Introduce a new JSGlobalSpecialization advanced reducer that runs
during the initial inlining and context specialization, and specializes
the graph to the globals of the native context. Currently we assume
that we do not inline cross native context, but long-term we will grab
the global object from the JSLoadGlobal/JSStoreGlobal feedback (with the
new global load/store ICs that are currently in the workings), and then
this whole specialization will be fully compositional even across
cross-context inlining.
Note that we cannot really handle most of the stores to global object
property cells because TurboFan doesn't have a mechanism to enforce
certain representations. Also note that we cannot yet fully benefit
from the type feedback collected on the global object property cells,
because the type system cannot deal with maps in a reasonable way.
CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux_nosnap_rel
R=jarin@chromium.org
BUG=v8:4470
LOG=n
Review URL: https://codereview.chromium.org/1387393002
Cr-Commit-Position: refs/heads/master@{#31139}
Adds an ignition variant to the test runner and adds support to test262 for
filtering such that only test scripts (not the test harness) get run by
the interpreter.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1379093002
Cr-Commit-Position: refs/heads/master@{#31123}
This adds the unittests to the "default" test set. Now that
the "default" and the DEFAULT_TESTS (i.e. runner with
no arguments) are the same, removed DEFAULT_TESTS and use
TEST_MAP["default"] instead.
On the bots, where unittests and default were run in
separation before, the explicit unittests step should now
be skipped.
This is necessary for swarming, as the unittests step is
too small to justify its own swarming job.
BUG=chromium:535160
LOG=n
Review URL: https://codereview.chromium.org/1374733006
Cr-Commit-Position: refs/heads/master@{#31122}
This removes the lookup-inl.h header file, which actually would break
compilation if included more than once in the codebase. It only holds
methods used solely in the lookup.cc compilation unit.
R=verwaest@chromium.org
Review URL: https://codereview.chromium.org/1375843004
Cr-Commit-Position: refs/heads/master@{#31104}
Previous to this patch, both the lithium and TurboFan register
allocators tracked allocated registers by "indices", rather than
the register codes used elsewhere in the runtime. This patch
ensures that codes are used everywhere, and in the process cleans
up a bunch of redundant code and adds more structure to how the
set of allocatable registers is defined.
Some highlights of changes:
* TurboFan's RegisterConfiguration class moved to V8's top level
so that it can be shared with Crankshaft.
* Various "ToAllocationIndex" and related methods removed.
* Code that can be easily shared between Register classes on
different platforms is now shared.
* The list of allocatable registers on each platform is declared
as a list rather than implicitly via the register index <->
code mapping.
Committed: https://crrev.com/80bc6f6e11f79524e3f1ad05579583adfd5f18b2
Cr-Commit-Position: refs/heads/master@{#30913}
Committed: https://crrev.com/7b7a8205d9a00c678fb7a6e032a55fecbc1509cf
Cr-Commit-Position: refs/heads/master@{#31075}
Review URL: https://codereview.chromium.org/1287383003
Cr-Commit-Position: refs/heads/master@{#31087}
Reason for revert:
Prime suspect in breakage of V8 Linux -- no snap
Original issue's description:
> [swarming] Isolate v8 testing.
>
> Add gyp support and isolates for default test suites.
> Add two default isolates, one (default) for using the
> test suite collection we call "default" on the bots. One
> (developer_default) for also supporting the way developers
> call the driver (i.e. without argument, which includes
> the unittests).
>
> BUG=chromium:535160
> LOG=n
>
> Committed: https://crrev.com/9bd83f58f29ab0c7c5b71b00bcb1df3a9e641f05
> Cr-Commit-Position: refs/heads/master@{#31081}
TBR=tandrii@chromium.org,jochen@chromium.org,maruel@chromium.org,machenbach@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:535160
Review URL: https://codereview.chromium.org/1370993008
Cr-Commit-Position: refs/heads/master@{#31084}
Reason for revert:
Failures on MIPS
Original issue's description:
> Remove register index/code indirection
>
> Previous to this patch, both the lithium and TurboFan register
> allocators tracked allocated registers by "indices", rather than
> the register codes used elsewhere in the runtime. This patch
> ensures that codes are used everywhere, and in the process cleans
> up a bunch of redundant code and adds more structure to how the
> set of allocatable registers is defined.
>
> Some highlights of changes:
>
> * TurboFan's RegisterConfiguration class moved to V8's top level
> so that it can be shared with Crankshaft.
> * Various "ToAllocationIndex" and related methods removed.
> * Code that can be easily shared between Register classes on
> different platforms is now shared.
> * The list of allocatable registers on each platform is declared
> as a list rather than implicitly via the register index <->
> code mapping.
>
> Committed: https://crrev.com/80bc6f6e11f79524e3f1ad05579583adfd5f18b2
> Cr-Commit-Position: refs/heads/master@{#30913}
>
> Committed: https://crrev.com/7b7a8205d9a00c678fb7a6e032a55fecbc1509cf
> Cr-Commit-Position: refs/heads/master@{#31075}
TBR=akos.palfi@imgtec.com,bmeurer@chromium.org,jarin@chromium.org,paul.lind@imgtec.com,titzer@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1380863004
Cr-Commit-Position: refs/heads/master@{#31083}
Add gyp support and isolates for default test suites.
Add two default isolates, one (default) for using the
test suite collection we call "default" on the bots. One
(developer_default) for also supporting the way developers
call the driver (i.e. without argument, which includes
the unittests).
BUG=chromium:535160
LOG=n
Review URL: https://codereview.chromium.org/1380593002
Cr-Commit-Position: refs/heads/master@{#31081}
Previous to this patch, both the lithium and TurboFan register
allocators tracked allocated registers by "indices", rather than
the register codes used elsewhere in the runtime. This patch
ensures that codes are used everywhere, and in the process cleans
up a bunch of redundant code and adds more structure to how the
set of allocatable registers is defined.
Some highlights of changes:
* TurboFan's RegisterConfiguration class moved to V8's top level
so that it can be shared with Crankshaft.
* Various "ToAllocationIndex" and related methods removed.
* Code that can be easily shared between Register classes on
different platforms is now shared.
* The list of allocatable registers on each platform is declared
as a list rather than implicitly via the register index <->
code mapping.
Committed: https://crrev.com/80bc6f6e11f79524e3f1ad05579583adfd5f18b2
Cr-Commit-Position: refs/heads/master@{#30913}
Review URL: https://codereview.chromium.org/1287383003
Cr-Commit-Position: refs/heads/master@{#31075}
Swarming won't support an incremental data file. By just
sorting the lowest hanging fruits to the beginning we
already get a big bang for the buck (>80% of the improvement
we get otherwise).
This will require semi-regular manual updates of the
slowest tests.
BUG=chromium:535160
LOG=n
Review URL: https://codereview.chromium.org/1385443002
Cr-Commit-Position: refs/heads/master@{#31061}
Adds support for short operands, starting with kIdx16. Introduces
BytecodeTraits to enable compile time determination of various traits for a
bytecode, such as size, operands, etc. Reworks BytecodeIterator,
BytecodeArrayBuilder and Bytecodes::Decode to support 16 bit operands. Adds
support to Interpreter to load 16 bit operands.
Also fixes a bug with ToBoolean where it wouldn't get emitted at the start
of a block, and added a test.
BytecodeTraits template magic inspired by oth@chromium.org.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1370893002
Cr-Commit-Position: refs/heads/master@{#31058}
Improve bytecode generation for if when there's no else clause.
Display target addresses for jump instructions in
Bytecode::Disassemble().
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1373903005
Cr-Commit-Position: refs/heads/master@{#31052}
This is a simplified version of chromium's isolate driver:
- 'prepare' will create a *.isolate.gen.json with the
arguments to be used later.
- other modes will just be passed through to the isolate
script.
BUG=chromium:535160
LOG=n
NOTRY=true
Review URL: https://codereview.chromium.org/1378133005
Cr-Commit-Position: refs/heads/master@{#31046}
With this change mergeinfo.py gets more useful. There is
a distinction between merges and follow-up CLs/ports/reverts.
Also the information is show if the commit is already
rolled/an lkgr/deployed to Canary channel.
Additionally some formatting errors were resolved and
the already existing git wrapper used.
LOG=N
R=machenbach@chromium.org
NOTRY=true
Review URL: https://codereview.chromium.org/1341303002
Cr-Commit-Position: refs/heads/master@{#31043}
This enables linter checking for "readability/namespace" violations
during presubmit and instead marks the few known exceptions that we
allow explicitly.
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1371083003
Cr-Commit-Position: refs/heads/master@{#31019}
[run-tests.py]
- adding more detailed information about the flags
- show more detailed error message on failing Popen commands
BUG=
Review URL: https://codereview.chromium.org/1369343002
Cr-Commit-Position: refs/heads/master@{#30997}
The comparison operators and ToBoolean are implemented by calling into
the runtime. There are new runtime methods are prefixed with Interpreter
to make use case clear.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1369123002
Cr-Commit-Position: refs/heads/master@{#30983}
This enables linter checking for "runtime/threadsafe_fn" violations
during presubmit and instead marks the few known exceptions that we
allow explicitly.
R=jochen@chromium.org
Review URL: https://codereview.chromium.org/1369673003
Cr-Commit-Position: refs/heads/master@{#30933}
mdb_v8, a post-mortem debugger for Node.js, now uses JSArrayBuffer's
backing_store property and JSArrayBufferView's byte_offset property to
get access to the content of Buffer instances in node (which are
Uint8Array instances). This change adds post-mortem metadata for these
two properties.
This change also fixes a typo in
inobject_properties_of_constructor_function_index_offset that was added
to gen-postmortem-metadata in a previous change. It should be named
inobject_properties_or_constructor_function_index instead.
