Adds support for visiting the Call bytecode to the bytecode graph builder.
This change also adds the call type feedback slot to the Call bytecode.
This is not currently used by the interpreter, but is used by the
graph builder.
Also adds a CallWide varient of the Call bytecode, and adds the kCount16
operand type.
Landed on behalf of rmcilroy.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1456453002
Cr-Commit-Position: refs/heads/master@{#32033}
Adds implementation and tests for following operators in bytecode graph builder:
-VisitLoadICSloppy
-VisitLoadICStrict
-VisitLoadICSloppyWide
-VisitLoadICStrictWide
The current implementation introduces empty frame states for frame state inputs expected by these operations.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1419373007
Cr-Commit-Position: refs/heads/master@{#32026}
This is the first part to refactoring the JSNativeContextSpecialization
class, which has grown way too big recently.
Also don't collect cross context feedback for the CallIC in general.
Neither TurboFan nor Crankshaft can make any use of cross context
JSFunction feedback that is collected by the CallIC, so there's no
point in gathering that feedback at all (it just complicates the
checking that is necessary in the compilers). What we should do
instead at some point (when Crankshaft becomes less important) is
to collect the SharedFunctionInfo as feedback for those cases.
R=yangguo@chromium.org
BUG=v8:4470
LOG=n
Review URL: https://codereview.chromium.org/1451273002
Cr-Commit-Position: refs/heads/master@{#32022}
- Removed PASS/FAIL line for arrow/rest params test which should now pass.
- Moved soon-to-be-changed tests about built-in prototypes as plain objects
to INVALID section (and noted that they'll be fixed with the
next test262 roll).
R=littledan@chromium.org
Review URL: https://codereview.chromium.org/1450243002
Cr-Commit-Position: refs/heads/master@{#32020}
The TiesEven rounding mode rounds float64 numbers to the nearest
integer. If there are two nearest integers, then the number is rounded
to the even one. This is the default rounding mode according to
IEEE~754.
I implemented the operator on ia32, x64, arm, arm64, mips, and mips64.
I think there is a bug in the current implementation of the ppc
simulator, which kept me from implementing the operator on ppc.
According to my understanding of the ppc instruction manual, the FRIN
instruction provides the right behavior for Float64RoundTiesEven. In the
simulator, however, FRIN provides a different semantics. If there are
two nearest integers, then the simulator returns the one which is
further away form 0.
Review URL: https://codereview.chromium.org/1440293002
Cr-Commit-Position: refs/heads/master@{#32005}
This change binds each {Cancelable} task to a so-called {CancelableTaskManager},
which is then used to handle concurrent cancelation as well as synchronizing
shutdown for already running tasks. Since ownership of tasks is transferred to
the platform executing a task (destructor), handling in the manager uses integer
ids. Note that this also mitigates (modulo integer size) the ABA problem.
All handling of {Cancelable} tasks is now encapsulated into the corresponding
manager, which is instantiated for each isolate.
R=hpayer@chromium.org
BUG=chromium:524425
LOG=N
CQ_EXTRA_TRYBOTS=tryserver.v8:v8_linux_arm64_gc_stress_dbg;tryserver.v8:v8_linux_gc_stress_dbg;tryserver.v8:v8_mac_gc_stress_dbg;tryserver.v8:v8_linux64_msan_rel;tryserver.v8:v8_linux64_tsan_rel;tryserver.v8:v8_mac64_asan_rel
Review URL: https://codereview.chromium.org/1409993012
Cr-Commit-Position: refs/heads/master@{#31997}
The previous code did not properly check for harmony const when
doing the dynamic redeclaration check. This was masked in the
test because each eval had an initializer, and the initializer was what
triggered the exception.
This patch tightens the test by removing initializers and fixes the bug in
DeclareLookupSlot.
Also change the test to use assertThrows where possible.
BUG=v8:4550
LOG=n
Review URL: https://codereview.chromium.org/1437003006
Cr-Commit-Position: refs/heads/master@{#31995}
* Limit triggering of tail calls to explicit use of a new inline runtime
function %_TailCall. %_TailCall works just like %_Call except for using
tail-calling mechanics (currently only in TF).
* Remove hack that recognized some specific usages of %_Call and converted them
into tail calls.
* Support tail calls for all calls where the number of callee stack parameters
is less than or equal to the number of caller stack parameters.
* Use the gap resolver to swizzle parameters and registers to tail calls.
BUG=v8:4076
LOG=n
Review URL: https://codereview.chromium.org/1439613003
Cr-Commit-Position: refs/heads/master@{#31987}
With do-expressions any expression used as a case label can turn into an
OSR entry-point. This means the value being switched over is renamed to
an OSR value and needs to be reloaded from the environment at each case.
R=rossberg@chromium.org
TEST=mjsunit/regress/regress-osr-in-case-label
Review URL: https://codereview.chromium.org/1438123007
Cr-Commit-Position: refs/heads/master@{#31986}
Adds an optimization to omit generating Ldar/Star if the same register
is loaded or stored from the accumulator in the earlier instruction.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1435283002
Cr-Commit-Position: refs/heads/master@{#31984}
This makes sure that inlining a constructor call to a function which
cannot be used as a constructor (e.g. strong mode function) still does
throw correctly when the implicit receiver is created.
R=bmeurer@chromium.org
TEST=mjsunit/regress/regress-inline-strong-as-construct
BUG=v8:4544
LOG=n
Review URL: https://codereview.chromium.org/1447443002
Cr-Commit-Position: refs/heads/master@{#31982}
This aligns the naming of "new target" with the spec text throughout
TurboFan and the stack frame walker. The goal is to avoid unnecessary
confusion for people familiar with the spec.
R=verwaest@chromium.org
Review URL: https://codereview.chromium.org/1442643002
Cr-Commit-Position: refs/heads/master@{#31978}
This is necessary to allow more optimizations to take place between
the representation inference and change lowering. Perhaps we want
to rename SimplifiedLowering -> RepresentationInference and
ChangeLowering -> SimplifiedLowering.
Review URL: https://codereview.chromium.org/1439473003
Cr-Commit-Position: refs/heads/master@{#31976}
The least significant bit of the input value may affect the result of
the conversion through rounding. We OR the least significant with the
second least significant bit to preserve it over the SHR instruction.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1435203003
Cr-Commit-Position: refs/heads/master@{#31969}
This adds initial support for fast inline allocations of JSObject
instances. It currently has exactly the same limitations as Crankshaft.
