The optimizer is able to preserve the interface variables of the
shaders, but that feature has not been exposed to the command line
tool.
This commit adds an option `--preserve-interface` to spirv-opt that will
cause all calls to ADCE to leave the input and output variables, even if
the variable is unused. It will apply regardless of where the option
appears on the command line.
Fixes#5522
Add a new legalization pass to dedupe invocation interlock instructions
DXC will be adding support for HLSL's rasterizer ordered views by using
the SPV_EXT_fragment_shader_interlock_extension. That extension
stipulates that if an entry point has an interlock ordering execution
mode, it must dynamically execute OpBeginInvocationInterlockEXT and
OpEndInvocationInterlockEXT, in that order, exactly once. This would be
difficult to determine in DXC's SPIR-V backend, so instead we will emit
these instructions potentially multiple times, and use this legalization
pass to ensure that the final SPIR-V follows the specification.
This PR uses data-flow analysis to determine where to place begin and
end instructions; in essence, determining whether a block contains or is
preceded by a begin instruction is similar to a specialized case of a
reaching definitions analysis, where we have only a single definition,
such as `bool has_begun = false`. For this simpler case, we can compute
the set of blocks using BFS to determine the reachability of the begin
instruction.
We need to do this for both begin and end instructions, so I have
generalized portions of the code to run both forward and backward over
the CFG for each respective case.
These functions are getting far too complicated to code in SPIRV-Tools
C++. Replace them with import stubs so that the real implementations
can live in Vulkan-ValidationLayers where they belong.
VVL will need to define these functions in spirv and link them to the
instrumented version of the user's shader.
From here on out, VVL can redefine the functions and any data they use
without updating SPIRV-Tools. Changing the function declarations will
still require both VVL and SPIRV-Tools to be updated in lock step.
Currently spirv-link fails if all input files don't use the same
SPIR-V version. Add an option to instead use the highest input
version as the output version. Note that if one of the 'old'
input files uses an opcode that is deprecated in the 'new'
version, the output spirv will be invalid.
This commit adds a new optimization which tries to remove unnecessary
capabilities from a SPIR-V module.
When compiling a SPIR-V module, you may have some dead-code using
features gated by a capability.
DCE will remove this code, but the capability will remain. This means
your module would still require some capability, even if it doesn't
require it. Calling this pass on your module would remove obsolete
capabilities.
This pass wouldn't be enabled by default, and would only be usable
from the API (at least for now).
NOTE: this commit only adds the basic skeleton/structure, and
doesn't mark as supported many capabilities it could support.
I'll add them as supported as I write tests.
Signed-off-by: Nathan Gauër <brioche@google.com>
* SPV_KHR_cooperative_matrix
* Update DEPS with headers
* Update according to review recommendations
* Bugfix and formatting
* Formatting missed or damaged by VS2022
Simplify what we add to user code by moving most of it into a function
that checks both that the descriptor index is in bounds and the
initialization state. Move error logging into this function as
well.
Remove many options to turn off parts of the instrumentation,
because there were far too many permutations to keep working and
test properly.
Combine Buffer and TexBuffer error checking. This requires that VVL
set the length of TexBuffers in the descriptor input state, rather
than relying on the instrumentation code to call OpImageQuerySize.
Since the error log includes the descriptor set and binding numbers
we can use a single OOB error code rather than having 4 per-type
error codes.
Since the error codes are getting renumbered, make them start at 1
rather than 0 so it is easier to determine if the error code was
actually set by the instrumentation.
Split per-DescriptorSet state into separate memory blocks
which are accessed via an array of buffer device addresses.
This is being done to make it easier to update state for a
single DescriptorSet without rebuilding the old giant flat
buffer.
The new data format is documented as comments in
include/spirv-tools/instrument.hpp
This commit adds a C++ wrapper above the current spvBinaryParse
function. I tried to match it 1:1, except for 2 things:
- std::function<>& are used. No more function pointers, allowing
context capture.
- spv_result_t replaced with a boolean, to match other C++ apis.
Callbacks still return a spv_result_t because the underlying implem
relies on that. The convertion from spv_result_t to boolean is only done
at the boundary.
Signed-off-by: Nathan Gauër <brioche@google.com>
This can cause interface incompatibility and should only be done
if ADCE has been applied to the following shader in the pipeline.