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1363403003
Cr-Commit-Position: refs/heads/master@{#30926}
Reason for revert:
Failures on greedy RegAlloc, Fuzzer
Original issue's description:
> Remove register index/code indirection
>
> Previous to this patch, both the lithium and TurboFan register
> allocators tracked allocated registers by "indices", rather than
> the register codes used elsewhere in the runtime. This patch
> ensures that codes are used everywhere, and in the process cleans
> up a bunch of redundant code and adds more structure to how the
> set of allocatable registers is defined.
>
> Some highlights of changes:
>
> * TurboFan's RegisterConfiguration class moved to V8's top level
> so that it can be shared with Crankshaft.
> * Various "ToAllocationIndex" and related methods removed.
> * Code that can be easily shared between Register classes on
> different platforms is now shared.
> * The list of allocatable registers on each platform is declared
> as a list rather than implicitly via the register index <->
> code mapping.
>
> Committed: https://crrev.com/80bc6f6e11f79524e3f1ad05579583adfd5f18b2
> Cr-Commit-Position: refs/heads/master@{#30913}
TBR=akos.palfi@imgtec.com,bmeurer@chromium.org,jarin@chromium.org,paul.lind@imgtec.com,titzer@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1365073002
Cr-Commit-Position: refs/heads/master@{#30914}
Previous to this patch, both the lithium and TurboFan register
allocators tracked allocated registers by "indices", rather than
the register codes used elsewhere in the runtime. This patch
ensures that codes are used everywhere, and in the process cleans
up a bunch of redundant code and adds more structure to how the
set of allocatable registers is defined.
Some highlights of changes:
* TurboFan's RegisterConfiguration class moved to V8's top level
so that it can be shared with Crankshaft.
* Various "ToAllocationIndex" and related methods removed.
* Code that can be easily shared between Register classes on
different platforms is now shared.
* The list of allocatable registers on each platform is declared
as a list rather than implicitly via the register index <->
code mapping.
Review URL: https://codereview.chromium.org/1287383003
Cr-Commit-Position: refs/heads/master@{#30913}
We not keep track of the histogram as we process values and do not wait until
printing the histogram. Furthermore processing the histogram is not O(n) for n
values.
BUG=
Review URL: https://codereview.chromium.org/1364733002
Cr-Commit-Position: refs/heads/master@{#30891}
mdb_v8, a post-mortem debugging tool for Node.js, allows users to
inspect ScopeInfo structures in order to get more information about
closures.
Currently, it hardcodes the metadata it uses to find this information.
This change allows it to get this metadata from the node binary itself,
and thus to adapt to future changes made to the layout of the ScopeInfo
data structure.
BUG=
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1350843003
Cr-Commit-Position: refs/heads/master@{#30843}
Since https://codereview.chromium.org/272163002, BitField3 is a raw
uint32 field, and not a SMI anymore.
Update tools/gen-postmortem-metadata.py so that post-mortem tools can
work with versions of V8 that shipped after that change.
This change was merged in github.com/joyent/node right before node
v0.12.0 was released.
R=danno@chromium.org
TEST=mdb_v8, a post-mortem debugging tool running on SmartOS, has been
using this change since Node.js v0.12.0 was released
BUG=
Review URL: https://codereview.chromium.org/1296743003
Cr-Commit-Position: refs/heads/master@{#30839}
It's been enabled since M45, which is now well into its stable period,
with no problems reported.
Review URL: https://codereview.chromium.org/1356793002
Cr-Commit-Position: refs/heads/master@{#30835}
Now run-tests.py understands "suite/foo/bar" with forward slashes for
command-line test selection on all test suites on all platforms.
Previously, file-based suites like mjsunit also accepted "mjsunit/foo\bar";
that behavior is sacrificed here in favor of unification. For the cctest
suite, OTOH, it wasn't possible on Windows to select specific tests at all.
Original review: https://codereview.chromium.org/1348653003/
This reverts commit 5f44a91059.
NOTRY=true
Review URL: https://codereview.chromium.org/1356613002
Cr-Commit-Position: refs/heads/master@{#30798}
Reason for revert:
mozilla tests are failing on Windows
Original issue's description:
> [test] Fix cctest path separators on Windows
>
> Now run-tests.py understands "suite/foo/bar" with forward slashes for
> command-line test selection on all test suites on all platforms.
>
> Previously, file-based suites like mjsunit also accepted "mjsunit/foo\bar";
> that behavior is sacrificed here in favor of unification. For the cctest
> suite, OTOH, it wasn't possible on Windows to select specific tests at all.
>
> Committed: https://crrev.com/b36cfdb39ae648b49a1396c4f669df9b1f57996c
> Cr-Commit-Position: refs/heads/master@{#30794}
TBR=machenbach@google.com,machenbach@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1349163002
Cr-Commit-Position: refs/heads/master@{#30795}
Now run-tests.py understands "suite/foo/bar" with forward slashes for
command-line test selection on all test suites on all platforms.
Previously, file-based suites like mjsunit also accepted "mjsunit/foo\bar";
that behavior is sacrificed here in favor of unification. For the cctest
suite, OTOH, it wasn't possible on Windows to select specific tests at all.
Review URL: https://codereview.chromium.org/1348653003
Cr-Commit-Position: refs/heads/master@{#30794}
Enhance the perf runner to run with the profiler and print the summary for each d8 run. This automates running the profiler with multiple benchmarks.
BUG=None
LOG=N
TBR=machenbach@chromium.org
Review URL: https://codereview.chromium.org/1327033003
Cr-Commit-Position: refs/heads/master@{#30720}
This moves scavenging functionality into a separate component so that
neither the scavenger nor objects-visiting need to be exposed outside
the heap.
R=hpayer@chromium.org,mlippautz@chromium.org
Review URL: https://codereview.chromium.org/1323993004
Cr-Commit-Position: refs/heads/master@{#30712}
Replace the ADD, SUB, etc. builtins with proper runtime implementations,
and expose them as runtime calls that can be used by the code stubs and
the interpreter (for now).
Also remove all the support runtime functions for ADD, SUB and friends,
namely %NumberAdd, %NumberSub, and so on.
R=mstarzinger@chromium.org
CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux_layout_dbg,v8_linux_nosnap_dbg
Review URL: https://codereview.chromium.org/1333843002
Cr-Commit-Position: refs/heads/master@{#30680}
This moves incremental marking steps from gc-idle-time-handler and heap to the new incremental marking task.
BUG=chromium:490559
LOG=NO
Review URL: https://codereview.chromium.org/1265423002
Cr-Commit-Position: refs/heads/master@{#30641}
- Modify js2c to accept --js and --nojs,
- modify mksnapshot to accept --startup_src
(instead of a positional parameter, so that it can be omitted),
- modify v8.gyp to use the above so that no target has multiple
output dependencies, and
- update GN to use the switches above.
(I have not succeeded in fixing the GYP->make translator to properly map
multi-output rules, so that they work as expected in all edge cases.
This CL signals defeat on that front, and instead I rewrite the GYP
file to avoid that situation in the first place.)
R=jochen@chromium.org
BUG=v8:4382
LOG=N
Review URL: https://codereview.chromium.org/1310273009
Cr-Commit-Position: refs/heads/master@{#30640}
This enables the general linter checking for "build/c++11" violations
during presubmit and instead marks the few known exceptions that we
allow explicitly.
R=jochen@chromium.org
Review URL: https://codereview.chromium.org/1317463007
Cr-Commit-Position: refs/heads/master@{#30621}
This information can be used on the buildbot side to only
rebuild the failing target for bisection.
BUG=chromium:511215
LOG=n
NOTRY=true
Review URL: https://codereview.chromium.org/1313353006
Cr-Commit-Position: refs/heads/master@{#30617}
{AtomicValue}: A simple integer value that can be atomically
read/set/incremented.
{AtomicEnumSet}: Similar to EnumSet this set basically represents an atomic
bitfield based on enums. Atomic operations guarantee that setting one bit does
not race with setting other bits.
{AtomicEnumFlag}: A flag that is based on an enum that can be read and
(attempted to be) changed atomically.
BUG=chromium:524425
LOG=N
Review URL: https://codereview.chromium.org/1310993004
Cr-Commit-Position: refs/heads/master@{#30560}
Note that this is only pulling out the bookkeeping side of things, the
marking visitor that actually records the statistics should also move
into the ObjectStats class. That will be done as a follow-up.
R=mlippautz@chromium.org
Review URL: https://codereview.chromium.org/1326793002
Cr-Commit-Position: refs/heads/master@{#30547}
Walk asm.js module ASTs, attach concrete type information
in preparation for generating a WASM module.
cctest test coverage (mjsunit coming in later CL).
Expressions, function tables, and foreign functions have coverage.
Statement coverage to be expanded in a later CL.
BUG= https://code.google.com/p/v8/issues/detail?id=4203
TEST=test-asm-validator
R=rossberg@chromium.org,titzer@chromium.org
LOG=N
Review URL: https://codereview.chromium.org/1322773002
Cr-Commit-Position: refs/heads/master@{#30520}
This turns the absolute list of linter rules within the presubmit.py
wrapper into a list relative to the default of the cpplint.py script.
This has the advantage that new rules are picked up when the script is
updated and that allowed violations are visible from the list.
R=machenbach@chromium.org
Review URL: https://codereview.chromium.org/1325833005
Cr-Commit-Position: refs/heads/master@{#30513}
This CL us a pure refactoring that makes an empty compilation unit
including just "isolate.h" or "contexts.h" but not "objects-inl.h"
compile without warnings or errors. This is needed to further reduce
the header dependency tangle.
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1322883002
Cr-Commit-Position: refs/heads/master@{#30500}
This data structure uses the public heap API only and is not specific
to any heap internals. It should be usable throughout V8 and inclusion
of the header file should not be restricted.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1320503004
Cr-Commit-Position: refs/heads/master@{#30443}
This change encompasses what is necessary to enable stack checks in loops without suffering large regressions.
