This patch fixes an issue observed by the Xen project, where including
signal.h exposes various PSR_MODE #defines. This is due to the usage
in sys/user.h and sys/procfs.h of the struct user_pt_regs and
user_fpsimd_state included via asm/ptrace.h. The namespace pollution
this inclusion introduce is already partially fixed with some #undef
of the PTRACE_* symbols, but other symbols like the PSR_MODE ones are
still present, and undefining them is not safe since a user can
include ptrace.h before user.h.
My proposition is to define the 2 structures we need in user.h and get
rid of the asm/ptrace.h inclusion.
Build and make check are clean on AArch64.
2014-05-20 Will Newton <will.newton@linaro.org>
Yvan Roux <yvan.roux@linaro.org>
* sysdeps/unix/sysv/linux/aarch64/sys/user.h: Remove unused
#include of asm/ptrace.h.
(PTRACE_GET_THREAD_AREA): Remove #undef.
(PTRACE_GETHBPREGS): Likewise.
(PTRACE_SETHBPREGS): Likewise.
(struct user_regs_struct): New structure.
(struct user_fpsimd_struct): New structure.
* sysdeps/unix/sysv/linux/aarch64/sys/procfs.h: Remove unused
#include of asm/ptrace.h and second #include of sys/user.h.
(PTRACE_GET_THREAD_AREA): Remove #undef.
(PTRACE_GETHBPREGS): Likewise.
(PTRACE_SETHBPREGS): Likewise.
(ELF_NGREG): Use new struct user_regs_struct.
(elf_fpregset_t): Use new struct user_fpsimd_struct.
Commit 7d92b78723 [Fix ARM NAN fraction
bits.] removed all the bits set from NANFRAC macros and, when propagated
to libgcc, regressed gcc.dg/torture/builtin-math-7.c on soft-fp arm-eabi
targets, currently ARMv6-M (`-march=armv6-m -mthumb') only. This is
because when used to construct a NaN in the semi-raw mode, they now
build an infinity instead. Consequently operations such as (Inf - Inf)
now produce Inf rather than NaN. The change worked for the original
test case, posted with PR libgcc/60166, because division is made in the
canonical mode, where the quiet bit is set separately, from the fp
class.
This change brings the quiet bit back to these macros, making semi-raw
mode calculations produce the expected results again.
glibc's Makeconfig defines some variables such as $(libm) and $(libdl)
for linking with libraries built by glibc, and nptl/Makeconfig
(included by the toplevel Makeconfig) defines others such as
$(shared-thread-library).
In some places glibc's Makefiles use those variables when linking
against the relevant libraries, but in other places they hardcode the
location of the libraries in the build tree. This patch cleans up
various places to use the variables that already exist (in the case of
libm, replacing several duplicate definitions of a $(link-libm)
variable in subdirectory Makefiles). (It's not necessarily exactly
equivalent to what the existing code does - in particular,
$(shared-thread-library) includes libpthread_nonshared, but is
replacing places that just referred to libpthread.so. But I think
that change is desirable on the general principle of linking things as
close as possible to the way in which they would be linked with an
installed library, unless there is a clear reason not to do so.)
To support running tests with an installed copy of glibc without
needing the full build tree from when that copy was built, I think it
will be useful to use such variables more generally and systematically
- every time the rules for building a test refer to some file from the
build tree that's also installed by glibc, use a makefile variable so
that the installed-testing case can point those variables to installed
copies of the files. This patch just deals with straightforward cases
where such variables already exist.
It's quite possible some uses of $(shared-thread-library) should
actually be a new $(thread-library) variable that's set appropriately
in the --disable-shared case, if those uses would in fact work without
shared libraries. I didn't change the status quo that those cases
hardcode use of a shared library whether or not it's actually needed
(but other uses such as $(libm) and $(libdl) would now get the static
library if the shared library isn't built, when some previously
hardcoded use of the shared library - if they actually need shared
libraries, the test itself needs an enable-shared conditional anyway).
Tested x86_64.
* benchtests/Makefile
($(addprefix $(objpfx)bench-,$(bench-math))): Depend on $(libm),
not $(common-objpfx)math/libm.so.
