Improve libmvec benchmark integration so that in future other
architectures may be able to run their libmvec benchmarks as well. This
now allows libmvec benchmarks to be run with `make BENCHSET=bench-math`.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The libmvec benchmarks print a message indicating that a certain CPU
feature is unsupported and exit prematurelyi, which breaks the JSON in
bench.out.
Handle this more elegantly in the bench makefile target by adding
support for an UNSUPPORTED exit status (77) so that bench.out continues
to have output for valid tests.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The AT_SYMLINK_NOFOLLOW emulation ues the default 32 bit stat internal
calls, which fails with EOVERFLOW if the file constains timestamps
beyond 2038.
Checked on i686-linux-gnu.
'get_fast_jitter' is meant to be used purely for performance
purposes. In all cases it's used it should be acceptable to get no
randomness (see default case). An example use case is in setting
jitter for retries between threads at a lock. There is a
performance benefit to having jitter, but only if the jitter can
be generated very quickly and ultimately there is no serious issue
if no jitter is generated.
The implementation generally uses 'HP_TIMING_NOW' iff it is
inlined (avoid any potential syscall paths).
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Copied from gnulib/lib/glob.c in order to fix rhbz 1982608
Also fixes swbz 25659
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
PI_STATIC_AND_HIDDEN indicates whether accesses to internal linkage
variables and hidden visibility variables in a shared object (ld.so)
need dynamic relocations (usually R_*_RELATIVE). PI (position
independent) in the macro name is a misnomer: a code sequence using GOT
is typically position-independent as well, but using dynamic relocations
does not meet the requirement.
Not defining PI_STATIC_AND_HIDDEN is legacy and we expect that all new
ports will define PI_STATIC_AND_HIDDEN. Current ports defining
PI_STATIC_AND_HIDDEN are more than the opposite. Change the configure
default.
No functional change.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
These failures were caught while building glibc master for Fedora
Rawhide which is built with '-mtune=generic -msse2 -mfpmath=sse'
using gcc 11.3 (gcc-11.3.1-2.fc35) on a Cascadelake Intel Xeon
processor.
The new code unrolls the main loop slightly without adding too much
overhead and minimizes the comparisons for the search CHAR.
Geometric Mean of all benchmarks New / Old: 0.755
See email for all results.
Full xcheck passes on x86_64 with and without multiarch enabled.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The new code unrolls the main loop slightly without adding too much
overhead and minimizes the comparisons for the search CHAR.
Geometric Mean of all benchmarks New / Old: 0.832
See email for all results.
Full xcheck passes on x86_64 with and without multiarch enabled.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The new code unrolls the main loop slightly without adding too much
overhead and minimizes the comparisons for the search CHAR.
Geometric Mean of all benchmarks New / Old: 0.741
See email for all results.
Full xcheck passes on x86_64 with and without multiarch enabled.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This is necessary to place the libio vtables into the RELRO segment.
New tests elf/tst-relro-ldso and elf/tst-relro-libc are added to
verify that this is what actually happens.
The new tests fail on ia64 due to lack of (default) RELRO support
inbutils, so they are XFAILed there.
m68k is a non-PI_STATIC_AND_HIDDEN arch which uses a GOT relocation when
loading the address of a jump table. The GOT load may be reordered
before processing R_68K_RELATIVE relocations, leading to an
unrelocated/incorrect jump table, which will cause a crash.
The foolproof approach is to add an optimization barrier (e.g. calling
an non-inlinable function after relative relocations are resolved). That
is non-trivial given the current code structure, so just use the simple
approach to avoid the jump table: handle only the essential reloctions
for RTLD_BOOTSTRAP code.
This is based on Andreas Schwab's patch and fixed ld.so crash on m68k.
Reviewed-by: Adheemrval Zanella <adhemerval.zanella@linaro.org>
commit 8804157ad9
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Fri Apr 15 12:27:59 2022 -0500
x86: Optimize memcmp SSE2 in memcmp.S
Only defined wmemcmp and missed __wmemcmp. This commit fixes that by
defining __wmemcmp and setting wmemcmp as a weak alias to __wmemcmp.
