AuroraMiddleware/glibc
1
0
Fork 0
mirror of https://sourceware.org/git/glibc.git synced 2024-11-26 06:50:07 +00:00
Code Issues Packages Projects Releases Wiki Activity
41,138 Commits 334 Branches 1,646 Tags 278 MiB
da61ba3f89
Commit Graph

547 Commits

Author SHA1 Message Date
Patrick McGehearty
a14d8acd32 Improves __ieee754_exp(x) performance by 18-37% when |x| < 1.0397 
Adds a fast path to e_exp.c when |x| < 1.03972053527832.
When values are tested in isolation, reduction in execution
time is: aarch 30%, sparc 18%, x86 37%.
When comparing benchtests/bench.out which includes values
outside that range, the gains are:
aarch 8%, sparc 5%, x86 9%.

make check is clean (no increase in ulp for any math test).
Testing 20M values for each rounding mode in that range shows
approximately one in 200 values is off by 1 ulp. No value tested
for exp(x) changed by 2 or more ulp.

No observed change in performance or accuracy for x outside
fast path range.

These changes will be active for all platforms that don't provide
their own exp() routines. They will also be active for ieee754
versions of ccos, ccosh, cosh, csin, csinh, sinh, exp10, gamma, and
erf.
 2018-04-15 18:46:37 -04:00
Wilco Dijkstra
e88ecbbfe8 [PATCH 7/7] sin/cos slow paths: refactor sincos implementation 
Refactor the sincos implementation - rather than rely on odd partial inlining
of preprocessed portions from sin and cos, explicitly write out the cases.
This makes sincos much easier to maintain and provides an additional 16-20%
speedup between 0 and 2^27.  The overall speedup of sincos is 48% over this range.
Between 0 and PI it is 66% faster.

	* sysdeps/ieee754/dbl-64/s_sin.c (__sin): Cleanup ifdefs.
	(__cos): Likewise.
	* sysdeps/ieee754/dbl-64/s_sin.c (__sincos): Refactor using the same
	logic as sin and cos.
 2018-04-03 16:52:18 +01:00
Wilco Dijkstra
aef3e2558a [PATCH 6/7] sin/cos slow paths: refactor duplicated code into dosin 
Refactor duplicated code into do_sin.  Since all calls to do_sin use copysign to
set the sign of the result, move it inside do_sin.  Small inputs use a separate
polynomial, so move this into do_sin as well (the check is based on the more
conservative case when doing large range reduction, but could be relaxed).

	* sysdeps/ieee754/dbl-64/s_sin.c (do_sin): Use TAYLOR_SIN for small
	inputs.  Return correct sign.
	(do_sincos): Remove small input check before do_sin, let do_sin set
	the sign.
	(__sin): Likewise.
	(__cos): Likewise.
 2018-04-03 16:52:17 +01:00
Wilco Dijkstra
72f6e9a3e3 [PATCH 5/7] sin/cos slow paths: remove unused slowpath functions 
Remove all unused slowpath functions.

	* sysdeps/ieee754/dbl-64/s_sin.c (TAYLOR_SLOW): Remove.
	(do_cos_slow): Likewise.
	(do_sin_slow): Likewise.
	(reduce_and_compute): Likewise.
	(slow): Likewise.
	(slow1): Likewise.
	(slow2): Likewise.
	(sloww): Likewise.
	(sloww1): Likewise.
	(sloww2): Likewise.
	(bslow): Likewise.
	(bslow1): Likewise.
	(bslow2): Likewise.
	(cslow2): Likewise.
 2018-04-03 16:52:17 +01:00
Wilco Dijkstra
649095838b [PATCH 4/7] sin/cos slow paths: remove slow paths from huge range reduction 
For huge inputs use the improved do_sincos function as well.  Now no cases use
the correction factor returned by do_sin, do_cos and TAYLOR_SIN, so remove it.

	* sysdeps/ieee754/dbl-64/s_sin.c (TAYLOR_SIN): Remove cor parameter.
	(do_cos): Remove corp parameter and calculations.
	(do_sin): Likewise.
	(do_sincos): Remove cor variable.
	(__sin): Use do_sincos for huge inputs.
	(__cos): Likewise.
	* sysdeps/ieee754/dbl-64/s_sincos.c (__sincos): Likewise.
	(reduce_and_compute_sincos): Remove unused function.
 2018-04-03 16:52:17 +01:00
Wilco Dijkstra
d9469deb14 [PATCH 3/7] sin/cos slow paths: remove slow paths from small range reduction 
This patch improves the accuracy of the range reduction.  When the input is
large (2^27) and very close to a multiple of PI/2, using 110 bits of PI is not
enough.  Improve range reduction accuracy to 136 bits.  As a result the special
checks for results close to zero can be removed.  The ULP of the polynomials is
at worst 0.55ULP, so there is no reason for the slow functions, and they can be
removed.

	* sysdeps/ieee754/dbl-64/s_sin.c (reduce_sincos_1): Rename to
	reduce_sincos, improve accuracy to 136 bits.
	(do_sincos_1): Rename to do_sincos, remove fallbacks to slow functions.
	(__sin): Use improved reduction and simplified do_sincos calculation.
	(__cos): Likewise.
	* sysdeps/ieee754/dbl-64/s_sincos.c (__sincos): Likewise.
 2018-04-03 16:52:17 +01:00
Wilco Dijkstra
7a5640f23a [PATCH 2/7] sin/cos slow paths: remove large range reduction 
This patch removes the large range reduction code and defers to the huge range
reduction code.  The first level range reducer supports inputs up to 2^27,
which is way too large given that inputs for sin/cos are typically small
(< 10), and optimizing for a smaller range would give a significant speedup.

Input values above 2^27 are practically never used, so there is no reason for
supporting range reduction between 2^27 and 2^48.  Removing it significantly
simplifies code and enables further speedups.  There is about a 2.3x slowdown
in this range due to __branred being extremely slow  (a better algorithm could
easily more than double performance).

	* sysdeps/ieee754/dbl-64/s_sin.c (reduce_sincos_2): Remove function.
	(do_sincos_2): Likewise.
	(__sin): Remove middle range reduction case.
	(__cos): Likewise.
	* sysdeps/ieee754/dbl-64/s_sincos.c (__sincos): Remove middle range
	reduction case.
 2018-04-03 16:52:17 +01:00
Wilco Dijkstra
19a8b9a300 [PATCH 1/7] sin/cos slow paths: avoid slow paths for small inputs 
This series of patches removes the slow patchs from sin, cos and sincos.
Besides greatly simplifying the implementation, the new version is also much
faster for inputs up to PI (41% faster) and for large inputs needing range
reduction (27% faster).

ULP is ~0.55 with no errors found after testing 1.6 billion inputs across most
of the range with mpsin and mpcos.  The number of incorrectly rounded results
(ie. ULP >0.5) is at most ~2750 per million inputs between 0.125 and 0.5,
the average is ~850 per million between 0 and PI.

Tested on AArch64 and x86_64 with no regressions.

The first patch removes the slow paths for the cases where the input is small
and doesn't require range reduction.  Update ULP tables for sin, cos and sincos
on AArch64 and x86_64.

	* sysdeps/aarch64/libm-test-ulps: Update ULP for sin, cos, sincos.
	* sysdeps/ieee754/dbl-64/s_sin.c (__sin): Remove slow paths for small
	inputs.
	(__cos): Likewise.
	* sysdeps/x86_64/fpu/libm-test-ulps: Update ULP for sin, cos, sincos.
 2018-04-03 16:52:16 +01:00
Joseph Myers
8d3f9e85cf Add narrowing subtract functions. 
This patch adds the narrowing subtract functions from TS 18661-1 to
glibc's libm: fsub, fsubl, dsubl, f32subf64, f32subf32x, f32xsubf64
for all configurations; f32subf64x, f32subf128, f64subf64x,
f64subf128, f32xsubf64x, f32xsubf128, f64xsubf128 for configurations
with _Float64x and _Float128; __nldbl_dsubl for ldbl-opt.

The changes are essentially the same as for the narrowing add
functions, so the description of those generally applies to this patch
as well.

Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft
float) and powerpc, and with build-many-glibcs.py.

	* math/Makefile (libm-narrow-fns): Add sub.
	(libm-test-funcs-narrow): Likewise.
	* math/Versions (GLIBC_2.28): Add narrowing subtract functions.
	* math/bits/mathcalls-narrow.h (sub): Use __MATHCALL_NARROW.
	* math/gen-auto-libm-tests.c (test_functions): Add sub.
	* math/math-narrow.h (CHECK_NARROW_SUB): New macro.
	(NARROW_SUB_ROUND_TO_ODD): Likewise.
	(NARROW_SUB_TRIVIAL): Likewise.
	* sysdeps/ieee754/float128/float128_private.h (__fsubl): New
	macro.
	(__dsubl): Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fsub and
	dsub.
	(CFLAGS-nldbl-dsub.c): New variable.
	(CFLAGS-nldbl-fsub.c): Likewise.
	* sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add
	__nldbl_dsubl.
	* sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_dsubl): New
	prototype.
	* manual/arith.texi (Misc FP Arithmetic): Document fsub, fsubl,
	dsubl, fMsubfN, fMsubfNx, fMxsubfN and fMxsubfNx.
	* math/auto-libm-test-in: Add tests of sub.
	* math/auto-libm-test-out-narrow-sub: New generated file.
	* math/libm-test-narrow-sub.inc: New file.
	* sysdeps/i386/fpu/s_f32xsubf64.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_f32xsubf64.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_fsub.c: Likewise.
	* sysdeps/ieee754/float128/s_f32subf128.c: Likewise.
	* sysdeps/ieee754/float128/s_f64subf128.c: Likewise.
	* sysdeps/ieee754/float128/s_f64xsubf128.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_dsubl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_f64xsubf128.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_fsubl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_dsubl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_fsubl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_dsubl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_fsubl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-dsub.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-fsub.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_dsubl.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_fsub.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_fsubl.c: Likewise.
	* sysdeps/powerpc/fpu/libm-test-ulps: Update.
	* sysdeps/mach/hurd/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2018-03-20 00:34:52 +00:00
Wilco Dijkstra
f67a8147b0 Rename all __ieee754_sqrt(f/l) calls to sqrt(f/l) 
Use sqrt(f/l) to enable inlining by GCC - if inlining doesn't happen,
the asm redirect ensures we will still call __ieee754_sqrt(f/l).

	* sysdeps/ieee754/dbl-64/e_acosh.c (__ieee754_acosh): Use sqrt.
	* sysdeps/ieee754/dbl-64/e_gamma_r.c (gamma_positive): Likewise.
	* sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Likewise.
	* sysdeps/ieee754/dbl-64/e_j0.c (__ieee754_j0): Likewise.
	* sysdeps/ieee754/dbl-64/e_j1.c (__ieee754_j1): Likewise.
	* sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise.
	* sysdeps/ieee754/dbl-64/s_asinh.c (__asinh): Likewise.
	* sysdeps/ieee754/dbl-64/wordsize-64/e_acosh.c (__ieee754_acosh): Likewise.
	* sysdeps/ieee754/flt-32/e_acosf.c (__ieee754_acosf): Likewise.
	* sysdeps/ieee754/flt-32/e_acoshf.c (__ieee754_acoshf): Likewise.
	* sysdeps/ieee754/flt-32/e_asinf.c (__ieee754_asinf): Likewise.
	* sysdeps/ieee754/flt-32/e_gammaf_r.c (gammaf_positive): Likewise.
	* sysdeps/ieee754/flt-32/e_hypotf.c (__ieee754_hypotf): Likewise.
	* sysdeps/ieee754/flt-32/e_j0f.c (__ieee754_j0f): Likewise.
	* sysdeps/ieee754/flt-32/e_j1f.c (__ieee754_j1f): Likewise.
	* sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Likewise.
	* sysdeps/ieee754/flt-32/s_asinhf.c (__asinhf): Likewise.
	* sysdeps/ieee754/ldbl-128/e_acoshl.c (__ieee754_acoshl): Use sqrtl.
	* sysdeps/ieee754/ldbl-128/e_acosl.c (__ieee754_acosl): Likewise.
	* sysdeps/ieee754/ldbl-128/e_asinl.c (__ieee754_asinl): Likewise.
	* sysdeps/ieee754/ldbl-128/e_gammal_r.c (gammal_positive): Likewise.
	* sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl): Likewise.
	* sysdeps/ieee754/ldbl-128/e_j0l.c (__ieee754_j0l): Likewise.
	* sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_j1l): Likewise.
	* sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise.
	* sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_asinhl.c (__ieee754_asinhl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_acoshl.c (__ieee754_acoshl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_acosl.c (__ieee754_acosl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_asinl.c (__ieee754_asinl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (gammal_positive): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_hypotl.c (__ieee754_hypotl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_j0l.c (__ieee754_j0l): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_j1l.c (__ieee754_j1l): Likewise
	* sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_asinhl.c (__ieee754_asinhl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_acoshl.c (__ieee754_acoshl): Use sqrtl.
	* sysdeps/ieee754/ldbl-96/e_asinl.c (__ieee754_asinl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_gammal_r.c (gammal_positive): Likewise.
	* sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_j0l.c (__ieee754_j0l): Likewise.
	* sysdeps/ieee754/ldbl-96/e_j1l.c (__ieee754_j1l): Likewise.
	* sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_asinhl.c (__ieee754_asinhl): Likewise.
	* sysdeps/m68k/m680x0/fpu/e_pow.c (__ieee754_pow): Likewise.
	* sysdeps/powerpc/fpu/e_hypot.c (__ieee754_hypot): Likewise.
	* sysdeps/powerpc/fpu/e_hypotf.c (__ieee754_hypotf): Likewise.
 2018-03-15 19:21:36 +00:00
Wilco Dijkstra
610ee1fc93 Remove mplog and mpexp 
Remove the now unused mplog and mpexp files.

	* math/Makefile: Remove mpexp.c and mplog.c
	* sysdeps/i386/fpu/mpexp.c: Delete file.
	* sysdeps/i386/fpu/mplog.c: Likewise.
	* sysdeps/ia64/fpu/mpexp.c: Likewise.
	* sysdeps/ia64/fpu/mplog.c: Likewise.
	* sysdeps/ieee754/dbl-64/e_exp.c: Remove mention of mpexp and mplog.
	* sysdeps/ieee754/dbl-64/mpa.h (__pow_mp): Remove unused function.
	* sysdeps/ieee754/dbl-64/mpexp.c: Delete file.
	* sysdeps/ieee754/dbl-64/mplog.c: Likewise.
	* sysdeps/m68k/m680x0/fpu/mpexp.c: Likewise.
	* sysdeps/m68k/m680x0/fpu/mplog.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/Makefile: Remove mpexp* and mplog*.
	* sysdeps/x86_64/fpu/multiarch/e_log-avx.c: Remove unused defines.
	* sysdeps/x86_64/fpu/multiarch/e_log-fma.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/e_log-fma4.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/mpexp-avx.c: Delete file.
	* sysdeps/x86_64/fpu/multiarch/mpexp-fma.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/mpexp-fma4.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/mplog-avx.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/mplog-fma.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/mplog-fma4.c: Likewise.
 2018-02-15 12:41:05 +00:00
Szabolcs Nagy
de800d8305 Remove slow paths from exp 
Remove the __slowexp code, so exp is no longer correctly rounded.  The
result is computed to about 70 bits precision so the worst case ulp
error is about 0.500007 in nearest rounding mode.

	* manual/probes.texi: Remove slowexp probes.
	* math/Makefile: Remove slowexp.
	* sysdeps/generic/math_private.h (__slowexp): Remove.
	* sysdeps/ieee754/dbl-64/e_exp.c (__ieee754_exp): Remove __slowexp and
	document error bounds.
	* sysdeps/i386/fpu/slowexp.c: Remove.
	* sysdeps/ia64/fpu/slowexp.c: Remove.
	* sysdeps/ieee754/dbl-64/slowexp.c: Remove.
	* sysdeps/ieee754/dbl-64/uexp.h (err_0): Remove.
	* sysdeps/m68k/m680x0/fpu/slowexp.c: Remove.
	* sysdeps/powerpc/power4/fpu/Makefile (CPPFLAGS-slowexp.c): Remove.
	* sysdeps/x86_64/fpu/multiarch/Makefile: Remove slowexp-fma.
	* sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Remove.
	* sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Remove.
	* sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Remove.
	* sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Remove.
	* sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Remove.
	* sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Remove.
 2018-02-12 11:33:33 +00:00
Wilco Dijkstra
c3d466cba1 Remove slow paths from pow 
Remove the slow paths from pow.  Like several other double precision math
functions, pow is exactly rounded.  This is not required from math functions
and causes major overheads as it requires multiple fallbacks using higher
precision arithmetic if a result is close to 0.5ULP.  Ridiculous slowdowns
of up to 100000x have been reported when the highest precision path triggers.

All GLIBC math tests pass on AArch64 and x64 (with ULP of pow set to 1).
The worst case error is ~0.506ULP.  A simple test over a few hundred million
values shows pow is 10% faster on average.  This fixes BZ #13932.

	[BZ #13932]
	* sysdeps/ieee754/dbl-64/uexp.h (err_1): Remove.
	* benchtests/pow-inputs: Update comment for slow path cases.
	* manual/probes.texi (slowpow_p10): Delete removed probe.
	(slowpow_p10): Likewise.
	* math/Makefile: Remove halfulp.c and slowpow.c.
	* sysdeps/aarch64/libm-test-ulps: Set ULP of pow to 1.
	* sysdeps/generic/math_private.h (__exp1): Remove error argument.
	(__halfulp): Remove.
	(__slowpow): Remove.
	* sysdeps/i386/fpu/halfulp.c: Delete file.
	* sysdeps/i386/fpu/slowpow.c: Likewise.
	* sysdeps/ia64/fpu/halfulp.c: Likewise.
	* sysdeps/ia64/fpu/slowpow.c: Likewise.
	* sysdeps/ieee754/dbl-64/e_exp.c (__exp1): Remove error argument,
	improve comments and add error analysis.
	* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Add error analysis.
	(power1): Remove function:
	(log1): Remove error argument, add error analysis.
	(my_log2): Remove function.
	* sysdeps/ieee754/dbl-64/halfulp.c: Delete file.
	* sysdeps/ieee754/dbl-64/slowpow.c: Likewise.
	* sysdeps/m68k/m680x0/fpu/halfulp.c: Likewise.
	* sysdeps/m68k/m680x0/fpu/slowpow.c: Likewise.
	* sysdeps/powerpc/power4/fpu/Makefile: Remove CPPFLAGS-slowpow.c.
	* sysdeps/x86_64/fpu/libm-test-ulps: Set ULP of pow to 1.
	* sysdeps/x86_64/fpu/multiarch/Makefile: Remove slowpow-fma.c,
	slowpow-fma4.c, halfulp-fma.c, halfulp-fma4.c.
	* sysdeps/x86_64/fpu/multiarch/e_pow-fma.c (__slowpow): Remove define.
	* sysdeps/x86_64/fpu/multiarch/e_pow-fma4.c (__slowpow): Likewise.
	* sysdeps/x86_64/fpu/multiarch/halfulp-fma.c: Delete file.
	* sysdeps/x86_64/fpu/multiarch/halfulp-fma4.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/slowpow-fma.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/slowpow-fma4.c: Likewise.
 2018-02-12 10:47:09 +00:00
Joseph Myers
d8742dd82f Add narrowing add functions. 
This patch adds the narrowing add functions from TS 18661-1 to glibc's
libm: fadd, faddl, daddl, f32addf64, f32addf32x, f32xaddf64 for all
configurations; f32addf64x, f32addf128, f64addf64x, f64addf128,
f32xaddf64x, f32xaddf128, f64xaddf128 for configurations with
_Float64x and _Float128; __nldbl_daddl for ldbl-opt.  As discussed for
the build infrastructure patch, tgmath.h support is deliberately
deferred, and FP_FAST_* macros are not applicable without optimized
function implementations.

Function implementations are added for all relevant pairs of formats
(including certain cases of a format and itself where more than one
type has that format).  The main implementations use round-to-odd, or
a trivial computation in the case where both formats are the same or
where the wider format is IBM long double (in which case we don't
attempt to be correctly rounding).  The sysdeps/ieee754/soft-fp
implementations use soft-fp, and are used automatically for
configurations without exceptions and rounding modes by virtue of
existing Implies files.  As previously discussed, optimized versions
for particular architectures are possible, but not included.

i386 gets a special version of f32xaddf64 to avoid problems with
double rounding (similar to the existing fdim version), since this
function must round just once without an intermediate rounding to long
double.  (No such special version is needed for any other function,
because the nontrivial functions use round-to-odd, which does the
intermediate computation with the rounding mode set to round-to-zero,
and double rounding is OK except in round-to-nearest mode, so is OK
for that intermediate round-to-zero computation.)  mul and div will
need slightly different special versions for i386 (using round-to-odd
on long double instead of precision control) because of the
possibility of inexact intermediate results in the subnormal range for
double.

To reduce duplication among the different function implementations,
math-narrow.h gets macros CHECK_NARROW_ADD, NARROW_ADD_ROUND_TO_ODD
and NARROW_ADD_TRIVIAL.

In the trivial cases and for any architecture-specific optimized
implementations, the overhead of the errno setting might be
significant, but I think that's best handled through compiler built-in
functions rather than providing separate no-errno versions in glibc
(and likewise there are no __*_finite entry points for these function
provided, __*_finite effectively being no-errno versions at present in
most cases).

Tested for x86_64 and x86, with both GCC 6 and GCC 7.  Tested for
mips64 (all three ABIs, both hard and soft float) and powerpc with GCC
7.  Tested with build-many-glibcs.py with both GCC 6 and GCC 7.

	* math/Makefile (libm-narrow-fns): Add add.
	(libm-test-funcs-narrow): Likewise.
	* math/Versions (GLIBC_2.28): Add narrowing add functions.
	* math/bits/mathcalls-narrow.h (add): Use __MATHCALL_NARROW .
	* math/gen-auto-libm-tests.c (test_functions): Add add.
	* math/math-narrow.h (CHECK_NARROW_ADD): New macro.
	(NARROW_ADD_ROUND_TO_ODD): Likewise.
	(NARROW_ADD_TRIVIAL): Likewise.
	* sysdeps/ieee754/float128/float128_private.h (__faddl): New
	macro.
	(__daddl): Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fadd and
	dadd.
	(CFLAGS-nldbl-dadd.c): New variable.
	(CFLAGS-nldbl-fadd.c): Likewise.
	* sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add
	__nldbl_daddl.
	* sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_daddl): New
	prototype.
	* manual/arith.texi (Misc FP Arithmetic): Document fadd, faddl,
	daddl, fMaddfN, fMaddfNx, fMxaddfN and fMxaddfNx.
	* math/auto-libm-test-in: Add tests of add.
	* math/auto-libm-test-out-narrow-add: New generated file.
	* math/libm-test-narrow-add.inc: New file.
	* sysdeps/i386/fpu/s_f32xaddf64.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_f32xaddf64.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_fadd.c: Likewise.
	* sysdeps/ieee754/float128/s_f32addf128.c: Likewise.
	* sysdeps/ieee754/float128/s_f64addf128.c: Likewise.
	* sysdeps/ieee754/float128/s_f64xaddf128.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_daddl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_f64xaddf128.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_faddl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_daddl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_faddl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_daddl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_faddl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-dadd.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-fadd.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_daddl.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_fadd.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_faddl.c: Likewise.
	* sysdeps/powerpc/fpu/libm-test-ulps: Update.
	* sysdeps/mach/hurd/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2018-02-10 02:08:43 +00:00
Wilco Dijkstra
b7c83ca30e Remove slow paths from log 
Remove the slow paths from log.  Like several other double precision math
functions, log is exactly rounded.  This is not required from math functions
and causes major overheads as it requires multiple fallbacks using higher
precision arithmetic if a result is close to 0.5ULP.  Ridiculous slowdowns
of up to 100000x have been reported when the highest precision path triggers.

Interestingly removing the slow paths makes hardly any difference in practice:
the worst case error is still ~0.502ULP, and exp(log(x)) shows identical results
before/after on many millions of random cases.  All GLIBC math tests pass on
AArch64 and x64 with no change in ULP error.  A simple test over a few hundred
million values shows log is now 18% faster on average.

	* manual/probes.texi (slowlog): Delete documentation of removed probe.
	(slowlog_inexact): Likewise
	* sysdeps/ieee754/dbl-64/e_log.c (__ieee754_log): Remove slow paths.
	* sysdeps/ieee754/dbl-64/ulog.h: Remove unused declarations.
 2018-02-07 12:24:43 +00:00
Joseph Myers
6f9a3dd8b8 Move LDBL_CLASSIFY_COMPAT to its own header. 
The general rule in glibc is that it's better for a macro to be always
defined, and tested with #if, than for it to be tested with #ifdef,
because the latter is prone to typos in the macro name as well as to
the header with the macro accidentally not being included in a file
testing it.  (Testing with an "if" statement is even better, in those
cases where it's possible to do things that way, as it then means both
cases in the code get checked for syntax in glibc builds with either
value of the condition.)

math_private.h has several different groups of macros, meaning that
architectures wanting to override some of them need to define those
then include the generic version, which then defines macros if not
already defined.  It's hard to avoid that arrangement completely, but
various cases can be improved by splitting out macros or groups of
macros into separate files.

This patch splits out the LDBL_CLASSIFY_COMPAT macro into a separate
ldbl-classify-compat.h header.  This macro is tested with #ifdef; this
patch changes it to testing with #if, with a default definition to 0
in the generic header and then architecture-specific headers defining
it to 1.

Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by the patch.

	* sysdeps/generic/ldbl-classify-compat.h: New file.
	* sysdeps/arm/ldbl-classify-compat.h: Likewise.
	* sysdeps/m68k/coldfire/ldbl-classify-compat.h: Likewise.
	* sysdeps/microblaze/ldbl-classify-compat.h: Likewise.
	* sysdeps/mips/ldbl-classify-compat.h: Likewise.
	* sysdeps/nios2/ldbl-classify-compat.h: Likewise.
	* sysdeps/sh/ldbl-classify-compat.h: Likewise.
	* sysdeps/ieee754/dbl-64/s_finite.c: Include
	<ldbl-classify-compat.h>.
	[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
	* sysdeps/ieee754/dbl-64/s_isinf.c: Include
	<ldbl-classify-compat.h>.
	[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
	* sysdeps/ieee754/dbl-64/s_isnan.c: Include
	<ldbl-classify-compat.h>.
	[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_finite.c: Include
	<ldbl-classify-compat.h>.
	[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_isinf.c: Include
	<ldbl-classify-compat.h>.
	[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_isnan.c: Include
	<ldbl-classify-compat.h>.
	[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
	* sysdeps/arm/math_private.h (LDBL_CLASSIFY_COMPAT): Remove macro.
	* sysdeps/mips/math_private.h (LDBL_CLASSIFY_COMPAT): Likewise.
	* sysdeps/m68k/coldfire/math_private.h: Remove file.
	* sysdeps/microblaze/math_private.h: Likewise.
	* sysdeps/nios2/math_private.h: Likewise.
	* sysdeps/sh/math_private.h: Likewise.
 2018-02-01 21:01:00 +00:00
Carlos O'Donell
f1d7368196 Fix -Os log1p, log1pf build (bug 21314). 
As reported in bug 21314, building log1p and log1pf fails with -Os
because of a spurious -Wmaybe-uninitialized warning (reported there
for GCC 5 for MIPS, I see it also with GCC 7 for x86_64).  This patch,
based on the patches in the bug, fixes this using the DIAG_* macros.

Tested for x86_64 with -Os that this eliminates those warnings and so
allows the build to progress further.

2018-02-01  Carlos O'Donell  <carlos@redhat.com>
	    Ramin Seyed-Moussavi  <lordrasmus@gmail.com>
	    Joseph Myers  <joseph@codesourcery.com>

	[BZ #21314]
	* sysdeps/ieee754/dbl-64/s_log1p.c: Include <libc-diag.h>.
	(__log1p): Disable -Wmaybe-uninitialized for -Os around
	computation using c.
	* sysdeps/ieee754/flt-32/s_log1pf.c: Include <libc-diag.h>.
	(__log1pf): Disable -Wmaybe-uninitialized for -Os around
	computation using c.
 2018-02-01 20:40:48 +00:00
Joseph Myers
688903eb3e Update copyright dates with scripts/update-copyrights. 
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
 2018-01-01 00:32:25 +00:00
Bernd Edlinger
648615e13f Avoid signed shift overflow in pow (bug 21309). 
As noted in bug 21309, dbl-64/e_pow.c contains signed int shifts that,
although the shift count is in the range [0, 31], shift bits into and
beyond the sign bit and so are undefined in ISO C.  Although this is
defined in GNU C, this patch from the bug cleans up the code to avoid
those shifts.

Tested for x86_64.

	[BZ #21309]
	* sysdeps/ieee754/dbl-64/e_pow.c (checkint): Make m and n
	unsigned.
 2017-12-19 18:41:01 +00:00
Joseph Myers
f1e005022e Revert exp reimplementation (causes test failures). 
Revert:

	2017-12-19  Joseph Myers  <joseph@codesourcery.com>

	* sysdeps/x86_64/fpu/libm-test-ulps: Update.

	2017-12-19  Patrick McGehearty  <patrick.mcgehearty@oracle.com>

	* sysdeps/ieee754/dbl-64/e_exp.c: Include <math-svid-compat.h> and
	<errno.h>.  Include "eexp.tbl".
	(half): New constant.
	(one): Likewise.
	(__ieee754_exp): Rewrite.
	(__slowexp): Remove prototype.
	* sysdeps/ieee754/dbl-64/eexp.tbl: New file.
	* sysdeps/ieee754/dbl-64/slowexp.c: Remove file.
	* sysdeps/i386/fpu/slowexp.c: Likewise.
	* sysdeps/ia64/fpu/slowexp.c: Likewise.
	* sysdeps/m68k/m680x0/fpu/slowexp.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Likewise.
	* sysdeps/generic/math_private.h (__slowexp): Remove prototype.
	* sysdeps/ieee754/dbl-64/e_pow.c: Remove mention of slowexp.c in
	comment.
	* sysdeps/powerpc/power4/fpu/Makefile [$(subdir) = math]
	(CPPFLAGS-slowexp.c): Remove variable.
	* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
	Remove slowexp-fma, slowexp-fma4 and slowexp-avx.
	(CFLAGS-slowexp-fma.c): Remove variable.
	(CFLAGS-slowexp-fma4.c): Likewise.
	(CFLAGS-slowexp-avx.c): Likewise.
	* sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Do not
	define as macro.
	* sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Likewise.
	* sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Likewise.
	* math/Makefile (type-double-routines): Remove slowexp.
	* manual/probes.texi (slowexp_p6): Remove.
	(slowexp_p32): Likewise.
 2017-12-19 18:11:37 +00:00
Patrick McGehearty
6fd0a3c6a8 Improve __ieee754_exp() performance by greater than 5x on sparc/x86. 
These changes will be active for all platforms that don't provide
their own exp() routines. They will also be active for ieee754
versions of ccos, ccosh, cosh, csin, csinh, sinh, exp10, gamma, and
erf.

Typical performance gains is typically around 5x when measured on
Sparc s7 for common values between exp(1) and exp(40).

Using the glibc perf tests on sparc,
      sparc (nsec)    x86 (nsec)
      old     new     old     new
max   17629   395    5173     144
min     399    54      15      13
mean   5317   200    1349      23

The extreme max times for the old (ieee754) exp are due to the
multiprecision computation in the old algorithm when the true value is
very near 0.5 ulp away from an value representable in double
precision. The new algorithm does not take special measures for those
cases. The current glibc exp perf tests overrepresent those values.
Informal testing suggests approximately one in 200 cases might
invoke the high cost computation. The performance advantage of the new
algorithm for other values is still large but not as large as indicated
by the chart above.

Glibc correctness tests for exp() and expf() were run. Within the
test suite 3 input values were found to cause 1 bit differences (ulp)
when "FE_TONEAREST" rounding mode is set. No differences in exp() were
seen for the tested values for the other rounding modes.
Typical example:
exp(-0x1.760cd2p+0)  (-1.46113312244415283203125)
 new code:    2.31973271630014299393707e-01   0x1.db14cd799387ap-3
 old code:    2.31973271630014271638132e-01   0x1.db14cd7993879p-3
    exp    =  2.31973271630014285508337 (high precision)
Old delta: off by 0.49 ulp
New delta: off by 0.51 ulp

In addition, because ieee754_exp() is used by other routines, cexp()
showed test results with very small imaginary input values where the
imaginary portion of the result was off by 3 ulp when in upward
rounding mode, but not in the other rounding modes.  For x86, tgamma
showed a few values where the ulp increased to 6 (max ulp for tgamma
is 5). Sparc tgamma did not show these failures.  I presume the tgamma
differences are due to compiler optimization differences within the
gamma function.The gamma function is known to be difficult to compute
accurately.

