>
> This patch fixes that. This also lets us stop forcing context
> allocation of all variables in module scopes, which the patch
> takes care of as well.
>
> Bug: chromium:791334
> Change-Id: Ifac1f1adc033f3facfb3d29dd4bca32ee27bffcf
> Reviewed-on: https://chromium-review.googlesource.com/808938
> Reviewed-by: Marja Hölttä <marja@chromium.org>
> Reviewed-by: Adam Klein <adamk@chromium.org>
> Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
> Commit-Queue: Georg Neis <neis@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#50025}
TBR=adamk@chromium.org,marja@chromium.org,neis@chromium.org,kozyatinskiy@chromium.org
Change-Id: I81f69334ed2ce104c00e6205d50001e4bdf07d15
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:791334
Reviewed-on: https://chromium-review.googlesource.com/822258
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50036}
When preparsing top-level functions in a module, we didn't track
unresolved variables. Consequently, "this" ended up referencing
the global "this", which has the wrong value (in a module "this"
is supposed to be the undefined value).
This patch fixes that. This also lets us stop forcing context
allocation of all variables in module scopes, which the patch
takes care of as well.
Bug: chromium:791334
Change-Id: Ifac1f1adc033f3facfb3d29dd4bca32ee27bffcf
Reviewed-on: https://chromium-review.googlesource.com/808938
Reviewed-by: Marja Hölttä <marja@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Commit-Queue: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50025}
If we have several scripts with the same url (see many <script> tags in
one page), then we try to set breakpoint only in script with given
lineNumber inside and ignore all other scripts. We should follow the
same logic when we capture hint for later breakpoint restore.
R=yangguo@chromium.org
Bug: none
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I44a332ac64f62ec9a0d24d5fe4688f8ced125e39
Reviewed-on: https://chromium-review.googlesource.com/821053
Commit-Queue: Yang Guo <yangguo@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50019}
It will help us to preserve some scripts for user.
R=alph@chromium.orgTBR=jgruber@chromium.org
Bug: chromium:655701
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: I6d42434148c2d9eb41c3a2af906e8c14ccf8d9a9
Reviewed-on: https://chromium-review.googlesource.com/806741
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Alexei Filippov <alph@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49913}
- Implement RunMicrotasks in CSA to prevent a potentially large number
of jumps between C++ and JS code while consuming te queue. Appears to
provide a ~60% speedup in microtask-heavy code, which from limited
testing appears to scale linearly.
The code-stub microtask pump bails out to the old C++ microtask pump
if it encounters a CallHandlerInfo microtask, and remains in C++ for
the remainder of the queue (returning to the JS/stub implementation
after the bailed out queue is exhausted).
- Add a variation of JSEntryStub which enters the new RunMicrotasks code
stub.
- Add a new RunMicrotasks helper to Execution, which uses the
RunMicrotasks entry stub.
Bug:
Change-Id: I4667d4dd633d24455ea5d7cef239da0af1a7365e
Reviewed-on: https://chromium-review.googlesource.com/650486
Commit-Queue: Caitlin Potter <caitp@igalia.com>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49842}
Aligns console.count() behavior with spec, which says the default label
should be "default" when the label provided is not defined.
Bug: chromium:700624
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Ie58af210d300ef3151082b23187dd18e356f5de8
Reviewed-on: https://chromium-review.googlesource.com/780620
Commit-Queue: Erik Luo <luoe@chromium.org>
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49804}
Similar to Firefox and Safari, calling console.time() repeatedly with
the same label will now produce a console warning indicating that the
label already exists. Similarly for console.timeEnd() as well.
Bug: chromium:727514
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Id644ee107b09e7f4686fff44c5f32d31c88371ad
Reviewed-on: https://chromium-review.googlesource.com/794345
Commit-Queue: Erik Luo <luoe@chromium.org>
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49803}
Some embedders primitive can trigger execution in current JavaScript
instance or in another (e.g. MessageChannel).