Both multiarch and disable-multiarch builds succeed and full xchecks
pass.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
After 73fc4e28b9,
__libc_enable_secure_decided is always 0 and a statically linked
executable may overwrite __libc_enable_secure without considering
AT_SECURE.
The __libc_enable_secure has been correctly initialized in _dl_aux_init,
so just remove __libc_enable_secure_decided and __libc_init_secure.
This allows us to remove some startup_get*id functions from
22b79ed7f4.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Code didn't actually use any sse4 instructions since `ptest` was
removed in:
commit 2f9062d717
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Wed Nov 10 16:18:56 2021 -0600
x86: Shrink memcmp-sse4.S code size
The new memcmp-sse2 implementation is also faster.
geometric_mean(N=20) of page cross cases SSE2 / SSE4: 0.905
Note there are two regressions preferring SSE2 for Size = 1 and Size =
65.
Size = 1:
size, align0, align1, ret, New Time/Old Time
1, 1, 1, 0, 1.2
1, 1, 1, 1, 1.197
1, 1, 1, -1, 1.2
This is intentional. Size == 1 is significantly less hot based on
profiles of GCC11 and Python3 than sizes [4, 8] (which is made
hotter).
Python3 Size = 1 -> 13.64%
Python3 Size = [4, 8] -> 60.92%
GCC11 Size = 1 -> 1.29%
GCC11 Size = [4, 8] -> 33.86%
size, align0, align1, ret, New Time/Old Time
4, 4, 4, 0, 0.622
4, 4, 4, 1, 0.797
4, 4, 4, -1, 0.805
5, 5, 5, 0, 0.623
5, 5, 5, 1, 0.777
5, 5, 5, -1, 0.802
6, 6, 6, 0, 0.625
6, 6, 6, 1, 0.813
6, 6, 6, -1, 0.788
7, 7, 7, 0, 0.625
7, 7, 7, 1, 0.799
7, 7, 7, -1, 0.795
8, 8, 8, 0, 0.625
8, 8, 8, 1, 0.848
8, 8, 8, -1, 0.914
9, 9, 9, 0, 0.625
Size = 65:
size, align0, align1, ret, New Time/Old Time
65, 0, 0, 0, 1.103
65, 0, 0, 1, 1.216
65, 0, 0, -1, 1.227
65, 65, 0, 0, 1.091
65, 0, 65, 1, 1.19
65, 65, 65, -1, 1.215
This is because A) the checks in range [65, 96] are now unrolled 2x
and B) because smaller values <= 16 are now given a hotter path. By
contrast the SSE4 version has a branch for Size = 80. The unrolled
version has get better performance for returns which need both
comparisons.
size, align0, align1, ret, New Time/Old Time
128, 4, 8, 0, 0.858
128, 4, 8, 1, 0.879
128, 4, 8, -1, 0.888
As well, out of microbenchmark environments that are not full
predictable the branch will have a real-cost.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
New code save size (-303 bytes) and has significantly better
performance.
geometric_mean(N=20) of page cross cases New / Original: 0.634
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The loader does not need to pull all __get_errlist definitions
and its size is decreased:
Before:
$ size elf/ld.so
text data bss dec hex filename
197774 11024 456 209254 33166 elf/ld.so
After:
$ size elf/ld.so
text data bss dec hex filename
191510 9936 456 201902 314ae elf/ld.so
Checked on x86_64-linux-gnu.
The goal is to remove most SSSE3 function as SSE4, AVX2, and EVEX are
generally preferable. memcpy/memmove is one exception where avoiding
unaligned loads with `palignr` is important for some targets.
This commit replaces memmove-ssse3 with a better optimized are lower
code footprint verion. As well it aliases memcpy to memmove.
Aside from this function all other SSSE3 functions should be safe to
remove.
The performance is not changed drastically although shows overall
improvements without any major regressions or gains.
bench-memcpy geometric_mean(N=50) New / Original: 0.957
bench-memcpy-random geometric_mean(N=50) New / Original: 0.912
bench-memcpy-large geometric_mean(N=50) New / Original: 0.892
Benchmarks where run on Zhaoxin KX-6840@2000MHz See attached numbers
for all results.
