* localedata/locales/an_ES (LC_MESSAGES): Add yesstr and nostr.
* localedata/locales/an_ES (LC_ADDRESS): Add lang_term and lang_lib.
* localedata/locales/an_ES: Make source more readable by using ASCII
where possible.
This patch adds a single-threaded fast path to malloc, realloc,
calloc and memalloc. When we're single-threaded, we can bypass
arena_get (which always locks the arena it returns) and just use
the main arena. Also avoid retrying a different arena since
there is just the main arena.
* malloc/malloc.c (__libc_malloc): Add SINGLE_THREAD_P path.
(__libc_realloc): Likewise.
(_mid_memalign): Likewise.
(__libc_calloc): Likewise.
* localedata/locales/tpi_PG (LC_MESSAGES): Fix yesexpr and noexpr
by adding the generic +1 and -0 as in all other locales.
* localedata/locales/tpi_PG (LC_TIME): Fix some typos in the month and
day names and make it more readable by using ASCII where possible.
The glibc implementation of iseqsig relies on ordered comparison
operators raising the "invalid" exception for quiet NaN operands, with
a workaround on platforms where a GCC bug means that exception is not
raised. For x86, that bug has now been fixed for GCC 8, so this patch
disables the workaround in that case. If and when the corresponding
bugs for powerpc and s390 are fixed, the headers for those platforms
should of course be updated similarly.
Tested for x86_64 and x86, including with GCC mainline. Note that
other failures appear with GCC mainline because of spurious use of
ordered comparison instructions for unordered operations
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82692>.
* sysdeps/x86/fpu/fix-fp-int-compare-invalid.h
(FIX_COMPARE_INVALID): Define to 0 if [__GNUC_PREREQ (8, 0)].
As shown in some buildbot issues on aarch64 and powerpc, calling
clone (VFORK) and waitpid (WNOHANG) does not guarantee the child
is ready to be collected. This patch changes the call back to 0
as before fe05e1cb6d fix.
This change can lead to the scenario 4.3 described in the commit,
where the waitpid call can hang undefinitely on the call. However
this is also a very unlikely and also undefinied situation where
both the caller is trying to terminate a pid before posix_spawn
returns and the race pid reuse is triggered. I don't see how to
correct handle this specific situation within posix_spawn.
Checked on x86_64-linux-gnu, aarch64-linux-gnu and
powerpc64-linux-gnu.
* sysdeps/unix/sysv/linux/spawni.c (__spawnix): Use 0 instead of
WNOHANG in waitpid call.
The _SC_LEVEL1_DCACHE_LINESIZE is reported using the contents of the
ctr_el0 register, which tells us the minimum observable cache line
size by userspace. This typically is the same as the L1 cache line
size, but that may not always be true. It could be a higher level
cache line size as long as cache cleaning and invalidation work
correctly with that line size in userspace. The falkor core for
example reports the L2 line size as the dcache line size in CTR_EL0
while also reporting the correct L1 dcache line size via CCSIDR_EL1.
* manual/conf.texi (_SC_LEVEL1_DCACHE_LINESIZE,
_SC_LEVEL1_ICACHE_LINESIZE): Document aarch64 caveat.
Reviewed-by: Rical Jasan <ricaljasan@pacific.net>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Write short descriptions for each of the cache information sysconf
variables.
* manual/conf.texi (_SC_LEVEL1_ICACHE_SIZE,
_SC_LEVEL1_ICACHE_ASSOC, _SC_LEVEL1_ICACHE_LINESIZE,
_SC_LEVEL1_DCACHE_SIZE, _SC_LEVEL1_DCACHE_ASSOC,
_SC_LEVEL1_DCACHE_LINESIZE, _SC_LEVEL2_CACHE_SIZE,
_SC_LEVEL2_CACHE_ASSOC, _SC_LEVEL2_CACHE_LINESIZE,
_SC_LEVEL3_CACHE_SIZE, _SC_LEVEL3_CACHE_ASSOC,
_SC_LEVEL3_CACHE_LINESIZE, _SC_LEVEL4_CACHE_SIZE,
_SC_LEVEL4_CACHE_ASSOC, _SC_LEVEL4_CACHE_LINESIZE): New
variables.