	* sysdeps/ieee754/dbl-64/e_exp.c: Include <math-svid-compat.h> and
	<errno.h>.  Include "eexp.tbl".
	(half): New constant.
	(one): Likewise.
	(__ieee754_exp): Rewrite.
	(__slowexp): Remove prototype.
	* sysdeps/ieee754/dbl-64/eexp.tbl: New file.
	* sysdeps/ieee754/dbl-64/slowexp.c: Remove file.
	* sysdeps/i386/fpu/slowexp.c: Likewise.
	* sysdeps/ia64/fpu/slowexp.c: Likewise.
	* sysdeps/m68k/m680x0/fpu/slowexp.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Likewise.
	* sysdeps/generic/math_private.h (__slowexp): Remove prototype.
	* sysdeps/ieee754/dbl-64/e_pow.c: Remove mention of slowexp.c in
	comment.
	* sysdeps/powerpc/power4/fpu/Makefile [$(subdir) = math]
	(CPPFLAGS-slowexp.c): Remove variable.
	* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
	Remove slowexp-fma, slowexp-fma4 and slowexp-avx.
	(CFLAGS-slowexp-fma.c): Remove variable.
	(CFLAGS-slowexp-fma4.c): Likewise.
	(CFLAGS-slowexp-avx.c): Likewise.
	* sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Do not
	define as macro.
	* sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Likewise.
	* sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Likewise.
	* math/Makefile (type-double-routines): Remove slowexp.
	* manual/probes.texi (slowexp_p6): Remove.
	(slowexp_p32): Likewise.
 2017-12-19 17:27:31 +00:00
Joseph Myers
7e16a5d1d1 Use libm_alias_double for dbl-64 fma. 
This patch makes dbl-64 fma use libm_alias_double.  The ldbl-opt
version is removed.  The sparc32 version no longer needs to handle
compat symbols, while alpha needs a new wrapper to avoid getting the
ldbl-128 version (where ldbl-opt is earlier in the list of sysdeps
directories, so previously fma came from there).

Tested for x86_64, and tested with build-many-glibcs.py that installed
stripped shared libraries are unchanged by the patch.

	* sysdeps/ieee754/dbl-64/s_fma.c: Include <libm-alias-double.h>.
	(fma): Define using libm_alias_double.
	* sysdeps/ieee754/ldbl-opt/s_fma.c: Remove file.
	* sysdeps/sparc/sparc32/fpu/s_fma.c: Do not include
	<math_ldbl_opt.h>.
	(fmal): Do not define as compat symbol here.
	* sysdeps/alpha/fpu/s_fma.c: New file.
 2017-10-04 20:32:48 +00:00
Szabolcs Nagy
86c27ade1e [BZ #22244] Fix yn(n,0) without SVID wrapper 
Without SVID compat wrapper yn(n,0) and ynf(n,0) does not raise
the divide-by-zero excpetion and it may return inf with the wrong
sign for n < 0.

	[BZ #22244]
	* sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_yn): Fix x == 0 case.
	* sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_ynf): Likewise.
 2017-10-04 10:15:12 +01:00
Szabolcs Nagy
8f8f8ef7ab [BZ #22243] fix log2(0) and log(10) in downward rounding 
On 64bit targets if the SVID compat wrapper is suppressed (e.g. static linking)
then log2(0) and log10(0) returned inf instead of -inf.

	[BZ #22243]
	* sysdeps/ieee754/dbl-64/wordsize-64/e_log10.c (__ieee754_log10): Use fabs.
	* sysdeps/ieee754/dbl-64/wordsize-64/e_log2.c (__ieee754_log2): Likewise.
 2017-10-04 10:13:56 +01:00
Joseph Myers
d8f619b393 Use libm_alias_double for dbl-64 modf. 
This patch makes dbl-64 modf use libm_alias_double.  Both the dbl-64
and dbl-64/wordsize-64 versions are changed, and the ldbl-opt version
is changed to define the libc compat symbol only.  Because of
multiarch wrappers, the changed implementations are made not to define
aliases at all if __modf is defined as a macro, as with other
functions, so avoiding duplicate compat symbols while allowing those
wrappers to be simplified.

Tested for x86_64, and verified with build-many-glibcs.py that
installed stripped shared libraries are unchanged by the patch.

	* sysdeps/ieee754/dbl-64/s_modf.c: Include <libm-alias-double.h>.
	(modf): Define using libm_alias_double, only if [!__modf].
	* sysdeps/ieee754/dbl-64/wordsize-64/s_modf.c: Include
	<libm-alias-double.h>.
	(modf): Define using libm_alias_double, only if [!__modf].
	* sysdeps/ieee754/ldbl-opt/s_modf.c (modfl): Only define libc
	compat symbol here.
	* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_modf-ppc32.c
	(weak_alias): Do not undefine and redefine.
	(strong_alias): Likewise.
	* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modf-ppc64.c
	(weak_alias): Likewise.
	(strong_alias): Likewise.
 2017-10-03 23:46:23 +00:00
Joseph Myers
4699cb8b5f Use libm_alias_double for dbl-64 logb. 
This patch makes dbl-64 logb use libm_alias_double.  Both the dbl-64
and dbl-64/wordsize-64 versions are changed, and the ldbl-opt version
is removed.  Because of multiarch wrappers, the changed
implementations are made not to define aliases at all if __logb is
defined as a macro, as with other functions, so avoiding duplicate
compat symbols while allowing those wrappers to be simplified.

Tested for x86_64, and verified with build-many-glibcs.py that
installed stripped shared libraries are unchanged (except on alpha
where changes from using the wordsize-64 version are expected).

	* sysdeps/ieee754/dbl-64/s_logb.c: Include <libm-alias-double.h>.
	(logb): Define using libm_alias_double, only if [!__logb].
	* sysdeps/ieee754/dbl-64/wordsize-64/s_logb.c: Include
	<libm-alias-double.h>.
	(logb): Define using libm_alias_double, only if [!__logb].
	* sysdeps/ieee754/ldbl-opt/s_logb.c: Remove file.
	* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logb-ppc32.c
	(weak_alias): Do not undefine and redefine.
	(strong_alias): Likewise.
	* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb-ppc64.c
	(weak_alias): Likewise.
	(strong_alias): Likewise.
 2017-10-03 23:44:41 +00:00
Joseph Myers
7f1cbdf8ed Use libm_alias_float for dbl-64 fmaf. 
This patch makes the implementation of fmaf in the dbl-64 directory
use libm_alias float.

Tested for x86_64, and verified with build-many-glibcs.py that
installed stripped shared libraries are unchanged by this patch.

	* sysdeps/ieee754/dbl-64/s_fmaf.c: Include <libm-alias-float.h>.
	[!__fmaf] (fmaf): Define using libm_alias_float.
 2017-10-03 21:01:33 +00:00
Joseph Myers
39793865ec Use libm_alias_double for dbl-64 frexp. 
This patch makes dbl-64 frexp use libm_alias_double.  Both the dbl-64
and dbl-64/wordsize-64 versions are changed; the ldbl-opt version is
made to define only the libc frexpl compat symbol, now the generic
code handles the libm compat symbol automatically.

Tested for x86_64, and verified with build-many-glibcs.py that
installed stripped shared libraries are unchanged by this patch.

	* sysdeps/ieee754/dbl-64/s_frexp.c: Include <libm-alias-double.h>.
	(frexp): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_frexp.c: Include
	<libm-alias-double.h>.
	(frexp): Define using libm_alias_double.
	* sysdeps/ieee754/ldbl-opt/s_frexp.c (frexpl): Only define libc
	compat symbol here.
 2017-10-03 20:56:46 +00:00
Joseph Myers
a1132b5e56 Use libm_alias_double for more dbl-64 functions. 
This patch makes more dbl-64 functions use libm_alias_double to define
function aliases.  Specifically, it makes the change for functions
with dbl-64/wordsize-64 versions, changing both the dbl-64 and
dbl-64/wordsize-64 versions and removing the ldbl-opt wrappers.
Functions are excluded from this patch if there are complications
because of versions of those functions also present in libc, or
architecture-specific wrappers round these files.

Tested for x86_64, and with build-many-glibcs.py.  Installed stripped
shared libraries are unchanged except for alpha (where increased use
of dbl-64/wordsize-64 files, where previously ldbl-opt files that
wrapped dbl-64 files were used, was expected to result in different,
better code).

	* sysdeps/ieee754/dbl-64/s_ceil.c: Include <libm-alias-double.h>.
	(ceil): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_floor.c: Include <libm-alias-double.h>.
	(floor): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_llround.c: Include
	<libm-alias-double.h>.
	(llround): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_lround.c: Include
	<libm-alias-double.h>.
	(lround): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_nearbyint.c: Include
	<libm-alias-double.h>.
	(nearbyint): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_remquo.c: Include
	<libm-alias-double.h>.
	(remquo): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_rint.c: Include <libm-alias-double.h>.
	(rint): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_round.c: Include <libm-alias-double.h>.
	(round): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_trunc.c: Include <libm-alias-double.h>.
	(trunc): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_ceil.c: Include
	<libm-alias-double.h>.
	(ceil): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_floor.c: Include
	<libm-alias-double.h>.
	(floor): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c: Include
	<libm-alias-double.h>.
	(llround): Define using libm_alias_double.
	[_LP64] (lround): Likewise.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_lround.c: Include
	<libm-alias-double.h>.
	[!_LP64] (lround): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_nearbyint.c: Include
	<libm-alias-double.h>.
	(nearbyint): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_remquo.c: Include
	<libm-alias-double.h>.
	(remquo): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_rint.c: Include
	<libm-alias-double.h>.
	(rint): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_round.c: Include
	<libm-alias-double.h>.
	(round): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_trunc.c: Include
	<libm-alias-double.h>.
	(trunc): Define using libm_alias_double.
	* sysdeps/ieee754/ldbl-opt/s_ceil.c: Remove file.
	* sysdeps/ieee754/ldbl-opt/s_floor.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_llround.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_lround.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_nearbyint.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_remquo.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_rint.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_round.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_trunc.c: Likewise.
 2017-10-03 17:47:35 +00:00
Joseph Myers
38722448c6 Use libm_alias_double for dbl-64 atan, tan. 
This patch makes the dbl-64 atan and tan implementations use
libm_alias_double, removing the corresponding ldbl-opt wrappers.

Tested for x86_64, and with build-many-glibcs.py.  Installed stripped
shared libraries are unchanged on non-ldbl-opt platforms.  For
ldbl-opt configurations, the patch has the effect of causing
compat_symbol to define atanl and tanl in terms of __atan and __tan
instead of in terms of atan and tan, which is enough to change the
installed stripped libm.so.

	* sysdeps/ieee754/dbl-64/s_atan.c: Include <libm-alias-double.h>.
	(atan): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_tan.c: Include <libm-alias-double.h>.
	(tan): Define using libm_alias_double.
	* sysdeps/ieee754/ldbl-opt/s_atan.c: Remove file.
	* sysdeps/ieee754/ldbl-opt/s_tan.c: Likewise.
 2017-10-02 23:16:56 +00:00
Joseph Myers
527cd19c3d Make dbl-64 atan and tan into weak aliases. 
This patch converts the dbl-64 implementations of atan and tan into
weak aliases of __atan and __tan, in preparation for making them use
libm_alias_double.  Consequent changes are made to the x86_64
multiarch versions wrapping round them (with the dbl-64 functions,
like other such functions, being made not to define their aliases at
all if __atan or __tan are defined as macros by an including file).

Tested for x86_64, and with build-many-glibcs.py.

	* sysdeps/ieee754/dbl-64/s_atan.c (atan): Rename to __atan and
	define as weak alias of __atan.  Do not define any aliases if
	[__atan].
	[NO_LONG_DOUBLE] (__atanl): Define as strong alias of __atan.
	[NO_LONG_DOUBLE] (atanl): Define as weak alias of __atanl.
	* sysdeps/ieee754/dbl-64/s_tan.c (tan): Rename to __tan and define
	as weak alias of __tan.  Do not define any aliases if [__tan].
	[NO_LONG_DOUBLE] (__tanl): Define as strong alias of __tan.
	[NO_LONG_DOUBLE] (tanl): Define as weak alias of __tanl.
	* sysdeps/x86_64/fpu/multiarch/s_atan-avx.c (atan): Rename to
	__atan.
	* sysdeps/x86_64/fpu/multiarch/s_atan-fma.c (atan): Likewise.
	* sysdeps/x86_64/fpu/multiarch/s_atan-fma4.c (atan): Likewise.
	* sysdeps/x86_64/fpu/multiarch/s_atan.c (atan): Rename to __atan
	and define as weak alias of __atan.
	* sysdeps/x86_64/fpu/multiarch/s_tan-avx.c (tan): Rename to
	__atan.
	* sysdeps/x86_64/fpu/multiarch/s_tan-fma.c (tan): Likewise.
	* sysdeps/x86_64/fpu/multiarch/s_tan-fma4.c (tan): Likewise.
	* sysdeps/x86_64/fpu/multiarch/s_tan.c (tan): Rename to __tan and
	define as weak alias of __tan.
 2017-10-02 20:20:52 +00:00
Joseph Myers
1e2bffd05c Use libm_alias_double for some dbl-64 functions. 
Continuing the move of libm aliases to common macros that can create
_FloatN / _FloatNx aliases in future, this patch converts some dbl-64
functions to using libm_alias_double, thereby eliminating the need for
some ldbl-opt wrappers.

This patch deliberately limits what functions are converted so that it
can be verified by comparison of stipped binaries.  Specifically, atan
and tan are excluded because they first need converting to being weak
aliases; fma is omitted as it has additional complications with
versions in other directories (removing the ldbl-opt version can
e.g. cause the ldbl-128 version to be used instead of dbl-64); and
functions that have both dbl-64/wordsize-64 and ldbl-opt versions are
excluded because ldbl-opt currently always wraps dbl-64 function
versions, so changing those will result in platforms using both
ldbl-opt and dbl-64/wordsize-64 (i.e. alpha) starting to use the
dbl-64/wordsize-64 versions of those functions (which is good, as an
optimization, but still best separated from the present patch to get
better validation).

Tested for x86_64, and tested with build-many-glibcs.py that installed
stripped shared libraries are unchanged by the patch.

	* sysdeps/ieee754/dbl-64/s_asinh.c: Include <libm-alias-double.h>.
	(asinh): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_cbrt.c: Include <libm-alias-double.h>.
	(cbrt): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_copysign.c: Include
	<libm-alias-double.h>.
	(copysign): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_erf.c: Include <libm-alias-double.h>.
	(erf): Define using libm_alias_double.
	(erfc): Likewise.
	* sysdeps/ieee754/dbl-64/s_expm1.c: Include <libm-alias-double.h>.
	(expm1): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_fabs.c: Include <libm-alias-double.h>.
	(fabs): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_fromfp.c (fromfp): Define using
	libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_fromfp_main.c: Include
	<libm-alias-double.h>.
	* sysdeps/ieee754/dbl-64/s_fromfpx.c (fromfpx): Define using
	libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_getpayload.c: Include
	<libm-alias-double.h>.
	(getpayload): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_llrint.c: Include
	<libm-alias-double.h>.
	(llrint): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_lrint.c: Include <libm-alias-double.h>.
	(lrint): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_nextup.c: Include
	<libm-alias-double.h>.
	(nextup): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_roundeven.c: Include
	<libm-alias-double.h>.
	(roundeven): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_setpayload.c (setpayload): Define using
	libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_setpayload_main.c: Include
	<libm-alias-double.h>.
	* sysdeps/ieee754/dbl-64/s_setpayloadsig.c (setpayloadsig): Define
	using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_sin.c: Include <libm-alias-double.h>.
	(cos): Define using libm_alias_double.
	(sin): Likewise.
	* sysdeps/ieee754/dbl-64/s_sincos.c: Include
	<libm-alias-double.h>.
	(sincos): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_tanh.c: Include <libm-alias-double.h>.
	(tanh): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_totalorder.c: Include
	<libm-alias-double.h>.
	(totalorder): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_totalordermag.c: Include
	<libm-alias-double.h>.
	(totalordermag): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_ufromfp.c (ufromfp): Define using
	libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_ufromfpx.c (ufromfpx): Define using
	libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_getpayload.c: Include
	<libm-alias-double.h>.
	(getpayload): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_roundeven.c: Include
	<libm-alias-double.h>.
	(roundeven): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_setpayload_main.c: Include
	<libm-alias-double.h>.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include
	<libm-alias-double.h>.
	(totalorder): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include
	<libm-alias-double.h>.
	(totalordermag): Define using libm_alias_double.
	* sysdeps/ieee754/ldbl-opt/s_copysign.c (copysignl): Only define
	libc compat symbol here.
	* sysdeps/ieee754/ldbl-opt/s_asinh.c: Remove file.
	* sysdeps/ieee754/ldbl-opt/s_cbrt.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_erf.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_expm1.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_fabs.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_llrint.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_lrint.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_sin.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_sincos.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_tanh.c: Likewise.
 2017-09-29 23:54:33 +00:00
Wilco Dijkstra
bd8d53bb33 Use fabs(f/l) rather than __fabs 
A few math functions still use __fabs(f/l) rather than fabs, which
means they won't be inlined. Rename them so they are inlined.
Also add -fno-builtin-fabsl to nofpu powerpc makefile to work around
BZ #29253.

	* sysdeps/ieee754/dbl-64/e_lgamma_r.c
	(__ieee754_lgamma_r): Use fabs rather than __fabs.
	* sysdeps/ieee754/dbl-64/e_log10.c (__ieee754_log10): Likewise.
	* sysdeps/ieee754/dbl-64/e_log2.c (__ieee754_log2): Likewise.
	* sysdeps/ieee754/flt-32/e_lgammaf_r.c
	(__ieee754_lgammaf_r): Use fabsf rather than __fabsf.
	* sysdeps/ieee754/flt-32/e_log10f.c (__ieee754_log10f): Likewise.
	* sysdeps/ieee754/flt-32/e_log2f.c (__ieee754_log2f): Likewise.
	* sysdeps/ieee754/ldbl-128/e_lgammal_r.c
	(__ieee754_lgammal_r): Use fabsl rather than __fabsl.
	* sysdeps/ieee754/ldbl-128/e_log10l.c (__ieee754_log10l): Likewise.
	* sysdeps/ieee754/ldbl-128/e_log2l.c (__ieee754_log2l): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_lgammal_r.c
	(__ieee754_lgammal_r): Use fabsl rather than __fabsl.
	* sysdeps/ieee754/ldbl-128ibm/e_log10l.c (__ieee754_log10l): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_log2l.c (__ieee754_log2l): Likewise.
	* sysdeps/powerpc/nofpu/Makefile: Add -fno-builtin-fabsl for BZ #29253.
 2017-09-29 18:54:24 +01:00
Joseph Myers
f124cb3811 Fix nearbyint arithmetic moved before feholdexcept (bug 22225). 
In <https://sourceware.org/ml/libc-alpha/2013-05/msg00722.html> I
remarked on the possibility of arithmetic in various nearbyint
implementations being scheduled before feholdexcept calls, resulting
in spurious "inexact" exceptions.

I'm now actually observing this occurring in glibc built for ARM with
GCC 7 (in fact, both copies of the same addition/subtraction sequence
being combined and moved out before the conditionals and
feholdexcept/fesetenv pairs), resulting in test failures.

This patch makes the nearbyint implementations with this particular
feholdexcept / arithmetic / fesetenv pattern consistently use
math_opt_barrier on the function argument when first used in
arithmetic, and also consistently use math_force_eval before fesetenv
(the latter was generally already done, but the dbl-64/wordsize-64
implementation used math_opt_barrier instead, and as
math_opt_barrier's intended effect is through its output value being
used, such a use that doesn't use the return value is suspect).

Tested for x86_64 (--disable-multi-arch so more of these
implementations get used), and for ARM in a configuration where I saw
the problem scheduling.

	[BZ #22225]
	* sysdeps/ieee754/dbl-64/s_nearbyint.c (__nearbyint): Use
	math_opt_barrier on argument when doing arithmetic on it.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_nearbyint.c (__nearbyint):
	Likewise.  Use math_force_eval not math_opt_barrier after
	arithmetic.
	* sysdeps/ieee754/flt-32/s_nearbyintf.c (__nearbyintf): Use
	math_opt_barrier on argument when doing arithmetic on it.
	* sysdeps/ieee754/ldbl-128/s_nearbyintl.c (__nearbyintl):
	Likewise.
 2017-09-28 01:59:02 +00:00
Stefan Liebler
9947638d74 Fix typo in sincos32.h inclusion guard. 
This patch fixes a typo in inclusion guard in sincos32.h.

ChangeLog:

	* sysdeps/ieee754/dbl-64/sincos32.h
	[SINCCOS32_H]: Remove define.
	[SINCOS32_H]: Define.
 2017-09-25 15:56:22 +02:00
Joseph Myers
01f2881245 Make more libm functions into weak aliases. 
Many libm functions define the function as __<func> and then define
<func> as a weak alias.  This is not at all limited to cases where
there is an internal call that has namespace reasons to need to call
__<func> instead of <func>.

The common macros for creating libm function aliases work on the basis
of public function names all being aliases; that is, they define
aliases for functions using the above pattern.  Thus, where a function
just defines the public name <func> directly, changing that to be a
weak alias enables a subsequent conversion to the common macros to
retain the exact existing symbols (and so be testable by comparison of
stripped binaries).

This patch converts many existing functions to use the weak alias
pattern, as preparation for subsequent conversions to common macros.
I do expect that _FloatN/_FloatNx function aliases will end up needing
new variants of the common macros that do *not* create the original
float / double / long double name of a function - for cases where that
name is created specially to give it a particular symbol version, for
example - but for functions that can use the most common macros to
create all the public names as aliases, it makes sense for them to do
so.

Regarding the Bessel function wrappers in this patch: only float and
double wrappers are changed because the long double wrappers already
used the weak alias pattern.

Tested for x86_64, and with build-many-glibcs.py.

	* include/math.h (roundeven): Change hidden_proto call to
	__roundeven.
	* math/w_j0_compat.c (j0): Rename to __j0 and define as weak
	alias.
	[NO_LONG_DOUBLE] (__j0l): New strong alias.
	(y0): Rename to __y0 and define as weak alias.
	[NO_LONG_DOUBLE] (__y0l): New strong alias.
	* math/w_j0f_compat.c (j0f): Rename to __j0f and define as weak
	alias.
	(y0f): Rename to __y0f and define as weak alias.
	* math/w_j1_compat.c (j1): Rename to __j1 and define as weak
	alias.
	[NO_LONG_DOUBLE] (__j1l): New strong alias.
	(y1): Rename to __y1 and define as weak alias.
	[NO_LONG_DOUBLE] (__y1l): New strong alias.
	* math/w_j1f_compat.c (j1f): Rename to __j1f and define as weak
	alias.
	(y1f): Rename to __y1f and define as weak alias.
	* math/w_jn_compat.c (jn): Rename to __jn and define as weak
	alias.
	[NO_LONG_DOUBLE] (__jnl): New strong alias.
	(yn): Rename to __yn and define as weak alias.
	[NO_LONG_DOUBLE] (__ynl): New strong alias.
	* math/w_jnf_compat.c (jnf): Rename to __jnf and define as weak
	alias.
	(ynf): Rename to __ynf and define as weak alias.
	* sysdeps/ieee754/dbl-64/s_fromfp.c (FUNC): Define to __fromfp.
	(fromfp): Define as weak alias.
	[NO_LONG_DOUBLE] (__fromfpl): New strong alias.
	* sysdeps/ieee754/dbl-64/s_fromfpx.c (FUNC): Define to __fromfpx.
	(fromfpx): Define as weak alias.
	[NO_LONG_DOUBLE] (__fromfpxl): New strong alias.
	* sysdeps/ieee754/dbl-64/s_getpayload.c (getpayload): Rename to
	__getpayload and define as weak alias.
	[NO_LONG_DOUBLE] (__getpayloadl): New strong alias.
	* sysdeps/ieee754/dbl-64/s_roundeven.c (roundeven): Rename to
	__roundeven and define as weak alias.
	[NO_LONG_DOUBLE] (__roundevenl): New strong alias.
	* sysdeps/ieee754/dbl-64/s_setpayload.c (FUNC): Define to
	__setpayload.
	(setpayload): Define as weak alias.
	[NO_LONG_DOUBLE] (__setpayloadl): New strong alias.
	* sysdeps/ieee754/dbl-64/s_setpayloadsig.c (FUNC): Define to
	__setpayloadsig.
	(setpayloadsig): Define as weak alias.
	[NO_LONG_DOUBLE] (__setpayloadsigl): New strong alias.
	* sysdeps/ieee754/dbl-64/s_totalorder.c (totalorder): Rename to
	__totalorder and define as weak alias.
	[NO_LONG_DOUBLE] (__totalorderl): New strong alias.
	* sysdeps/ieee754/dbl-64/s_totalordermag.c (totalordermag): Rename
	to __totalordermag and define as weak alias.
	[NO_LONG_DOUBLE] (__totalordermagl): New strong alias.
	* sysdeps/ieee754/dbl-64/s_ufromfp.c (FUNC): Define to __ufromfp.
	(ufromfp): Define as weak alias.
	[NO_LONG_DOUBLE] (__ufromfpl): New strong alias.
	* sysdeps/ieee754/dbl-64/s_ufromfpx.c (FUNC): Define to
	__ufromfpx.
	(ufromfpx): Define as weak alias.
	[NO_LONG_DOUBLE] (__ufromfpxl): New strong alias.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_getpayload.c (getpayload):
	Rename to __getpayload and define as weak alias.
	[NO_LONG_DOUBLE] (__getpayloadl): New strong alias.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_roundeven.c (roundeven):
	Rename to __roundeven and define as weak alias.
	[NO_LONG_DOUBLE] (__roundevenl): New strong alias.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c (totalorder):
	Rename to __totalorder and define as weak alias.
	[NO_LONG_DOUBLE] (__totalorderl): New strong alias.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c
	(totalordermag): Rename to __totalordermag and define as weak
	alias.
	[NO_LONG_DOUBLE] (__totalordermagl): New strong alias.
	* sysdeps/ieee754/float128/float128_private.h (__getpayloadl): New
	macro.
	(__roundevenl): Likewise.
	(__totalorderl): Likewise.
	(__totalordermagl): Likewise
	* sysdeps/ieee754/float128/s_fromfpf128.c (FUNC): Define to
	__fromfpf128.
	(fromfpf128): Define as weak alias.
	* sysdeps/ieee754/float128/s_fromfpxf128.c (FUNC): Define to
	__fromfpxf128.
	(fromfpxf128): Define as weak alias.
	* sysdeps/ieee754/float128/s_setpayloadf128.c (FUNC): Define to
	__setpayloadf128.
	(setpayloadf128): Define as weak alias.
	* sysdeps/ieee754/float128/s_setpayloadsigf128.c (FUNC): Define to
	__setpayloadsigf128.
	(setpayloadsigf128): Define as weak alias.
	* sysdeps/ieee754/float128/s_ufromfpf128.c (FUNC): Define to
	__ufromfpf128.
	(ufromfpf128): Define as weak alias.
	* sysdeps/ieee754/float128/s_ufromfpxf128.c (FUNC): Define to
	__ufromfpxf128.
	(ufromfpxf128): Define as weak alias.
	* sysdeps/ieee754/flt-32/s_fromfpf.c (FUNC): Define to __fromfpf.
	(fromfpf): Define as weak alias.
	* sysdeps/ieee754/flt-32/s_fromfpxf.c (FUNC): Define to
	__fromfpxf.
	(fromfpxf): Define as weak alias.
	* sysdeps/ieee754/flt-32/s_getpayloadf.c (getpayloadf): Rename to
	__getpayloadf and define as weak alias.
	* sysdeps/ieee754/flt-32/s_roundevenf.c (roundevenf): Rename to
	__roundevenf and define as weak alias.
	* sysdeps/ieee754/flt-32/s_setpayloadf.c (FUNC): Define to
	__setpayloadf.
	(setpayloadf): Define as weak alias.
	* sysdeps/ieee754/flt-32/s_setpayloadsigf.c (FUNC): Define to
	__setpayloadsigf.
	(setpayloadsigf): Define as weak alias.
	* sysdeps/ieee754/flt-32/s_totalorderf.c (totalorderf): Rename to
	__totalorderf and define as weak alias.
	* sysdeps/ieee754/flt-32/s_totalordermagf.c (totalordermagf):
	Rename to __totalordermagf and define as weak alias.
	* sysdeps/ieee754/flt-32/s_ufromfpf.c (FUNC): Define to
	__ufromfpf.
	(ufromfpf): Define as weak alias.
	* sysdeps/ieee754/flt-32/s_ufromfpxf.c (FUNC): Define to
	__ufromfpxf.
	(ufromfpxf): Define as weak alias.
	* sysdeps/ieee754/ldbl-128/s_fromfpl.c (FUNC): Define to
	__fromfpl.
	(fromfpl): Define as weak alias.
	* sysdeps/ieee754/ldbl-128/s_fromfpxl.c (FUNC): Define to
	__fromfpxl.
	(fromfpxl): Define as weak alias.
	* sysdeps/ieee754/ldbl-128/s_getpayloadl.c (getpayloadl): Rename
	to __getpayloadl and define as weak alias.
	* sysdeps/ieee754/ldbl-128/s_roundevenl.c (roundevenl): Rename to
	__roundevenl and define as weak alias.
	* sysdeps/ieee754/ldbl-128/s_setpayloadl.c (FUNC): Define to
	__setpayloadl.
	(setpayloadl): Define as weak alias.
	* sysdeps/ieee754/ldbl-128/s_setpayloadsigl.c (FUNC): Define to
	__setpayloadsigl.
	(setpayloadsigl): Define as weak alias.
	* sysdeps/ieee754/ldbl-128/s_totalorderl.c (totalorderl): Rename
	to __totalorderl and define as weak alias.
	* sysdeps/ieee754/ldbl-128/s_totalordermagl.c (totalordermagl):
	Rename to __totalordermagl and define as weak alias.
	* sysdeps/ieee754/ldbl-128/s_ufromfpl.c (FUNC): Define to
	__ufromfpl.
	(ufromfpl): Define as weak alias.
	* sysdeps/ieee754/ldbl-128/s_ufromfpxl.c (FUNC): Define to
	__ufromfpxl.
	(ufromfpxl): Define as weak alias.
	* sysdeps/ieee754/ldbl-128ibm/s_fromfpl.c (FUNC): Define to
	__fromfpl.
	(fromfpl): Define as weak alias.
	* sysdeps/ieee754/ldbl-128ibm/s_fromfpxl.c (FUNC): Define to
	__fromfpxl.
	(fromfpxl): Define as weak alias.
	* sysdeps/ieee754/ldbl-128ibm/s_getpayloadl.c (getpayloadl):
	Rename to __getpayloadl and define as weak alias.
	* sysdeps/ieee754/ldbl-128ibm/s_roundevenl.c (roundevenl): Rename
	to __roundevenl and define as weak alias.  Call __roundeven
	instead of roundeven.
	* sysdeps/ieee754/ldbl-128ibm/s_setpayloadl.c (FUNC): Define to
	__setpayloadl.
	(setpayloadl): Define as weak alias.
	* sysdeps/ieee754/ldbl-128ibm/s_setpayloadsigl.c (FUNC): Define to
	__setpayloadsigl.
	(setpayloadsigl): Define as weak alias.
	* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c (totalorderl):
	Rename to __totalorderl and define as weak alias.
	* sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c (totalordermagl):
	Rename to __totalordermagl and define as weak alias.
	* sysdeps/ieee754/ldbl-128ibm/s_ufromfpl.c (FUNC): Define to
	__ufromfpl.
	(ufromfpl): Define as weak alias.
	* sysdeps/ieee754/ldbl-128ibm/s_ufromfpxl.c (FUNC): Define to
	__ufromfpxl.
	(ufromfpxl): Define as weak alias.
	* sysdeps/ieee754/ldbl-96/s_fromfpl.c (FUNC): Define to
	__fromfpl.
	(fromfpl): Define as weak alias.
	* sysdeps/ieee754/ldbl-96/s_fromfpxl.c (FUNC): Define to
	__fromfpxl.
	(fromfpxl): Define as weak alias.
	* sysdeps/ieee754/ldbl-96/s_getpayloadl.c (getpayloadl): Rename to
	__getpayloadl and define as weak alias.
	* sysdeps/ieee754/ldbl-96/s_roundevenl.c (roundevenl): Rename to
	__roundevenl and define as weak alias.
	* sysdeps/ieee754/ldbl-96/s_setpayloadl.c (FUNC): Define to
	__setpayloadl.
	(setpayloadl): Define as weak alias.
	* sysdeps/ieee754/ldbl-96/s_setpayloadsigl.c (FUNC): Define to
	__setpayloadsigl.
	(setpayloadsigl): Define as weak alias.
	* sysdeps/ieee754/ldbl-96/s_totalorderl.c (totalorderl): Rename to
	__totalorderl and define as weak alias.
	* sysdeps/ieee754/ldbl-96/s_totalordermagl.c (totalordermagl):
	Rename to __totalordermagl and define as weak alias.
	* sysdeps/ieee754/ldbl-96/s_ufromfpl.c (FUNC): Define to
	__ufromfpl.
	(ufromfpl): Define as weak alias.
	* sysdeps/ieee754/ldbl-96/s_ufromfpxl.c (FUNC): Define to
	__ufromfpxl.
	(ufromfpxl): Define as weak alias.
 2017-09-14 22:28:53 +00:00
Szabolcs Nagy
bcea7ad608 Move exp compat wrappers under math/ 
Move exp compat wrappers to math/w_exp{,f,l}_compat.c to be
consistent with other wrappers.

	* sysdeps/ieee754/dbl-64/w_exp_compat.c: Move to...
	* math/w_exp_compat.c: ... here.
	* sysdeps/ieee754/flt-32/w_expf_compat.c: Move to...
	* math/w_expf_compat.c: ... here.
	* sysdeps/ieee754/ldbl-128/w_expl_compat.c: Move to...
	* math/w_expl_compat.c: ... here.
	* sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Remove.
	* sysdeps/ieee754/ldbl-96/w_expl_compat.c: Remove.
	* sysdeps/ieee754/ldbl-opt/w_exp_compat.c: Use the new path.
	* sysdeps/ieee754/ldbl-opt/w_expl_compat.c: Likewise.
 2017-09-13 17:22:22 +01:00
Joseph Myers
4f3647e46e Prefer new libm function wrappers for !LIBM_SVID_COMPAT. 
The initial obsoletion of SVID libm error handling left the old
wrappers and __kernel_standard still being used for new ports and
static linking, just with macro definitions of _LIB_VERSION and
matherr that meant symbols with those names were never actually used
and the code for different error handling variants could be optimized
out.