More important this saves 7246 bytes of code size in memmove an
additional 10741 bytes by reusing memmove code for memcpy (total 17987
bytes saves). As well an additional 896 bytes of rodata for the jump
table entries.
With SSE2, SSE4.1, AVX2, and EVEX versions very few targets prefer
SSSE3. As a result it is no longer worth it to keep the SSSE3
versions given the code size cost.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
With SSE2, SSE4.1, AVX2, and EVEX versions very few targets prefer
SSSE3. As a result it is no longer worth it to keep the SSSE3
versions given the code size cost.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
With SSE2, SSE4.1, AVX2, and EVEX versions very few targets prefer
SSSE3. As a result it is no longer worth it to keep the SSSE3
versions given the code size cost.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
With SSE2, SSE4.1, AVX2, and EVEX versions very few targets prefer
SSSE3. As a result it is no longer worth it to keep the SSSE3
versions given the code size cost.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
With SSE2, SSE4.1, AVX2, and EVEX versions very few targets prefer
SSSE3. As a result it is no longer worth it to keep the SSSE3
versions given the code size cost.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Some Linux interfaces never restart after being interrupted by a signal
handler, regardless of the use of SA_RESTART [1]. It means that for
pthread cancellation, if the target thread disables cancellation with
pthread_setcancelstate and calls such interfaces (like poll or select),
it should not see spurious EINTR failures due the internal SIGCANCEL.
However recent changes made pthread_cancel to always sent the internal
signal, regardless of the target thread cancellation status or type.
To fix it, the previous semantic is restored, where the cancel signal
is only sent if the target thread has cancelation enabled in
asynchronous mode.
The cancel state and cancel type is moved back to cancelhandling
and atomic operation are used to synchronize between threads. The
patch essentially revert the following commits:
8c1c0aae20 nptl: Move cancel type out of cancelhandling
2b51742531 nptl: Move cancel state out of cancelhandling
26cfbb7162 nptl: Remove CANCELING_BITMASK
However I changed the atomic operation to follow the internal C11
semantic and removed the MACRO usage, it simplifies a bit the
resulting code (and removes another usage of the old atomic macros).
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
and powerpc64-linux-gnu.
[1] https://man7.org/linux/man-pages/man7/signal.7.html
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
The new IBM z16 is added to platform string array.
The macro _DL_PLATFORMS_COUNT is incremented.
_dl_hwcaps_subdir is extended by "z16" if HWCAP_S390_VXRS_PDE2
is set. HWCAP_S390_NNPA is not tested in _dl_hwcaps_subdirs_active
as those instructions may be replaced or removed in future.
tst-glibc-hwcaps.c is extended in order to test z16 via new marker5.
A fatal glibc error is dumped if glibc was build with architecture
level set for z16, but run on an older machine. (See dl-hwcap-check.h)
On 32-bit machines this has no affect. On 64-bit machines
{u}int_fast{16|32} are set as {u}int64_t which is often not
ideal. Particularly x86_64 this change both saves code size and
may save instruction cost.
Full xcheck passes on x86_64.
The 32-bit and 64-bit variants of RISC-V share the same name - "RISC-V"
- when generating the libm error table for the info pages. This
collision, and the way how the table is generated, mean that the values
in the final table for "RISC-V" may be either for the 32- or 64-bit
variant, with no indication as to which.
As an additional side-effect, this makes the build non-reproducible, as
the error table generated is dependent upon the host filesystem
implementation.
To solve this issue, the libm-test-ulps-name files for both variants
have been modified to include their word size, so as to remove the
collision and provide more accurate information in the table.