($(addprefix $(objpfx)bench-,$(bench-pthread))): Depend on
$(shared-thread-library), not $(common-objpfx)nptl/libpthread.so.
* elf/Makefile ($(objpfx)noload): Depend on $(libdl), not
$(common-objpfx)dlfcn/libdl.so.
($(objpfx)tst-audit8): Depend on $(libm), not
$(common-objpfx)math/libm.so.
* malloc/Makefile ($(objpfx)libmemusage.so): Depend on $(libdl),
not $(common-objpfx)dlfcn/libdl.so.
* math/Makefile
($(addprefix $(objpfx),$(filter-out $(tests-static),$(tests)))):
Depend on $(libm), not $(objpfx)libm.so. Do not condition on
[$(build-shared) = yes].
($(objpfx)test-fenv-tls): Depend on $(shared-thread-library), not
$(common-objpfx)nptl/libpthread.so.
* misc/Makefile ($(objpfx)tst-tsearch): Depend on $(libm), not
$(common-objpfx)math/libm.so$(libm.so-version) or
$(common-objpfx)math/libm.a depending on [$(build-shared) = yes].
* nptl/Makefile ($(objpfx)tst-unload): Depend on $(libdl), not
$(common-objpfx)dlfcn/libdl.so.
* setjmp/Makefile (link-libm): Remove variable.
($(objpfx)tst-setjmp-fp): Depend on $(libm), not $(link-libm).
* stdio-common/Makefile (link-libm): Remove variable.
($(objpfx)tst-printf-round): Depend on $(libm), not $(link-libm).
* stdlib/Makefile (link-libm): Remove variable.
($(objpfx)bug-getcontext): Depend on $(libm), not $(link-libm).
($(objpfx)tst-strtod-round): Likewise.
($(objpfx)tst-tininess): Likewise.
($(objpfx)tst-strtod-underflow): Likewise.
($(objpfx)tst-strtod6): Likewise.
($(objpfx)tst-tls-atexit): Depend on $(shared-thread-library) and
$(libdl), not $(common-objpfx)nptl/libpthread.so and
$(common-objpfx)dlfcn/libdl.so.
This patch guard the BSD definition for terminal modes in PowerPC
specific header fixing the following conformance failures:
FAIL: conform/POSIX/termios.h/conform
FAIL: conform/POSIX2008/termios.h/conform
FAIL: conform/UNIX98/termios.h/conform
prlimit and prlimit64 have been added in the main <bits/resource.h>, but
not in the SPARC specific version. Fix that.
Note: this is Debian bug#703559, reported by Emilio Pozuelo Monfort
<pochu@debian.org>
If the fd refers to a terminal device, but not a pty master, the
TIOCGPTN ioctl returns with ENOTTY. This error is not caught, and the
possibly undefined buffer passed to ptsname_r is sent directly to the
stat64 syscall.
Fix this by using a fallback to the old method only if the TIOCGPTN
ioctl fails with EINVAL. This also fix the return value in that specific
case (it return ENOENT without this patch).
Also add tests to the ptsname_r function (and ptsname at the same time).
Note: this is Debian bug#741482, reported by Jakub Wilk <jwilk@debian.org>
getaddrinfo correctly returns EAI_AGAIN for AF_INET and AF_INET6
queries. For AF_UNSPEC however, an older change
(a682a1bf55) broke the check and due to
that the returned error was EAI_NONAME.
This patch fixes the check so that a non-authoritative not-found is
returned as EAI_AGAIN to the user instead of EAI_NONAME.
The upstream version of GMP has long removed this conditional
altogether in this commit:
changeset: 5254:88618a4694ac
user: Kevin Ryde <user42@zip.com.au>
date: Sun Jun 17 01:37:27 2001 +0200
So just turn the #if into an #ifdef to silence the warning.
ChangeLog:
2014-05-14 Will Newton <will.newton@linaro.org>
* stdlib/gmp-impl.h: Test USE_STACK_ALLOC #ifdef
rather than #if.
