When MSVC supports ref-qualified members, we need to ensure that
qstring_compat.cpp can see the non-qualified definitions in qstring.h,
which means no precompiled header.
Alternatively, for a bootstrapped build we could not compile
qstring_compat.cpp or #ifndef the functions.
Change-Id: I8ece34503060f0b4b0f8f2df2fb9b0fb1311e269
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This variable works like CLEAN_DEPS, but applies to the distclean target.
Change-Id: Ia30e8932b9acd6529298728dd5d0e038b0208d66
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In release configs qmake sets DebugInformationFormat to None.
If ProgramDataBaseFileName is left unset, then VS 2012 will always
rebuild the complete project. Therefore, qmake now inserts an empty
ProgramDataBaseFileName tag if DebugInformationFormat is None.
Task-number: QTBUG-35570
Change-Id: Ifb91b0bbcf6614621bfe3b12429e2624bd16e77a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
VS 2010 doesn't denote "no debug info" as "None" but as empty tag.
This fixes a regression introduced by
7c3efdfb6a.
[ChangeLog][qtbase][qmake] fix VS 2010 project file generation
Task-number: QTBUG-35610
Change-Id: I18ae69a842d0b679a781f8d24c026d422da3a857
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Assume that C and C++ headers found in system paths will not change,
so we don't need to tell Make about them, nor do we need to scan their
contents either.
The previous qmake behavior matched gcc's -M switch; it now matches
the -MM switch:
-M Instead of outputting the result of preprocessing, output a
rule suitable for make describing the dependencies of the
main source file.
-MM Like -M but do not mention header files that are found in
system header directories, nor header files that are
included, directly or indirectly, from such a header.
This goes hand-in-hand with our use of -isystem to pass system paths
to the compiler.
Change-Id: I3346b6da496fe6495ac89c5286d066b343116f0e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This commit will make qmake use -isystem automatically for any
compilers that declare support for it for any paths that are listed in
QMAKE_DEFAULT_INCDIRS.
Change-Id: I36fefc6d5bba61671f65669f0ea42704b3c3cf31
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Do not include the project file twice or other
.pr? files outside the project tree.
Task-number: QTBUG-21910
Change-Id: I62af842282ccdc5b9099d9227d5395ebe3f0698c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Commit 773dd01 introduced a general mingw platform scope, which
is cleaner and more flexible than matching the spec name.
Change-Id: Ie3a9cb791a83f7c8a51bc4e23069190c452ab521
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a preparation step for 'make dist' target for subdir projects.
UnixMakefileGenerator needs these variables while extending
writeSubTargets() and writeDefaultVariables() for 'make dist'.
Partial cherry-pick of
https://qt.gitorious.org/qt/jpnurmi-qt/commit/8c4ef19
Task-number: QTBUG-21910
Change-Id: I02a616a98448bc3041ef0f4fd034bfb4c2199e41
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it leads to pathological cases where the number of loop iterations may
go way beyond the reasonable.
this means that users need to avoid using the = operator in alternative
branches that lead to different sources/subdirectories being included
into the project. this is a bit of a corner case anyway, as people
usually add directly to SOURCES/SUBDIRS.
Task-number: QTCREATORBUG-1595
Change-Id: I7783e318fbc2790f6a853ba4e3f4a12db881feb5
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/30bd7fcce1aef974f6af9eaa6532aa1f2b6192d2)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
some qt prfs use this variable, so better set it it to avoid some noise.
Change-Id: I606c88dd7664b1cd8b490d60badd5c6bf80fd1c9
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
(cherry picked from qtcreator/e64cc71194cbe283dfe9bd2cd688f01fcdcadf34)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In the case of multiple VS installations, a static variable wasn't
initialized. That led to wrong values in subsequent calls of the
detection function.
[ChangeLog][qtbase][qmake] fix detection for multiple VS installations
Task-number: QTBUG-35530
Change-Id: I3fc23bc99679fff640f39578a7074d16fe923334
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Those libraries are contained in QMAKE_LIBS_CORE and
GetSpecialFolderPath() is present in all supported versions.
Change-Id: Iae40714e0f234625b063aeb50e29fc79c4aaa6ea
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this pretty surprising behavior would interfere with building the
examples from an installed qt tree with qmakes from other qt builds.
.qmake.conf (and .qmake.cache) files provide a possibility to explicitly
"anchor" project roots, so there is no point in having a second, even
more magic way to do it.
Task-number: QTBUG-35485
Change-Id: I8fd4fda67cabafdf55e7a98282dcdfaffb4a405e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
This adds the required members to allow setting the SDK version, and uses
them when creating WinRT projects.
Task-number: QTBUG-35328
Change-Id: I500ea77c41e27cbcc850462034c0eba8c5d1f124
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
When creating a MSVC project file for WinRT/WinPhone, the package
manifest and all referenced icons should be automatically added as
content items.