With this CL external async task can be local as well.
R=dgozman@chromium.org
Bug: chromium:661705
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I82c68a021c2c25bc67a706c4bfed8c1a2b2388c5
Reviewed-on: https://chromium-review.googlesource.com/792015
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49728}
If async stack is longer then max depth, we add externalParent as id,
client can fetch next max depth async stacks by Debugger.getStackTrace.
R=dgozman@chromium.org
Bug: chromium:778796
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I89d461e672251f03fb239f4f16ae3b0374fce766
Reviewed-on: https://chromium-review.googlesource.com/776242
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49595}
If protocol client needs to make step-into async call:
- pause before async call using any Debugger agent capabilities,
- call Debugger.stepInto with breakOnAsyncCall flag,
- wait for Debugger.paused event, this event will contain
asyncCallStackTrace if async call is scheduled,
- call Debugger.pauseOnAsyncCall on each known target,
- resume execution in current debugger by Debugger.resume.
Bug: chromium:778796
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I40c56278e7b1ceafc3bf81608b8ca6716c2b3168
Reviewed-on: https://chromium-review.googlesource.com/773573
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49594}
Sometimes we need to capture stack trace on one debugger and use it
later as a parent stack on another debugger (e.g. worker.postMessage).
This CL includes following addition to our protocol and v8-inspector.h:
- added Runtime.StackTraceId, this id represents stack trace captured
on debugger with given id,
- protocol client can fetch Runtime.StackTrace by
Runtime.StacKTraceId using Debugger.getStackTrace method,
- externalParent field is added to Debugger.paused event, it may
contain external parent stack trace,
- V8Inspector::storeCurrentStackTrace captures current stack trace
and returns V8StackTraceId for embedder this id can be used as
argument for V8Inspector::externalAsyncTaskStarted and
V8Inspector::externalAsyncTaskFinished method. Any async stack
trace captured between these calls will get passed external stack
trace as external parent. These methods are designed to be called
on different debuggers. If async task is scheduled and started on
one debugger user should continue to use asyncTask* API,
- Debugger.enable methods returns unique debuggerId.
TBR=dgozman@chromium.org,jgruber@chromium.org
Bug: chromium:778796
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel;master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: I2c1a2b2e30ed69ccb61d10f08686f4edb09f50e4
Reviewed-on: https://chromium-review.googlesource.com/786274
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49591}
This reverts commit 3a41b697cd.
Reason for revert: Break msvc: https://build.chromium.org/p/client.v8/builders/V8%20Win64%20-%20msvc/builds/250
Original change's description:
> [inspector] introduced stackTraceId and externalAsyncTask API
>
> Sometimes we need to capture stack trace on one debugger and use it
> later as a parent stack on another debugger (e.g. worker.postMessage).
>
> This CL includes following addition to our protocol and v8-inspector.h:
> - added Runtime.StackTraceId, this id represents stack trace captured
> on debugger with given id,
> - protocol client can fetch Runtime.StackTrace by
> Runtime.StacKTraceId using Debugger.getStackTrace method,
> - externalParent field is added to Debugger.paused event, it may
> contain external parent stack trace,
> - V8Inspector::storeCurrentStackTrace captures current stack trace
> and returns V8StackTraceId for embedder this id can be used as
> argument for V8Inspector::externalAsyncTaskStarted and
> V8Inspector::externalAsyncTaskFinished method. Any async stack
> trace captured between these calls will get passed external stack
> trace as external parent. These methods are designed to be called
> on different debuggers. If async task is scheduled and started on
> one debugger user should continue to use asyncTask* API,
> - Debugger.enable methods returns unique debuggerId.