Bug 16564 is spurious overflow of log1pl (LDBL_MAX) in FE_UPWARD mode,
resulting from log1pl adding 1 to its argument (for arguments not
close to 0), which overflows in that mode. This patch fixes this by
avoiding adding 1 to large arguments (precisely what counts as large
depends on the floating-point format).
Tested x86_64 and x86, and spot-checked log1pl tests on mips64 and
powerpc64.
[BZ #16564]
* sysdeps/i386/fpu/s_log1pl.S (__log1pl): Do not add 1 to positive
arguments with exponent 65 or above.
* sysdeps/ieee754/ldbl-128/s_log1pl.c (__log1pl): Do not add 1 to
arguments 0x1p113L or above.
* sysdeps/ieee754/ldbl-128ibm/s_log1pl.c (__log1pl): Do not add 1
to arguments 0x1p107L or above.
* sysdeps/x86_64/fpu/s_log1pl.S (__log1pl): Do not add 1 to
positive arguments with exponent 65 or above.
* math/auto-libm-test-in: Add more tests of log1p.
* math/auto-libm-test-out: Regenerated.
According to C99/C11 Annex G, cacos applied to a value with real part
+Inf and finite imaginary part should produce a result with real part
+0. glibc wrongly produces a result with real part -0 in FE_DOWNWARD
mode. This patch fixes this by checking for zero results in the
relevant case of non-finite arguments (where there should never be a
result with -0 real part), and converts the tests of cacos to
ALL_RM_TEST.
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16928]
* math/s_cacos.c (__cacos): Ensure zero real part of result from
non-finite arguments is +0.
* math/s_cacosf.c (__cacosf): Likewise.
* math/s_cacosl.c (__cacosl): Likewise.
* math/libm-test.inc (cacos_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
According to C99 and C11 Annex F, acosh (1) should be +0 in all
rounding modes. However, some implementations in glibc wrongly return
-0 in round-downward mode (which is what you get if you end up
computing log1p (-0), via 1 - 1 being -0 in round-downward mode).
This patch fixes the problem implementations, by correcting the test
for an exact 1 value in the ldbl-96 implementation to allow for the
explicit high bit of the mantissa, and by inserting fabs instructions
in the i386 implementations; tests of acosh are duly converted to
ALL_RM_TEST. I believe all the other sysdeps/ieee754 implementations
are already OK (I haven't checked the ia64 versions, but if buggy then
that will be obvious from the results of test runs after this patch is
in).
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16927]
* sysdeps/i386/fpu/e_acosh.S (__ieee754_acosh): Use fabs on x-1
value.
* sysdeps/i386/fpu/e_acoshf.S (__ieee754_acoshf): Likewise.
* sysdeps/i386/fpu/e_acoshl.S (__ieee754_acoshl): Likewise.
* sysdeps/ieee754/ldbl-96/e_acoshl.c (__ieee754_acoshl): Correct
for explicit high bit of mantissa when testing for argument equal
to 1.
* math/libm-test.inc (acosh_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Bug 16516 reports spurious underflows from erf (for all floating-point
types), when the result is close to underflowing but does not actually
underflow.
erf (x) is about (2/sqrt(pi))*x for x close to 0, so there are
subnormal arguments for which it does not underflow. The various
implementations do (x + efx*x) (for efx = 2/sqrt(pi) - 1), for greater
accuracy than if just using a single multiplication by an
approximation to 2/sqrt(pi) (effectively, this way there are a few
more bits in the approximation to 2/sqrt(pi)). This can introduce
underflows when efx*x underflows even though the final result does
not, so a scaled calculation with 8*efx is done in these cases - but 8
is not a big enough scale factor to avoid all such underflows. 16 is
(any underflows with a scale factor of 16 would only occur when the
final result underflows), so this patch changes the code to use that
factor. Rather than recomputing all the values of the efx8 variable,
it is removed, leaving it to the compiler's constant folding to
compute 16*efx. As such scaling can also lose underflows when the
final scaling down happens to be exact, appropriate checks are added
to ensure underflow exceptions occur when required in such cases.
Tested x86_64 and x86; no ulps updates needed. Also spot-checked for
powerpc32 and mips64 to verify the changes to the ldbl-128ibm and
ldbl-128 implementations.