Task-number: QTBUG-35328
Change-Id: Id7f34388c5ba6746392ddadbb795ef47bef34af6
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Visual Studio will default to generating metadata, even if it is not
written to the vcproj. Since there is no metadata file, the build will
fail. This change keeps a saner default for this option when generating
WinRT project files.
Task-number: QTBUG-35328
Change-Id: Ie693e270ef0b9d9677d53af0c60905f048235bc5
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Some cross-compiling mkspecs may require a different MSVC version than
the one found in the path (or the default version). This change allows
the preferred MSVC version to be selected from the mkspec's MSVC_VER
variable when found.
Task-number: QTBUG-35328
Change-Id: I19e03101e3921dfd5026421aef4630e11b9f131e
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Right now, the sublib targets, if any, show up between clean and
distclean targets. That's silly.
I doubt anyone is using sublib targets anyway, but...
Change-Id: I2beffc69f68fa7626ff4aa4a7cc1169b2c6c69a7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
- thread was duplicated
- x86 & ppc are obsolete and don't actually do anything
- incremental was just plain nonsense (it does something entirely
different, and it's better to hide this "feature" from public view)
- resources is basically an implementation detail (it's on by default if
qtcore is used)
Change-Id: I9163af6e8db7988382ccf993d4be280f7faec1f2
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
while the dependencies in the manual projects are crappy anyway, it is
still worth to cover the case of the user changing the install paths.
Change-Id: I0a7ca5c8ba660c689d6d7af6b65d878390d6456f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Done-with: Leena Miettinen <riitta-leena.miettinen@digia.com>
Change-Id: I1e031402bc3d857cf29782957e5340e3c82f1ed2
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
This is the first step in implementing an in-place conversion of QString
to QByteArray. This requires ref-qualifiers in member functions so we
know that we have an rvalue QString.
Converting from UTF-16 to Latin1 always requires half the memory.
For conversion from UTF-16 to UTF-8, the typical string will also need
the same memory or less: characters from U+0000 to U+007F consume one
fewer byte; characters from U+0080 to U+07FF and from U+10000 to
U+1FFFFF occupy the same space in UTF-8 and UTF-16; it's only the ones
from U+0800 to U+FFFF that consume more space in the UTF-8 string.
For the locale's 8-bit codec, we can't be sure and the code (currently)
needs to go through QTextCodec anyway.
This requires a #define set before #include'ing "qstring.h". However,
since qstring.h is included by the QtCore PCH, we need an extra qmake
compiler without the PCH flags to compile this .cpp.
After this change, the distribution of calls in QtCore, Network, Gui,
and Widgets is as follows:
const & &&
toUtf8 31 (74%) 11 (26%)
toLatin1 79 (77%) 24 (23%)
toLocal8Bit 26 (16%) 138 (84%)
Change-Id: Idd96f9ddb51b989bc59f6da50054dd10c953dd4f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The default values for PCH, the -ZW switch, and CharacterSet aren't
ideal for WinRT projects, so adjust these accordingly.
Task-number: QTBUG-35328
Change-Id: I78021d0785fa84e15b1f17264daa599a9418f92e
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the respective code was removed in 375edf7
Change-Id: Ie31ef4bc8970b5396f50f1c4963f378df816242a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it's bogus in the first place that the meta files contain windows paths,
but straightening that out is a prohibitive effort. so instead generate
additional s/// commands which take care of these paths.
fwiw, the generated s///i command is a gnu extension. but as we are
doing this on windows only where we are using our built-in sed command
anyway, this should be fine.
Task-number: QTBUG-33794
Change-Id: I46fcc598db12816ee56b5371ab184f6277eb3a22
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Otherwise the 'Wrapper' destination of the PBXCopyFilesBuildPhase
will be empty, and the files end up outside of the application
bundle.
Task-number: QTBUG-34457
Change-Id: I799db28185a6c5d3d940602914fd8ba14c538bf2
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Link to "Getting started with qmake" was invalid
Task-number: QTBUG-34749
Change-Id: I782dc99f5182f2fe7661377eb82f35ebb50a46cf
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
let the compiler use qmake.pdb, as the linker will.
Change-Id: Ifafdfeff5a7d0ea91d796f76fbdc018c87cf8b78
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this avoids the nasty and conflicting vcXX0.pdb files in the build dirs.
VS will already do that.
Change-Id: I7bddaecf3f478edc78cd6654b5a1038db4fe04ff
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
that means further detaching the generation and installation of debug
info from the thing calling itself A Debug Build.
Task-number: QTBUG-32412
Change-Id: I4d79d1ae4806c8e4a2d6a7ccd030fb88385dd7d4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the restriction to dlls is entirely unjustified.
Change-Id: Ia518dd16189572dea9e8f4280c88801b1393694e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this option suppresses the installation of target (leaving only
dlltarget). however, it still installed target's pdb file.
Change-Id: Ia686a647c101ca66e74944d23171e120fc74515a
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
QString::replace() has no way of escaping capture group references,
so simply disarm double backslashes. of course this is broken, but
we'd need to reimplement it from scratch to fix it properly. "corner
case" ...
