The .cfi_return_column directive changes the return column for the whole
FDE range. But the actual intent is to tell the unwinder that the value
in x30 (lr) now resides in x15 after the move, and that is expressed by
the .cfi_register directive.
New implementation is based on the existing exp/exp2, with different
reduction constants and polynomial. Worst-case error in round-to-
nearest is 0.513 ULP.
The exp/exp2 shared table is reused for exp10 - .rodata size of
e_exp_data increases by 64 bytes.
As for exp/exp2, targets with single-instruction rounding/conversion
intrinsics can use them by toggling TOINT_INTRINSICS=1 and adding the
necessary code to their math_private.h.
Improvements on Neoverse V1 compared to current GLIBC master:
exp10 thruput: 3.3x in [-0x1.439b746e36b52p+8 0x1.34413509f79ffp+8]
exp10 latency: 1.8x in [-0x1.439b746e36b52p+8 0x1.34413509f79ffp+8]
Tested on:
aarch64-linux-gnu (TOINT_INTRINSICS, fma contraction) and
x86_64-linux-gnu (!TOINT_INTRINSICS, no fma contraction)
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
The previous check did not do anything because tmp_ptr already
points before run_ptr due to the way it is initialized.
Fixes commit e4d8117b82
("stdlib: Avoid another self-comparison in qsort").
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
For i686, this change is no op but for x86_64 it forces all inlined port
rights to be 8 bytes long.
Message-ID: <20231124213041.952886-2-flaviocruz@gmail.com>
It is not strictly required by the POSIX, since O_PATH is a Linux
extension, but it is QoI to fail early instead of at readdir. Also
the check is free, since fdopendir already checks if the file
descriptor is opened for read.
Checked on x86_64-linux-gnu.
The linker just concatenates the .init and .fini sections which
results in the complete _init and _fini functions. If needed the
linker adds padding bytes due to an alignment. GNU ld is adding
NOPs, which is fine. But e.g. mold is adding traps which results
in broken _init and _fini functions.
Thus this patch removes the alignment in .init and .fini sections
in crtn.S files.
We keep the 4 byte function alignment in crti.S files. As the
assembler now also outputs the start of _init and _fini functions
as multiples of 4 byte, it perhaps has to fill it. Although GNU as
is using NOPs here, to be sure, we just keep the alignment with
0x07 (=NOPs) at the end of crti.S.
In order to avoid an obvious NOP slide in _fini, this patch also
uses an lg instead of lgr instruction. Then the emitted instructions
needs a multiple of 4 bytes.
Even for explicit large page support, allocation might use mmap without
the hugepage bit set if the requested size is smaller than
mmap_threshold. For this case where mmap is issued, MAP_HUGETLB is set
iff the allocation size is larger than the used large page.
To force such allocations to use large pages, also tune the mmap_threhold
(if it is not explicit set by a tunable). This forces allocation to
follow the sbrk path, which will fall back to mmap (which will try large
pages before galling back to default mmap).
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
The patch adds two new macros, TUNABLE_GET_DEFAULT and TUNABLE_IS_INITIALIZED,
here the former get the default value with a signature similar to
TUNABLE_GET, while the later returns whether the tunable was set by
the environment variable.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Current code aligns to 2x VEC_SIZE. Aligning to 2x has no affect on
performance other than potentially resulting in an additional
iteration of the loop.
1x maintains aligned stores (the only reason to align in this case)
and doesn't incur any unnecessary loop iterations.
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
_dl_assign_tls_modid() assigns a slotinfo entry for a new module, but
does *not* do anything to the generation counter. The first time this
happens, the generation is zero and map_generation() returns the current
generation to be used during relocation processing. However, if
a slotinfo entry is later reused, it will already have a generation
assigned. If this generation has fallen behind the current global max
generation, then this causes an obsolete generation to be assigned
during relocation processing, as map_generation() returns this
generation if nonzero. _dl_add_to_slotinfo() eventually resets the
generation, but by then it is too late. This causes DTV updates to be
skipped, leading to NULL or broken TLS slot pointers and segfaults.
Fix this by resetting the generation to zero in _dl_assign_tls_modid(),
so it behaves the same as the first time a slot is assigned.
_dl_add_to_slotinfo() will still assign the correct static generation
later during module load, but relocation processing will no longer use
an obsolete generation.