Reviewed-by: Rical Jasan <ricaljasan@pacific.net>
cfi info for stack adjust needs to be on the insn doing the adjust.
cfi describing register saves can be anywhere after the save insn but
before the reg is altered. Fewer locations with cfi result in smaller
cfi programs and possibly slightly faster exception handling. Thus
the LR cfi_offset move.
The idea behind ajusting sp after restoring regs is to break a
register dependency chain, in this case not be using r1 immediately
after it is modified.
The missing LR cfi_restore meant that code after the blr,
unaligned_lt_16 and other labels, would have cfi that said LR was at
cfa+16, but that code is reached without LR being saved.
* sysdeps/powerpc/powerpc64/power8/strncpy.S: Move LR cfi.
Adjust stack after restoring regs. Add missing LR cfi_restore.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
This patch moves the frame setup and teardown to immediately around
the single memset call, as has been done for power8. I've also
decreased FRAMESIZE to that needed to save the two callee-saved
registers used. Plus added cfi.
* sysdeps/powerpc/powerpc64/power7/strncpy.S: Decrease FRAMESIZE.
Move LR save and frame setup/teardown and LR restore to
immediately around memset call. Provide cfi.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
This patch replaces i386 assembly versions of e_exp2f with generic
e_exp2f.c. For workload-spec2017.wrf, on Nehalem, it improves
performance by:
Before After Improvement
reciprocal-throughput 112.996 40.0454 182%
latency 126.581 54.4479 132%
On Skylake, it improves performance by:
Before After Improvement
reciprocal-throughput 113.14 39.447 186%
latency 136.068 55.684 144%
On IvyBridge with --disable-multi-arch, it improves performance by:
Before After Improvement
reciprocal-throughput 132.521 40.3759 228%
latency 145.791 58.4587 149%
* sysdeps/i386/fpu/e_exp2f.S: Removed.
* sysdeps/i386/fpu/w_exp2f.c: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Updated for generic e_exp2f.c.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/Makefile (libm-sysdep_routines):
Add e_exp2f-sse2.
(CFLAGS-e_exp2f-sse2.c): New.
* sysdeps/i386/i686/fpu/multiarch/e_exp2f-sse2.c: New file.
* sysdeps/i386/i686/fpu/multiarch/e_exp2f.c: Likewise.
The bits/floatn.h header currently only has defines relating to
_Float128. This patch adds defines relating to other _FloatN /
_FloatNx types.
The approach taken is to add defines for all _FloatN / _FloatNx types
known to GCC, and to put them in a common bits/floatn-common.h header
included at the end of all the individual bits/floatn.h headers. If
in future some defines become different for different glibc
configurations, they will move out into the separate bits/floatn.h
headers.
Some defines are expected always to be the same across glibc ports.
Corresponding defines are nevertheless put in this header. The intent
is that where there are conditionals (in headers or in non-installed
files) that can just repeat the same or nearly the same logic for each
floating-point type, they should do so, even if in fact the cases for
some types could be unconditionally present or absent because the same
conditionals are true or false for all glibc configurations. This
should make the glibc code with such conditionals easier to read,
because the reader can just see that the same conditionals are
repeated for each type, rather than seeing different conditionals for
different types and needing to reason, at each location with such
differences, why those differences are indeed correct there. (Cases
involving per-format rather than per-type logic are more likely still
to need differences in how they handle different types.)
Having such defines and conditionals also helps in incremental
preparation for adding _Float32 / _Float64 / _Float32x / _Float64x
function aliases. I intend subsequent patches to add such
conditionals corresponding to those already present for _Float128, as
well as making more architecture-specific function implementations use
common macros to define aliases in preparation for adding such _FloatN
/ _FloatNx aliases.
Tested for x86_64.
* bits/floatn-common.h: New file.
* math/Makefile (headers): Add bits/floatn-common.h.
* bits/floatn.h: Include <bits/floatn-common.h>.
* sysdeps/ia64/bits/floatn.h: Likewise.
* sysdeps/ieee754/ldbl-128/bits/floatn.h: Likewise.
* sysdeps/mips/ieee754/bits/floatn.h: Likewise.
* sysdeps/powerpc/bits/floatn.h: Likewise.
