This patch adds a new feature for powerpc. In order to get faster
access to the HWCAP3/HWCAP4 masks, similar to HWCAP/HWCAP2 (i.e. for
implementing __builtin_cpu_supports() in GCC) without the overhead of
reading them from the auxiliary vector, we now reserve space for them
in the TCB.
Suggested-by: Peter Bergner <bergner@linux.ibm.com>
Reviewed-by: Peter Bergner <bergner@linux.ibm.com>
(cherry picked from commit 3ab9b88e2a)
Originally, nptl/descr.h included <sys/rseq.h>, but we removed that
in commit 2c6b4b272e ("nptl:
Unconditionally use a 32-byte rseq area"). After that, it was
not ensured that the RSEQ_SIG macro was defined during sched_getcpu.c
compilation that provided a definition. This commit always checks
the rseq area for CPU number information before using the other
approaches.
This adds an unnecessary (but well-predictable) branch on
architectures which do not define RSEQ_SIG, but its cost is small
compared to the system call. Most architectures that have vDSO
acceleration for getcpu also have rseq support.
Fixes: 2c6b4b272e
Fixes: 1d350aa060
Reviewed-by: Arjun Shankar <arjun@redhat.com>
(cherry picked from commit 7a76f21867)
The following patch uses the GCC 14 __builtin_stdc_* builtins in stdbit.h
for the type-generic macros, so that when compiled with GCC 14 or later,
it supports not just 8/16/32/64-bit unsigned integers, but also 128-bit
(if target supports them) and unsigned _BitInt (any supported precision).
And so that the macros don't expand arguments multiple times and can be
evaluated in constant expressions.
The new testcase is gcc's gcc/testsuite/gcc.dg/builtin-stdc-bit-1.c
adjusted to test stdbit.h and the type-generic macros in there instead
of the builtins and adjusted to use glibc test framework rather than
gcc style tests with __builtin_abort ().
Signed-off-by: Jakub Jelinek <jakub@redhat.com>
Reviewed-by: Joseph Myers <josmyers@redhat.com>
(cherry picked from commit da89496337)
Starting with commit e57d8fc97b
"S390: Always use svc 0"
clone clobbers the call-saved register r7 in error case:
function or stack is NULL.
This patch restores the saved registers also in the error case.
Furthermore the existing test misc/tst-clone is extended to check
all error cases and that clone does not clobber registers in this
error case.
(cherry picked from commit 02782fd128)
For o32 we need to setup a minimal stack frame to allow cprestore
on __thread_start_clone3 (which instruct the linker to save the
gp for PIC). Also, there is no guarantee by kABI that $8 will be
preserved after syscall execution, so we need to save it on the
provided stack.
Checked on mipsel-linux-gnu.
Reported-by: Khem Raj <raj.khem@gmail.com>
Tested-by: Khem Raj <raj.khem@gmail.com>
(cherry picked from commit bbd248ac0d)
The commit 49d877a80b (arm: Remove
_dl_skip_args usage) removed the _SKIP_ARGS literal, which was
previously loader to r4 on loader _start. However, the cleanup did not
remove the following 'ldr r4, [sl, r4]' on _dl_start_user, used to check
to skip the arguments after ld self-relocations.
In my testing, the kernel initially set r4 to 0, which makes the
ldr instruction just read the _GLOBAL_OFFSET_TABLE_. However, since r4
is a callee-saved register; a different runtime might not zero
initialize it and thus trigger an invalid memory access.
Checked on arm-linux-gnu.
Reported-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
(cherry picked from commit 1e25112dc0)
Starting with commits
- 7ea510127e
string: Add libc_hidden_proto for strchrnul
- 22999b2f0f
string: Add libc_hidden_proto for memrchr
building glibc on s390x with --disable-multi-arch fails if only
the C-variant of strchrnul / memrchr is used. This is the case
if gcc uses -march < z13.
The build fails with:
../sysdeps/s390/strchrnul-c.c:28:49: error: ‘__strchrnul_c’ undeclared here (not in a function); did you mean ‘__strchrnul’?
28 | __hidden_ver1 (__strchrnul_c, __GI___strchrnul, __strchrnul_c);
With --disable-multi-arch, __strchrnul_c is not available as string/strchrnul.c
is just included without defining STRCHRNUL and thus we also don't have to create
the internal hidden symbol.
Tested-by: Andreas K. Hüttel <dilfridge@gentoo.org>
Simplify the advisory format by dropping the -Backport tags and instead
stick to using just the -Commit tags. To identify backports, put a
substring of git-describe into the release version in the brackets next
to the commit ref. This way, it not only identifies that the fix (or
regression) is on the release/2.YY/master branch, it also disambiguates
regressions/fixes in the branch from those in the tarball.
Add a README to make it easier for consumers to understand the format.
Additionally, the Release wiki needs to be updated to inform the release
manager to:
1. Generate a NEWS snipped from the advisories directory
AND
2. on release/2.YY/master, replace the advisories directory with a text
file pointing to the advisories directory in master so that we don't
have to update multiple locations.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Andreas K. Hüttel <dilfridge@gentoo.org>
__vsyslog_internal calculated a buffer size by adding two integers, but
did not first check if the addition would overflow. This commit fixes
that.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
__vsyslog_internal used the return value of snprintf/vsnprintf to
calculate buffer sizes for memory allocation. If these functions (for
any reason) failed and returned -1, the resulting buffer would be too
small to hold output. This commit fixes that.
