These new stubs perform exactly the same job as the string equality case
for the CompareIC, but are platform independent and usable outside of
fullcodegen and Crankshaft. We use them in the StrictEqualStub and the
StrictNotEqualStub instead of falling back to the runtime immediately
for String comparisons, and we also use them in TurboFan to perform
String equality or inequality comparisons.
These stubs currently handle only internalized and one byte strings w/o
going to C++, but it should be easy to add support for more string cases
later, i.e. utilizing already flattened cons strings or comparing two
byte strings as well.
Review URL: https://codereview.chromium.org/1761823002
Cr-Commit-Position: refs/heads/master@{#34459}
This relaxes the constraints of the optimized code map in order to be
able to update existing entries. It also simplifies the interface a
little bit. We can now insert an entry for a newly allocated literals
array together with previously cached context-independent code.
R=mvstanton@chromium.org
Review URL: https://codereview.chromium.org/1753213002
Cr-Commit-Position: refs/heads/master@{#34427}
The macro is currently used by AllocateHeapNumberStub and AllocateMutableHeapNumberStub, which are now turbofan code stubs.
It can be used to allocate objects in the new or old space, optionally with double alignment.
BUG=588692
LOG=y
Review URL: https://codereview.chromium.org/1735803003
Cr-Commit-Position: refs/heads/master@{#34424}
Add support to log source position offsets to the profiler. As part of
this change PositionsRecorder is split into two, with the subset needed
by log.cc moved into log.h and the remainder kept in assembler.h as
AssemblerPositionsRecorder. The interpreter's source position table
builder is updated to log positions when the profiler is active.
BUG=v8:4766
LOG=N
Review URL: https://codereview.chromium.org/1737043002
Cr-Commit-Position: refs/heads/master@{#34416}
In ia32 PushArgsAndConstruct builtin, we run out of registers and need to
temporarily store the data in the stack. In the earlier implementation,
a location outside the esp was used. This causes a problem if there is a
interrupt/signals which would use the same stack and corrupt the data that
is above the esp. This cl fixes it by pushing it onto the stack so that
the stack pointer is updated and hence the corruption will not happen. We
reuse the slot meant for receiver as a temporary store.
TBR=rmcilroy@chromium.org
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1750373002
Cr-Commit-Position: refs/heads/master@{#34397}
Adds the translation from optimized frame to bytecode offset
in FrameSummary. For interpreter, the bailout id represents the bytecode
array offset. So we can directly use the bailout id as the code offset
in the FrameSummary. Also updates mjsunit.status with more information
about failing tests.
BUG=v8:4280, v8:4689
LOG=N
Review URL: https://codereview.chromium.org/1740753002
Cr-Commit-Position: refs/heads/master@{#34393}
The preparser should ignore "use strong" if the --strong_mode flag
is not turned on, but this should not stop processing subsequent
directives.
R=rossberg@chromium.org
BUG=
LOG=N
Review URL: https://codereview.chromium.org/1752753002
Cr-Commit-Position: refs/heads/master@{#34392}
Similar to fullcodegen, Ignition now also marks a for-in statement as
slow (via the TypeFeedbackVector) when we have to call %ForInFilter,
i.e. we either have no enumeration cache or the receiver map changes
during an iteration of the for-in map.
R=mstarzinger@chromium.org
BUG=v8:3650
LOG=n
Review URL: https://codereview.chromium.org/1755563002
Cr-Commit-Position: refs/heads/master@{#34391}
We used to emit debug break location on block entry. This cannot be
ported to the interpreted as we do not emit bytecode for block entry.
This made no sense to begin with though, but accidentally added
break locations for var declarations.
With this change, the debugger no longer breaks at var declarations
without initialization. This is in accordance with the fact that the
interpreter does not emit bytecode for uninitialized var declarations.
Also fix the bytecode to match full-codegen's behavior wrt return
positions:
- there is a break location before the return statement, with the source
position of the return statement.
- right before the actual return, there is another break location. The
source position points to the end of the function.
R=rmcilroy@chromium.org, vogelheim@chromium.orgTBR=rossberg@chromium.org
BUG=v8:4690
LOG=N
Review URL: https://codereview.chromium.org/1744123003
Cr-Commit-Position: refs/heads/master@{#34388}
Runtime errors will be suppressed in --rebaseline mode, unless the
--verbose flag is passed.
The reasoning behind (rebaseline && !verbose) and not just (verbose)
is to suppress harmless noise while updating the expectation for
existing, known good snippets, without hiding actually relevant
errors when the tool is used to write new expectation files.
In fact, some tests are supposed to produce a runtime error, which
might nevertheless alarm a developer who is just --rebaseline'ing.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1742723003
Cr-Commit-Position: refs/heads/master@{#34385}
This gets rid of the JavaScript wrapper. That way we can more quickly handle non-JSReceivers and indexed properties; and don't need to optimize the JavaScript wrapper either.
BUG=
Review URL: https://codereview.chromium.org/1742283002
Cr-Commit-Position: refs/heads/master@{#34356}
This ensures that the generated code output will match the reference code output
and fixes some failures when running tests natively.
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1744493003
Cr-Commit-Position: refs/heads/master@{#34354}
Since both null and undefined are also marked as undetectable now, we
can just test that bit instead of having the CompareNilIC try to collect
feedback to speed up the general case (without the undetectable bit
being used).
Drive-by-fix: Update the type system to match the new handling of
undetectable in the runtime.