Note that slotinfo entry (aka modid) reuse typically happens after a
dlclose and only TLS access via dynamic tlsdesc is affected. Because
tlsdesc is optimized to use the optional part of static TLS, dynamic
tlsdesc can be avoided by increasing the glibc.rtld.optional_static_tls
tunable to a large enough value, or by LD_PRELOAD-ing the affected
modules.
Fixes bug 29039.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
This patch adds the TCP_MD5SIG_FLAG_IFINDEX constant from Linux 5.6 to
sysdeps/gnu/netinet/tcp.h and updates struct tcp_md5sig accordingly to
contain the device index.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This is just a minor optimization. It also makes it more obvious that
_dl_relocate_object can be called multiple times.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
A recent commit, apparently commit
6c6fce572f "elf: Remove /etc/suid-debug
support", resulted in localplt failures for i686-gnu and x86_64-gnu:
Missing required PLT reference: ld.so: __access_noerrno
After that commit, __access_noerrno is actually no longer used at all.
So rather than just removing the localplt expectation for that symbol
for Hurd, completely remove all definitions of and references to that
symbol.
Tested for x86_64, and with build-many-glibcs.py for i686-gnu and
x86_64-gnu.
This restore the 2.33 semantic for arena_get2. It was changed by
11a02b035b to avoid arena_get2 call malloc (back when __get_nproc
was refactored to use an scratch_buffer - 903bc7dcc2). The
__get_nproc was refactored over then and now it also avoid to call
malloc.
The 11a02b035b did not take in consideration any performance
implication, which should have been discussed properly. The
__get_nprocs_sched is still used as a fallback mechanism if procfs
and sysfs is not acessible.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
These were broken by the new atan2 functions, as they were only
set up for univariate functions. Arity is now detected from the
input file - this revealed a mistake that the double-precision
inputs were being used for both single- and double-precision
routines, which is now remedied.
Many applications still rely on this prototype. Rebuilds without
this prototype result in an implicit function declaration, which can
introduce security vulnerabilities due to 32-bit pointer truncation.
The _dl_non_dynamic_init does not parse LD_PROFILE, which does not
enable profile for dlopen objects. Since dlopen is deprecated for
static objects, it is better to remove the support.
It also allows to trim down libc.a of profile support.
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Loader does not ignore LD_PROFILE in secure-execution mode (different
than man-page states [1]), rather it uses a different path
(/var/profile) and ignore LD_PROFILE_OUTPUT.
Allowing secure-execution profiling is already a non good security
boundary, since it enables different code paths and extra OS access by
the process. But by ignoring LD_PROFILE_OUTPUT, the resulting profile
file might also be acceded in a racy manner since the file name does not
use any process-specific information (such as pid, timing, etc.).
Another side-effect is it forces lazy binding even on libraries that
might be with DF_BIND_NOW.
[1] https://man7.org/linux/man-pages/man8/ld.so.8.html
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Using the memcmp symbol directly allows the compile to inline the
memcmp calls (especially because _dl_tunable_set_hwcaps uses constants
values), generating better code.
Checked with tst-tunables on s390x-linux-gnu (qemu system).
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The dl-symbol-redir-ifunc.h redirects compiler-generated libcalls to
arch-specific memory implementations to avoid ifunc calls where it is not
yet possible. The memcmp-isa-default-impl.h aims to fix the same issue
by calling the specific memset implementation directly.
Using the memcmp symbol directly allows the compiler to inline the memset
calls (especially because _dl_tunable_set_hwcaps uses constants values),
generating better code.
Checked on x86_64-linux-gnu.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The strlen might trigger and invalid GOT entry if it used before
the process is self-relocated (for instance on dl-tunables if any
error occurs).
For i386, _dl_writev with PIE requires to use the old 'int $0x80'
syscall mode because the calling the TLS register (gs) is not yet
initialized.
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Instead of ignoring ill-formatted tunable strings, first, check all the
tunable definitions are correct and then set each tunable value. It
means that partially invalid strings, like "key1=value1:key2=key2=value'
or 'key1=value':key2=value2=value2' do not enable 'key1=value1'. It
avoids possible user-defined errors in tunable definitions.