All snprintf/vsnprintf calls are checked for negative return values and
the function silently returns upon encountering them.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
__vsyslog_internal did not handle a case where printing a SYSLOG_HEADER
containing a long program name failed to update the required buffer
size, leading to the allocation and overflow of a too-small buffer on
the heap. This commit fixes that. It also adds a new regression test
that uses glibc.malloc.check.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This change relicenses the IBM portions of resolv/base64.c and
resolv/res_debug.c to a new license that does not have use-limited
patent language. The top-level LICENSE file is updated with the
license.
The relicensing was approved by IBM.
Signed-off-by: Brad Topol, IBM Director of Open Technologies <btopol@us.ibm.com>
Signed-off-by: Richard Fontana <rfontana@redhat.com>
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
On the summary page the order of the function arguments was reversed, but it is
in correct order in the other places of the manual.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The increased malloc subsystem usage is a side effect of
commit d2123d6827 ("elf: Fix slow tls
access after dlopen [BZ #19924]").
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
For ports that use the default memset, the compiler might generate early
calls before the stack protector is initialized (for instance, riscv
with -fstack-protector-all on _dl_aux_init).
Checked on riscv64-linux-gnu-rv64imafdc-lp64d.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
In qsort_r we allocate a buffer sized QSORT_STACK_SIZE (1024) on stack
and we intend to use it if all elements can fit into it. But there is a
typo:
if (total_size < sizeof buf)
buf = tmp;
else
/* allocate a buffer on heap and use it ... */
Here "buf" is a pointer, thus sizeof buf is just 4 or 8, instead of
1024. There is also a minor issue that we should use "<=" instead of
"<".
This bug is detected debugging some strange heap corruption running the
Ruby-3.3.0 test suite (on an experimental Linux From Scratch build using
Binutils-2.41.90 and Glibc trunk, and also Fedora Rawhide [1]). It
seems Ruby is doing some wild "optimization" by jumping into somewhere
in qsort_r instead of calling it normally, resulting in a double free of
buf if we allocate it on heap. The issue can be reproduced
deterministically with:
LD_PRELOAD=/usr/lib/libc_malloc_debug.so MALLOC_CHECK_=3 \
LD_LIBRARY_PATH=. ./ruby test/runner.rb test/ruby/test_enum.rb
in Ruby-3.3.0 tree after building it. This change would hide the issue
for Ruby, but Ruby is likely still buggy (if using this "optimization"
sorting larger arrays).
[1]:https://kojipkgs.fedoraproject.org/work/tasks/9729/111889729/build.log
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
The small counts copy bytes comparsion should be unsigned (as the
memmove size argument). It fixes string/tst-memmove-overflow on
sparcv9, where the input size triggers an invalid code path.
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
Similar to sparc32 fix, remove the unwind information on the signal
return stubs. This fixes the regressions:
FAIL: nptl/tst-cancel24-static
FAIL: nptl/tst-cond8-static
FAIL: nptl/tst-mutex8-static
FAIL: nptl/tst-mutexpi8-static
FAIL: nptl/tst-mutexpi9
On sparc64-linux-gnu.
It turns out that the replacement of datetime.datetime.utcnow(), for a
warning produced early in running build-many-glibcs.py with Python
3.12, (a) wasn't complete (there were other uses elsewhere in the
script also needing updating) and (b) broke reading of build-time from
build-state.json, because an aware datetime was written out including
+00:00 for the timezone, which was not expected by the strptime call.
Fix the first by making the change to
datetime.datetime.now(datetime.timezone.utc) for all the remaining
utcnow() calls. Fix the second by using strftime with an explicit
format instead of just str() when formatting build times for
build-state.json and and email subjects, and then setting the timezone
explicitly when reading from build-state.json. (Other uses, in
particular messages output by the bot, continue to use str() as the
precise format should not matter in those cases; it shouldn't actually
matter for email subjects either but it seems a good idea to keep
those short.)
Tested with a bot-cycle run and checking the format of times in
build-state.json afterwards.
The FPU used by LEON does not preserve NaN payload. This change allows
the math/test-*-canonicalize tests to pass on LEON.
Signed-off-by: Daniel Cederman <cederman@gaisler.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Use the math_force_eval() macro to force the calculation to complete and
raise the exception.
With this change the math/test-fenv test pass.
Signed-off-by: Daniel Cederman <cederman@gaisler.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Conversions from a float to a long long on SPARC v8 uses a libgcc function
that may not raise the correct exceptions on overflow. It also may raise
spurious "inexact" exceptions on non overflow cases. This patch fixes the
problem in the same way as for RV32.
Signed-off-by: Daniel Cederman <cederman@gaisler.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The functions were previously written in C, but were not compiled
with unwind information. The ENTRY/END macros includes .cfi_startproc
and .cfi_endproc which adds unwind information. This caused the
tests cleanup-8 and cleanup-10 in the GCC testsuite to fail.
This patch adds a version of the ENTRY/END macros without the
CFI instructions that can be used instead.
sigaction registers a restorer address that is located two instructions
before the stub function. This patch adds a two instruction padding to
avoid that the unwinder accesses the unwind information from the function
that the linker has placed right before it in memory. This fixes an issue
with pthread_cancel that caused tst-mutex8-static (and other tests) to fail.
Signed-off-by: Daniel Cederman <cederman@gaisler.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On LEON, if the stfsr instruction is immediately following a floating-point
operation instruction in a running program, with no other instruction in
between the two, the stfsr might behave as if the order was reversed
between the two instructions and the stfsr occurred before the
floating-point operation.
Add a nop instruction before the stfsr to prevent this from happening.
Signed-off-by: Daniel Cederman <cederman@gaisler.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Macros for using inline assembly to access the fp state register exists
in both fenv_private.h and in fpu_control.h. Let fenv_private.h use the
macros from fpu_control.h
Signed-off-by: Daniel Cederman <cederman@gaisler.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
