This CL has two parts: the first is the logic itself, whereby each observer callback is assigned
a "priority" number the first time it's passed as an observer to Object.observe(), and that
priority is used to determine the order of delivery.
The second part invokes the above logic as part of the API, when the JS stack winds down to
zero.
Added several tests via the API, as the delivery logic isn't testable from a JS test
(it runs after such a test would exit).
Review URL: https://codereview.chromium.org/11266011
Patch from Adam Klein <adamk@chromium.org>.
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@12902 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
the speed of deserializing code. The current startup
time improvement for V8 is around 6%, but code deserialization
is speeded up disproportionately, and we will soon have more
code in the snapshot.
* Removed support for deserializing into large object space.
The regular pages are 1Mbyte now and that is plenty. This
is a big simplification.
* Instead of reserving space for the snapshot we actually
allocate it now. This removes some special casing from
the memory management and simplifies deserialization since
we are just bumping a pointer rather than calling the
normal allocation routines during deserialization.
* Record in the snapshot how much we need to boot up and
allocate it instead of just assuming that allocations in
a new VM will always be linear.
* In the snapshot we always address an object as a negative
offset from the current allocation point. We used to
sometimes address from the start of the deserialized data,
but this is less useful now that we have good support for
roots and repetitions in the deserialization data.
* Code objects were previously deserialized (like other
objects) by alternating raw data (deserialized with memcpy)
and pointers (to external references, other objects, etc.).
Now we deserialize code objects with a single memcpy,
followed by a series of skips and pointers that partially
overwrite the code we memcopied out of the snapshot.
The skips are sometimes merged into the following
instruction in the deserialization data to reduce dispatch
time.
* Integers in the snapshot were stored in a variable length
format that gives a compact representation for small positive
integers. This is still the case, but the new encoding can
be decoded without branches or conditional instructions,
which is faster on a modern CPU.
Review URL: https://chromiumcodereview.appspot.com/10918067
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@12505 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
- The global object has a reference to the current global scope chain.
Running a script adds to the chain if it contains global lexical declarations.
- Scripts are executed relative to a global, not a native context.
- Harmony let and const bindings are allocated to the innermost global context;
var and function still live on the global object.
(Lexical bindings are not reflected on the global object at all,
but that will probably change later using accessors, as for modules.)
- Compilation of scripts now needs a (global) context (previously only eval did).
- The global scope chain represents one logical scope, so collision tests take
the chain into account.
R=svenpanne@chromium.org
BUG=
Review URL: https://chromiumcodereview.appspot.com/10872084
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@12398 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
in anticipation of the upcoming lexical global scope.
Mostly automatised as:
for FILE in `egrep -ril "global[ _]?context" src test/cctest`
do
echo $FILE
sed "s/Global context/Native context/g" <$FILE >$FILE.0
sed "s/global context/native context/g" <$FILE.0 >$FILE.1
sed "s/global_context/native_context/g" <$FILE.1 >$FILE.2
sed "s/GLOBAL_CONTEXT/NATIVE_CONTEXT/g" <$FILE.2 >$FILE.3
sed "s/GlobalContext/NativeContext/g" <$FILE.3 >$FILE
rm $FILE.[0-9]
done
R=mstarzinger@chromium.org
BUG=
TEST=
Review URL: https://chromiumcodereview.appspot.com/10832342
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@12325 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The CompilationInfo record now saves a Zone, and the compiler pipeline
allocates memory from the Zone in the CompilationInfo. Before
compiling a function, we create a Zone on the stack and save a pointer
to that Zone to the CompilationInfo; which then gets picked up and
allocated from.
BUG=
TEST=
Review URL: https://chromiumcodereview.appspot.com/10534139
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@11877 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
with more JS code that is loaded into the VM before writing the snapshot. Get
rid of the hard coded limit on the partial snapshot cache size. This change
disables most of the serializer tests for the snapshot build of the VM: It's
getting too complicated to support both booting from a snapshot and then
creating a new snapshot from the same VM or loading more code with another
snapshot in the same VM.
Review URL: http://codereview.chromium.org/10574013
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@11871 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This CL:
- Adds a new trait parameter to LazyInstance to let it initialize the instance
without paying the cost of atomic operations (which are expensive on Mac).
This only works for users who don't care about thread-safety and this is now
the default initialization trait used by LazyInstance in v8.
- Reverts the changes that were made in r11010 in isolate.{cc,h}. That lets
Isolate's accessors be as cheap as they were before (but adds one static initializer).
- Adds OS::PostSetup() used to initialize the math functions which depend on CPU features.
That lets the math functions get rid of CallOnce().
BUG=118686
Review URL: https://chromiumcodereview.appspot.com/9873023
Patch from Philippe Liard <pliard@chromium.org>.
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@11198 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This change includes two CLs by pliard@chromium.org:
1. http://codereview.chromium.org/9447052/ (Add CallOnce() and simple LazyInstance implementation):
Note that this implementation of LazyInstance does not handle global destructors (i.e. the lazy instances are never deleted).
This CL was initially reviewed on codereview.appspot.com:
http://codereview.appspot.com/5687064/
2. http://codereview.chromium.org/9455088/ (Remove static initializers in v8):
This CL depends on CL 9447052 (adding CallOnce and LazyInstance).
It is based on a patch sent by Digit.
With this patch applied, we have only one static initializer left (in atomicops_internals_x86_gcc.cc). This static initializer populates a structure used by x86 atomic operations. It seems that we can hardly remove it. If possible, it will be removed in a next CL.
