Up until now we sometimes pass Smi 0 around as closure and expect the
runtime to translate that appropriately. But we need to be careful in
some places to not confuse the Smi 0 with a real closure. However, we
could instead just pass the correct closure extracted from the native
context.
This addresses three long-standing TODOs in the JSTypedLowering pass.
Drive-by-fix: Further unify error message reporting for ToObject (we had
a special message in case of ToObject error in with context creation).
R=yangguo@chromium.org
Review URL: https://codereview.chromium.org/1475383002
Cr-Commit-Position: refs/heads/master@{#32336}
Removing bytecode graph builder tests as they are high maintenance and
have limited use, ie they track changes in the implementation rather
than behaviour.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1477783003
Cr-Commit-Position: refs/heads/master@{#32333}
This removes an optimization in the static JSFunction visitor that
eagerly marked through to the SharedFunctionInfo for code flushing
candidates. This causes all processing in VisitJSFunction to be
side-stepped and hence might cause leaks.
R=hpayer@chromium.org
Review URL: https://codereview.chromium.org/1476223002
Cr-Commit-Position: refs/heads/master@{#32332}
For a * b with only truncated word32 uses (or result known to be in
signed32 range), we can use Int32Mul if we know for sure that the
intermediate result is inside the safe integer range, and a and b are
in signed32 range.
Drive-by-fix: Also use TypeCache in SimplifiedLowering.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1478953002
Cr-Commit-Position: refs/heads/master@{#32330}
Newer perf.data contains both MMAP and MMAP2 record type,
but MMAP2 record type is not supported in previous ll_prof,
MMAP2 record information will be lost.
BUG=v8:4569
LOG=n
Review URL: https://codereview.chromium.org/1469153004
Cr-Commit-Position: refs/heads/master@{#32319}
This CL also removes JSTypedArray and JSDataView static visitor Ids because the visiting logic is the same as for ordinary JSObject.
BUG=v8:4531
LOG=Y
Review URL: https://codereview.chromium.org/1476753003
Cr-Commit-Position: refs/heads/master@{#32317}
Reason for revert:
Unexpected error occurred.
Original issue's description:
> [turbofan] Implemented the TruncateFloat32ToInt64 TurboFan operator.
>
> The TruncateFloat32ToInt64 operator converts a float32 to an int64 using
> the round-to-zero rounding mode (truncate). If the input value is
> outside the int64 range, then the result depends on the architecture. I
> implemented the operator on x64, arm64, and mips64.
>
> R=titzer@chromium.org, jacob.bramley@arm.com
>
> Committed: https://crrev.com/1df1066c3c77464d2a68d7c8d501a5a0f3ad195a
> Cr-Commit-Position: refs/heads/master@{#32315}
TBR=jacob.bramley@arm.com,titzer@chromium.org,v8-mips-ports@googlegroups.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1475343002
Cr-Commit-Position: refs/heads/master@{#32316}
The TruncateFloat32ToInt64 operator converts a float32 to an int64 using
the round-to-zero rounding mode (truncate). If the input value is
outside the int64 range, then the result depends on the architecture. I
implemented the operator on x64, arm64, and mips64.
R=titzer@chromium.org, jacob.bramley@arm.com
Review URL: https://codereview.chromium.org/1476063002
Cr-Commit-Position: refs/heads/master@{#32315}
Reason for revert:
This is also unsound for the reasons outlined in
https://codereview.chromium.org/1473073004/
Will reland the mjsunit test separately and help Fedor to implement a solution based on simplified operators.
Original issue's description:
> [machine-operator-reducer] fix float truncation
>
> Don't replace `TruncateFloat64ToInt32(RoundInt64ToFloat64(value))` with
> `value`. Generally, `value` may have a range bigger than the one that
> could fit into Int32. Replace it with `TruncateInt64ToInt32(value)`
> instead, and only if the `value` fits into Float64 without precision
> loss.
>
> Add missing mjsunit test for 52bit multiplication/division optimization
> that has landed in refs/heads/master@{#31899}.
>
> BUG=
> R=titzer@google.com
>
> Committed: https://crrev.com/64efa2a904773816968992628f0bf0f1b7ae82be
> Cr-Commit-Position: refs/heads/master@{#32227}
TBR=titzer@chromium.org,fedor@indutny.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1468313009
Cr-Commit-Position: refs/heads/master@{#32312}
Reason for revert:
Unsound use of types in the MachineOperatorReducer. Will work on a sound solution with Fedor.
Original issue's description:
> [compiler] merge binary-operator-reducer
>
> Merge BinaryOperatorReducer into the MachineOperatorReducer class.
> It does not need `Revisit()` calls, because the newly inserted nodes are
> visited anyway, and there are no other methods that need AdvancedReducer
> there.