>
> Bug: chromium:778796
> Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel;master.tryserver.chromium.linux:linux_chromium_rel_ng
> Change-Id: I16aba0d04bfcea90f3e187e635a0588c92354539
> Reviewed-on: https://chromium-review.googlesource.com/754183
> Reviewed-by: Jakob Gruber <jgruber@chromium.org>
> Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
> Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#49582}
TBR=dgozman@chromium.org,pfeldman@chromium.org,yangguo@chromium.org,kozyatinskiy@chromium.org,jgruber@chromium.org
Change-Id: I9b52354fa0841e5148596cf594317f2e5fe508ea
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:778796
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel;master.tryserver.chromium.linux:linux_chromium_rel_ng
Reviewed-on: https://chromium-review.googlesource.com/786152
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49584}
Sometimes we need to capture stack trace on one debugger and use it
later as a parent stack on another debugger (e.g. worker.postMessage).
This CL includes following addition to our protocol and v8-inspector.h:
- added Runtime.StackTraceId, this id represents stack trace captured
on debugger with given id,
- protocol client can fetch Runtime.StackTrace by
Runtime.StacKTraceId using Debugger.getStackTrace method,
- externalParent field is added to Debugger.paused event, it may
contain external parent stack trace,
- V8Inspector::storeCurrentStackTrace captures current stack trace
and returns V8StackTraceId for embedder this id can be used as
argument for V8Inspector::externalAsyncTaskStarted and
V8Inspector::externalAsyncTaskFinished method. Any async stack
trace captured between these calls will get passed external stack
trace as external parent. These methods are designed to be called
on different debuggers. If async task is scheduled and started on
one debugger user should continue to use asyncTask* API,
- Debugger.enable methods returns unique debuggerId.
Bug: chromium:778796
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel;master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: I16aba0d04bfcea90f3e187e635a0588c92354539
Reviewed-on: https://chromium-review.googlesource.com/754183
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49582}
Old instrumentation was designed to collect promise creation stack and
promise scheduled stack together. In DevTools for last 6 months we
show only creation stack for promises. We got strong support from users
for new model. Now we can drop support for scheduled stacks and
simplify implementation.
New promise instrumentation is straightforward:
- we send kDebugPromiseThen when promise is created by .then call,
- we send kDebugPromiseCatch when promise is created by .catch call,
- we send kDebugWillHandle before chained callback and kDebugDidHandle
after chained callback,
- and we send separate kDebugAsyncFunctionPromiseCreated for internal
promise inside async await function.
Advantages:
- we reduce amount of captured stacks (we do not capture stack for
promise that constructed not by .then or .catch),
- we can consider async task related to .then and .catch as one shot
since chained callback is executed once,
- on V8 side we can implement required instrumentation using only
promise hooks,
Disadvantage:
- see await-promise test, sometimes scheduled stack was useful since we
add catch handler in native code,
Implementation details:
- on kInit promise hook we need to figure out why promise was created.
We analyze builtin functions until first user defined function on
current stack. If there is kAsyncFunctionPromiseCreate function then
we send kDebugAsyncFunctionPromiseCreated event. If there is
kPromiseThen or kPromiseCatch then only if this function is bottom
builtin function we send corresponded event to inspector. We need it
because Promise.all internally calls .then and in this case we have
Promise.all and Promise.then on stack at the same time and we do not
need to report this internally created promise to inspector.
Bug: chromium:778796
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I53f47ce8c5c4a9897655c3396c249ea59529ae47
Reviewed-on: https://chromium-review.googlesource.com/765208
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Sathya Gunasekaran <gsathya@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49553}
When collecting source ranges for conditionals (`a ? b : c`), include
the '?' and ':' tokens in the then- and else ranges, respectively.
Bug: v8:7098
Change-Id: I22315e2040c96c977e0b49e1fafe4228a6558471
Reviewed-on: https://chromium-review.googlesource.com/778321
Reviewed-by: Marja Hölttä <marja@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49484}
At the moment the inspector tests do not dispose the isolate. This is a
problem because the disposal of the isolate is used to stop the
execution of background tasks. The missing disposal of the isolate
caused flaky tests on the bots recently. With this CL the isolates of
the inspector tests get disposed.
