Now that WebGPU ingests WGSL instead of SPIR-V,
there is no need to be so strict about the memory model.
Allow any memory model that is already allowed by Vulkan 1.0,
either directly or via an existing.
Fixes#3529
* Make BasicBlock::reachable() only consider static reachability
* Fix reachability calculation to be independent of block order
* add tests
* Add validation that input/output locations are assigned correctly
* Account for component assignment
* Account for 4 components per location and track the combined
coordinate
* Account for multiple output indexes
* handle specifically arrayed variables
* Arrayed variables that specify a component get locations determined
per index of the array for the sub type
* Added tests that check locations and components can be assigned
to interleave an array's locations and components
* Fix up which interfaces are allowed to be arrayed for various shader
stages based on glslang
ImageGatherBiasLodAMD makes it possible to use the Bias and Lod image
operands with OpImageGather and OpImageSparseGather. This commit makes
sure the validator checks for that capability before reporting errors
and adds a few positive tests.
According to SPV_AMD_shader_image_load_store_lod spec, Lod operand is
valid with OpImageRead, OpImageWrite, or OpImageSparseRead if the
extension is enabled.
Fixes#3139
* If the header of the construct is also a merge block, jump to the
associated header instead of the immediate dominator
* prevents spurious failures from unrelated constructs
* new tests
* Allow OpExtInst for DebugInfo between secion 9 and 10
Fixes#3086
* Handle spirv-opt errors on DebugInfo Ext
* Add IR Loader test
* Fix ir loader bug
* Handle DebugFunction/DebugTypeMember forward reference
* Add test cases (forward reference to function)
* Support old DebugInfo extension
* Validate local debug info out of function
Add support for SPV_KHR_non_semantic_info
This entails a couple of changes:
- Allowing unknown OpExtInstImport that begin with the prefix `NonSemantic.`
- Allowing OpExtInst that reference any of those sets to contain unknown
ext inst instruction numbers, and assume the format is always a series of IDs
as guaranteed by the extension.
- Allowing those OpExtInst to appear in the types/variables/constants section.
- Not stripping OpString in the --strip-debug pass, since it may be referenced
by these non-semantic OpExtInsts.
- Stripping them instead in the --strip-reflect pass.
* Add adjacency validation of non-semantic OpExtInst
- We validate and test that OpExtInst cannot appear before or between
OpPhi instructions, or before/between OpFunctionParameter
instructions.
* Change non-semantic extinst type to single value
* Add helper function spvExtInstIsNonSemantic() which will check if the extinst
set is non-semantic or not, either the unknown generic value or any future
recognised non-semantic set.
* Add test of a complex non-semantic extinst
* Use DefUseManager in StripDebugInfoPass to strip some OpStrings
* Any OpString used by a non-semantic instruction cannot be stripped, all others
can so we search for uses to see if each string can be removed.
* We only do this if the non-semantic debug info extension is enabled, otherwise
all strings can be trivially removed.
* Silence -Winconsistent-missing-override in protobufs
* Validate that if a construct contains a header and it's merge is
reachable, the construct also contains the merge
* updated block merging to not merge into the continue
* update inlining to mark the original block of a single block loop as
the continue
* updated some tests
* remove dead code
* rename kBlockTypeHeader to kBlockTypeSelection for clarity
Re-enable OpReadClockKHR validation
Fixes#2952
* Refactor some common scope validation
* Perform correct validation for scope in OpReadClockKHR
* Scope must be Subgroup or Device
* new tests
* Validate that selections are structured
WIP
* new checks that switch and conditional branch are proceeded by a
selection merge where necessary
* Don't consider unreachable blocks
* Add some tests
* Changed how labels are marked as seen
* Moved check to more appropriate place
* Labels are now marked as seen when there are encountered in a
terminator instead of when the block is checked
* more tests
* more tests
* Method comment
* new test for a bad case
* When input or result is a pointer type also allow 32-bit integer
vectors for the other type
* Relaxation only applies to SPIR-V 1.5 or in the presence of
SPV_KHR_physical_storage_buffer
* new tests
* Vulkan specific checks
* storage buffer variables must be structs or arrays of structs
* storage buffer struct must be Block decorated
* uniform struct must be Block or BufferBlock decorated
* new tests
* Ensure same enum values have consistent extension lists
* val: fix checking of capabilities
The operand for an OpCapability should only be
checked for the extension or core version.