>
> BUG=
> R=titzer@chromium.org
>
> Committed: https://crrev.com/993ba9d2529a6401b3040b9263f8d06db7dbb4f1
> Cr-Commit-Position: refs/heads/master@{#32298}
TBR=titzer@chromium.org,fedor@indutny.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1476763006
Cr-Commit-Position: refs/heads/master@{#32310}
port 3d004eeab2 (r32264)
original commit message:
This passes the new.target value in a register instead of through a
side-channel via the construct stub. The interpreter entry trampoline
stores this value in a bytecode register so that it can be accessed
directly by the interpreter. The size of the interpreter stack frame
hence grows by one slot.
BUG=
Review URL: https://codereview.chromium.org/1475043003
Cr-Commit-Position: refs/heads/master@{#32309}
The Float32RoundTiesEven operator rounds float32 numbers towards the nearest
integer. If the distance to two integers is the same, then the result is
the even integer. This is the default rounding mode of the ieee 754 floating
point standard.
I implemented the optional Float32RoundTiesEven operator on x64, ia32, arm, and arm64.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1477753002
Cr-Commit-Position: refs/heads/master@{#32308}
This will make sure that message tests cover both the parser and preparser
paths, just as we do for parsing-related cctests.
BUG=v8:4372
LOG=n
Review URL: https://codereview.chromium.org/1469383004
Cr-Commit-Position: refs/heads/master@{#32307}
Also fix CheckConflictingVarDeclarations() to properly handle
legacy const bindings. Without that change enabling the flag
causes code like:
function f() { const x; var x; }
to throw an early error, rather than wait to throw the error
until f is invoked.
The previous patch ran into problems with the fuzzer; that crash was fixed
(with test coverage added) in https://crrev.com/ceb92ebfdfb561d71038793c02b42aa973f55ec4
BUG=v8:811
LOG=y
TBR=rossberg@chromium.org
CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.blink:linux_blink_rel
Review URL: https://codereview.chromium.org/1473243006
Cr-Commit-Position: refs/heads/master@{#32306}
This should fix the Turbofan Octane/Mandreel regression introduced by
commit 9ea551aa45
Author: jarin <jarin@chromium.org>
Date: Sun Nov 22 05:45:38 2015 -0800
[turbofan] Simplify lowering of number addition.
Review URL: https://codereview.chromium.org/1471533002
Cr-Commit-Position: refs/heads/master@{#32159}
Review URL: https://codereview.chromium.org/1477803002
Cr-Commit-Position: refs/heads/master@{#32304}
In this new version of test262, a number of known failing tests have
been changed to match the ES2016 semantics, which V8 implements.
R=adamk
Review URL: https://codereview.chromium.org/1475793004
Cr-Commit-Position: refs/heads/master@{#32303}
validating that the hot path does not spill - somewhat simpler code.
Cleared the scenario where a range is defined in a deferred block. The
code before was slightly more complicated by not leveraging the
property that these sort of ranges would be completely contained within
deferred blocks.
Moved "spills in deferred blocks" marking to a more appropriate
location.
One thing this CL achieves is correct support for scenarios where a
range is spilled both on the deferred and then hot path, and the ranges
concatenate. I owe better unit testing, which I will add in a subsequent
CL.
BUG=
Review URL: https://codereview.chromium.org/1472803004
Cr-Commit-Position: refs/heads/master@{#32302}
The Float32RoundTruncate operator rounds float32 numbers towards zero.
The operator is currently implemented on x64, ia32, arm, and arm64.
Additionally I added support for the float32 vrintz, vrintn, and vrinta
instructions to the arm simulator.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1468303005
Cr-Commit-Position: refs/heads/master@{#32301}
Merge BinaryOperatorReducer into the MachineOperatorReducer class.
It does not need `Revisit()` calls, because the newly inserted nodes are
visited anyway, and there are no other methods that need AdvancedReducer
there.
BUG=
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1473073004
Cr-Commit-Position: refs/heads/master@{#32298}
Since the gn builders do not resolve the DEPS after patch, the patch cannot contain
both the DEPS change as well the usage of the newly added DEPS.
If the CL mentioned in the title does not land, this CL is to be remove/reverted as well.
BUG=v8:4560
LOG=N
Review URL: https://codereview.chromium.org/1469303004
Cr-Commit-Position: refs/heads/master@{#32296}
Iterating live objects using mark bits is memory bound and already pretty heavy
on the cache as we always need to look at the mark bits, the objects (payload),
and their maps.
This CL changes the object start computation from a table lookup, which was yet
another memory location, to a CPU-bound computation.
BUG=chromium:524425
LOG=N
Review URL: https://codereview.chromium.org/1478623003
Cr-Commit-Position: refs/heads/master@{#32291}
This adds a new JavaScript level operator for regexp literal creation,
similar to what we already have for array and object literals. This
once gets lowered to a call to the FastCloneRegExpStub always.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1475973002
Cr-Commit-Position: refs/heads/master@{#32288}