R=danno@chromium.org
Committed: https://crrev.com/666aec0348c8793e61c8633dee7ad29a514239ba
Cr-Commit-Position: refs/heads/master@{#34237}
Review URL: https://codereview.chromium.org/1722193002
Cr-Commit-Position: refs/heads/master@{#34344}
This patch adds the newly added support for contexts in V8 Tracing, as well
as use it to mark all the entry points for a V8 Isolate.
Update for reland: The current tracing interface needs to be updated (AddTraceEvent),
but the embedders need to migrate to the new version before removing the old version.
(Reland of: https://codereview.chromium.org/1686233002)
The revert happened because the 2 signatures of the old and new AddTraceEvent where different
so it threw an overload-virtual error on cross arm debug. This issue is temporary, and to solve
it, I added an implementation of the old and new everywhere until the embedder implements the new.
BUG=v8:4565
LOG=N
R=jochen@chromium.org
Review URL: https://codereview.chromium.org/1704253002
Cr-Commit-Position: refs/heads/master@{#34332}
When operating in --rebaseline mode, each of the files will be updated.
In --raw-js mode, all the expectations will be written to the same file.
In default mode no more than one input file is accepted.
On POSIX systems, --rebaseline will autodiscover golden files when run
from the project root and no input file is provided.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1737623002
Cr-Commit-Position: refs/heads/master@{#34324}
The LoadBuffer operator that is used for asm.js heap access claims to
return only the appropriate typed array type, but out of bounds access
could make it return undefined. So far we tried to "repair" the graph
later if we see that our assumption was wrong, and for various reasons
that worked for some time. But now that wrong type information that is
propagated earlier is picked up appropriately and thus we generate wrong
code, i.e. we in the repro case we feed NaN into ChangeFloat64Uint32 and
thus get 2147483648 instead of 0 (with proper JS truncation).
This was always considered a temporary hack until we have a proper
asm.js pipeline, but since we still run asm.js through the generic
JavaScript pipeline, we have to address this now. Quickfix is to just
bailout from the pipeline when we see that the LoadBuffer type was
wrong, i.e. the result of LoadBuffer is not properly truncated and thus
undefined or NaN would be observable.
R=mstarzinger@chromium.org, jarin@chromium.org
BUG=chromium:589792
LOG=y
Review URL: https://codereview.chromium.org/1740123002
Cr-Commit-Position: refs/heads/master@{#34322}
Adds support for cpu profiler logging to the interpreter. Modifies the
the API to be passed AbstractCode objects instead of Code objects, and
adds extra functions to AbstractCode which is required by log.cc and
cpu-profiler.cc.
The main change in sampler.cc is to determine if a stack frame is an
interpreter stack frame, and if so, use the bytecode address as the pc
for that frame. This allows sampling of bytecode functions. This
requires adding support to SafeStackIterator to determine if a frame is
interpreted, which we do by checking the PC against pre-stored addresses
for the start and end of interpreter entry builtins.
Also removes CodeDeleteEvents which are dead code and haven't
been reported for some time.
Still to do is tracking source positions which will be done in a
followup CL.
BUG=v8:4766
LOG=N
Review URL: https://codereview.chromium.org/1728593002
Cr-Commit-Position: refs/heads/master@{#34321}
We don't need to compare the result of ToObject against null, since
ToObject will always yield a proper receiver (or throw a TypeError).
R=rmcilroy@chromium.org
Review URL: https://codereview.chromium.org/1736233002
Cr-Commit-Position: refs/heads/master@{#34318}
Reason for revert:
Speculative revert in attempt to fix#2 crasher on canary.
Original issue's description:
> [compiler] Drop the CompareNilIC.
>
> Since both null and undefined are also marked as undetectable now, we
> can just test that bit instead of having the CompareNilIC try to collect
> feedback to speed up the general case (without the undetectable bit
> being used).
>
> Drive-by-fix: Update the type system to match the new handling of
> undetectable in the runtime.
>
> R=danno@chromium.org
>
> Committed: https://crrev.com/666aec0348c8793e61c8633dee7ad29a514239ba
> Cr-Commit-Position: refs/heads/master@{#34237}
TBR=danno@chromium.org,verwaest@chromium.org,bmeurer@chromium.org
LOG=y
BUG=chromium:589897
NOTRY=true
Review URL: https://codereview.chromium.org/1743433002
Cr-Commit-Position: refs/heads/master@{#34308}
This patch moves iterator finalization (calling .return() when a
for-of loop exits early) to shipping. The only part of this feature
which is currently known to be missing is destructuring--.return()
should be also be called when destructuring with an array which
does not end in a rest pattern, but it currently does not. The rest
of this feature, including calling .return() from certain builtins,
is implemented.
R=adamk
BUG=v8:3566
LOG=Y
Review URL: https://codereview.chromium.org/1738463003
Cr-Commit-Position: refs/heads/master@{#34307}
This calback is run after an attempt to run microtasks.
BUG=chromium:585949
LOG=Y
Review URL: https://codereview.chromium.org/1731773005
Cr-Commit-Position: refs/heads/master@{#34305}
This reverts commit 9146bc5e20.
This contains a fix for the following crash:
1. We record slots for a fixed array.
2. We trim the fixed array, so that some recorded slots are now in free space.
3. During mark-compact we sweep the page with the fixed array. Now free list items contain memory with recorded slots.
4. We evacuate a byte array using the new free list items.
5. We iterate slots that are now inside the byte array and crash.
BUG=chromium:589413,chromium:578883
LOG=NO
Review URL: https://codereview.chromium.org/1735523002
Cr-Commit-Position: refs/heads/master@{#34302}
It is possible for JS objects to be allocated while we are retrieving the
profile. These JS objects can in turn end up getting sampled by the profiler.