R=mstarzinger@chromium.org
BUG=v8:4544
LOG=n
Review URL: https://codereview.chromium.org/1441573004
Cr-Commit-Position: refs/heads/master@{#31957}
This passes both, the actual constructor and the original constructor,
to nodes having the {JSCreate} operator. This is required for allocating
properly subclassed implicit receiver objects.
R=verwaest@chromium.org
BUG=v8:4544
LOG=n
Review URL: https://codereview.chromium.org/1434873004
Cr-Commit-Position: refs/heads/master@{#31955}
This implements a first version of support for constructor call inlining
in the inlining machinery. For now we can only inline calls where the
actual constructor and the original constructor coincide (i.e. no super
constructor calls). Note that the target of a super constructor call is
loaded with a runtime call, so there is no way for it to be constant
promoted at the moment.
R=bmeurer@chromium.org
BUG=v8:4544
LOG=n
Review URL: https://codereview.chromium.org/1435873002
Cr-Commit-Position: refs/heads/master@{#31954}
Presently the inline allocation step is a static value defined to be the minimum
of the step sizes over all the observers. The step occur every (approx.) step
byte. This is unfair to observers whose steps are not evenly divisible by the
min step size. For example, consider two observers with steps sizes of 512 and
576 bytes. Across 16kb allocated, you would expect the first observer to be hit
approximately 32 times, and the second observer to be hit approximately 28
times.
In reality, the observers get notified 30 and 15 times respectively. The reason
is that each step is 512 bytes, and since 576 is not evenly divisible by 512,
it gets notified much less frequently.
This CL fixes the problem by making the next step size be the minimum (over all
observers) of the remaining bytes to get to the step, making the steps fair.
BUG=
R=hpayer@chromium.org,ulan@chromium.org
Review URL: https://codereview.chromium.org/1427973006
Cr-Commit-Position: refs/heads/master@{#31948}
Popcnt is implemented as an optional operator, which is only implementd by x64
at the moment.
Review URL: https://codereview.chromium.org/1424173006
Cr-Commit-Position: refs/heads/master@{#31928}
Jic and jialc compact branch ops are fixed as they does not have 'forbidden slot' restriction. Also COP1 branches (CTI instructions) added to IsForbiddenAfterBranchInstr().
TEST=cctest/test-disasm-mips/Type0
BUG=
Review URL: https://codereview.chromium.org/1423493006
Cr-Commit-Position: refs/heads/master@{#31922}
Generated code performs distinct floating multiply and add/subtract
operations. Tests fail when GCC uses fmadd/fmsub to calculate the
expected result since these instructions provide higher accuracy due
to the lack of an intermediate round.
R=machenbach@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1416123007
Cr-Commit-Position: refs/heads/master@{#31918}
This patch extends the typed lowering with a specialized version of 'instanceof' that is used if the "class", i.e. the constructor function, is a known constant.
Unittests check that replacement occurs as intended. Functional correctness is ensured by extensive unit tests covering instanceof already in the testsuite.
TESTS=unittests/JSTypedLoweringTest.{JSInstanceOfSpecializationWithSmiCheck,JSInstanceOfSpecializationWithoutSmiCheck,JSInstanceOfNoSpecialization}
Review URL: https://codereview.chromium.org/1407413014
Cr-Commit-Position: refs/heads/master@{#31916}
RegExp.prototye[@@split] is not yet implement to spec regarding creating
new RegExp object with the SpeciesConstructor.
R=littledan@chromium.org
BUG=v8:4345
LOG=N
Review URL: https://codereview.chromium.org/1427573005
Cr-Commit-Position: refs/heads/master@{#31911}
Reason for revert: failed tests on a Windows build.
TBR=rossberg,cbruni,neis
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1426943007
Cr-Commit-Position: refs/heads/master@{#31907}
I improved the tests for Word32Clz, Word32Ctz, and Word32Popcnt, and ported
some tests to the BufferedRawMachineAssemblerTester.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1437493002
Cr-Commit-Position: refs/heads/master@{#31896}
Remove some non-standard code that doesn't do anything anyways.
While FireFox uses this to set the default value for the multiline flag,
it is nonstandard and slated for removal. The matching behaviour has
never been implemented in either JSC or V8, so there is little
web-compat risk.
The only possible risk could be someone depending on the ToBoolean()
behaviour of the flag, but this seems unlikely.
BUG=v8:3870
LOG=N
R=adamk@chromium.org, littledan@chromium.org, yangguo@chromium.org
CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.blink:linux_blink_rel
Review URL: https://codereview.chromium.org/1417733012
Cr-Commit-Position: refs/heads/master@{#31882}
While working on frame elision, I wanted to disassemble codegen in the
debugger, as the code generation is progressing. I discovered we had a
"Print" member on the x64 assembler, without any implementation. I
pulled it up to AssemblerBase and gave it an implementation that
should work for the other architectures.
Also checked that ia32, x87, arm and arm64 assemblers didn't have
such an implementation - free Print.
Arm64 has a naming conflict with the v8::internal::Disassembler. I
renamed the arm64 type with a more specific name.
Opportunistically fixed a bug in the name converter. This debug-time
printer doesn't provide a Code object, which should be OK with the
name converters, by the looks of other APIs there. All this means is that
when using the Print() API, we just get addresses dumped without any
context (like what this address may be - a stub maybe, etc). This seems
fine for the scenario.
There may be other places that assume a Code object. Since this is
a diagnostics-only scenario, for codegen developers, I feel it is
reasonable to fix such other places as we find them.
Review URL: https://codereview.chromium.org/1431933003
Cr-Commit-Position: refs/heads/master@{#31869}
JSRegExp's properties backing stores must not be shared.
BUG=chromium:548580
LOG=N
Review URL: https://codereview.chromium.org/1429743006
Cr-Commit-Position: refs/heads/master@{#31867}
Use compare-negate instruction if the right-hand input to a compare is a
negate operation.
BUG=
Review URL: https://codereview.chromium.org/1410123009
Cr-Commit-Position: refs/heads/master@{#31866}
Adds a blacklist of tests which are currently unsupported or broken in Ignition to
the mjsunit and test262 test status.
Also removes --ignition-script-filter flag, and adds a
--ignition_fallback_on_eval_and_catch flag which fallsback to fullcodegen for
functions which call eval or contain a catch block.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1420963009
Cr-Commit-Position: refs/heads/master@{#31864}
This fixes a corner case where optimized code could still be reachable
through the optimized code map, even though unoptimized code for any
inlined function might have long been flushed.