Primarily, it consists of a new mechanism for dealing with deferred blocks by "splintering", rather than splitting, inside deferred blocks.
My initial change was splitting along deferred block boundaries, but the regression introduced by stackchecks wasn't resolved conclusively. After investigation, it appears that just splitting ranges along cold block boundaries leads to a greater opportunity for moves on the hot path, hence the suboptimal outcome.
The alternative "splinters" ranges rather than splitting them. While splitting creates 2 ranges and links them (parent-child), in contrast, splintering creates a new independent range with no parent-child relation to the original. The original range appears as if it has a liveness hole in the place of the splintered one. All thus obtained ranges are then register allocated with no change to the register allocator.
The splinters (cold blocks) do not conflict with the hot path ranges, by construction. The hot path ones have less pressure to split, because we remove a source of conflicts. After allocation, we merge the splinters back to their original ranges and continue the pipeline. We leverage the previous changes made for deferred blocks (determining where to spill, for example).
Review URL: https://codereview.chromium.org/1305393003
Cr-Commit-Position: refs/heads/master@{#30357}
Adding an AstExpressionVisitor to touch each expression node in
an AST.
Adding TypingReseter to clear the slate after a failed asm.js
validation that has set partial typing information.
Adding a ExpressionTypeCollector to walk the expressions
in an AST and emit them as a string for testing.
Adding tests of the above.
LOG=N
BUG= https://code.google.com/p/v8/issues/detail?id=4203
TEST=test-typing-reset,test-ast-expression-visitor
R=rossberg@chromium.org,titzer@chromium.org
Review URL: https://codereview.chromium.org/1288773007
Cr-Commit-Position: refs/heads/master@{#30336}
This make inclusion of unicode-inl.h in object.h absolete. Now most
compilation units don't require that header. It also breaks a cycle
within declarations of the scanner.h header.
This tries to remove includes of "-inl.h" headers from normal ".h"
headers, thereby reducing the chance of any cyclic dependencies and
decreasing the average size of our compilation units.
Note that this change still leaves 3 violations of that rule in the
code, checked with the "tools/check-inline-includes.sh" tool.
R=yangguo@chromium.org
Review URL: https://codereview.chromium.org/1287893006
Cr-Commit-Position: refs/heads/master@{#30268}
Embedders would use these for features which must be able to be turned
off at runtime, despite being compiled into V8. They can be turned on
and off by the embedder using the --experimental_extras flag, e.g. via
v8::SetFlagsFromString.
R=yangguo@chromium.org, mlippautz@chromium.org, hpayer@chromium.org
BUG=chromium:507137
LOG=Y
Review URL: https://codereview.chromium.org/1284413002
Cr-Commit-Position: refs/heads/master@{#30260}
Previously, it was not possible to specify StackSlotOperands for all
slots in both the caller and callee stacks. Specifically, the region
of the callee's stack including the saved return address, frame
pointer, function pointer and context pointer could not be addressed
by the register allocator/gap resolver.
In preparation for better tail call support, which will use the gap
resolver to reconcile outgoing parameters, this change makes it
possible to address all slots on the stack, because slots in the
previously inaccessible dead zone may become parameter slots for
outgoing tail calls. All caller stack slots are accessible as they
were before, with slot -1 corresponding to the last stack
parameter. Stack slot indices >= 0 access the callee stack, with slot
0 corresponding to the callee's saved return address, 1 corresponding
to the saved frame pointer, 2 corresponding to the current function
context, 3 corresponding to the frame marker/JSFunction, and slots 4
and above corresponding to spill slots.
The following changes were specifically needed:
* Frame has been changed to explicitly manage three areas of the
callee frame, the fixed header, the spill slot area, and the
callee-saved register area.
* Conversions from stack slot indices to fp offsets all now go through
a common bottleneck: OptimizedFrame::StackSlotOffsetRelativeToFp
* The generation of deoptimization translation tables has been changed
to support the new stack slot indexing scheme. Crankshaft, which
doesn't support the new slot numbering in its register allocator,
must adapt the indexes when creating translation tables.
* Callee-saved parameters are now kept below spill slots, not above,
to support saving only the optimal set of used registers, which is
only known after register allocation is finished and spill slots
have been allocated.
Review URL: https://codereview.chromium.org/1261923007
Cr-Commit-Position: refs/heads/master@{#30224}
Bytecode generator for local assignment and basic binary operations.
Command-line flag for printing bytecodes.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1294543002
Cr-Commit-Position: refs/heads/master@{#30221}
- Make the API look like v8::V8::InitializeICU.
(That is: A static method call, not an object to be created on the stack.)
- Fix path separator on Windows, by calling base::OS::isPathSeparator.
- Move into API, so that it can be called by hello-world & friends.
- Actually call it from hello-world and friends.
R=jochen@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1292053002
Cr-Commit-Position: refs/heads/master@{#30174}
This tries to remove includes of "-inl.h" headers from normal ".h"
headers, thereby reducing the chance of any cyclic dependencies and
decreasing the average size of our compilation units.
Note that this change still leaves 7 violations of that rule in the
code. However there now is the "tools/check-inline-includes.sh" tool
detecting such violations.
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1283033003
Cr-Commit-Position: refs/heads/master@{#30125}
The previous approach to this (in 1b1de2d22) did not work well with
bots that intentionally run no tests. But I think this warning message
is still useful for developers.
Review URL: https://codereview.chromium.org/1281313004
Cr-Commit-Position: refs/heads/master@{#30116}
Reason for revert:
Some bots that don't run tests (by design) don't return the test results json anymore which makes the infrastructure side fail now.
Original issue's description:
> Make run-tests.py warn when it's not testing anything
>
> I've often been confused by an "all passed" run of the test script
> when it turned out that either all the tests I cared about were skipped
> or, more likely, I mistyped the name(s) of the tests I wanted to run.
> This patch aims to fix that (and gives a useful diagnostic for the
> "all matched tests were skipped" case).
>
> R=machenbach@chromium.org
> NOTRY=true
>
> Committed: https://crrev.com/1b1de2d221a0ed23e529e91bf9fa3dc287acb2ca
> Cr-Commit-Position: refs/heads/master@{#30095}
TBR=jkummerow@chromium.org,adamk@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1283593005
Cr-Commit-Position: refs/heads/master@{#30097}
I've often been confused by an "all passed" run of the test script
when it turned out that either all the tests I cared about were skipped
or, more likely, I mistyped the name(s) of the tests I wanted to run.
This patch aims to fix that (and gives a useful diagnostic for the
"all matched tests were skipped" case).
R=machenbach@chromium.org
NOTRY=true
Review URL: https://codereview.chromium.org/1283513003
Cr-Commit-Position: refs/heads/master@{#30095}
Use the same path separator for test cases on the cmd-line
on all platforms as in testcase.GetLabel, which is used to
report failures.
BUG=chromium:511215
LOG=n
NOTRY=true
Review URL: https://codereview.chromium.org/1281453003
Cr-Commit-Position: refs/heads/master@{#30045}
This is only an estimate since it counts objects that could be shared,
for example strings, cow arrays, heap numbers, etc.
It however ignores objects that could be shared, but may only be used
by the context to be measured, for example shared function infos,
script objects, scope infos, etc.
R=jochen@chromium.org
Review URL: https://codereview.chromium.org/1268333004
Cr-Commit-Position: refs/heads/master@{#30029}
To avoid tanking context startup performance, only the actual installation of the
JS-exposed API is flag-guarded. The remainder of the implementation still
resides in the snapshot.
Review URL: https://codereview.chromium.org/1257063003
Cr-Commit-Position: refs/heads/master@{#30017}
Added a separate flag for this, since we intend to enable it for the linear allocator as well. Currently, the option is "on" for greedy, as a point in time to enable its testing (through the greedy allocator bots).
BUG=
Review URL: https://codereview.chromium.org/1256313003
Cr-Commit-Position: refs/heads/master@{#30005}
The BytecodeArrayBuilder has responsibility for emitting the BytecodeArray. It will be used by the AST walker.
Bytecode now uses an accumulator plus registers rather being pure register based.
Update BytecodeArray::Disassemble to print operand information.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1266713004
Cr-Commit-Position: refs/heads/master@{#29970}
This is the first step in cutting the Gordian linkage/linkage-impl knot.
This basically changes the axis along which we organize call descriptor
building logic from having platform-specific files dedicated to all call
descriptor types to having call-descriptor-type-specific files that have
The next step is to factor the JS, code stub, and runtime call descriptors
similarly, dumping them into:
compiler/js-linkage.cc
compiler/runtime-linkage.cc
compiler/code-stub-linkage.cc
or, alternatively, all of them just into compiler/js-linkage.cc.
This also anticipates a wasm-linkage.cc file in the future.
R=bmeurer@chromium.org,danno@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1266603002
Cr-Commit-Position: refs/heads/master@{#29931}
This allows variants to be named on test failures (follow
up) and then to be used in the test runner for a repro.
This also speeds up variant iteration for test262 and fixes
a bug with variants for benchmarks.
BUG=chromium:511215
NOTREECHECKS=true
LOG=n
Review URL: https://codereview.chromium.org/1245623005
Cr-Commit-Position: refs/heads/master@{#29899}
Adds basic support for generation of interpreter bytecode handler code
snippets. The InterpreterAssembler class exposes a set of low level,
interpreter specific operations which can be used to build a Turbofan
graph. The Interpreter class generates a bytecode handler snippet for
each bytecode by assembling operations using an InterpreterAssembler.
Currently only two simple bytecodes are supported: LoadLiteral0 and Return.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1239793002
Cr-Commit-Position: refs/heads/master@{#29814}
There are many test names in the v8 code base that prefix
others, which makes it hard to only run those tests.