An alternative proposed was to merge the two variants' ULP values into a
single file, but this would mean that information about error values is
lost, as the two variants are not identical. Some differences are
considerable, notably the values for the exp() function are large.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
start_addresses in sysdeps/powerpc/powerpc64/start.S is historical
baggage that should disappear. Until someone does that, relocating
stinfo->main by hand is one solution to the fact that the field may be
unrelocated at the time it is accessed. This is similar to what is
done for dynamic tags via the D_PTR macro. stinfo->init and
stinfo->fini are zero in both powerpc64/start.S and powerpc32/start.S,
so make it a little more obvious they are unused by passing NULLs to
LIBC_START_MAIN. The makefile change is needed to pick up
elf/dl-static-tls.h from dl-machine.h.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
libgcc ifunc resolvers that access hwcap via a field in the tcb can't
be called until the thread pointer is set up. Other ifunc resolvers
might need access to at_platform. This patch sets up a fake thread
pointer early to a copy of tcbhead_t. hwcapinfo.c already had local
variables for hwcap and at_platform, replace them with an entire
tcbhead_t. It's not that large and this way we easily ensure hwcap
and at_platform are at the same relative offsets as they are in the
real thread block.
The patch also conditionally disables part of tst-tlsifunc-static,
"bar address read from IFUNC resolver is incorrect". We can't get a
proper address for a thread variable before glibc initialises tls.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
The PowerPC64 linker edits medium model toc-indirect code to toc-pointer
relative:
addis r9,r2,tc_entry_for_var@toc@ha
ld r9,tc_entry_for_var@toc@l(r9)
becomes
addis r9,r2,(var-.TOC.)@ha
addi r9,r9,(var-.TOC.)@l
when "var" is known to be local to the binary. This isn't done for
small-model toc-indirect code, because "var" is almost guaranteed to
be too far away from .TOC. for a 16-bit signed offset. And, because
the analysis of which .toc entry can be removed becomes much more
complicated in objects that mix code models, they aren't removed if
any small-model toc sequence appears in an object file.
Unfortunately, glibc's build of ld.so smashes the needed objects
together in a ld -r linking stage. This means the GOT/TOC is left
with a whole lot of relative relocations which is untidy, but in
itself is not a serious problem. However, static-pie on powerpc64
bombs due to a segfault caused by one of the small-model accesses
before _dl_relocate_static_pie. (The very first one in rcrt1.o
passing start_addresses in r8 to __libc_start_main.)
So this patch makes all the toc/got accesses in assembly medium code
model, and a couple of functions hidden. By itself this is not
enough to give us working static-pie, but it is useful in isolation to
enable better linker optimisation.
There's a serious problem in libgcc too. libgcc ifuncs access the
AT_HWCAP words stored in the tcb with an offset from the thread
pointer (r13), but r13 isn't set at the time _dl_relocate_static_pie.
A followup patch will fix that.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Compilers may decide to put the rfv variable in .data rather than on
the stack. It's slightly better to put it in .data.rel.ro.local
instead. Regardles of that, making it const may enable further
optimisations. Found when examining relative relocations (GOT ones
in particular) as part of enabling static-pie for PowerPC64.
The __closefrom_fallback tries to get a available file descriptor
if the initial open ("/proc/self/fd/", ...) fails. It assumes the
failure would be only if procfs is not mount (ENOENT), however if
the the proc file is not accessible (due some other kernel filtering
such apparmor) it will iterate over a potentially large file set
issuing close calls.
It should only try the close fallback if open returns EMFILE,
ENFILE, or ENOMEM.
Checked on x86_64-linux-gnu.
-z combreloc has been the default regadless of the architecture since
binutils commit f4d733664aabd7bd78c82895e030ec9779a92809 (2002). The
configure check added in commit fdde83499a (2001) has long been
unneeded.
We can therefore treat HAVE_Z_COMBRELOC as always 1 and delete dead code
paths in dl-machine.h files (many were copied from commit a711b01d34
and ee0cb67ec2).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
For sparc64 is the same as the generic implementation, while for
sparc32 the builtin generates the same code.
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
Just a few QOL changes.
1. Prefer `add` > `lea` as it has high execution units it can run
on.
2. Don't break macro-fusion between `test` and `jcc`
3. Reduce code size by removing gratuitous padding bytes (-90
bytes).
geometric_mean(N=20) of all benchmarks New / Original: 0.959
All string/memory tests pass.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Just a few small QOL changes.
1. Prefer `add` > `lea` as it has high execution units it can run
on.