This patch cleans things up further by eliminating the
__kernel_standard use for new ports and static linking.  Now, the old
wrappers no longer generate any code in the !LIBM_SVID_COMPAT case,
while the new errno-only wrappers that were added for float128 support
are now also used for float, double and long double in that case.

The changes are generally straightforward.  The w_scalb*_compat
wrappers continue to be used (scalb is obsolescent in the sense of not
being supported for float128, but is present in supported standards -
the 2001 edition of POSIX and earlier XSI versions - so remains
supported for static linking and new ports, as do the float and long
double variants that are existing GNU extensions).  Those wrappers
would only call __kernel_standard in the _LIB_VERSION == _SVID_ case.
Since we would like to be able to compile most of glibc without
optimization, relying on a static function whose only use is under an
if (0) condition being optimized away to avoid an undefined
__kernel_standard reference may not be a good idea.  Thus, the
relevant code in the scalb wrappers has LIBM_SVID_COMPAT conditionals
added to guarantee it's not built at all in the case where
__kernel_standard does not exist.

Just as i386 has its own w_sqrt_compat.c, so w_sqrt.c is also added.
ia64 gets dummy w_*.c to prevent those files being built where they
would conflict with the ia64 libm, as with its existing w_*_compat.c.

Conditions disabling code for !LIBM_SVID_COMPAT are needed in both the
math/ wrappers and in the long double wrappers in ldbl-opt (to avoid
them setting up aliases and symbol versions for undefined symbols).  I
hope that future cleanups to how libm function aliases and symbol
versioning are done will eliminate the need for most of the ldbl-opt
wrappers.

Tested for x86_64 and x86, and with build-many-glibcs.py.

	* sysdeps/generic/math-type-macros-double.h: Include
	<math-svid-compat.h>.
	(__USE_WRAPPER_TEMPLATE): Define to !LIBM_SVID_COMPAT.
	* sysdeps/generic/math-type-macros-float.h: Include
	<math-svid-compat.h>.
	(__USE_WRAPPER_TEMPLATE): Define to !LIBM_SVID_COMPAT.
	* sysdeps/generic/math-type-macros-ldouble.h: Include
	<math-svid-compat.h>.
	(__USE_WRAPPER_TEMPLATE): Define to !LIBM_SVID_COMPAT.
	* math/lgamma-compat.h (BUILD_LGAMMA): Include LIBM_SVID_COMPAT
	condition.
	* math/w_acos_compat.c: Condition contents on [LIBM_SVID_COMPAT].
	* math/w_acosf_compat.c: Likewise.
	* math/w_acosh_compat.c: Likewise.
	* math/w_acoshf_compat.c: Likewise.
	* math/w_acoshl_compat.c: Likewise.
	* math/w_acosl_compat.c: Likewise.
	* math/w_asin_compat.c: Likewise.
	* math/w_asinf_compat.c: Likewise.
	* math/w_asinl_compat.c: Likewise.
	* math/w_atan2_compat.c: Likewise.
	* math/w_atan2f_compat.c: Likewise.
	* math/w_atan2l_compat.c: Likewise.
	* math/w_atanh_compat.c: Likewise.
	* math/w_atanhf_compat.c: Likewise.
	* math/w_atanhl_compat.c: Likewise.
	* math/w_cosh_compat.c: Likewise.
	* math/w_coshf_compat.c: Likewise.
	* math/w_coshl_compat.c: Likewise.
	* math/w_exp10_compat.c: Likewise.
	* math/w_exp10f_compat.c: Likewise.
	* math/w_exp10l_compat.c: Likewise.
	* math/w_exp2_compat.c: Likewise.
	* math/w_exp2f_compat.c: Likewise.
	* math/w_exp2l_compat.c: Likewise.
	* math/w_fmod_compat.c: Likewise.
	* math/w_fmodf_compat.c: Likewise.
	* math/w_fmodl_compat.c: Likewise.
	* math/w_hypot_compat.c: Likewise.
	* math/w_hypotf_compat.c: Likewise.
	* math/w_hypotl_compat.c: Likewise.
	* math/w_j0_compat.c: Likewise.
	* math/w_j0f_compat.c: Likewise.
	* math/w_j0l_compat.c: Likewise.
	* math/w_j1_compat.c: Likewise.
	* math/w_j1f_compat.c: Likewise.
	* math/w_j1l_compat.c: Likewise.
	* math/w_jn_compat.c: Likewise.
	* math/w_jnf_compat.c: Likewise.
	* math/w_jnl_compat.c: Likewise.
	* math/w_lgamma_r_compat.c: Likewise.
	* math/w_lgammaf_r_compat.c: Likewise.
	* math/w_lgammal_r_compat.c: Likewise.
	* math/w_log10_compat.c: Likewise.
	* math/w_log10f_compat.c: Likewise.
	* math/w_log10l_compat.c: Likewise.
	* math/w_log2_compat.c: Likewise.
	* math/w_log2f_compat.c: Likewise.
	* math/w_log2l_compat.c: Likewise.
	* math/w_log_compat.c: Likewise.
	* math/w_logf_compat.c: Likewise.
	* math/w_logl_compat.c: Likewise.
	* math/w_pow_compat.c: Likewise.
	* math/w_powf_compat.c: Likewise.
	* math/w_powl_compat.c: Likewise.
	* math/w_remainder_compat.c: Likewise.
	* math/w_remainderf_compat.c: Likewise.
	* math/w_remainderl_compat.c: Likewise.
	* math/w_sinh_compat.c: Likewise.
	* math/w_sinhf_compat.c: Likewise.
	* math/w_sinhl_compat.c: Likewise.
	* math/w_sqrt_compat.c: Likewise.
	* math/w_sqrtf_compat.c: Likewise.
	* math/w_sqrtl_compat.c: Likewise.
	* math/w_tgamma_compat.c: Likewise.
	* math/w_tgammaf_compat.c: Likewise.
	* math/w_tgammal_compat.c: Likewise.
	* math/w_scalb_compat.c (sysv_scalb): Condition definition on
	[LIBM_SVID_COMPAT].
	(__scalb): Condition call to sysv_scalb on [LIBM_SVID_COMPAT].
	* math/w_scalbf_compat.c (sysv_scalbf): Condition definition on
	[LIBM_SVID_COMPAT].
	(__scalbf): Condition call to sysv_scalbf on [LIBM_SVID_COMPAT].
	* math/w_scalbl_compat.c (sysv_scalbl): Condition definition on
	[LIBM_SVID_COMPAT].
	(__scalbl): Condition call to sysv_scalbl on [LIBM_SVID_COMPAT].
	* sysdeps/i386/fpu/w_sqrt.c: New file.
	* sysdeps/ia64/fpu/w_acos.c: Likewise.
	* sysdeps/ia64/fpu/w_acosf.c: Likewise.
	* sysdeps/ia64/fpu/w_acosh.c: Likewise.
	* sysdeps/ia64/fpu/w_acoshf.c: Likewise.
	* sysdeps/ia64/fpu/w_acoshl.c: Likewise.
	* sysdeps/ia64/fpu/w_acosl.c: Likewise.
	* sysdeps/ia64/fpu/w_asin.c: Likewise.
	* sysdeps/ia64/fpu/w_asinf.c: Likewise.
	* sysdeps/ia64/fpu/w_asinl.c: Likewise.
	* sysdeps/ia64/fpu/w_atan2.c: Likewise.
	* sysdeps/ia64/fpu/w_atan2f.c: Likewise.
	* sysdeps/ia64/fpu/w_atan2l.c: Likewise.
	* sysdeps/ia64/fpu/w_atanh.c: Likewise.
	* sysdeps/ia64/fpu/w_atanhf.c: Likewise.
	* sysdeps/ia64/fpu/w_atanhl.c: Likewise.
	* sysdeps/ia64/fpu/w_cosh.c: Likewise.
	* sysdeps/ia64/fpu/w_coshf.c: Likewise.
	* sysdeps/ia64/fpu/w_coshl.c: Likewise.
	* sysdeps/ia64/fpu/w_exp.c: Likewise.
	* sysdeps/ia64/fpu/w_exp10.c: Likewise.
	* sysdeps/ia64/fpu/w_exp10f.c: Likewise.
	* sysdeps/ia64/fpu/w_exp10l.c: Likewise.
	* sysdeps/ia64/fpu/w_exp2.c: Likewise.
	* sysdeps/ia64/fpu/w_exp2f.c: Likewise.
	* sysdeps/ia64/fpu/w_exp2l.c: Likewise.
	* sysdeps/ia64/fpu/w_expf.c: Likewise.
	* sysdeps/ia64/fpu/w_expl.c: Likewise.
	* sysdeps/ia64/fpu/w_fmod.c: Likewise.
	* sysdeps/ia64/fpu/w_fmodf.c: Likewise.
	* sysdeps/ia64/fpu/w_fmodl.c: Likewise.
	* sysdeps/ia64/fpu/w_hypot.c: Likewise.
	* sysdeps/ia64/fpu/w_hypotf.c: Likewise.
	* sysdeps/ia64/fpu/w_hypotl.c: Likewise.
	* sysdeps/ia64/fpu/w_lgamma_r.c: Likewise.
	* sysdeps/ia64/fpu/w_lgammaf_r.c: Likewise.
	* sysdeps/ia64/fpu/w_lgammal_r.c: Likewise.
	* sysdeps/ia64/fpu/w_log.c: Likewise.
	* sysdeps/ia64/fpu/w_log10.c: Likewise.
	* sysdeps/ia64/fpu/w_log10f.c: Likewise.
	* sysdeps/ia64/fpu/w_log10l.c: Likewise.
	* sysdeps/ia64/fpu/w_log2.c: Likewise.
	* sysdeps/ia64/fpu/w_log2f.c: Likewise.
	* sysdeps/ia64/fpu/w_log2l.c: Likewise.
	* sysdeps/ia64/fpu/w_logf.c: Likewise.
	* sysdeps/ia64/fpu/w_logl.c: Likewise.
	* sysdeps/ia64/fpu/w_pow.c: Likewise.
	* sysdeps/ia64/fpu/w_powf.c: Likewise.
	* sysdeps/ia64/fpu/w_powl.c: Likewise.
	* sysdeps/ia64/fpu/w_remainder.c: Likewise.
	* sysdeps/ia64/fpu/w_remainderf.c: Likewise.
	* sysdeps/ia64/fpu/w_remainderl.c: Likewise.
	* sysdeps/ia64/fpu/w_sinh.c: Likewise.
	* sysdeps/ia64/fpu/w_sinhf.c: Likewise.
	* sysdeps/ia64/fpu/w_sinhl.c: Likewise.
	* sysdeps/ia64/fpu/w_sqrt.c: Likewise.
	* sysdeps/ia64/fpu/w_sqrtf.c: Likewise.
	* sysdeps/ia64/fpu/w_sqrtl.c: Likewise.
	* sysdeps/ia64/fpu/w_tgamma.c: Likewise.
	* sysdeps/ia64/fpu/w_tgammaf.c: Likewise.
	* sysdeps/ia64/fpu/w_tgammal.c: Likewise.
	* sysdeps/ieee754/dbl-64/w_exp_compat.c: Condition contents on
	[LIBM_SVID_COMPAT].
	* sysdeps/ieee754/flt-32/w_expf_compat.c: Likewise.
	* sysdeps/ieee754/k_standard.c: Likewise.
	* sysdeps/ieee754/k_standardf.c: Likewise.
	* sysdeps/ieee754/k_standardl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/w_expl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-96/w_expl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/w_expl_compat.c: Condition
	long_double_symbol call on [LIBM_SVID_COMPAT].
	* sysdeps/ieee754/ldbl-opt/w_acoshl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_acosl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_asinl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_atan2l_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_atanhl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_coshl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_fmodl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_hypotl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_j0l_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_j1l_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_jnl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_lgammal_r_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_log10l_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_log2l_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_logl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_powl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_remainderl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_sinhl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_sqrtl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_tgammal_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c: Condition
	long_double_symbol and compat_symbol calls on [LIBM_SVID_COMPAT].
 2017-09-05 23:35:55 +00:00
Szabolcs Nagy
8aa48656bb Fix CFLAGS override in sysdeps/ieee754/dbl-64 
Use += instead of = to avoid overriding target specific CFLAGS settings.
Ideally the settings in target Makefiles would have precedence, but the
Makefile inclusion order does not allow that, with this fix at least the
target settings are not dropped.
 2017-08-24 15:56:11 +01:00
Joseph Myers
813378e9fe Obsolete matherr, _LIB_VERSION, libieee.a. 
This patch obsoletes support for SVID libm error handling (the system
where a user-defined function matherr is called on a libm function
error; only enabled if you also set _LIB_VERSION = _SVID_ or
_LIB_VERSION = _XOPEN_) and the use of the _LIB_VERSION global
variable to control libm error handling.  matherr and _LIB_VERSION are
made into compat symbols, not supported for new ports or for static
linking.  The libieee.a object file (which sets _LIB_VERSION = _IEEE_,
so disabling errno setting for some functions) is also removed, and
all the related definitions are removed from math.h.

The manual already recommends against using matherr, and it's already
not supported for _Float128 functions (those use new wrappers that
don't support matherr, only errno) - this patch means that it becomes
possible to e.g. add sinf32 as an alias to sinf without that resulting
in undesired matherr support in sinf32 for existing glibc ports.
matherr support is not part of any standard supported by glibc (it was
removed in XPG4).

Because matherr is a function to be defined by the user, of course
user programs defining such a function will still continue to link; it
just quietly won't be used.  If they try to write to the library's
copy of _LIB_VERSION to enable SVID error handling, however, they will
get a link error (but if they define their own _LIB_VERSION variable,
they won't).

I expect the most likely case of build failures from this patch to be
programs with unconditional cargo-culted uses of -lieee (based on a
notion of "I want IEEE floating point", not any actual requirement for
that library).

Ideally, the new-port-or-static-linking case would use the new
wrappers used for _Float128.  This is not implemented in this patch,
because of the complication of architecture-specific (powerpc32 and
sparc) sqrt wrappers that use _LIB_VERSION and __kernel_standard
directly.  Thus, the old wrappers and __kernel_standard are still
built unconditionally, and _LIB_VERSION still exists in static libm.
But when the old wrappers and __kernel_standard are built in the
non-compat case, _LIB_VERSION and matherr are defined as macros so
code to support those features isn't actually built into static libm
or new ports' shared libm after this patch.

I intend to move to the new wrappers for static libm and new ports in
followup patches.  I believe the sqrt wrappers for powerpc32 and sparc
can reasonably be removed.  GCC already optimizes the normal case of
sqrt by generating code that uses a hardware instruction and only
calls the sqrt function if the argument was negative (if
-fno-math-errno, of course, it just uses the hardware instruction
without any check for negative argument being needed).  Thus those
wrappers will only actually get called in the case of negative
arguments, which is not a case it makes sense to optimize for.  But
even without removing the powerpc32 and sparc wrappers it should still
be possible to move to the new wrappers for static libm and new ports,
just without having those dubious architecture-specific optimizations
in static libm.

Everything said about matherr equally applies to matherrf and matherrl
(IA64-specific, undocumented), except that the structure of IA64 libm
means it won't be converted to using the new wrappers (it doesn't use
the old ones either, but its own error-handling code instead).

As with other tests of compat symbols, I expect test-matherr and
test-matherr-2 to need to become appropriately conditional once we
have a system for disabling such tests for ports too new to have the
relevant symbols.

Tested for x86_64 and x86, and with build-many-glibcs.py.

	* math/math.h [__USE_MISC] (_LIB_VERSION_TYPE): Remove.
	[__USE_MISC] (_LIB_VERSION): Likewise.
	[__USE_MISC] (struct exception): Likewise.
	[__USE_MISC] (matherr): Likewise.
	[__USE_MISC] (DOMAIN): Likewise.
	[__USE_MISC] (SING): Likewise.
	[__USE_MISC] (OVERFLOW): Likewise.
	[__USE_MISC] (UNDERFLOW): Likewise.
	[__USE_MISC] (TLOSS): Likewise.
	[__USE_MISC] (PLOSS): Likewise.
	[__USE_MISC] (HUGE): Likewise.
	[__USE_XOPEN] (MAXFLOAT): Define even if [__USE_MISC].
	* math/math-svid-compat.h: New file.
	* conform/linknamespace.pl (@whitelist): Remove matherr, matherrf
	and matherrl.
	* include/math.h [!_ISOMAC] (__matherr): Remove.
	* manual/arith.texi (FP Exceptions): Do not document matherr.
	* math/Makefile (tests): Change test-matherr to test-matherr-3.
	(tests-internal): New variable.
	(install-lib): Do not add libieee.a.
	(non-lib.a): Likewise.
	(extra-objs): Do not add libieee.a and ieee-math.o.
	(CPPFLAGS-s_lib_version.c): Remove variable.
	($(objpfx)libieee.a): Remove rule.
	($(addprefix $(objpfx), $(tests-internal)): Depend on $(libm).
	* math/ieee-math.c: Remove.
	* math/libm-test-support.c (matherr): Remove.
	* math/test-matherr.c: Use <support/test-driver.c>.  Add copyright
	and license notices.  Include <math-svid-compat.h> and
	<shlib-compat.h>.
	(matherr): Undefine as macro.  Use compat_symbol_reference.
	(_LIB_VERSION): Likewise.
	* math/test-matherr-2.c: New file.
	* math/test-matherr-3.c: Likewise.
	* sysdeps/generic/math_private.h (__kernel_standard): Remove
	declaration.
	(__kernel_standard_f): Likewise.
	(__kernel_standard_l): Likewise.
	* sysdeps/ieee754/s_lib_version.c: Do not include <math.h> or
	<math_private.h>.  Include <math-svid-compat.h>.
	(_LIB_VERSION): Undefine as macro.
	(_LIB_VERSION_INTERNAL): Always initialize to _POSIX_.  Define
	only if [LIBM_SVID_COMPAT || !defined SHARED].  If
	[LIBM_SVID_COMPAT], use compat_symbol.
	* sysdeps/ieee754/s_matherr.c: Do not include <math.h> or
	<math_private.h>.  Include <math-svid-compat.h>.
	(matherr): Undefine as macro.
	(__matherr): Define only if [LIBM_SVID_COMPAT].  Use
	compat_symbol.
	* sysdeps/ia64/fpu/libm_error.c: Include <math-svid-compat.h>.
	[_LIBC && LIBM_SVID_COMPAT] (matherrf): Use
	compat_symbol_reference.
	[_LIBC && LIBM_SVID_COMPAT] (matherrl): Likewise.
	[_LIBC && !LIBM_SVID_COMPAT] (matherrf): Define as macro.
	[_LIBC && !LIBM_SVID_COMPAT] (matherrl): Likewise.
	* sysdeps/ia64/fpu/libm_support.h: Include <math-svid-compat.h>.
	(MATHERR_D): Remove declaration.
	[!_LIBC] (_LIB_VERSION_TYPE): Likewise
	[!LIBM_BUILD] (_LIB_VERSIONIMF): Likewise.
	[LIBM_BUILD] (pmatherrf): Likewise.
	[LIBM_BUILD] (pmatherr): Likewise.
	[LIBM_BUILD] (pmatherrl): Likewise.
	(DOMAIN): Likewise.
	(SING): Likewise.
	(OVERFLOW): Likewise.
	(UNDERFLOW): Likewise.
	(TLOSS): Likewise.
	(PLOSS): Likewise.
	* sysdeps/ia64/fpu/s_matherrf.c: Include <math-svid-compat.h>.
	(__matherrf): Define only if [LIBM_SVID_COMPAT].  Use
	compat_symbol.
	* sysdeps/ia64/fpu/s_matherrl.c: Include <math-svid-compat.h>.
	(__matherrl): Define only if [LIBM_SVID_COMPAT].  Use
	compat_symbol.
	* math/lgamma-compat.h: Include <math-svid-compat.h>.
	* math/w_acos_compat.c: Likewise.
	* math/w_acosf_compat.c: Likewise.
	* math/w_acosh_compat.c: Likewise.
	* math/w_acoshf_compat.c: Likewise.
	* math/w_acoshl_compat.c: Likewise.
	* math/w_acosl_compat.c: Likewise.
	* math/w_asin_compat.c: Likewise.
	* math/w_asinf_compat.c: Likewise.
	* math/w_asinl_compat.c: Likewise.
	* math/w_atan2_compat.c: Likewise.
	* math/w_atan2f_compat.c: Likewise.
	* math/w_atan2l_compat.c: Likewise.
	* math/w_atanh_compat.c: Likewise.
	* math/w_atanhf_compat.c: Likewise.
	* math/w_atanhl_compat.c: Likewise.
	* math/w_cosh_compat.c: Likewise.
	* math/w_coshf_compat.c: Likewise.
	* math/w_coshl_compat.c: Likewise.
	* math/w_exp10_compat.c: Likewise.
	* math/w_exp10f_compat.c: Likewise.
	* math/w_exp10l_compat.c: Likewise.
	* math/w_exp2_compat.c: Likewise.
	* math/w_exp2f_compat.c: Likewise.
	* math/w_exp2l_compat.c: Likewise.
	* math/w_fmod_compat.c: Likewise.
	* math/w_fmodf_compat.c: Likewise.
	* math/w_fmodl_compat.c: Likewise.
	* math/w_hypot_compat.c: Likewise.
	* math/w_hypotf_compat.c: Likewise.
	* math/w_hypotl_compat.c: Likewise.
	* math/w_j0_compat.c: Likewise.
	* math/w_j0f_compat.c: Likewise.
	* math/w_j0l_compat.c: Likewise.
	* math/w_j1_compat.c: Likewise.
	* math/w_j1f_compat.c: Likewise.
	* math/w_j1l_compat.c: Likewise.
	* math/w_jn_compat.c: Likewise.
	* math/w_jnf_compat.c: Likewise.
	* math/w_jnl_compat.c: Likewise.
	* math/w_lgamma_main.c: Likewise.
	* math/w_lgamma_r_compat.c: Likewise.
	* math/w_lgammaf_main.c: Likewise.
	* math/w_lgammaf_r_compat.c: Likewise.
	* math/w_lgammal_main.c: Likewise.
	* math/w_lgammal_r_compat.c: Likewise.
	* math/w_log10_compat.c: Likewise.
	* math/w_log10f_compat.c: Likewise.
	* math/w_log10l_compat.c: Likewise.
	* math/w_log2_compat.c: Likewise.
	* math/w_log2f_compat.c: Likewise.
	* math/w_log2l_compat.c: Likewise.
	* math/w_log_compat.c: Likewise.
	* math/w_logf_compat.c: Likewise.
	* math/w_logl_compat.c: Likewise.
	* math/w_pow_compat.c: Likewise.
	* math/w_powf_compat.c: Likewise.
	* math/w_powl_compat.c: Likewise.
	* math/w_remainder_compat.c: Likewise.
	* math/w_remainderf_compat.c: Likewise.
	* math/w_remainderl_compat.c: Likewise.
	* math/w_scalb_compat.c: Likewise.
	* math/w_scalbf_compat.c: Likewise.
	* math/w_scalbl_compat.c: Likewise.
	* math/w_sinh_compat.c: Likewise.
	* math/w_sinhf_compat.c: Likewise.
	* math/w_sinhl_compat.c: Likewise.
	* math/w_sqrt_compat.c: Likewise.
	* math/w_sqrtf_compat.c: Likewise.
	* math/w_sqrtl_compat.c: Likewise.
	* math/w_tgamma_compat.c: Likewise.
	* math/w_tgammaf_compat.c: Likewise.
	* math/w_tgammal_compat.c: Likewise.
	* sysdeps/ieee754/dbl-64/w_exp_compat.c: Likewise.
	* sysdeps/ieee754/flt-32/w_expf_compat.c: Likewise.
	* sysdeps/ieee754/k_standard.c: Likewise.
	* sysdeps/ieee754/k_standardf.c: Likewise.
	* sysdeps/ieee754/k_standardl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/w_expl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-96/w_expl_compat.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/fpu/w_sqrt_compat.S: Likewise.
	* sysdeps/powerpc/powerpc32/power4/fpu/w_sqrtf_compat.S: Likewise.
	* sysdeps/powerpc/powerpc32/power5/fpu/w_sqrt_compat.S: Likewise.
	* sysdeps/powerpc/powerpc32/power5/fpu/w_sqrtf_compat.S: Likewise.
	* sysdeps/sparc/sparc32/fpu/w_sqrt_compat.S: Likewise.
	* sysdeps/sparc/sparc32/fpu/w_sqrtf_compat.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt_compat-vis3.S:
	Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf_compat-vis3.S:
	Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrt_compat.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrtf_compat.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/w_sqrt_compat.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/w_sqrtf_compat.S: Likewise.
 2017-08-21 17:45:10 +00:00
Joseph Myers
24ab7723b8 Consistently use uintN_t not u_intN_t in libm. 
This patch changes libm code to make consistent use of C99 uintN_t
types instead of sometimes using those and sometimes using the older
nonstandard u_intN_t names.  This makes sense as a cleanup in its own
right, and also facilitates merges to GCC's libquadmath (which gets
the types from stdint.h and so may not have u_intN_t available at
all).

Tested for x86_64, and with build-many-glibcs.py.

	* math/s_nextafter.c (__nextafter): Use uintN_t instead of
	u_intN_t.
	* math/s_nexttowardf.c (__nexttowardf): Likewise.
	* sysdeps/generic/math_private.h (ieee_double_shape_type):
	Likewise.
	(ieee_float_shape_type): Likewise.
	* sysdeps/i386/fpu/s_fpclassifyl.c (__fpclassifyl): Likewise.
	* sysdeps/i386/fpu/s_isnanl.c (__isnanl): Likewise.
	* sysdeps/i386/fpu/s_nextafterl.c (__nextafterl): Likewise.
	* sysdeps/i386/fpu/s_nexttoward.c (__nexttoward): Likewise.
	* sysdeps/i386/fpu/s_nexttowardf.c (__nexttowardf): Likewise.
	* sysdeps/ieee754/dbl-64/e_acosh.c (__ieee754_acosh): Likewise.
	* sysdeps/ieee754/dbl-64/e_cosh.c (__ieee754_cosh): Likewise.
	* sysdeps/ieee754/dbl-64/e_fmod.c (__ieee754_fmod): Likewise.
	* sysdeps/ieee754/dbl-64/e_gamma_r.c (__ieee754_gamma_r):
	Likewise.
	* sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Likewise.
	* sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise.
	(__ieee754_yn): Likewise.
	* sysdeps/ieee754/dbl-64/e_log10.c (__ieee754_log10): Likewise.
	* sysdeps/ieee754/dbl-64/e_log2.c (__ieee754_log2): Likewise.
	* sysdeps/ieee754/dbl-64/e_rem_pio2.c (__ieee754_rem_pio2):
	Likewise.
	* sysdeps/ieee754/dbl-64/e_sinh.c (__ieee754_sinh): Likewise.
	* sysdeps/ieee754/dbl-64/s_ceil.c (__ceil): Likewise.
	* sysdeps/ieee754/dbl-64/s_copysign.c (__copysign): Likewise.
	* sysdeps/ieee754/dbl-64/s_erf.c (__erf): Likewise.
	(__erfc): Likewise.
	* sysdeps/ieee754/dbl-64/s_expm1.c (__expm1): Likewise.
	* sysdeps/ieee754/dbl-64/s_finite.c (FINITE): Likewise.
	* sysdeps/ieee754/dbl-64/s_floor.c (__floor): Likewise.
	* sysdeps/ieee754/dbl-64/s_fpclassify.c (__fpclassify): Likewise.
	* sysdeps/ieee754/dbl-64/s_isnan.c (__isnan): Likewise.
	* sysdeps/ieee754/dbl-64/s_issignaling.c (__issignaling):
	Likewise.
	* sysdeps/ieee754/dbl-64/s_llrint.c (__llrint): Likewise.
	* sysdeps/ieee754/dbl-64/s_llround.c (__llround): Likewise.
	* sysdeps/ieee754/dbl-64/s_lrint.c (__lrint): Likewise.
	* sysdeps/ieee754/dbl-64/s_lround.c (__lround): Likewise.
	* sysdeps/ieee754/dbl-64/s_modf.c (__modf): Likewise.
	* sysdeps/ieee754/dbl-64/s_nextup.c (__nextup): Likewise.
	* sysdeps/ieee754/dbl-64/s_remquo.c (__remquo): Likewise.
	* sysdeps/ieee754/dbl-64/s_round.c (__round): Likewise.
	* sysdeps/ieee754/dbl-64/s_trunc.c (__trunc): Likewise.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_issignaling.c
	(__issignaling): Likewise.
	* sysdeps/ieee754/flt-32/e_atan2f.c (__ieee754_atan2f): Likewise.
	* sysdeps/ieee754/flt-32/e_fmodf.c (__ieee754_fmodf): Likewise.
	* sysdeps/ieee754/flt-32/e_gammaf_r.c (__ieee754_gammaf_r):
	Likewise.
	* sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_ynf): Likewise.
	* sysdeps/ieee754/flt-32/e_log10f.c (__ieee754_log10f): Likewise.
	* sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Likewise.
	* sysdeps/ieee754/flt-32/e_rem_pio2f.c (__ieee754_rem_pio2f):
	Likewise.
	* sysdeps/ieee754/flt-32/e_remainderf.c (__ieee754_remainderf):
	Likewise.
	* sysdeps/ieee754/flt-32/e_sqrtf.c (__ieee754_sqrtf): Likewise.
	* sysdeps/ieee754/flt-32/s_ceilf.c (__ceilf): Likewise.
	* sysdeps/ieee754/flt-32/s_copysignf.c (__copysignf): Likewise.
	* sysdeps/ieee754/flt-32/s_erff.c (__erff): Likewise.
	(__erfcf): Likewise.
	* sysdeps/ieee754/flt-32/s_expm1f.c (__expm1f): Likewise.
	* sysdeps/ieee754/flt-32/s_finitef.c (FINITEF): Likewise.
	* sysdeps/ieee754/flt-32/s_floorf.c (__floorf): Likewise.
	* sysdeps/ieee754/flt-32/s_fpclassifyf.c (__fpclassifyf):
	Likewise.
	* sysdeps/ieee754/flt-32/s_isnanf.c (__isnanf): Likewise.
	* sysdeps/ieee754/flt-32/s_issignalingf.c (__issignalingf):
	Likewise.
	* sysdeps/ieee754/flt-32/s_llrintf.c (__llrintf): Likewise.
	* sysdeps/ieee754/flt-32/s_llroundf.c (__llroundf): Likewise.
	* sysdeps/ieee754/flt-32/s_lrintf.c (__lrintf): Likewise.
	* sysdeps/ieee754/flt-32/s_lroundf.c (__lroundf): Likewise.
	* sysdeps/ieee754/flt-32/s_modff.c (__modff): Likewise.
	* sysdeps/ieee754/flt-32/s_remquof.c (__remquof): Likewise.
	* sysdeps/ieee754/flt-32/s_roundf.c (__roundf): Likewise.
	* sysdeps/ieee754/ldbl-128/e_acoshl.c (__ieee754_acoshl):
	Likewise.
	* sysdeps/ieee754/ldbl-128/e_atan2l.c (__ieee754_atan2l):
	Likewise.
	* sysdeps/ieee754/ldbl-128/e_atanhl.c (__ieee754_atanhl):
	Likewise.
	* sysdeps/ieee754/ldbl-128/e_fmodl.c (__ieee754_fmodl): Likewise.
	* sysdeps/ieee754/ldbl-128/e_gammal_r.c (__ieee754_gammal_r):
	Likewise.
	* sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl):
	Likewise.
	* sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise.
	(__ieee754_ynl): Likewise.
	* sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise.
	* sysdeps/ieee754/ldbl-128/e_rem_pio2l.c (__ieee754_rem_pio2l):
	Likewise.
	* sysdeps/ieee754/ldbl-128/e_remainderl.c (__ieee754_remainderl):
	Likewise.
	* sysdeps/ieee754/ldbl-128/e_sinhl.c (__ieee754_sinhl): Likewise.
	* sysdeps/ieee754/ldbl-128/k_cosl.c (__kernel_cosl): Likewise.
	* sysdeps/ieee754/ldbl-128/k_sincosl.c (__kernel_sincosl):
	Likewise.
	* sysdeps/ieee754/ldbl-128/k_sinl.c (__kernel_sinl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_ceill.c (__ceill): Likewise.
	* sysdeps/ieee754/ldbl-128/s_copysignl.c (__copysignl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_erfl.c (__erfcl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_fabsl.c (__fabsl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_finitel.c (__finitel): Likewise.
	* sysdeps/ieee754/ldbl-128/s_floorl.c (__floorl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_fpclassifyl.c (__fpclassifyl):
	Likewise.
	* sysdeps/ieee754/ldbl-128/s_frexpl.c (__frexpl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_isnanl.c (__isnanl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_issignalingl.c (__issignalingl):
	Likewise.
	* sysdeps/ieee754/ldbl-128/s_llrintl.c (__llrintl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_llroundl.c (__llroundl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_lroundl.c (__lroundl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_modfl.c (__modfl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_nearbyintl.c (__nearbyintl):
	Likewise.
	* sysdeps/ieee754/ldbl-128/s_nextafterl.c (__nextafterl):
	Likewise.
	* sysdeps/ieee754/ldbl-128/s_nexttoward.c (__nexttoward):
	Likewise.
	* sysdeps/ieee754/ldbl-128/s_nexttowardf.c (__nexttowardf):
	Likewise.
	* sysdeps/ieee754/ldbl-128/s_nextupl.c (__nextupl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_remquol.c (__remquol): Likewise.
	* sysdeps/ieee754/ldbl-128/s_rintl.c (__rintl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_roundl.c (__roundl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_tanhl.c (__tanhl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_truncl.c (__truncl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_fmodl.c (__ieee754_fmodl):
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (__ieee754_gammal_r):
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_rem_pio2l.c (__ieee754_rem_pio2l):
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_remainderl.c
	(__ieee754_remainderl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/k_cosl.c (__kernel_cosl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/k_sinl.c (__kernel_sinl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_fabsl.c (__fabsl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_fpclassifyl.c (___fpclassifyl):
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_modfl.c (__modfl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c (__nexttowardf):
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_remquol.c (__remquol): Likewise.
	* sysdeps/ieee754/ldbl-96/e_acoshl.c (__ieee754_acoshl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_asinl.c (__ieee754_asinl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_atanhl.c (__ieee754_atanhl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_coshl.c (__ieee754_coshl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_gammal_r.c (__ieee754_gammal_r):
	Likewise.
	* sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_j0l.c (__ieee754_j0l): Likewise.
	(__ieee754_y0l): Likewise.
	(pzero): Likewise.
	(qzero): Likewise.
	* sysdeps/ieee754/ldbl-96/e_j1l.c (__ieee754_j1l): Likewise.
	(__ieee754_y1l): Likewise.
	(pone): Likewise.
	(qone): Likewise.
	* sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise.
	(__ieee754_ynl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_lgammal_r.c (sin_pi): Likewise.
	(__ieee754_lgammal_r): Likewise.
	* sysdeps/ieee754/ldbl-96/e_rem_pio2l.c (__ieee754_rem_pio2l):
	Likewise.
	* sysdeps/ieee754/ldbl-96/e_sinhl.c (__ieee754_sinhl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_copysignl.c (__copysignl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_erfl.c (__erfl): Likewise.
	(__erfcl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_frexpl.c (__frexpl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_issignalingl.c (__issignalingl):
	Likewise.
	* sysdeps/ieee754/ldbl-96/s_llrintl.c (__llrintl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_llroundl.c (__llroundl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_lrintl.c (__lrintl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_lroundl.c (__lroundl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_modfl.c (__modfl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_nexttoward.c (__nexttoward): Likewise.
	* sysdeps/ieee754/ldbl-96/s_nexttowardf.c (__nexttowardf):
	Likewise.
	* sysdeps/ieee754/ldbl-96/s_nextupl.c (__nextupl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_remquol.c (__remquol): Likewise.
	* sysdeps/ieee754/ldbl-96/s_roundl.c (__roundl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_tanhl.c (__tanhl): Likewise.
	* sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c (__nldbl_nexttowardf):
	Likewise.
	* sysdeps/m68k/m680x0/fpu/e_pow.c (s(__ieee754_pow)): Likewise.
	* sysdeps/m68k/m680x0/fpu/s_fpclassifyl.c (__fpclassifyl):
	Likewise.
	* sysdeps/m68k/m680x0/fpu/s_llrint.c (__llrint): Likewise.
	* sysdeps/m68k/m680x0/fpu/s_llrintf.c (__llrintf): Likewise.
	* sysdeps/m68k/m680x0/fpu/s_llrintl.c (__llrintl): Likewise.
	* sysdeps/m68k/m680x0/fpu/s_nextafterl.c (__nextafterl): Likewise.
	* sysdeps/x86/fpu/powl_helper.c (__powl_helper): Likewise.
 2017-08-03 19:55:04 +00:00
Zack Weinberg
9090848d06 Narrowing the visibility of libc-internal.h even further. 
posix/wordexp-test.c used libc-internal.h for PTR_ALIGN_DOWN; similar
to what was done with libc-diag.h, I have split the definitions of
cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and PTR_ALIGN_DOWN
to a new header, libc-pointer-arith.h.

