Current approach returns undefined descriptor if caller is not granted v8::HAS_ACCESS.
If the caller has v8::HAS_ACCESS, for no JS accessors regular v8::GET_ACCESS check is
performed and value property of the descriptor is set to undefined if caller doesn't
have proper access. For JS accessors both v8::GET_ACCESS and v8::SET_ACCESS are checked
and affect if getter and setter would be stored in the descriptor.
Review URL: http://codereview.chromium.org/6286020
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@6592 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Record a safepoint with a deoptimization id for throw in optimized code. We
don't seem to much care what the AST ID is because we will not be using it
for lazy deoptimization (throw doesn't return to the point of throw). For
hygiene we use the actual ID of the throw expression. Throw is no longer a
control-flow instruction, but it's followed by an unconditional abnormal
exit. This is required to insert a simulate between the throw and the exit.
Make our optimized treatment of Function.prototype.apply act like a call and
have side effects. This ensures that it will get a lazy deoptimization
environment. Use that deoptimization ID in the safepoint for the call.
Deleting a property was also missing a deoptimization ID, though there was a
deoptimization environment assigned to the instruction. Record the
environment and use the deoptimization ID at the safepoint.
Review URL: http://codereview.chromium.org/6250105
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@6576 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
With crankshaft, a code object can change its optimizability: it can start as
optimizable code object, but later we can find out it was a bad idea to
optimize it. Alas, currently we don't have a proper event to communicate
this back to logger. Hence we temporary allow a code object to be viewed
as optimizable judging from logs while being unoptimizable judging from
heap traversal.
Review URL: http://codereview.chromium.org/6250054
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@6553 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
other situations.
Do not use overwritten Object.prototype.hasOwnProperty and
Array.prototype.pop. Do not use split and join in the error formatting
implementation. They are too big to control and their generality is
not needed.
Review URL: http://codereview.chromium.org/6287041
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@6552 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Fix a bug in the --debug-code alignment check in the C entry stub.
Don't force the --debug-code flag in the ARM disassembler tests. The framework does support passing flags and the test runner will when running tests in debug mode.
Skip some deserialization tests which crashes from time to time.
Review URL: http://codereview.chromium.org/6393007
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@6484 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
ReferenceError.prototype.__proto__ which will make "error instanceof
Error" fail. However, the ReferenceError.prototype object itself
cannot be modified. Therefore, the error checks must check for
concrete error instances instead of only checking for Error.
Review URL: http://codereview.chromium.org/6388003
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@6450 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
conversions for external array types, which implement the Typed Array
spec. (Revision of http://codereview.chromium.org/6315004 .)
Prefer SSE2 code path on x86 processors. Non-SSE2 processors now make
a slow runtime call for float-to-int conversions. Use SSE3 for 32-bit
signed and unsigned int array types where possible.
The movement of code from ic-arm.cc to stub-cache-arm.cc caused the
VFP3 code path to be tested for the first time. Fixed bugs in the
register usage and in the constant value stored into integer arrays
for NaN and +/-Infinity.
Added new truncation test to test-api.cc. Storage of NaN and +/-Inf
was already covered. Ran unit tests on x86, x64 and ARM simulator.
Tested ia32 and x64 code in Chromium on Mac and Linux respectively
with Typed Array unit tests and WebGL content.
BUG=http://code.google.com/p/chromium/issues/detail?id=50972
TEST=test-api/ExternalArrays
Review URL: http://codereview.chromium.org/6303012
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@6431 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This change includes support for safepointtables and adding deoptimization info (but not for deoptimizing).
Implemented crankshaft functions:
CallCode
GenerateSafepointTable
RegisterEnvironmentForDeoptimization
EmitGoto
This change allows us to compile very simple functions with crankshaft:
An empty function
A function returning a constant.
A function returning a parameter.
There is 6 disabled tests that require us to be able to deoptimize
which is currently not supported.
Review URL: http://codereview.chromium.org/6310009
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@6350 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
On 32-bit platforms any pointer with 0 as LSB can be wrapped into Smi. However, on 64-bit
platforms it's currently not the case as x64 Smis must have 0s in lower 32 bit word.
Even worse, macroassembler Move instruction will try to fetch integer value from Smi
and will shift by 32 bits to the right rendering stored pointer incorrect.