R=ulan@chromium.org
TEST=cctest/test-heap/Regress513496
BUG=chromium:513496
LOG=n
Review URL: https://codereview.chromium.org/1415683011
Cr-Commit-Position: refs/heads/master@{#31857}
We forgot to add the number of arguments parameter in
JSFrameSpecialization, which was added before the context.
R=jarin@chromium.org
BUG=chromium:552304
LOG=n
Review URL: https://codereview.chromium.org/1429233004
Cr-Commit-Position: refs/heads/master@{#31856}
Adds a test that the receiver for sloppy mode functions is replaced with
the global proxy when called with an undefined receiever.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1410113008
Cr-Commit-Position: refs/heads/master@{#31854}
This change does not change how the BufferedRawMachineAssemblerTester is
used in tests, but it makes its construction in other constructors (e.g.
in the WasmRunner) cleaner.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1414203009
Cr-Commit-Position: refs/heads/master@{#31850}
It was originally shipped in https://crrev.com/eef2b9b09723ba1dae3ec0172341e93e9030ada0,
but was reverted due to poor interaction with Blink.
That interaction seems to be fixed thanks to changes to the V8 API
and to @@toStringTag handling on access-checked objects.
BUG=v8:3502
LOG=y
CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.v8:v8_linux_nosnap_rel;tryserver.blink:linux_blink_rel
Review URL: https://codereview.chromium.org/1406293011
Cr-Commit-Position: refs/heads/master@{#31846}
On MIPS arch, all memory accesses (including halfword)
must be aligned to their native size or an alignment exception occurs.
The kernel will fix this up, but with performance penalty.
TEST=test-bytecode-generator/CallRuntime
BUG=
Review URL: https://codereview.chromium.org/1423373004
Cr-Commit-Position: refs/heads/master@{#31845}
Since enabling destructuring already implies enabling default parameters,
there's not a good way to separate these two. Luckily, they're both
feature-complete (save for destructuring assignment).
This causes us to pass an additional 24 test262 tests.
BUG=v8:811, v8:2160
LOG=y
Review URL: https://codereview.chromium.org/1407393009
Cr-Commit-Position: refs/heads/master@{#31844}
This patch adds UseCounters for the various language modes. This may
be useful for helping us to prioritize future optimization and
language design decisions.
R=adamk
CC=seththompson
BUG=none
Review URL: https://codereview.chromium.org/1429173002
Cr-Commit-Position: refs/heads/master@{#31841}
This fixes receiver conversion since the Call builtin does it correctly.
BUG=v8:4526
LOG=n
Review URL: https://codereview.chromium.org/1407373007
Cr-Commit-Position: refs/heads/master@{#31823}
The %_CallFunction doesn't implement the call sequence properly, it
doesn't do the receiver wrapping, nor does it check for
classConstructor. Also the eager deoptimization for %_CallFunction was
seriously b0rked (we must have been lucky with TurboFan so far).
R=yangguo@chromium.org
BUG=v8:4413
LOG=n
Review URL: https://codereview.chromium.org/1419813010
Cr-Commit-Position: refs/heads/master@{#31821}
TurboFan didn't fully support the relevant ES6 type conversion
intrinsics like %_ToNumber, %_ToLength, %_ToName, %_ToString and
%_ToInteger until now, we always went to the runtime instead. These
intrinsics are now well supported in TurboFan, and we are even able to
generate quite decent code in some cases.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1428243003
Cr-Commit-Position: refs/heads/master@{#31820}
Fix an earlier regression which forbid non-VariableProxy LHS from being
used in for-of loops. Like for-in loops, the spec allows any LHS to be used,
with the sole exception that ObjectLiterals and ArrayLiterals must be valid
AssignmentPatterns.
Also fixes a bug in TurboFan which resulted in incorrectly replacing a variable load with a constant value in some instances, due to the AstLoopAssignmentAnalyzer failing to record the assignment to ForOfStatement's value.
BUG=v8:4418, v8:2720
LOG=N
R=wingo@igalia.com, littledan@chromium.org, adamk@chromium.org, bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1411873004
Cr-Commit-Position: refs/heads/master@{#31816}
Expose the steps for incremental marking and idle scavenge more directly in
NewSpace. Adjust the NewSpace and Heap interfaces to allow callers to be more
clear about how they are interacting with inline allocation steps. This refactor
prepares the ground for more consumers of inline allocation steps (e.g. sampling
heap profiler.)
R=hpayer@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1404523002
Cr-Commit-Position: refs/heads/master@{#31814}
This patch moves ES2015 ToLength semantics on array operations, etc
to from staging to shipping.
R=adamk
BUG=v8:3087
LOG=Y
Review URL: https://codereview.chromium.org/1433473003
Cr-Commit-Position: refs/heads/master@{#31810}
The CL https://codereview.chromium.org/1409013004 added / changed some test cases.
Some new test cases use CheckFloatEq(...) and CheckDoubleEq(...) function for result
check. When GCC compiling the CheckFloatEq() and CheckDoubleEq() function, those inlined
functions has different behavior comparing with GCC ia32 build and x87 build. The major
difference is sse float register still has single precision rounding semantic. While X87
register has no such rounding precsion semantic when directly use register value. The V8
turbofan JITTed has exactly same result in both X87 and IA32 port.
So we add the following sentence to do type case to keep the same precision.
float expect = *i * *j; // *i + *j, etc.
For test case "RunFloat64MulAndFloat64Add1 / RunFloat64MulAndFloat64Add2 / RunFloat64MulAndFloat64Sub1
/ RunFloat64MulAndFloat64Sub2", the expected result calcaulated by GCC has difference precsion
when comparing with V8 turbofan result for X87 platform. (Turbofan X87 result is the same as
IA32 GCC and IA32 Turbofan). So we have to disable those four cases for X87 port.
BUG=
Review URL: https://codereview.chromium.org/1430943002
Cr-Commit-Position: refs/heads/master@{#31808}
This deprecates the ability of the raw machine assembler to utilize the
CallFunctionStub in preparation of the stub itself being deprecated. We
only used this to test instruction selection of calls to stubs that can
deoptimize, the test has been adapted.