Adding these to the profile data structures invalidates the iterators that
are presently in flight. This change prevents such concurrent modifications
from affecting the retrieve operation.
BUG=
Review URL: https://codereview.chromium.org/1735733002
Cr-Commit-Position: refs/heads/master@{#34298}
This adds explicit setters for the SharedFunctionInfo::function_data
field. Such setters are safer because they allow for explicit checking
of which values are allowed, and they improve readability because the
intended semantics become clear for each call-site. Also fix a cctest
case along the way.
R=rmcilroy@chromium.org
Review URL: https://codereview.chromium.org/1730853005
Cr-Commit-Position: refs/heads/master@{#34297}
By now the deprecation of strong mode is far enough along that the
support present in the interpreter matches the support in the other
compilers. Special expectations aren't needed anymore.
R=rmcilroy@chromium.org
Review URL: https://codereview.chromium.org/1738653003
Cr-Commit-Position: refs/heads/master@{#34293}
Bytecode expectations have been moved to external (.golden) files,
one per test. Each test in the suite builds a representation of the
the compiled bytecode using BytecodeExpectationsPrinter. The output is
then compared to the golden file. If the comparision fails, a textual
diff can be used to identify the discrepancies.
Only the test snippets are left in the cc file, which also allows to
make it more compact and meaningful. Leaving the snippets in the cc
file was a deliberate choice to allow keeping the "truth" about the
tests in the cc file, which will rarely change, as opposed to golden
files.
Golden files can be generated and kept up to date using
generate-bytecode-expectations, which also means that the test suite
can be batch updated whenever the bytecode or golden format changes.
The golden format has been slightly amended (no more comments about
`void*`, add size of the bytecode array) following the consideration
made while converting the tests.
There is also a fix: BytecodeExpectationsPrinter::top_level_ was left
uninitialized, leading to undefined behaviour.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1717293002
Cr-Commit-Position: refs/heads/master@{#34285}
I turn the test off for now. The problem is that mips does not deal with
signalling NaNs as expected.
@v8-mips-ports: Could it be that the mips simulator deals differently
with signalling NaNs than the actual hardware? The implementation that
is tested in these tests assumes that sNaN * 1.0 = qNaN, where the bits
of sNaN and qNaN are equal except for the most significant mantissa bit.
This assumption holds for the simulator, but seems not to hold for actual
mips hardware. Do you know more about that?
R=mstarzinger@chromium.org, titzer@chromium.org, v8-mips-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1735673003
Cr-Commit-Position: refs/heads/master@{#34278}
Migrate Math.imul, Math.fround, Math.acos, Math.asin and Math.atan to
C++ builtins, as these ones call into C++ anyway and so there's no
need to have this extra wrapper around it.
R=yangguo@chromium.org
Review URL: https://codereview.chromium.org/1731543004
Cr-Commit-Position: refs/heads/master@{#34274}
Reason for revert:
It is not a good idea to call CallICStub from the builtin. It might be sensitive to the frame structure. Constructing a internal frame might cause problems. It is much better to inline the code related to the type feedback vector into the builtin.
Original issue's description:
> [Interpreter] Implements calls through CallICStub in the interpreter.
>
> Calls are implemented through CallICStub to collect type feedback. Adds
> a new builtin called InterpreterPushArgsAndCallIC that pushes the
> arguments onto stack and calls CallICStub.
>
> Also adds two new bytecodes CallIC and CallICWide to indicate calls have to
> go through CallICStub.
>
> MIPS port contributed by balazs.kilvady.
>
> BUG=v8:4280, v8:4680
> LOG=N
>
> Committed: https://crrev.com/20362a2214c11a0f2ea5141b6a79e09458939cec
> Cr-Commit-Position: refs/heads/master@{#34244}
TBR=rmcilroy@chromium.org,mvstanton@chromium.org,mstarzinger@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280, v8:4680
Review URL: https://codereview.chromium.org/1731253003
Cr-Commit-Position: refs/heads/master@{#34252}
Calls are implemented through CallICStub to collect type feedback. Adds
a new builtin called InterpreterPushArgsAndCallIC that pushes the
arguments onto stack and calls CallICStub.
Also adds two new bytecodes CallIC and CallICWide to indicate calls have to
go through CallICStub.
MIPS port contributed by balazs.kilvady.
BUG=v8:4280, v8:4680
LOG=N
Review URL: https://codereview.chromium.org/1688283003
Cr-Commit-Position: refs/heads/master@{#34244}
Reason for revert:
Revert because of canary crashes: crbug.com/589413
Original issue's description:
> Replace slots buffer with remembered set.
>
> Slots pointing to evacuation candidates are now recorded in the new RememberedSet<OLD_TO_OLD>.
>
> The remembered set is extended to support typed slots.
>
> During parallel evacuation all migration slots are recorded in local slots buffers.
> After evacuation all local slots are added to the remembered set.
>
> BUG=chromium:578883
> LOG=NO
>
> Committed: https://crrev.com/2285a99ef6f7d52f4f0c4d88a7db4224443ee152
> Cr-Commit-Position: refs/heads/master@{#34212}
TBR=jochen@chromium.org,hpayer@chromium.org,mlippautz@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:578883
Review URL: https://codereview.chromium.org/1725073003
Cr-Commit-Position: refs/heads/master@{#34238}
Since both null and undefined are also marked as undetectable now, we
can just test that bit instead of having the CompareNilIC try to collect
feedback to speed up the general case (without the undetectable bit
being used).
Drive-by-fix: Update the type system to match the new handling of
undetectable in the runtime.