BUG=v8:1037
Review URL: http://codereview.chromium.org/6119009
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@6301 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This patch enables two new flags for the tools/test.py script;
--shard-count - giving the ability to split the tests to be run
into shard-count chunks.
--shard-run - giving the ability to specify which of the shards to actually run.
Example
tools/test.py -j15 --shard-count=2 --shard-run=1 mozilla
would split the mozilla tests into two chunks and run the tests in the first chunk
Running:
tools/test.py -j15 --shard-count=2 --shard-run=1 mozilla
tools/test.py -j15 --shard-count=2 --shard-run=2 mozilla
is equivalent (in terms of test coverage) of just running:
tools/test.py -j15 mozilla
In addition, tests are now sorted before they are returned from the
test specific ListTests methods (sputnik and mozilla tests where
already sorted before they where returned).
This change is needed to split a single test suite over two slaves on
the waterfall.
Review URL: http://codereview.chromium.org/6127003
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@6248 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
1. Added gdb style debugger commands (and their shortcuts) for d8.
These include:
- s[tep] : step into the current statement.
- s[tep]i[n]: step into the current statement with the minimum step.
- n[ext] : step to the next statement.
- fin[ish] : step out of the current function.
- cond : setting conditions on breakpoints.
- d[elete] : deletes breakpoints.
- en[able]|dis[able]: enables/disables breakpoints including
exception breakpoints.
- ignore : ignores a breakpoint for a specified period.
- inf[o] ar[gs] : info on arguments of the current function.
- inf[o] lo[cals] : info on local vars of the current function.
- inf[o] br[eakpoints] : info on breakpoints.
- l[ist] : similar to source, but allows the user to continually
dump subsequent lines of source code either in the
forward or backward direction.
- quit / exit / disconnect : terminates the remote debugger
session.
NOTE: Active breakpoints will automatically be disabled when
the remote debugger detaches. This allows v8 to continue to
run without worrying about a loss of a debugger session.
2. Added support for breaking the debugger by simply typing ENTER.
The break command is now optional.
3. Once the debugger is broken, the user can now just type ENTER
to repeat the last command. This is useful to functionality that
needs to be invoked repeatedly e.g. step, list.
4. Added more verbose descriptions in d8's help.
5. Fixed a line and column number offset bug in the listing of breakpoint
line and column numbers.
6. Added a gc command to allow GCs to be requested from the debugger
interface. The plumbing for requesting different types of GCs is
there, but the underlying implementation currently only triggers a
full mark-compact GC. The command also returns the before and after
sizes of the heap.
7. Added trace json, and flags commands that are not published in help.
trace json is used for tracing the debugger packets send from and
received by d8. flags is for setting v8 flags. These are useful for
people debugging v8 itself, but not necessarily users of v8.
8. Added the ability to enable and disable break on all / uncaught
exceptions in to d8.
9. Added a fix to prevent the Debugger Agent from being re-instantiated
if one already exists.
10. Added the ability to filter results of the script command by matching
text or numbers on the results.
11. Added v8 flags to enable/disable the sending of debugger BeforeCompile,
AfterCompile, and ScriptCollected events.
12. Fixed some undefined value bugs that resulted in v8 or the debugger
failing.
13. Added a few minor WEBOS__ customizations (analogous to ANDROID
customizations).
Patch by Mark Lam from Hewlett-Packard Development Company, LP
Review URL: http://codereview.chromium.org/5980006
Review URL: http://codereview.chromium.org/6086010
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@6200 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This is based on the structore used in chromium with a script wrapping the call to gyp itself and the default processing of common.gypi.
It is possible to build all our targets on Intel Linux for all architectures (ia32, x64 and ARM simulator). When this is committed I wil take a look at Windows.
See the README.txt file in the changelist for the current way of using it.
Review URL: http://codereview.chromium.org/5701001
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@6000 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
As taking a snapshot of a large heap takes noticeable time, it's
good to be able to monitor and control it.
The change itself is small, big code deletes and additions are in
fact moves. The only significant change is simplification of
approximated retained sizes calculation algorithm.
Review URL: http://codereview.chromium.org/5687003
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5978 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Approximation is done by building a dominators tree for the heap graph.
Dominator nodes and retained sizes are serialized into JSON.
Removed:
- reachable size (it is useless, after all);
- HeapEntryCalculatedData (size is now stored in the node, retaining
paths in a hash map);
Review URL: http://codereview.chromium.org/5154007
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5867 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Otherwise, retaned memory sizes are not precise. This increases size
of heap snapshot, I will deal with this later. Heap objects and
references previously missing in snapshot are now marked as 'hidden'.