[BZ #16516]
* sysdeps/ieee754/dbl-64/s_erf.c (efx8): Remove variable.
(__erf): Scale by 16 instead of 8 in potentially underflowing
case. Ensure exception if result actually underflows.
* sysdeps/ieee754/flt-32/s_erff.c (efx8): Remove variable.
(__erff): Scale by 16 instead of 8 in potentially underflowing
case. Ensure exception if result actually underflows.
* sysdeps/ieee754/ldbl-128/s_erfl.c: Include <float.h>.
(efx8): Remove variable.
(__erfl): Scale by 16 instead of 8 in potentially underflowing
case. Ensure exception if result actually underflows.
* sysdeps/ieee754/ldbl-128ibm/s_erfl.c: Include <float.h>.
(efx8): Remove variable.
(__erfl): Scale by 16 instead of 8 in potentially underflowing
case. Ensure exception if result actually underflows.
* sysdeps/ieee754/ldbl-96/s_erfl.c: Include <float.h>.
(efx8): Remove variable.
(__erfl): Scale by 16 instead of 8 in potentially underflowing
case. Ensure exception if result actually underflows.
* math/auto-libm-test-in: Add more tests of erf.
* math/auto-libm-test-out: Regenerated.
This patch reduces duplication between different architectures'
kernel-features.h files by making the architecture-independent file
define various macros unconditionally (instead of only for a
particular list of architectures), with the architecture-specific
files then undefining the macros if necessary.
Specifically, __ASSUME_O_CLOEXEC (O_CLOEXEC flag to open) and
__ASSUME_SOCK_CLOEXEC (SOCK_NONBLOCK and SOCK_CLOEXEC flags to socket)
are supported on all architectures as of 2.6.32 or the minimum kernel
version for the architecture if later. For __ASSUME_IN_NONBLOCK,
__ASSUME_PIPE2, __ASSUME_EVENTFD2, __ASSUME_SIGNALFD4 and
__ASSUME_DUP3, the relevant syscalls were added for alpha in 2.6.33
but otherwise the features are available as of 2.6.32. For
__ASSUME_UTIMES, support is everywhere in 2.6.32 except for
asm-generic architectures and hppa.
Although those were the main cases of duplication among
kernel-features.h files, some other cases of unnecessary definitions
were also cleaned up: the hppa file defined various macros that were
either no longer used at all, or defined by the main file by default
anyway, the ia64 file had duplicative definitions of __ASSUME_PSELECT
and __ASSUME_PPOLL, while mips had such a definition of
__ASSUME_IPC64.
Really, rather than being defined in the main file then undefined for
asm-generic architectures, __ASSUME_UTIMES should become an
hppa-specific macro. Given that __ASSUME_ATFCTS and
__ASSUME_UTIMENSAT are now always true, the only live __ASSUME_UTIMES
conditional is in sysdeps/unix/sysv/linux/utimes.c, which is not used
for asm-generic architectures. I think the desired state would be an
hppa-specific file (that includes sysdeps/unix/sysv/linux/utimes.c if
__ASSUME_UTIMES, and otherwise has fallback code), with the fallback
code being removed from the main utimes.c. But I think that's most
reasonably a separate cleanup once __ASSUME_ATFCTS and
__ASSUME_UTIMESAT have both had conditional code cleaned up.
Given this patch, I think it's straightforward to move non-ex-ports
architectures to having their own kernel-features.h files, like
ex-ports architectures, rather than conditionals in the main file
(i.e., such a move won't require the architecture-specific file to
contain anything that isn't genuinely architecture-specific), and
would encourage architecture maintainers to do so.
Tested x86_64 that the installed shared libraries are unchanged by
this patch. Note that on some architectures this *will* cause
__ASSUME_* macros to be defined in cases where they weren't previously
but should have been (but this is just optimization, not a fix to a
user-visible bug, so doesn't need a bug report in Bugzilla).
* sysdeps/unix/sysv/linux/kernel-features.h (__ASSUME_UTIMES):
Define unconditionally.