BUG=chromium:511215
LOG=n
NOTRY=true
Review URL: https://codereview.chromium.org/1251363002
Cr-Commit-Position: refs/heads/master@{#29809}
Using the GraphBuilder base class forces each node creation to go
through a virtual function dispatch just for the sake of saving the
duplication of the NewNode helper methods. In total that added up to
saving minus (sic!) six lines of code.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1252093002
Cr-Commit-Position: refs/heads/master@{#29799}
The layout of fixed typed array base is then capable of handling
external typed arrays as well. In a follow-up CL, I'll delete external
typed arrays, and use fixed typed array base instead
BUG=v8:3996
R=jarin@chromium.org,mstarzinger@chromium.org
LOG=n
Review URL: https://codereview.chromium.org/1248483007
Cr-Commit-Position: refs/heads/master@{#29786}
The gdb-v8-support.py script uses the "re" module to match regular expression,
but it does not import it, resulting in an error when loading the script from
GDB. This patch adds the missing import.
BUG=
Review URL: https://codereview.chromium.org/1245713002
Cr-Commit-Position: refs/heads/master@{#29770}
In many cases, the context that TurboFan's ASTGraphBuilder or subsequent
reduction operations attaches to nodes does not need to be that exact
context, but rather only needs to be one with the same native context,
because it is used internally only to fetch the native context, e.g. for
creating and throwing exceptions.
This reducer recognizes common cases where the context that is specified
for a node can be relaxed to a canonical, less specific one. This
relaxed context can either be the enclosing function's context or a specific
Module or Script context that is explicitly created within the function.
This optimization is especially important for TurboFan-generated code stubs
which use context specialization and inlining to generate optimal code.
Without context relaxation, many extraneous moves are generated to pass
exactly the right context to internal functions like ToNumber and
AllocateHeapNumber, which only need the native context. By turning context
relaxation on, these moves disappear because all these common internal
context uses are unified to the context passed into the stub function, which
is typically already in the correct context register and remains there for
short stubs. It also eliminates the explicit use of a specialized context
constant in the code stub in these cases, which could cause memory leaks.
Review URL: https://codereview.chromium.org/1244583003
Cr-Commit-Position: refs/heads/master@{#29763}
This CL exposes the constructor function, defines type related
information, and implements value type semantics.
It also refactors test/mjsunit/samevalue.js to test SameValue and SameValueZero.
TEST=test/mjsunit/harmony/simd.js, test/cctest/test-simd.cc
LOG=Y
BUG=v8:4124
Committed: https://crrev.com/e5ed3bee99807c502fa7d7a367ec401e16d3f773
Cr-Commit-Position: refs/heads/master@{#29689}
Review URL: https://codereview.chromium.org/1219943002
Cr-Commit-Position: refs/heads/master@{#29712}
This CL exposes the constructor function, defines type related
information, and implements value type semantics.
It also refactors test/mjsunit/samevalue.js to test SameValue and SameValueZero.
TEST=test/mjsunit/harmony/simd.js, test/cctest/test-simd.cc
LOG=Y
BUG=v8:4124
Review URL: https://codereview.chromium.org/1219943002
Cr-Commit-Position: refs/heads/master@{#29689}
This also adds a script to the tools directory that allows to grep for
unused bailout reasons. For now the script needs to be run manually.
R=mvstanton@chromium.org
Review URL: https://codereview.chromium.org/1237623003
Cr-Commit-Position: refs/heads/master@{#29609}
Until now, TF-generated code stubs piggy-backed off of the builtin
context. Since generation of code stubs is lazy, stubs generated at
different times in different native contexts would contain embedded
pointers different builtin contexts, leading to cross-context references
and memory leaks.
After this CL, all TF-generated code stubs are generated inside a
internal thinned-out, native context that lives solely for the
purpose of hosting generated code stubs.
Review URL: https://codereview.chromium.org/1213203007
Cr-Commit-Position: refs/heads/master@{#29593}
This allows running two executables interleaved to reduce
flakiness of tryjobs. The executables must reside in
different out directories.
BUG=chromium:507213
LOG=n
NOTRY=true
TEST=python -m unittest run_perf_test
Review URL: https://codereview.chromium.org/1215273003
Cr-Commit-Position: refs/heads/master@{#29572}
The breakage to Chrome seems to be based on @@isConcatSpreadable
and turning that part off with this patch fixes the Maps Tips & Tricks
test case.
BUG=chromium:507553
LOG=Y
R=adamk
Review URL: https://codereview.chromium.org/1226063002
Cr-Commit-Position: refs/heads/master@{#29545}
Optimize string "length" property access based on static type
information if possible, but also optimistically optimize the access
based on type feedback from the LoadIC.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1216593003
Cr-Commit-Position: refs/heads/master@{#29543}
This prepares for making multiple measurements of one trace.
For this, the suite/trace configurations need to be
independent of the measurement instances.
BUG=chromium:507213
LOG=n
NOTRY=true
Review URL: https://codereview.chromium.org/1227033002
Cr-Commit-Position: refs/heads/master@{#29531}
The RawMachineAssembler will be used to build the interpreter, so it needs
to move back to src/compiler.
This reverts commit b5b00cc031.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1221303014
Cr-Commit-Position: refs/heads/master@{#29519}
We have to reland these two commits at once, because the first breaks
some asm.js benchmarks without the second. The change was reverted
because of bogus checks in the verifier, which will not work in the
presence of OSR (and where hidden because of the type back propagation
hack in OSR so far). Original messages are below:
[turbofan] Add new JSFrameSpecialization reducer.
The JSFrameSpecialization specializes an OSR graph to the current
unoptimized frame on which we will perform the on-stack replacement.
This is used for asm.js functions, where we cannot reuse the OSR
code object anyway because of context specialization, and so we could as
well specialize to the max instead.
It works by replacing all OsrValues in the graph with their values
in the JavaScriptFrame.
The idea is that using this trick we get better performance without
doing the unsound backpropagation of types to OsrValues later. This
is the first step towards fixing OSR for TurboFan.
[turbofan] Perform OSR deconstruction early and remove type propagation.
This way we don't have to deal with dead pre-OSR code in the graph
and risk optimizing the wrong code, especially we don't make
optimistic assumptions in the dead code that leaks into the OSR code
(i.e. deopt guards are in dead code, but the types propagate to OSR
code via the OsrValue type back propagation).
BUG=v8:4273
LOG=n
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1226673005
Cr-Commit-Position: refs/heads/master@{#29486}
The JSFrameSpecialization specializes an OSR graph to the current
unoptimized frame on which we will perform the on-stack replacement.
This is used for asm.js functions, where we cannot reuse the OSR code
object anyway because of context specialization, and so we could as well
specialize to the max instead.
It works by replacing all OsrValues in the graph with their values in
the JavaScriptFrame.
The idea is that using this trick we get better performance without
doing the unsound backpropagation of types to OsrValues later. This is
the first step towards fixing OSR for TurboFan.
R=jarin@chromium.org
BUG=v8:4273
LOG=n
Review URL: https://codereview.chromium.org/1225683004
Cr-Commit-Position: refs/heads/master@{#29476}
Conditionally including Array and TypedArray methods seems to cause
a slowdown in V8 context creation, possibly due to the new code added.
BUG=chromium:504629
R=adamk@chromium.org
LOG=Y
Review URL: https://codereview.chromium.org/1215863003
Cr-Commit-Position: refs/heads/master@{#29430}
Separated core greedy allocator concepts, exposing the APIs we would want to continue working with. In particular, this change completely reworks CoalescedLiveRanges to reflect the fact that we expect more than one possible conflict, scrapping the initial design of the structure. Since this is a critical part of the design, this change may be thought of as a full rewrite of the algorithm.
Reduced all heuristics to just 2 essential ones: split "somewhere", which we'll still need when all other heuristics fail; and spill.
Introduced a simple primitive for splitting - at GapPosition::START. The goal is to use such primitives to quickly and reliably author heuristics.
I expected this primitive to "just work" for any arbitrary instruction index within a live range - e.g. its middle. That's not the case, it seems to upset execution in certain scenarios. Restricting to either before/after use positions seems to work. I'm still investigating what the source of failures is in the case of "arbitrary instruction in the range" case.
I intended to document the rationale and prove the soundness of always using START for splits, but I will postpone to after this last remaining issue is resolved.
Review URL: https://codereview.chromium.org/1205173002
Cr-Commit-Position: refs/heads/master@{#29352}
The android_* configs were never real v8 target
architectures, only make targets. This doesn't make sense
with ninja anymore.
BUG=chromium:502176
LOG=n
NOTRY=true
Review URL: https://codereview.chromium.org/1220743002
Cr-Commit-Position: refs/heads/master@{#29349}
Without this change, V8 won't build on RHEL/CentOS 6 because the distro
python is too old to know about the argparse module.
Can this commit be cherry-picked to the 4.4 branch? It should apply
cleanly.
BUG=
Review URL: https://codereview.chromium.org/1192973004
Cr-Commit-Position: refs/heads/master@{#29186}
The three different concerns that the ControlReducer used to deal with
are now properly separated into
a.) DeadCodeElimination, which is a regular AdvancedReducer, that
propagates Dead via control edges,
b.) CommonOperatorReducer, which does strength reduction on common
operators (i.e. Branch, Phi, and friends), and
c.) GraphTrimming, which removes dead->live edges from the graph.
This will make it possible to run the DeadCodeElimination together with
other passes that actually introduce Dead nodes, i.e. typed lowering;
and it opens the door for general inlining without two stage fix point
iteration.
To make the DeadCodeElimination easier and more uniform, we basically
reverted the introduction of DeadValue and DeadEffect, and changed the
Dead operator to produce control, value and effect. Note however that
this is not a requirement, but merely a way to make dead propagation
easier and more uniform. We could always go back and decide to have
different Dead operators if some other change requires that.
Note that there are several additional opportunities for cleanup now,
i.e. OSR deconstruction could be a regular reducer now, and we don't
need to use TheHole as dead value marker in the GraphReducer. And we can
actually run the dead code elimination together with the other passes
instead of using separate passes over the graph. We will do this in
follow up CLs.