R=verwaest@chromium.org
TEST=unittests/InstructionSelectorTest
Review URL: https://codereview.chromium.org/1408193006
Cr-Commit-Position: refs/heads/master@{#31799}
Reason for revert:
MSAN errors on arm64: http://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20arm64%20-%20sim%20-%20MSAN/builds/5123/
Original issue's description:
> [es6] Implement destructuring binding in try/catch
>
> The approach is to desugar
>
> try { ... }
> catch ({x, y}) { ... }
>
> into
>
> try { ... }
> catch (.catch) {
> let x = .catch.x;
> let y = .catch.y;
> ...
> }
>
> using the PatternRewriter's normal facilities. This has the side benefit
> of throwing the appropriate variable conflict errors for declarations
> made inside the catch block.
>
> No change is made to non-destructured cases, which will hopefully save
> us some work if https://github.com/tc39/ecma262/issues/150 is adopted
> in the spec.
>
> There's one big problem with this patch, which is a lack of PreParser
> support for the redeclaration errors. But it seems we're already lacking
> good PreParser support for such errors, so I'm not sure that should
> block this moving forward.
>
> BUG=v8:811
> LOG=y
>
> Committed: https://crrev.com/a316db995e6e4253664920652ed4e5a38b2caeba
> Cr-Commit-Position: refs/heads/master@{#31797}
TBR=rossberg@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:811
Review URL: https://codereview.chromium.org/1408063013
Cr-Commit-Position: refs/heads/master@{#31798}
The approach is to desugar
try { ... }
catch ({x, y}) { ... }
into
try { ... }
catch (.catch) {
let x = .catch.x;
let y = .catch.y;
...
}
using the PatternRewriter's normal facilities. This has the side benefit
of throwing the appropriate variable conflict errors for declarations
made inside the catch block.
No change is made to non-destructured cases, which will hopefully save
us some work if https://github.com/tc39/ecma262/issues/150 is adopted
in the spec.
There's one big problem with this patch, which is a lack of PreParser
support for the redeclaration errors. But it seems we're already lacking
good PreParser support for such errors, so I'm not sure that should
block this moving forward.
BUG=v8:811
LOG=y
Review URL: https://codereview.chromium.org/1417483014
Cr-Commit-Position: refs/heads/master@{#31797}
Use the Call builtin instead, which does the right thing(TM)
always, especially since the CallFunctionStub is going away.
R=jarin@chromium.org
BUG=v8:4413
LOG=n
Review URL: https://codereview.chromium.org/1410853007
Cr-Commit-Position: refs/heads/master@{#31794}
This removes several methods from JSFunction that just delegate to
SharedFunctionInfo. These methods are especially dangerous when they
hide the fact that they potentially affect all function instances
deriving from the same underlying SharedFunctionInfo.
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1417213005
Cr-Commit-Position: refs/heads/master@{#31792}
The current implementation of classes throws the TypeError at the wrong
point, after activating a new context when directly calling a class
constructor. According to the spec, the TypeError has to be thrown
in the caller context.
LOG=N
BUG=v8:4428
Committed: https://crrev.com/6a06bc0a774933719f62009d81b3f1686d83bb90
Cr-Commit-Position: refs/heads/master@{#31786}
Review URL: https://codereview.chromium.org/1418623007
Cr-Commit-Position: refs/heads/master@{#31790}
The callees are expected to properly set the number of actual
arguments passed to the callee, which is now represented correctly
in the TurboFan graphs by a new Parameter right before the context
Parameter. Currently this is only being used for outgoing calls.
Note that this requires disabling two of the TF code stub tests,
because of the JavaScript graphs are not automagically compatible
with abitrary (incoming) code stub interface descriptors. If we
want to support JS code stubs at all, then we need to find a sane
way to feed in this information.
Drive-by-fix: Don't insert a direct call to a classConstructor.
R=mstarzinger@chromium.org
BUG=v8:4413, v8:4428
LOG=n
Review URL: https://codereview.chromium.org/1410633006
Cr-Commit-Position: refs/heads/master@{#31789}
Reason for revert:
failing build bot
Original issue's description:
> [runtime] Fix ES6 9.2.1 [[Call]] when encountering a classConstructor.
>
> The current implementation of classes throws the TypeError at the wrong
> point, after activating a new context when directly calling a class
> constructor. According to the spec, the TypeError has to be thrown
> in the caller context.
>
> LOG=N
> BUG=v8:4428
>
> Committed: https://crrev.com/6a06bc0a774933719f62009d81b3f1686d83bb90
> Cr-Commit-Position: refs/heads/master@{#31786}
TBR=bmeurer@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4428
Review URL: https://codereview.chromium.org/1415783006
Cr-Commit-Position: refs/heads/master@{#31787}
The current implementation of classes throws the TypeError at the wrong
point, after activating a new context when directly calling a class
constructor. According to the spec, the TypeError has to be thrown
in the caller context.
LOG=N
BUG=v8:4428
Review URL: https://codereview.chromium.org/1418623007
Cr-Commit-Position: refs/heads/master@{#31786}
This makes the description in the README file for our test262 harness
independent of the underlying revision. The one canonical place to
mention the up-to-date revision is the DEPS file.
R=machenbach@chromium.org
NOTRY=true
Review URL: https://codereview.chromium.org/1424043006
Cr-Commit-Position: refs/heads/master@{#31778}
This removes special casing for the 'f.arguments' property accessor. Any
local 'arguments' variable should not be allowed to influence the value
returned by the indirect 'f.arguments' property. That property creates a
new object with a separate identity everytime it is read. This is by now
consistent with other browsers.
R=rossberg@chromium.org
TEST=mjsunit/arguments-indirect
Review URL: https://codereview.chromium.org/1408983006
Cr-Commit-Position: refs/heads/master@{#31776}
Adds support for calling JS runtime functions. Also changes the bytecode
array builder to allow calling functions with an invalid argument
register if the call takes no arguments.
Adds the bytecode CallJSRuntime.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1410003003
Cr-Commit-Position: refs/heads/master@{#31774}
Corrects LdaGlobal to deal with TypeofMode::INSIDE_TYPEOF so that it
doesn't throw a reference error on undefined globals.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1422443006
Cr-Commit-Position: refs/heads/master@{#31757}
Original issue's description:
> [es6] Fix Function and GeneratorFunction built-ins subclassing.
>
> BUG=v8:3101, v8:3330
> LOG=Y
>
> Committed: https://crrev.com/99e7f872d3d0a5fb799dcbafb05537cda491314a
> Cr-Commit-Position: refs/heads/master@{#31708}
The problem was in another CL, this is a clean reland with improved tests.