(__ASSUME_O_CLOEXEC): Likewise.
(__ASSUME_SOCK_CLOEXEC): Likewise.
(__ASSUME_IN_NONBLOCK): Likewise.
(__ASSUME_PIPE2): Likewise.
(__ASSUME_EVENTFD2): Likewise.
(__ASSUME_SIGNALFD4): Likewise.
(__ASSUME_DUP3): Likewise.
* sysdeps/unix/sysv/linux/aarch64/kernel-features.h
(__ASSUME_DUP3): Do not define.
(__ASSUME_EVENTFD2): Likewise.
(__ASSUME_IN_NONBLOCK): Likewise.
(__ASSUME_O_CLOEXEC): Likewise.
(__ASSUME_PIPE2): Likewise.
(__ASSUME_SIGNALFD4): Likewise.
(__ASSUME_SOCK_CLOEXEC): Likewise.
(__ASSUME_UTIMES): Undefine.
* sysdeps/unix/sysv/linux/alpha/kernel-features.h
(__ASSUME_UTIMES): Do not define.
(__ASSUME_O_CLOEXEC): Likewise.
(__ASSUME_SOCK_CLOEXEC): Likewise.
(__ASSUME_IN_NONBLOCK): Undefine if [__LINUX_KERNEL_VERSION <
0x020621] instead of defining if [__LINUX_KERNEL_VERSION >=
0x020621].
(__ASSUME_PIPE2): Likewise.
(__ASSUME_EVENTFD2): Likewise.
(__ASSUME_SIGNALFD4): Likewise.
[__LINUX_KERNEL_VERSION < 0x020621] (__ASSUME_DUP3): Undefine.
* sysdeps/unix/sysv/linux/arm/kernel-features.h (__ASSUME_UTIMES):
Do not define.
(__ASSUME_EVENTFD2): Likewise.
(__ASSUME_SIGNALFD4): Likewise.
* sysdeps/unix/sysv/linux/hppa/kernel-features.h
(__ASSUME_32BITUIDS): Likewise.
(__ASSUME_TRUNCATE64_SYSCALL): Likewise.
(__ASSUME_IPC64): Likewise.
(__ASSUME_ST_INO_64_BIT): Likewise.
(__ASSUME_GETDENTS64_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION < 0x030e00] (__ASSUME_UTIMES): Undefine.
* sysdeps/unix/sysv/linux/ia64/kernel-features.h
(__ASSUME_UTIMES): Do not define.
(__ASSUME_PSELECT): Likewise.
(__ASSUME_PPOLL): Likewise.
(__ASSUME_O_CLOEXEC): Likewise.
(__ASSUME_SOCK_CLOEXEC): Likewise.
(__ASSUME_IN_NONBLOCK): Likewise.
(__ASSUME_PIPE2): Likewise.
(__ASSUME_EVENTFD2): Likewise.
(__ASSUME_SIGNALFD4): Likewise.
(__ASSUME_DUP3): Likewise.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h
(__ASSUME_UTIMES): Likewise.
(__ASSUME_O_CLOEXEC): Likewise.
(__ASSUME_SOCK_CLOEXEC): Likewise.
(__ASSUME_IN_NONBLOCK): Likewise.
(__ASSUME_PIPE2): Likewise.
(__ASSUME_EVENTFD2): Likewise.
(__ASSUME_SIGNALFD4): Likewise.
(__ASSUME_DUP3): Likewise.
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
(__ASSUME_UTIMES): Likewise.
(__ASSUME_O_CLOEXEC): Likewise.
(__ASSUME_SOCK_CLOEXEC): Likewise.
(__ASSUME_IN_NONBLOCK): Likewise.
(__ASSUME_PIPE2): Likewise.
(__ASSUME_EVENTFD2): Likewise.
(__ASSUME_SIGNALFD4): Likewise.
(__ASSUME_DUP3): Likewise.
* sysdeps/unix/sysv/linux/mips/kernel-features.h (__ASSUME_IPC64):
Likewise.
(__ASSUME_UTIMES): Likewise.
(__ASSUME_EVENTFD2): Likewise.