R=jarin@chromium.org, mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1193833002
Cr-Commit-Position: refs/heads/master@{#29146}
Adds a script for converting gc nvp output into csv files. Factors out common
code in gc-nvp-trace-processor.py to gc_nvp_common.py to be shared by both
scripts. Fixes a couple of issues in nvp parsing code.
Review URL: https://codereview.chromium.org/1175113008
Cr-Commit-Position: refs/heads/master@{#29141}
Up until now that was still mixed with control reduction in the
ControlReducer. This separation allows us to remove the horrible
Reducer::Finish hack and also do graph trimming at more appropriate
places in the pipeline (i.e. trim dead nodes after generic lowering,
which can also make nodes dead).
R=jarin@chromium.org,mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1188433010
Cr-Commit-Position: refs/heads/master@{#29077}
Opportunistically removed GreedyAllocator::TryReuseSpillForPhi because it is actually unsuitable for Greedy. It was copied from Linear and it relies on hints, however, the current implementation of hints assumes linear scan.
This change doesn't aim to address performance nor correctness for Greedy.
BUG=
Review URL: https://codereview.chromium.org/1184183002
Cr-Commit-Position: refs/heads/master@{#29054}
This patch includes the following changes.
1, Enable the turbofan backend support for X87 platform. It depends on previous CL: 3fdfebd26.
2, Enable the test cases which are disabled because turbofan for X87 was not enabled.
BUG=v8:4135
LOG=N
Review URL: https://codereview.chromium.org/1179763004
Cr-Commit-Position: refs/heads/master@{#29049}
Reason for revert:
All build problems had other reasons.
Original issue's description:
> Revert of [test] Refactoring - Let runner handle test IDs. (patchset #1 id:1 of https://codereview.chromium.org/1168303007/)
>
> Reason for revert:
> [Sheriff] Revert until the tree is in a better state.
>
> Original issue's description:
> > [test] Refactoring - Let runner handle test IDs.
> >
> > This prepares for properly rerunning tests. Currently when
> > tests are rerun, the same test object is reused. This
> > will be changed in a follow up.
> >
> > Committed: https://crrev.com/f41a81b8a513fc360c500c066b74f223bc9c0223
> > Cr-Commit-Position: refs/heads/master@{#28864}
>
> TBR=jkummerow@chromium.org,tandrii@chromium.org
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
>
> Committed: https://crrev.com/f83444a5f24381ec9ccc28b1e18e1e9370415bb2
> Cr-Commit-Position: refs/heads/master@{#28891}
TBR=jkummerow@chromium.org,tandrii@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1179483002
Cr-Commit-Position: refs/heads/master@{#28903}
Reason for revert:
All build problems had other causes.
Original issue's description:
> Revert of [test] Refactoring - Use subject/observer pattern for progress indicators. (patchset #3 id:40001 of https://codereview.chromium.org/1171943002/)
>
> Reason for revert:
> might break stuff
>
> Original issue's description:
> > [test] Refactoring - Use subject/observer pattern for progress indicators.
> >
> > This should prevent bugs caused by missing super calls in
> > overridden methods. The assumption is that methods of
> > different indicators are independent.
> >
> > Committed: https://crrev.com/fbe973ff1722a6158a5b2babce9c1a32d26a1d3b
> > Cr-Commit-Position: refs/heads/master@{#28866}
>
> TBR=jkummerow@chromium.org,tandrii@chromium.org
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
>
> Committed: https://crrev.com/2a3962d9d2a7415378811f4d56522531332d5a3e
> Cr-Commit-Position: refs/heads/master@{#28869}
TBR=jkummerow@chromium.org,tandrii@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1176863002
Cr-Commit-Position: refs/heads/master@{#28901}
Reason for revert:
[Sheriff] Revert until the tree is in a better state.
Original issue's description:
> [test] Refactoring - Let runner handle test IDs.
>
> This prepares for properly rerunning tests. Currently when
> tests are rerun, the same test object is reused. This
> will be changed in a follow up.
>
> Committed: https://crrev.com/f41a81b8a513fc360c500c066b74f223bc9c0223
> Cr-Commit-Position: refs/heads/master@{#28864}
TBR=jkummerow@chromium.org,tandrii@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1167343003
Cr-Commit-Position: refs/heads/master@{#28891}
Reason for revert:
[Sheriff] Still lots of breakages on some builders. E.g. http://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20nosnap/builds/3313
Original issue's description:
> Update Test262 to 5/30
>
> This updates the test runner to run all tests in both sloppy
> and strict mode.
>
> It also marks the test in the status file as failing in
> sloppy mode even if all it does is marking the test as
> [PASS, FAIL]. A future CL will have to validate that the
> tests pass and fail in the correct mode.
>
> Committed: https://crrev.com/d869f4a4801d4ef6868c266c07f9e29d2e29cba5
> Cr-Commit-Position: refs/heads/master@{#28879}
TBR=rossberg@chromium.org,arv@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1173933002
Cr-Commit-Position: refs/heads/master@{#28890}
This updates the test runner to run all tests in both sloppy
and strict mode.
It also marks the test in the status file as failing in
sloppy mode even if all it does is marking the test as
[PASS, FAIL]. A future CL will have to validate that the
tests pass and fail in the correct mode.
Review URL: https://codereview.chromium.org/1136553008
Cr-Commit-Position: refs/heads/master@{#28879}
Pushed the detection logic down to ParseAndClassifyIdentifier in
preparation to having patterns in parameter positions.
R=arv@chromium.org,rossberg@chromium.org,wingo@igalia.com
BUG=v8:811
LOG=N
Review URL: https://codereview.chromium.org/1170153003
Cr-Commit-Position: refs/heads/master@{#28876}
Reason for revert:
might break stuff
Original issue's description:
> [test] Refactoring - Use subject/observer pattern for progress indicators.
>
> This should prevent bugs caused by missing super calls in
> overridden methods. The assumption is that methods of
> different indicators are independent.
>
> Committed: https://crrev.com/fbe973ff1722a6158a5b2babce9c1a32d26a1d3b
> Cr-Commit-Position: refs/heads/master@{#28866}
TBR=jkummerow@chromium.org,tandrii@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1163373005
Cr-Commit-Position: refs/heads/master@{#28869}
This should prevent bugs caused by missing super calls in
overridden methods. The assumption is that methods of
different indicators are independent.
Review URL: https://codereview.chromium.org/1171943002
Cr-Commit-Position: refs/heads/master@{#28866}
This prepares for properly rerunning tests. Currently when
tests are rerun, the same test object is reused. This
will be changed in a follow up.
Review URL: https://codereview.chromium.org/1168303007
Cr-Commit-Position: refs/heads/master@{#28864}
Constants are taken from chromium/src/google_breakpad/common/minidump_cpu_arm64.h
BUG=
Review URL: https://codereview.chromium.org/1149293005
Cr-Commit-Position: refs/heads/master@{#28785}
In a nutshell: The FILTER_KEY builtin is gone, and was replaced by a
simple runtime call to ForInFilter, which does everything and is even
cheaper (because FILTER_KEY used to call into the runtime anyway).
And ForInFilter returns either the name or undefined, which makes it
possible to remove the control flow construction from the AstGraphBuilder,
and thereby make both the initialization and the per-loop code of for-in
optimizable later (in typed lowering).
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1160983004
Cr-Commit-Position: refs/heads/master@{#28711}
The SimplifiedOperatorReducer is (mostly) unused, except for the very
rough store elimination, and just eats compilation time.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1162563002
Cr-Commit-Position: refs/heads/master@{#28673}
Without this change, wildcards always overwrite the outcomes
of more specific rules. Now we always merge.
Review URL: https://codereview.chromium.org/1153073002
Cr-Commit-Position: refs/heads/master@{#28629}
This adds a new external type (v8::SharedArrayBuffer) that uses a JSArrayBuffer
under the hood. It can be distinguished from an ArrayBuffer by the newly-added
is_shared() bit.
Currently there is no difference in functionality between a SharedArrayBuffer
and an ArrayBuffer. However, a future CL will add the Atomics API, which is
only available on an SharedArrayBuffer. All non-atomic accesses are identical
to ArrayBuffer accesses.
LOG=N
BUG=
Review URL: https://codereview.chromium.org/1136553006
Cr-Commit-Position: refs/heads/master@{#28594}
Reason for revert:
breaks build
Original issue's description:
> Implement SharedArrayBuffer.
>
> This adds a new external type (v8::SharedArrayBuffer) that uses a JSArrayBuffer under the hood. It can be distinguished from an ArrayBuffer by the newly-added is_shared() bit.
>
> Currently there is no difference in functionality between a SharedArrayBuffer and an ArrayBuffer. However, a future CL will add the Atomics API, which is only available on an SharedArrayBuffer. All non-atomic accesses are identical to ArrayBuffer accesses.
>
> BUG=
>
> Committed: https://crrev.com/57170bff7baf341c666252a7f6a49e9c08d51263
> Cr-Commit-Position: refs/heads/master@{#28588}
TBR=jarin@chromium.org,jochen@chromium.org,binji@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1149203003
Cr-Commit-Position: refs/heads/master@{#28589}
This adds a new external type (v8::SharedArrayBuffer) that uses a JSArrayBuffer under the hood. It can be distinguished from an ArrayBuffer by the newly-added is_shared() bit.
Currently there is no difference in functionality between a SharedArrayBuffer and an ArrayBuffer. However, a future CL will add the Atomics API, which is only available on an SharedArrayBuffer. All non-atomic accesses are identical to ArrayBuffer accesses.
BUG=
Review URL: https://codereview.chromium.org/1136553006
Cr-Commit-Position: refs/heads/master@{#28588}
This will send automatic email notifications about reliable
failures from the respective jobs.