BUG=v8:3101, v8:3330
LOG=Y
Review URL: https://codereview.chromium.org/1415683007
Cr-Commit-Position: refs/heads/master@{#31756}
This matches the approach used for @@isConcatSpreadable, and seems to
match what Mozilla is planning to do in Firefox.
Given that there's already little compatibility around cross-origin toString
results, there seems to be little hazard in making this change even before
spec language hits the HTML spec.
BUG=v8:3502, v8:4289, chromium:532469
LOG=n
Review URL: https://codereview.chromium.org/1432543002
Cr-Commit-Position: refs/heads/master@{#31755}
If the property is a data property on the holder (or does not exist) and is a readonly data property in the receiver, then we must fail.
R=rossberg, verwaest@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1424233005
Cr-Commit-Position: refs/heads/master@{#31751}
1) The Map::CopyInitialMap() did not set descriptor's array if
the source initial map had one.
2) Subclasses are temporarily disallowed to have more in-object
properties than the parent class (for GC reasons).
BUG=v8:3101, v8:3330, v8:4531
LOG=N
Review URL: https://codereview.chromium.org/1431593003
Cr-Commit-Position: refs/heads/master@{#31743}
Existing code was assuming that 'lexical' blocks were the same as basic
blocks, therefore code which emitted jumps within a lexical block (e.g.,
logical or) would in some occassions incorrectly omit a necessary
ToBoolean.
This change removes Enter/LeaveBlock from BytecodeArrayBuilder and
instead tracks basic blocks via label bindings and jump operations. The
change also ensures we don't emit dead code at the end of a basic block,
and adds tests of the edge cases.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1406983010
Cr-Commit-Position: refs/heads/master@{#31741}
TurboFan is actually able to generate property access to all prototypes
of all primitives, except the special Oddball primitives that have no
wrapper counterparts (namely null and undefined from the ES6 point of
view).
R=jarin@chromium.org
BUG=v8:4470
LOG=n
Review URL: https://codereview.chromium.org/1409163007
Cr-Commit-Position: refs/heads/master@{#31739}
The calling context is the second top-most non-debugger context on the
stack, but that's not necessarily the actually calling context, e.g.,
when a tail-call was used.
BUG=chromium:541703
R=verwaest@chromium.org
LOG=y
Review URL: https://codereview.chromium.org/1431473003
Cr-Commit-Position: refs/heads/master@{#31719}
The BufferedRawMachineAssemblerTester takes care of storing and loading
parameters to and from memory for these test cases. By using the
BufferedRawMachineAssemblerTester the test cases become more readible.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1409013004
Cr-Commit-Position: refs/heads/master@{#31718}
Adds an optimization to not emit unnecessary jumps and dead code in If,
For, While, and do-while statments. When the value of condition is known
at compile time, the code is emitted only for the paths that can be taken.
For example, when the condition is known to be true in an if statmenet
only then block is generated.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1414193006
Cr-Commit-Position: refs/heads/master@{#31715}
This moves the optimization for variables loads targeting lookup slots
in DYNAMIC_GLOBAL and DYNAMIC_LOCAL mode into the AstGraphBuilder. This
way we implicitly get all optimizations that target global loads and
context loads for free.
R=bmeurer@chromium.org
BUG=v8:4513
LOG=n
Review URL: https://codereview.chromium.org/1424943008
Cr-Commit-Position: refs/heads/master@{#31713}
Original issue's description:
> [es6] Better support for built-ins subclassing.
>
> Create proper initial map for original constructor (new.target) instead of doing prototype
> transition on the base constructor's initial map. This approach fixes in-object slack tracking
> for subclass instances.
> This CL also fixes subclassing from String.
>
> BUG=v8:3101, v8:3330
> LOG=Y
>
> Committed: https://crrev.com/cd5f48302a502154a0106d12e3066bd563c6340c
> Cr-Commit-Position: refs/heads/master@{#31680}
It also fixes typed array map smashing done during typed array initialization.
BUG=v8:3101, v8:3330, v8:4419
LOG=Y
Review URL: https://codereview.chromium.org/1413033006
Cr-Commit-Position: refs/heads/master@{#31701}
This utility makes it possible to test TF graphs that accept parameters of any machine type (even int64 and float64), which are previously problematic due to the complexity of C calling conventions.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1423133005
Cr-Commit-Position: refs/heads/master@{#31698}
Adds an optimization to emit JumpIfToBooleanTrue/False instead
of ToBoolean followed by JumpIfTrue/False if the value in the
accumulator is not boolean.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1426913002
Cr-Commit-Position: refs/heads/master@{#31697}
Adds support for switch statments to the interpreter.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1415093006
Cr-Commit-Position: refs/heads/master@{#31687}
This moves the cctest file for the interpreter to live in the same
namespace as the components it is testing. Hence we can avoid the
forbidden using directives pulling in entire namespaces.
From the Google C++ style guide: "You may not use a using-directive to
make all names from a namespace available". This would be covered by
presubmit linter checks if build/namespaces were not blacklisted.
R=rmcilroy@chromium.org
Review URL: https://codereview.chromium.org/1410993009
Cr-Commit-Position: refs/heads/master@{#31681}
Create proper initial map for original constructor (new.target) instead of doing prototype transition on the base constructor's initial map. This approach fixes in-object slack tracking for subclass instances.
This CL also fixes subclassing from String.
BUG=v8:3101, v8:3330
LOG=Y
Review URL: https://codereview.chromium.org/1427483002
Cr-Commit-Position: refs/heads/master@{#31680}
Reason for revert:
[Sheriff] Causes layout test failures.
Original issue's description:
> Remove RegExp.multiline accessors.
>
> This is non-standard and not even documented on MDN.
>
> On Firefox, setting RegExp.multiline to true adds the multiline flag to all
> newly created RegExp objects (both from constructor and from literal).
>
> In V8 this has no effect.
>
> Source archaelogy shows that this is from the initial commit.
>
> R=bmeurer@chromium.org
>
> Committed: https://crrev.com/e8f752ce0c2a488e88cd87fe75f3907b4303d0a0
> Cr-Commit-Position: refs/heads/master@{#31673}
TBR=bmeurer@chromium.org,yangguo@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1431433004
Cr-Commit-Position: refs/heads/master@{#31679}
This adds optimized lowering for JSConvertReceiver (in the general case)
and JSToObject in typed lowering. It also uses JSConvertReceiver for
direct calls in typed lowering.