The InstructionPass registers a capability, and all its implied
sub-capabilities before actually checking the operand to an
OpCapability.
* Add basic support for SPIR-V 1.5
- Adds SPV_ENV_UNIVERSAL_1_5
- Command line tools default to spv1.5 environment
- SPIR-V 1.5 incorporates several extensions. Now the disassembler
prefers outputing the non-EXT or non-KHR names. This requires
updates to many tests, to make strings match again.
- Command line tests: Expect SPIR-V 1.5 by default
* Test validation of SPIR-V 1.5 incorporated extensions
Starting with 1.5, incorporated features no longer require
the associated OpExtension instruction.
Fixes#2793
* Don't special case matrix validation compared to other composites
* just check the constituents are constants or undefs
* later checking validates the column type
* new test
* Process OpDecorateId in ADCE
When there is an OpDecorateId instruction that is live,
the ids that is references must be kept live. This change
adds them to the worklist.
I've also updated a validator check to allow OpDecorateId
to be able to apply to decoration groups.
Fixes#1759.
* Remove dead code.
This change refactors all storage class validation for atomics
to reflect the similar refactoring in the specification.
It is currently not possible to write a test for the check
rejecting Generic in an OpenCL 1.2 environment as the required
GenericPointer capability isn't allowed there. I've decided
to keep the check nonetheless to guard against the capability
becoming available without the rules for atomics being updated.
The ID changes in existing tests aren't ideal but introducing
names drags in a substantial refactoring of this file.
Contributes to #2595.
Signed-off-by: Kevin Petit <kevin.petit@arm.com>
Fixes#2669
* Check capabilities when validating variables
* validate load and store types
* Constant check
* Don't checks pointers for stores, constants and loads
* Validate composite instructions
* Validate conversions for 8- and 16-bit limited types
* Unified tests and expanded them
* Disallow OpCopyMemory
* new tests and update old tests
* Can only be used with Vulkan memory model
* Can only be used with atomics
* Bit setting must match for compare exchange opcodes
* Updated memory semantics checks to allow constant instructions
generally with CooperativeMatrixNV
Also add a Builtin test generator variant that takes
capabilities and extensions.
Tests
- verify that the SMCountNV, SMIDNV, WarpsPerSMNV, and WarpIDNV Builtins are
accepted as Inputs in Vertex, Fragment, TessControl, TessEval, Geometry,
and Compute.
- verify that the SMCountNV, SMIDNV, WarpsPerSMNV, and WarpIDNV Builtins are
accepted as Inputs in MeshNV and TaskNV shaders.
- verify that the SMCountNV, SMIDNV, WarpsPerSMNV, and WarpIDNV Builtins are
accepted as Inputs in the 6 ray tracing stages
- verify that the SMCountNV, SMIDNV, WarpsPerSMNV, and WarpIDNV Builtins are
NOT accepted as Outputs.
- verify that the SMCountNV, SMIDNV, WarpsPerSMNV, and WarpIDNV Builtins are
NOT accepted as non-scalar integers (f32, uvec3)
- verify that the SMCountNV, SMIDNV, WarpsPerSMNV, and WarpIDNV Builtins are
NOT accepted as non-32-bit integers (u64)
Fixes#2604
* Allow selection constructs to branch to the nearest selection merge
whose header is terminated by an OpSwitch
* Cleanup break and continue checks generally
* add tests
It is currently not possible to use an Image Format that is
not Unknown without requiring a capability forbidden by the
OpenCL environment. As such the validation of Image Format
currently leans on capability validation entirely.
Fixes#2592.
Signed-off-by: Kevin Petit <kevin.petit@arm.com>
Validate structured exits from constructs
* Add checks that exits from a construct are valid
* Add Construct::IsStructuredExit()
* uses specific rules for each type of construct
* Added a test and check for #2213
* Adding tests for bad loop and continue exits
* Fix identification of continue block that prevented some selections
from having any blocks
* Make pointers to logically matching types interchangeable with option.