This CL also modifies the presubmit script to check the number of static initializers.
BUG=v8:1859
Review URL: https://chromiumcodereview.appspot.com/9666052
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@11010 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The old HashMap class had an explicit member to determine the allocation
policy. The template version matches the approach used already for
lists.
Cleanup some include dependencies and unnecessary forward declarations.
Cleanup some dead code from isolate.h and replace some HEAP macros
with GetHeap().
Review URL: https://chromiumcodereview.appspot.com/9372106
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10806 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The preprocessor defines ENABLE_LOGGING_AND_PROFILING and ENABLE_VMSTATE_TRACKING has been removed as these where required to be turned on for Crankshaft to work. To re-enable reducing the binary size by leaving out heap and CPU profiler a new set of defines needs to be created.
R=ager@chromium.org
BUG=v8:1271
TEST=all
Review URL: http://codereview.chromium.org//7350014
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@8622 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
o The thread local state in an isolate has to be initialized before
it's used.
o v8::Locker was incorrectly tracking whether it's the topmost one.
o Waking the profiler thread on shutdown should not leave the
semaphore counter in an inconsitent state.
R=fschneider@chromium.org
BUG=v8:1522
TEST=cctest/test-lockers/Regress1433
Review URL: http://codereview.chromium.org/7309013
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@8537 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Lots of web pages have really frequently firing timers that keep the
profiler thread spinning if we require a period of JS inactivity
before suspending the profiler. While it's possible to throttle it by
increasing the sleep delay and adjusting the duration of the required
inactive period, it seemed much simpler to just stop it immediately on
exiting JS.
Stopping the profiler this way effectively turned off two optimization
heuristics: 1) eager optimization (it's reset on waking up the
profiler and now the profiler wakes up much more frequently) and 2)
optimization throttling based on JS to non-JS state ratio (the ratio
is now 100%). I removed these two heuristics and found no performance
regressions so far.
R=ager@chromium.org
BUG=crbug.com/77625
TEST=none
Review URL: http://codereview.chromium.org/7274024
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@8472 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Thread class was receiving an isolate parameter by default.
This approact violates the assumption that only VM threads
can have an associated isolate, and can lead to troubles,
because accessing the same isolate from different threads
leads to race conditions.
This was found by investigating mysterious failures of the
CPU profiler layout test on Linux Chromium. As almost all
threads were associated with some isolate, the sampler was
trying to sample them.
As a side effect, we have also fixed the DebuggerAgent test.
Thanks to Vitaly for help in fixing isolates handling!
R=vitalyr@chromium.org
BUG=none
TEST=none
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@8259 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The ScannerConstants class was originally static fields on the scanner class.
During creation of the stand-alone preparser and later isolates, it has been
moved into a separate class with a per-isolate instance.
It is used to hold caching unicode Predicate values.
This change renames the class to UnicodeCache, and passes a reference
to the instance down to methods that doesn't have an easy access to
an isolate (to avoid, e.g., having to do an Isolate::Current() for every
number parsed).
Review URL: http://codereview.chromium.org/6824071
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@7584 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Patch by Dmitry Lomov.
pthreads implementations are free to reuse pthread_t (thread id) after
the thread has died. This change gets rid of ThreadHandle class and
replaces it with v8-managed thread identifiers.
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@7575 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Correctly process failures which can be returned by Object::GetProperty
when performing GetRealNamedProperty* queries.
Callback properties can produce exceptions so we need to wrap access to them
into exception checks. However, despite of many other methods with exception
checks, property access doesn't mandatroy go via JavaScript and hence we
need to inject code to propagate exception to public API TryCatch handlers.
Review URL: http://codereview.chromium.org/6685087
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@7548 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
While trying to fix Mac and Windows versions for this change:
http://codereview.chromium.org/6771047/, I figured out, that we
already store an isolate in StackFrameIterator, so we can use it in
frame objects, instead of requiring it from caller.
I've changed iterators usage to the following scheme: whenever a
caller maintains an isolate pointer, it just passes it to stack
iterator, and no more worries about passing it to frame content
accessors. If a caller uses current isolate, it can omit passing it
to iterator, in this case, an iterator will use the current isolate,
too.
There was a special case with LiveEdit, which creates
detached copies of frame objects.
R=vitalyr@chromium.org
BUG=none
TEST=none
Review URL: http://codereview.chromium.org/6794019
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@7499 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
It should now be possible to build the preparser using 'scons preparser' in both release and debug modes.
Remove v8.h include from scanner-base.h and other files.
Remove NativeAllocationChecker and all of its kind.
Moved Isolate::PreallocatedStorage* to isolate.cc
Review URL: http://codereview.chromium.org/6749029
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@7413 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This commit adds current working versions of assembler, macro-assembler,
disassembler, and simulator.
All other mips arch files are replaced with stubbed-out versions that
will build.
Arch independent files are updated as needed to support building and
running mips.
The only test is cctest/test-assembler-mips, and this passes on the
simulator and on mips hardware.
TEST=none
BUG=none
Patch by Paul Lind from MIPS.
Review URL: http://codereview.chromium.org/6730029/
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@7388 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This patch adds common infrastructure for fast TLS support and
implementation on win32. More implementations will be added soon.
Fast TLS is controlled by V8_FAST_TLS define which is enabled by
default in our gyp and scons builds. The scons build has
fasttls={on,off} option so that we can see the effects of slow TLS
when needed.
Review URL: http://codereview.chromium.org/6696112
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@7375 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