2. Don't break macro-fusion between `test` and `jcc`
geometric_mean(N=20) of all benchmarks New / Original: 0.973
All string/memory tests pass.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The rational is:
1. SSE42 has nearly identical logic so any benefit is minimal (3.4%
regression on Tigerlake using SSE42 versus AVX across the
benchtest suite).
2. AVX2 version covers the majority of targets that previously
prefered it.
3. The targets where AVX would still be best (SnB and IVB) are
becoming outdated.
All in all the saving the code size is worth it.
All string/memory tests pass.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Slightly faster method of doing TOLOWER that saves an
instruction.
Also replace the hard coded 5-byte no with .p2align 4. On builds with
CET enabled this misaligned entry to strcasecmp.
geometric_mean(N=40) of all benchmarks New / Original: .920
All string/memory tests pass.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Slightly faster method of doing TOLOWER that saves an
instruction.
Also replace the hard coded 5-byte no with .p2align 4. On builds with
CET enabled this misaligned entry to strcasecmp.
geometric_mean(N=40) of all benchmarks New / Original: .894
All string/memory tests pass.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Overflow case for __wcsncmp_avx2_rtm should be __wcscmp_avx2_rtm not
__wcscmp_avx2.
commit ddf0992cf5
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Sun Jan 9 16:02:21 2022 -0600
x86: Fix __wcsncmp_avx2 in strcmp-avx2.S [BZ# 28755]
Set the wrong fallback function for `__wcsncmp_avx2_rtm`. It was set
to fallback on to `__wcscmp_avx2` instead of `__wcscmp_avx2_rtm` which
can cause spurious aborts.
This change will need to be backported.
All string/memory tests pass.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The generic implementation is faster.
geometric_mean(N=20) of all benchmarks New / Original: .710
All string/memory tests pass.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The generic implementation is faster.
geometric_mean(N=20) of all benchmarks New / Original: .678
All string/memory tests pass.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Use _mm_cmpeq_epi8 and _mm_movemask_epi8 to get strlen instead of
_mm_cmpistri. Also change offset to unsigned to avoid unnecessary
sign extensions.
geometric_mean(N=20) of all benchmarks that dont fallback on
sse2; New / Original: .901
All string/memory tests pass.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Use _mm_cmpeq_epi8 and _mm_movemask_epi8 to get strlen instead of
_mm_cmpistri. Also change offset to unsigned to avoid unnecessary
sign extensions.
geometric_mean(N=20) of all benchmarks that dont fallback on
sse2/strlen; New / Original: .928
All string/memory tests pass.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Small code cleanup for size: -81 bytes.
Add comment justifying using a branch to do NULL/non-null return.
All string/memory tests pass and no regressions in benchtests.
geometric_mean(N=20) of all benchmarks New / Original: .985
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Small code cleanup for size: -53 bytes.
Add comment justifying using a branch to do NULL/non-null return.
All string/memory tests pass and no regressions in benchtests.
geometric_mean(N=20) of all benchmarks Original / New: 1.00
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This patch updates the kernel version in the test tst-mman-consts.py
to 5.17. (There are no new MAP_* constants covered by this test in
5.17 that need any other header changes.)
Tested with build-many-glibcs.py.
Linux 5.17 has one new syscall, set_mempolicy_home_node. Update
syscall-names.list and regenerate the arch-syscall.h headers with
build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
It is not used on rtld and ldsodef interfaces are meant to be used
solely on loader. It also removes the only usage of gcc extension
__builtin_va_arg_pack.
configure scripts need to be runnable with a POSIX-compliant /bin/sh.
On many (but not all!) systems, /bin/sh is provided by Bash, so errors
like this aren't spotted. Notably Debian defaults to /bin/sh provided
by dash which doesn't tolerate such bashisms as '=='.
This retains compatibility with bash.
Fixes configure warnings/errors like:
```
checking if compiler warns about alias for function with incompatible types... yes
/var/tmp/portage/sys-libs/glibc-2.34-r10/work/glibc-2.34/configure: 4209: test: xyes: unexpected operator
```
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Sam James <sam@gentoo.org>
The close_retry goto jump is confusing and clumsy to read, so refactor
the code a bit to make it easier to follow.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Clean up another antipattern where code flows from an if condition to
its else counterpart with a goto.
