This came to light when adding hard-flaot support to ARC glibc port
without hardware sqrt support causing glibc build to fail:
| ../sysdeps/ieee754/dbl-64/e_sqrt.c: In function '__ieee754_sqrt':
| ../sysdeps/ieee754/dbl-64/e_sqrt.c:58:54: error: unused variable 'ty' [-Werror=unused-variable]
| double y, t, del, res, res1, hy, z, zz, p, hx, tx, ty, s;
The reason being EMULV() macro uses the hardware provided
__builtin_fma() variant, leaving temporary variables 'p, hx, tx, hy, ty'
unused hence compiler warning and ensuing error.
The intent of the patch was to fix that error, but EMULV is pervasive
and used fair bit indirectly via othe rmacros, hence this patch.
Functionally it should not result in code gen changes and if at all
those would be better since the scope of those temporaries is greatly
reduced now
Built tested with aarch64-linux-gnu arm-linux-gnueabi arm-linux-gnueabihf hppa-linux-gnu x86_64-linux-gnu arm-linux-gnueabihf riscv64-linux-gnu-rv64imac-lp64 riscv64-linux-gnu-rv64imafdc-lp64 powerpc-linux-gnu microblaze-linux-gnu nios2-linux-gnu hppa-linux-gnu
Also as suggested by Joseph [1] used --strip and compared the libs with
and w/o patch and they are byte-for-byte unchanged (with gcc 9).
| for i in `find . -name libm-2.31.9000.so`;
| do
| echo $i; diff $i /SCRATCH/vgupta/gnu2/install/glibcs/$i ; echo $?;
| done
| ./aarch64-linux-gnu/lib64/libm-2.31.9000.so
| 0
| ./arm-linux-gnueabi/lib/libm-2.31.9000.so
| 0
| ./x86_64-linux-gnu/lib64/libm-2.31.9000.so
| 0
| ./arm-linux-gnueabihf/lib/libm-2.31.9000.so
| 0
| ./riscv64-linux-gnu-rv64imac-lp64/lib64/lp64/libm-2.31.9000.so
| 0
| ./riscv64-linux-gnu-rv64imafdc-lp64/lib64/lp64/libm-2.31.9000.so
| 0
| ./powerpc-linux-gnu/lib/libm-2.31.9000.so
| 0
| ./microblaze-linux-gnu/lib/libm-2.31.9000.so
| 0
| ./nios2-linux-gnu/lib/libm-2.31.9000.so
| 0
| ./hppa-linux-gnu/lib/libm-2.31.9000.so
| 0
| ./s390x-linux-gnu/lib64/libm-2.31.9000.so
[1] https://sourceware.org/pipermail/libc-alpha/2019-November/108267.html
Now that ldconfig defaults to the new format (only), check for it
first. Also apply the corruption check added in commit 2954daf00b
("Add more checks for valid ld.so.cache file (bug 18093)") to the
new-format-only case.
Suggested-by: Josh Triplett <josh@joshtriplett.org>
* sysdeps/mach/hurd/Makefile [subdir=misc] (sysdep_routines): Add
writev_nocancel writev_nocancel_nostatus.
* sysdeps/mach/hurd/not-cancel.h (__writev_nocancel_nostatus): Replace
macro with function declaration (with hidden prototype in libc).
(__writev_nocancel): New function declaration (with hidden prototype in libc).
* sysdeps/mach/hurd/writev_nocancel_nostatus.c: New file.
* sysdeps/posix/writev_nocancel.c: New file, includes writev.c to make a
nocancel variant that calls __write_nocancel.
* sysdeps/posix/writev.c (writev): Do not define alias if __writev is
renamed.
and add _nocancel variants.
* sysdeps/mach/hurd/write.c (__libc_write): Call __write_nocancel
surrounded by enabling async cancel, to replace implementation moved
to...
* sysdeps/mach/hurd/write_nocancel.c (__write_nocancel): ... here.
* sysdeps/mach/hurd/pwrite64.c (__libc_pwrite64): Call
__pwrite64_nocancel surrounded by enabling async cancel, to replace
implementation moved to...
* sysdeps/mach/hurd/pwrite64_nocancel.c (__pwrite64_nocancel): ... here.
* sysdeps/mach/hurd/Makefile (sysdep_routines): Add write_nocancel and
pwrite64_nocancel.
* sysdeps/mach/hurd/not-cancel.h (__write_nocancel,
__pwrite64_nocancel): Replace macros with prototypes with a hidden proto on
libc.