DXC will be generating code where the function parameters will be a more
generic type that the actual parameter. They should be logically
matching and the decorations of the actual parameter must be a superset
of the decorations of the formal parameter.
We want to accept this code with an options so that spirv-opt can then
inline and fix the type mismatch. We will accept this under a new
options `--before-hlsl-legalization`.
The new option will also imply `relax-logical-pointer` so that HLSL
frontends will need to use just the one more generic option.
Moved the |LogicallyMatches| to the validation state to make it
available in more places. Also added a parameter to have it check the
decorations. I did not do a separate function for the decorations
because checking the decorations involves making sure the types
logically match anyway.
Fixes#2535
* Use grammar last version
Fixes#2560
* Parse last version and use it in checks
* Update grammar header generation
* Fix NonWritable tests
* Fix check and add specific tests
Fixes#2555
* Fix a bug in validation where interfaces were considered non-unique
between different entry points targeting the same function
* added a test
* Update private to local pass to remove localized private variables
from entry point interfaces
* added tests
* SPIR-V 1.4 headers, add SPV_ENV_UNIVERSAL_1_4
* Support --target-env spv1.4 in help for command line tools
* Support asm/dis of UniformId decoration
* Validate UniformId decoration
* Fix version check on instructions and operands
Also register decorations used with OpDecorateId
* Extension lists can differ between enums that match
Example: SubgroupMaskEq vs SubgroupMaskEqKHR
* Validate scope value for Uniform decoration, for SPIR-V 1.4
* More unioning of exts
* Preserve grammar order within an enum value
* 1.4: Validate OpSelect over composites
* Tools default to 1.4
* Add asm/dis test for OpCopyLogical
* 1.4: asm/dis tests for PtrEqual, PtrNotEqual, PtrDiff
* Basic asm/Dis test for OpCopyMemory
* Test asm/dis OpCopyMemory with 2-memory access
Add asm/dis tests for OpCopyMemorySized
Requires grammar update to add second optional memory access operand
to OpCopyMemory and OpCopyMemorySized
* Validate one or two memory accesses on OpCopyMemory*
* Check av/vis on CopyMemory source and target memory access
This is a proposed rule. See
https://gitlab.khronos.org/spirv/SPIR-V/issues/413
* Validate operation for OpSpecConstantOp
* Validate NonWritable decoration
Also permit NonWritable on members of UBO and SSBO.
* SPIR-V 1.4: NonWrtiable can decorate Function and Private vars
* Update optimizer CLI tests for SPIR-V 1.4
* Testing tools: Give expected SPIR-V version in message
* SPIR-V 1.4 validation for entry point interfaces
* Allow only unique interfaces
* Allow all global variables
* Check that all statically used global variables are listed
* new tests
* Add validation fixture CompileFailure
* Add 1.4 validation for pointer comparisons
* New tests
* Validate with image operands SignExtend, ZeroExtend
Since we don't actually know the image texel format, we can't fully
validate. We need more context.
But we can make sure we allow the new image operands in known-good
cases.
* Validate OpCopyLogical
* Recursively checks subtypes
* new tests
* Add SPIR-V 1.4 tests for NoSignedWrap, NoUnsignedWrap
* Allow scalar conditions in 1.4 with OpSelect
* Allows scalar conditions with vector operands
* new tests
* Validate uniform id scope as an execution scope
* Validate the values of memory and execution scopes are valid scope
values
* new test
* Remove SPIR-V 1.4 Vulkan 1.0 environment
* SPIR-V 1.4 requires Vulkan 1.1
* FIX: include string for spvLog
* FIX: validate nonwritable
* FIX: test case suite for member decorate string
* FIX: test case for hlsl functionality1
* Validation test fixture: ease debugging
* Use binary version for SPIR-V 1.4 specific features
* Switch checks based on the SPIR-V version from the target environment
to instead use the version from the binary
* Moved header parsing into the ValidationState_t constructor (where
version based features are set)
* Added new versions of tests that assemble a 1.3 binary and validate a
1.4 environment
* Fix test for update to SPIR-V 1.4 headers
* Fix formatting
* Ext inst lookup: Add Vulkan 1.1 env with SPIR-V 1.4
* Update spirv-val help
* Operand version checks should use module version
Use the module version instead of the target environment version.
