This operator was initially designed to handle arbitrary effect merging
for effect relaxation, but we don't do that (at least currently). So no
need to keep the dead operator around.
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/1954983002
Cr-Commit-Position: refs/heads/master@{#36063}
This allows us to get rid of the "push TruncateFloat64ToInt32 into Phi"
trick that was used in the MachineOperatorReducer to combine the
ChangeTaggedToFloat64 and TruncateFloat64ToInt32 operations. Instead of
doing that later, we can just introduce the proper operator during the
representation selection directly.
Also separate the TruncateFloat64ToInt32 machine operator, which had two
different meanings depending on a flag (either JavaScript truncation or
C++ style round to zero). Now there's a TruncateFloat64ToWord32 which
represents the JavaScript truncation (implemented via TruncateDoubleToI
macro + code stub) and the RoundFloat64ToInt32, which implements the C++
round towards zero operation (in the same style as the other WebAssembly
driven Round* machine operators).
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1919513002
Cr-Commit-Position: refs/heads/master@{#35743}
Removes the register file machine register from the interpreter and
replaces it will loads from the parent frame pointer. As part of this
change the raw operand values for register values changes to enable the
interpreter to keep using the operand value as the offset from the
parent frame pointer.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1894063002
Cr-Commit-Position: refs/heads/master@{#35618}
Int64Mul is lowered to a new turbofan operator, Int32MulPair. The new
operator takes 4 inputs an generates 2 outputs. The inputs are the low
word of the left input, high word of the left input, the low word of the
right input, and high word of the right input. The ouputs are the low
and high word of the result of the multiplication.
R=titzer@chromium.org, v8-arm-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1807273002
Cr-Commit-Position: refs/heads/master@{#35131}
The CL also add guard nodes to places where we assume that certain
values are numbers.
Review URL: https://codereview.chromium.org/1821133002
Cr-Commit-Position: refs/heads/master@{#34977}
Int64Sub is lowered to a new turbofan operator, Int32SubPair. The new
operator takes 4 inputs an generates 2 outputs. The inputs are the low
word of the left input, high word of the left input, the low word of the
right input, and high word of the right input. The ouputs are the low
and high word of the result of the subtraction.
The implementation is very similar to the implementation of Int64Add.
@v8-arm-ports: please take a careful look at the implementation of sbc
in the simulator.
R=titzer@chromium.org, v8-arm-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1778893005
Cr-Commit-Position: refs/heads/master@{#34808}
Word64Popcnt is lowered to Word32Popcnt(low-word) + Word32Popcnt(high_word).
Since the optional Word64Popcnt operator does not exist on 32 bit platforms,
I introduced a new operator "Word64PopcntPlaceholder" which is generated
in the WasmCompiler and then lowered in the Int64Lowering.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1803453003
Cr-Commit-Position: refs/heads/master@{#34777}
Int64Add is lowered to a new turbofan operator, Int32AddPair. The new
operator takes 4 inputs an generates 2 outputs. The inputs are the low
word of the left input, high word of the left input, the low word of the
right input, and high word of the right input. The ouputs are the low
and high word of the result of the addition.
R=titzer@chromium.org, v8-arm-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1778493004
Cr-Commit-Position: refs/heads/master@{#34747}
I64Shl is lowered to a new turbofan operator, WasmWord64Shl. The new
operator takes 3 inputs, the low-word input, the high-word input, and
the shift, and produces 2 output, the low-word output and the high-word
output.
At the moment I implemented the lowering only for ia32, but I think the
CL is already big enough. I will add the other platforms in separate
CLs.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1756863002
Cr-Commit-Position: refs/heads/master@{#34546}
Avoid the hacking in JSIntrinsicLowering and provide a proper simplified
operator ObjectIsReceiver instead that is used to implement %_IsJSReceiver
which is used by our JavaScript builtins and the JSInliner.
R=jarin@chromium.org
BUG=v8:4544
LOG=n
Review URL: https://codereview.chromium.org/1657863004
Cr-Commit-Position: refs/heads/master@{#33675}
This CL removes the Config templatization from the types. It is not
necessary anymore, after the HeapTypes have been removed.
The CL also changes the type hierarchy - the specific type kinds are
not inner classes of the Type class and they do not inherit from Type.
This is partly because it seems impossible to make this work without
templates. Instead, a new TypeBase class is introduced and all the
structural (i.e., non-bitset) types inherit from it.
The bitset type still requires the bit-munging hack and some nasty
reinterpret-casts to pretend bitsets are of type Type*. Additionally,
there is now the same hack for TypeBase - all pointers to the sub-types
of TypeBase are reinterpret-casted to Type*. This is to keep the type
constructors in inline method definitions (although it is unclear how
much that actually buys us).
In future, we would like to move to a model where we encapsulate Type*
into a class (or possibly use Type where we used to use Type*). This
would loosen the coupling between bitset size and pointer size, and
eventually we would be able to have more bits.