R=danno@chromium.org
Review URL: https://codereview.chromium.org/1722193002
Cr-Commit-Position: refs/heads/master@{#34237}
Implements poisson unsampling. A poisson process is used to determine
which samples to collect based on a sample rate. Unsampling will
approximate the true number of allocations at each site taking into
account that smaller allocations are less likley to be sampled.
This work was originally being done in the agent that
consumes profiles but it is more efficient to do it here
and individual consumers of the API should not have to
worry about the mathematical details of the sampling
process.
R=ofrobots@google.com
BUG=
Review URL: https://codereview.chromium.org/1706343002
Cr-Commit-Position: refs/heads/master@{#34234}
The first operand to the CallRuntime class of bytecodes is the
ID of the runtime function being called. Before this commit
the ID was printed as plain uint16_t, now we get something like:
B(CallRuntime) U16(Runtime::Add) ...
This change is intended to make both the golden files more
resistant to modifications of the i::Runtime::FunctionId enum
and the output of generate-bytecode-expectations more readable.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1723223002
Cr-Commit-Position: refs/heads/master@{#34224}
Slots pointing to evacuation candidates are now recorded in the new RememberedSet<OLD_TO_OLD>.
The remembered set is extended to support typed slots.
During parallel evacuation all migration slots are recorded in local slots buffers.
After evacuation all local slots are added to the remembered set.
BUG=chromium:578883
LOG=NO
Review URL: https://codereview.chromium.org/1703823002
Cr-Commit-Position: refs/heads/master@{#34212}
When assigning to an integer view of the heap an intish
value does not need to be collapsed with |0.
Similarly a floatish value does not need to be collapsed with
fround when assigned to a float view of the heap.
i32[0] = i32_1 + i32_2; // ok
f32[0] = f32_1 + f32_2; // ok
However, floatish values cannot be safely assigned to double
arrays.
f64[0] = f32_1 + f32_2; // not ok
BUG= https://code.google.com/p/v8/issues/detail?id=4203
TEST=mjsunit/asm-wasm,test-asm-validator
R=aseemgarg@chromium.org,titzer@chromium.org
LOG=N
Review URL: https://codereview.chromium.org/1722473002
Cr-Commit-Position: refs/heads/master@{#34206}
The CL #33796 (https://codereview.chromium.org/1628133002) added the RunRoundUint32ToFloat32 test case and X87 failed at it.
The reason is same as the CL #33630 (Issue 1649323002: X87: Change the test case for X87 RunRoundInt32ToFloat32), please refer: https://codereview.chromium.org/1649323002.
Here is the key comments from CL #33630:
Some new test cases use CheckFloatEq(...) and CheckDoubleEq(...) function for result check. When GCC compiling the CheckFloatEq() and CheckDoubleEq() function,
those inlined functions has different behavior comparing with GCC ia32 build and x87 build.
The major difference is sse float register still has single precision rounding semantic. While X87 register has no such rounding precsion semantic when directly use register value.
The V8 turbofan JITTed has exactly same result in both X87 and IA32 port.
For CHECK_EQ(a, b) function, if a and b are doubles, it will has similar behaviors like CheckFloatEq(...) and CheckDoubleEq(...) function when compiled by GCC and causes the test case
fail.
So we add the following sentence to do type case to keep the same precision for RunRoundUint32ToFloat32. Such as: volatile double expect = static_cast<float>(*i).
BUG=
Review URL: https://codereview.chromium.org/1714413002
Cr-Commit-Position: refs/heads/master@{#34202}
This new callback is similar to CallCompletedCallback, but is executed before the call has been made.
Added Isolate* parameter to CallCompletedCallback, marking previous one as deprecated.
BUG=chromium:585949
LOG=Y
Review URL: https://codereview.chromium.org/1689863002
Cr-Commit-Position: refs/heads/master@{#34167}
--pool-type=int and double have now been merged into number.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1717633002
Cr-Commit-Position: refs/heads/master@{#34164}
FLAG_legacy_const and FLAG_harmony_do_expressions can now be toggled
both through the command line and through the option header.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1716793002
Cr-Commit-Position: refs/heads/master@{#34160}
This CL introduces an import section that names functions to be imported
as well as a CallImport bytecode to call imports from this table.
R=binji@chromium.org,bradnelson@chromium.org
LOG=Y
BUG=chromium:575167
Review URL: https://codereview.chromium.org/1709653002
Cr-Commit-Position: refs/heads/master@{#34157}
A few options and features have been added to the tool:
* an output file might be specified using --output=file.name
* a shortcut when the output file is also the input, which is handy
when fixing golden files, --rebaseline.
* the input snippet might be optionally not wrapped in a top function,
or not executed after compilation (--no-wrap and --no-execute).
* the name of the wrapper can be configured using --wrapper-name=foo
The same options can be configured via setters on the usual
BytecodeExpectationsPrinter.
The output file now includes all the relevant flags to reproduce it
when running again through the tool (usually with --rebaseline).
In particular, when running in --rebaseline mode, options from the
file header will override options specified in the command line.
A couple of other fixes and improvements:
* description of the handlers is now emitted (closing the TODO).
* the snippet is now correctly unquoted when double quotes are used.
* special registers (closure, context etc.) are now emitted as such,
instead of displaying their numeric value.
* the tool can now process top level code as well.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1698403002
Cr-Commit-Position: refs/heads/master@{#34152}
Reason for revert:
Tanks benchmarks (e.g., Octane box2d TF).
Original issue's description:
> [turbofan] Connect ObjectIsNumber to effect and control chains.
>
> In theory, we could connect the nodes when doing
> the schedule-in-the-middle pass, but that would require creating two
> versions of the operator (effectful and pure). I believe we do not
> lose anything by wiring the node up eagerly.