* sysdeps/x86/bits/floatn.h: Likewise.
GCC 8 emits an warning for alias for functions with incompatible types
and it is used extensivelly for ifunc resolvers implementations in C
(for instance on weak_alias with the internal symbol name to the
external one or with the libc_hidden_def to set ifunc for internal
usage).
This breaks the build when the ifunc resolver is not defined using
gcc attribute extensions (HAVE_GCC_IFUNC being 0). Although for
all currently architectures that have multiarch support this compiler
options is enabled for default, there is still the option where the
user might try build glibc with a compiler without support for such
extension. In this case this patch just disable the multiarch folder
in sysdeps selections.
GCC 7 and before still builds IFUNCs regardless of compiler support
(although for the lack of attribute support debug information would
be optimal).
Checked with a build on multiarch support architectures (aarch64,
arm, sparc, s390, powerpc, x86_64, i386) with multiarch enable
and disable and with GCC 7 and GCC 8.
* configure.ac (libc_cv_gcc_incompatbile_alias): New define:
indicates whether compiler emits an warning for alias for
functions with incompatible types.
As noted by Florian Weimer, current Linux posix_spawn implementation
can trigger an assert if the auxiliary process is terminated before
actually setting the err member:
340 /* Child must set args.err to something non-negative - we rely on
341 the parent and child sharing VM. */
342 args.err = -1;
[...]
362 new_pid = CLONE (__spawni_child, STACK (stack, stack_size), stack_size,
363 CLONE_VM | CLONE_VFORK | SIGCHLD, &args);
364
365 if (new_pid > 0)
366 {
367 ec = args.err;
368 assert (ec >= 0);
Another possible issue is killing the child between setting the err and
actually calling execve. In this case the process will not ran, but
posix_spawn also will not report any error:
269
270 args->err = 0;
271 args->exec (args->file, args->argv, args->envp);
As suggested by Andreas Schwab, this patch removes the faulty assert
and also handles any signal that happens before fork and execve as the
spawn was successful (and thus relaying the handling to the caller to
figure this out). Different than Florian, I can not see why using
atomics to set err would help here, essentially the code runs
sequentially (due CLONE_VFORK) and I think it would not be legal the
compiler evaluate ec without checking for new_pid result (thus there
is no need to compiler barrier).
Summarizing the possible scenarios on posix_spawn execution, we
have:
1. For default case with a success execution, args.err will be 0, pid
will not be collected and it will be reported to caller.
2. For default failure case, args.err will be positive and the it will
be collected by the waitpid. An error will be reported to the
caller.
3. For the unlikely case where the process was terminated and not
collected by a caller signal handler, it will be reported as succeful
execution and not be collected by posix_spawn (since args.err will
be 0). The caller will need to actually handle this case.
4. For the unlikely case where the process was terminated and collected
by caller we have 3 other possible scenarios:
4.1. The auxiliary process was terminated with args.err equal to 0:
it will handled as 1. (so it does not matter if we hit the pid
reuse race since we won't possible collect an unexpected
process).
4.2. The auxiliary process was terminated after execve (due a failure
in calling it) and before setting args.err to -1: it will also
be handle as 1. but with the issue of not be able to report the
caller a possible execve failures.
4.3. The auxiliary process was terminated after args.err is set to -1:
this is the case where it will be possible to hit the pid reuse
case where we will need to collected the auxiliary pid but we
can not be sure if it will be expected one. I think for this
case we need to actually change waitpid to use WNOHANG to avoid
hanging indefinitely on the call and report an error to caller
since we can't differentiate between a default failure as 2.
and a possible pid reuse race issue.
Checked on x86_64-linux-gnu.
* sysdeps/unix/sysv/linux/spawni.c (__spawnix): Handle the case where
the auxiliary process is terminated by a signal before calling _exit
or execve.
In _dl_runtime_resolve, use fxsave/xsave/xsavec to preserve all vector,
mask and bound registers. It simplifies _dl_runtime_resolve and supports
different calling conventions. ld.so code size is reduced by more than
1 KB. However, use fxsave/xsave/xsavec takes a little bit more cycles
than saving and restoring vector and bound registers individually.