It then occurred to me that the remaining declarations in libc-internal.h
are mostly to do with early initialization, and probably most of the
files including it, even in the core code, don't need it anymore.  Indeed,
only 19 files actually need what remains of libc-internal.h.  23 others
need libc-diag.h instead, and 12 need libc-pointer-arith.h instead.
No file needs more than one of them, and 16 don't need any of them!

So, with this patch, libc-internal.h stops including libc-diag.h as
well as losing the pointer arithmetic macros, and all including files
are adjusted.

        * include/libc-pointer-arith.h: New file.  Define
	cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and
        PTR_ALIGN_DOWN here.
        * include/libc-internal.h: Definitions of above macros
	moved from here.  Don't include libc-diag.h anymore either.
	* posix/wordexp-test.c: Include stdint.h and libc-pointer-arith.h.
        Don't include libc-internal.h.

	* debug/pcprofile.c, elf/dl-tunables.c, elf/soinit.c, io/openat.c
	* io/openat64.c, misc/ptrace.c, nptl/pthread_clock_gettime.c
	* nptl/pthread_clock_settime.c, nptl/pthread_cond_common.c
	* string/strcoll_l.c, sysdeps/nacl/brk.c
	* sysdeps/unix/clock_settime.c
	* sysdeps/unix/sysv/linux/i386/get_clockfreq.c
	* sysdeps/unix/sysv/linux/ia64/get_clockfreq.c
	* sysdeps/unix/sysv/linux/powerpc/get_clockfreq.c
	* sysdeps/unix/sysv/linux/sparc/sparc64/get_clockfreq.c:
	Don't include libc-internal.h.

	* elf/get-dynamic-info.h, iconv/loop.c
	* iconvdata/iso-2022-cn-ext.c, locale/weight.h, locale/weightwc.h
	* misc/reboot.c, nis/nis_table.c, nptl_db/thread_dbP.h
	* nscd/connections.c, resolv/res_send.c, soft-fp/fmadf4.c
	* soft-fp/fmasf4.c, soft-fp/fmatf4.c, stdio-common/vfscanf.c
	* sysdeps/ieee754/dbl-64/e_lgamma_r.c
	* sysdeps/ieee754/dbl-64/k_rem_pio2.c
	* sysdeps/ieee754/flt-32/e_lgammaf_r.c
	* sysdeps/ieee754/flt-32/k_rem_pio2f.c
	* sysdeps/ieee754/ldbl-128/k_tanl.c
	* sysdeps/ieee754/ldbl-128ibm/k_tanl.c
	* sysdeps/ieee754/ldbl-96/e_lgammal_r.c
	* sysdeps/ieee754/ldbl-96/k_tanl.c, sysdeps/nptl/futex-internal.h:
	Include libc-diag.h instead of libc-internal.h.

        * elf/dl-load.c, elf/dl-reloc.c, locale/programs/locarchive.c
        * nptl/nptl-init.c, string/strcspn.c, string/strspn.c
	* malloc/malloc.c, sysdeps/i386/nptl/tls.h
	* sysdeps/nacl/dl-map-segments.h, sysdeps/x86_64/atomic-machine.h
	* sysdeps/unix/sysv/linux/spawni.c
        * sysdeps/x86_64/nptl/tls.h:
        Include libc-pointer-arith.h instead of libc-internal.h.

	* elf/get-dynamic-info.h, sysdeps/nacl/dl-map-segments.h
	* sysdeps/x86_64/atomic-machine.h:
        Add multiple include guard.
 2017-03-01 20:33:46 -05:00
Tulio Magno Quites Machado Filho
51b34a9c47 Fix lgamma*, log10* and log2* results [BZ #21171] 
lgamma(-x) should return +Inf and raise divide-by-zero.
log10(+-0) and log2(+-0) should return -Inf and raise divide-by-zero.

Tested on powerpc, powerpc64, powerpc64le and x86_64.

	[BZ #21171]
	* sysdeps/ieee754/dbl-64/e_lgamma_r.c (__ieee754_lgamma_r): Return
	+Inf and raise divide-by-zero when x is negative.
	* sysdeps/ieee754/flt-32/e_lgammaf_r.c (__ieee754_lgammaf_r): Likewise.
	* sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r): Likewise.

	* sysdeps/ieee754/dbl-64/e_log10.c (__ieee754_log10):  Return
	-Inf and raise divide-by-zero when x = +-0.
	* sysdeps/ieee754/dbl-64/e_log2.c (__ieee754_log2): Likewise.
	* sysdeps/ieee754/flt-32/e_log10f.c (__ieee754_log10f):	Likewise.
	* sysdeps/ieee754/flt-32/e_log2f.c (__ieee754_log2f): Likewise.
	* sysdeps/ieee754/ldbl-128/e_log10l.c (__ieee754_log10l): Likewise.
	* sysdeps/ieee754/ldbl-128/e_log2l.c (__ieee754_log2l): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_log10l.c (__ieee754_log10l): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_log2l.c (__ieee754_log2l): Likewise.
 2017-02-17 09:07:57 -02:00
Gabriel F. T. Gomes
4918e5f4cd Fix y0 and y1 exception handling for zero input [BZ #21134] 
The Bessel functions of the second type (Yn) should raise the "divide
by zero" exception when input is zero (both positive and negative).
Current code gives the right output, but fails to set the exception.
This error is exposed for float, double, and long double when linking
with -lieee.  Without this flag, the error is not exposed, because the
wrappers for these functions, which use __kernel_standard
functionality, set the exception as expected.

Tested for powerpc64le.

	[BZ #21134]
	* sysdeps/ieee754/dbl-64/e_j0.c (__ieee754_y0): Raise the
	"divide by zero" exception when the input is zero.
	* sysdeps/ieee754/dbl-64/e_j1.c (__ieee754_y1): Likewise.
	* sysdeps/ieee754/flt-32/e_j0f.c (__ieee754_y0f): Likewise.
	* sysdeps/ieee754/flt-32/e_j1f.c (__ieee754_y1f): Likewise.
	* sysdeps/ieee754/ldbl-128/e_j0l.c (__ieee754_y0l): Likewise.
	* sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_y1l): Likewise.
 2017-02-15 10:30:59 -02:00
Gabriel F. T. Gomes
5ab621c347 Move w_exp to libm-compat-call-auto 
This patch adds the "_compat" suffix to the wrappers of the function
exp, which use _LIB_VERSION / matherr / __kernel_standard
functionality.

Tested for powerpc64le, s390, and x86_64.

	* math/Makefile (libm-calls): Move w_exp...
	(libm-compat-calls-auto): Here.

	* math/w_expl.c: Add suffix "_compat" to filename.
	* sysdeps/ia64/fpu/w_expl.c: Likewise.
	* sysdeps/ia64/fpu/w_expf.c: Likewise.
	* sysdeps/ia64/fpu/w_exp.c: Likewise.
	* sysdeps/ieee754/dbl-64/w_exp.c: Likewise.
	* sysdeps/ieee754/flt-32/w_expf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/w_expl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/w_expl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/w_expl.c: Likewise.

	* math/w_expl_compat.c: New file, copied from above.
	* sysdeps/ia64/fpu/w_exp_compat.c: Likewise.
	* sysdeps/ia64/fpu/w_expf_compat.c: Likewise.
	* sysdeps/ia64/fpu/w_expl_compat.c: Likewise.
	* sysdeps/ieee754/dbl-64/w_exp_compat.c: Likewise.
	* sysdeps/ieee754/flt-32/w_expf_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-128/w_expl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-96/w_expl_compat.c: Likewise.

	* sysdeps/ieee754/ldbl-64-128/w_expl.c: Add suffix "_compat"
	to filename.
	* sysdeps/ieee754/ldbl-opt/w_exp.c: Likewise.

	* sysdeps/ieee754/ldbl-64-128/w_expl_compat.c: New file,
	copied from above and adjusted for the new filenames.
	* sysdeps/ieee754/ldbl-opt/w_exp_compat.c: Likewise.
 2017-02-08 17:44:20 -02:00
Joseph Myers
bfff8b1bec Update copyright dates with scripts/update-copyrights. 2017-01-01 00:14:16 +00:00
Joseph Myers
423c2b9d08 Add fromfp functions. 
TS 18661-1 defines fromfp functions (fromfp, fromfpx, ufromfp,
ufromfpx, and float and long double variants) to convert from
floating-point to an integer type with any signedness and any given
width up to that of intmax_t, in any of the five IEEE rounding modes
(the usual four for binary floating point, plus rounding to nearest
with ties rounding away from zero), with control of whether in-range
non-integer values should result in the "inexact" exception being
raised.  This patch implements these functions for glibc.

These implementations are (apart from raising exceptions) pure integer
implementations; it's entirely possible optimized versions could be
devised for some architectures.  A common math/fromfp.h header
provides various common helper code that can readily be shared between
the implementations for different types.  For each type, the bulk of
the implementation is also shared between the four functions, with
wrappers that define UNSIGNED and INEXACT macros appropriately before
including the main implementation.

As the functions return intmax_t and uintmax_t without math.h being
allowed to expose those typedef names, they are declared using
__intmax_t and __uintmax_t as obtained from <bits/types.h>.

The FP_INT_* rounding direction macros are defined as ascending
integers in the order the names are listed in the TS; I see no
significant value in allowing architectures to vary the values of
them.

The libm-test machinery is duly adapted to handle unsigned int
arguments, and intmax_t and uintmax_t results.  Because each test
input is generally tested for four functions, five rounding modes and
several different widths, the libm-test.inc additions are very large.
Thus, the diffs in the body of this message exclude the libm-test.inc
changes, with the full patch being attached gzipped.  The bulk of the
new tests were generated (expanded from a test input plus rounding
results and information about where it lies in the relevant interval
between integers, to libm-test tests for all relevant combinations of
function, rounding direction and width) by a script that's included in
the patch as math/gen-fromfp-tests.py (input data
math/gen-fromfp-tests-inputs); as an ad hoc script that's not really
expected to be rerun, it's not very polished, but it's at least
plausibly useful for adding any further tests for these functions in
future.  I may split the libm-test tests up by function in future (so
both libm-test.inc and auto-libm-test-out are split into separate
files, and the tests for each function are also built and run
separately), but not for 2.25.

For no obvious reason, adding tgmath tests for the new functions
resulted in -Wuninitialized errors from test-tgmath.c about the
variable i being used uninitialized.  Those errors were correct - the
variable is read by the frexp version in test-tgmath.c (where real
frexp would write through that pointer instead of reading it) - but I
don't know why this patch would result in the pre-existing issue being
newly detected.  The patch initializes the variable to avoid those
errors.

With these changes, glibc 2.25 should have all the library features
from TS 18661-1 other than the functions that round result to narrower
type (and constant rounding directions, but I'm considering those
mainly a compiler feature not a library one).

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(fromfp): New declaration.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise.
	* math/tgmath.h (__TGMATH_TERNARY_FIRST_REAL_RET_ONLY): New macro.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfp): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise.
	* math/math.h: Include <bits/types.h>.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_INT_UPWARD): New enum
	constant and macro.
	(FP_INT_DOWNWARD): Likewise.
	(FP_INT_TOWARDZERO): Likewise.
	(FP_INT_TONEARESTFROMZERO): Likewise.
	(FP_INT_TONEAREST): Likewise.
	* math/Versions (fromfp): New libm symbol at version GLIBC_2.25.
	(fromfpf): Likewise.
	(fromfpl): Likewise.
	(ufromfp): Likewise.
	(ufromfpf): Likewise.
	(ufromfpl): Likewise.
	(fromfpx): Likewise.
	(fromfpxf): Likewise.
	(fromfpxl): Likewise.
	(ufromfpx): Likewise.
	(ufromfpxf): Likewise.
	(ufromfpxl): Likewise.
	* math/Makefile (libm-calls): Add s_fromfpF, s_ufromfpF,
	s_fromfpxF and s_ufromfpxF.
	* math/gen-fromfp-tests.py: New file.
	* math/gen-fromfp-tests-inputs: Likewise.
	* math/libm-test.inc: Include <stdint.h>
	(check_intmax_t): New function.
	(check_uintmax_t): Likewise.
	(struct test_fiu_M_data): New type.
	(struct test_fiu_U_data): Likewise.
	(RUN_TEST_fiu_M): New macro.
	(RUN_TEST_LOOP_fiu_M): Likewise.
	(RUN_TEST_fiu_U): Likewise.
	(RUN_TEST_LOOP_fiu_U): Likewise.
	(fromfp_test_data): New array.
	(fromfp_test): New function.
	(fromfpx_test_data): New array.
	(fromfpx_test): New function.
	(ufromfp_test_data): New array.
	(ufromfp_test): New function.
	(ufromfpx_test_data): New array.
	(ufromfpx_test): New function.
	(main): Call fromfp_test, fromfpx_test, ufromfp_test and
	ufromfpx_test.
	* math/gen-libm-test.pl (parse_args): Handle u, M and U descriptor
	characters.
	* math/test-tgmath-ret.c: Include <stdint.h>.
	(rm): New variable.
	(width): Likewise.
	(CHECK_RET_CONST_TYPE): Take extra arguments and pass them to
	called function.
	(CHECK_RET_CONST_FLOAT): Take extra arguments and pass them to
	CHECK_RET_CONST_TYPE.
	(CHECK_RET_CONST_DOUBLE): Likewise.
	(CHECK_RET_CONST_LDOUBLE): Likewise.
	(CHECK_RET_CONST): Take extra arguments and pass them to calls
	macros.
	(fromfp): New CHECK_RET_CONST call.
	(ufromfp): Likewise.
	(fromfpx): Likewise.
	(ufromfpx): Likewise.
	(do_test): Call check_return_fromfp, check_return_ufromfp,
	check_return_fromfpx and check_return_ufromfpx.
	* math/test-tgmath.c: Include <stdint.h>
	(NCALLS): Increase to 138.
	(F(compile_test)): Initialize i.  Call fromfp functions.
	(F(fromfp)): New function.
	(F(fromfpx)): Likewise.
	(F(ufromfp)): Likewise.
	(F(ufromfpx)): Likewise.
	* manual/arith.texi (Rounding Functions): Document FP_INT_UPWARD,
	FP_INT_DOWNWARD, FP_INT_TOWARDZERO, FP_INT_TONEARESTFROMZERO,
	FP_INT_TONEAREST, fromfp, fromfpf, fromfpl, ufromfp, ufromfpf,
	ufromfpl, fromfpx, fromfpxf, fromfpxl, ufromfpx, ufromfpxf and
	ufromfpxl.
	* manual/libm-err-tab.pl (@all_functions): Add fromfp, fromfpx,
	ufromfp and ufromfpx.
	* math/fromfp.h: New file.
	* sysdeps/ieee754/dbl-64/s_fromfp.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_fromfp_main.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_fromfpx.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_ufromfp.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_ufromfpx.c: Likewise.
	* sysdeps/ieee754/flt-32/s_fromfpf.c: Likewise.
	* sysdeps/ieee754/flt-32/s_fromfpf_main.c: Likewise.
	* sysdeps/ieee754/flt-32/s_fromfpxf.c: Likewise.
	* sysdeps/ieee754/flt-32/s_ufromfpf.c: Likewise.
	* sysdeps/ieee754/flt-32/s_ufromfpxf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_fromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_fromfpl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_fromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_ufromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_ufromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_fromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_fromfpl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_fromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_ufromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_ufromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_fromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_fromfpl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_fromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_ufromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_ufromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fromfp,
	ufromfp, fromfpx and ufromfpx.
	(CFLAGS-nldbl-fromfp.c): New variable.
	(CFLAGS-nldbl-fromfpx.c): Likewise.
	(CFLAGS-nldbl-ufromfp.c): Likewise.
	(CFLAGS-nldbl-ufromfpx.c): Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-compat.h: Include <stdint.h>.
	* sysdeps/ieee754/ldbl-opt/nldbl-fromfp.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-fromfpx.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-ufromfp.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-ufromfpx.c: Likewise.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-12-31 00:40:59 +00:00
Joseph Myers
41c67149b9 Add roundeven, roundevenf, roundevenl. 
TS 18661-1 defines roundeven functions that round a floating-point
number to the nearest integer, in that floating-point type, with ties
rounding to even (whereas the round functions round ties away from
zero).  As with other such functions, they raise no exceptions apart
from "invalid" for signaling NaNs.  There was a previous user request
for this functionality in glibc in
<https://sourceware.org/ml/libc-help/2015-02/msg00005.html>.

This patch implements these functions for glibc.  The implementations
use integer bit-manipulation (or roundeven on the high and low parts,
in the IBM long double case).  It's possible that there may be faster
approaches on some architectures (in particular, on AArch64 the frintn
instruction should do exactly what's required); I'll leave it to
architecture maintainers or others interested to implement such
architecture-specific versions if desired.  (Where architectures have
instructions to round to nearest integer in the current rounding mode,
implementations saving and restoring the rounding mode - and dealing
with exceptions if those instructions generate "inexact" - are also
possible, though their performance depends on the cost of manipulating
exceptions / rounding mode state.)

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(roundeven): New declaration.
	* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (roundeven): New
	macro.
	* math/Versions (roundeven): New libm symbol at version
	GLIBC_2.25.
	(roundevenf): Likewise.
	(roundevenl): Likewise.
	* math/Makefile (libm-calls): Add s_roundevenF.
	* math/libm-test.inc (roundeven_test_data): New array.
	(roundeven_test): New function.
	(main): Call roundeven_test.
	* math/test-tgmath.c (NCALLS): Increase to 134.
	(F(compile_test)): Call roundeven.
	(F(roundeven)): New function.
	* manual/arith.texi (Rounding Functions): Document roundeven,
	roundevenf and roundevenl.
	* manual/libm-err-tab.pl (@all_functions): Add roundeven.
	* include/math.h (roundeven): Use libm_hidden_proto.
	* sysdeps/ieee754/dbl-64/s_roundeven.c: New file.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_roundeven.c: Likewise.
	* sysdeps/ieee754/flt-32/s_roundevenf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_roundevenl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_roundevenl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_roundevenl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	roundeven.
	(CFLAGS-nldbl-roundeven.c): New variable.
	* sysdeps/ieee754/ldbl-opt/nldbl-roundeven.c: New file.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-12-21 01:48:27 +00:00
Joseph Myers
58307649fb Fix hypot sNaN handling (bug 20940). 
TS 18661-1 generally defines libm functions taking sNaN arguments to
return qNaN and raise "invalid", even for the cases where a
corresponding qNaN argument would not result in a qNaN return.  This
includes hypot with one argument being an infinity and the other being
an sNaN.  This patch duly fixes hypot implementatations in glibc
(generic and powerpc) to ensure qNaN, computed by arithmetic on the
arguments, is returned in that case.

Various implementations do their checks for infinities and NaNs inline
by manipulating the representations of the arguments.  For simplicity,
this patch just uses issignaling to check for sNaN arguments.  This
could be inlined like the existing code (with due care about reversed
quiet NaN conventions, for implementations where that is relevant),
but given that all these checks are in cases where it's already known
at least one argument is not finite, which should be the uncommon
case, that doesn't seem worthwhile unless performance issues are
observed in practice.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #20940]
	* sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Do not
	return Inf for arguments Inf and sNaN.
	* sysdeps/ieee754/flt-32/e_hypotf.c (__ieee754_hypotf): Likewise.
	* sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl):
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_hypotl.c (__ieee754_hypotl):
	Likewise.
	* sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise.
	* sysdeps/powerpc/fpu/e_hypot.c (TEST_INF_NAN): Do not return Inf
	for arguments Inf and sNaN.  When returning a NaN, compute it by
	arithmetic on the arguments.
	* sysdeps/powerpc/fpu/e_hypotf.c (TEST_INF_NAN): Likewise.
	* math/libm-test.inc (pow_test_data): Add tests of sNaN arguments.
 2016-12-07 01:16:36 +00:00
Joseph Myers
90ab295a9e Fix sysdeps/ieee754 pow handling of sNaN arguments (bug 20916). 
Various pow function implementations mishandle sNaN arguments in
various ways.  This includes returning sNaN instead of qNaN for sNaN
arguments.  For arguments (1, sNaN) and (sNaN, 0), TS 18661-1
semantics are also that the result should be qNaN, whereas with a qNaN
argument there the result should be 1, but for the dbl-64
implementation of pow there are issues with sNaN arguments beyond not
implementing the TS 18661-1 semantics in those special cases.

This patch makes the implementations in sysdeps/ieee754 follow the TS
18661-1 semantics consistently.  Because x86 / x86_64 implementations
still need fixing, testcases are not included with this patch; they
will be included with the fix for the x86 / x86_64 versions.

Tested for x86_64, x86, mips64 and powerpc (with such testcases, which
pass in the mips64 and powerpc cases).

	[BZ #20916]
	* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Do not return 1
	for arguments (sNaN, 0) or (1, sNaN).  Do arithmetic on NaN
	arguments to compute result.
	* sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Do not return
	1 for arguments (sNaN, 0) or (1, sNaN).
	* sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Likewise.
 2016-12-02 23:21:15 +00:00
Joseph Myers
72d839a42f Fix pow (qNaN, 0) result with -lieee (bug 20919), remove dead parts of wrappers. 
The dbl-64 implementation of __ieee754_pow returns a NaN for pow
(qNaN, 0) when it should return 1.  Normally this is covered up by the
wrappers ending up calling __kernel_standard which fixes up the result
for this case, but for -lieee the wrappers are bypassed and the bad
result gets through as a return value.

Now, the wrappers fixing this are dealing with variant error handling
that wants a result of NaN for pow (qNaN, 0), and only ever call
__kernel_standard for this case if NaN resulted from __ieee754_pow.
This leads to a question of whether the dbl-64 code might be
deliberately returning NaN in order to use those code paths.  However,
I can find no sign that this is deliberate.  If it were deliberate one
would expect other implementations to do the same, and would expect
the return of NaN to be very old, but it appears it came in by
accident when the present e_pow.c implementation replaced an fdlibm
implementation in 2001.  So it appears to be unintended that this path
through the pow wrapper could be used at all.

So this patch fixes the implementation to return 1 in this case as
expected.  This is consistent with all the other implementations.  The
relevant path through the wrappers is now unreachable, so is removed
(which is the main motivation of this patch: to avoid that path
becoming accidentally reachable when implementing TS 18661-1 semantics
that pow (sNaN, 0) should return qNaN with "invalid" raised).  Another
path that would require __ieee754_pow (0, 0) to return 0 is also
unreachable (as all implementations return 1, in accordance with C99
semantics), so is removed as well.

Note: we don't have anything set up to test -lieee, which in any case
is obsolescent (at some point we should remove the ability for new
programs to access _LIB_VERSION or define matherr and have it called
by glibc).  So testing will be implicit through sNaN tests added when
making sNaN inputs work correctly for pow functions.

Tested for x86_64 and x86.

	[BZ #20919]
	* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Do not return
	NaN first argument when raised to power 0.
	* math/w_pow.c (__pow): Do not check for NaN or zero results from
	raising to power zero.
	* math/w_powf.c (__powf): Likewise.
	* math/w_powl.c (__powl): Likewise.
	* sysdeps/ieee754/k_standard.c (__kernel_standard): Do not handle
	pow (0, 0) or pow (NaN, 0).
 2016-12-02 22:50:46 +00:00
Joseph Myers
457663a7cd Add setpayloadsig, setpayloadsigf, setpayloadsigl. 
TS 18661-1 defines functions for manipulating the payloads of NaNs.
This patch implements the setpayloadsig functions for glibc; these are
like the setpayload functions, but produce a signaling NaN instead of
a quiet NaN.

The substance of the implementation was included with the setpayload
implementation, so the new files here just need to wrap the main files
with different defines to build the new functions.

Because the functions store a signaling NaN via a pointer and the
libm-test macros choose a suitable initial value for the variable in
such a case by comparing with the expected value, the relevant macro
needs to clear exceptions after FE_INVALID may have been raised by
that comparison.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(setpayloadsig): New declaration.
	* math/Versions (setpayloadsig): New libm symbol at version
	GLIBC_2.25.
	(setpayloadsigf): Likewise.
	(setpayloadsigl): Likewise.
	* math/Makefile (libm-calls): Add s_setpayloadsigF.
	* math/libm-test.inc (RUN_TEST_Ff_b1): Call feclearexcept
	(FE_ALL_EXCEPT) after initializing EXTRA_VAR.
	(setpayloadsig_test_data): New array.
	(setpayloadsig_test): New function.
	(main): Call setpayloadsig_test.
	* manual/arith.texi (FP Bit Twiddling): Document setpayloadsig,
	setpayloadsigf and setpayloadsigl.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/dbl-64/s_setpayloadsig.c: New file.
	* sysdeps/ieee754/flt-32/s_setpayloadsigf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_setpayloadsigl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_setpayloadsigl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_setpayloadsigl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-setpayloadsig.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	setpayloadsig.
	(CFLAGS-nldbl-setpayloadsig.c): New variable.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-11-24 23:56:48 +00:00
Joseph Myers
eb3c12c784 Add setpayload, setpayloadf, setpayloadl. 
TS 18661-1 defines functions for manipulating the payloads of NaNs.
This patch implements the setpayload functions for glibc; these set a
number (pointed to by a function argument) to a quiet NaN with the
given payload, or to +0 if the given payload is not valid.  The
implementations are structured to allow the substance of the
implementation to be shared with the setpayloadsig functions when
those are added.

The semantics in the TS are not entirely clear in the case where the
payload passed to the function is zero (see discussion on the WG14
reflector last month).  This patch implements what seems the most
sensible interpretation, that -0 is never valid to give as the
payload, but +0 is valid in the case where the kind of NaN being
generated has its high mantissa bit set so payload 0 is actually
possible in such a NaN.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(setpayload): New declaration.
	* math/Versions (setpayload): New libm symbol at version
	GLIBC_2.25.
	(setpayloadf): Likewise.
	(setpayloadl): Likewise.
	* math/Makefile (libm-calls): Add s_setpayloadF.
	* math/libm-test.inc (struct test_Ffp_b1_data): Rename to struct
	test_Ff_b1_data.
	(RUN_TEST_Ff_b1): New macro.
	(RUN_TEST_LOOP_Ff_b1): Likewise.
	(canonicalize_test_data): Update type.
	(setpayload_test_data): New array.
	(setpayload_test): New function.
	(main): Call setpayload_test.
	* manual/arith.texi (FP Bit Twiddling): Document setpayload,
	setpayloadf and setpayloadl.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/dbl-64/s_setpayload.c: New file.
	* sysdeps/ieee754/dbl-64/s_setpayload_main.c: Likewise.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_setpayload_main.c:
	Likewise.
	* sysdeps/ieee754/flt-32/s_setpayloadf.c: Likewise.
	* sysdeps/ieee754/flt-32/s_setpayloadf_main.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_setpayloadl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_setpayloadl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_setpayloadl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_setpayloadl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_setpayloadl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_setpayloadl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-setpayload.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	setpayload.
	(CFLAGS-nldbl-setpayload.c): New variable.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-11-19 00:16:28 +00:00
Joseph Myers
f8e8b8ed9f Add getpayload, getpayloadf, getpayloadl. 
TS 18661-1 defines functions for manipulating the payloads of NaNs.
This patch implements the getpayload functions for glibc; these
extract the NaN payload (from an argument passed as a pointer, for
which corresponding libm-test support is added) and return it in the
same floating-point type.  The return value of these functions is
unspecified for non-NaN arguments; the patch does the simplest thing
to implement, which is that the functions do not check whether the
argument is a NaN and just treat the relevant bits of the
representation as a payload regardless.  A conversion from integer to
floating-point is used to produce the required return value, except in
the ldbl-128 case; as 128-bit integers are not supported for all
configurations using ldbl-128, the code constructs the required
floating-point representation of the return value directly instead.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(getpayload): New declaration.
	* math/Versions (getpayload): New libm symbol at version
	GLIBC_2.25.
	(getpayloadf): Likewise.
	(getpayloadl): Likewise.
	* math/Makefile (libm-calls): Add s_getpayloadF.
	* math/libm-test.inc: Include <nan-high-order-bit.h>.
	(struct test_f_f_data): Add comment.
	(RUN_TEST_fp_f): New macro.
	(RUN_TEST_LOOP_fp_f): Likewise.
	(getpayload_test_data): New array.
	(getpayload_test): New function.
	(main): Call getpayload_test.
	* math/gen-libm-test.pl (parse_args): Handle 'p' in argument
	descriptor.
	* manual/arith.texi (FP Bit Twiddling): Document getpayload,
	getpayloadf and getpayloadl.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/dbl-64/s_getpayload.c: New file.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_getpayload.c: Likewise.
	* sysdeps/ieee754/flt-32/s_getpayloadf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_getpayloadl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_getpayloadl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_getpayloadl.c: Likewise.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-10-19 01:49:09 +00:00
Joseph Myers
6f322a8947 Define HIGH_ORDER_BIT_IS_SET_FOR_SNAN to 0 or 1. 
This patch moves the HIGH_ORDER_BIT_IS_SET_FOR_SNAN macro from being
defined or undefined to the preferred convention of always being
defined, to either 0 or 1, so allowing typo-proof tests with #if.

The macro is moved from math_private.h to a new header
nan-high-order-bit.h to make it easy for all architectures to define,
either through the sysdeps/generic version of the header or through
providing their own version of the header, without needing #ifndef in
the generic math_private.h to give a default definition.  The move
also allows the macro to be used without needing math_private.h to be
included; the immediate motivation of this patch is to allow tests to
access this information (to know what kinds of NaNs 0 is a valid
payload for) without needing to include math_private.h.  Existing
C level rather than preprocessor conditionals at all, but this patch
does not make such a change).