NOTRY=true
Review URL: https://codereview.chromium.org/1147713002
Cr-Commit-Position: refs/heads/master@{#28448}
The simd.js benchmarks reside in the same repository
that holds the compliance tests.
Adding an option to run-test.py to download test data
and exit, so that a recipe to run the simd.js
benchmarks can call run-test.py with this option
to fetch the test data.
BUG=https://code.google.com/p/v8/issues/detail?id=4124
LOG=N
TEST=manual verification it works.
NOTRY=true
R=machenbach@chromium.org
Review URL: https://codereview.chromium.org/1140353002
Cr-Commit-Position: refs/heads/master@{#28446}
All the builtin iterators as well as the generator objects have an
object called %IteratorPrototype% in the spec between them and
%ObjectPrototype%.
BUG=v8:3568
LOG=N
Review URL: https://codereview.chromium.org/1128233008
Cr-Commit-Position: refs/heads/master@{#28426}
This patch:
- Refactors Parser::ParseVariableDeclarations
- Introduces Parser::PatternMatcher class
- Implements matching a single variable pattern
- Implements rudimentary matching against object literal pattern
as a proof of concept
R=arv@chromium.org,rossberg@chromium.org
BUG=v8:811
LOG=N
Review URL: https://codereview.chromium.org/1130623004
Cr-Commit-Position: refs/heads/master@{#28345}
Instead of making them an extra option that gets passed in and compiled
at the end of the natives file for a given run of js2c, we now make them a
separate run of js2c with a separate natives file output.
This natives file output is then compiled in the bootstrapper. It is not part
of the snapshot (yet), but instead is treated similar to the experimental
natives, just without any of the complexity that comes from tieing the
behavior to flags. We also don't need counterparts to
InitializeExperimentalGlobal and InstallExperimentalNativeFunctions (yet?).
This fixes the issue with https://codereview.chromium.org/1129743003 by making
the dummy file that is generated for snapshots with no extras (or no experimental
features) nonempty.
R=yangguo@chromium.org, jochen@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1130993003
Cr-Commit-Position: refs/heads/master@{#28311}
Reason for revert:
https://build.chromium.org/p/client.v8/builders/V8-Blink%20Linux%2064%20%28dbg%29/builds/2745
Original issue's description:
> Make V8 extras a separate type of native
>
> Instead of making them an extra option that gets passed in and compiled
> at the end of the natives file for a given run of js2c, we now make them a
> separate run of js2c with a separate natives file output.
>
> This natives file output is then compiled in the bootstrapper. It is not part
> of the snapshot (yet), but instead is treated similar to the experimental
> natives, just without any of the complexity that comes from tieing the
> behavior to flags. We also don't add counterparts to
> InitializeExperimentalGlobal and InstallExperimentalNativeFunctions, yet.
>
> R=yangguo@chromium.org, jochen@chromium.org
> BUG=
>
> Committed: https://crrev.com/c93aff4ac63ad9ffb6318e750335208de32b7902
> Cr-Commit-Position: refs/heads/master@{#28296}
TBR=jochen@chromium.org,yangguo@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1131903002
Cr-Commit-Position: refs/heads/master@{#28299}
Instead of making them an extra option that gets passed in and compiled
at the end of the natives file for a given run of js2c, we now make them a
separate run of js2c with a separate natives file output.
This natives file output is then compiled in the bootstrapper. It is not part
of the snapshot (yet), but instead is treated similar to the experimental
natives, just without any of the complexity that comes from tieing the
behavior to flags. We also don't add counterparts to
InitializeExperimentalGlobal and InstallExperimentalNativeFunctions, yet.
R=yangguo@chromium.org, jochen@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1129743003
Cr-Commit-Position: refs/heads/master@{#28296}
Tail calls are matched on the graph, with a dedicated tail call
optimization that is actually testable. The instruction selection can
still fall back to a regular if the platform constraints don't allow to
emit a tail call (i.e. the return locations of caller and callee differ
or the callee takes non-register parameters, which is a restriction that
will be removed in the future).
Also explicitly limit tail call optimization to stubs for now and drop
the global flag.
BUG=v8:4076
LOG=n
Review URL: https://codereview.chromium.org/1114163005
Cr-Commit-Position: refs/heads/master@{#28219}
usage: This tool analyzes the commit range between <of> and <until>. It finds commits which belong together e.g. Implement/Revert pairs and Implement/Port/Revert triples. All supplied hashes need to be from the same branch e.g. master.
Example for M42: ./search_related_commits.py --prettyprint --separator e0110920d6b856e87859b1c2a34956
BUG=
NOTRY=true
Review URL: https://codereview.chromium.org/1098123002
Cr-Commit-Position: refs/heads/master@{#28197}
Now it's possible to specify the desired trybots for perf
tries, e.g.:
tools/try_perf.py --linux64_haswell octane sunspider
BUG=chromium:478460
LOG=n
NOTRY=true
Review URL: https://codereview.chromium.org/1114913002
Cr-Commit-Position: refs/heads/master@{#28142}
js2c.py now distinguishes between the JS internal sources and any
extra scripts passed in. The latter only get validation and
comment/trailing whitespace removal applied now.
Also added a --js option to js2c.py, which will output a JS file
instead of a C++ file, for debugging. (I got tired of finding the
generated .cc file and extracting its byte array so that I could feed
it to a separate helper script I wrote.)
R=yangguo@chromium.org, jochen@chromium.org
BUG=v8:4064
LOG=N
Review URL: https://codereview.chromium.org/1117663002
Cr-Commit-Position: refs/heads/master@{#28133}
We shouldn't have shared state between isolates by default. The embedder
is free to pass the same allocator to all isolates it creates.
BUG=none
R=dcarney@chromium.org
LOG=y
Review URL: https://codereview.chromium.org/1116633002
Cr-Commit-Position: refs/heads/master@{#28127}
Currently only the Win64 bots report this warnings, which adds quite
some overhead to the development process. With this flag we also get
compiler warnings about implicit 64bit to 32bit truncations when
building with clang on Linux/x64 and Mac/x64.
R=svenpanne@chromium.org
Review URL: https://codereview.chromium.org/1111733002
Cr-Commit-Position: refs/heads/master@{#28093}
This changes the unittests suite to be run in only the default variant,
because unit tests are (and should be) written to be independent from
global flags.
R=machenbach@chromium.org
Review URL: https://codereview.chromium.org/1067863007
Cr-Commit-Position: refs/heads/master@{#28054}
These tests are based on individual tests from the Emscripten benchmark
suite, which are used to test Emscripten itself. We adopt them to test
asm.js code paths in V8.
TBR=machenbach@chromium.org
Review URL: https://codereview.chromium.org/1101493002
Cr-Commit-Position: refs/heads/master@{#27962}
This adds a stripped down version of the SQLite benchmark (running with
--size 1) to the mjsunit suite. We might want to move that to a
dedicated slow/stress/whatever test suite once an appropriate decision
is made.
R=machenbach@chromium.org
Review URL: https://codereview.chromium.org/1094043002
Cr-Commit-Position: refs/heads/master@{#27930}
This flag is intended as a staging flag for TurboFan. It serves as a
single flag that always enables a most recent configuration of TurboFan
for test suites and benchmarks, without needing to update test drivers.
R=titzer@chromium.org,machenbach@chromium.org
Review URL: https://codereview.chromium.org/1094573002
Cr-Commit-Position: refs/heads/master@{#27896}
Will be used for calculating changes between versions
BUG=
NOTRY=true
Review URL: https://codereview.chromium.org/1095483002
Cr-Commit-Position: refs/heads/master@{#27882}
Split interface and implementation of ControlEquivalence and add a
dedicated trace flag --trace-turbo-ceq to make it reusable outside the
scheduler.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1056093005
Cr-Commit-Position: refs/heads/master@{#27862}
Always use the same branch name (the old version leaked
branches). Always try to delete a possibly existing branch
on start-up and also clean up in the end.
NOTRY=true
TBR=tandrii@chromium.org
Review URL: https://codereview.chromium.org/1077633002
Cr-Commit-Position: refs/heads/master@{#27722}
Don't create local branches or otherwise manipulate the
checkout. This reads refs from remote branches and
reads file contents using show. It is faster and requires
less bootstrapping and cleanup.
TBR=tandrii@chromium.org
NOTRY=true
Review URL: https://codereview.chromium.org/1060013003
Cr-Commit-Position: refs/heads/master@{#27640}
In case the v8 revision in chromium was set to an older
revision that's not in the list of recent v8 releases, the
script will bail out too early. This changes iterates over
10 more revisions, which should cover all exceeding revisions
in branch period.
NOTRY=true
TBR=hablich@chromium.org
Review URL: https://codereview.chromium.org/1067793002
Cr-Commit-Position: refs/heads/master@{#27622}
[-h] [-g GIT_DIR] hash
positional arguments:
hash Hash of the commit to be searched.
optional arguments:
-h, --help show this help message and exit
-g GIT_DIR, --git-dir GIT_DIR
The path to your git working directory.
BUG=
Review URL: https://codereview.chromium.org/1033043002
Cr-Commit-Position: refs/heads/master@{#27563}
Second try. Disabled the tests that were failing due to
https://github.com/tc39/test262/issues/215
This updates test262 to revision d24fd10 (2015/03/11).
The files moved around in the test repo and a lot of new tests are
failing.
BUG=None
LOG=N
R=adamk, rossberg
Review URL: https://codereview.chromium.org/1040093003
Cr-Commit-Position: refs/heads/master@{#27543}
The libdl library is already included on target builds of Android and needs
to be added to the build command line with a particular order to avoid
undefined references in other libraries. Fix this by only explicitly including
it in host builds and relying on the implicit inclusion on target builds.
Also remove the librt hack which is not longer necessary due to the AOSP build
bot having been removed.
BUG=chromium:469973
LOG=Y
Review URL: https://codereview.chromium.org/1036133005
Cr-Commit-Position: refs/heads/master@{#27535}
Reason for revert:
Bot failed to include verifyNotEnumerable function for some screwed up reason.