Latency for _dl_runtime_resolve to lookup the function, foo, from one
shared library plus libc.so:
Before After Change
Westmere (SSE)/fxsave 345 866 151%
IvyBridge (AVX)/xsave 420 643 53%
Haswell (AVX)/xsave 713 1252 75%
Skylake (AVX+MPX)/xsavec 559 719 28%
Skylake (AVX512+MPX)/xsavec 145 272 87%
Ryzen (AVX)/xsavec 280 553 97%
This is the worst case where portion of time spent for saving and
restoring registers is bigger than majority of cases. With smaller
_dl_runtime_resolve code size, overall performance impact is negligible.
On IvyBridge, differences in build and test time of binutils with lazy
binding GCC and binutils are noises. On Westmere, differences in
bootstrap and "makc check" time of GCC 7 with lazy binding GCC and
binutils are also noises.
[BZ #21265]
* sysdeps/x86/cpu-features-offsets.sym (XSAVE_STATE_SIZE_OFFSET):
New.
* sysdeps/x86/cpu-features.c: Include <libc-pointer-arith.h>.
(get_common_indeces): Set xsave_state_size, xsave_state_full_size
and bit_arch_XSAVEC_Usable if needed.
(init_cpu_features): Remove bit_arch_Use_dl_runtime_resolve_slow
and bit_arch_Use_dl_runtime_resolve_opt.
* sysdeps/x86/cpu-features.h (bit_arch_Use_dl_runtime_resolve_opt):
Removed.
(bit_arch_Use_dl_runtime_resolve_slow): Likewise.
(bit_arch_Prefer_No_AVX512): Updated.
(bit_arch_MathVec_Prefer_No_AVX512): Likewise.
(bit_arch_XSAVEC_Usable): New.
(STATE_SAVE_OFFSET): Likewise.
(STATE_SAVE_MASK): Likewise.
[__ASSEMBLER__]: Include <cpu-features-offsets.h>.
(cpu_features): Add xsave_state_size and xsave_state_full_size.
(index_arch_Use_dl_runtime_resolve_opt): Removed.
(index_arch_Use_dl_runtime_resolve_slow): Likewise.
(index_arch_XSAVEC_Usable): New.
* sysdeps/x86/cpu-tunables.c (TUNABLE_CALLBACK (set_hwcaps)):
Support XSAVEC_Usable. Remove Use_dl_runtime_resolve_slow.
* sysdeps/x86_64/Makefile (tst-x86_64-1-ENV): New if tunables
is enabled.
* sysdeps/x86_64/dl-machine.h (elf_machine_runtime_setup):
Replace _dl_runtime_resolve_sse, _dl_runtime_resolve_avx,
_dl_runtime_resolve_avx_slow, _dl_runtime_resolve_avx_opt,
_dl_runtime_resolve_avx512 and _dl_runtime_resolve_avx512_opt
with _dl_runtime_resolve_fxsave, _dl_runtime_resolve_xsave and
_dl_runtime_resolve_xsavec.
* sysdeps/x86_64/dl-trampoline.S (DL_RUNTIME_UNALIGNED_VEC_SIZE):
Removed.
(DL_RUNTIME_RESOLVE_REALIGN_STACK): Check STATE_SAVE_ALIGNMENT
instead of VEC_SIZE.
(REGISTER_SAVE_BND0): Removed.
(REGISTER_SAVE_BND1): Likewise.
(REGISTER_SAVE_BND3): Likewise.
(REGISTER_SAVE_RAX): Always defined to 0.
(VMOV): Removed.
(_dl_runtime_resolve_avx): Likewise.
(_dl_runtime_resolve_avx_slow): Likewise.
(_dl_runtime_resolve_avx_opt): Likewise.
(_dl_runtime_resolve_avx512): Likewise.
(_dl_runtime_resolve_avx512_opt): Likewise.
(_dl_runtime_resolve_sse): Likewise.
(_dl_runtime_resolve_sse_vex): Likewise.
(USE_FXSAVE): New.
(_dl_runtime_resolve_fxsave): Likewise.
(USE_XSAVE): Likewise.
(_dl_runtime_resolve_xsave): Likewise.
(USE_XSAVEC): Likewise.