TBR=bradnelson@chromium.org
Review URL: https://codereview.chromium.org/1655833002
Cr-Commit-Position: refs/heads/master@{#33656}
MachineType is now a class with two enum fields:
- MachineRepresentation
- MachineSemantic
Both enums are usable on their own, and this change switches some places from using MachineType to use just MachineRepresentation. Most notably:
- register allocator now uses just the representation.
- Phi and Select nodes only refer to representations.
Review URL: https://codereview.chromium.org/1513543003
Cr-Commit-Position: refs/heads/master@{#32738}
Removing bytecode graph builder tests as they are high maintenance and
have limited use, ie they track changes in the implementation rather
than behaviour.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1477783003
Cr-Commit-Position: refs/heads/master@{#32333}
Adds code and tests to support CreateClosure bytecode when building
graphs.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1458603012
Cr-Commit-Position: refs/heads/master@{#32224}
Adds support for the New, CallRuntime and CallJSRuntime bytecodes in
BytecodeGraphBuilder. Also adds BuildLoadObjectField,
BuildLoadGlobalObject and BuildLoadNativeContextField helpers.
Landed on behalf of rmcilroy.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1456483002
Cr-Commit-Position: refs/heads/master@{#32136}
Adds support for the LdaGlobal and StaGlobal bytecodes to the
BytecodeGraphBuilder. Also fixes a bug in the context node's parameter
index and start node inputs.
Landed on behalf of rmcilroy.
TBR=bmeuer@chromium.org,mythria@chromium.org
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1449373002
Cr-Commit-Position: refs/heads/master@{#32049}
Adds support for visiting the Call bytecode to the bytecode graph builder.
This change also adds the call type feedback slot to the Call bytecode.
This is not currently used by the interpreter, but is used by the
graph builder.
Also adds a CallWide varient of the Call bytecode, and adds the kCount16
operand type.
Landed on behalf of rmcilroy.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1456453002
Cr-Commit-Position: refs/heads/master@{#32033}
Adds implementation and tests for following operators in bytecode graph builder:
-VisitLoadICSloppy
-VisitLoadICStrict
-VisitLoadICSloppyWide
-VisitLoadICStrictWide
The current implementation introduces empty frame states for frame state inputs expected by these operations.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1419373007
Cr-Commit-Position: refs/heads/master@{#32026}
This CL re-purposes ValueEffect and Finish as delimiters for regions
that are scheduled atomically (renamed to BeginRegion, FinishRegion).
The BeginRegion node takes and produces an effect. For the uses that do
not care about the placement in the effect chain, it is ok to feed
graph->start() as an effect input.
The FinishRegion takes a value and an effect and produces a value and
an effect. It is important that any value or effect produced inside the
region is not used outside the region. The FinishRegion node is the only
way to smuggle an effect and a value out.
At the moment, this does not support control flow inside the region. Control flow would be hard.
During scheduling we do some sanity check, but the checks are not exhaustive. Here is what we check:
- the effect chain between begin and finish is linear (no splitting,
single effect input and output).
- any value produced is consumed by the FinishRegion node.
- no control flow outputs.
Review URL: https://codereview.chromium.org/1399423002
Cr-Commit-Position: refs/heads/master@{#31265}
Adds support for short operands, starting with kIdx16. Introduces
BytecodeTraits to enable compile time determination of various traits for a
bytecode, such as size, operands, etc. Reworks BytecodeIterator,
BytecodeArrayBuilder and Bytecodes::Decode to support 16 bit operands. Adds
support to Interpreter to load 16 bit operands.
Also fixes a bug with ToBoolean where it wouldn't get emitted at the start
of a block, and added a test.
BytecodeTraits template magic inspired by oth@chromium.org.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1370893002
Cr-Commit-Position: refs/heads/master@{#31058}
Similar to DELETE, the IN builtin is just a thin wrapper for %HasElement
and %HasProperty anyway, and cannot be optimized, plus it had a weird
special fast case (which also involved at least one LOAD_IC plus some
intrinsic magic).
R=yangguo@chromium.org,jarin@chromium.org
CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_win_nosnap_shared_rel
Committed: https://crrev.com/72d60a1e80e81e2e68ca402665e2acbc46c5e471
Cr-Commit-Position: refs/heads/master@{#30154}
Review URL: https://codereview.chromium.org/1295433002
Cr-Commit-Position: refs/heads/master@{#30582}
The usage of Unique<T> throughout the TurboFan IR does not have any
advantage. There is no single point in time when they are initialized
and most use-sites looked through to the underlying Handle<T> anyways.
Also there already was a mixture of Handle<T> versus Unique<T> in the
graph and this unifies the situation to use Handle<T> everywhere.
R=bmeurer@chromium.org,titzer@chromium.org
Review URL: https://codereview.chromium.org/1314473007
Cr-Commit-Position: refs/heads/master@{#30458}
Adds implementations and tests for the following bytecodes:
- Add
- Sub
- Mul
- Div
- Mod
Also adds the Mod bytecode and adds support to BytecodeGenerator and
BytecodeArrayBuilder to enable it's use.