Most of the change in this patch is whitespace-only; a `git diff -b`
ought to show the actual logic changes.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Split out line processing for `label`, `precedence` and `scopev4` into
separate functions instead of the gotos.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
All other cases of failures due to lack of memory return EAI_MEMORY, so
it seems wrong to return EAI_SYSTEM here. The only reason
convert_hostent_to_gaih_addrtuple could fail is on calloc failure.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Simplify the loop a wee bit and clean up variable names too.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Flatten the condition nesting and replace the alloca for RET.AT/ATR with
a single array LOCAL_AT[2]. This gets rid of alloca and alloca
accounting.
`git diff -b` is probably the best way to view this change since much of
the diff is whitespace changes.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
The macro is quite a pain to debug, so make gethosts into a function to
make it easier to maintain.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Add a new member got_ipv6 to indicate if the results have an IPv6
result and use it instead of the local got_ipv6.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Add a free_at flag in gaih_result to indicate if res.at needs to be
freed by the caller.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Introduce the gaih_result structure and general paradigm for cleanups
that follow to process the lookup request and return a result. A lookup
function (like text_to_binary_address), should return an integer error
code and set members of gaih_result based on what it finds. If the
function does not have a result and no errors have occurred during the
lookup, it should return 0 and res.at should be set to NULL, allowing a
subsequent function to do the lookup until we run out of options.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Refactor the code to split out the service resolution code into a
separate function. Allocate the service tuples array just once to the
size of the typeproto array, thus avoiding the unnecessary pointer
chasing and stack allocations.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Use realloc in convert_hostent_to_gaih_addrtuple and fix up pointers in
the result list so that a single block is maintained for
hostbyname3_r/hostbyname2_r and freed in gaih_inet. This result is
never merged with any other results, since the hosts database does not
permit merging.
Resolves BZ #28852.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Simplify logic for allocation of canon to remove the canonbuf variable;
canon now always points to an allocated block. Also pull the canon name
set into a separate function.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Allocations for address tuples is currently a bit confusing because of
the pointer chasing through PAT, making it hard to observe the sequence
in which allocations have been made. Narrow scope of the pointer
chasing through PAT so that it is only used where necessary.
This also tightens actions behaviour with the hosts database in
getaddrinfo to comply with the manual text. The "continue" action
discards previous results and the "merge" action results in an immedate
lookup failure. Consequently, chaining of allocations across modules is
no longer necessary, thus opening up cleanup opportunities.
A test has been added that checks some combinations to ensure that they
work correctly.
Resolves: BZ #28931
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
When swapcontext.c is compiled without -g, the following error occurs:
Error: CFI instruction used without previous .cfi_startproc
Fix by converting swapcontext routine to assembler.
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Remove libc-do-syscall from sysdep-dl-routines added by:
commit 3b33d6ed60
Author: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Date: Sun Jan 8 11:38:23 2017 -0200
Rework -fno-omit-frame-pointer support on i386
and use auto-generated io/rtld-libc-do-syscall.os instead. This fixes
BZ #28936.
And optimize it slightly.
This is commit 8c8510ab27 revised.
In _dl_aux_init in elf/dl-support.c, use an explicit loop
and -fno-tree-loop-distribute-patterns to avoid memset.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
1. Also generate .d dependency files for $(tests-container) and
$(tests-printers).
2. elf: Add tst-auditmod17.os to extra-test-objs.
3. iconv: Add tst-gconv-init-failure-mod.os to extra-test-objs.
4. malloc: Rename extra-tests-objs to extra-test-objs.
5. linux: Add tst-sysconf-iov_max-uapi.o to extra-test-objs.
6. x86_64: Add tst-x86_64mod-1.o, tst-platformmod-2.o, test-libmvec.o,
test-libmvec-avx.o, test-libmvec-avx2.o and test-libmvec-avx512f.o to
extra-test-objs.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The symbol is not present current POSIX specification and compiler
already generates memset call. The arch specific implementation
is just to avoid the __bzero symbol creation (which ia64 abi does
not export).