(_dl_runtime_resolve_xsavec): Likewise.
* sysdeps/x86_64/dl-trampoline.h (_dl_runtime_resolve_avx512):
Removed.
(_dl_runtime_resolve_avx512_opt): Likewise.
(_dl_runtime_resolve_avx): Likewise.
(_dl_runtime_resolve_avx_opt): Likewise.
(_dl_runtime_resolve_sse): Likewise.
(_dl_runtime_resolve_sse_vex): Likewise.
(_dl_runtime_resolve_fxsave): New.
(_dl_runtime_resolve_xsave): Likewise.
(_dl_runtime_resolve_xsavec): Likewise.
This patch adds single-threaded fast paths to _int_free.
Bypass the explicit locking for larger allocations.
* malloc/malloc.c (_int_free): Add SINGLE_THREAD_P fast paths.
Remove the bogus targets (and source) that supposedly build ga_test.
This code was added to resolv very early in the development process
but does not appear to be an actual test program. The target for
building this file is tests but because the glibc Make system is
built the way it is, the target is overriden by higher-level tests
targets and, therefore, the ga_test program is never built. Removing
the target and the source code makes the resolv/Makefile less confusing.
Tested by building and running 'make check' on 64 bit host running
Kernel 4.10.0-19 configured with
--prefix=/home/hawkinsw/code/glibc-build/install
--enable-hardcoded-path-in-tests
--disable-mathvec
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
When --enable-static-pie is used to configure glibc, we need to use
_dl_relocate_static_pie to compute load address in static PIE.
* sysdeps/m68k/dl-machine.h (elf_machine_load_address): Use
_dl_relocate_static_pie instead of _dl_start to compute load
address in static PIE.
After commit 37f802f864 (Remove
__need_IOV_MAX and __need_FOPEN_MAX), UIO_MAXIOV is no longer supplied
(indirectly) through <bits/stdio_lim.h>, so sysdeps/posix/sysconf.c no
longer sees the definition.
This patch adds a MIPS-specific bits/floatn.h header. This header is
identical to the ldbl-128 version except for the comment at the top;
the purpose is to ensure that a 32-bit MIPS build installs a header
that is the same as in a 64-bit MIPS build and so properly shows
_Float128 support to be available for 64-bit compilations, on the
general principle of an installation for one multilib providing
headers also suitable for other multilibs.
Tested with build-many-glibcs.py.
* sysdeps/mips/ieee754/bits/floatn.h: New file.
Similar to bug 21987 for SPARC, MIPS64 wrongly installs the ldbl-128
version of bits/long-double.h, meaning incorrect results when using
headers installed from a 64-bit installation for a 32-bit build. (I
haven't actually seen this cause build failures before its interaction
with bits/floatn.h did so - installed headers wrongly expecting
_Float128 to be available in a 32-bit configuration.)
This patch fixes the bug by moving the MIPS header to
sysdeps/mips/ieee754, which comes before sysdeps/ieee754/ldbl-128 in
the sysdeps directory ordering. (bits/floatn.h will need a similar
fix - duplicating the ldbl-128 version for MIPS will suffice - for
headers from a 32-bit installation to be correct for 64-bit builds.)
Tested with build-many-glibcs.py (compilers build for
mips64-linux-gnu, where there was previously a libstdc++ build failure
as at
<https://sourceware.org/ml/libc-testresults/2017-q4/msg00130.html>).
[BZ #22322]
* sysdeps/mips/bits/long-double.h: Move to ....
* sysdeps/mips/ieee754/bits/long-double.h: ... here.
This patch fixes a deadlock in the fastbin consistency check.
If we fail the fast check due to concurrent modifications to
the next chunk or system_mem, we should not lock if we already
have the arena lock. Simplify the check to make it obviously
correct.
* malloc/malloc.c (_int_free): Fix deadlock bug in consistency check.
This patch adds support for *f128 function aliases on platforms where
long double has the binary128 format (and thus GCC 7 provides the
_Float128 type with the same ABI as long double but as a distinct type
in terms of C type compatibility). This is the same API as provided
in glibc 2.26 for powerpc64le / x86_64 / x86 / ia64 where _Float128
has a different format from long double, with the bulk of the API
coming from TS 18661-3. All the functions alias the corresponding
long double functions, and __* function names are not provided since
those are only needed once for each floating-point format, not more
than once for different types with the same format (so for example,
-ffinite-math-only maps foof128 to __fool_finite, while type-generic
macros end up calling e.g. __issignalingl for _Float128 arguments on
such platforms).