* Fix comment about two-access form of OpCopyMemory
Recent change to the spec restricted the valid values for Memory
Semantics in OpAtomics* in the WebGPU env. Implementing enforcing
these changes.
Fixes#2499
Fixes#2470
* Only require the *WithoutFormat capabilities for Unknown image reads
and writes in the Vulkan environment
* update tests and add new vulkan specific tests
Fixes#2488
* Validator doesn't identify back-edge of the loop, so the merge is
never set
* Construct::blocks() has safe uses of `merge` so the assert can be
removed
* Added a test
Changing the stored value for a sampled image consumer to be the
instruction instead of result ID, since not all instructions have
result IDs. Using result IDs led to a potential crash when using
OpReturnValue, which doesn't have a result ID. OpReturnValue is not a
legal consumer, but the validator needs to look at the instruction to
determine this, thus storing the pointer to the instruction, instead
of trying to fetch the pointer using the instruction.
Issue #1528 covers fixing the check.
Fixes#2463
If relax-logical-pointer is enabled, this commit makes Validator
accept function param even when its Storage Class is different from
the expected one.
Related to #2423, #2430
In WebGPU all blocks are required to be reachable, unless they are one of two
specific degenerate cases for merge-block or continue-target. This PR adds in
checking for these conditions.
Fixes#2068
In relaxed addressing mode, we want to accept non memory objects
because this is a very natural translation of hlsl. It should be fixed
by legalization by inlining the calls.
* Remove use of deprecated googletest macro
INSTANTIATE_TEST_CASE_P has been deprecated. We need to use
INSTANTIATE_TEST_SUITE_P instead.
* Remove extra commas from test suites.
This CL adds in the specific checks required for WebGPU, enables
running the builtin checks for WebGPU, and refactors the existing
testing infrastructure to support testing the new checks.
This PR is part of resolving #2276
In a recent PR, we allowed a forward reference for the element type in
an array declaration. However, we do not have other check to make sure
the forward reference is a pointer type first reference in
OpTypeForawrdPointer. We add that check.
Fixes https://crbug.com/920074.
Broader check for ids that require a type
Fixes https://crbug.com/911700
* Adds a broader check for when id operands require a type
* updated a few tests
* added a test to catch the original issue
* Added additional changes for the new AccelerationStructureNV type.
* Added NVIDIA ray tracing storage classes for checking in ValidateVariable.
* For NVIDIA ray tracing storage classes added test to load bool type (allowed) in new storage class.
There is inconsistencies between the different specs about whether or
not this capability is required/allowed, so tooling like glslang
currently ignores it. Once this is resolved the check and test can be
re-enabled.
* Only check for binding and descriptor set on variables that are
statically used by an entry point
* updated tests and added a couple new ones
* new method for collecting entry points that statically reference an
id
* Validate OpForwardPointer
The validator does not have a a check that OpForwardPointer is giving
a forward reference to a pointer type. We add that check.
https://crbug.com/910852
* Remove more specialized check.
There was a check that the forward pointer is actually a poiner type,
but it was only done if it was used in a struct. This was too specific.
Remove it in favour of the more general check that was added.
* Format
* Check the storage type in OpTypeForwardPointer
* Fix typo is test case epxected results.
Fixes#2147
* Checks that device scope is not used for availability and visibility
operations unless VulkanMemoryModelDeviceScopeKHR capability is present
* implemented for atomics, barriers and memory instructions currently
This CL changes the id/name output from the validator to always use a
consistent id[%name] style. This removes the need for getIdOrName. The
name lookup is changed to use the NameMapper so the output is consistent
with what the disassembler will produce.
Fixes#2137
* Validate uses of ids defined in unreachable blocks.
For some reason we do not make sure the uses of ids that are defined
in unreachable blocks are dominated by their def. This is causing
invalid code to pass the validator.
Fixes#2143
* Add test for unreachable code after a return.
We want to allow code like:
```
void foo() {
a = ...;
...
return; // for debugging
<use of a>;
...
}
```
I added a test to make sure that something like this is still accepted
by the validator.
* Add test for unreachable def used in phi.