Original issue's description:
> [es6] Update test262 tests
>
> This updates test262 to revision d24fd10 (2015/03/11).
>
> The files moved around in the test repo and a lot of new tests are
> failing.
>
> BUG=None
> LOG=N
> R=rossberg
>
> Committed: https://crrev.com/4f2fb3835feff3663146f12be42b01a226d0065e
> Cr-Commit-Position: refs/heads/master@{#27522}
TBR=rossberg@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=None
Review URL: https://codereview.chromium.org/1047713002
Cr-Commit-Position: refs/heads/master@{#27525}
This prepares for re-landing crrev.com/956373002
This pulls all decision about the snapshot [no|internal|external] into one rule. Previously, this logic was in separate places and not /quite/ the same, which causes build problems.
BUG=
Review URL: https://codereview.chromium.org/1016603004
Cr-Commit-Position: refs/heads/master@{#27523}
This updates test262 to revision d24fd10 (2015/03/11).
The files moved around in the test repo and a lot of new tests are
failing.
BUG=None
LOG=N
R=rossberg
Review URL: https://codereview.chromium.org/1025043002
Cr-Commit-Position: refs/heads/master@{#27522}
Convert a perf trybot JSON file into a pleasing HTML page. It can read
from standard input or via the --filename option. Examples:
cat results.json | perf-to-html.py --title "ia32 results"
perf-to-html.py -f results.json -t "ia32 results" -o results.html
Options:
-h, --help show this help message and exit
-f FILENAME, --filename=FILENAME
Specifies the filename for the JSON results rather
than reading from stdin.
-t TITLE, --title=TITLE
Optional title of the web page.
-o OUTPUT, --output=OUTPUT
Write html output to this file rather than stdout.
R=machenbach@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1033603004
Cr-Commit-Position: refs/heads/master@{#27496}
This change introduces a liveness analyzer for local variables in frame states.
The main idea is to use the AstGraphBuilder::Environment class to build the control flow graph, and record local variable loads, stores and checkpoints in the CFG basic blocks (LivenessAnalyzerBlock class).
After the graph building finishes, we run a simple data flow analysis over the CFG to figure out liveness of each local variable at each checkpoint. Finally, we run a pass over all the checkpoints and replace dead local variables in the frame states with the 'undefined' value.
Performance numbers for Embenchen are below.
----------- box2d.js
Current --turbo-deoptimization: EmbenchenBox2d(RunTime): 11265 ms.
d8-master --turbo-deoptimization: EmbenchenBox2d(RunTime): 11768 ms.
d8-master: EmbenchenBox2d(RunTime): 10996 ms.
----------- bullet.js
Current --turbo-deoptimization: EmbenchenBullet(RunTime): 17049 ms.
d8-master --turbo-deoptimization: EmbenchenBullet(RunTime): 17384 ms.
d8-master: EmbenchenBullet(RunTime): 16153 ms.
----------- copy.js
Current --turbo-deoptimization: EmbenchenCopy(RunTime): 4877 ms.
d8-master --turbo-deoptimization: EmbenchenCopy(RunTime): 4938 ms.
d8-master: EmbenchenCopy(RunTime): 4940 ms.
----------- corrections.js
Current --turbo-deoptimization: EmbenchenCorrections(RunTime): 7068 ms.
d8-master --turbo-deoptimization: EmbenchenCorrections(RunTime): 6718 ms.
d8-master: EmbenchenCorrections(RunTime): 6858 ms.
----------- fannkuch.js
Current --turbo-deoptimization: EmbenchenFannkuch(RunTime): 4167 ms.
d8-master --turbo-deoptimization: EmbenchenFannkuch(RunTime): 4608 ms.
d8-master: EmbenchenFannkuch(RunTime): 4149 ms.
----------- fasta.js
Current --turbo-deoptimization: EmbenchenFasta(RunTime): 9981 ms.
d8-master --turbo-deoptimization: EmbenchenFasta(RunTime): 9848 ms.
d8-master: EmbenchenFasta(RunTime): 9640 ms.
----------- lua_binarytrees.js
Current --turbo-deoptimization: EmbenchenLuaBinaryTrees(RunTime): 11571 ms.
d8-master --turbo-deoptimization: EmbenchenLuaBinaryTrees(RunTime): 13089 ms.
d8-master: EmbenchenLuaBinaryTrees(RunTime): 10957 ms.
----------- memops.js
Current --turbo-deoptimization: EmbenchenMemOps(RunTime): 7766 ms.
d8-master --turbo-deoptimization: EmbenchenMemOps(RunTime): 7346 ms.
d8-master: EmbenchenMemOps(RunTime): 7738 ms.
----------- primes.js
Current --turbo-deoptimization: EmbenchenPrimes(RunTime): 7459 ms.
d8-master --turbo-deoptimization: EmbenchenPrimes(RunTime): 7453 ms.
d8-master: EmbenchenPrimes(RunTime): 7451 ms.
----------- skinning.js
Current --turbo-deoptimization: EmbenchenSkinning(RunTime): 15564 ms.
d8-master --turbo-deoptimization: EmbenchenSkinning(RunTime): 15611 ms.
d8-master: EmbenchenSkinning(RunTime): 15583 ms.
----------- zlib.js
Current --turbo-deoptimization: EmbenchenZLib(RunTime): 10825 ms.
d8-master --turbo-deoptimization: EmbenchenZLib(RunTime): 11180 ms.
d8-master: EmbenchenZLib(RunTime): 10823 ms.
BUG=
Review URL: https://codereview.chromium.org/949743002
Cr-Commit-Position: refs/heads/master@{#27232}
Instead of the current approach of storing flat vectors in frame states (and possibly reusing the last vector in AST graph builder), this change list builds a tree for the values and tries to reuse the nodes for different frame states. At the moment, we only use this for the local variable part of frame state, but nothing prevents us from using this for all parts.
This change provides two new classes: one for creating the tree (StateValuesCache) and one for iterating the trees (StateValuesAccess).
BUG=
Review URL: https://codereview.chromium.org/1008213002
Cr-Commit-Position: refs/heads/master@{#27222}
Fix the resulting warnings by renaming things apart.
BUG=v8:3947
LOG=n
Review URL: https://codereview.chromium.org/1009373002
Cr-Commit-Position: refs/heads/master@{#27219}
Remembering the current branch is a relic from the past
where no work-dir checkout was used. Now this doesn't give
much benefit and screws up the script if it was left in
a bad state (e.g. after a master restart).
TBR=tandrii@chromium.org
NOTRY=true
Review URL: https://codereview.chromium.org/1002383002
Cr-Commit-Position: refs/heads/master@{#27196}
Provide an intrinsic %MathFloor / %_MathFloor that is used to optimize
both Math.ceil and Math.floor, and use the JS inlining mechanism to
inline Math.ceil into TurboFan code. Although we need to touch code
outside of TurboFan to make this work, this does not affect the way we
handle Math.ceil and/or Math.floor in CrankShaft, because for CrankShaft
the old-style builtin function id based inlining still kicks in first.
Once this solution is stabilized, we can use it for Math.floor as well.
And once that is settled, we can establish it as the unified way to
inline builtins, and get rid of the specialized builtin function id
based inlining at some point.
Note that "builtin" applies to basically every piece of internal
JavaScript/intrinsics based code, so this also applies to the yet to be
defined JavaScript based code stubs and handlers.
BUG=v8:3953
LOG=n
R=yangguo@chromium.org,svenpanne@chromium.org
Review URL: https://codereview.chromium.org/990963003
Cr-Commit-Position: refs/heads/master@{#27086}
Rationale: separate the inputs and outputs of parsing + analysis from the business of compiling (i.e. generating machine code).
BUG=
Review URL: https://codereview.chromium.org/974213002
Cr-Commit-Position: refs/heads/master@{#27078}
This makes now the same simplification as the chromium
release scripts do. For creating branch B from a gnumbd'ed
(aka real) commit X do:
1. Branch Y off the real X
2. Set refs/pending/heads/B to Y
3. Set refs/pending-tags/B to X
4. Set refs/heads/B to X
The old algorithm tried to branch off the pending
correspondent of X. That commit was determined by comparing
tree objects of the real X and commits on pending.
Unfortunately, multiple commits on one branch can refer to
the same tree object, e.g., for commits P, Q, R with R being
the revert of Q, P and R refer to the same tree object.
TBR=tandrii@chromium.org
NOTRY=true
TEST=./script_test.py
TEST=tools/release/create_release.py -a me -r you --dry-run
Review URL: https://codereview.chromium.org/979243004
Cr-Commit-Position: refs/heads/master@{#27042}
Using a git range check for checking progress is wrong when
the last rolled revision and the revision candidate are on
different branches. The range A..B will always show the
commits from the merge-base of A and B until B.
Better compare the tags of the last rolled revision and the
candidate. The candidate's version must be strictly greater
than what's in chromium.
TBR=tandrii@chromium.org
NOTRY=true
TEST=./script_test.py
Review URL: https://codereview.chromium.org/979133002
Cr-Commit-Position: refs/heads/master@{#27021}
Before this change, out of two versions 4.2.13.1 and
4.2.14, the latter would have been considered the newest.
Now, the timestamp of the commit determines the age, which
allows to roll a patched version first. The auto-roller
will only roll forward (i.e. there needs to be a commit
range between the last roll and the new candidate).
Additionally, this CL does some cleanups:
- Use the sheriff detection mechanism in the auto-roller.
- Require the roll revision parameter in the chromium_roll
script to avoid redundancy. The auto_roll script determines
that revision automatically.
- Simplify the revision summary in the commit message. The
summary will now show last_roll..new_roll, which e.g.
includes the version change CL. It'll now show useful
information for cherry-picks, which it didn't before.
- Remove unused clusterfuzz check. That check is part of the
release process script.