* sysdeps/mach/hurd/dl-sysdep.c (__write_nocancel): New alias, check
that it is not hidden.
* sysdeps/mach/hurd/Versions (libc.GLIBC_PRIVATE): Add __write_nocancel.
(ld.GLIBC_PRIVATE): Add __write_nocancel.
* sysdeps/mach/hurd/i386/localplt.data (__write_nocancel): Add
reference.
* sysdeps/htl/stdio-lock.h: New file, registers locking cleanup to htl.
* sysdeps/htl/libc-lockP.h: Include <libc-lock.h>.
(__libc_cleanup_region_start, __libc_cleanup_end,
__libc_cleanup_region_end): Override macros from <libc-lock.h> with
versions which register cleanup to htl.
(__pthread_get_cleanup_stack): Make reference weak for skipping
registration on in the static non-libpthread case.
If libpthread gets loaded dynamically, the stack needs to already contain the
cleanup handlers of the main thread.
* htl/libc_pthread_init.c (__pthread_cleanup_stack): New per-thread variable.
* htl/Versions (libc): Add __pthread_cleanup_stack as private symbol.
* htl/pt-internal.h (struct __pthread): Remove cancelation_handlers
field.
(__pthread_cleanup_stack): Add variable declaration.
* htl/pt-alloc.c (initialize_pthread): Remove initialization of
cancelation_handlers field.
* htl/pt-cleanup.c (__pthread_get_cleanup_stack): Return the address of
__pthread_cleanup_stack instead of that of the cancelation_handlers
field.
* htl/forward.c: Include <pt-internal.h>.
(dummy_list): Remove variable.
(__pthread_get_cleanup_stack): Return the address of __pthread_cleanup_stack
instead of that of dummy_list.
* sysdeps/mach/hurd/recv.c (__recv): Make the __socket_recv call
cancellable.
* sysdeps/mach/hurd/recvfrom.c (__recvfrom): Make the __socket_recv and
__socket_whatis_address calls cancellable.
* sysdeps/mach/hurd/recvmsg.c (__libc_recvmsg): Make the __socket_recv,
__socket_whatis_address, __io_reauthenticate, and __auth_user_authenticate calls
cancellable.
Added a check to detect the CPU value in preconfigure, so that glibc is
built with the correct --with-cpu value. And move existing checks into
preconfigure.ac.
Co-Authored-By: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Co-Authored-By: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
libpthread_syms.a will contain the symbols that libc tries to get from
libpthread, to be used by the system, but also by tests.
* htl/libpthread.a, htl/libpthread_pic.a: Link libpthread_syms.a and Move EXTERN
references to...
* htl/libpthread_syms.a: ... new file. Add missing
__pthread_enable_asynccancel reference.
* htl/Makefile: Install libpthread_syms.a and link it into static tests.
Introduce an Arm MTE compatible strlen implementation.
The existing implementation assumes that any access to the pages in
which the string resides is safe. This assumption is not true when
MTE is enabled. This patch updates the algorithm to ensure that
accesses remain within the bounds of an MTE tag (16-byte chunks) and
improves overall performance on modern cores. On cores with less
efficient Advanced SIMD implementation such as Cortex-A53 it can
be slower.
Benchmarked on Cortex-A72, Cortex-A53, Neoverse N1.
Co-authored-by: Wilco Dijkstra <wilco.dijkstra@arm.com>
Introduce an Arm MTE compatible strchr implementation.
The existing implementation assumes that any access to the pages in
which the string resides is safe. This assumption is not true when
MTE is enabled. This patch updates the algorithm to ensure that
accesses remain within the bounds of an MTE tag (16-byte chunks) and
improves overall performance.
Benchmarked on Cortex-A72, Cortex-A53, Neoverse N1.
Co-authored-by: Wilco Dijkstra <wilco.dijkstra@arm.com>
Introduce an Arm MTE compatible strchrnul implementation.
The existing implementation assumes that any access to the pages in
which the string resides is safe. This assumption is not true when
MTE is enabled. This patch updates the algorithm to ensure that
accesses remain within the bounds of an MTE tag (16-byte chunks) and
improves overall performance.
Benchmarked on Cortex-A72, Cortex-A53, Neoverse N1.
Co-authored-by: Wilco Dijkstra <wilco.dijkstra@arm.com>
Falkor's memcpy and memmove share some implementation details,
therefore, the two routines are moved to a single source file
for code reuse.