That means, they not shown to user, but participate in sizes
calculation.
Other small changes:
- added 'shortcut' graph edges: e.g. to pin global objects on top
level;
- meta-information in JSON snapshot is no more double encoded.
Review URL: http://codereview.chromium.org/5139002
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5849 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Make checks.h not depend on flags.h or global.h (or anything else except
include/v8stdint.h). Only checks.cc has the dependencies (so another
implementation of checks.cc can be provided by the preparser).
Now files depending on checks.h (using ASSERT macros) can include it
directly without depending on all of v8.
Review URL: http://codereview.chromium.org/4576001
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5775 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Instead of relying on itimer signals from kernel, send them
ourselves from a separate thread. This disables an ability
to profile multiple VM threads on Linux, but it anyway doesn't
work on other platforms, so we need a common solution for
it (issue 913 created to track this).
Review URL: http://codereview.chromium.org/4000007
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5711 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Don't use floating-point operations on Linux,x86 to compute strtod. Since the
floating-point stack on Linux is set to 80bit double rounding may occure.
When falling back to gay_strtod append several '0's so that Gay doesn't take
the same shortcut either.
BUG=
TEST=
Review URL: http://codereview.chromium.org/3851003
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5650 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
HeapNumbers do consume memory, so it's worth dumping them. However, we
don't dump their values, as they are not as self-descriptive as values
of strings, and they will increase snapshot size. Storing heap numbers
values can be added if we will feel a sufficient demand for that.
InternalFields are used, e.g. for storing references to DOM nodes
event handlers.
Review URL: http://codereview.chromium.org/3769007
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5635 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The problem is other array may have holes, for example
when fixed array comes from JSArray (in case of named interceptor).
If that would prove to be a performance problem, we could
pass an additional argument into UnionOfKeys to hold actual length.
Review URL: http://codereview.chromium.org/3595013
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5591 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
during snapshot size optimization.
Sorry, now I figured out that the diff implementation itself was also
incorrect. Reachable nodes must be filtered from the beginning,
otherwise, an object that is already disconnected, but not discarded
yet, will not appear as a deleted (thankfully, this bug for some
reason had appeared on the x64 port.)
BUG=868
TEST=HeapSnapshotRootPreservedAfterSorting
Review URL: http://codereview.chromium.org/3531005
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5570 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Finally sovles the problem that r5342 attempted to solve.
When adding a stub to a map's code cache we need to make
sure that this map is not used by object that do not need
this stub.
Existing solution had 2 flaws:
1. It checked that the map is cached by asking the current context.
If the object escaped into another context then NormalizedMapCache::Contains
returns false negative.
2. If a map gets evicted from the cache we should not try to modify it
even though Contains returns false.
This patch implements much less fragile solution of the same problem:
A map now has a flag (is_shared) that is set once the map is added
to a cache, stays set even after the cache eviction, and is cleared
if the object goes back to fast mode.
Added a regression test.
Review URL: http://codereview.chromium.org/3472006
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5518 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The number of inobject properties used to be derived from the number
of this property assignments in the constructor (and increased by 2 to
allow for properties added later). This very often leads to wasted inobject
slots.
This patch reclaims some of the unused inobject space by the following method:
- for each constructor function the first several objects are allocated using the initial
("generous) instance size estimation (this is called 'tracking phase').
- during the tracking phase map transitions are tracked and actual property counts are collected.
- at the end of the tracking phase instance sizes in the maps are decreased if necessary
(starting with the function's initial map and traversing the transition tree).
- all further allocation use more realistic instance size estimation.
Shrinking generously allocated objects without costly heap traversal is made possible
by initializing their inobject properties with one_pointer_filler_map (instead of undefined).
The initial slack for the generous allocation is increased from 2 to 6 which really helps some tests.
Review URL: http://codereview.chromium.org/3329019
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5510 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
It turns out they were filtered out. But when I unfiltered them, I
discovered another issue: when DevTools run, regexp literals get
recompiled each time they called (looks like this is concerned with
switching to full compiler), so I ended up having multiple entries for
the same regexp. To fix this, I changed the way of how code entries
equivalence is considered.