TBR=tandrii@chromium.org
NOTRY=true
TEST=./script_test.py
TEST=./tools/release/chromium_roll.py --dry-run --sheriff -c ~/tmp/chromium/src --last-roll 55b9049ea3978a589d8db2aa191d21222eef737f fc263505535a175c8efa18f4c787bd92a1d1ab3d --use-commit-queue -r me -a you
Review URL: https://codereview.chromium.org/977903002
Cr-Commit-Position: refs/heads/master@{#27009}
The auto-push script is only used in an automated fashion
on bots. It doesn't need to check for a clean git
environment as it has a special workdir checkout.
If the release creation fails for whatever reason (e.g.
a master restart happens in the middle), the workdir
checkout might be left dirty. Any new attempt of the auto
pusher then bails out.
After this change it will call the create_release script
in any case which tidies up the workspace on startup.
TBR=tandrii@chromium.org
NOTRY=true
TEST=./script_test.py
Review URL: https://codereview.chromium.org/960773007
Cr-Commit-Position: refs/heads/master@{#26928}
Side note: tools/v8-info.sh seems to have been broken ever
since the move to git. At least it's not more broken now.
BUG=v8:3075
LOG=y
TEST=./script_test.py
Review URL: https://codereview.chromium.org/959713003
Cr-Commit-Position: refs/heads/master@{#26873}
Mechanical change.
This will break dependency between profiler-generator and heap-profiler-generator.
Later this will help us to reuse SourcePosition in cpu-profiler.
BUG=452067
LOG=n
Review URL: https://codereview.chromium.org/945873002
Cr-Commit-Position: refs/heads/master@{#26780}
Add a link with instructions about how to assign v8
issues to the chromium roll commit message.
Remove googler mapping feature as it doesn't apply anymore
to any generalist sheriff.
NOTRY=true
Review URL: https://codereview.chromium.org/938023002
Cr-Commit-Position: refs/heads/master@{#26761}
ModuleDescriptor will end up holding the set of data described in the
spec as a "Module record". This introduces a little bit of confusion
with ModuleInfo, but I hope that'll become clearer over time.
Also removed the interface-printing flags. We probably want
Module-printing flags, but that can wait until we have more
Module-related structures.
BUG=v8:1569
LOG=n
Review URL: https://codereview.chromium.org/935723004
Cr-Commit-Position: refs/heads/master@{#26728}
This adds a new ControlFlowOptimizer that - for now - recognizes chains
of Branches generated by the SwitchBuilder for a subset of javascript
switches into Switch nodes. Those Switch nodes are then lowered to
either table or lookup switches.
Also rename Case to IfValue (and introduce IfDefault) for consistency.
BUG=v8:3872
LOG=n
Review URL: https://codereview.chromium.org/931623002
Cr-Commit-Position: refs/heads/master@{#26691}
Use git hashes as keys when referring to releases, not
pure commit position numbers as those are not unique.
Better bailout to only check for recent releases.
Add new branching method with a roll branch in heads to
the v8rel test case.
Fix the way v8 is referred to in DEPS files in the test
cases. The test still had svn-number style.
BUG=chromium:451975
TBR=tandrii@chromium.org
NOTRY=true
LOG=n
TEST=./script_test.py
Review URL: https://codereview.chromium.org/928243002
Cr-Commit-Position: refs/heads/master@{#26669}
This is needed as normal chromium checkouts don't fetch
branch-heads.
These branches will also be replicated by GitHub and are
fetched when cloning from the repository.
The expected object size will be the same or smaller than
before as we currently push the same information onto the
candidates branch (which already is in refs/heads). The only
difference is the increasing number of refs in refs/heads.
BUG=chromium:451975
TBR=tandrii@chromium.org
NOTRY=true
LOG=n
TEST=./script_test.py
TEST=tools/release/create_release.py -r machenbach@chromium.org -a machenbach@chromium.org --dry-run
Review URL: https://codereview.chromium.org/914973002
Cr-Commit-Position: refs/heads/master@{#26629}
Parser must be able to operate independent of Isolate and the V8 heap during
parsing. After the heap-independent phase, there is a heap dependent phase,
during which we internalize strings, handle errors, etc.
This makes Isolate (also via CompilationInfo) unaccessible during parsing, and
thus decreases the probability of accidental code changes which would add
heap-dependent operations into the heap-independent phase.
Since Isolate is also accessible via CompilationInfo, now CompilationInfo is
only passed to the entry points of parsing, and not stored in Parser.
R=rossberg@chromium.org
BUG=
Review URL: https://codereview.chromium.org/908173003
Cr-Commit-Position: refs/heads/master@{#26612}
Rename tools/vim/v8.ycm_extra_conf.py to .ycm_extra_conf.py, so every
YCM plugin (no matter if it's VIM or Emacs) should pick it up
automatically.
Also move the common tools/vim/ninja_output.py to tools/ninja/ as it's
also not related to VIM.
Review URL: https://codereview.chromium.org/904143003
Cr-Commit-Position: refs/heads/master@{#26602}
These are based on the ninja-build.vim file found in Chromium, adapted
to V8, and enhanced with goma support (automatically increase job limit
for ninja if goma is detected).
Review URL: https://codereview.chromium.org/915963002
Cr-Commit-Position: refs/heads/master@{#26563}
Function.prototype.toMethod was removed from ES6.
This removes the function and updates the tests to either
use %ToMethod or a dedicated syntax (using concise method
or a class).
BUG=v8:3330
LOG=N
R=dslomov@chromium.org, adamk
Review URL: https://codereview.chromium.org/914713002
Cr-Commit-Position: refs/heads/master@{#26559}
Contribution of PowerPC port (continuation of 422063005 and 817143002). This patch covers
the key changes needed to the common files needed to support AIX. Subsequent
patches will cover:
- changes to update the ppc directories so they are current with the changes
in the rest of the project.
- remaining AIX changes not resolved by 4.8 compiler
- individual optimizations for PPC
This is based off of the GitHub repository
https://github.com/andrewlow/v8ppcR=danno@chromium.org, svenpanne@chromium.org
BUG=
Review URL: https://codereview.chromium.org/866843003
Cr-Commit-Position: refs/heads/master@{#26343}
Also refactor the configuration of modes to have the level
of abstraction in one json dict.
In a follow up CL, the new mode could be added to quickcheck
and release trybots.
Review URL: https://codereview.chromium.org/882983002
Cr-Commit-Position: refs/heads/master@{#26322}
Also create new v8 versions based on the roll ref, which
has some more verification steps than the candidate ref.
Improve bailout regarding existing versions. Only create a
new version if the revisions is in the future.
BUG=chromium:451975
TBR=tandrii@chromium.org
NOTRY=true
LOG=n
Review URL: https://codereview.chromium.org/878913002
Cr-Commit-Position: refs/heads/master@{#26303}
Moved and renamed the scripts to fit with git.
These changes require documentation updates, updates of
the release spreadsheet and the buildbot side.
BUG=chromium:451975
TBR=tandrii@chromium.org
NOTRY=true
LOG=n
Review URL: https://codereview.chromium.org/868473004
Cr-Commit-Position: refs/heads/master@{#26271}
This makes some internal renaming, e.g. trunk -> candidates,
bleeding edge -> master, without changing the api.
Also remove some unused bailout steps from the push script.
Remove unused bump version script.
BUG=chromium:451975
TBR=tandrii@chromium.org
NOTRY=true
LOG=n
Review URL: https://codereview.chromium.org/873213002
Cr-Commit-Position: refs/heads/master@{#26269}
(1) --prof-cpp: Collects ticks like --prof, but ignores code creation events to reduce distortion (so all JS ticks will be "unaccounted"). Useful for profiling C++ code.
(2) --timed-range flag for tick processor: Ignores ticks before the first and after the last call to Date.now(). Useful for focusing on the timed section of a test.
Review URL: https://codereview.chromium.org/802333002
Cr-Commit-Position: refs/heads/master@{#26168}
This relands parts of
https://codereview.chromium.org/843913009
It prepares for using this script outside of v8, e.g. in a
chromium hook.
The script is intended to run as a hook and will create
version_gen.cc if the content has changed.
Changes to gyp and gn files can land as a follow up, once
calling the hook on the chromium side has landed.
BUG=chromium:446166
LOG=n
Review URL: https://codereview.chromium.org/830093003
Cr-Commit-Position: refs/heads/master@{#26144}
This relands the CL
https://codereview.chromium.org/797503007/.
It runs the version generation two times. First during
runhooks as a fallback for recipes that loose git context
(e.g. android_aosp). Second during compilation like in the
original CL. In case of failures, the result from the
runhooks call will be reused.
BUG=chromium:446166
LOG=n
Review URL: https://codereview.chromium.org/843913009
Cr-Commit-Position: refs/heads/master@{#26120}
- Make Node::Inputs and Node::Uses mostly STL compliant.
- Get rid of some pre-C++11 crappiness.
- Start moving unit tests from cctest to unittests.
- TrimInputCount() now tries to reserve inputs slots for
later appending.
- Fix numerous style guide violations.
TEST=cctest,unittests
R=dcarney@chromium.org
Review URL: https://codereview.chromium.org/851263002
Cr-Commit-Position: refs/heads/master@{#26098}
- Move NodeMarker to its own file, and introduce a non
templatized base class.
- Cleanup the include hell.
- Sanitize the Node construction methods now that we
got rid of that GenericNode/GenericGraph stuff.
- Protect against NodeId overflow in Graph.
- Various minor cleanups.
TEST=cctest,mjsunit,unittests
Review URL: https://codereview.chromium.org/838783002
Cr-Commit-Position: refs/heads/master@{#25977}
Also slightly refactor the NodeCache and CommonNodeCache classes to
reduce inherent overhead of caching.
TEST=cctest
Review URL: https://codereview.chromium.org/822923002
Cr-Commit-Position: refs/heads/master@{#25937}