>
> Committed: https://crrev.com/2894e80a0a4a51a0d72e72aa48fcd01968f7949f
> Cr-Commit-Position: refs/heads/master@{#34141}
TBR=bmeurer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1718483002
Cr-Commit-Position: refs/heads/master@{#34147}
In theory, we could connect the nodes when doing
the schedule-in-the-middle pass, but that would require creating two
versions of the operator (effectful and pure). I believe we do not
lose anything by wiring the node up eagerly.
Review URL: https://codereview.chromium.org/1709093002
Cr-Commit-Position: refs/heads/master@{#34141}
This frees up one bit in FunctionKind, which I plan to make slightly
more syntactic info about functions available in SharedFunctionInfo
(needed for ES2015 Function.name support).
BUG=v8:3956, v8:4760
LOG=n
Review URL: https://codereview.chromium.org/1704223002
Cr-Commit-Position: refs/heads/master@{#34125}
This cleans up and makes the tests easier to write and understand.
Also prepares for adding the WASM interpreter which needs a
different initialization sequence in tests.
R=ahaas@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1707403002
Cr-Commit-Position: refs/heads/master@{#34123}
I extended the Int64Lowering to lower calls, loads, stores, returns, and
parameters and apply the lowering on both the test function TF graph and
the WasmRunner TF graph.
The lowering of calls also requires an adjustment of the call descriptor.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1704033002
Cr-Commit-Position: refs/heads/master@{#34121}
Implements iterator finalisation by desugaring for-of loops with an additional try-finally wrapper. See comment in parser.cc for details.
Also improved some AST printing facilities while there.
@Ross, I had to disable the bytecode generation test for for-of, because it got completely out of hand after this change (the new bytecode has 150+ lines). See the TODO that I assigned to you.
Patch set 1 is WIP patch by Georg (http://crrev.com/1695583003), patch set 2 relative changes.
@Georg, FYI, I changed the following:
- Moved try-finally out of the loop body, for performance, and in order to be able to handle `continue` correctly.
- Fixed scope management in ParseForStatement, which was the cause for the variable allocation failure.
- Fixed pre-existing zone initialisation bug in rewriter, which caused the crashes.
- Enabled all tests, adjusted a few others, added a couple more.
BUG=v8:2214
LOG=Y
Review URL: https://codereview.chromium.org/1695393003
Cr-Commit-Position: refs/heads/master@{#34111}
The BufferedRawMachineAssemblerTester caused problems for the
Int64Lowering. Instead we construct a TF graph now which is compiled by
Pipeline::GenerateCodeForTesting.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1702023002
Cr-Commit-Position: refs/heads/master@{#34107}
This is not currently implemented in the simulator, just the assembler and
disassembler.
BUG=v8:4614
LOG=y
Review URL: https://codereview.chromium.org/1699173003
Cr-Commit-Position: refs/heads/master@{#34093}
This patch adds the newly added support for contexts in V8 Tracing, as well
as use it to mark all the entry points for a V8 Isolate.
BUG=v8:4565
LOG=N
Review URL: https://codereview.chromium.org/1686233002
Cr-Commit-Position: refs/heads/master@{#34092}
This CL introduces two new bytecodes TailCall and TailCallWide.
BUG=v8:4698,v8:4687
LOG=N
Review URL: https://codereview.chromium.org/1698273003
Cr-Commit-Position: refs/heads/master@{#34083}
If sweeping is in progress then we need to filter out slots in free space after
array trimming, because the sweeper will add the free space into free list.
This CL also fixes a bug in SlotSet::RemoveRange.
BUG=chromium:587004
LOG=NO
TBR=hpayer@chromium.org
Review URL: https://codereview.chromium.org/1701963003
Cr-Commit-Position: refs/heads/master@{#34071}
Removes some cctest and mjsunit test skips on Ignition for tests that now pass.
BUG=v8:4680
LOG=N
Review URL: https://codereview.chromium.org/1703563002
Cr-Commit-Position: refs/heads/master@{#34045}
This CL splits up some long-running bytecode graph builder tests.
There's a lot of working going on here that probably should be split
up into smaller tests and/or mjsunit tests once we have the full
ignition pipeline. This one just targets the top offenders for now.
R=rmcilroy@chromium.org, oth@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1699113002
Cr-Commit-Position: refs/heads/master@{#34039}
Drive-by-fix: Remove the (now) unused %_SetValueOf and %_JSValueGetValue
intrinsics from the various compilers and the runtime.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1698343002
Cr-Commit-Position: refs/heads/master@{#34037}
Fixes a bug in Ignition on Arm64 where lr gets trashed in StaContextSlot
which causes the stack walker to get confused and crash.
BUG=v8:4680
LOG=N
Review URL: https://codereview.chromium.org/1694263002
Cr-Commit-Position: refs/heads/master@{#34016}
This functionality is useful for stubs that need to walk the stack. The new
machine operator, LoadParentFramePointer dosn't force the currently compiling
method to have a frame in contrast to LoadFramePointer. Instead, it adapts
accordingly when frame elision is possible, making efficient stack walks
possible without incurring a performance penalty for small stubs that can
benefit from frame elision.
R=bmeurer@chromium.org
LOG=N
Review URL: https://codereview.chromium.org/1695313002
Cr-Commit-Position: refs/heads/master@{#34014}
Harvesting maps from the stub cache for megamorphic ICs is both slow
(linear in the size of the stub cache) and imprecise (as it finds all
maps that have a cached handler for the given property name).