The preparation for this feature was done in previous patches, so this
one just needs to add the relevant makefile and header definitions,
and update macro definitions of libm_alias_ldouble_other_r, to turn on
the feature, and update documentation and ABI baselines.
Tested (a) for x86_64, (b) for aarch64, (c) with build-many-glibcs.py
with both GCC 6 and GCC 7.
* sysdeps/ieee754/ldbl-128/Makeconfig: New file.
* sysdeps/ieee754/ldbl-128/bits/floatn.h: Likewise.
* sysdeps/ieee754/ldbl-128/float128-abi.h: Likewise.
* sysdeps/generic/libm-alias-ldouble.h: Include <bits/floatn.h>.
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128]
(libm_alias_ldouble_other_r): Also create _Float128 alias.
* sysdeps/ieee754/ldbl-opt/libm-alias-ldouble.h: Include
<bits/floatn.h>.
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128]
(libm_alias_ldouble_other_r): Also create _Float128 alias.
* manual/math.texi (Mathematics): Document additional architecture
support for _Float128.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
This patch rewrites aarch64 elf_machine_load_address to use special _DYNAMIC
symbol instead of _dl_start.
The static address of _DYNAMIC symbol is stored in the first GOT entry.
Here is the change which makes this solution work (part of binutils 2.24):
https://sourceware.org/ml/binutils/2013-06/msg00248.html
i386, x86_64 targets use the same method to do this as well.
The original implementation relies on a trick that R_AARCH64_ABS32 relocation
being resolved at link time and the static address fits in the 32bits.
However, in LP64, normally, the address is defined to be 64 bit.
Here is the C version one which should be portable in all cases.
* sysdeps/aarch64/dl-machine.h (elf_machine_load_address): Use
_DYNAMIC symbol to calculate load address.
A performance regression was introduced by commit
84d74e427a "powerpc: Cleanup fenv_private.h".
In the powerpc implementation of SET_RESTORE_ROUND, there is the
following code in the "SET" function (slightly simplified):
--
old.fenv = fegetenv_register ();
new.l = (old.l & _FPU_MASK_TRAPS_RN) | r; (1)
if (new.l != old.l) (2)
{
if ((old.l & _FPU_ALL_TRAPS) != 0)
(void) __fe_mask_env ();
fesetenv_register (new.fenv); (3)
--
Line (1) sets the value of "new" to the current value of FPSCR,
but masks off summary bits, exceptions, non-IEEE mode, and
rounding mode, then ORs in the new rounding mode.
Line (2) compares this new value to the current value in order to
avoid setting a new value in the FPSCR (line (3)) unless something
significant has changed (exception enables or rounding mode).
The summary bits are not germane to the comparison, but are cleared
in "new" and preserved in "old", resulting in false negative
comparisons, and unnecessarily setting the FPSCR in those cases
with associated negative performance impacts.
The solution is to treat the summaries identically for "new" and "old":
- save them in SET
- leave them alone otherwise
- restore the saved values in RESTORE
Also minor changes:
- expand _FPU_MASK_RN to 64bit hex, to match other MASKs
- treat bit 52 (left-to-right) as reserved (since it is)
* sysdeps/powerpc/fpu/fenv_private.h (_FPU_MASK_TRAPS_RN):
(_FPU_MASK_FRAC_INEX_RET_CC): Fix masks to more properly handle
summary bits.
(_FPU_MASK_RN): Expand _FPU_MASK_RN to 64bit hex.
(_FPU_MASK_NOT_RN_NI): Treat bit 52 (left-to-right) as reserved.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
[BZ #16777]
* localedata/locales/pl_PL (LC_MONETARY): Use U+202F as mon_thousands_sep
and improve readability by using more ASCII.
* localedata/locales/pl_PL (LC_NUMERIC): Use U+202F as thousands_sep
and improve readability by using more ASCII.