Tested for x86_64 and x86 (testsuite); also verified for x86_64, x86,
mips64 and powerpc that installed stripped shared libraries are
unchanged by the patch.

	* sysdeps/generic/nan-high-order-bit.h: New file.
	* sysdeps/hppa/nan-high-order-bit.h: Likewise.
	* sysdeps/mips/nan-high-order-bit.h: Likewise.
	* sysdeps/hppa/math_private.h: Remove file.
	* sysdeps/mips/math_private.h (HIGH_ORDER_BIT_IS_SET_FOR_SNAN): Do
	not define here.
	* sysdeps/ieee754/dbl-64/s_issignaling.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/dbl-64/s_totalorder.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/dbl-64/s_totalordermag.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_issignaling.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/flt-32/s_issignalingf.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/flt-32/s_totalorderf.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/flt-32/s_totalordermagf.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/ldbl-128/s_issignalingl.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/ldbl-128ibm/s_issignalingl.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/ldbl-96/s_issignalingl.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
 2016-10-17 22:48:51 +00:00
Joseph Myers
cc6a8d7457 Add totalordermag, totalordermagf, totalordermagl. 
In addition to the totalorder functions, TS 18661-1 defines
totalordermag functions, which do the same comparison but on the
absolute values of the arguments.  This patch implements these
functions for glibc, including the type-generic macro in <tgmath.h>.
In general the implementations are similar to but simpler than those
for the totalorder functions.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(totalordermag): New declaration.
	* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag):
	New macro.
	* math/Versions (totalordermag): New libm symbol at version
	GLIBC_2.25.
	(totalordermagf): Likewise.
	(totalordermagl): Likewise.
	* math/Makefile (libm-calls): Add s_totalordermagF.
	* math/libm-test.inc (totalordermag_test_data): New array.
	(totalordermag_test): New function.
	(main): Call totalordermag_test.
	* math/test-tgmath.c (NCALLS): Increase to 125.
	(F(compile_test)): Call totalordermag.
	(F(totalordermag)): New function.
	* manual/arith.texi (FP Comparison Functions): Document
	totalordermag, totalordermagf and totalordermagl.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/dbl-64/s_totalordermag.c: New file.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Likewise.
	* sysdeps/ieee754/flt-32/s_totalordermagf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	totalordermag.
	(CFLAGS-nldbl-totalordermag.c): New variable.
	* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c
	(do_test): Also test totalordermagl.
	* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test):
	Likewise.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-10-15 00:36:48 +00:00
steve ellcey-CA Eng-Software
e223d1fe72 Fix warnings from latest GCC. 
* sysdeps/ieee754/dbl-64/e_pow.c (checkint) Make conditions explicitly
	boolean.
 2016-10-14 12:53:27 -07:00
Joseph Myers
5e9d98a3d9 Add totalorder, totalorderf, totalorderl. 
TS 18661-1 defines totalorder functions implementing the totalOrder
comparison operation from IEEE 754-2008.  This patch implements these
functions for glibc, including the type-generic macro in <tgmath.h>.
(The totalordermag functions will be added in a separate patch.)

The description of the totalOrder operation is complicated.  However,
for IEEE interchange binary formats and the preferred quiet NaN
convention, what that complicated description means is that you
interpret the representation as a sign-magnitude integer (with -0
coming before +0) and do a <= comparison on that interpretation.  For
finite values and infinities the ordering of the sign-magnitude
integers is just the same as the ordering of floating-point values, so
this extends that to all representations.  (Different representations
of the same floating-point value - which includes same quantum in the
decimal case - must still be considered equal by this operation, but
that issue doesn't arise for IEEE interchange binary formats.)  So the
complications are:

* When MIPS quiet NaN conventions are in use, the representation of
  NaNs needs adjusting before making such an integer comparison.  This
  patch does this adjustment only when both arguments are NaNs, as
  there's no need for it if only one is a NaN, and as long as both are
  NaNs you can just flip the relevant bits without any problems from
  this turning a NaN into an infinity.

* For the m68k version of ldbl-96, where the high mantissa bit is
  "don't care" for infinities and NaNs, representations where it
  differs must compare the same.  Note: although the testcase for this
  compiles, I have not actually tested on m68k.

* For ldbl-128ibm, the low part must be ignored when the high part is
  NaN, and low parts of +0 and -0 must be considered the same whatever
  the high part.

The new tests in libm-test.inc are the first tests there specifying
particular payloads for input NaNs.  Separate tests are also added for
the ldbl-96 and ldbl-128ibm special cases where there are different
representations of the same value that must compare equal (which can't
be covered in libm-test.inc as that only specifies values, not
representations).

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(totalorder): New declaration.
	* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder):
	New macro.
	* math/Versions (totalorder): New libm symbol at version
	GLIBC_2.25.
	(totalorderf): Likewise.
	(totalorderl): Likewise.
	* math/Makefile (libm-calls): Add s_totalorderF.
	* math/gen-libm-test.pl (parse_args): Escape quotes in test name
	string.
	* math/libm-test.inc (PAYLOAD_DIG): New macro.
	(qnan_value_pl): Likewise.
	(snan_value_pl): Likewise.
	(qnan_value): Define using qnan_value_pl.
	(snan_value): Define using snan_value_pl.
	(struct test_ff_i_data): Add comment about which tests use this
	structure.
	(RUN_TEST_ff_b): New macro.
	(RUN_TEST_LOOP_ff_b): Likewise.
	(totalorder_test_data): New array.
	(totalorder_test): New function.
	(main): Call totalorder_test.
	* math/test-tgmath.c (NCALLS): Increase to 122.
	(F(compile_test)): Call totalorder.
	(F(totalorder)): New function.
	* manual/arith.texi (FP Comparison Functions): Document
	totalorder, totalorderf and totalorderl.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/dbl-64/s_totalorder.c: New file.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Likewise.
	* sysdeps/ieee754/flt-32/s_totalorderf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_totalorderl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_totalorderl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	totalorder.
	(CFLAGS-nldbl-totalorder.c): New variable.
	* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c: New
	file.
	* sysdeps/ieee754/ldbl-128ibm/Makefile [$(subdir) = math] (tests):
	Add test-totalorderl-ldbl-128ibm.
	* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c: New file.
	* sysdeps/ieee754/ldbl-96/Makefile [$(subdir) = math] (tests): Add
	test-totalorderl-ldbl-96.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-10-12 01:20:30 +00:00
Siddhesh Poyarekar
36ee03e6a8 Update comments for some functions in s_sin.c 
Update comments for some functions to bring them in sync with what the
functions are actually doing.
 2016-10-06 13:09:02 +05:30
Siddhesh Poyarekar
9cb069308c Adjust calls to do_sincos_1 and do_sincos_2 in s_sincos.c 
Adjust calls to do_sincos_1 and do_sincos_2 to pass a boolean
shift_quadrant instead of the numeric 0 and 1.

This does not affect codegen.
 2016-10-06 12:57:07 +05:30
Siddhesh Poyarekar
ead1ef37d2 Make quadrant shift a boolean in reduce_and_compute in s_sin.c 
Like the previous change, make the quadrant shift a boolean to make it
clearer that we will do at most a single rotation of the quadrants to
compute the cosine from the sine function.

This does not affect codegen.
 2016-10-06 12:54:04 +05:30
Siddhesh Poyarekar
ba4e688461 Check n instead of k1 to decide on sign of sin/cos result 
For k1 in 1 and 3, n can only have values of 0 and 2, so checking k1 &
2 is equivalent to checking n & 2.  We prefer the latter so that we
don't use k1 for anything other than selecting the quadrant in
do_sincos_1, thus dropping it completely.

The previous logic was:

    "Compute sine for the value and based on the new rotated quadrant
     (k1) negate the value if we're in the fourth quadrant."

With this change, the logic now is:

    "Compute sine for the value and negate it if we were either (1) in
     the fourth quadrant or (2) we actually wanted the cosine and were
     in the third quadrant."

	* sysdeps/ieee754/dbl-64/s_sin.c (do_sincos_1): Check N
	instead of K1.
 2016-10-06 00:34:26 +05:30
Siddhesh Poyarekar
b8b7e5e644 Make the quadrant shift K a bool in do_sincos_* functions 
The do_sincos_* functions are helpers to compute sin/cos, where they
get cosine by computing sine for the next quadrant.  This is decided
with the value of K passed to it, which is the amount by which to
shift the quadrant.  Since we will only need the shift to be 0 or 1,
we make K a bool to make that explicit.

	* sysdeps/ieee754/dbl-64/s_sin.c (do_sincos_1): Rename K to
	SHIFT_QUADRANT and make it bool.
	(do_sincos_2): Likewise.
	(sloww): Likewise.
	(sloww1): Likewise.
	(__sin): Adjust calls to do_sincos_1 and do_sincos_2.
	(__cos): Likewise.
 2016-10-06 00:33:54 +05:30
Joseph Myers
f280fa6d17 Use __builtin_fma more in dbl-64 code. 
sysdeps/ieee754/dbl-64/dla.h can use a macro DLA_FMS for more
efficient double-width operations when fused multiply-subtract is
supported.  However, this macro is only defined for x86_64,
conditional on architecture-specific __FMA4__.  This patch makes the
code use __builtin_fma conditional on __FP_FAST_FMA, as used elsewhere
in glibc.

Tested for x86_64, x86 and powerpc.  On powerpc (where this is causing
fused operations to be used where they weren't previously) I see an
increase from 1ulp to 2ulp in the imaginary part of clog10:

testing double (without inline functions)
Failure: Test: Imaginary part of: clog10 (0x1.7a858p+0 - 0x6.d940dp-4 i)
Result:
 is:         -1.2237865208199886e-01  -0x1.f5435146bb61ap-4
 should be:  -1.2237865208199888e-01  -0x1.f5435146bb61cp-4
 difference:  2.7755575615628914e-17   0x1.0000000000000p-55
 ulp       :  2.0000
 max.ulp   :  1.0000
Maximal error of real part of: clog10
 is      : 3 ulp
 accepted: 3 ulp
Maximal error of imaginary part of: clog10
 is      : 2 ulp
 accepted: 1 ulp

This is actually resulting from atan2 becoming *more* accurate (atan2
(-0x6.d940dp-4, 0x1.7a858p+0) should ideally be -0x1.208cd6e841554p-2
but was -0x1.208cd6e841555p-2 from a powerpc libm built before this
change, and is -0x1.208cd6e841554p-2 from a powerpc libm built after
this change).  Since these functions are not expected to be correctly
rounding by glibc's accuracy goals, neither result is a problem, but
this does imply that some of this code, although designed to be
correctly rounding, is not in fact correctly rounding (possibly
because of GCC creating fused operations where the code does not
expect it, something we've only disabled for specific functions where
it was found to cause large errors).  (Of course as previously
discussed I think we should remove the slow cases where an error
analysis shows this wouldn't increase the errors much above 0.5ulp;
it's only functions such as cratan2 that are expected to be correctly
rounding, not atan2.)

	* sysdeps/ieee754/dbl-64/dla.h [__FP_FAST_FMA] (DLA_FMS): Define
	macro to use __builtin_fma.
	* sysdeps/x86_64/fpu/dla.h: Remove file.
 2016-09-30 15:49:51 +00:00
Siddhesh Poyarekar
2bf499708d Use copysign instead of ternary for some sin/cos input ranges 
These are remaining cases where we can deduce and conclude that the
sign of the result should be the same as the sign of the input being
checked.  For example, for sin(x), the sign of the result is the same
as the result itself for x < pi.  Likewise, for sine values where x
after range reduction falls into this range and its sign is preserved.

	* sysdeps/ieee754/dbl-64/s_sin.c (do_sincos_1): Use copysign
	instead of ternary condition.
	(do_sincos_2): Likewise.
	(__sin): Likewise.
	(__cos): Likewise.
	(slow): Likewise.
	(sloww): Likewise.
	(sloww1): Likewise.
	(bsloww): Likewise.
	(bsloww1): Likewise.
 2016-09-30 05:19:05 +05:30
Siddhesh Poyarekar
3459931a1a Use copysign instead of ternary conditions for positive constants 
This is the first very simple substitution of ternary conditions for
correction adjustments with __copysign for positive constants.

	* sysdeps/ieee754/dbl-64/s_sin.c (do_cos_slow): use copysign
	instead of ternary condition.
	(do_sin_slow): Likewise.
	(do_sincos_1): Likewise.
	(do_sincos_2): Likewise.
	(__cos): Likewise.
	(sloww): Likewise.
	(sloww1): Likewise.
	(sloww2): Likewise.
	(bsloww): Likewise.
	(bsloww1): Likewise.
	(bsloww2): Likewise.
 2016-09-30 05:17:55 +05:30
Siddhesh Poyarekar
a87b5e95ad consolidate sign checks for slow2 
Simplify the code a bit by consolidating sign checks in slow1 and
slow2 into __sin at the higher level.

	* sysdeps/ieee754/dbl-64/s_sin.c (slow1): Consolidate sign
	check from here...
	(slow2): ... and here...
	(__sin): ... to here.
 2016-09-30 05:15:56 +05:30
Siddhesh Poyarekar
54c86ccab6 Inline all support functions for sin and cos 
The support functions for sin and cos have a lot of identical
functionality, so inlining them gives a pretty decent jump in
functionality: ~19% in the sincos function.  On SPEC2006 this
translates to about 2.1% in the tonto test.

	* sysdeps/ieee754/dbl-64/s_sin.c (do_cos): Mark as inline.
	(do_cos_slow): Likewise.
	(do_sin): Likewise.
	(do_sin_slow): Likewise.
	(slow): Likewise.
	(slow1): Likewise.
	(slow2): Likewise.
	(sloww): Likewise.
	(sloww1): Likewise.
	(sloww2): Likewise.
	(bsloww): Likewise.
	(bsloww1): Likewise.
	(bsloww2): Likewise.
	(cslow2): Likewise.
 2016-09-02 20:08:41 +05:30
Siddhesh Poyarekar
25e440c6c7 Use do_sin for sin(x) where 0.25 < |x| < 0.855469 
The only code looks slightly different from do_sin but on closer
examination, should give exactly the same result.  Drop it in favour
of the do_sin function call.

	* sysdeps/ieee754/dbl-64/s_sin.c (__sin): Use do_sin.
 2016-09-02 20:08:41 +05:30
Siddhesh Poyarekar
758e79ec89 Consolidate input partitioning into do_cos and do_sin 
All calls to do_cos are preceded by code that partitions x into a
larger double that gives an offset into the sincos table and a smaller
double that is used in a polynomial computation.  Consolidate all of
them into do_cos and do_sin to reduce code duplication.

	* sysdeps/ieee754/dbl-64/s_sin.c (do_cos): Accept X and DX as input
	arguments.  Consolidate input partitioning from callers here.
	(do_cos_slow): Likewise.
	(do_sin): Likewise.
	(do_sin_slow): Likewise.
	(do_sincos_1): Remove the no longer necessary input partitioning.
	(do_sincos_2): Likewise.
	(__sin): Likewise.
	(__cos): Likewise.
	(slow1): Likewise.
	(slow2): Likewise.
	(sloww1): Likewise.
	(sloww2): Likewise.
	(bsloww1): Likewise.
	(bsloww2): Likewise.
	(cslow2): Likewise.
 2016-09-02 20:08:41 +05:30
Siddhesh Poyarekar
9d84d0e51d Use fabs(x) instead of branching on signedness of input to sin and cos 
The sin and cos code is inconsistent about its use of fabs to get the
absolute value of X where in some places it conditionalizes the code
while in others it uses fabs.  fabs seems to be a better candidate in
most cases because it avoids a branch.  Similarly there is an attempt
to make it easier for the compiler to emit conditional assignment
instructions (like fcsel on aarch64) where it can, by isolating
conditional assignment constructs from the rest of the expression.

A further benefit of this change is to identify common constructs
across functions and consolidate them in future patches.

	* sysdeps/ieee754/dbl-64/s_sin.c (do_cos_slow): Use ternary
	instead of if/else.
	(do_sin_slow): Likewise.
	(do_sincos_1): Use fabs instead of if/else.
	(do_sincos_2): Likewise.
	(__sin): Likewise.
	(__cos): Likewise.
	(slow2): Likewise.
	(sloww): Likewise.
	(sloww1): Likewise.  Drop argument M.
	(sloww2): Use fabs instead of if/else.
	(bsloww): Likewise.
	(bsloww1): Likewise.
	(bsloww2): Likewise.
 2016-08-30 13:01:59 +05:30
Siddhesh Poyarekar
1a822c6184 Add fall through comments 
Add fall through comments I had missed writing in previously.
 2016-08-30 13:00:29 +05:30
Siddhesh Poyarekar
32efd690bd Consolidate reduce_and_compute code 
This patch reshuffles the reduce_and_compute code so that the
structure matches other code structures of the same type elsewhere in
s_sin.c and s_sincos.c.  This is the beginning of an attempt to
consolidate and reduce code duplication in functions in s_sin.c to
make it easier to read and possibly also easier for the compiler to
optimize.

	* sysdeps/ieee754/dbl-64/s_sin.c (reduce_and_compute):
	Consolidate switch cases 0 and 2.
 2016-08-30 12:51:39 +05:30
Paul E. Murphy
4482ff226e Merge common usage of mul_split function 
A number of files share identical code for the
mul_split function.

This moves the duplicated function mul_split into its
own header, and refactors the fma usage into a single
selection macro.  Likewise, mul_split when used by a
long double implementation is renamed mul_splitl for
clarity.
 2016-08-19 11:29:43 -05:00
Stefan Liebler
b65f0b7b2e Get rid of array-bounds warning in __kernel_rem_pio2[f] with gcc 6.1 -O3. 
On s390x I get the following werror when build with gcc 6.1 (or current gcc head) and -O3:
../sysdeps/ieee754/dbl-64/k_rem_pio2.c: In function ‘__kernel_rem_pio2’:
../sysdeps/ieee754/dbl-64/k_rem_pio2.c:254:18: error: array subscript is below array bounds [-Werror=array-bounds]
    for (k = 1; iq[jk - k] == 0; k++)
                ~~^~~~~~~~
I get the same error with sysdeps/ieee754/flt-32/k_rem_pio2f.c.

This patch adds DIAG_* macros around it.

ChangeLog:

	* sysdeps/ieee754/dbl-64/k_rem_pio2.c (__kernel_rem_pio2):
	Use DIAG_*_NEEDS_COMMENT macro to get rid of array-bounds warning.
	* sysdeps/ieee754/flt-32/k_rem_pio2f.c (__kernel_rem_pio2f):
	Likewise.
 2016-08-18 12:20:35 +02:00
Aurelien Jarno
bdf20beac1 sparc64: add a VIS3 version of ceil, floor and trunc 
sparc64 passes floating point values in the floating point registers.
As the the generic ceil, floor and trunc functions use integer
instructions, it makes sense to provide a VIS3 version consisting in
the the generic version compiled with -mvis3. GCC will then use
movdtox, movxtod, movwtos and movstow instructions.

sparc32 passes the floating point values in the integer registers, so it
doesn't make sense to do the same.

Changelog:
	* sysdeps/ieee754/dbl-64/s_trunc.c: Avoid alias renamed.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_trunc.c: Likewise.
	* sysdeps/ieee754/flt-32/s_truncf.c: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/Makefile
	[$(subdir) = math && $(have-as-vis3) = yes] (libm-sysdep_routines):
	Add s_ceilf-vis3, s_ceil-vis3, s_floorf-vis3, s_floor-vis3,
	s_truncf-vis3, s_trunc-vis3.
	(CFLAGS-s_ceilf-vis3.c): New. Set to -Wa,-Av9d -mvis3.
	(CFLAGS-s_ceil-vis3.c): Likewise.
	(CFLAGS-s_floorf-vis3.c): Likewise.
	(CFLAGS-s_floor-vis3.c): Likewise.
	(CFLAGS-s_truncf-vis3.c): Likewise.
	(CFLAGS-s_trunc-vis3.c): Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-vis3.c: New file.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil.c: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-vis3.c: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf.c: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_floor-vis3.c: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_floor.c: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-vis3.c: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.c: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc-vis3.c: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc.c: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf-vis3.c: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf.c: Likewise.
 2016-08-03 13:35:22 +02:00
Siddhesh Poyarekar
cbf88869ed Fix cos computation for multiple precision fallback (bz #20357) 
During the sincos consolidation I made two mistakes, one was a logical
error due to which cos(0x1.8475e5afd4481p+0) returned
sin(0x1.8475e5afd4481p+0) instead.

The second issue was an error in negating inputs for the correct
quadrants for sine.  I could not find a suitable test case for this
despite running a program to search for such an input for a couple of
hours.

Following patch fixes both issues.  Tested on x86_64.  Thanks to Matt
Clay for identifying the issue.

	[BZ #20357]
	* sysdeps/ieee754/dbl-64/s_sin.c (sloww): Fix up condition
	to call __mpsin/__mpcos and to negate values.
	* math/auto-libm-test-in: Add test.
	* math/auto-libm-test-out: Regenerate.
 2016-07-18 22:33:09 +05:30
Rajalakshmi Srinivasaraghavan
41a359e22f Add nextup and nextdown math functions 
TS 18661 adds nextup and nextdown functions alongside nextafter to provide
support for float128 equivalent to it.  This patch adds nextupl, nextup,
nextupf, nextdownl, nextdown and nextdownf to libm before float128 support.

The nextup functions return the next representable value in the direction of
positive infinity and the nextdown functions return the next representable
value in the direction of negative infinity.  These are currently enabled
as GNU extensions.
 2016-06-16 21:37:45 +05:30
Joseph Myers
a2ae1696f7 Fix dbl-64 atan2 (sNaN, qNaN) (bug 20252). 
The dbl-64 implementation of atan2, passed arguments (sNaN, qNaN),
fails to raise the "invalid" exception.  This patch fixes it to add
both arguments, rather than just adding the second argument to itself,
in the case where the second argument is a NaN (which is checked for
before checking for the first argument being a NaN).  sNaN tests for
atan2 are added, along with some qNaN tests I noticed were missing but
should have been there by analogy with other tests present.

Tested for x86_64 and x86.

	[BZ #20252]
	* sysdeps/ieee754/dbl-64/e_atan2.c (__ieee754_atan2): Add both
	arguments when second argument is a NaN.
	* math/libm-test.inc (atan2_test_data): Add sNaN tests and more
	qNaN tests.
 2016-06-13 21:43:22 +00:00
Joseph Myers
88283451b2 Fix frexp (NaN) (bug 20250). 
Various implementations of frexp functions return sNaN for sNaN
input.  This patch fixes them to add such arguments to themselves so
that qNaN is returned.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #20250]
	* sysdeps/i386/fpu/s_frexpl.S (__frexpl): Add non-finite input to
	itself.
	* sysdeps/ieee754/dbl-64/s_frexp.c (__frexp): Add non-finite or
	zero input to itself.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_frexp.c (__frexp):
	Likewise.
	* sysdeps/ieee754/flt-32/s_frexpf.c (__frexpf): Likewise.
	* sysdeps/ieee754/ldbl-128/s_frexpl.c (__frexpl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_frexpl.c (__frexpl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_frexpl.c (__frexpl): Likewise.
	* math/libm-test.inc (frexp_test_data): Add sNaN tests.
 2016-06-13 17:27:19 +00:00
Joseph Myers
3d8b06bc61 Fix dbl-64 asin (sNaN) (bug 20213). 
The dbl-64 version of asin returns sNaN for sNaN arguments.  This
patch fixes it to add NaN arguments to themselves so that qNaN is
returned in this case.

Tested for x86_64 and x86.

	[BZ #20213]
	* sysdeps/ieee754/dbl-64/e_asin.c (__ieee754_asin): Add NaN
	argument to itself.
	* math/libm-test.inc (asin_test_data): Add sNaN tests.
 2016-06-06 22:21:11 +00:00
Joseph Myers
af0cfbaf1d Fix dbl-64 acos (sNaN) (bug 20212). 
The dbl-64 version of acos returns sNaN for sNaN arguments.  This
patch fixes it to add NaN arguments to themselves so that qNaN is
returned in this case.

Tested for x86_64 and x86.

	[BZ #20212]
	* sysdeps/ieee754/dbl-64/e_asin.c (__ieee754_acos): Add NaN
	argument to itself.
	* math/libm-test.inc (acos_test_data): Add sNaN tests.
 2016-06-06 22:10:11 +00:00
Joseph Myers
078d1cf8ac Do not raise "inexact" from generic round (bug 15479). 
C99 and C11 allow but do not require ceil, floor, round and trunc to
raise the "inexact" exception for noninteger arguments.  TS 18661-1
requires that this exception not be raised by these functions.  This
aligns them with general IEEE semantics, where "inexact" is only
raised if the final step of rounding the infinite-precision result to
the result type is inexact; for these functions, the
infinite-precision integer result is always representable in the
result type, so "inexact" should never be raised.

The generic implementations of ceil, floor and round functions contain
code to force "inexact" to be raised.  This patch removes it for round
functions to align them with TS 18661-1 in this regard.  The tests
*are* updated by this patch; there are fewer architecture-specific
versions than for ceil and floor, and I fixed the powerpc ones some
time ago.  If any others still have the issue, as shown by tests for
round failing with spurious exceptions, they can be fixed separately
by architecture maintainers or others.

Tested for x86_64, x86 and mips64.

	[BZ #15479]
	* sysdeps/ieee754/dbl-64/s_round.c (huge): Remove variable.
	(__round): Do not force "inexact" exception.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_round.c (huge): Remove
	variable.
	(__round): Do not force "inexact" exception.
	* sysdeps/ieee754/flt-32/s_roundf.c (huge): Remove variable.
	(__roundf): Do not force "inexact" exception.
	* sysdeps/ieee754/ldbl-128/s_roundl.c (huge): Remove variable.
	(__roundl): Do not force "inexact" exception.
	* sysdeps/ieee754/ldbl-96/s_roundl.c (huge): Remove variable.
	(__roundl): Do not force "inexact" exception.
	* math/libm-test.inc (round_test_data): Do not allow spurious
	"inexact" exceptions.
 2016-05-24 17:46:55 +00:00
Joseph Myers
876c5bd30c Do not raise "inexact" from generic floor (bug 15479). 
C99 and C11 allow but do not require ceil, floor, round and trunc to
raise the "inexact" exception for noninteger arguments.  TS 18661-1
requires that this exception not be raised by these functions.  This
aligns them with general IEEE semantics, where "inexact" is only
raised if the final step of rounding the infinite-precision result to
the result type is inexact; for these functions, the
infinite-precision integer result is always representable in the
result type, so "inexact" should never be raised.

The generic implementations of ceil, floor and round functions contain
code to force "inexact" to be raised.  This patch removes it for floor
functions to align them with TS 18661-1 in this regard.  Note that
some architecture-specific versions may still raise "inexact", so the
tests are not updated and the bug is not yet fixed.

Tested for x86_64, x86 and mips64.

	[BZ #15479]
	* sysdeps/ieee754/dbl-64/s_floor.c: Do not mention "inexact"
	exception in comment.
	(huge): Remove variable.
	(__floor): Do not force "inexact" exception.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_floor.c: Do not mention
	"inexact" exception in comment.
	(huge): Remove variable.
	(__floor): Do not force "inexact" exception.
	* sysdeps/ieee754/flt-32/s_floorf.c: Do not mention "inexact"
	exception in comment.
	(huge): Remove variable.
	(__floorf): Do not force "inexact" exception.
	* sysdeps/ieee754/ldbl-128/s_floorl.c: Do not mention "inexact"
	exception in comment.
	(huge): Remove variable.
	(__floorl): Do not force "inexact" exception.
 2016-05-24 17:44:46 +00:00
Joseph Myers
ac2cc6f021 Do not raise "inexact" from generic ceil (bug 15479). 
C99 and C11 allow but do not require ceil, floor, round and trunc to
raise the "inexact" exception for noninteger arguments.  TS 18661-1
requires that this exception not be raised by these functions.  This
aligns them with general IEEE semantics, where "inexact" is only
raised if the final step of rounding the infinite-precision result to
the result type is inexact; for these functions, the
infinite-precision integer result is always representable in the
result type, so "inexact" should never be raised.

The generic implementations of ceil, floor and round functions contain
code to force "inexact" to be raised.  This patch removes it for ceil
functions to align them with TS 18661-1 in this regard.  Note that
some architecture-specific versions may still raise "inexact", so the
tests are not updated and the bug is not yet fixed.

Tested for x86_64, x86 and mips64.

	[BZ #15479]
	* sysdeps/ieee754/dbl-64/s_ceil.c: Do not mention "inexact"
	exception in comment.
	(huge): Remove variable.
	(__ceil): Do not force "inexact" exception.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_ceil.c: Do not mention
	"inexact" exception in comment.
	(huge): Remove variable.
	(__ceil): Do not force "inexact" exception.
	* sysdeps/ieee754/flt-32/s_ceilf.c (huge): Remove variable.
	(__ceilf): Do not force "inexact" exception.
	* sysdeps/ieee754/ldbl-128/s_ceill.c: Do not mention "inexact"
	exception in comment.
	(huge): Remove variable.
	(__ceill): Do not force "inexact" exception.
 2016-05-24 17:42:10 +00:00
Joseph Myers
dcb133b7a4 Fix __finitel libm compat symbol version. 
The changes to restrict implementation-namespace symbol aliases such
as __finitel to compat symbols used code for __finitel in libm
analogous to that for __finitel in libc.  However, the versions for
the two symbols are actually different, GLIBC_2.0 in libc and
GLIBC_2.1 in libm.  This patch fixes the handling of the libm compat
symbol.

Tested for mips (o32), where it fixes an ABI test failure.

	* sysdeps/ieee754/dbl-64/s_finite.c
	[NO_LONG_DOUBLE && LDBL_CLASSIFY_COMPAT] (__finitel): Define
	compat symbol at version GLIBC_2_1 and use GLIBC_2_1 in
	SHLIB_COMPAT condition for libm, not GLIBC_2_0.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_finite.c
	[NO_LONG_DOUBLE && LDBL_CLASSIFY_COMPAT] (__finitel): Likewise.
 2016-01-20 19:04:43 +00:00
H.J. Lu
09245377da Call math_opt_barrier inside if 
Since floating-point operation may trigger floating-point exceptions,
we call math_opt_barrier inside if to prevent code motion.

	[BZ #19465]
	* sysdeps/ieee754/dbl-64/s_fma.c (__fma): Call math_opt_barrier
	inside if.
	* sysdeps/ieee754/ldbl-128/s_fmal.c (__fmal): Likewise.
	* sysdeps/ieee754/ldbl-96/s_fma.c (__fma): Likewise.
	* sysdeps/ieee754/ldbl-96/s_fmal.c (__fmal): Likewise.
 2016-01-15 05:23:20 -08:00
Anton Blanchard
0a1f1e78fb Eliminate redundant sign extensions in pow() 
When looking at the code generated for pow() on ppc64 I noticed quite
a few sign extensions. Making the array indices unsigned reduces the
number of sign extensions from 24 to 7.

Tested for powerpc64le and x86_64.
 2016-01-04 14:55:38 -02:00
Joseph Myers
f7a9f785e5 Update copyright dates with scripts/update-copyrights. 2016-01-04 16:05:18 +00:00
Siddhesh Poyarekar
b300455644 Consolidate sincos computation for 2.426265 < |x| < 105414350 
Like the previous change, exploit the fact that computation for sin
and cos is identical except that it is apart by a quadrant.  Also
remove csloww, csloww1 and csloww2 since they can easily be expressed
in terms of sloww, sloww1 and sloww2.
 2015-12-21 10:43:04 +05:30
Siddhesh Poyarekar
f7953c44d5 Consolidate sin and cos code for 105414350 <|x|< 281474976710656 
The sin and cos computation for this range of input is identical
except for a difference in quadrants by 1.  Exploit that fact and the
common argument reduction to reduce computations for sincos.
 2015-12-21 10:41:46 +05:30
Siddhesh Poyarekar
a045832deb Consolidate range reduction in sincos for x > 281474976710656 
Range reduction needs to be done only once for sin and cos, so copy
over all of the relevant functions (__sin, __cos, reduce_and_compute)
and consolidate common code.
 2015-12-21 10:40:32 +05:30
Chris Metcalf
e59c94fa0e math: add LDBL_CLASSIFY_COMPAT support 
If a platform does not define "long-double-fcts = yes" in its
Makefiles and it does define __NO_LONG_DOUBLE_MATH in its installed
headers, it will currently create exported symbols for __finitel,
__isinfl, and __isnanl that can't be reached from userspace by
correct use of the finite(), isinf(), or isnan() macros in <math.h>.

To avoid this situation, by default for such platforms we now no
longer export these symbols, thus causing appropriate link-time
errors.  However, for platforms that previously exported these
symbols, we continue to do so as compat symbols; this is enabled
by adding LDBL_CLASSIFY_COMPAT to math_private.h for the platform.

For tile, remove the now-unnecessary exports of those functions from
libc and libm.
 2015-12-03 13:00:46 -05:00
Joseph Myers
60f435bb0c Use hex float constants in sysdeps/ieee754/dbl-64/e_sqrt.c. 
Various sysdeps/ieee754/dbl-64 functions use double constants defined
using a union between a double and two ints, with separate big-endian
and little-endian definitions of the constants.

With modern C, this is unnecessary complication; hex float constants
(or __builtin_inf etc.) suffice to specify the exact value desired,
and so can avoid separate versions for each endianness.  Having this
complication also complicates cleanups such as removing slow paths
from these library functions, as they need to make sure to remove both
copies of variables that are no longer used after such a cleanup (and
in at least one case, proper removal of a slow path will also involve
removing slow-path-only values from the middle of an array - an array
with both big-endian and little-endian copies - and adjusting other
references to that array).