The disposal of the isolate requires the following changes: 1) Store the
isolate in a unique_ptr so that it gets disposed when the isolate-data
gets disposed. It is necessary to use the unique_ptr so that the isolate
gets disposed after other members of isolate-data get disposed. 2)
Dispose all sessions. The reason is that the sessions require the
isolate to exist when they get disposed because they own handles.
Sessions, however, are stored in a static map, whereas the isolate is
stored indirectly in a local variable of the main function. Since local
variables get disposed before the static map is cleared, we have to
clear the map before the end of the main function.
R=kozyatinskiy@chromium.org
Change-Id: Icb33184de254638b6cdfb899e940f18e6064cd69
Reviewed-on: https://chromium-review.googlesource.com/774885
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49424}
With this CL, {CreateDefaultPlatform} returns a unique_ptr to indicate
that the caller owns the returned memory. We had several memory leaks
where the memory of the DefaultPlatform did not get deallocated.
In addition, the {TracingController} of the {DefaultPlatform} also gets
received as a unique_ptr. Thereby we document that the {DefaultPlatform}
takes ownership of the {TracingController}. Note that the memory of the
{TracingController} was already owned by the {DefaultPlatform}, but it
was not documented in the interface, and it was used incorrectly in
tests.
This CL fixes the asan issues in
https://chromium-review.googlesource.com/c/v8/v8/+/753583
([platform] Implement TaskRunners in the DefaultPlatform)
R=rmcilroy@chromium.org
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: I0d1a6d3b22bb8289dc050b1977e4f58381cec675
Reviewed-on: https://chromium-review.googlesource.com/755033
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49349}
We need to throw before rethrowing, otherwise the exception does
not trigger a debugger event and is not reported if uncaught.
R=gsathya@chromium.org, jgruber@chromium.org
Bug: v8:7047
Change-Id: I7ce0253883a21d6059e4e0ed0fc56dc55a0dcba6
Reviewed-on: https://chromium-review.googlesource.com/758372
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Sathya Gunasekaran <gsathya@chromium.org>
Commit-Queue: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49237}
The sampling heap profiles can now be retrieved without stopping
the profiler.
BUG=v8:6887
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I491206d0bafd7d4e198622117c12aab0057e6bc6
Reviewed-on: https://chromium-review.googlesource.com/749700
Reviewed-by: Pavel Feldman <pfeldman@chromium.org>
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Commit-Queue: Alexei Filippov <alph@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49160}
In current implementation Object.getOwnPropertyDescriptor calls native
getter. It can produce side effects. We can avoid calling it.
DevTools frontend will show clickable dots and on click returns value.
This CL does not affect Blink and only affect several Node.js
properties, e.g. process.title.
R=yangguo@chromium.org
Bug: v8:6945
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel;master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: I5764c779ceed4d50832edf68b2b4c6ee2c2dd65c
Reviewed-on: https://chromium-review.googlesource.com/754223
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49152}
It is preparation step for step-into-worker. There are few changes:
- added breakOnAsyncCall flag for Debugger.stepInto. When flag is set
and async task is scheduled before step-into finished, we pause
execution with additional Debugger.paused event. This event contains
additional scheduledAsyncTaskId field.
- added Debugger.pauseOnAsyncTask. This method will pause execution as
soon as given async task is started.
This mechanism is replacement for Debugger.scheduleStepIntoAsync which
can not be used between multiple targets.
As result we can split async task scheduling in one target and
requesting break for this async task running in another target.
R=pfeldman@chromium.org
Bug: chromium:778796
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I77be0c880d91253d333c54a23a4c084e7b8549e9
Reviewed-on: https://chromium-review.googlesource.com/750071
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Pavel Feldman <pfeldman@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49127}
DebugBreak bytecode fetches current return value from debugger prior
dispatching original handler. So we can change its value on break.