Fixes#2104
* Checks the rules for logical addressing and variable pointers
* Has an out for relaxed logical pointers
* Updated PassFixture to expose validator options
* enabled relaxed logical pointers for some tests
* New validator tests
Restrict capabilities to WebGPU spec
This covers whitelisting Matrix, Shader, Sampled1D, Image1D,
DerivativeControl, and ImageQuery. These are the allowed capabilities
that don't require an extension. Whitelisting VulkanMemoryModelKHR
will be handled by whitelisting its extension in a seperate patch.
Fixes#2101
Make sure that initialized variable have correct storage class
For WebGPU and Vulkan environments, variables must have the storage
class; Output, Private, or Function, if they have an initializer.
Fixes#2071
Adding validation that the addressing declared by OpMemoryModel is
Logical and the memory model declared is VulkanKHR. Updating a bunch
of tests that were broken by this.
Fixes#2060
Check forbidden Annotation instructions for WebGPU env
From the WebGPU SPIR-V Execution Enviroment spec:
OpDecorationGroup, OpGroupDecorate, OpGroupMemberDecorate are not
allowed.
Fixes#2062
Validate that debugging instructions are not present for WebGPU
For WebGPU execution environments, check that all of the debug
instructions have already been stripped before validation.
Fixes#2063
We had a test that checks that a spirv binary where the depth of the
deepest nested construct is just below the default limit. This test
would take a long time causing a timeout in some builds. We are
questioning the value of the test since we already have a test that can
tell us if we are within a custom limit. We will remove the test.
Add tests for matrix type data rule validation
This covers the data rules for matrix types specified in the SPIR-V
spec, section 2.16.1, and the WebGPU SPIR-V Execution Environment
spec.
Fixes#2065Fixes#2080
Ban sequentially consistent with VulkanKHR
* Added validation check that SequentiallyConsistent memory semantics
are not used if the memory model is VulkanKHR
* Added tests
* Fixed a bug in evaluating constant 32-bit integers and updated some
handling to avoid inferring a value from a spec constant default
Remaining memory semantics validation
* Adds checks that OutputMemoryKHR, MakeAvailableKHR and MakeVisibleKHR
are only used if the VulkanMemoryModelKHR capabailty is present
* Added checks that MakeAvailableKHR requires release semantics
* Added checks that MakeVisibleKHR requires acquire semantics
* Added checks that MakeAvailableKHR and MakeVisibleKHR require a
storage class
Adds validator option to specify scalar block layout rules.
Both VK_KHR_relax_block_layout and VK_EXT_scalar_block_layout can be
enabled at the same time. But scalar block layout is as permissive
as relax block layout.
Also, scalar block layout does not require padding at the end of a
struct.
Add test for scalar layout testing ArrayStride 12 on array of vec3s
Cleanup: The internal getSize method does not need a round-up argument,
so remove it.
From the Vulkan 1.1 spec 14.5.2:
Variables identified with the Uniform storage class are used to access
transparent buffer backed resources. Such variables must be typed as
OpTypeStruct, or an array of this type.
Fixes#1949
Validate variable types for UniformConstant storage in Vulkan (#2008)
From the Vulkan 1.1 spec 14.5.2:
Variables identified with the UniformConstant storage class are used
only as handles to refer to opaque resources. Such variables must be
typed as OpTypeImage, OpTypeSampler, OpTypeSampledImage, or an array
of one of these types.
Fixes#2008
The Vulkan specification does not permit use of the VertexId and
InstanceId BuiltIn decorations, so add a check to ensure they are not
being used when the target environment is Vulkan.
* Validate the id bound.
Validates that the id bound for the module is not larger than the max id
bound. Also adds an option to set the max id bound. Allows the
optimizer option to set the max id bound to also set the id bound for
the validation run done by the optimizer.
Fixes#2030.
The SPV_KHR_8bit_storage extension does not permit 8-bit integers to be
cast directly to floating point types. We are seeing shaders in the
wild, being produced by toolchains like glslang, that are generating
invalid SPIR-V.
This change adds validation to check for the patterns not permitted, and
some tests that expose the failure.
In logical addressing mode, we are not allowed to generate variables
pointers. There is already a check for OpSelect. However, OpPhi
and OpPtrAccessChain are not checked to make sure it does not
generate an variable pointer. I've added those checks.