So it makes sense to clean up the code to define these constants using
hex floats and so eliminate the endianness conditional.  This patch
does so in the case of sqrt, where the two constants are such that it
makes sense just to put them directly in the code using them and
eliminate the names for them altogether.

Tested for arm (the code generated for sqrt does change, though not in
any significant way).

	* sysdeps/ieee754/dbl-64/e_sqrt.c: Do not include uroot.h.
	(__ieee754_sqrt): Use hex float constants instead of tm256.x and
	t512.x.
	* sysdeps/ieee754/dbl-64/uroot.h: Remove file.
 2015-12-01 01:01:36 +00:00
Siddhesh Poyarekar
463ac90dab Include s_sin.c in s_sincos.c 
Include the __sin and __cos functions as local static copies to allow
deper optimization of the functions.  This change shows an improvement
of about 17% in the min case and 12.5% in the mean case for the sincos
microbenchmark on x86_64.

	* sysdeps/ieee754/dbl-64/s_sin.c (__sin)[IN_SINCOS]: Mark function
	static and don't set or restore rounding.
	(__cos)[IN_SINCOS]: Likewise.
	* sysdeps/ieee754/dbl-64/s_sincos.c: Include s_sin.c.
	(__sincos): Set and restore rounding mode.  Remove check for infinite
	or NaN input.
 2015-11-17 21:11:31 +05:30
Siddhesh Poyarekar
b7665e5163 Remove redundant else clauses in s_sin.c 
Makes the code easier to read due to the reduced nesting.  The
generated binary is unchanged.
 2015-11-17 16:03:11 +05:30
Joseph Myers
444ec6b8d8 Fix dbl-64 remainder sign of zero result (bug 19201). 
For some large arguments, the dbl-64 implementation of remainder gives
zero results with the wrong sign, resulting from a subtraction that is
mathematically correct but does not guarantee that a zero result has
the sign of the first argument to remainder.  This patch adds an
appropriate check for this case, similar to other implementations of
remainder in the case of equality, and adds tests of remainder on
inputs already used to test remquo.

Tested for x86_64 and x86.

	[BZ #19201]
	* sysdeps/ieee754/dbl-64/e_remainder.c (__ieee754_remainder):
	Check for zero remainder in case of large exponents and ensure
	correct sign of result in that case.
	* math/libm-test.inc (remainder_test_data): Add more tests.
 2015-11-03 00:11:49 +00:00
Joseph Myers
1f4dafa3ea Use C11 *_TRUE_MIN macros where applicable. 
C11 defines standard <float.h> macros *_TRUE_MIN for the least
positive subnormal value of a type.  Now that we build with
-std=gnu11, we can use these macros in glibc.  This patch replaces
previous uses of the GCC predefines __*_DENORM_MIN__ (used in
<float.h> to define *_TRUE_MIN), as well as *_DENORM_MIN references in
comments.

Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).  Also tested for powerpc that
installed stripped shared libraries are unchanged by the patch.

	* math/libm-test.inc (min_subnorm_value): Use LDBL_TRUE_MIN,
	DBL_TRUE_MIN and FLT_TRUE_MIN instead of __LDBL_DENORM_MIN__,
	__DBL_DENORM_MIN__ and __FLT_DENORM_MIN__.
	* sysdeps/ieee754/dbl-64/s_fma.c (__fma): Refer to DBL_TRUE_MIN
	instead of DBL_DENORM_MIN in comment.
	* sysdeps/ieee754/ldbl-128/s_fmal.c (__fmal): Refer to
	LDBL_TRUE_MIN instead of LDBL_DENORM_MIN in comment.
	* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c: Include <float.h>.
	(__nextafterl): Use LDBL_TRUE_MIN instead of __LDBL_DENORM_MIN__.
	* sysdeps/ieee754/ldbl-96/s_fmal.c (__fmal): Refer to
	LDBL_TRUE_MIN instead of LDBL_DENORM_MIN in comment.
 2015-10-28 21:42:52 +00:00
Joseph Myers
f1d237df1e Remove GCC version conditionals on -Wmaybe-uninitialized pragmas. 
One common case of __GNUC_PREREQ (4, 7) conditionals is use of
diagnostic control pragmas for -Wmaybe-uninitialized, an option
introduced in GCC 4.7 where older GCC needed -Wuninitialized to be
controlled instead if the warning appeared with older GCC.  This patch
removes such conditionals.

(There remain several older uses of -Wno-uninitialized in makefiles
that still need to be converted to diagnostic control pragmas if the
issue is still present with current sources and supported GCC
versions, and it's likely that in most cases those pragmas also will
end up controlling -Wmaybe-uninitialized.)

Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch, except for libresolv
since res_send.c contains assertions whose line numbers are changed by
the patch).

	* resolv/res_send.c (send_vc) [__GNUC_PREREQ (4, 7)]: Make code
	unconditional.
	* soft-fp/fmadf4.c [__GNUC_PREREQ (4, 7)]: Likewise.
	[!__GNUC_PREREQ (4, 7)]: Remove conditional code.
	* soft-fp/fmasf4.c [__GNUC_PREREQ (4, 7)]: Make code
	unconditional.
	[!__GNUC_PREREQ (4, 7)]: Remove conditional code.
	* soft-fp/fmatf4.c [__GNUC_PREREQ (4, 7)]: Make code
	unconditional.
	[!__GNUC_PREREQ (4, 7)]: Remove conditional code.
	* stdlib/setenv.c
	[((__GNUC__ << 16) + __GNUC_MINOR__) >= ((4 << 16) + 7)]: Make
	code unconditional.
	[!(((__GNUC__ << 16) + __GNUC_MINOR__) >= ((4 << 16) + 7))]:
	Remove conditional code.
	* sysdeps/ieee754/dbl-64/e_lgamma_r.c
	(__ieee754_lgamma_r) [__GNUC_PREREQ (4, 7)]: Make code
	unconditional.
	(__ieee754_lgamma_r) [!__GNUC_PREREQ (4, 7)]: Remove conditional
	code.
	* sysdeps/ieee754/flt-32/e_lgammaf_r.c
	(__ieee754_lgammaf_r) [__GNUC_PREREQ (4, 7)]: Make code
	unconditional.
	(__ieee754_lgammaf_r) [!__GNUC_PREREQ (4, 7)]: Remove conditional
	code.
	* sysdeps/ieee754/ldbl-128/k_tanl.c
	(__kernel_tanl) [__GNUC_PREREQ (4, 7)]: Make code unconditional.
	(__kernel_tanl) [!__GNUC_PREREQ (4, 7)]: Remove conditional code.
	* sysdeps/ieee754/ldbl-128ibm/k_tanl.c
	(__kernel_tanl) [__GNUC_PREREQ (4, 7)]: Make code unconditional.
	(__kernel_tanl) [!__GNUC_PREREQ (4, 7)]: Remove conditional code.
	* sysdeps/ieee754/ldbl-96/e_lgammal_r.c
	(__ieee754_lgammal_r) [__GNUC_PREREQ (4, 7)]: Make code
	unconditional.
	(__ieee754_lgammal_r) [!__GNUC_PREREQ (4, 7)]: Remove conditional
	code.
	* sysdeps/ieee754/ldbl-96/k_tanl.c
	(__kernel_tanl) [__GNUC_PREREQ (4, 7)]: Make code unconditional.
	(__kernel_tanl) [!__GNUC_PREREQ (4, 7)]: Remove conditional code.
 2015-10-27 23:42:20 +00:00
Joseph Myers
c643db8792 Fix j1, jn missing errno setting on underflow (bug 18611). 
j1 and jn can underflow for small arguments, but fail to set errno
when underflowing to 0.  This patch fixes them to set errno in that
case.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #18611]
	* sysdeps/ieee754/dbl-64/e_j1.c (__ieee754_j1): Set errno and
	avoid excess range and precision on underflow.
	* sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise.
	* sysdeps/ieee754/flt-32/e_j1f.c (__ieee754_j1f): Likewise.
	* sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise.
	* sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_j1l): Set errno on
	underflow.
	* sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_j1l.c (__ieee754_j1l): Likewise.
	* sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise.
	* math/auto-libm-test-in: Do not allow missing errno setting for
	tests of j1 and jn.
	* math/auto-libm-test-out: Regenerated.
 2015-10-23 21:37:33 +00:00
Joseph Myers
06d97e5e61 Fix lrint, llrint, lround, llround missing exceptions for MIPS (bug 16399). 
For 32-bit MIPS and some other systems, various of the lrint, llrint,
lround, llround functions can be missing exceptions on overflow
because casts do not (in current GCC) result in the proper
exceptions.  In the MIPS case there are two problems here: MIPS I code
generation uses an assembler macro that doesn't raise exceptions,
while the libgcc conversions of floating-point values to long long
also do not raise "invalid" on all overflow cases (and can raise
spurious "inexact").

This patch adds support in the generic code (only the functions for
which this problem has actually been seen) for forcing the "invalid"
exception in the problem cases, and enables that support for the
affected MIPS cases.

Tested for MIPS; also tested for x86_64 and x86 that installed
stripped shared libraries are unchanged by this patch.

	[BZ #16399]
	* sysdeps/generic/fix-fp-int-convert-overflow.h: New file.
	* sysdeps/ieee754/dbl-64/s_llrint.c: Include <fenv.h>, <limits.h>
	and <fix-fp-int-convert-overflow.h>.
	(__llrint) [FE_INVALID]: Force FE_INVALID exception as needed if
	FIX_DBL_LLONG_CONVERT_OVERFLOW.
	* sysdeps/ieee754/dbl-64/s_llround.c: Include <fenv.h>, <limits.h>
	and <fix-fp-int-convert-overflow.h>.
	(__llround) [FE_INVALID]: Force FE_INVALID exception as needed if
	FIX_DBL_LLONG_CONVERT_OVERFLOW.
	* sysdeps/ieee754/dbl-64/s_lrint.c: Include
	<fix-fp-int-convert-overflow.h>.
	(__lrint) [FE_INVALID]: Force FE_INVALID exception as needed if
	FIX_DBL_LLONG_CONVERT_OVERFLOW.
	* sysdeps/ieee754/dbl-64/s_lround.c: Include
	<fix-fp-int-convert-overflow.h>.
	(__lround) [FE_INVALID]: Force FE_INVALID exception as needed if
	FIX_DBL_LLONG_CONVERT_OVERFLOW.
	* sysdeps/ieee754/flt-32/s_llrintf.c: Include <fenv.h>, <limits.h>
	and <fix-fp-int-convert-overflow.h>.
	(__llrintf) [FE_INVALID]: Force FE_INVALID exception as needed if
	FIX_DBL_LLONG_CONVERT_OVERFLOW.
	* sysdeps/ieee754/flt-32/s_llroundf.c: Include <fenv.h>,
	<limits.h> and <fix-fp-int-convert-overflow.h>.
	(__llroundf) [FE_INVALID]: Force FE_INVALID exception as needed if
	FIX_DBL_LLONG_CONVERT_OVERFLOW.
	* sysdeps/ieee754/flt-32/s_lrintf.c: Include <fenv.h>, <limits.h>
	and <fix-fp-int-convert-overflow.h>.
	(__lrintf) [FE_INVALID]: Force FE_INVALID exception as needed if
	FIX_DBL_LLONG_CONVERT_OVERFLOW.
	* sysdeps/ieee754/flt-32/s_lroundf.c: Include <fenv.h>, <limits.h>
	and <fix-fp-int-convert-overflow.h>.
	(__lroundf) [FE_INVALID]: Force FE_INVALID exception as needed if
	FIX_DBL_LLONG_CONVERT_OVERFLOW.
	* sysdeps/mips/mips32/fpu/fix-fp-int-convert-overflow.h: New file.
 2015-10-09 21:02:19 +00:00
Joseph Myers
0e069029a8 Fix dbl-64 lrint for 64-bit long (bug 19095). 
The dbl-64 implementation of lrint produces incorrect results for some
arguments with 64-bit long because a 32-bit (unsigned) low part of the
mantissa is shifted left, losing high bits in the process.  This patch
fixes this by casting to long int before shifting, as in lround (as
this case only applies for 64-bit long, there are no issues with
sign-extension).

Tested for mips64 (n64).

	[BZ #19095]
	* sysdeps/ieee754/dbl-64/s_lrint.c (__lrint): Cast low part of
	mantissa to long int before shifting left.
 2015-10-09 00:32:14 +00:00
Joseph Myers
d0d286d32d Fix lrint, llrint missing exceptions close to overflow threshold (bug 19094). 
The dbl-64, ldbl-96 and ldbl-128 implementations of lrint and llrint
fail to produce "invalid" exceptions in cases where the rounded result
overflows the target type, but truncating the floating-point argument
to the next integer towards zero does not overflow it (so in
particular casts do not produce such exceptions).  (This issue cannot
arise for float, or for double with 64-bit target type, or for ldbl-96
with 64-bit target type and negative arguments, because of
insufficient precision in the floating-point type for arguments with
the relevant property to exist.  It also obviously cannot arise in
FE_TOWARDZERO mode.)

This patch fixes these problems by inserting checks for the special
cases that can occur in each implementation, and explicitly raising
FE_INVALID (and avoiding the cast if it might raise spurious
FE_INEXACT, while raising FE_INEXACT explicitly in the cases where it
is needed; unlike lround and llround, FE_INEXACT is required, not
optional, for these functions for a within-range inexact result).

The fixes are conditional on FE_INVALID or FE_INEXACT being defined.
If any future architecture supports one but not both of those
exceptions, the code will fail to compile and need fixing to handle
that case (this seemed better than conditioning on both macros being
defined, resulting in code that would compile but quietly miss
exceptions on such a system).

Tested for x86_64, x86 and mips64.  Tested the ldbl-96 changes (only
relevant for ia64, it appears) on x86_64 by removing the x86_64
versions of lrintl / llrintl.

	[BZ #19094]
	* sysdeps/ieee754/dbl-64/s_lrint.c: Include <fenv.h> and
	<limits.h>.
	(__lrint) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception
	when result overflows but exception would not result from cast.
	* sysdeps/ieee754/ldbl-128/s_llrintl.c: Include <fenv.h> and
	<limits.h>.
	(__llrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception
	when result overflows but exception would not result from cast.
	* sysdeps/ieee754/ldbl-128/s_lrintl.c: Include <fenv.h> and
	<limits.h>.
	(__lrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception
	when result overflows but exception would not result from cast.
	* sysdeps/ieee754/ldbl-96/s_llrintl.c: Include <fenv.h> and
	<limits.h>.
	(__llrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception
	when result overflows but exception would not result from cast.
	* sysdeps/ieee754/ldbl-96/s_lrintl.c: Include <fenv.h> and
	<limits.h>.
	(__lrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception
	when result overflows but exception would not result from cast.
	* math/libm-test.inc (lrint_test_data): Add more tests.
	(llrint_test_data): Likewise.
 2015-10-08 22:17:45 +00:00
Joseph Myers
8afdb7ac1e Fix lround, llround missing exceptions close to overflow threshold (bug 19088). 
The dbl-64, ldbl-96 and ldbl-128 implementations of lround and llround
fail to produce "invalid" exceptions in cases where the rounded result
overflows the target type, but truncating the floating-point argument
to the next integer towards zero does not overflow it (so in
particular casts do not produce such exceptions).  (This issue cannot
arise for float, or for double with 64-bit target type, or for ldbl-96
with 64-bit target type and negative arguments, because of
insufficient precision in the floating-point type for arguments with
the relevant property to exist.)

This patch fixes these problems by inserting checks for the special
cases that can occur in each implementation, and explicitly raising
FE_INVALID (and avoiding the cast if it might raise spurious
FE_INEXACT).

Tested for x86_64, x86 and mips64.

	[BZ #19088]
	* sysdeps/ieee754/dbl-64/s_lround.c: Include <fenv.h> and
	<limits.h>.
	(__lround) [FE_INVALID]: Force FE_INVALID exception when result
	overflows but exception would not result from cast.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_lround.c: Include <fenv.h>
	and <limits.h>.
	(__lround) [FE_INVALID]: Force FE_INVALID exception when result
	overflows but exception would not result from cast.
	* sysdeps/ieee754/ldbl-128/s_llroundl.c: Include <fenv.h> and
	<limits.h>.
	(__llroundl) [FE_INVALID]: Force FE_INVALID exception when result
	overflows but exception would not result from cast.
	* sysdeps/ieee754/ldbl-128/s_lroundl.c: Include <fenv.h> and
	<limits.h>.
	(__lroundl) [FE_INVALID]: Force FE_INVALID exception when result
	overflows but exception would not result from cast.
	* sysdeps/ieee754/ldbl-96/s_llroundl.c: Include <fenv.h> and
	<limits.h>.
	(__llroundl) [FE_INVALID]: Force FE_INVALID exception when result
	overflows but exception would not result from cast.
	* sysdeps/ieee754/ldbl-96/s_lroundl.c: Include <fenv.h> and
	<limits.h>.
	(__lroundl) [FE_INVALID]: Force FE_INVALID exception when result
	overflows but exception would not result from cast.
	* math/libm-test.inc (lround_test_data): Add more tests.
	(llround_test_data): Likewise.
 2015-10-07 23:45:29 +00:00
Joseph Myers
e88c14d009 Use dbl-64/wordsize-64 for MIPS64. 
This patch enables use of sysdeps/ieee754/dbl-64/wordsize-64 for
MIPS64 (both n64 and n32), removing a #error in one case now that case
has been tested and found to work.

Tested for mips64 (n64 and n32).

	* sysdeps/mips/mips64/Implies: Use ieee754/dbl-64/wordsize-64.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_issignaling.c
	(__issignaling) [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Remove #error.
 2015-10-07 00:43:08 +00:00
Joseph Myers
b75bc69cdf Don't use dbl-64/wordsize-64 lround based on llround for ILP32 (bug 19079). 
The implementation of lround in dbl-64/wordsize-64 as an alias or
wrapper for llround is always incorrect when long is not 64-bit,
because it misses required exceptions in overflow cases, as shown by
my recently added tests.  This patch removes that alias / wrapper in
the non-LP64 case, together with the REGISTER_CAST_INT32_TO_INT64
macro, restoring the previous version of lround for dbl-64/wordsize-64
(newly conditioned on !_LP64).

Tested for x86_64, and for mips64 with use of dbl-64/wordsize-64
enabled.

	[BZ #19079]
	* sysdeps/ieee754/dbl-64/wordsize-64/s_lround.c: Restore previous
	file, conditioned on [!_LP64].
	* sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c
	[!_LP64] (__lround): Do not define as function or alias.
	[!_LP64] (lround): Likewise.
	[!_LP64] (__lroundl): Likewise.
	[!_LP64] (lroundl): Likewise.
	* sysdeps/tile/sysdep.h (REGISTER_CAST_INT32_TO_INT64): Remove
	macro.
	* sysdeps/x86_64/x32/sysdep.h (REGISTER_CAST_INT32_TO_INT64):
	Likewise.
 2015-10-07 00:40:12 +00:00
Joseph Myers
bc3753638a Work around powerpc32 integer 0 converting to -0 (bug 887, bug 19049, bug 19050). 
On powerpc32 hard-float, older processors (ones where fcfid is not
available for 32-bit code), GCC generates conversions from integers to
floating point that wrongly convert integer 0 to -0 instead of +0 in
FE_DOWNWARD mode.  This in turn results in logb and a few other
functions wrongly returning -0 when they should return +0.

This patch works around this issue in glibc as I proposed in
<https://sourceware.org/ml/libc-alpha/2015-09/msg00728.html>, so that
the affected functions can be correct and the affected tests pass in
the absence of a GCC fix for this longstanding issue (GCC bug 67771 -
if fixed, of course we can put in GCC version conditionals, and
eventually phase out the workarounds).  A new macro
FIX_INT_FP_CONVERT_ZERO is added in a new sysdeps header
fix-int-fp-convert-zero.h, and the powerpc32/fpu version of that
header defines the macro based on the results of a configure test for
whether such conversions use the fcfid instruction.

Tested for x86_64 (that installed stripped shared libraries are
unchanged by the patch) and powerpc (that HAVE_PPC_FCFID comes out to
0 as expected and that the relevant tests are fixed).  Also tested a
build with GCC configured for -mcpu=power4 and verified that
HAVE_PPC_FCFID comes out to 1 in that case.

There are still some other issues to fix to get test-float and
test-double passing cleanly for older powerpc32 processors (apart from
the need for an ulps regeneration for powerpc).  (test-ldouble will be
harder to get passing cleanly, but with a combination of selected
fixes to ldbl-128ibm code that don't involve significant performance
issues, allowing spurious underflow and inexact exceptions for that
format, and lots of XFAILing for the default case of unpatched libgcc,
it should be doable.)

	[BZ #887]
	[BZ #19049]
	[BZ #19050]
	* sysdeps/generic/fix-int-fp-convert-zero.h: New file.
	* sysdeps/ieee754/dbl-64/e_log10.c: Include
	<fix-int-fp-convert-zero.h>.
	(__ieee754_log10): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
	* sysdeps/ieee754/dbl-64/e_log2.c: Include
	<fix-int-fp-convert-zero.h>.
	(__ieee754_log2): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
	* sysdeps/ieee754/dbl-64/s_erf.c: Include
	<fix-int-fp-convert-zero.h>.
	(__erfc): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
	* sysdeps/ieee754/dbl-64/s_logb.c: Include
	<fix-int-fp-convert-zero.h>.
	(__logb): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
	* sysdeps/ieee754/flt-32/e_log10f.c: Include
	<fix-int-fp-convert-zero.h>.
	(__ieee754_log10f): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
	* sysdeps/ieee754/flt-32/e_log2f.c: Include
	<fix-int-fp-convert-zero.h>.
	(__ieee754_log2f): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
	* sysdeps/ieee754/flt-32/s_erff.c: Include
	<fix-int-fp-convert-zero.h>.
	(__erfcf): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
	* sysdeps/ieee754/flt-32/s_logbf.c: Include
	<fix-int-fp-convert-zero.h>.
	(__logbf): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
	* sysdeps/ieee754/ldbl-128ibm/s_erfl.c: Include
	<fix-int-fp-convert-zero.h>.
	(__erfcl): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
	* sysdeps/ieee754/ldbl-128ibm/s_logbl.c: Include
	<fix-int-fp-convert-zero.h>.
	(__logbl): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
	* sysdeps/powerpc/powerpc32/fpu/configure.ac: New file.
	* sysdeps/powerpc/powerpc32/fpu/configure: New generated file.
	* sysdeps/powerpc/powerpc32/fpu/fix-int-fp-convert-zero.h: New
	file.
	* config.h.in [_LIBC] (HAVE_PPC_FCFID): New macro.
 2015-10-05 17:46:50 +00:00
Joseph Myers
a5721ebc68 Fix clog, clog10 inaccuracy (bug 19016). 
For arguments with X^2 + Y^2 close to 1, clog and clog10 avoid large
errors from log(hypot) by computing X^2 + Y^2 - 1 in a way that avoids
cancellation error and then using log1p.

However, the thresholds for using that approach still result in log
being used on argument as large as sqrt(13/16) > 0.9, leading to
significant errors, in some cases above the 9ulp maximum allowed in
glibc libm.  This patch arranges for the approach using log1p to be
used in any cases where |X|, |Y| < 1 and X^2 + Y^2 >= 0.5 (with the
existing allowance for cases where one of X and Y is very small),
adjusting the __x2y2m1 functions to work with the wider range of
inputs.  This way, log only gets used on arguments below sqrt(1/2) (or
substantially above 1), where the error involved is much less.

Tested for x86_64, x86, mips64 and powerpc.  For the ulps regeneration
I removed the existing clog and clog10 ulps before regenerating to
allow any reduced ulps to appear.  Tests added include those found by
random test generation to produce large ulps either before or after
the patch, and some found by trying inputs close to the (0.75, 0.5)
threshold where the potential errors from using log are largest.

	[BZ #19016]
	* sysdeps/generic/math_private.h (__x2y2m1f): Update comment to
	allow more cases with X^2 + Y^2 >= 0.5.
	* sysdeps/ieee754/dbl-64/x2y2m1.c (__x2y2m1): Likewise.  Add -1 as
	normal element in sum instead of special-casing based on values of
	arguments.
	* sysdeps/ieee754/dbl-64/x2y2m1f.c (__x2y2m1f): Update comment.
	* sysdeps/ieee754/ldbl-128/x2y2m1l.c (__x2y2m1l): Likewise.  Add
	-1 as normal element in sum instead of special-casing based on
	values of arguments.
	* sysdeps/ieee754/ldbl-128ibm/x2y2m1l.c (__x2y2m1l): Likewise.
	* sysdeps/ieee754/ldbl-96/x2y2m1.c [FLT_EVAL_METHOD != 0]
	(__x2y2m1): Update comment.
	* sysdeps/ieee754/ldbl-96/x2y2m1l.c (__x2y2m1l): Likewise.  Add -1
	as normal element in sum instead of special-casing based on values
	of arguments.
	* math/s_clog.c (__clog): Handle more cases using log1p without
	hypot.
	* math/s_clog10.c (__clog10): Likewise.
	* math/s_clog10f.c (__clog10f): Likewise.
	* math/s_clog10l.c (__clog10l): Likewise.
	* math/s_clogf.c (__clogf): Likewise.
	* math/s_clogl.c (__clogl): Likewise.
	* math/auto-libm-test-in: Add more tests of clog and clog10.
	* math/auto-libm-test-out: Regenerated.
	* sysdeps/i386/fpu/libm-test-ulps: Update.
	* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
 2015-09-28 22:11:22 +00:00
Joseph Myers
6ace393821 Fix pow missing underflows (bug 18825). 
Similar to various other bugs in this area, pow functions can fail to
raise the underflow exception when the result is tiny and inexact but
one or more low bits of the intermediate result that is scaled down
(or, in the i386 case, converted from a wider evaluation format) are
zero.  This patch forces the exception in a similar way to previous
fixes, thereby concluding the fixes for known bugs with missing
underflow exceptions currently filed in Bugzilla.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #18825]
	* sysdeps/i386/fpu/i386-math-asm.h (FLT_NARROW_EVAL_UFLOW_NONNAN):
	New macro.
	(DBL_NARROW_EVAL_UFLOW_NONNAN): Likewise.
	(LDBL_CHECK_FORCE_UFLOW_NONNAN): Likewise.
	* sysdeps/i386/fpu/e_pow.S: Use DEFINE_DBL_MIN.
	(__ieee754_pow): Use DBL_NARROW_EVAL_UFLOW_NONNAN instead of
	DBL_NARROW_EVAL, reloading the PIC register as needed.
	* sysdeps/i386/fpu/e_powf.S: Use DEFINE_FLT_MIN.
	(__ieee754_powf): Use FLT_NARROW_EVAL_UFLOW_NONNAN instead of
	FLT_NARROW_EVAL.  Use separate return path for case when first
	argument is NaN.
	* sysdeps/i386/fpu/e_powl.S: Include <i386-math-asm.h>.  Use
	DEFINE_LDBL_MIN.
	(__ieee754_powl): Use LDBL_CHECK_FORCE_UFLOW_NONNAN, reloading the
	PIC register.
	* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Use
	math_check_force_underflow_nonneg.
	* sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Force
	underflow for subnormal result.
	* sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Use
	math_check_force_underflow_nonneg.
	* sysdeps/x86/fpu/powl_helper.c (__powl_helper): Use
	math_check_force_underflow.
	* sysdeps/x86_64/fpu/x86_64-math-asm.h
	(LDBL_CHECK_FORCE_UFLOW_NONNAN): New macro.
	* sysdeps/x86_64/fpu/e_powl.S: Include <x86_64-math-asm.h>.  Use
	DEFINE_LDBL_MIN.
	(__ieee754_powl): Use LDBL_CHECK_FORCE_UFLOW_NONNAN.
	* math/auto-libm-test-in: Add more tests of pow.
	* math/auto-libm-test-out: Regenerated.
 2015-09-25 22:29:10 +00:00
Joseph Myers
f6987f5aa4 Fix hypot missing underflows (bug 18803). 
Similar to various other bugs in this area, hypot functions can fail
to raise the underflow exception when the result is tiny and inexact
but one or more low bits of the intermediate result that is scaled
down (or, in the i386 case, converted from a wider evaluation format)
are zero.  This patch forces the exception in a similar way to
previous fixes.

Note that this issue cannot arise for implementations of hypotf using
double (or wider) for intermediate evaluation (if hypotf should
underflow, that means the double square root is being computed of some
number of the form N*2^-298, for 0 < N < 2^46, which is exactly
represented as a double, and whatever the rounding mode such a square
root cannot have a mantissa with all zeroes after the initial 23
bits).  Thus no changes are made to hypotf implementations in this
patch, only to hypot and hypotl.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #18803]
	* sysdeps/i386/fpu/e_hypot.S: Use DEFINE_DBL_MIN.
	(MO): New macro.
	(__ieee754_hypot) [PIC]: Load PIC register.
	(__ieee754_hypot): Use DBL_NARROW_EVAL_UFLOW_NONNEG instead of
	DBL_NARROW_EVAL.
	* sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Use
	math_check_force_underflow_nonneg in case where result might be
	tiny.
	* sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl):
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_hypotl.c (__ieee754_hypotl):
	Likewise.
	* sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise.
	* sysdeps/powerpc/fpu/e_hypot.c (__ieee754_hypot): Likewise.
	* math/auto-libm-test-in: Add more tests of hypot.
	* math/auto-libm-test-out: Regenerated.
 2015-09-24 23:43:57 +00:00
Joseph Myers
d96164c330 Refactor code forcing underflow exceptions. 
Various floating-point functions have code to force underflow
exceptions if a tiny result was computed in a way that might not have
resulted in such exceptions even though the result is inexact.  This
typically uses math_force_eval to ensure that the underflowing
expression is evaluated, but sometimes uses volatile.

This patch refactors such code to use three new macros
math_check_force_underflow, math_check_force_underflow_nonneg and
math_check_force_underflow_complex (which in turn use
math_force_eval).  In the limited number of cases not suited to a
simple conversion to these macros, existing uses of volatile are
changed to use math_force_eval instead.  The converted code does not
always execute exactly the same sequence of operations as the original
code, but the overall effects should be the same.

Tested for x86_64, x86, mips64 and powerpc.