R=leszeks@chromium.org,rmcilroy@chromium.org
Bug: chromium:656150
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel;master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: I82d0bc82ff49923a748c0084d252d0fd214a2db8
Reviewed-on: https://chromium-review.googlesource.com/731679
Reviewed-by: Pavel Feldman <pfeldman@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49122}
The status-file flags and the flags from the test case's source code
must always overwrite extra flags set by bots.
Bug: v8:6924
Cq-Include-Trybots: master.tryserver.v8:v8_linux_noi18n_rel_ng
Change-Id: I0e2aabb69da7cfb8ba6c1c79bd3851462071a6ac
Reviewed-on: https://chromium-review.googlesource.com/732656
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Sergiy Byelozyorov <sergiyb@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49001}
Currently we incorrectly show global object as arrow function receiver.
With this CL:
- if this is used inside of function we show correct this value,
- if this is unused and V8 optimizes it out - we show undefined.
Second is known issue which we should address separately.
R=dgozman@chromium.org,yangguo@chromium.org
Bug: chromium:552753
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Iac88a07fe622eb9b2f8af7ecbc4a32a56c8cdfaa
Reviewed-on: https://chromium-review.googlesource.com/723840
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48839}
Instead of re-iterating over the heap all the time, use the
list of feedback vectors on the isolate. This also avoids GC of vectors.
Bug: v8:5935
Change-Id: I0bb96fcf2b0feb9856e9806f812188de1fc7b37e
Reviewed-on: https://chromium-review.googlesource.com/668396
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Franziska Hinkelmann <franzih@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48643}
This is a reland of 61292f0b60
Original change's description:
> [inspector] breakpoint after last break position should not jump to first line
>
> R=jgruber@chromium.org
>
> Bug: chromium:730177
> Change-Id: I0f3666a333604cb80bb51410c5edf2aceb0c6ef5
> Reviewed-on: https://chromium-review.googlesource.com/717717
> Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
> Reviewed-by: Jakob Gruber <jgruber@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#48556}
TBR=jgruber@chromium.org
Bug: chromium:730177
Change-Id: I564cc5d7778f9d79780eae9dbe2d9aafaad4f466
Reviewed-on: https://chromium-review.googlesource.com/721468
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48615}
Use case: anonymous script with sourceMappingUrl. User can set
breakpoint in source with sourceUrl from sourceMap, we persist this
breakpoint in DevTools and on page reload breakpoint should be restored
correctly.
Debugger.setBreakpointByUrl method provides capabilities to set
provisional breakpoints and looks like best candidate for new "scriptHash"
argument.
I considered other options such as replacing scriptId with something
more persistent like "script-hash:script-with-this-hash-number" but it
looks more complicated and doesn't provide clear advantages.
One pager: http://bit.ly/2wkRHntR=pfeldman@chromium.org
Bug: chromium:459499
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I0e2833fceffe6b04afac01d1a4522d6874b6067a
Reviewed-on: https://chromium-review.googlesource.com/683597
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48357}
Use the (D)CHECK_{EQ,NE,GT,...} macros instead of (D)CHECK with an
embedded comparison. This gives better error messages and also does the
right comparison for signed/unsigned mismatches.
This will allow us to reenable the readability/check cpplint check.
R=yangguo@chromium.org
Bug: v8:6837
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I88e5afea1ad0fdf23a81b380e64ff356bbc20112
Reviewed-on: https://chromium-review.googlesource.com/681374
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48138}
Before we used to require compiled debugger script to report Scopes.
After migration inspection to brand-new native API we can report
Scopes all the time and remove this hidden dependency.
R=dgozman@chromium.org
Bug: none
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I3530bc7ead691a51073e384aea4a4ef428dc94da
Reviewed-on: https://chromium-review.googlesource.com/662097
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47982}
JavaScript is a dynamically typed language. But most code is
written with fixed types in mind. When debugging JavaScript,
it is helpful to know the types of variables and parameters
at runtime. It is often hard to infer types for complex code.