BUG=crbug/55999
TEST=cctest/test-profile-generator/ProfileNodeFindOrAddChildForSameFunction
(the test isn't for the whole issue, but rather for equivalence testing)
Review URL: http://codereview.chromium.org/3426008
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5492 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
When running profiling in debug mode, several assertions in frame
iterators that are undoubtedly useful when iterator is started from a
VM thread in a known "good" state, may fail when running over a stack
of a suspended VM thread. This patch makes SafeStackFrameIterator
to proactively check addresses and bail out from iteration early,
before an assertion will be triggered.
BUG=crbug/55565
Review URL: http://codereview.chromium.org/3436006
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5467 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
to avoid storing serialized snapshot on VM, instead it is emitted
using output stream interface.
The size of JSON emitted is roughly equal to used heap size
(when stored as an ASCII string).
Now a whole heap snapshot can be serialized and transmitted outside
VM. This makes possible:
- implementing non-async UI for heap snapshots inspection;
- storing heap snapshots for further inspection;
- remote profiling (we can even implement a snapshotting mode
where a snapshot isn't even stored in VM, only transmitted --
good for mobile devices);
- creating tools for outside heap snapshots processing, e.g.
converting to HPROF.
Review URL: http://codereview.chromium.org/3311028
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5450 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The live registers are now only stored to the expression stack with the non pointer values being stored as smis (on the 32-bit platforms these values are assumed to be 31-bit max).
This makes the CEntryStub entry/exit code much simpler, and there is no longer any need for a mode (debug or normal) on it.
Fix a missing live register when breaking at ARM keyed load.
Review URL: http://codereview.chromium.org/3141047
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5358 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The collector class automatically expands to hold the values added to it,
like a List, but doesn't ensure that the backing store is contiguous, which
allows it to avoid copying back and forth as the buffer grows.
This is in preparation for identifyng identical symbols during preparsing.
Review URL: http://codereview.chromium.org/3181036
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5325 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Eventually indexed property query callbacks will return attributes
(as an integer) or an empty handle if property is not intercepted.
To gradually migrate to this new API, USE_NEW_QUERY_CALLBACK
macro would control if old or new style API is used.
So the migration plan is:
1) introduce new API which should be explictily enabled;
2) switch to new API defining USE_NEW_QUERY_CALLBACK before
include of <v8.h> (that would require changes to client code as well)
3) remove old API from v8
4) remove #define USE_NEW_QUERY_CALLBACK from clients.
BUG=http://code.google.com/p/v8/issues/detail?id=816
Review URL: http://codereview.chromium.org/3101001
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5228 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Added Nl category to letters predicate (as requried for JS identifiers).
Changed/simplified representation of canonicalization ranges.
Truncated tables to code points in the BMP (all that is used by JS).
Reformatted tables to avoid excessively long lines.
Removed duplicate entries from multi-character mapping result tables.
Review URL: http://codereview.chromium.org/3030026
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5155 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
If object enters NEAR_DEATH state, it must be explicitly cleared and/or disposed, otherwise
it would retain JS object forever. Note as well that parameter is reset to NULL on first
invocation so weak handle callback would be in hard situation.
Review URL: http://codereview.chromium.org/3011009
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5096 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
To trace objects between snapshots, an external map of object tags is
maintained. After the first heap snapshot has been taken, the map is
updated by reporting object moves from the GC. If no snapshots were
taken, there is no overhead (except for flag checking).
I considered graph comparison algorithms that doesn't require using
object tags, but they are all of a high computational complexity, and
will still fail to detect object moves properly, even for trivial
cases, so using tags looks like unavoidable.
Review URL: http://codereview.chromium.org/3020002
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5078 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
When removing debug_info from SharedFunctionInfo, clear all breakpoints associated with that debug_info.
This is needed because function will live in heap until next gc, and therefore can be found
by Runtime::FindSharedFunctionInfoInScript.
Review URL: http://codereview.chromium.org/2848032
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4997 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
When calculating Math.pow where the exponent is a smi use a simple loop to calculate the result.
Added support for the vmov instruction moving from one doubleword extension register to another.
Added some Math.pow tests which partially covers what is in the Sputnik tests.
Review URL: http://codereview.chromium.org/2804033
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4990 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Zhang Kun. For now we only emit movw and movt in places where no
relocation is needed. Small performance boost (around 0.5%).
Also adds support for turning ALU operations (eor etc.) with
large immediates into mvn or movw followed by a register-based
ALU operation.