	* sysdeps/generic/math_private.h (fabs_tg): New macro.
	(min_of_type): Likewise.
	(math_check_force_underflow): Likewise.
	(math_check_force_underflow_nonneg): Likewise.
	(math_check_force_underflow_complex): Likewise.
	* math/e_exp2l.c (__ieee754_exp2l): Use
	math_check_force_underflow_nonneg.
	* math/k_casinh.c (__kernel_casinh): Likewise.
	* math/k_casinhf.c (__kernel_casinhf): Likewise.
	* math/k_casinhl.c (__kernel_casinhl): Likewise.
	* math/s_catan.c (__catan): Use
	math_check_force_underflow_complex.
	* math/s_catanf.c (__catanf): Likewise.
	* math/s_catanh.c (__catanh): Likewise.
	* math/s_catanhf.c (__catanhf): Likewise.
	* math/s_catanhl.c (__catanhl): Likewise.
	* math/s_catanl.c (__catanl): Likewise.
	* math/s_ccosh.c (__ccosh): Likewise.
	* math/s_ccoshf.c (__ccoshf): Likewise.
	* math/s_ccoshl.c (__ccoshl): Likewise.
	* math/s_cexp.c (__cexp): Likewise.
	* math/s_cexpf.c (__cexpf): Likewise.
	* math/s_cexpl.c (__cexpl): Likewise.
	* math/s_clog.c (__clog): Use math_check_force_underflow_nonneg.
	* math/s_clog10.c (__clog10): Likewise.
	* math/s_clog10f.c (__clog10f): Likewise.
	* math/s_clog10l.c (__clog10l): Likewise.
	* math/s_clogf.c (__clogf): Likewise.
	* math/s_clogl.c (__clogl): Likewise.
	* math/s_csin.c (__csin): Use math_check_force_underflow_complex.
	* math/s_csinf.c (__csinf): Likewise.
	* math/s_csinh.c (__csinh): Likewise.
	* math/s_csinhf.c (__csinhf): Likewise.
	* math/s_csinhl.c (__csinhl): Likewise.
	* math/s_csinl.c (__csinl): Likewise.
	* math/s_csqrt.c (__csqrt): Use math_check_force_underflow.
	* math/s_csqrtf.c (__csqrtf): Likewise.
	* math/s_csqrtl.c (__csqrtl): Likewise.
	* math/s_ctan.c (__ctan): Use math_check_force_underflow_complex.
	* math/s_ctanf.c (__ctanf): Likewise.
	* math/s_ctanh.c (__ctanh): Likewise.
	* math/s_ctanhf.c (__ctanhf): Likewise.
	* math/s_ctanhl.c (__ctanhl): Likewise.
	* math/s_ctanl.c (__ctanl): Likewise.
	* stdlib/strtod_l.c (round_and_return): Use math_force_eval
	instead of volatile.
	* sysdeps/ieee754/dbl-64/e_asin.c (__ieee754_asin): Use
	math_check_force_underflow.
	* sysdeps/ieee754/dbl-64/e_atanh.c (__ieee754_atanh): Likewise.
	* sysdeps/ieee754/dbl-64/e_exp.c (__ieee754_exp): Do not use
	volatile when forcing underflow.
	* sysdeps/ieee754/dbl-64/e_exp2.c (__ieee754_exp2): Use
	math_check_force_underflow_nonneg.
	* sysdeps/ieee754/dbl-64/e_gamma_r.c (__ieee754_gamma_r):
	Likewise.
	* sysdeps/ieee754/dbl-64/e_j1.c (__ieee754_j1): Use
	math_check_force_underflow.
	* sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise.
	* sysdeps/ieee754/dbl-64/e_sinh.c (__ieee754_sinh): Likewise.
	* sysdeps/ieee754/dbl-64/s_asinh.c (__asinh): Likewise.
	* sysdeps/ieee754/dbl-64/s_atan.c (atan): Use
	math_check_force_underflow_nonneg.
	* sysdeps/ieee754/dbl-64/s_erf.c (__erf): Use
	math_check_force_underflow.
	* sysdeps/ieee754/dbl-64/s_expm1.c (__expm1): Likewise.
	* sysdeps/ieee754/dbl-64/s_fma.c (__fma): Use math_force_eval
	instead of volatile.
	* sysdeps/ieee754/dbl-64/s_log1p.c (__log1p): Use
	math_check_force_underflow.
	* sysdeps/ieee754/dbl-64/s_sin.c (__sin): Likewise.
	* sysdeps/ieee754/dbl-64/s_tan.c (tan): Use
	math_check_force_underflow_nonneg.
	* sysdeps/ieee754/dbl-64/s_tanh.c (__tanh): Use
	math_check_force_underflow.
	* sysdeps/ieee754/flt-32/e_asinf.c (__ieee754_asinf): Likewise.
	* sysdeps/ieee754/flt-32/e_atanhf.c (__ieee754_atanhf): Likewise.
	* sysdeps/ieee754/flt-32/e_exp2f.c (__ieee754_exp2f): Use
	math_check_force_underflow_nonneg.
	* sysdeps/ieee754/flt-32/e_gammaf_r.c (__ieee754_gammaf_r):
	Likewise.
	* sysdeps/ieee754/flt-32/e_j1f.c (__ieee754_j1f): Use
	math_check_force_underflow.
	* sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise.
	* sysdeps/ieee754/flt-32/e_sinhf.c (__ieee754_sinhf): Likewise.
	* sysdeps/ieee754/flt-32/k_sinf.c (__kernel_sinf): Likewise.
	* sysdeps/ieee754/flt-32/k_tanf.c (__kernel_tanf): Likewise.
	* sysdeps/ieee754/flt-32/s_asinhf.c (__asinhf): Likewise.
	* sysdeps/ieee754/flt-32/s_atanf.c (__atanf): Likewise.
	* sysdeps/ieee754/flt-32/s_erff.c (__erff): Likewise.
	* sysdeps/ieee754/flt-32/s_expm1f.c (__expm1f): Likewise.
	* sysdeps/ieee754/flt-32/s_log1pf.c (__log1pf): Likewise.
	* sysdeps/ieee754/flt-32/s_tanhf.c (__tanhf): Likewise.
	* sysdeps/ieee754/ldbl-128/e_asinl.c (__ieee754_asinl): Likewise.
	* sysdeps/ieee754/ldbl-128/e_atanhl.c (__ieee754_atanhl):
	Likewise.
	* sysdeps/ieee754/ldbl-128/e_expl.c (__ieee754_expl): Use
	math_check_force_underflow_nonneg.
	* sysdeps/ieee754/ldbl-128/e_gammal_r.c (__ieee754_gammal_r):
	Likewise.
	* sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_j1l): Use
	math_check_force_underflow.
	* sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise.
	* sysdeps/ieee754/ldbl-128/e_sinhl.c (__ieee754_sinhl): Likewise.
	* sysdeps/ieee754/ldbl-128/k_sincosl.c (__kernel_sincosl):
	Likewise.
	* sysdeps/ieee754/ldbl-128/k_sinl.c (__kernel_sinl): Likewise.
	* sysdeps/ieee754/ldbl-128/k_tanl.c (__kernel_tanl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_asinhl.c (__asinhl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_atanl.c (__atanl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_erfl.c (__erfl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_expm1l.c (__expm1l): Likewise.
	* sysdeps/ieee754/ldbl-128/s_fmal.c (__fmal): Use math_force_eval
	instead of volatile.
	* sysdeps/ieee754/ldbl-128/s_log1pl.c (__log1pl): Use
	math_check_force_underflow.
	* sysdeps/ieee754/ldbl-128/s_tanhl.c (__tanhl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_asinl.c (__ieee754_asinl): Use
	math_check_force_underflow.
	* sysdeps/ieee754/ldbl-128ibm/e_atanhl.c (__ieee754_atanhl):
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (__ieee754_gammal_r):
	Use math_check_force_underflow_nonneg.
	* sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Use
	math_check_force_underflow.
	* sysdeps/ieee754/ldbl-128ibm/e_sinhl.c (__ieee754_sinhl):
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/k_sincosl.c (__kernel_sincosl):
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/k_sinl.c (__kernel_sinl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/k_tanl.c (__kernel_tanl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_asinhl.c (__asinhl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_atanl.c (__atanl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_erfl.c (__erfl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_tanhl.c (__tanhl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_asinl.c (__ieee754_asinl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_atanhl.c (__ieee754_atanhl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_gammal_r.c (__ieee754_gammal_r): Use
	math_check_force_underflow_nonneg.
	* sysdeps/ieee754/ldbl-96/e_j1l.c (__ieee754_j1l): Use
	math_check_force_underflow.
	* sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_sinhl.c (__ieee754_sinhl): Likewise.
	* sysdeps/ieee754/ldbl-96/k_sinl.c (__kernel_sinl): Likewise.
	* sysdeps/ieee754/ldbl-96/k_tanl.c (__kernel_tanl): Use
	math_check_force_underflow_nonneg.
	* sysdeps/ieee754/ldbl-96/s_asinhl.c (__asinhl): Use
	math_check_force_underflow.
	* sysdeps/ieee754/ldbl-96/s_erfl.c (__erfl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_fmal.c (__fmal): Use math_force_eval
	instead of volatile.
	* sysdeps/ieee754/ldbl-96/s_tanhl.c (__tanhl): Use
	math_check_force_underflow.
 2015-09-23 22:42:30 +00:00
Joseph Myers
54142c44e9 Use math_narrow_eval more consistently. 
Where glibc code needs to avoid excess range and precision in
floating-point arithmetic, code variously uses either asms or volatile
to force the results of that arithmetic to memory; mostly this is
conditional on FLT_EVAL_METHOD, but in the case of lrint / llrint
functions some use of volatile is unconditional (and is present
unnecessarily in versions for long double).  This patch make such code
use the recently-added math_narrow_eval macro consistently, removing
the unnecessary uses of volatile in long double lrint / llrint
implementations completely.

Tested for x86_64, x86, mips64 and powerpc.

	* math/s_nexttowardf.c (__nexttowardf): Use math_narrow_eval.
	* stdlib/strtod_l.c: Include <math_private.h>.
	(overflow_value): Use math_narrow_eval.
	(underflow_value): Likewise.
	* sysdeps/i386/fpu/s_nexttoward.c (__nexttoward): Likewise.
	* sysdeps/i386/fpu/s_nexttowardf.c (__nexttowardf): Likewise.
	* sysdeps/ieee754/dbl-64/e_gamma_r.c (gamma_positive): Likewise.
	(__ieee754_gamma_r): Likewise.
	* sysdeps/ieee754/dbl-64/gamma_productf.c (__gamma_productf):
	Likewise.
	* sysdeps/ieee754/dbl-64/k_rem_pio2.c (__kernel_rem_pio2):
	Likewise.
	* sysdeps/ieee754/dbl-64/lgamma_neg.c (__lgamma_neg): Likewise.
	* sysdeps/ieee754/dbl-64/s_erf.c (__erfc): Likewise.
	* sysdeps/ieee754/dbl-64/s_llrint.c (__llrint): Likewise.
	* sysdeps/ieee754/dbl-64/s_lrint.c (__lrint): Likewise.
	* sysdeps/ieee754/flt-32/e_gammaf_r.c (gammaf_positive): Likewise.
	(__ieee754_gammaf_r): Likewise.
	* sysdeps/ieee754/flt-32/k_rem_pio2f.c (__kernel_rem_pio2f):
	Likewise.
	* sysdeps/ieee754/flt-32/lgamma_negf.c (__lgamma_negf): Likewise.
	* sysdeps/ieee754/flt-32/s_erff.c (__erfcf): Likewise.
	* sysdeps/ieee754/flt-32/s_llrintf.c (__llrintf): Likewise.
	* sysdeps/ieee754/flt-32/s_lrintf.c (__lrintf): Likewise.
	* sysdeps/ieee754/ldbl-128/s_llrintl.c (__llrintl): Do not use
	volatile.
	* sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_nexttoward.c (__nexttoward): Use
	math_narrow_eval.
	* sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c (__nexttoward):
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c (__nexttowardf):
	Likewise.
	* sysdeps/ieee754/ldbl-96/gamma_product.c (__gamma_product):
	Likewise.
	* sysdeps/ieee754/ldbl-96/s_llrintl.c (__llrintl): Do not use
	volatile.
	* sysdeps/ieee754/ldbl-96/s_lrintl.c (__lrintl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_nexttoward.c (__nexttoward): Use
	math_narrow_eval.
	* sysdeps/ieee754/ldbl-96/s_nexttowardf.c (__nexttowardf):
	Likewise.
	* sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c (__nldbl_nexttowardf):
	Likewise.
 2015-09-23 18:14:57 +00:00
Joseph Myers
c8235dda72 Avoid excess range overflowing results from cosh, sinh, lgamma (bug 18980). 
Various i386 libm functions return values with excess range and
precision; Wilco Dijkstra's patches to make isfinite etc. expand
inline cause this pre-existing issue to result in test failures (when
e.g. a result that overflows float but not long double gets counted as
overflowing for some purposes but not others).

This patch addresses those cases arising from functions defined in C,
adding a math_narrow_eval macro that forces values to memory to
eliminate excess precision if FLT_EVAL_METHOD indicates this is
needed, and is a no-op otherwise.  I'll convert existing uses of
volatile and asm for this purpose to use the new macro later, once
i386 has clean test results again (which requires fixes for .S files
as well).

Tested for x86_64 and x86.  Committed.

	[BZ #18980]
	* sysdeps/generic/math_private.h: Include <float.h>.
	(math_narrow_eval): New macro.
	[FLT_EVAL_METHOD != 0] (excess_precision): Likewise.
	* sysdeps/ieee754/dbl-64/e_cosh.c (__ieee754_cosh): Use
	math_narrow_eval on overflowing return value.
	* sysdeps/ieee754/dbl-64/e_lgamma_r.c (__ieee754_lgamma_r):
	Likewise.
	* sysdeps/ieee754/dbl-64/e_sinh.c (__ieee754_sinh): Likewise.
	* sysdeps/ieee754/flt-32/e_coshf.c (__ieee754_coshf): Likewise.
	* sysdeps/ieee754/flt-32/e_lgammaf_r.c (__ieee754_lgammaf_r):
	Likewise.
	* sysdeps/ieee754/flt-32/e_sinhf.c (__ieee754_sinhf): Likewise.
 2015-09-18 20:00:48 +00:00
Wilco Dijkstra
fe8c2b33ae Since we now inline isinf, isnan and isfinite in math.h, replace uses of __isinf_ns(l/f) 
with isinf, and remove the unused inlines __isinf_ns(l/f), __isnan(f) and __finite(f).

2015-09-18  Wilco Dijkstra  <wdijkstr@arm.com>

        * include/math.h: Remove __isinf_ns, __isinf_nsf, __isinf_nsl.
        * math/Makefile: Remove isinf_ns.c.
        * math/divtc3.c (__divtc3): Replace __isinf_nsl with isinf.
        * math/multc3.c (__multc3): Likewise.
        * math/s_casin.c (__casin): Likewise.
        * math/s_casinf.c (__casinf): Likewise.
        * math/s_casinl.c (__casinl): Likewise.
        * math/s_cproj.c (__cproj): Likewise.
        * math/s_cprojf.c (__cprojf): Likewise.
        * math/s_cprojl.c (__cprofl): Likewise.
        * math/s_ctan.c (__ctan): Likewise.
        * math/s_ctanf.c (__ctanf): Likewise.
        * math/s_ctanh.c (__ctanh): Likewise.
        * math/s_ctanhf.c (__ctanhf): Likewise.
        * math/s_ctanhl.c (__ctanhl): Likewise.
        * math/s_ctanl.c (__ctanl): Likewise.
        * math/w_fmod.c (__fmod): Likewise.
        * math/w_fmodf.c (__fmodf): Likewise.
        * math/w_fmodl.c (_fmodl): Likewise.
        * math/w_remainder.c (__remainder): Likewise.
        * math/w_remainderf.c (__remainderf): Likewise.
        * math/w_remainderl.c (__remainderl): Likewise.
        * math/w_scalb.c (__scalb): Likewise.
        * math/w_scalbf.c (__scalbf): Likewise.
        * math/w_scalbl.c (__scalbl): Likewise.
        * sysdeps/ieee754/dbl-64/s_isinf_ns.c: Deleted file.
        * sysdeps/ieee754/dbl-64/s_sincos.c (__sincos): Replace __isinf_ns
        with isinf.
        * sysdeps/ieee754/dbl-64/wordsize-64/math_private.h: Deleted file.
        * sysdeps/ieee754/dbl-64/wordsize-64/s_isinf_ns.c: Deleted file.
        * sysdeps/ieee754/flt-32/e_exp2f.c (__ieee754_exp2f): Replace
        __isinf_nsf with isinf.
        * sysdeps/ieee754/flt-32/math_private.h: Deleted file.
        * sysdeps/ieee754/flt-32/s_isinf_nsf.c: Deleted file.
        * sysdeps/ieee754/ldbl-128/s_isinf_nsl.c: Deleted file.
        * sysdeps/ieee754/ldbl-128/s_sincosl.c (__sincosl): Replace __isinf_nsl
        with isinf.
        * sysdeps/ieee754/ldbl-128ibm/s_cprojl.c(__cprojll): Replace
        __isinf_nsl with isinf.
        * sysdeps/ieee754/ldbl-128ibm/s_ctanl.c(__ctanl): Replace __isinf_nsl
        with isinf.
        * sysdeps/ieee754/ldbl-128ibm/s_isinf_nsl.c: Deleted file.
        * sysdeps/ieee754/ldbl-128ibm/s_sincosl.c (__sincosl): Replace
        __isinf_nsl with isinf.
        * sysdeps/ieee754/ldbl-96/s_isinf_nsl.c: Deleted file.
        * sysdeps/ieee754/ldbl-96/s_sincosl.c (__sincosl): Replace __isinf_nsl
        with isinf.
 2015-09-18 20:51:52 +01:00
Wilco Dijkstra
6565fcb6e1 Fix several build failures with GCC6 due to unused static variables. 
2015-09-18  Wilco Dijkstra  <wdijkstr@arm.com>

        * resolv/base64.c (rcsid): Remove unused static.
        * sysdeps/ieee754/dbl-64/atnat2.h (qpi1): Remove unused
        static.  (tqpi1): Likewise.
        * sysdeps/ieee754/dbl-64/uexp.h (one): Likewise.
        * sysdeps/ieee754/dbl-64/upow.h (sqrt_2): Likewise.
        * sysdeps/ieee754/flt-32/e_log10f.c (one): Likewise.
        * sysdeps/ieee754/flt-32/s_cosf.c (one): Likewise.
        * sysdeps/ieee754/ldbl-128/e_lgammal_r.c (zero): Likewise.
        * sysdeps/ieee754/ldbl-128/s_erfl.c (half): Likewise.
        * sysdeps/ieee754/ldbl-128/s_log1pl.c (maxlog): Likewise.
        * timezone/private.h (time_t_min): Likewise.  (time_t_max):
        Likewise.
 2015-09-18 20:42:54 +01:00
Wilco Dijkstra
020167a4ce Use the GCC builtin functions for the non-inlined signbit implementations. 
2015-09-18  Wilco Dijkstra  <wdijkstr@arm.com>

        * sysdeps/ieee754/dbl-64/s_signbit.c (__signbit):
        Use __builtin_signbit.
        * sysdeps/ieee754/flt-32/s_signbitf.c (__signbitf):
        Use __builtin_signbitf.
        * sysdeps/ieee754/ldbl-128/s_signbitl.c (__signbitl):
        Use __builtin_signbitl.
        * sysdeps/ieee754/ldbl-128ibm/s_signbitl.c (___signbitl): Likewise.
        * sysdeps/ieee754/ldbl-96/s_signbitl.c (__signbitl): Likewise.
 2015-09-18 16:39:08 +01:00
Joseph Myers
b8682397ab Reduce number of constants in __finite* (bug 15384). 
Bug 15384 notes that in __finite, two different constants are used
that could be the same constant (the result only depends on the
exponent of the floating-point representation), and that using the
same constant is better for architectures where constants need loading
from a constant pool.  This patch implements that change.

Tested for x86_64, mips64 and powerpc.

	[BZ #15384]
	* sysdeps/ieee754/dbl-64/s_finite.c (FINITE): Use same constant as
	bit-mask as in subtraction.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_finite.c (__finite):
	Likewise.
	* sysdeps/ieee754/flt-32/s_finitef.c (FINITEF): Likewise.
	* sysdeps/ieee754/ldbl-128/s_finitel.c (__finitel): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_finitel.c (__finitel): Likewise.
 2015-09-17 16:47:14 +00:00
Joseph Myers
46f74e1dee Fix tgamma missing underflows (bug 18951). 
Similar to various other bugs in this area, tgamma functions can fail
to raise the underflow exception when the result is tiny and inexact
but one or more low bits of the intermediate result that is scaled
down are zero.  This patch forces the exception in a similar way to
previous fixes.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #18951]
	* sysdeps/ieee754/dbl-64/e_gamma_r.c (__ieee754_gamma_r): Force
	underflow exception for small results.
	* sysdeps/ieee754/flt-32/e_gammaf_r.c (__ieee754_gammaf_r):
	Likewise.
	* sysdeps/ieee754/ldbl-128/e_gammal_r.c (__ieee754_gammal_r):
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (__ieee754_gammal_r):
	Likewise.
	* sysdeps/ieee754/ldbl-96/e_gammal_r.c (__ieee754_gammal_r):
	Likewise.
	* math/auto-libm-test-in: Add more tests of tgamma.
	* math/auto-libm-test-out: Regenerated.
 2015-09-17 15:51:54 +00:00
Joseph Myers
da2f4f2dd5 Make scalbn set errno (bug 6803). 
As noted in bug 6803, scalbn fails to set errno on overflow and
underflow.  This patch fixes this by making scalbn an alias of ldexp,
which has exactly the same semantics (for floating-point types with
radix 2) and already has wrappers that deal with setting errno,
instead of an alias of the internal __scalbn (which ldexp calls).

Notes:

* Where compat symbols were defined for scalbn functions, I didn't
  change what they point to (to keep the patch minimal), so such
  compat symbols continue to go directly to the non-errno-setting
  functions.

* Mike, I didn't do anything with the IA64 versions of these
  functions, where I think both the ldexp and scalbn functions already
  deal with setting errno.  As a cleanup (not needed to fix this bug)
  however you might want to make those functions into aliases for
  IA64; there is no need for them to be separate function
  implementations at all.

* This concludes the fix for bug 6803 since the scalb and scalbln
  cases of that bug were fixed some time ago.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #6803]
	* math/s_ldexp.c (scalbn): Define as weak alias of __ldexp.
	[NO_LONG_DOUBLE] (scalbnl): Define as weak alias of __ldexp.
	* math/s_ldexpf.c (scalbnf): Define as weak alias of __ldexpf.
	* math/s_ldexpl.c (scalbnl): Define as weak alias of __ldexpl.
	* sysdeps/i386/fpu/s_scalbn.S (scalbn): Remove alias.
	* sysdeps/i386/fpu/s_scalbnf.S (scalbnf): Likewise.
	* sysdeps/i386/fpu/s_scalbnl.S (scalbnl): Likewise.
	* sysdeps/ieee754/dbl-64/s_scalbn.c (scalbn): Likewise.
	[NO_LONG_DOUBLE] (scalbnl): Likewise.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_scalbn.c (scalbn):
	Likewise.
	[NO_LONG_DOUBLE] (scalbnl): Likewise.
	* sysdeps/ieee754/flt-32/s_scalbnf.c (scalbnf): Likewise.
	* sysdeps/ieee754/ldbl-128/s_scalbnl.c (scalbnl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_scalbnl.c (scalbnl): Remove
	long_double_symbol calls.
	* sysdeps/ieee754/ldbl-64-128/s_scalbnl.c (scalbnl): Likewise.
	* sysdeps/ieee754/ldbl-opt/s_ldexpl.c (__ldexpl_2): Define as
	strong alias of __ldexpl.
	(scalbnl): Define using long_double_symbol.
	* sysdeps/m68k/m680x0/fpu/s_scalbn.c (__CONCATX(scalbn,suffix)):
	Remove alias.
	* sysdeps/sparc/sparc64/soft-fp/s_scalbnl.c (scalbnl): Likewise.
	* sysdeps/x86_64/fpu/s_scalbnl.S (scalbnl): Likewise.
	* math/libm-test.inc (scalbn_test_data): Add errno expectations.
	(scalbln_test_data): Add more errno expectations.
 2015-09-16 21:11:00 +00:00
Joseph Myers
903af5af9a Fix exp2 missing underflows (bug 16521). 
Various exp2 implementations in glibc can miss underflow exceptions
when the scaling down part of the calculation is exact (or, in the x86
case, when the conversion from extended precision to the target
precision is exact).  This patch forces the exception in a similar way
to previous fixes.

The x86 exp2f changes may in fact not be needed for this purpose -
it's likely to be the case that no argument of type float has an exp2
result so close to an exact subnormal float value that it equals that
value when rounded to 64 bits (even taking account of variation
between different x86 implementations).  However, they are included
for consistency with the changes to exp2 and so as to fix the exp2f
part of bug 18875 by ensuring that excess range and precision is
removed from underflowing return values.

Tested for x86_64, x86 and mips64.

	[BZ #16521]
	[BZ #18875]
	* math/e_exp2l.c (__ieee754_exp2l): Force underflow exception for
	small results.
	* sysdeps/i386/fpu/e_exp2.S (dbl_min): New object.
	(MO): New macro.
	(__ieee754_exp2): For small results, force underflow exception and
	remove excess range and precision from return value.
	* sysdeps/i386/fpu/e_exp2f.S (flt_min): New object.
	(MO): New macro.
	(__ieee754_exp2f): For small results, force underflow exception
	and remove excess range and precision from return value.
	* sysdeps/i386/fpu/e_exp2l.S (ldbl_min): New object.
	(MO): New macro.
	(__ieee754_exp2l): Force underflow exception for small results.
	* sysdeps/ieee754/dbl-64/e_exp2.c (__ieee754_exp2): Likewise.
	* sysdeps/ieee754/flt-32/e_exp2f.c (__ieee754_exp2f): Likewise.
	* sysdeps/x86_64/fpu/e_exp2l.S (ldbl_min): New object.
	(MO): New macro.
	(__ieee754_exp2l): Force underflow exception for small results.
	* math/auto-libm-test-in: Add more tests or exp2.
	* math/auto-libm-test-out: Regenerated.
 2015-09-14 22:00:12 +00:00
Joseph Myers
050f29c188 Fix lgamma (negative) inaccuracy (bug 2542, bug 2543, bug 2558). 
The existing implementations of lgamma functions (except for the ia64
versions) use the reflection formula for negative arguments.  This
suffers large inaccuracy from cancellation near zeros of lgamma (near
where the gamma function is +/- 1).

This patch fixes this inaccuracy.  For arguments above -2, there are
no zeros and no large cancellation, while for sufficiently large
negative arguments the zeros are so close to integers that even for
integers +/- 1ulp the log(gamma(1-x)) term dominates and cancellation
is not significant.  Thus, it is only necessary to take special care
about cancellation for arguments around a limited number of zeros.

Accordingly, this patch uses precomputed tables of relevant zeros,
expressed as the sum of two floating-point values.  The log of the
ratio of two sines can be computed accurately using log1p in cases
where log would lose accuracy.  The log of the ratio of two gamma(1-x)
values can be computed using Stirling's approximation (the difference
between two values of that approximation to lgamma being computable
without computing the two values and then subtracting), with
appropriate adjustments (which don't reduce accuracy too much) in
cases where 1-x is too small to use Stirling's approximation directly.

In the interval from -3 to -2, using the ratios of sines and of
gamma(1-x) can still produce too much cancellation between those two
parts of the computation (and that interval is also the worst interval
for computing the ratio between gamma(1-x) values, which computation
becomes more accurate, while being less critical for the final result,
for larger 1-x).  Because this can result in errors slightly above
those accepted in glibc, this interval is instead dealt with by
polynomial approximations.  Separate polynomial approximations to
(|gamma(x)|-1)(x-n)/(x-x0) are used for each interval of length 1/8
from -3 to -2, where n (-3 or -2) is the nearest integer to the
1/8-interval and x0 is the zero of lgamma in the relevant half-integer
interval (-3 to -2.5 or -2.5 to -2).

Together, the two approaches are intended to give sufficient accuracy
for all negative arguments in the problem range.  Outside that range,
the previous implementation continues to be used.

Tested for x86_64, x86, mips64 and powerpc.  The mips64 and powerpc
testing shows up pre-existing problems for ldbl-128 and ldbl-128ibm
with large negative arguments giving spurious "invalid" exceptions
(exposed by newly added tests for cases this patch doesn't affect the
logic for); I'll address those problems separately.

	[BZ #2542]
	[BZ #2543]
	[BZ #2558]
	* sysdeps/ieee754/dbl-64/e_lgamma_r.c (__ieee754_lgamma_r): Call
	__lgamma_neg for arguments from -28.0 to -2.0.
	* sysdeps/ieee754/flt-32/e_lgammaf_r.c (__ieee754_lgammaf_r): Call
	__lgamma_negf for arguments from -15.0 to -2.0.
	* sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r):
	Call __lgamma_negl for arguments from -48.0 or -50.0 to -2.0.
	* sysdeps/ieee754/ldbl-96/e_lgammal_r.c (__ieee754_lgammal_r):
	Call __lgamma_negl for arguments from -33.0 to -2.0.
	* sysdeps/ieee754/dbl-64/lgamma_neg.c: New file.
	* sysdeps/ieee754/dbl-64/lgamma_product.c: Likewise.
	* sysdeps/ieee754/flt-32/lgamma_negf.c: Likewise.
	* sysdeps/ieee754/flt-32/lgamma_productf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/lgamma_negl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/lgamma_productl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/lgamma_negl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/lgamma_productl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/lgamma_negl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/lgamma_product.c: Likewise.
	* sysdeps/ieee754/ldbl-96/lgamma_productl.c: Likewise.
	* sysdeps/generic/math_private.h (__lgamma_negf): New prototype.
	(__lgamma_neg): Likewise.
	(__lgamma_negl): Likewise.
	(__lgamma_product): Likewise.
	(__lgamma_productl): Likewise.
	* math/Makefile (libm-calls): Add lgamma_neg and lgamma_product.
	* math/auto-libm-test-in: Add more tests of lgamma.
	* math/auto-libm-test-out: Regenerated.
	* sysdeps/i386/fpu/libm-test-ulps: Update.
	* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
 2015-09-10 22:27:58 +00:00
Joseph Myers
739babd775 Fix fma spurious underflows (bug 18824). 
Various fma implementations have logic that, when computing fma (x, y,
z) where z is large (so care needs taking to avoid internal overflow)
but x * y is small, scale x * y up instead of down to avoid internal
underflows resulting from scaling down.  (In these cases, x * y is
small enough that only its sign actually matters rather than the exact
value.)

The threshold for scaling up instead of down was correct for "if the
unscaled values were multiplied, the low part of the multiplication
could underflow", and the scaling was sufficient to ensure that the
low part of the multiplication did not underflow (given that cases of
very small x * y - less than half the least subnormal - were
previously dealt with).  However, the choice in the functions wasn't
between scaling up or no scaling, but between scaling up and scaling
down (scaling down actually being needed when x * y isn't so small
compared to z and so the exact value does matter).  Thus a larger
threshold is needed to ensure that scaling down doesn't produce values
the multiplication of whose low parts underflows.  This patch
increases the thresholds accordingly.

Tested for x86_64, x86 and mips64 (with the MIPS version of s_fmal.c
removed so that the ldbl-128 version gets tested instead of the
soft-fp one).

	[BZ #18824]
	* sysdeps/ieee754/dbl-64/s_fma.c (__fma): Increase threshold for
	scaling x * y up instead of down.
	* sysdeps/ieee754/ldbl-128/s_fmal.c (__fmal): Likewise.
	* sysdeps/ieee754/ldbl-96/s_fmal.c (__fmal): Likewise.
	* math/auto-libm-test-in: Add more tests of fma.
	* math/auto-libm-test-out: Regenerated.
 2015-08-14 17:15:06 +00:00
Joseph Myers
37d83a089d Fix tanh missing underflows (bug 16520). 
Similar to various other bugs in this area, some tanh implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact.  This patch forces the exception in a
similar way to previous fixes.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #16520]
	* sysdeps/ieee754/dbl-64/s_tanh.c: Include <float.h>.
	(__tanh): Force underflow exception for arguments with small
	absolute value.
	* sysdeps/ieee754/flt-32/s_tanhf.c: Include <float.h>.
	(__tanhf): Force underflow exception for arguments with small
	absolute value.
	* sysdeps/ieee754/ldbl-128/s_tanhl.c: Include <float.h>.
	(__tanhl): Force underflow exception for arguments with small
	absolute value.
	* sysdeps/ieee754/ldbl-128ibm/s_tanhl.c: Include <float.h>.
	(__tanhl): Force underflow exception for arguments with small
	absolute value.
	* sysdeps/ieee754/ldbl-96/s_tanhl.c: Include <float.h>.
	(__tanhl): Force underflow exception for arguments with small
	absolute value.
	* math/auto-libm-test-in: Add more tests of tanh.
	* math/auto-libm-test-out: Regenerated.
	* sysdeps/i386/fpu/libm-test-ulps: Update.
 2015-08-13 16:40:39 +00:00
Joseph Myers
37550cb3d6 Fix tan missing underflows (bug 16517). 
Similar to various other bugs in this area, some tan implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact.  This patch forces the exception in a
similar way to previous fixes.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #16517]
	* sysdeps/ieee754/dbl-64/s_tan.c: Include <float.h>.
	(tan): Force underflow exception for arguments with small absolute
	value.
	* sysdeps/ieee754/flt-32/k_tanf.c: Include <float.h>.
	(__kernel_tanf): Force underflow exception for arguments with
	small absolute value.
	* sysdeps/ieee754/ldbl-128/k_tanl.c: Include <float.h>.
	(__kernel_tanl): Force underflow exception for arguments with
	small absolute value.
	* sysdeps/ieee754/ldbl-128ibm/k_tanl.c: Include <float.h>.
	(__kernel_tanl): Force underflow exception for arguments with
	small absolute value.
	* sysdeps/ieee754/ldbl-96/k_tanl.c: Include <float.h>.
	(__kernel_tanl): Force underflow exception for arguments with
	small absolute value.
	* math/auto-libm-test-in: Add more tests of tan.
	* math/auto-libm-test-out: Regenerated.
 2015-08-07 23:10:35 +00:00
Joseph Myers
5e29dd5737 Fix sinh missing underflows (bug 16519). 
Similar to various other bugs in this area, some sinh implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact.  This patch forces the exception in a
similar way to previous fixes.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #16519]
	* sysdeps/ieee754/dbl-64/e_sinh.c: Include <float.h>.
	(__ieee754_sinh): Force underflow exception for arguments with
	small absolute value.
	* sysdeps/ieee754/flt-32/e_sinhf.c: Include <float.h>.
	(__ieee754_sinhf): Force underflow exception for arguments with
	small absolute value.
	* sysdeps/ieee754/ldbl-128/e_sinhl.c: Include <float.h>.
	(__ieee754_sinhl): Force underflow exception for arguments with
	small absolute value.
	* sysdeps/ieee754/ldbl-128ibm/e_sinhl.c: Include <float.h>.
	(__ieee754_sinhl): Force underflow exception for arguments with
	small absolute value.
	* sysdeps/ieee754/ldbl-96/e_sinhl.c: Include <float.h>.
	(__ieee754_sinhl): Force underflow exception for arguments with
	small absolute value.
	* math/auto-libm-test-in: Add more tests of sinh.
	* math/auto-libm-test-out: Regenerated.
	* sysdeps/i386/fpu/libm-test-ulps: Update.
 2015-08-06 23:01:09 +00:00
Joseph Myers
e02920bc02 Improve tgamma accuracy (bug 18613). 
In non-default rounding modes, tgamma can be slightly less accurate
than permitted by glibc's accuracy goals.

Part of the problem is error accumulation, addressed in this patch by
setting round-to-nearest for internal computations.  However, there
was also a bug in the code dealing with computing pow (x + n, x + n)
where x + n is not exactly representable, providing another source of
error even in round-to-nearest mode; it was necessary to address both
bugs to get errors for all testcases within glibc's accuracy goals.
Given this second fix, accuracy in round-to-nearest mode is also
improved (hence regeneration of ulps for tgamma should be from scratch
- truncate libm-test-ulps or at least remove existing tgamma entries -
so that the expected ulps can be reduced).