The current bytecodes always call through to the JS builtins. This also adds
LoadObjectField and CallJSBuiltin operators to the InterpreterAssembler.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1300813005
Cr-Commit-Position: refs/heads/master@{#30352}
Passes the current context to bytecode interpreter handlers. This is held in the
context register on all architectures except for ia32 where there are too few
registers and it is instead spilled to the stack.
Also changes Load/StoreRegister to use kMachAnyTagged representation since they
should only ever hold tagged values.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1294133004
Cr-Commit-Position: refs/heads/master@{#30325}
Makes the following modifications to the interpreter builtins and
InterpreterAssembler:
- Adds an accumulator register and initializes it to undefined()
- Adds a register file pointer register and use it instead of FramePointer to
access registers
- Modifies builtin to support functions with 0 regiters in the register file
- Modifies builtin to Call rather than TailCall to first bytecode handler.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1289863003
Cr-Commit-Position: refs/heads/master@{#30219}
Adds interpreter entry and exit trampoline builtins. Also implements the
Return bytecode handler and fixes a few bugs in InterpreterAssembler
highlighted by running on other architectures.
MIPS and MIPS64 port contributed by Paul Lind (paul.lind@imgtec.com)
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1245133002
Cr-Commit-Position: refs/heads/master@{#29929}
Changes the interpreter to use a BytecodeArray pointer and an offset to avoid
having an inner pointer to a BytecodeArray object in registers during dispatch.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1254293006
Cr-Commit-Position: refs/heads/master@{#29910}
Adds basic support for generation of interpreter bytecode handler code
snippets. The InterpreterAssembler class exposes a set of low level,
interpreter specific operations which can be used to build a Turbofan
graph. The Interpreter class generates a bytecode handler snippet for
each bytecode by assembling operations using an InterpreterAssembler.
Currently only two simple bytecodes are supported: LoadLiteral0 and Return.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1239793002
Cr-Commit-Position: refs/heads/master@{#29814}
Reduce Float64 comparison to Float32 when both inputs are conversions from
Float32.
Review URL: https://codereview.chromium.org/1235663002
Cr-Commit-Position: refs/heads/master@{#29586}
Currently we lower shifts directly to machine operators, and add an
appropriate Word32And to implement the & 0x1F operation on the right
hand side required by the specification. However for Word32And we assume
Int32 in simplified lowering, which is basically changes the right hand
side bit interpretation for the shifts from Uint32 to Int32, which is
obviously wrong. So now we represent that explicitly by proper
simplified operators for the shifts, which are lowered to machine in
simplified lowering.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1213803008
Cr-Commit-Position: refs/heads/master@{#29465}
This will enable tail call optimization even across inlining. Plus it
might enable some other interesting optimizations as well. In order to
avoid blowing up the generated code, we can still canonicalize the
epilogue in the CodeGenerator, similar to what fullcodegen does.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1215623002
Cr-Commit-Position: refs/heads/master@{#29311}
The three different concerns that the ControlReducer used to deal with
are now properly separated into
a.) DeadCodeElimination, which is a regular AdvancedReducer, that
propagates Dead via control edges,
b.) CommonOperatorReducer, which does strength reduction on common
operators (i.e. Branch, Phi, and friends), and
c.) GraphTrimming, which removes dead->live edges from the graph.
This will make it possible to run the DeadCodeElimination together with
other passes that actually introduce Dead nodes, i.e. typed lowering;
and it opens the door for general inlining without two stage fix point
iteration.
To make the DeadCodeElimination easier and more uniform, we basically
reverted the introduction of DeadValue and DeadEffect, and changed the
Dead operator to produce control, value and effect. Note however that
this is not a requirement, but merely a way to make dead propagation
easier and more uniform. We could always go back and decide to have
different Dead operators if some other change requires that.
Note that there are several additional opportunities for cleanup now,
i.e. OSR deconstruction could be a regular reducer now, and we don't
need to use TheHole as dead value marker in the GraphReducer. And we can
actually run the dead code elimination together with the other passes
instead of using separate passes over the graph. We will do this in
follow up CLs.
R=jarin@chromium.org, mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1193833002
Cr-Commit-Position: refs/heads/master@{#29146}
This adds handling of JSLoadDynamicGlobal nodes to JSTypedLowering to
perform extension checks and an inline fast path. The fast path is a
global variable load from the global object.
R=bmeurer@chromium.org
BUG=v8:4131
LOG=N
Review URL: https://codereview.chromium.org/1150723005
Cr-Commit-Position: refs/heads/master@{#28750}
If both inputs to JSStrictEqual/JSStrictNotEqual are unique values (i.e.
values with a canonical representation), we can lower the comparison to
ReferenceEqual instead of StringEqual or CompareIC.
Review URL: https://codereview.chromium.org/1154303002
Cr-Commit-Position: refs/heads/master@{#28646}