The two routines now share code for small and medium copies
(up to and including 128 bytes). Large copies in memcpy do not
handle overlap correctly, consequently, the loops for
moving/copying more than 128 bytes stay separate for memcpy
and memmove.
To increase code reuse a number of small modifications were made:
1. The old implementation of memcpy copied the first 16-bytes as
soon as the size of data was determined to be greater than 32 bytes.
For memcpy code to also work when copying small/medium overlapping
data, the first load and store was moved to the large copy case.
2. Medium memcpy case no longer assumes that 16 bytes were already
copied and uses 8 registers to copy up to 128 bytes.
3. Small case for memmove was enlarged to that of memcpy, which is
less than or equal to 32 bytes.
4. Medium case for memmove was enlarged to that of memcpy, which is
less than or equal to 128 bytes.
Other changes include:
1. Improve alignment of existing loop bodies.
2. 'Delouse' memmove and memcpy input arguments. Make sure that
upper 32-bits of input registers are zeroed if unused.
3. Do one more iteration in memmove loops and reduce the number of
copies made from the start/end of the buffer, depending on
the direction of the memmove loop.
Benchmarking:
Looking at the results from bench-memcpy-random.out, we can see that
now memmove_falkor is about 5% faster than memcpy_falkor_old, while
memmove_falkor_old was more than 15% slower. The memcpy implementation
remained largely unmodified, so there is no significant performance
change.
The reason for such a significant memmove performance gain is the
increase of the upper bound on the small copy case to 32 bytes and
the increase of the upper bound on the medium copy case to 128 bytes.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
d6d74ec16 ('htl: Enable more tests') moved the linking rules from
nptl/Makefile and htl/Makefile to the shared sysdeps/pthread/Makefile. But
e.g. on powerpc some tests are added in sysdeps/powerpc/Makefile, which is
included *after* sysdeps/pthread/Makefile, and thus the tests don't get
affected by the rules and fail to link. For now let's just copy over the
set of rules in both nptl/Makefile and htl/Makefile.
* sysdeps/pthread/Makefile: Move libpthread linking rules to...
* htl/Makefile: ... here and...
* nptl/Makefile: ... there.
We really need modules to use their own pthread_atfork so that
__dso_handle properly identifies them.
* sysdeps/htl/pt-atfork.c (__pthread_atfork): Hide function.
(pthread_atfork): Hide alias.
* sysdeps/htl/old_pt-atfork.c (pthread_atfork): Rename macro to
__pthread_atfork to fix building the compatibility alias.
* sysdeps/htl/pthreadP.h: Include <link.h>
(__pthread_init_static_tls): New prototype.
* htl/pt-alloc.c (__pthread_init_static_tls): New function.
* sysdeps/mach/hurd/htl/pt-sysdep.c (_init_routine): Initialize tcb
field of initial thread. Set GL(dl_init_static_tls) to
&__pthread_init_static_tls.
and add _nocancel variants.
* sysdeps/mach/hurd/pread64.c (__libc_pread64): Call __pread64_nocancel
surrounded by enabling async cancel, to replace implementation moved to...
* sysdeps/mach/hurd/pread64_nocancel.c (__pread64_nocancel): ... here.
* sysdeps/mach/hurd/read.c (__libc_read): Call __read_nocancel surrounded by
enabling async cancel, to replace implementation moved to...
* sysdeps/mach/hurd/read_nocancel.c (__read_nocancel): ... here.
* sysdeps/mach/hurd/Makefile (sysdep_routines): Add read_nocancel and
pread64_nocancel.
* sysdeps/mach/hurd/not-cancel.h (__read_nocancel, __pread64_nocancel):
Replace macros with prototypes with a hidden proto on libc.
* sysdeps/mach/hurd/dl-sysdep.c: Include <not-cancel.h>.
(__pread64_nocancel): New alias, check that it is not hidden.
(__read_nocancel): New alias, check that it is not hidden.
* sysdeps/mach/hurd/Versions (libc.GLIBC_PRIVATE): Add __read_nocancel and
__pread64_nocancel.
(ld.GLIBC_2.1): Add __pread64.
(ld.GLIBC_PRIVATE): Add __read_nocancel and __pread64_nocancel.
* sysdeps/mach/hurd/i386/ld.abilist (__pread64): Add symbol.
* sysdeps/mach/hurd/i386/localplt.data (__read_nocancel, __pread64,
__pread64_nocancel): Add references.
* sysdeps/i386/htl/Makefile: New file.