Type profiling provides this information at runtime.
Node.js uses the inspector protocol. This CL allows Node.js users
to access and analyse type profile for via Node modules or the
in-procress api. Type Profile helps developers to analyze
their code for correctness and performance.
Design doc: https://docs.google.com/a/google.com/document/d/1O1uepXZXBI6IwiawTrYC3ohhiNgzkyTdjn3R8ysbYgk/edit?usp=sharing
Add `takeTypeProfile` to the inspector protocol. It returns a list
of TypeProfileForScripts, which in turn contains the type profile for
each function. We can use TypeProfile data to annotate JavaScript code.
Sample script with data from TypeProfile:
function f(/*Object, number, undefined*/a,
/*Array, number, null*/b,
/*boolean, Object, symbol*/c) {
return 'bye';
/*string*/};
f({}, [], true);
f(3, 2.3, {a: 42});
f(undefined, null, Symbol('hello'));/*string*/
Bug: v8:5933
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel;master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: I626bfb886b752f90b9c86cc6953601558b18b60d
Reviewed-on: https://chromium-review.googlesource.com/508588
Commit-Queue: Franziska Hinkelmann <franzih@chromium.org>
Reviewed-by: Pavel Feldman <pfeldman@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47920}
Runtime.CallFrame has url already. It allows to show stack traces on pause
without tacking all parsed scripts.
R=alph@chromium.org,pfeldman@chromium.org
Bug: chromium:762982
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Ic4f096ade1cb6c9de42fec77280dcc3007c6a5cf
Reviewed-on: https://chromium-review.googlesource.com/648068
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Pavel Feldman <pfeldman@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47895}
To enable executing code in a context of a particular time or date (e.g. when
codepath depends on whether it's say evening or New Year) there is a need for
a way to provide it bypassing actual system time.
Bug: chromium:751993
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: Iee35d97b74345f63fff814a65a6f134d7c970341
Reviewed-on: https://chromium-review.googlesource.com/598666
Commit-Queue: Sergei Datsenko <dats@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47700}
As part of J2V8 development (https://github.com/eclipsesource/J2V8),
we realized that we had a subtle bug in how Isolate scope was created
and it's lifetime managed, see:
https://github.com/eclipsesource/J2V8/issues/313.
Mentioned above bug was fixed, however, what we also noticed is that
V8 API has been constantly and slowly moving to such an API, in which
one has to pass Isolate explicitly to methods and/or constructors. We
found two more places that might have been overlooked. This contribution
adds passing of Isolate pointer explicitly to constructors of
String::Utf8Value and String::Value classes.
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng;master.tryserver.v8:v8_linux_noi18n_rel_ng
Change-Id: I61984285f152aba5ca922100cf3df913a9cb2cea
Reviewed-on: https://chromium-review.googlesource.com/593309
Commit-Queue: Adam Klein <adamk@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47656}
This is so that precise coverage starts with a clean slate.
The old behavior can be emulated by calling getBestEffortCoverage
before starting precise coverage.
R=jgruber@chromium.org
Bug: chromium:757998
Change-Id: Ib3ee2316966f676456198159bdcf8ba8b9d3896f
Reviewed-on: https://chromium-review.googlesource.com/635084
Commit-Queue: Yang Guo <yangguo@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47629}
Currently, injected script source adds natural object properties before
internal properties. This can result in important ones such as
"[[PrimitiveValue]]" being left out. This CL
- makes sure internal properties are always added to preview
- removes unused "[[Iterator*]]" properties from preview
- boxed strings (e.g. new String("foo")) will not send unnecessary
properties 0:"f", 1:"o", 2:"o" if the [[PrimitiveValue]] is sent.
Bug: chromium:567265
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Icd5c7410351f371055277ce471226cc6fb5a861f
Reviewed-on: https://chromium-review.googlesource.com/634584
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Commit-Queue: Erik Luo <luoe@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47622}