R=mstarzinger@chromium.org
BUG=v8:4493
LOG=n
Review URL: https://codereview.chromium.org/1431543002
Cr-Commit-Position: refs/heads/master@{#31676}
This is non-standard and not even documented on MDN.
On Firefox, setting RegExp.multiline to true adds the multiline flag to all
newly created RegExp objects (both from constructor and from literal).
In V8 this has no effect.
Source archaelogy shows that this is from the initial commit.
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1410993008
Cr-Commit-Position: refs/heads/master@{#31673}
This moves all cctest files for the compiler to live in the same
namespace as the components they are testing. Hence we can avoid the
forbidden using directives pulling in entire namespaces.
From the Google C++ style guide: "You may not use a using-directive to
make all names from a namespace available". This would be covered by
presubmit linter checks if build/namespaces were not blacklisted.
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1424943004
Cr-Commit-Position: refs/heads/master@{#31671}
In order to properly (lazy) bailout when converting the receiver for
sloppy mode functions (using the newly added JSConvertReceiver
operator), we need to have a bailout location right before every call
(also right before every %_Call and %_CallFunction), otherwise if the
JSConvertReceiver just reuses the lazy bailout frame state from the
JSCallFunction node, it will skip the whole function in case of lazy
bailout.
Note it should be impossible to trigger this currently because we do not
yet support AllocationSite code dependencies in TurboFan, which can
trigger this kind of lazy bailout; therefore it's not possible to write
a regression test (yet).
R=yangguo@chromium.org
BUG=v8:4493
LOG=n
Review URL: https://codereview.chromium.org/1425883004
Cr-Commit-Position: refs/heads/master@{#31668}
We have plans to create more ICs, and we are out of bits to represent the Kind
in the flags field of the code object. The InlineCacheState can lose a bit
because it no longer needs the DEFAULT state. That state existed as a way to
detect errors where code incorrectly looked at a vector IC stub's
InlineCacheState instead of correctly determining said state from a glance at
the vector. This really isn't a danger anymore.
So, with the horse trading, we could now represent up to 32 code kinds.
BUG=
Review URL: https://codereview.chromium.org/1427803003
Cr-Commit-Position: refs/heads/master@{#31666}
This fixes [NAMED|KEYED]_SUPER_PROPERTY_CALL to perform a method call
instead of a function call. The difference is visible for sloppy mode
targets that convert primitive receivers.
R=rossberg@chromium.org
TEST=mjsunit/regress/regress-4525
BUG=v8:4525
LOG=n
Review URL: https://codereview.chromium.org/1419173004
Cr-Commit-Position: refs/heads/master@{#31664}
we may introduce moves that are redundant in the context of
moves on subsequent instructions. Currently, we only detect such
redundancies by allowing moves to skip over Nop instructions (true
nops, with no input/output). We can also skip over other cases, for
example over constant definitions (nop with an output), since whatever
moves happen above it do not influence the instruction's outcome.
We may be able to handle other cases, too - in subsequent CLs.
BUG=
Review URL: https://codereview.chromium.org/1422333003
Cr-Commit-Position: refs/heads/master@{#31662}
This requires copying usage flags from the outer scope to the
arrow scope upon encountering the arrow token.
In order to properly pass-on the calls_eval bit, now record
that bit on script scopes just like everywhere else, and add
necessary code to scopes.cc to handle that change in behavior.
Also factored out scope flag propagation to its own method to
make the call site simple (though note that only the eval
bit makes any difference for arrows).
BUG=v8:4395
LOG=n
Review URL: https://codereview.chromium.org/1423613002
Cr-Commit-Position: refs/heads/master@{#31660}
The fix is to broaden the set of cases for when NeedsHomeObject()
returns true. Note that this is broader than it needs to be (since,
e.g., non-arrow function scopes inside a method can't reference
super). But we don't track the types of inner scopes at the moment,
so this is the best we can do.
R=rossberg@chromium.org
BUG=v8:4522
LOG=n
Review URL: https://codereview.chromium.org/1411093008
Cr-Commit-Position: refs/heads/master@{#31659}
This refactors the handling of calls of type Call::PROPERTY_CALL to
super properties in AstGraphBuilder::VisitCall. It ensures that the
operand stack is kept in sync with full-codegen so that deopts while
evaluating sub-expressions behave as expected.
R=rossberg@chromium.org
TEST=mjsunit/regress/regress-4521
BUG=v8:4521
LOG=n
Review URL: https://codereview.chromium.org/1426893003
Cr-Commit-Position: refs/heads/master@{#31652}
For..in introduces 3 new bytecodes ForInPrepare, ForInNext, and
ForInDone to start a for..in loop, get the next element, and check if
the loop is done.
For..in builds upon new LoopBuilder constructs for conditionally
breaking and continuing during iteration: BreakIf{Null|Undefined}
and ContinueIf{Null|Undefined}. New conditional jump bytecodes
support this succinctly: JumpIfNull and JumpIfUndefined.
Add missing check to BytecodeLabel that could allow multiple
forward referencess to the same label which is not supported.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1422033002
Cr-Commit-Position: refs/heads/master@{#31651}
Many places in the JavaScript standard library are changed in ES2015 from
getting an integer using ToUint32 to using ToLength. This patch stages
the flag turning on those new semantics.
BUG=v8:3087,v8:4244
LOG=Y
R=adamk
Review URL: https://codereview.chromium.org/1426673003
Cr-Commit-Position: refs/heads/master@{#31641}
Rename ZoneTypeCache to TypeCache and use a single shared (immutable)
instance consistently to cache the most commonly used types. Also serves
as a chokepoint for defining those types, so we don't repeat the
definition (and possible bugs) in various places.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1409763004
Cr-Commit-Position: refs/heads/master@{#31631}
Float(32|64)Min:
// (a < b) ? a : b
fcmp da, db
fcsel dd, da, db, lo
Float(32|64)Max:
// (b < a) ? a : b
fcmp db, da
fcsel dd, da, db, lo
BUG=
Review URL: https://codereview.chromium.org/1360603003
Cr-Commit-Position: refs/heads/master@{#31621}
Adds support for delete operator, it's implementation and tests.
Adds tests for the following unary operators
-BitwiseNot
-Add
-Sub
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1410953003
Cr-Commit-Position: refs/heads/master@{#31620}
When == is invoked on a Symbol or SIMD vector and an object, the object should
be converted to a primitive with ToPrimitive and then compared again. This means,
for example, that for a Symbol or SIMD vector s, s == Object(s). This patch makes
that change in the implementation of ==. Only the runtime function needed to be
changed, as the code stubs and compiler specializations don't operate on Symbols
or SIMD vectors, and on these types, a fallback to the runtime function is always
used.