In the canonical megamorphic situation, this type feedback is useless
anyway. The interesting case is when we can filter it down to a single
map; however in these cases it is often possible to derive this map
just by looking at the HGraph, which is both faster and more reliable.
Review URL: https://codereview.chromium.org/1669213003
Cr-Commit-Position: refs/heads/master@{#33998}
Now the tool produces a far more readable output format, which bears a
lot of resemblance to YAML. In fact, the output should be machine
parseable as such, one document per testcase. However, the output format
may be subject to changes in future, so don't rely on this property.
In general, the output format has been optimized for producing a meaningful
textual diff, while keeping a decent readability as well. Therefore, not
everything is as compact as it could be, e.g. for an empty const pool we get:
constant pool: [
]
instead of:
constant pool: []
Also, trailing commas are always inserted in lists.
Additionally, now the tool accepts its output format as input. When
operating in this mode, all the snippets are extracted, processed and
the output is then emitted as usual. If nothing has changed, the output
should match the input. This is very useful for catching bugs in the
bytecode generation by running a textual diff against a known-good file.
The core (namely bytecode-expectations.cc) has been extracted from the
original cc file, which provides the utility as usual. The definitions
in the matching header of the library have been moved into the
v8::internal::interpreter namespace.
The library exposes a class ExpectationPrinter, with a method
PrintExpectation, which takes a test snippet as input, and writes the
formatted expectation to the supplied stream. One might then use a
std::stringstream to retrieve the results as a string and run it through
a diff utility.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1688383003
Cr-Commit-Position: refs/heads/master@{#33997}
This is to enable deduplicating performance tests. We'll
create a hash of all relevant files and send it to perf bots
alongside the other swarming hashes (follow up on infra
side).
This will not actually run on swarming yet, but could at
some later point.
This splits off the cctest executable from other verification
test files, as those are not needed in performance tests.
BUG=chromium:535160
LOG=n
Review URL: https://codereview.chromium.org/1695243002
Cr-Commit-Position: refs/heads/master@{#33989}
Adds support for ES6 super keyword and performing loads, stores, and
calls to super class members.
Implements SetHomeObject and enables ThisFunctionVariable.
BUG=v8:4280,v8:4682
LOG=N
Review URL: https://codereview.chromium.org/1689573004
Cr-Commit-Position: refs/heads/master@{#33977}
Older versions of Emscripten appear to emit Asm.js containing:
HEAP8[x] with x in int
As opposed to the spec legal construct:
HEAP8[x>>0] with x in int
As older programs and even benchmarks such as Embenchen
include these constructs, support them for compatibility.
BUG= https://code.google.com/p/v8/issues/detail?id=4203
TEST=test-asm-validator,mjsunit/asm-wasm
R=aseemgarg@chromium.org,titzer@chromium.org
LOG=N
Review URL: https://codereview.chromium.org/1692713006
Cr-Commit-Position: refs/heads/master@{#33964}
This is hopefully the last in a series of cleanup patches around
destructuring assignment. It simplifies the ParseAssignmentExpression
API, making the callers call CheckDestructuringElement() where appropriate.
CheckDestructuringElement has been further simplified to only emit the
errors that the parser depends on it emitting.
I've also beefed up the test coverage in test-parsing.cc to
handling all the destructuring flags being on, which caught an oddity
in how we disallow initializers in spreads in patterns (we need to treat
RewritableAssignmentExpressions as Assignments for the purpose of
error checking).
Finally, I added a few helper methods to ParserBase to handle a few
classes of expressions (assignments and literals-as-patterns).
Review URL: https://codereview.chromium.org/1696603002
Cr-Commit-Position: refs/heads/master@{#33961}
This change expands allocation sampling to include old, map, code, and large object spaces. This involved refactoring much of the observation logic out of NewSpace into Space and overriding as needed in sub-classes.
Additionally, the sampling heap profiler now maintains a pair of heap observers. One observer is used for observing new space and resetting the inline allocation limit to be periodically notified of allocations. The other observes allocation across the other spaces where there is no additional work required to observe allocations.
Tests have been updated to ensure that allocations are observed correctly for Paged and LargeObject spaces.
R=ofrobots@google.com, hpayer@chromium.org, ulan@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1625753002
Cr-Commit-Position: refs/heads/master@{#33959}
Recent flake happened bacause all the samples landed into native code.
The patch makes sure we collect enough JS samples.
BUG=v8:4751
LOG=N
Review URL: https://codereview.chromium.org/1695663002
Cr-Commit-Position: refs/heads/master@{#33953}
There are only two uses of %_ObjectEquals left, which should actually
use strict equality instead, so there's no need to keep this special
logic at all.
R=mvstanton@chromium.org
Review URL: https://codereview.chromium.org/1692193002
Cr-Commit-Position: refs/heads/master@{#33948}
The tests in question have been disabled because throwing into lazy
deoptimized code was borked. After recent fixes landed these tests
should now pass again.
R=jarin@chromium.org
TEST=cctest/test-run-deopt/DeoptExceptionHandler
BUG=v8:4195
LOG=n
Review URL: https://codereview.chromium.org/1692873002
Cr-Commit-Position: refs/heads/master@{#33937}
Remove some Ignition skips in mjsunit and cctest, and replace a few
others with fails now that the there is more debugger support.
BUG=v8:4680
LOG=N
Review URL: https://codereview.chromium.org/1689993002
Cr-Commit-Position: refs/heads/master@{#33932}
Apparently, this BytecodeArrayIterator method was missed during the
previous refactor. No other (collateral) change was done.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1691433002
Cr-Commit-Position: refs/heads/master@{#33909}
This replaces the bytecode in question with a runtime call within the
bytecode stream. The tradeoff is to safe one bytecode opcode for more
expensive encoding of lookup slot deletion.