For this reason this capability is not available through the CLI
but rather only non-default through the API. This functionality is
intended as part of a larger cross-shader dead code elimination
sequence.
Safe version will only optimize vertex shaders. All other shaders will
succeed without change.
Change --eliminate-dead-input-components to use new safe version.
Unsafe version (allowing non-vertex shaders) currently only available
through API. Should only be used in combination with other optimizations
to keep interfaces consistent. See optimizer.hpp for more details.
Add a flags field at the first offset within this buffer.
Define flags to allow buffer OOB checking to be enabled or
disabled at run time. This is to support VK_EXT_pipeline_robustnes.
This pass eliminates components of output variables that are not stored
to. Currently this just eliminates trailing components of arrays and
structs, all of which are dead.
WARNING: This pass is not designed to be a standalone pass as it can
cause interface incompatibiliies with the following shader in the
pipeline. See the comment in optimizer.hpp for best usage. This pass is
currently available only through the API; it is not available in the CLI.
This commit also fixes a bug in CreateDecoration() which is part of the
system of generating SPIR-V from the Type manager.
This adds two passes to accomplish this: one pass to analyze a shader
to determine the input slots that are live. The second pass is run on
the preceding shader to eliminate any stores to output slots that are
not consumed by the following shader.
These passes support vert, tesc, tese, geom, and frag shaders.
These passes are currently only available through the API.
These passes together with dead code elimination, and elimination of
dead input and output components and variables (WIP), will allow users
to do dead code elimination across shader boundaries.
The always-friendly messages make it harder to debug when the
disassembly is later generated without friendly names.
Additionally, the friendly-name-mapper is slow. Disabling it improves
performance of an ANGLE test that creates numerous shaders by ~5%.
spirv validation require OpFunctionCall with memory object, usually this
is non issue as all the functions are inlined.
This pass deal with some case for
DontInline function. accesschain input operand would be replaced new
created variable
Swift shader needs a way to inline all functions, even those marked as
DontInline. See https://github.com/KhronosGroup/SPIRV-Tools/pull/4471.
This implements the suggestion I made in the PR. We add a pass that
will remove the DontInline function control, so that the inlining passes
will inline them.
SwiftShader will still have to modify their code to add this pass before
the other passes are run.
Add a pass to spread Volatile semantics to variables with SMIDNV,
WarpIDNV, SubgroupSize, SubgroupLocalInvocationId, SubgroupEqMask,
SubgroupGeMask, SubgroupGtMask, SubgroupLeMask, or SubgroupLtMask BuiltIn
decorations or OpLoad for them when the shader model is the ray
generation, closest hit, miss, intersection, or callable shaders. This
pass can be used for VUID-StandaloneSpirv-VulkanMemoryModel-04678 and
VUID-StandaloneSpirv-VulkanMemoryModel-04679 (See "Standalone SPIR-V
Validation" section of Vulkan spec "Appendix A: Vulkan Environment for
SPIR-V").
Handle variables used by multiple entry points:
1. Update error check to make it working regardless of the order of
entry points.
2. For a variable, if it is used by two entry points E1 and E2 and
it needs the Volatile semantics for E1 while it does not for E2
- If VulkanMemoryModel capability is enabled, which means we have to
set memory operation of load instructions for the variable, we
update load instructions in E1, but do not update the ones in E2.
- If VulkanMemoryModel capability is disabled, which means we have
to add Volatile decoration for the variable, we report an error
because E1 needs to add Volatile decoration for the variable while
E2 does not.
For the simplicity of the implementation, we assume that all functions
other than entry point functions are inlined.
* Basic support for SPIR-V 1.6
* Update SPIRV-Headers deps
* Add new environment enum for SPIR-V 1.6
* Make default environment 1.6 for most tools
* Update tests
* Disallow conditional branch with duplicate labels
* Disallow Dim=Buffer with sampled images
* Do not require the non-semantic extension after SPIR-V 1.5
In https://github.com/KhronosGroup/SPIRV-Tools/pull/3110, the strip reflect
pass was changed to also remove all explicitly nonsemantic instructions. This
makes it so that the name of the pass no longer reflects what the pass actually
does. This change renames the pass so that it reflects what the pass actaully does.
The change in
commit 4ac8e5e541
Author: Greg Fischer <greg@lunarg.com>
Date: Wed Sep 15 12:38:34 2021 -0600
Add preserve_interface mode to aggressive_dead_code_elim (#4520)
Broke the C++ ABI for spirv-tools shared libraries on Linux, for not a great reason.