BUG=v8:3593
LOG=Y
R=adamk
Review URL: https://codereview.chromium.org/1421413002
Cr-Commit-Position: refs/heads/master@{#31614}
This fixes a missing SSA-renaming of the callee value used in the frame
state of a call node. An OSR-entry within do-expressions contained in
one of the argument expression can trigger that renaming.
R=rossberg@chromium.org
TEST=mjsunit/regress/regress-crbug-546968
BUG=chromium:546968
LOG=n
Review URL: https://codereview.chromium.org/1430483002
Cr-Commit-Position: refs/heads/master@{#31613}
Scavenger should not attempt to visit ArrayBuffer's storage, it is a
user-supplied pointer that may have any alignment. Visiting it, may
result in a crash.
BUG=
R=jochen
Review URL: https://codereview.chromium.org/1406133003
Cr-Commit-Position: refs/heads/master@{#31611}
Reason for revert:
The test failure was unrelated; relanding.
Original issue's description:
> Revert of Check that array length stays a safe integer in Array.prototype.push (patchset #7 id:120001 of https://codereview.chromium.org/1428483002/ )
>
> Reason for revert:
> Caused for-in-opt test to fail
>
> Original issue's description:
> > Check that array length stays a safe integer in Array.prototype.push
> >
> > This patch adds a check in Array.prototype.push to assert that the new
> > length does not become greater than 2**53-1. Such a length would be
> > dangerous because integer arithmetic becomes imprecise after the
> > boundary. The check is also required by a test262 test.
> >
> > R=adamk
> > LOG=Y
> > BUG=v8:3087
> >
> > Committed: https://crrev.com/e68adf4548dd101dc08fcbff14444152fb1b7fe7
> > Cr-Commit-Position: refs/heads/master@{#31588}
>
> TBR=adamk@chromium.org
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=v8:3087
>
> Committed: https://crrev.com/78abedb94431a233842fcb2f7a910805a05bed09
> Cr-Commit-Position: refs/heads/master@{#31590}
TBR=adamk@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:3087
Review URL: https://codereview.chromium.org/1424823005
Cr-Commit-Position: refs/heads/master@{#31610}
Previously ChangeLowering would always box float64 values when going to
tagged representation, but that introduces a lot of deoptimizer loops
and polymorphism into TurboFan, which is unfortunate and unnecessary.
This adds some logic to ChangeFloat64ToTagged to try harder to create a
Smi when going from Float64 to Tagged, instead of always allocating a
HeapNumber. This might need some additional tweaking, but at least it
makes it possible to start comparing TurboFan and Crankshaft for some
regular JavaScript.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1420913003
Cr-Commit-Position: refs/heads/master@{#31609}
Full-codegen prepared for the bailout in the wrong place, causing side
effects to be replayed when they shouldn't. Crankshaft and Turbofan are
in agreement about where the deopt should jump to.
TEST=mjsunit/for-in-opt
R=jarin@chromium.org
BUG=v8:4381
LOG=y
Review URL: https://codereview.chromium.org/1413923005
Cr-Commit-Position: refs/heads/master@{#31607}
Up until now, if one wanted to specify an explicit stack location or register as an operand for an instruction, it had to also be
explicitly associated with a virtual register as a so-called
FixedRegister or FixedStackSlot.
For the implementation of tail calls, the plan is to use the gap
resolver needs to shuffle stack locations from the caller to the
tail-called callee. In order to do this, it must be possible to
explicitly address operand locations on the stack that are not
associated with virtual registers.
This CL introduces ExplictOperands, which can specify a specific
register or stack location that is not associated with virtual
register. This will allow tail calls to specify the target
locations for the necessary stack moves in the gap for the tail
call without the core register allocation having to know about
the target of the stack moves at all.
In the process this CL:
* creates a new Operand kind, ExplicitOperand, with which
instructions can specify register and stack slots without an
associated virtual register.
* creates a LocationOperand class from which AllocatedOperand and
ExplicitOperand are derived and provides a common interface to
get Register, DoubleRegister and spill slot information.
* removes RegisterOperand, DoubleRegisterOperand,
StackSlotOperand and DoubleStackSlotOperand, they are subsumed
by LocationOperand.
* addresses a cleanup TODO in AllocatedOperand to reduce the
redundancy of AllocatedOperand::Kind by using machine_type() to
determine if an operand corresponds to a general purpose or
double register.
BUG=v8:4076
LOG=n
Review URL: https://codereview.chromium.org/1389373002
Cr-Commit-Position: refs/heads/master@{#31603}
This introduces a JSConvertReceiver operator to model the implicit
conversion of receiver values for sloppy callees. It is used by the
JSInliner for now, but can also be used to model direction function
calls that bypass call stubs.
Also note that a hint is passed to said operator whenever the source
structure constrains the receiver value type. This hint allows for
optimizations in the lowering of the operator.
The underlying specification in ES6, section 9.2.1.2 is the basis for
this implementation.
R=bmeurer@chromium.org
TEST=mjsunit/compiler/receiver-conversion
BUG=v8:4493, v8:4470
LOG=n
Review URL: https://codereview.chromium.org/1412223015
Cr-Commit-Position: refs/heads/master@{#31598}
Currently we still (mis)used some machine operators in typed lowering
(namely Word32Or, Word32Xor and Word32And). But these operators are
"polymorphic" in the signedness of their inputs and output, hence the
representation selection (and thereby simplified lowering) was unable to
figure out whether a bitwise operation that was seen would produce an
unsigned or a signed result. If such nodes also have frame state uses,
the only safe choice was float64, which was not only a lot less ideal,
but also the main cause of the for-in related deoptimizer loops.
Adding dedicated NumberBitwiseOr, NumberBitwiseAnd and NumberBitwiseXor
simplified operators not only gives us precise (and correct) typing for
the bitwise operations, but also allows us to actually verify the graph
properly after typed lowering.
Drive-by-fix: Remove the double-to-smi magic from the Deoptimizer, which
is responsible for various deopt-loops in TurboFan, and is no longer
needed with the addition of the NumberBitwise operators.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1422213002
Cr-Commit-Position: refs/heads/master@{#31594}
With ES6 21.2.5.8, step 13, we no longer have to keep up the illusion
that matching and calling replace function is interleaved. This is
observable through unspec'ed static properties such as RegExp.$1.