* sysdeps/i386/htl/tcb-offsets.sym: New file.
* sysdeps/mach/hurd/i386/Makefile [setjmp] (gen-as-const-headers): Add
signal-defines.sym.
* sysdeps/mach/hurd/i386/____longjmp_chk.S: Include tcb-offsets.h.
(____longjmp_chk): Harmonize with i386's __longjmp. Clear SS_ONSTACK
when jumping off the alternate stack.
* sysdeps/mach/hurd/i386/__longjmp.S: New file.
The existing macros are fragile and expect local variables with a
certain name. Fix this by defining them as functions with default
implementation in a new header dl-runtime.h which arches can override
if need be.
This came up during ARC port review, hence the need for argument pltgot
in reloc_index() which is not needed by existing ports.
This patch potentially only affects hppa/x86 ports,
build tested for both those configs and a few more.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This started as a trivial change to Anton's rawmemchr. I got
carried away. This is a hybrid between P8's asympotically
faster 64B checks with extremely efficient small string checks
e.g <64B (and sometimes a little bit more depending on alignment).
The second trick is to align to 64B by running a 48B checking loop
16B at a time until we naturally align to 64B (i.e checking 48/96/144
bytes/iteration based on the alignment after the first 5 comparisons).
This allieviates the need to check page boundaries.
Finally, explicly use the P7 strlen with the runtime loader when building
P9. We need to be cautious about vector/vsx extensions here on P9 only
builds.
This defines the macro such that it should behave best on all
supported powerpc targets. Likewise, this allows us to remove the
ppc64le specific s_fmaf128.c.
I have verified powerpc64le multiarch and powerpc64le power9
no-multiarch builds continue to generate optimize fmaf128.
commit 7621e38bf3
Author: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Date: Tue Jan 29 17:43:45 2019 +0000
Add generic hp-timing support
removed the clock_gettime option. Restore the clock_gettime option for
some x86 CPUs on which value from RDTSC may not be incremented at a fixed
rate.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
commit e9698175b0
Author: Lukasz Majewski <lukma@denx.de>
Date: Mon Mar 16 08:31:41 2020 +0100
y2038: Replace __clock_gettime with __clock_gettime64
breaks benchtests with sysdeps/generic/hp-timing.h:
In file included from ./bench-timing.h:23,
from ./bench-skeleton.c:25,
from
/export/build/gnu/tools-build/glibc-gitlab/build-x86_64-linux/benchtests/bench-rint.c:45:
./bench-skeleton.c: In function ‘main’:
../sysdeps/generic/hp-timing.h:37:23: error: storage size of ‘tv’ isn’t known
37 | struct __timespec64 tv; \
| ^~
Define HP_TIMING_NOW with clock_gettime in sysdeps/generic/hp-timing.h
if _ISOMAC is defined. Don't define __clock_gettime in bench-timing.h
since it is no longer needed.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
There are:
#define TUNABLE_SET_VAL_IF_VALID_RANGE(__cur, __val, __type) \
({ \
__type min = (__cur)->type.min; \
__type max = (__cur)->type.max; \
\
if ((__type) (__val) >= min && (__type) (val) <= max) \
^^^ Should be __val
{ \
(__cur)->val.numval = val; \
^^^ Should be __val
(__cur)->initialized = true; \
} \
})
Luckily since all TUNABLE_SET_VAL_IF_VALID_RANGE usages are
TUNABLE_SET_VAL_IF_VALID_RANGE (cur, val, int64_t);
this didn't cause any issues.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
When detecting hole support, we write at 16MiB, and filesystems will
typically need two levels of data to record that. On filesystems with
8KB block, the two indirection blocks will require a total of 16KB
overhead, thus 32 512-byte sectors.
Spotted on GNU/Hurd with a 4KB blocks filesystem, but also happens on Linux
with 4KB or 8KB blocks filesystems.
* support/support_descriptor_supports_holes.c
(support_descriptor_supports_holes): Set block_headroom to 32.
The build uses an undefined macro evaluation for fmaf128 build.
For now set USE_FMAL_BUILTIN and USE_FMAF128_BUILTIN to 0.
Checked with a build for:
powerpc64le-linux-gnu-power9-disable-multi-arch
powerpc64le-linux-gnu-power9
powerpc64le-linux-gnu
powerpc64-linux-gnu-power8
powerpc64-linux-gnu
powerpc-linux-gnu-power4
powerpc-linux-gnu