(__ASSUME_SIGNALFD4): Likewise.
* sysdeps/unix/sysv/linux/tile/kernel-features.h
(__ASSUME_O_CLOEXEC): Likewise.
(__ASSUME_SOCK_CLOEXEC): Likewise.
(__ASSUME_IN_NONBLOCK): Likewise.
(__ASSUME_PIPE2): Likewise.
(__ASSUME_EVENTFD2): Likewise.
(__ASSUME_SIGNALFD4): Likewise.
(__ASSUME_DUP3): Likewise.
(__ASSUME_UTIMES): Undefine.
This patch cleans up some symbol versioning code in the ARM port that
exists only as relics of the old-ABI port, which was removed some time
ago.
The minimum symbol version in the ARM port is GLIBC_2.4 (the version
where the EABI port was introduced). Thus, any SHLIB_COMPAT
conditionals where the later version is 2.4 or later are obsolete and
can be removed. In addition, there is no need to set symbol versions
before 2.4 explicitly if the symbols would have a version of 2.4 by
default anyway. This includes most of the entries in
sysdeps/unix/sysv/linux/arm/Versions: those for GLIBC_2.0 are for
libgcc unwind functions that aren't actually in ARM EABI glibc at all,
while those for GLIBC_2.2 and GLIBC_2.3.3 are for functions which for
the old-ABI port may have had versions different from the
architecture-independent default, but where for EABI the default
suffices (both the default and the version in that file map to 2.4, so
the entries in that file do nothing). The GLIBC_2.1 entries are
needed (architecture-specific functions), but it seems less confusing
for those to say GLIBC_2.4, as the actual version those symbols in
fact have.
Various cases in the <fenv.h> functions where a function is defined as
__fe* with an fe* versioned alias are cleaned up just to define fe*
directly, as done e.g. on AArch64. If in future we actually need an
__fe* name for use from C90 functions in libm as discussed recently,
of course we can add one on all architectures and make the fe* name
into a weak alias for that particular function, but for now the __fe*
names aren't needed.
In the case of posix_fadvise64, the __posix_fadvise64_l64 name and
posix_fadvise64 alias are kept as __posix_fadvise64_l64 is used in
posix_fadvise. (For that to be a namespace-clean use, posix_fadvise64
needs to be a *weak* alias not a strong one as at present, but that's
an independent preexisting bug.)
(There remain references to GLIBC_2_2 in
sysdeps/unix/sysv/linux/arm/{msgctl.c,semctl.c,shmctl.c}. As those
files are used by alpha which has a genuine 2.2 version for those
functions, I think those references need to stay as-is.)
Tested that the disassembly of installed shared libraries is unchanged
by this patch (though function names shown in disassembly change to no
longer have @@GLIBC_2.4, now those functions get versioned only by the
version map and not redundantly at assembler time) and that the ABI
tests pass.
* sysdeps/arm/fclrexcpt.c (__feclearexcept): Rename to
feclearexcept. Remove symbol versioning code.
* sysdeps/arm/fegetenv.c (__fegetenv): Rename to fegetenv. Remove
symbol versioning code.
* sysdeps/arm/fesetenv.c (__fesetenv): Rename to fesetenv. Remove
symbol versioning code.
* sysdeps/arm/feupdateenv.c (__feupdateenv): Rename to
feupdateenv. Remove symbol versioning code.
* sysdeps/arm/fgetexcptflg.c (__fegetexceptflag): Rename to
fegetexceptflag. Remove symbol versioning code.
* sysdeps/arm/fsetexcptflg.c (__fesetexceptflag): Rename to
fesetexceptflag. Remove symbol versioning code.
* sysdeps/unix/sysv/linux/arm/Versions (libc): Remove GLIBC_2.0,
GLIBC_2.2 and GLIBC_2.3.3 entries. Change GLIBC_2.1 to GLIBC_2.4.
* sysdeps/unix/sysv/linux/arm/posix_fadvise64.c
(__posix_fadvise64_l32): Remove prototype.
[SHLIB_COMPAT(libc, GLIBC_2_2, GLIBC_2_3_3)]: Remove conditional
code.