Some additional complications also arose.  Certain tgamma tests should
strictly, according to IEEE semantics, overflow or not depending on
the rounding mode; this is beyond the scope of glibc's accuracy goals
for any function without exactly-determined results, but
gen-auto-libm-tests doesn't handle being lax there as it does for
underflow.  (libm-test.inc also doesn't handle being lax about whether
the result in cases very close to the overflow threshold is infinity
or a finite value close to overflow, but that doesn't cause problems
in this case though I've seen it cause problems with random test
generation for some functions.)  Thus, spurious-overflow markings,
with a comment, are added to auto-libm-test-in (no bug in Bugzilla
because the issue is with the testsuite, not a user-visible bug in
glibc).  And on x86, after the patch I saw ERANGE issues as previously
reported by Carlos (see my commentary in
<https://sourceware.org/ml/libc-alpha/2015-01/msg00485.html>), which
needed addressing by ensuring excess range and precision were
eliminated at various points if FLT_EVAL_METHOD != 0.

I also noticed and fixed a cosmetic issue where 1.0f was used in long
double functions and should have been 1.0L.

This completes the move of all functions to testing in all rounding
modes with ALL_RM_TEST, so gen-libm-have-vector-test.sh is updated to
remove the workaround for some functions not using ALL_RM_TEST.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #18613]
	* sysdeps/ieee754/dbl-64/e_gamma_r.c (gamma_positive): Take log of
	X_ADJ not X when adjusting exponent.
	(__ieee754_gamma_r): Do intermediate computations in
	round-to-nearest then adjust overflowing and underflowing results
	as needed.
	* sysdeps/ieee754/flt-32/e_gammaf_r.c (gammaf_positive): Take log
	of X_ADJ not X when adjusting exponent.
	(__ieee754_gammaf_r): Do intermediate computations in
	round-to-nearest then adjust overflowing and underflowing results
	as needed.
	* sysdeps/ieee754/ldbl-128/e_gammal_r.c (gammal_positive): Take
	log of X_ADJ not X when adjusting exponent.
	(__ieee754_gammal_r): Do intermediate computations in
	round-to-nearest then adjust overflowing and underflowing results
	as needed.  Use 1.0L not 1.0f as numerator of division.
	* sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (gammal_positive): Take
	log of X_ADJ not X when adjusting exponent.
	(__ieee754_gammal_r): Do intermediate computations in
	round-to-nearest then adjust overflowing and underflowing results
	as needed.  Use 1.0L not 1.0f as numerator of division.
	* sysdeps/ieee754/ldbl-96/e_gammal_r.c (gammal_positive): Take log
	of X_ADJ not X when adjusting exponent.
	(__ieee754_gammal_r): Do intermediate computations in
	round-to-nearest then adjust overflowing and underflowing results
	as needed.  Use 1.0L not 1.0f as numerator of division.
	* math/libm-test.inc (tgamma_test_data): Remove one test.  Moved
	to auto-libm-test-in.
	(tgamma_test): Use ALL_RM_TEST.
	* math/auto-libm-test-in: Add one test of tgamma.  Mark some other
	tests of tgamma with spurious-overflow.
	* math/auto-libm-test-out: Regenerated.
	* math/gen-libm-have-vector-test.sh: Do not check for START.
	* sysdeps/i386/fpu/libm-test-ulps: Update.
	* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
 2015-06-29 23:29:35 +00:00
Joseph Myers
63dbe5f322 Fix j1, jn missing underflows (bug 16559). 
Similar to various other bugs in this area, j1 and jn implementations
can fail to raise the underflow exception when the internal
computation is exact although the actual function is inexact.  This
patch forces the exception in a similar way to other such fixes.  (The
ldbl-128 / ldbl-128ibm j1l implementation is different and doesn't
need a change for this until spurious underflows in it are fixed.)

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #16559]
	* sysdeps/ieee754/dbl-64/e_j1.c: Include <float.h>.
	(__ieee754_j1): Force underflow exception for small results.
	* sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise.
	* sysdeps/ieee754/flt-32/e_j1f.c: Include <float.h>.
	(__ieee754_j1f): Force underflow exception for small results.
	* sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise.
	* sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_j1l.c: Include <float.h>.
	(__ieee754_j1l): Force underflow exception for small results.
	* sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise.
	* math/auto-libm-test-in: Add more tests of j1 and jn.
	* math/auto-libm-test-out: Regenerated.
 2015-06-29 16:52:16 +00:00
Joseph Myers
a8e2112ae3 Use round-to-nearest internally in jn, test with ALL_RM_TEST (bug 18602). 
Some existing jn tests, if run in non-default rounding modes, produce
errors above those accepted in glibc, which causes problems for moving
tests of jn to use ALL_RM_TEST.  This patch makes jn set rounding
to-nearest internally, as was done for yn some time ago, then computes
the appropriate underflowing value for results that underflowed to
zero in to-nearest, and moves the tests to ALL_RM_TEST.  It does
nothing about the general inaccuracy of Bessel function
implementations in glibc, though it should make jn more accurate on
average in non-default rounding modes through reduced error
accumulation.  The recomputation of results that underflowed to zero
should as a side-effect fix some cases of bug 16559, where jn just
used an exact zero, but that is *not* the goal of this patch and other
cases of that bug remain unfixed.

(Most of the changes in the patch are reindentation to add new scopes
for SET_RESTORE_ROUND*.)

Tested for x86_64, x86, powerpc and mips64.

	[BZ #16559]
	[BZ #18602]
	* sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Set
	round-to-nearest internally then recompute results that
	underflowed to zero in the original rounding mode.
	* sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise.
	* sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise
	* math/libm-test.inc (jn_test): Use ALL_RM_TEST.
	* sysdeps/i386/fpu/libm-test-ulps: Update.
	* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
 2015-06-25 21:46:02 +00:00
Joseph Myers
ad39cce0da Fix sin, sincos missing underflows (bug 16526, bug 16538). 
Similar to various other bugs in this area, some sin and sincos
implementations do not raise the underflow exception for subnormal
arguments, when the result is tiny and inexact.  This patch forces the
exception in a similar way to previous fixes.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #16526]
	[BZ #16538]
	* sysdeps/ieee754/dbl-64/s_sin.c: Include <float.h>.
	(__sin): Force underflow exception for arguments with small
	absolute value.
	* sysdeps/ieee754/flt-32/k_sinf.c: Include <float.h>.
	(__kernel_sinf): Force underflow exception for arguments with
	small absolute value.
	* sysdeps/ieee754/ldbl-128/k_sincosl.c: Include <float.h>.
	(__kernel_sincosl): Force underflow exception for arguments with
	small absolute value.
	* sysdeps/ieee754/ldbl-128/k_sinl.c: Include <float.h>.
	(__kernel_sinl): Force underflow exception for arguments with
	small absolute value.
	* sysdeps/ieee754/ldbl-128ibm/k_sincosl.c: Include <float.h>.
	(__kernel_sincosl): Force underflow exception for arguments with
	small absolute value.
	* sysdeps/ieee754/ldbl-128ibm/k_sinl.c: Include <float.h>.
	(__kernel_sinl): Force underflow exception for arguments with
	small absolute value.
	* sysdeps/ieee754/ldbl-96/k_sinl.c: Include <float.h>.
	(__kernel_sinl): Force underflow exception for arguments with
	small absolute value.
	* sysdeps/powerpc/fpu/k_sinf.c: Include <float.h>.
	(__kernel_sinf): Force underflow exception for arguments with
	small absolute value.
	* math/auto-libm-test-in: Add more tests of sin and sincos.
	* math/auto-libm-test-out: Regenerated.
 2015-06-23 22:24:20 +00:00
Joseph Myers
b59549574e Fix exp2, exp2f spurious underflows (bug 18219). 
The dbl-64 and flt-32 implementations of exp2 functions produce
spurious underflow exceptions.  The underlying reason is the same in
both cases: the computation works as (2^a - 1)*2^b + 2^b for suitably
chosen a and b, where a has small magnitude so 2^a - 1 can be computed
with a low-degree polynomial approximation, and (2^a - 1)*2^b can
underflow even when the final result does not.  This patch fixes this
by adjusting the threshold for when scaling is used to avoid
intermediate underflow so it works for any possible value of a where
the final result would not underflow.

Tested for x86_64 and x86.

	[BZ #18219]
	* sysdeps/ieee754/dbl-64/e_exp2.c (__ieee754_exp2): Reduce
	threshold on absolute value of exponent for which scaling is used.
	* sysdeps/ieee754/flt-32/e_exp2f.c (__ieee754_exp2f): Likewise.
	* math/auto-libm-test-in: Add more tests of exp2.
	* math/auto-libm-test-out: Regenerated.
 2015-06-23 14:35:18 +00:00
Joseph Myers
554edb23ff Fix expm1 missing underflows (bug 16353). 
Similar to various other bugs in this area, some expm1 implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact.  This patch forces the exception in a
similar way to previous fixes.

(The issue does not apply to the ldbl-* implementations or to those
for x86 / x86_64 long double.  The change to
sysdeps/ieee754/dbl-64/wordsize-64/e_cosh.c is one I missed when
previously fixing bug 16354; the bug in that implementation was
previously latent, but the expm1 fixes stopped it being latent and so
required it to be fixed to avoid spurious underflows from cosh.)

Tested for x86_64 and x86.

	[BZ #16353]
	* sysdeps/i386/fpu/s_expm1.S (dbl_min): New object.
	(__expm1): Force underflow exception for arguments with small
	absolute value.
	* sysdeps/i386/fpu/s_expm1f.S (flt_min): New object.
	(__expm1f): Force underflow exception for arguments with small
	absolute value.
	* sysdeps/ieee754/dbl-64/s_expm1.c: Include <float.h>.
	(__expm1): Force underflow exception for arguments with small
	absolute value.
	* sysdeps/ieee754/flt-32/s_expm1f.c: Include <float.h>.
	(__expm1f): Force underflow exception for arguments with small
	absolute value.
	* sysdeps/ieee754/dbl-64/wordsize-64/e_cosh.c (__ieee754_cosh):
	Check for small arguments before calling __expm1.
	* math/auto-libm-test-in: Do not mark underflow exceptions as
	possibly missing for bug 16353.
	* math/auto-libm-test-out: Regenerated.
 2015-06-22 21:06:19 +00:00
Joseph Myers
8db3cdefef Fix asinh missing underflows (bug 16350). 
Similar to various other bugs in this area, some asinh implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact.  This patch forces the exception in a
similar way to previous fixes.

Tested for x86_64, x86 and mips64.

	[BZ #16350]
	* sysdeps/i386/fpu/s_asinh.S (__asinh): Force underflow exception
	for arguments with small absolute value.
	* sysdeps/i386/fpu/s_asinhf.S (__asinhf): Likewise.
	* sysdeps/i386/fpu/s_asinhl.S (__asinhl): Likewise.
	* sysdeps/ieee754/dbl-64/s_asinh.c: Include <float.h>.
	(__asinh): Force underflow exception for arguments with small
	absolute value.
	* sysdeps/ieee754/flt-32/s_asinhf.c: Include <float.h>.
	(__asinhf): Force underflow exception for arguments with small
	absolute value.
	* sysdeps/ieee754/ldbl-128/s_asinhl.c: Include <float.h>.
	(__asinhl): Force underflow exception for arguments with small
	absolute value.
	* sysdeps/ieee754/ldbl-128ibm/s_asinhl.c: Include <float.h>.
	(__asinhl): Force underflow exception for arguments with small
	absolute value.
	* sysdeps/ieee754/ldbl-96/s_asinhl.c: Include <float.h>.
	(__asinhl): Force underflow exception for arguments with small
	absolute value.
	* math/auto-libm-test-in: Do not mark underflow exceptions as
	possibly missing for bug 16350.
	* math/auto-libm-test-out: Regenerated.
 2015-06-18 23:27:41 +00:00
Wilco Dijkstra
d81f90ccd0 This patch renames all uses of __isinf*, __isnan*, __finite* and __signbit* to use standard C99 macros. This has no effect on generated code. 2015-06-03 15:41:36 +01:00
Wilco Dijkstra
be2e25bbd7 2015-05-28 Wilco Dijkstra <wdijkstr@arm.com> 
* sysdeps/ieee754/dbl-64/s_fabs.c: (__fabs): Call __builtin_fabs.
        * sysdeps/ieee754/flt-32/s_fabsf.c: (__fabsf): Likewise.
 2015-05-28 11:42:55 +01:00
Joseph Myers
9124ccf76a Fix lgamma implementations for -Wuninitialized. 
If you remove the "override CFLAGS += -Wno-uninitialized" in
math/Makefile, you get errors from lgamma implementations of the form:

../sysdeps/ieee754/dbl-64/e_lgamma_r.c: In function '__ieee754_lgamma_r':
../sysdeps/ieee754/dbl-64/e_lgamma_r.c:297:13: error: 'nadj' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  if(hx<0) r = nadj - r;

This is one of the standard kinds of false positive uninitialized
warnings: nadj is set under a certain condition, and then later used
under the same condition.  This patch uses DIAG_* macros to suppress
the warning on the use of nadj.  The ldbl-128 / ldbl-128ibm
implementation has a substantially different structure that avoids
this issue.

Tested for x86_64.  (In fact this patch eliminates the need for that
-Wno-uninitialized on x86_64, but I want to test on more architectures
before removing it.)

	* sysdeps/ieee754/dbl-64/e_lgamma_r.c: Include <libc-internal.h>.
	(__ieee754_lgamma_r): Ignore uninitialized warnings around use of
	NADJ.
	* sysdeps/ieee754/flt-32/e_lgammaf_r.c: Include <libc-internal.h>.
	(__ieee754_lgammaf_r): Ignore uninitialized warnings around use of
	NADJ.
	* sysdeps/ieee754/ldbl-96/e_lgammal_r.c: Include <libc-internal.h>.
	(__ieee754_lgammal_r): Ignore uninitialized warnings around use of
	NADJ.
 2015-05-21 23:44:33 +00:00
Joseph Myers
89f3b6e18c Fix sysdeps/ieee754/dbl-64/mpa.c for -Wuninitialized. 
If you remove the "override CFLAGS += -Wno-uninitialized" in
math/Makefile, one of the errors you get is:

../sysdeps/ieee754/dbl-64/mpa.c: In function '__mp_dbl.part.0':
../sysdeps/ieee754/dbl-64/mpa.c:183:5: error: 'c' may be used uninitialized in this function [-Werror=maybe-uninitialized]
   c *= X[0];

The problem is that the p < 5 case initializes c if p is 1, 2, 3 or 4
but not otherwise, and in fact p is positive for all calls to this
function so the uninitialized case can't actually occur.  This patch
replaces the "if (p == 4)" last case with a comment so the compiler
can see that all paths do initialize c.

Tested for x86_64.

	* sysdeps/ieee754/dbl-64/mpa.c (norm): Remove if condition on
	(p == 4) case.
 2015-05-21 23:05:45 +00:00
Joseph Myers
8020a80887 Fix atanhl missing underflows (bug 16352). 
Similar to various other bugs in this area, some atanh implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact.  This patch forces the exception in a
similar way to previous fixes.  (No change in this regard is needed
for the i386 implementation; special handling to force underflows in
these cases will only be needed there when the spurious underflows,
bug 18049, get fixed.)

Tested for x86_64, x86, powerpc and mips64.

	[BZ #16352]
	* sysdeps/i386/fpu/e_atanh.S (dbl_min): New object.
	(__ieee754_atanh): Force underflow exception for results with
	small absolute value.
	* sysdeps/i386/fpu/e_atanhf.S (flt_min): New object.
	(__ieee754_atanhf): Force underflow exception for results with
	small absolute value.
	* sysdeps/ieee754/dbl-64/e_atanh.c: Include <float.h>.
	(__ieee754_atanh): Force underflow exception for results with
	small absolute value.
	* sysdeps/ieee754/flt-32/e_atanhf.c: Include <float.h>.
	(__ieee754_atanhf): Force underflow exception for results with
	small absolute value.
	* sysdeps/ieee754/ldbl-128/e_atanhl.c: Include <float.h>.
	(__ieee754_atanhl): Force underflow exception for results with
	small absolute value.
	* sysdeps/ieee754/ldbl-128ibm/e_atanhl.c: Include <float.h>.
	(__ieee754_atanhl): Force underflow exception for results with
	small absolute value.
	* sysdeps/ieee754/ldbl-96/e_atanhl.c: Include <float.h>.
	(__ieee754_atanhl): Force underflow exception for results with
	small absolute value.
	* math/auto-libm-test-in: Do not allow missing underflow
	exceptions from atanh.
	* math/auto-libm-test-out: Regenerated.
 2015-05-15 22:07:57 +00:00
Wilco Dijkstra
0e9be4db8f Remove various ABS macros and replace uses with fabs (or in one case abs) 
which is more efficient on all targets.
 2015-05-15 11:04:40 +00:00
Joseph Myers
0b7a5f9201 Fix log1p missing underflows (bug 16339). 
Similar to various other bugs in this area, some log1p implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact.  This patch forces the exception in a
similar way to previous fixes.  (The ldbl-128ibm implementation
doesn't currently need any change as it already generates this
exception, albeit through code that would generate spurious exceptions
in other cases; special code for this issue will only be needed there
when fixing the spurious exceptions.)

Tested for x86_64, x86, powerpc and mips64.

	[BZ #16339]
	* sysdeps/i386/fpu/s_log1p.S (dbl_min): New object.
	(__log1p): Force underflow exception for results with small
	absolute value.
	* sysdeps/i386/fpu/s_log1pf.S (flt_min): New object.
	(__log1pf): Force underflow exception for results with small
	absolute value.
	* sysdeps/ieee754/dbl-64/s_log1p.c: Include <float.h>.
	(__log1p): Force underflow exception for results with small
	absolute value.
	* sysdeps/ieee754/flt-32/s_log1pf.c: Include <float.h>.
	(__log1pf): Force underflow exception for results with small
	absolute value.
	* sysdeps/ieee754/ldbl-128/s_log1pl.c: Include <float.h>.
	(__log1pl): Force underflow exception for results with small
	absolute value.
	* math/auto-libm-test-in: Do not allow missing underflow
	exceptions from log1p.
	* math/auto-libm-test-out: Regenerated.
 2015-05-14 23:38:07 +00:00
Wilco Dijkstra
92f2897953 Use __copysign rather than copysign. 2015-04-22 12:07:56 +00:00
Stefan Liebler
de8aadd52c Set errno for log1p on pole/domain error. 
According to bug 6792, errno is not set to ERANGE/EDOM
by calling log1p/log1pf/log1pl with x = -1 or x < -1.

This patch adds a wrapper which sets errno in those cases
and returns the value of the existing __log1p function.
The log1p is now an alias to the wrapper function
instead of __log1p.

The files in sysdeps are reflecting these changes.
The ia64 implementation sets errno by itself,
thus the wrapper-file is empty.

The libm-test is adjusted for log1p-tests to check errno.

	[BZ #6792]
	* math/w_log1p.c: New file.
	* math/w_log1pf.c: Likewise.
	* math/w_log1pl.c: Likewise.
	* math/Makefile (libm-calls): Add w_log1p.
	* math/s_log1pl.c (log1pl): Remove weak_alias.
	* sysdeps/i386/fpu/s_log1p.S (log1p): Likewise.
	* sysdeps/i386/fpu/s_log1pf.S (log1pf): Likewise.
	* sysdeps/i386/fpu/s_log1pl.S (log1pl): Likewise.
	* sysdeps/x86_64/fpu/s_log1pl.S (log1pl): Likewise.
	* sysdeps/ieee754/dbl-64/s_log1p.c (log1p): Likewise.
	[NO_LONG_DOUBLE] (log1pl): Likewise.
	* sysdeps/ieee754/flt-32/s_log1pf.c (log1pf): Likewise.
	* sysdeps/ieee754/ldbl-128/s_log1pl.c (log1pl): Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_log1pl.c
	(log1p): Remove long_double_symbol.
	* sysdeps/ieee754/ldbl-128ibm/s_log1pl.c (log1pl): Likewise.
	* sysdeps/ieee754/ldbl-64-128/w_log1pl.c: New file.
	* sysdeps/ieee754/ldbl-128ibm/w_log1pl.c: Likewise.
	* sysdeps/m68k/m680x0/fpu/s_log1p.c: Define empty weak_alias to
	remove weak_alias for corresponding log1p function.
	* sysdeps/m68k/m680x0/fpu/s_log1pf.c: Likewise.
	* sysdeps/m68k/m680x0/fpu/s_log1pl.c: Likewise.
	* sysdeps/ia64/fpu/w_log1p.c: New file.
	* sysdeps/ia64/fpu/w_log1pf.c: Likewise.
	* sysdeps/ia64/fpu/w_log1pl.c: Likewise.
	* math/libm-test.inc (log1p_test_data):	Add errno expectations.
 2015-04-13 21:19:27 +02:00
Joseph Myers
8431838dde Fix dbl-64 atan2 in non-default rounding modes (bug 18210, bug 18211). 
The dbl-64 implementation of atan2 does computations that expect to
run in round-to-nearest mode, and in other modes the errors can
accumulate to more than the maximum accepted 9ulp.  This patch makes
it use FE_TONEAREST internally, similar to other functions with such
issues.  Tests that previously produced large errors are added for
atan2 and the closely related carg, clog and clog10 functions.

Tested for x86_64 and x86 and ulps updated accordingly.

	[BZ #18210]
	[BZ #18211]
	* sysdeps/ieee754/dbl-64/e_atan2.c: Include <fenv.h>.
	(__ieee754_atan2): Set FE_TONEAREST mode for internal
	computations.
	* math/auto-libm-test-in: Add more tests of atan2, carg, clog and
	clog10.
	* math/auto-libm-test-out: Regenerated.
	* sysdeps/i386/fpu/libm-test-ulps: Update.
	* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
 2015-04-08 17:32:17 +00:00
Joseph Myers
ae63c7ebed Fix dbl-64 atan in non-default rounding modes (bug 18197). 
The dbl-64 implementation of atan does computations that expect to run
in round-to-nearest mode, and in other modes the errors can accumulate
to more than the maximum accepted 9ulp.  This patch makes it use
FE_TONEAREST internally, similar to other functions with such issues.

Tested for x86_64 and x86; no ulps updates needed.

	[BZ #18197]
	* sysdeps/ieee754/dbl-64/s_atan.c: Include <fenv.h>.
	(atan): Set FE_TONEAREST mode for internal computations.
	* math/auto-libm-test-in: Add more tests of atan.
	* math/auto-libm-test-out: Regenerated.
 2015-04-08 17:14:12 +00:00
Adhemerval Zanella
d421868bb8 powerpc: Fix incorrect results for pow when using FMA 
This patch adds no FMA generation for e_pow to avoid precision issues
for powerpc.  This fixes BZ#18104.
 2015-03-10 09:38:54 -04:00
Joseph Myers
09220e6634 Avoid uninitialized warnings in Bessel functions. 
math/Makefile currently has:

  # The fdlibm code generates a lot of these warnings but is otherwise clean.
  override CFLAGS += -Wno-uninitialized

This is of course undesirable; warnings should be disabled as narrowly
as possible.  To remove this override, we need to fix files that
generate such warnings, or put warning-disabling pragmas in them.
This patch does so for Bessel function implementations, one of the
cases that have the warnings if the override is removed.  The warnings
arise because functions set pointer variables p and q only for certain
values of the function argument, then use them unconditionally.  As
the static functions in question only get called for arguments that
satisfy the last condition in the if/else chain, the natural fix is to
change the last "else if" to just "else", which this patch does.  (The
ldbl-128 / ldbl-128ibm implementation of these functions is
substantially different and looks like it already does use "else" in
the last case in the nearest corresponding code.)

Tested for x86_64 and x86.

	* sysdeps/ieee754/dbl-64/e_j0.c (pzero): Change last case for
	setting p and q from "else if" to "else".
	(qzero): Likewise.
	* sysdeps/ieee754/dbl-64/e_j1.c (pone): Likewise.
	(qone): Likewise.
	* sysdeps/ieee754/flt-32/e_j0f.c (pzerof): Likewise.
	(qzerof): Likewise.
	* sysdeps/ieee754/flt-32/e_j1f.c (ponef): Likewise.
	(qonef): Likewise.
	* sysdeps/ieee754/ldbl-96/e_j0l.c (pzero): Likewise.
	(qzero): Likewise.
	* sysdeps/ieee754/ldbl-96/e_j1l.c (pone): Likewise.
	(qone): Likewise.
 2015-02-26 21:49:19 +00:00
Joseph Myers
ec0ce0d3be Fix asin missing underflows (bug 16351). 
Similar to various other bugs in this area, some asin implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact.  This patch forces the exception in a
similar way to previous fixes.

Tested for x86_64, x86, powerpc and mips64.

	[BZ #16351]
	* sysdeps/i386/fpu/e_asin.S (dbl_min): New object.
	(MO): New macro.
	(__ieee754_asin): Force underflow exception for results with small
	absolute value.
	* sysdeps/i386/fpu/e_asinf.S (flt_min): New object.
	(MO): New macro.
	(__ieee754_asinf): Force underflow exception for results with
	small absolute value.
	* sysdeps/ieee754/dbl-64/e_asin.c: Include <float.h> and <math.h>.
	(__ieee754_asin): Force underflow exception for results with small
	absolute value.
	* sysdeps/ieee754/flt-32/e_asinf.c: Include <float.h>.
	(__ieee754_asinf): Force underflow exception for results with
	small absolute value.
	* sysdeps/ieee754/ldbl-128/e_asinl.c: Include <float.h>.
	(__ieee754_asinl): Force underflow exception for results with
	small absolute value.
	* sysdeps/ieee754/ldbl-128ibm/e_asinl.c: Include <float.h>.
	(__ieee754_asinl): Force underflow exception for results with
	small absolute value.
	* sysdeps/ieee754/ldbl-96/e_asinl.c: Include <float.h>.
	(__ieee754_asinl): Force underflow exception for results with
	small absolute value.
	* sysdeps/x86_64/fpu/multiarch/e_asin.c [HAVE_FMA4_SUPPORT]:
	Include <math.h>.
	* math/auto-libm-test-in: Do not mark underflow exceptions as
	possibly missing for bug 16351.
	* math/auto-libm-test-out: Regenerated.
 2015-02-26 17:18:54 +00:00
Joseph Myers
4629c866ad Fix atan / atan2 missing underflows (bug 15319). 
This patch fixes bug 15319, missing underflows from atan / atan2 when
the result of atan is very close to its small argument (or that of
atan2 is very close to the ratio of its arguments, which may be an
exact division).

The usual approach of doing an underflowing computation if the
computed result is subnormal is followed.  For 32-bit x86, there are
extra complications: the inline __ieee754_atan2 in bits/mathinline.h
needs to be disabled for float and double because other libm functions
using it generally rely on getting proper underflow exceptions from
it, while the out-of-line functions have to remove excess range and
precision from the underflowing result so as to return an exact 0 in
the case where errno should be set for underflow to 0.  (The failures
I saw without that are similar to those Carlos reported for other
functions, where I haven't seen a response to
<https://sourceware.org/ml/libc-alpha/2015-01/msg00485.html>
confirming if my diagnosis is correct.  Arguably all libm functions
with float and double returns should remove excess range and
precision, but that's a separate matter.)

The x86_64 long double case reported in a comment in bug 15319 is not
a bug (it's an argument of LDBL_MIN, and x86_64 is an after-rounding
architecture so the correct IEEE result is not to raise underflow in
the given rounding mode, in addition to treating the result as an
exact LDBL_MIN being within the newly clarified documentation of
accuracy goals).  I'm presuming that the fpatan instruction can be
trusted to raise appropriate exceptions when the (long double) result
underflows (after rounding) and so no changes are needed for x86 /
x86_64 long double functions here; empirically this is the case for
the cases covered in the testsuite, on my system.

Tested for x86_64, x86, powerpc and mips64.  Only 32-bit x86 needs
ulps updates (for the changes to inlines meaning some functions no
longer get excess precision from their __ieee754_atan2* calls).

	[BZ #15319]
	* sysdeps/i386/fpu/e_atan2.S (dbl_min): New object.
	(MO): New macro.
	(__ieee754_atan2): For results with small absolute value, force
	underflow exception and remove excess range and precision from
	return value.
	* sysdeps/i386/fpu/e_atan2f.S (flt_min): New object.
	(MO): New macro.
	(__ieee754_atan2f): For results with small absolute value, force
	underflow exception and remove excess range and precision from
	return value.
	* sysdeps/i386/fpu/s_atan.S (dbl_min): New object.
	(MO): New macro.
	(__atan): For results with small absolute value, force underflow
	exception and remove excess range and precision from return value.
	* sysdeps/i386/fpu/s_atanf.S (flt_min): New object.
	(MO): New macro.
	(__atanf): For results with small absolute value, force underflow
	exception and remove excess range and precision from return value.
	* sysdeps/ieee754/dbl-64/e_atan2.c: Include <float.h> and
	<math.h>.
	(__ieee754_atan2): Force underflow exception for results with
	small absolute value.
	* sysdeps/ieee754/dbl-64/s_atan.c: Include <float.h> and
	<math_private.h>.
	(atan): Force underflow exception for results with small absolute
	value.
	* sysdeps/ieee754/flt-32/s_atanf.c: Include <float.h>.
	(__atanf): Force underflow exception for results with small
	absolute value.
	* sysdeps/ieee754/ldbl-128/s_atanl.c: Include <float.h> and
	<math.h>.
	(__atanl): Force underflow exception for results with small
	absolute value.
	* sysdeps/ieee754/ldbl-128ibm/s_atanl.c: Include <float.h>.
	(__atanl): Force underflow exception for results with small
	absolute value.
	* sysdeps/x86/fpu/bits/mathinline.h
	[!__SSE2_MATH__ && !__x86_64__ && __LIBC_INTERNAL_MATH_INLINES]
	(__ieee754_atan2): Only define inline for long double.
	* sysdeps/x86_64/fpu/multiarch/e_atan2.c
	[HAVE_FMA4_SUPPORT || HAVE_AVX_SUPPORT]: Include <math.h>.
	* math/auto-libm-test-in: Do not mark underflow exceptions as
	possibly missing for bug 15319.  Add more tests of atan2.
	* math/auto-libm-test-out: Regenerated.
	* math/libm-test.inc (casin_test_data): Do not mark underflow
	exceptions as possibly missing for bug 15319.
	(casinh_test_data): Likewise.
	* sysdeps/i386/fpu/libm-test-ulps: Update.
 2015-02-18 21:10:49 +00:00
Joseph Myers
ce8fc784e6 Fix sign of remquo zero remainder in round-downward mode (bug 17987). 
Various remquo implementations produce a zero remainder with the wrong
sign (a zero remainder should always have the sign of the first
argument, as specified in IEEE 754) in round-downward mode, resulting
from the sign of 0 - 0.  This patch checks for zero results and fixes
their sign accordingly.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #17987]
	* sysdeps/ieee754/dbl-64/s_remquo.c (__remquo): Ensure sign of
	zero result does not depend on the sign resulting from
	subtraction.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_remquo.c (__remquo):
	Likewise.
	* sysdeps/ieee754/flt-32/s_remquof.c (__remquof): Likewise.
	* sysdeps/ieee754/ldbl-128/s_remquol.c (__remquol): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_remquol.c (__remquol): Likewise.
	* sysdeps/ieee754/ldbl-96/s_remquol.c (__remquol): Likewise.
	* math/libm-test.inc (remquo_test_data): Add more tests.
 2015-02-17 00:41:50 +00:00
Joseph Myers
a820f9b3c0 Fix remquo spurious overflows (bug 17978). 
Various remquo implementations, when computing the last three bits of
the quotient, have spurious overflows when 4 times the second argument
to remquo overflows.  These overflows can in turn cause bad results in
rounding modes where that overflow results in a finite value.  This
patch adds tests to avoid the problem multiplications in cases where
they would overflow, similar to those that control an earlier
multiplication by 8.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #17978]
	* sysdeps/ieee754/dbl-64/s_remquo.c (__remquo): Do not form
	products 4 * y and 2 * y where those would overflow.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_remquo.c (__remquo):
	Likewise.
	* sysdeps/ieee754/flt-32/s_remquof.c (__remquof): Likewise.
	* sysdeps/ieee754/ldbl-128/s_remquol.c (__remquol): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_remquol.c (__remquol): Likewise.
	* sysdeps/ieee754/ldbl-96/s_remquol.c (__remquol): Likewise.
	* math/libm-test.inc (remquo_test_data): Add more tests.
 2015-02-16 22:38:28 +00:00
Joseph Myers
d9afe48d55 Fix dbl-64/wordsize-64 remquo (bug 17569). 
The dbl-64/wordsize-64 remquo implementation follows similar logic to
various other implementations, but where that logic computes some
absolute values, it wrongly uses a previously computed bit-pattern for
the absolute value of the first argument, where actually it needs the
absolute value of the first argument mod 8 times the second.  This
patch fixes it to compute the correct absolute value.

The integer quotient result of remquo is only specified mod 8
(including its sign); architecture-specific versions may well vary in
what results they give for higher bits of that result (and indeed bug
17569 gives an example correct result from __builtin_remquo giving 9
for that result, where the particular glibc implementation used in
that bug report would give 1 after this fix).  Thus, this patch adapts
the tests of remquo to test that result only mod 8, to allow for such
variation when tests with higher quotient are included.

Tested for x86_64 and x86.

	[BZ #17569]
	* sysdeps/ieee754/dbl-64/wordsize-64/s_remquo.c (__remquo):
	Compute absolute value of x as modified by fmod, not original
	value of x.
	* math/libm-test.inc (RUN_TEST_ffI_f1): Rename to
	RUN_TEST_ffI_f1_mod8.  Check extra return value mod 8.
	(RUN_TEST_LOOP_ffI_f1): Rename to RUN_TEST_LOOP_ffI_f1_mod8.  Call
	RUN_TEST_ffI_f1_mod8.
	(remquo_test_data): Add more tests.
 2015-02-13 21:54:44 +00:00