Fixes#1957.
* MakePointerVisibleKHR cannot be used with OpStore
* MakePointerAvailableKHR cannot be used with OpLoad
* MakePointerAvailableKHR and MakePointerVisibleKHR both require
NonPrivatePointerKHR
* NonPrivatePointerKHR is limited to a subset of storage classes
* many tests
* Validation checks for new image operands MakeTexelAvailableKHR and
MakeTexelVisibleKHR
* added tests
* Tests that NonPrivateTexelKHR is accepted for all image operands
Updating test environments
* fixed build errors
* changed image types for *FetchSuccess tests to use a type defined in
1.3 shader body
This commit checks the following when Shader capability exists:
"The FPRoundingMode decoration can be applied only to a width-only
conversion instruction that is used as the Object operand of an
OpStore storing through a pointer to a 16-bit floating-point object
in the StorageBuffer, Uniform, PushConstant, Input, or Output
Storage Classes.".
This commit will change the message for unknown extensions from an error
to a warning.
Code was added to limit the number of warning messages so that consummer
of the messages are not overwhelmed. This is standard practice in
compilers.
Many other issues were found at while looking into this. They have been
documented in #1950.
Fixes http://crbug.com/875547.
* Check rules from Execution Mode tables, 2.16.2 and the Vulkan
environment spec
* Allows MeshNV execution model with the following execution modes
* LocalSize, LocalSizeId, OutputPoints and OutputVertices
* Done to not break their validation
OpPhi instruction must appear before all non-OpPhi instructions
except for OpLine. Without this commit, Validator does not check
the case that an OpPhi is preceeded by an OpLine and the OpLine is
preceeded by a non-OpPhi instruction that is not OpLine.
Checked all instructions whose object is OpTypeSampledImage or
OpTypeImage as suggested in #487. OpImageTexelPointer instruction
is missing and others look good. This commit adds only
OpImageTexelPointer.
* Validate all type ids.
The validator does not check if the type of an instruction is actually
a type unless the OpCode has a specific requirement. For example,
OpFAdd is checked, but OpUndef is not.
The commit add a generic check that if there is a type id then the id
defines a type.
http://crbug.com/876694
* Merge other checks for type into new one.
There are a couple check that the type id is a type for specific
opcodes. Those have been mereged into 1.
Small changes to other test cases to make them valid enough for the
purpose of the test.
In the specification of `OpTypeFunction`, it says
> OpFunction is the only valid use of OpTypeFunction.
This commit add a check in the validator for this rule.
A test started to fail because the new check happens before the check
the test case is testing. Updated the test case to still fail the
check it was suppose to fail originally.
http://crbug.com/874571
* Split constant opcode validation out of idUsage and into
validate_constants.cpp
* minor style fixes
* reduced duplication
* fixed an issue with array sizing
When doing the validator checks, an instruction is currently registered
at the end of IdPass. This creates an inconsistency. In IdPass, an
instruction that uses its own result will treat that use as a forward
reference. Then in the following passes it will not because the
definition can be found.
It seems best to update the state after all of the check have been done
for the current instruction. This makes it consistent for all of the
passes.
This makes a different when trying to verify OpTypeStruct.
Fixes https://crbug.com/874372.
* Moved function opcode validation out of idUsage and into new files
* minor style changes
* General opcode checking is in validate_function.cpp
* Execution limitation checking is in
validate_execution_limitations.cpp
* Execution limitations was split into a new pass as it requires other
validation to register those limitations first.
* Changed entry point validation to check storage class of variable
instead of pointer
* added a test
* Moved several checks after opcode validation
* These checks should be able to guarantee individual instructions are
ok
* Updated tests due to reordered checks
* Moved type instruction validation out of validation idUsage into a new
file
* Consolidate type unique pass into new file
* Removed one bad test
* Reworked validation ordering
Fixes#1800
* Refactored duplication of code between OpCopyMemory and
OpCopyMemorySized validation
* Fixed some bugs in OpCopyMemorySized validation
* Replaced asserts with checks
* Added new tests
* Replaced uses in opcode validation of current_function()
* Added non-const accessor to function lookup in ValidationState_t
* Updated a couple bad tests due to check reordering