Restore the previous ABI.
To allow querying the range of target environments (to ensure that a
target environment value is within the valid range of the associated
enum), this change adds a maximum value to the spv_target_env
enumeration.
Includes:
- Shift to use of spirv-header extinst.nonsemantic.shader grammar.json
- Remove extinst.nonsemantic.vulkan.debuginfo.100.grammar.json
- Enable all optimizations for Shader.DebugInfo
Also fixes scalar replacement to only insert DebugValue after all
OpVariables. This is not necessary for OpenCL.DebugInfo, but it is
for Shader.DebugInfo.
Likewise, fixes Private-to-Local to insert DebugDeclare after all
OpVariables.
Also fixes inlining to handle FunctionDefinition which can show up
after first block if early return processing happens.
Co-authored-by: baldurk <baldurk@baldurk.org>
This PR is a rebased version of #4479 by James Dong.
---
The primary purpose of this PR is to add the code from my prototype as a PR, for licensing reasons.
The commit history is messy, and the code is not especially clean.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/3196.
Allow LocalSizeId as a way of sizing compute workgroups where the
environment allows it. A command-line switch is also added to force
acceptance even where the environment would not otherwise allow it.
convert-to-sampled-image pass converts images and/or samplers with
given pairs of descriptor set and binding to sampled image.
If a pair of an image and a sampler have the same pair of descriptor
set and binding that is one of the given pairs, they will be
converted to a sampled image. In addition, if only an image has the
descriptor set and binding that is one of the given pairs, it will
be converted to a sampled image as well.
For example, when we have
%a = OpLoad %type_2d_image %texture
%b = OpLoad %type_sampler %sampler
%combined = OpSampledImage %type_sampled_image %a %b
%value = OpImageSampleExplicitLod %v4float %combined ...
1. If %texture and %sampler have the same descriptor set and binding
%combine_texture_and_sampler = OpVaraible %ptr_type_sampled_image_Uniform
...
%combined = OpLoad %type_sampled_image %combine_texture_and_sampler
%value = OpImageSampleExplicitLod %v4float %combined ...
2. If %texture and %sampler have different pairs of descriptor set and binding
%a = OpLoad %type_sampled_image %texture
%extracted_image = OpImage %type_2d_image %a
%b = OpLoad %type_sampler %sampler
%combined = OpSampledImage %type_sampled_image %extracted_image %b
%value = OpImageSampleExplicitLod %v4float %combined ...
This PR adds a new executable spirv-lint with a simple "Hello, world!"
program, along with its associated library and a dummy unit test.
For now, only adds to CMake and Bazel; other build systems will be added
in a future PR.
Issue: #3196
This is based on a legacy commit which installs a local grammar. A
followup commit will change to the grammar in SPIRV-Headers.
Co-authored-by: baldurk <baldurk@baldurk.org>
The new pass will removed interface variable on the OpEntryPoint instruction when they are not statically referenced in the call tree of the entry point.
It can be enabled on the command line using the options `remove-unused-interface-variables`.
* Initial support for SPV_KHR_integer_dot_product
- Adds new operand types for packed-vector-format
- Moves ray tracing enums to the end
- PackedVectorFormat is a new optional operand type, so it requires
special handling in grammar table generation.
- Add SPV_KHR_integer_dot_product to optimizer whitelists.
- Pass-through validation: valid cases pass validation
Validation errors are not checked.
- Update SPIRV-Headers
Patch by David Neto <dneto@google.com>
Rebase and minor tweaks by Kevin Petit <kevin.petit@arm.com>
Signed-off-by: David Neto <dneto@google.com>
Signed-off-by: Kevin Petit <kevin.petit@arm.com>
Change-Id: Icb41741cb7f0f1063e5541ce25e5ba6c02266d2c
* format fixes
Change-Id: I35c82ec27bded3d1b62373fa6daec3ffd91105a3
This pass converts an internal form of GLSLstd450 Interpolate ops
to the externally valid form. The external form takes the lvalue
of the interpolant. The internal form can do a load of the interpolant.
The pass replaces the load with its pointer. The internal form is
generated by glslang and possibly other frontends for HLSL shaders.
The new pass is called as part of HLSL legalization after all
propagation is complete.
Also adds internal interpolate form to pre-legalization validation