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Tunable definitions with more than one '=' on are parsed and enabled,
and any subsequent '=' are ignored. It means that tunables in the form
'tunable=tunable=value' or 'tunable=value=value' are handled as
'tunable=value'. These inputs are likely user input errors, which
should not be accepted.
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Some environment variables allow alteration of allocator behavior
across setuid boundaries, where a setuid program may ignore the
tunable, but its non-setuid child can read it and adjust the memory
allocator behavior accordingly.
Most library behavior tunings is limited to the current process and does
not bleed in scope; so it is unclear how pratical this misfeature is.
If behavior change across privilege boundaries is desirable, it would be
better done with a wrapper program around the non-setuid child that sets
these envvars, instead of using the setuid process as the messenger.
The patch as fixes tst-env-setuid, where it fail if any unsecvars is
set. It also adds a dynamic test, although it requires
--enable-hardcoded-path-in-tests so kernel correctly sets the setuid
bit (using the loader command directly would require to set the
setuid bit on the loader itself, which is not a usual deployment).
Co-authored-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
The tunable privilege levels were a retrofit to try and keep the malloc
tunable environment variables' behavior unchanged across security
boundaries. However, CVE-2023-4911 shows how tricky can be
tunable parsing in a security-sensitive environment.
Not only parsing, but the malloc tunable essentially changes some
semantics on setuid/setgid processes. Although it is not a direct
security issue, allowing users to change setuid/setgid semantics is not
a good security practice, and requires extra code and analysis to check
if each tunable is safe to use on all security boundaries.
It also means that security opt-in features, like aarch64 MTE, would
need to be explicit enabled by an administrator with a wrapper script
or with a possible future system-wide tunable setting.
Co-authored-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
setuid/setgid process now ignores any glibc tunables, and filters out
all environment variables that might changes its behavior. This patch
also adds GLIBC_TUNABLES, so any spawned process by setuid/setgid
processes should set tunable explicitly.
Checked on x86_64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Since malloc debug support moved to a different library
(libc_malloc_debug.so), the glibc.malloc.check requires preloading the
debug library to enable it. It means that suid-debug support has not
been working since 2.34.
To restore its support, it would require to add additional information
and parsing to where to find libc_malloc_debug.so.
It is one thing less that might change AT_SECURE binaries' behavior
due to environment configurations.
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The existing logic avoided internal stack overflow. To avoid
a denial-of-service condition with adversarial input, it is necessary
to fall over to heapsort if tail-recursing deeply, too, which does
not result in a deep stack of pending partitions.
The new test stdlib/tst-qsort5 is based on Douglas McIlroy's paper
on this subject.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The previous implementation did not consistently apply the rule that
the child nodes of node K are at 2 * K + 1 and 2 * K + 2, or
that the parent node is at (K - 1) / 2.
Add an internal test that targets the heapsort implementation
directly.
Reported-by: Stepan Golosunov <stepan@golosunov.pp.ru>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
In the insertion phase, we could run off the start of the array if the
comparison function never runs zero. In that case, it never finds the
initial element that terminates the iteration.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Remove the unused 'char *name;' from the example.
Use write instead of putchar to write input as it is read.
Example tested on x86_64 by compiling and running the example.
Tested by building the manual pdf and reviewing the results.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Linux 6.6 (09da082b07bbae1c) added support for fchmodat2, which has
similar semantics as fchmodat with an extra flag argument. This
allows fchmodat to implement AT_SYMLINK_NOFOLLOW and AT_EMPTY_PATH
without the need for procfs.
The syscall is registered on all architectures (with value of 452
except on alpha which is 562, commit 78252deb023cf087).
The tst-lchmod.c requires a small fix where fchmodat checks two
contradictory assertions ('(st.st_mode & 0777) == 2' and
'(st.st_mode & 0777) == 3').
Checked on x86_64-linux-gnu on a 6.6 kernel.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
pool_max_size denotes total allocated rows in pool but possibly not yet
initialized. it's pool_size that represents number of actually occupied
rows hence use it when freeing pool to avoid freeing random addresses.
Signed-off-by: Jan Palus <jpalus@fastmail.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Arguments to a memchr call were swapped, causing incorrect skipping
of files.
Files related to dpkg have different names: they actually end in
.dpkg-new and .dpkg-tmp, not .tmp as I mistakenly assumed.
Fixes commit 2aa0974d25 ("elf: ldconfig should skip
temporary files created by package managers").