R=rmcilroy@chromium.org
Review URL: https://codereview.chromium.org/1690913002
Cr-Commit-Position: refs/heads/master@{#33907}
This is a follow-up to https://crrev.com/1671863002, adding the
capability to print the contents of the constant pool. The expected
type of the pool is taken from command line, and it's either:
* string/int/double: assume all constants have the specified type.
This way, we can emit a meaningful representation, e.g. a quoted
string for type string and so on. All the constants in the pool must
have the same type, otherwise one or more CHECK() will fail and the
program will eventually crash.
* mixed: print the InstanceType tag instead of the actual value.
This is the choice for those tests where the type of the constants in
the pool is not uniform, however only a type tag is printed, not the
actual value of the entries. SMIs are an exception, since they do not
have an InstanceType tag, so kInstanceTypeDontCare is printed instead.
In addition to that, functions Print{ExpectedSnippet,BytecodeSequence}
have been extracted with no functional change. It's just for improving
readability, since the code is becoming quite long.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1686963002
Cr-Commit-Position: refs/heads/master@{#33888}
Add dedicated %LoadLookupSlot, %LoadLookupSlotInsideTypeof,
%LoadLookupSlotForCall, %StoreLookupSlot_Sloppy and
%StoreLookupSlot_Strict runtime entry points and use them
appropriately in the various compilers. This way we can
finally drop the machine operators from the JS graph level
completely in TurboFan.
Also drop the funky JSLoadDynamic operator from TurboFan,
which was by now just a small wrapper around the runtime
call to %LoadLookupSlot.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1683103002
Cr-Commit-Position: refs/heads/master@{#33880}
The previous implementation used GetRawOperand(), which allows a nicely
unified handling of all scalar types, but returns an unsigned type.
Because of this, generate-bytecode-expectations couldn't properly handle
negative numbers.
This commit differentiate between different types of scalar operands and
uses the appropriate getter from i::interpreter::BytecodeArrayIterator,
thus correctly handling signed types where needed.
Two new helpers have been added to i::interpreter::Bytecodes:
* IsImmediateOperandType()
* IsIndexOperandType()
with the intuitive semantic.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1684113002
Cr-Commit-Position: refs/heads/master@{#33874}
generate-bytecode-expectations is a tool intended to work together
with test/cctest/test-bytecode-generator.cc in order to produce a
meaningful diff between testcases and the actual bytecode being emitted.
It does so by parsing and compiling Javascript to bytecode,
constructing the same data structure in the testcase and then running a
textual diff between the expected (i.e. the one encoded in the unit test)
and actual (i.e. the one built from the compiler output) representation.
This commit is a first step in this direction, achieving just the first
half of what we desire. At the moment, bytecodechecker can:
* take a code snippet from the command line and emit the expected structure.
* adhere to the same formatting rules of the test cases
(this one is important for text diff and for copy and pasting too)
Still to do:
* parse unit tests:
+ extract code snippets
+ indent the code to match the input test case
+ allow flexibility in the input format
+ try to recognize and work around some macro magic (i.e. REPEAT_127)
* emit the representation of the constant pool and handlers vector
* run a textual diff
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1671863002
Cr-Commit-Position: refs/heads/master@{#33863}
The field in question is only needed when the optimizing compiler is
triggered via OSR. All other paths (e.g. from bytecode stream) should
not rely on the unoptimized code being present.
R=yangguo@chromium.org
Review URL: https://codereview.chromium.org/1685633002
Cr-Commit-Position: refs/heads/master@{#33860}
Preparing the young generation for (real) non-contiguous backing memory, this
change removes object masks that are used to compute containment in semi and new
space. The masks are replaced by lookups for object tags and page headers, where
possible.
Details:
- Use the fast checks (page header lookups) for containment in regular code.
- Use the slow version that masks out the page start adress and iterates all
pages of a space for debugging/verification.
- The slow version works for off-heap/unmapped memory.
- Encapsulate all checks for the old->new barrier in Heap::RecordWrite().
BUG=chromium:581412
LOG=N
Review URL: https://codereview.chromium.org/1632913003
Cr-Commit-Position: refs/heads/master@{#33857}
This makes sure we can run through the TurboFan pipeline without having
to parse the source when using the bytecode stream as input. This path
is now being tested by the BytecodeGraphTester helper.
R=titzer@chromium.org,rmcilroy@chromium.org
Review URL: https://codereview.chromium.org/1679313002
Cr-Commit-Position: refs/heads/master@{#33856}
By now only the default %TypedArray%.prototype.sort compare function
and the JS implementation of SameValueZero were still using the odd
%_IsMinusZero intrinsic, whose semantics both included a number check
(actually HeapNumber test) plus testing if the heap number stores the
special -0 value. In both cases we already know that we deal with
number so we can reduce it to a simple number test for -0, which can
be expressed via dividing 1 by that value and checking the sign of
the result. In case of the compare function, we can be even smarter
and work with the reciprocal values in case x and y are equal to 0
(although long term we should probably rewrite the fast case for
the typed array sorting function in C++ anyway, which will be way,
way faster than our handwritten callback-style, type-feedback
polluted JS implementation).
R=yangguo@chromium.org
Review URL: https://codereview.chromium.org/1680783002
Cr-Commit-Position: refs/heads/master@{#33833}
Do not rely on elapsed time to collect enough samples.
Use CollectSample API function instead.
Remove checks for extra functions present in a profile, as
there in fact can be lots of native support functions.