Review URL: http://codereview.chromium.org/2821014
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4913 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This changes the way the constants kJSObjectType, kFirstNonstringType and kProxyType are made available to the inlined part of the V8 API. This change to fixed constants resolves linker this linker error Windows
error LNK2001: unresolved external symbol "public: static int v8::internal::Internals::kJSObjectType" (?kJSObjectType@Internals@internal@v8@@2HA)
when linking against a V8 DLL.
This change also makes it possible to build all the C++ tests with ENABLE_DEBUGGER_SUPPORT not defined. Now C++ tests run ENABLE_DEBUGGER_SUPPORT not defined, and only the JavaScript tests which tests the debugger fails when ENABLE_DEBUGGER_SUPPORT is not defined.
Review URL: http://codereview.chromium.org/2820016
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4898 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Added support for more precise break points when debugging and stepping. To achieve that additional nop instructions are inserted where breaking would otherwise be impossible. The number of nop instructions inserted are sufficient to make place for patching with a call to a debug break code stub. On Intel that is 5 nop's for 32-bit and 13 for 64-bit. Om ARM 3 nop instructions (12 bytes) are required.
In order to avoid inserting nop's in to many places a simple ast checker have been added to check whether there are breakable code in a statement or expression. If it is possible to break in an expression no additional break enabeling code is inserted.
Added break locations to the true and false part of a conditional expression.
Added stepping tests to cover more constructs.
These changes are only in the full compiler.
Changed the default value for the option --debugger in teh d8 shell from true to false. The reason for this is that with --debugger turned on the full compiler will be used for all code in when running d8, which can be unexpeceted.
Review URL: http://codereview.chromium.org/2693002
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4820 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Changed the disposal of external string resources to call a virtual Dispose method on the resource. The default inplementation of Dispose deletes the object and will capture the delete operator matching the new operator used to allocate the object.
Review URL: http://codereview.chromium.org/2658008
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4816 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This adds an additional step to full gc, removing code from functions
that are no longer in the compilation cache. The code is replaced with
a lazy compile version enabling us to recompile the function in case
we do actually need it again.
Review URL: http://codereview.chromium.org/2632003
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4814 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Eventually named property query callbacks will return attributes
(as an integer) or an empty handle if property is not intercepted.
To gradually migrate to this new API, USE_NEW_QUERY_CALLBACK
macro would control if old or new style API is used.
So the migration plan is:
1) introduce new API which should be explictily enabled;
2) switch to new API defining USE_NEW_QUERY_CALLBACK before
include of <v8.h> (that would require changes to client code as well)
3) remove old API from v8
4) remove #define USE_NEW_QUERY_CALLBACK from clients.
Review URL: http://codereview.chromium.org/2576003
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4797 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Currently if there is no query callback, V8 finds out intercepted properties'
attributes using getter: if getter returns not empty handle V8 treats
such a property as property with NONE attribues which means this property
is enumerable.
However, if there is no enumerator, this property cannot be enumerated.
Thus I think we should treat such properties as not enumerable.
Drawback of this approach is now one has to implement both query and enumerator
callbacks to implement enumerable intercepted properties.
BUG=725
Review URL: http://codereview.chromium.org/2270005
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4751 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
1) do not push receiver early---that simplifies tail call preparation
on ia32/x64 and renders special cleanup unnecessary;
2) do not do second map check if interceptor's and cached holder
are the same;
3) do not push/pop receiver if receiver and holder registers are the same
(means that receiver is interceptor's holder);
4) do batch pushes on arm;
5) minor cosmetic improvements.
Review URL: http://codereview.chromium.org/2282001
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4732 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The full compiler is now complete on ARM as well. The syntax checker is still used to determine whether to use it for top level code or not during normal execution. When debugging is enabled all code will be compiled with the full compiler.
This change removes the temporary flag --force-full-compiler and now the flag --always-full-compiler enables the full compiler for all code on all platforms.
This also fixes building on Intel platform without debugger support (ENABLE_DEBUGGER_SUPPORT not defined) and adds full check for the full compiler for lazily compiled code.
Review URL: http://codereview.chromium.org/2163006
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4716 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
- New сardmarking write barrier handles large objects and normal objects in a similar fashion (no more additional space for pointer tracking is required, no conditional branches in WB code).