Last match info not working yet.
R=littledan@chromium.org
Review URL: https://codereview.chromium.org/1418703003
Cr-Commit-Position: refs/heads/master@{#31593}
Reason for revert:
Caused for-in-opt test to fail
Original issue's description:
> Check that array length stays a safe integer in Array.prototype.push
>
> This patch adds a check in Array.prototype.push to assert that the new
> length does not become greater than 2**53-1. Such a length would be
> dangerous because integer arithmetic becomes imprecise after the
> boundary. The check is also required by a test262 test.
>
> R=adamk
> LOG=Y
> BUG=v8:3087
>
> Committed: https://crrev.com/e68adf4548dd101dc08fcbff14444152fb1b7fe7
> Cr-Commit-Position: refs/heads/master@{#31588}
TBR=adamk@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:3087
Review URL: https://codereview.chromium.org/1418093007
Cr-Commit-Position: refs/heads/master@{#31590}
This patch adds a check in Array.prototype.push to assert that the new
length does not become greater than 2**53-1. Such a length would be
dangerous because integer arithmetic becomes imprecise after the
boundary. The check is also required by a test262 test.
R=adamk
LOG=Y
BUG=v8:3087
Review URL: https://codereview.chromium.org/1428483002
Cr-Commit-Position: refs/heads/master@{#31588}
- inner_scope_uses_arguments_ was completely unused
- The public accessor for contains_with() was not called
- inside_with() had helper methods on Parser and PatternRewriter, but was
only called in one place.
Review URL: https://codereview.chromium.org/1409253007
Cr-Commit-Position: refs/heads/master@{#31587}
Adds support for loading from and storing to outer context
variables. Also adds support for declaring functions on contexts and
locals. Finally, fixes a couple of issues with StaContextSlot where
we weren't emitting the write barrier and therefore would crash in the
GC.
Also added code so that --print-bytecode will output the
function name before the bytecodes, and replaces MachineType with StoreRepresentation in RawMachineAssembler::Store and updates tests.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1425633002
Cr-Commit-Position: refs/heads/master@{#31584}
Adds support and tests for conditional (ternary) expressions.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1417053004
Cr-Commit-Position: refs/heads/master@{#31575}
Introduce new typing rules for LoadField[Map], which try to take into
account stable map information if the object either has type Constant or
type Class. If the map of the object is stable but can transition we
have to introduce a code dependency in the Typer to make sure that the
information (the Constant type we infer for LoadField[Map]) is valid
(and stays valid).
This also settles the policy for depending on map stability: The
definition can introduce any number of maps, without having to pay
attention to stability (i.e. you can always use Type::Class to introduce
a map that is propagated along the value edges), and the use site is
responsible for checking that the type information is valid before using
it. I.e. if you use stable map information, you'll have to add a
stability dependency (or make sure the map cannot transition).
Drive-by-improvement: Add ReferenceEqualTyper which takes input types
into account for improved constant folding.
Drive-by-fix: Apply policy mentioned above to JSNativeContextSpecialization.
R=jarin@chromium.org, rossberg@chromium.org
BUG=v8:4470
LOG=n
Review URL: https://codereview.chromium.org/1410953006
Cr-Commit-Position: refs/heads/master@{#31567}
From the Google C++ style guide: "You may not use a using-directive to
make all names from a namespace available". This would be covered by
presubmit linter checks if build/namespaces were not blacklisted.
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1410073004
Cr-Commit-Position: refs/heads/master@{#31565}
This fixes the representation type for values in JSArray::length fields
when JSNativeContextSpecialization lowers loads. Only arrays with fast
elements kind are guaranteed to have a Smi represented length.
R=bmeurer@chromium.org
TEST=mjsunit/regress/regress-4515
BUG=v8:4515, v8:4493, v8:4470
LOG=n
Review URL: https://codereview.chromium.org/1410393006
Cr-Commit-Position: refs/heads/master@{#31558}
The reason is when native_context_specialization flag is ture, X87 turbofan
will hit the known issue that X87 will change a sNaN to qNaN by default. And
then it will fail when bit-comparing the source (sNaN) and the result (qNaN).
reland https://codereview.chromium.org/1414733004/.
BUG=
Review URL: https://codereview.chromium.org/1419573007
Cr-Commit-Position: refs/heads/master@{#31552}
Reason for revert:
because of merge mistake, "regress/" is missed when skipping one test case for X87.
"regress/" will be added when relanding it.
Original issue's description:
> X87: disable the regress-undefined-nan test case for x87.
>
> The reason is when native_context_specialization flag is ture, X87 turbofan
> will hit the known issue that X87 will change a sNaN to qNaN by default. And
> then it will fail when bit-comparing the source (sNaN) and the result (qNaN).
>
> BUG=
>
> Committed: https://crrev.com/b3c719ebbad6c87afefa33a7d0b3f412b2e304db
> Cr-Commit-Position: refs/heads/master@{#31530}
TBR=bmeurer@chromium.org,weiliang.lin@intel.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1417303005
Cr-Commit-Position: refs/heads/master@{#31543}
For some reason, the DisableCrankshaft() in ast-numbering.cc does not always
prevent crankshaft from happening. Bailout here rather than asserting an
unreachable condition.
BUG=546967, v8:4488
LOG=N
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1414713004
Cr-Commit-Position: refs/heads/master@{#31537}
The reason is when native_context_specialization flag is ture, X87 turbofan
will hit the known issue that X87 will change a sNaN to qNaN by default. And
then it will fail when bit-comparing the source (sNaN) and the result (qNaN).
BUG=
Review URL: https://codereview.chromium.org/1414733004
Cr-Commit-Position: refs/heads/master@{#31530}
This patch switches sloppy-mode code from legacy const semantics
to ES2015 semantics. It is unknown how much of the web will be
broken by this; likely the patch will have to be reverted before
a branch happens.
BUG=v8:3739
LOG=Y
R=rossberg,adamk
Review URL: https://codereview.chromium.org/1420223003
Cr-Commit-Position: refs/heads/master@{#31525}
This patch only treats non-private symbols as valid feedback, thus
avoiding the need to switch to Oddballs for the feedback sentinels
and avoiding breaking the use of private own symbols.
Crankshaft will also optimize these symbol loads into a named load,
just as it does for string keyed loads with type feedback.
BUG=
Review URL: https://codereview.chromium.org/1415333003
Cr-Commit-Position: refs/heads/master@{#31496}