BUG=v8:2999
LOG=N
Review URL: https://codereview.chromium.org/1665303004
Cr-Commit-Position: refs/heads/master@{#33822}
This allows us to remove the somewhat awkward BuildLoadObjectField
from the BytecodeGraphBuilder and also allows us to simplify the
bytecode stream for class literals.
R=oth@chromium.org
Review URL: https://codereview.chromium.org/1678103002
Cr-Commit-Position: refs/heads/master@{#33820}
Adds implementation and tests to support const/let variables in the
interpreter.
BUG=v8:4280,v8:4679
LOG=N
Review URL: https://codereview.chromium.org/1634153002
Cr-Commit-Position: refs/heads/master@{#33819}
The flag in question is a debug-only flag supported by full-codegen and
Crankshaft only. In it's current form there are some unresolved issues:
- The flag is defeated by inlining in Crankshaft.
- The flag is not supported by TurboFan.
- The flag is not supported by Ignition.
Instead of addressing the above issues and increasing maintenance cost
for all backends and also given the "slim" test coverage, this CL fully
removes the support from all backends.
R=bmeurer@chromium.org,jkummerow@chromium.org
Review URL: https://codereview.chromium.org/1676263002
Cr-Commit-Position: refs/heads/master@{#33817}
Replace the somewhat awkward RestParamAccessStub, which would always
call into the runtime anyway with a proper FastNewRestParameterStub,
which is basically based on the code that was already there for strict
arguments object materialization. But for rest parameters we could
optimize even further (leading to 8-10x improvements for functions with
rest parameters), by fixing the internal formal parameter count:
Every SharedFunctionInfo has a formal_parameter_count field, which
specifies the number of formal parameters, and is used to decide whether
we need to create an arguments adaptor frame when calling a function
(i.e. if there's a mismatch between the actual and expected parameters).
Previously the formal_parameter_count included the rest parameter, which
was sort of unfortunate, as that meant that calling a function with only
the non-rest parameters still required an arguments adaptor (plus some
other oddities). Now with this CL we fix, so that we do no longer
include the rest parameter in that count. Thereby checking for rest
parameters is very efficient, as we only need to check whether there is
an arguments adaptor frame, and if not create an empty array, otherwise
check whether the arguments adaptor frame has more parameters than
specified by the formal_parameter_count.
The FastNewRestParameterStub is written in a way that it can be directly
used by Ignition as well, and with some tweaks to the TurboFan backends
and the CodeStubAssembler, we should be able to rewrite it as
TurboFanCodeStub in the near future.
Drive-by-fix: Refactor and unify the CreateArgumentsType which was
different in TurboFan and Ignition; now we have a single enum class
which is used in both TurboFan and Ignition.
R=jarin@chromium.org, rmcilroy@chromium.orgTBR=rossberg@chromium.org
BUG=v8:2159
LOG=n
Review URL: https://codereview.chromium.org/1676883002
Cr-Commit-Position: refs/heads/master@{#33809}
Fix failures on MIPS simulator because incomplete
handling of MTHC1 and MFHC1 in Fp32 mode
Fix failures on older kernels that have problems with
MTHC1 and MFHC1 in kernel FPU emulation
Original issue's description:
> Revert of MIPS: Add FPXX support to MIPS32R2 (patchset #3
> id:40001 of https://codereview.chromium.org/1586223004/ )
>
> Reason for revert:
> Revert patch due to a number of failures appearing on the > MIPS v8 simulator
>
> Original issue's description:
>> MIPS: Add FPXX support to MIPS32R2
>>
>> The JIT code generated by V8 is FPXX compliant
>> when v8 compiled with FPXX flag. This allows the code to
>> run in both FP=1 and FP=0 mode. It also alows v8 to be used
>> as a library by both FP32 and FP64 binaries.
>>
>> BUG=
>>
>> Committed: https://crrev.com/95110dde666158a230a823fd50a68558ad772320
>> Cr-Commit-Position: refs/heads/master@{#33576}
BUG=
Review URL: https://codereview.chromium.org/1659883002
Cr-Commit-Position: refs/heads/master@{#33808}
This replaces the global remembered set with per-page remembered sets.
Each page in the old space, map space, and large object space keeps track of
the set of slots in the page pointing to the new space.
The data structure for storing slot sets is a two-level bitmap, which allows
us to remove the store buffer overflow and SCAN_ON_SCAVENGE logic.
Design doc: https://goo.gl/sMKCf7
BUG=chromium:578883
LOG=NO
Review URL: https://codereview.chromium.org/1608583002
Cr-Commit-Position: refs/heads/master@{#33806}
Previously ObjectTemplate::New() logic relied on the fact that all the accessor properties are already installed in the initial map of the function object of the constructor FunctionTemplate.
When the FunctionTemplate were instantiated the accessors of the instance templates from the whole inheritance chain were accumulated and added to the initial map.
ObjectTemplate::SetSetAccessor() used to explicitly ensure that the ObjectTemplate has a constructor and therefore an initial map to add all accessors to.
The new approach is to add all the accessors and data properties to the object exactly when the ObjectTemplate is instantiated. In order to keep it fast we now cache the object boilerplates in the Isolate::template_instantiations_cache (the former function_cache), so the object creation turns to be a deep copying of the boilerplate object.
BUG=chromium:579009
LOG=Y
Committed: https://crrev.com/6a118774244d087b5979e9291d628a994f21d59d
Cr-Commit-Position: refs/heads/master@{#33674}
Review URL: https://codereview.chromium.org/1642223003
Cr-Commit-Position: refs/heads/master@{#33798}