- Changes to enable oldspaces iteration without maps decoding:
-- layout change for FixedArrays: length is stored as a smis (initial patch by
Kevin Millikin)
-- layout change for SharedFunctionInfo: integer fields are stored as smi on
arm, ia32 and rearranged on x64.
-- layout change for String: meaning of LSB bit is fliped (1 now means hash not
computed); on x64 padding is added.
-- layout of maps is _not_ changed. Map space is currently iterated in a special
way.
Review URL: http://codereview.chromium.org/2144006
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4715 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Currently one can only define accessors on object templates. This patch
allows to create accessors on the fly.
These accessors could control access to elements as well. This element
support is somewhat rudimentary and may require future work (for example,
we probably don't want to convert index into a string.)
Review URL: http://codereview.chromium.org/2123012
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4714 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Changing ScriptData API to serialize its internal representation to a
const char* array.
This decouples the API from the internal representation and avoids the need for
callers to serialize themselves.
As a side-effect, ScriptData::New() no longer assumes ownership of its input.
This shouldn't matter as typical usage patterns for the old API would have
required a copy prior to calling ScriptData::New().
Review URL: http://codereview.chromium.org/2118010/show
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4710 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
-- layout change for FixedArrays: length is stored as a smis (initial patch by Kevin Millikin)
-- layout change for SharedFunctionInfo: integer fields are stored as smi on arm, ia32 and rearranged on x64.
-- layout change for String: meaning of LSB bit is fliped (1 now means hash not computed); on x64 padding is added.
-- layout of maps is _not_ changed. Map space is currently iterated in a special way.
- Cardmarking write barrier. New barrier handles large objects and normal objects in a similar fashion (no more additional space for pointer tracking is required, no conditional branches in WB code).
Review URL: http://codereview.chromium.org/2101002
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4685 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The full compiler will now be used for all code compiler when debugging is active. As the code generated by the full compiler is much simpler it will be easier to make debugging work better when using that code.
To ensure that all code debugged is from the full compiler all functions will have to be recompiled when starting debugging. Initialing debugging already turns off the code cache.
Review URL: http://codereview.chromium.org/2120009
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4680 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
As several pages can run in a single V8 instance, it is possible to
have functions from different security contexts intermixed in a single
CPU profile. To avoid exposing function names from one page to
another, filtering is introduced.
The basic idea is that instead of capturing return addresses from
stack, we're now capturing JSFunction addresses (as we anyway work
only with JS stack frames.) Each JSFunction can reach out for
context's security token. When providing a profile to a page, the
profile is filtered using the security token of caller page. Any
functions with different security tokens are filtered out (yes, we
only do fast path check for now) and their ticks are attributed to
their parents.
Review URL: http://codereview.chromium.org/2083005
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4673 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
- RelinkPageListInChunkOrder might relink unused pages into the middle of a sequence of used pages. Filler objects should be placed at the beginning of such unused pages otherwise generic iterators (e.g. HeapObjectIterator) would not handle them correctly.
- ObjectAreaEnd() should not be used as an allocation limit for pages from FixedSpace. Pages in such spaces do not use top page_extra_ bytes of object area.
TBR=ager@chromium.org
Review URL: http://codereview.chromium.org/1700005
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4476 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The simple formula "ms = ticks * sampler_interval" doesn't work,
because e.g. on Linux, the actual sampling rate can be 5 times
lower than the one set up in the code. To calculate actual sampling
rate, current time is periodically queried and processed along with
actual sampling ticks count.
Review URL: http://codereview.chromium.org/1539038
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4427 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This is to make possible enabling usage of the new profiling subsystem
in Chromium without much hassle. The idea is pretty simple: unless the
new profiling API is used, all works as usual, as soon as Chromium
starts to use the new API, it will work too.
Review URL: http://codereview.chromium.org/1635005
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4382 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The bkpt instruction is now supported by both the disassembler and the simulator. In the simulator it breaks to the native debugger if any like int3 on Intel.
Moved the handling of the miscellaneous instructions to a separate part.
Review URL: http://codereview.chromium.org/1576026
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4360 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
In browser (DevTools) mode, only non-native JS code and callbacks are reported.
Also, added "(garbage collector)" entry which accumulates samples count in GC state.
Trying to display "(compiler)" and "(external)" only brings confusion,
because it ends up in displaying scripts code under "(compiler)" node, and DOM
event handlers under "(external)" node, which looks weird.
Review URL: http://codereview.chromium.org/1523015
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4357 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