This change fixes two warnings from _dl_lookup_address.
The first warning comes from dropping the volatile keyword from
desc in the call to _dl_read_access_allowed. We now have a full
atomic barrier between loading desc[0] and the access check, so
desc no longer needs to be declared as volatile.
The second warning comes from the implicit declaration of
_dl_fix_reloc_arg. This is fixed by including dl-runtime.h and
declaring _dl_fix_reloc_arg in dl-runtime.h.
The current getcontext return trampoline is overly complex and it
unnecessarily clobbers several registers. By saving the context
pointer (r26) in the context, __getcontext_ret can restore any
registers not restored by setcontext. This allows getcontext to
save and restore the entire register context present when getcontext
is entered. We use the unused oR0 context slot for the return
from __getcontext_ret.
While this is not directly useful in C, it can be exploited in
assembly code. Registers r20, r23, r24 and r25 are not clobbered
in the call path to getcontext. This allows a small simplification
of swapcontext.
It also allows saving and restoring the 6-bit SAR register in the
LSB of the oSAR context slot. The getcontext flag value can be
stored in the MSB of the oSAR slot.
Previously TEST_NAME was passing a function pointer. This didn't fail
because of the -Wno-error flag (to allow for overflow sizes passed
to strncmp/wcsncmp)
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
In the overflow fallback strncmp-avx2-rtm and wcsncmp-avx2-rtm would
call strcmp-avx2 and wcscmp-avx2 respectively. This would have
not checks around vzeroupper and would trigger spurious
aborts. This commit fixes that.
test-strcmp, test-strncmp, test-wcscmp, and test-wcsncmp all pass on
AVX2 machines with and without RTM.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This change fixes the failure of stdlib/tst-setcontext2 and
stdlib/tst-setcontext7 on hppa. The implementation of swapcontext
in C is broken. C saves the return pointer (rp) and any non
call-clobbered registers (in this case r3, r4 and r5) on the
stack. However, the setcontext call in swapcontext pops the
stack and subsequent calls clobber the saved registers. When
the context in oucp is restored, both tests fault.
Here we rewrite swapcontext in assembly code to avoid using
the stack for register values that need to be used after
restoration. The getcontext and setcontext routines are
revised to save and restore register ret1 for normal returns.
We copy the oucp pointer to ret1. This allows access to
the old context after calling getcontext and setcontext.
In the overflow fallback strncmp-avx2-rtm and wcsncmp-avx2-rtm would
call strcmp-avx2 and wcscmp-avx2 respectively. This would have
not checks around vzeroupper and would trigger spurious
aborts. This commit fixes that.
test-strcmp, test-strncmp, test-wcscmp, and test-wcsncmp all pass on
AVX2 machines with and without RTM.
Co-authored-by: H.J. Lu <hjl.tools@gmail.com>
On Microblaze only __NR_newselect is implemented, even though kernel
advertise __NR_select on asm/unistd.h. Since microblaze is the
only architecture that undef __ASSUME_PSELECT, the generic code
change is simpler than chaging the architecture syscall number.
Acked-by: Mark Hatle <mark.hatle@xilinx.com>
This patch updates the kernel version in the test tst-mman-consts.py
to 5.16. (There are no new MAP_* constants covered by this test in
5.16 that need any other header changes.)
Tested with build-many-glibcs.py.
The __sem_check_add_mapping internal stat calls fails with
EOVERFLOW if system time is larger than 32 bit.
It is a missing spot from 52a5fe70a2 fix to use 64 bit stat
internally.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Logic can read before the start of `s1` / `s2` if both `s1` and `s2`
are near the start of a page. To avoid having the result contimated by
these comparisons the `strcmp` variants would mask off these
comparisons. This was missing in the `strncmp` variants causing
the bug. This commit adds the masking to `strncmp` so that out of
range comparisons don't affect the result.
test-strcmp, test-strncmp, test-wcscmp, and test-wcsncmp all pass as
well a full xcheck on x86_64 linux.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