Change-Id: I357fbfd22c9c4a68809e5af6efad1de3a95706b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In XCode only the pro file was shown in the Supporting Files group as
it was the first one in the list. The others were not shown as it was
recreating the temporary QStringList each time instead of appending to
it.
Change-Id: Ifbc40a25156cf639eaa34b410f534726c41b6232
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
In particular this triggers in some cases of package building
where we are using a Qt version which for some reason has
forward slashes in its install prefix. Any mkdir command
run with this Qt build will fail because only backslashes are
recognized as path separators.
Task-number: QTBUG-34886
Change-Id: I2f957c6d348852ec555a67a35ae39921523b7b3e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Starting with MSVC2013, a separate set of libs for Windows Store apps is
supplied, so make sure it is in the LIBPATH (and before the desktop libs).
Change-Id: I74f3f385c2db749010fbfe7e2d4c3d1228e4e603
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
unlike .qmake.cache & co., the presence of this file has no magic
effects on where mkspecs, modules and other things are searched.
as the obvious name "cache" is of course already taken, we call it
"stash".
the file is searched up to the super cache (if present), otherwise up to
the normal cache/conf (if present), otherwise up to the root.
if it's not found, it is created next to the super cache (if present),
otherwise next to the cache/conf (if present), otherwise in the current
output directory.
note that the cache really should be created and populated by the
top-level project if there are subprojects: otherwise, if there is an
"anchor" (super/cache/conf), subprojects would race for updating the
cache and make a mess. without an "anchor", each subproject would just
create its own cache, kind of defeating its purpose. this is no
different from the existing "cache", but it's worth mentioning that
removing the "anchoring" function does not remove the "nesting order"
constraint.
Task-number: QTBUG-31340
Change-Id: I786d40cef40d14582a0dd4a9407863001bec4c98
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
otherwise, if the output dir is the root, the path would be denormalized.
the code for finding existing files already does that.
Change-Id: I56d70477e9c9ffcd936325068624a84df10ffd87
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In 5.2, the HTML output is in a flatter structure and when they are
hosted in qt-project.org/doc, the documentation will be found at
http://qt-project.org/doc/qt-$QT_VER
The url variable is used by projects outside of Qt 5 which need
to link to Qt 5 documentation, such as Qt Creator.
Task-number: QTBUG-34584
Change-Id: Ifa55fcd9e402b0e184a41e316340e46aeb7101de
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
there is no point in setting the variables already when peeking into
the caches, as that is done in a separate evaluator anyway.
it also makes no sense to have them set while loading the spec itself,
as it's not permitted to do anything with the caches.
so set them at the next convenient point, which is right before actually
loading the caches.
Change-Id: I3717ddf94353dc04e12c52e542f16ed27b578e14
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Warn the user if QMAKE_INFO_PLIST is set, but file not found.
An iOS application will not run or deploy without an
Info.plist present, and the error message given by
xcodebuild is not very informative.
Change-Id: I54f0e06de320a43c9f3261fe88761c41e3ccd022
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
On machines where multiple versions of VS are installed, the VS version
for the vc(x)proj generator is selected by the entries in the PATH
variable. The first VS installation that's found in PATH is used.
The former logic printed a warning if multiple VS installations were in
PATH and also fell back to the lowest version if a VS version was
registered with multiple install paths.
That's the case for VC 2012 express and prevented its usage.
Task-number: QTBUG-34357
Change-Id: Ia5c66a1aea0c40e4b7460b3aa6c7daee6673da44
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
But still fall back to 'com.yourcompany', just like Xcode does for the
initial launch.
Change-Id: I89afadefafc254a0014aca197741d42a0199943e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If QMAKE_INFO_PLIST is set, check if the file it
points to is located inside the project source dir
rather than the build dir.
Change-Id: I6fb176349dae8e841b5e2dfdb9f9cb87f51a1e76
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Previously, the full path to the qmake project file was specified as the
key for projGuids when inserting the project GUID into this hash table.
The only place that items are inserted into projGuids is in
VcprojGenerator::collectDependencies at:
projGuids.insert(val.first, newDep->target);
In this case, val.first contains the full path for the given project being
processed at this point. (e.g.: c:\testproject\testproject.pro)
Further in sln/vcproj generation, projGuids is queried with the contents
of <TARGET>.depends so that users may specify another qmake project as a
dependency for a given target.
This occurs in two places, in two ways:
1) In VcprojGenerator::collectDependencies() at:
QString depend = dep.toQString();
if (!projGuids[depend].isEmpty()) {
...
In this case QString depend contains whatever is put into <TARGET>.depends.
Typically this is the plain name of the project you depend on.
(e.g.: testproj)
2) In VcprojGenerator::writeSubDirs(QTextStream &t) by proxy of
extraSubdirs which is a QStringList of the project depends should the
mapping in case 1 fail.
This case works much like the above case, attempting to use each
QString entry of the extraSubdirs list as a key in projGuids.
If either of the above two attempts are successful, the msvc solution is
configured in a way that creates a project dependency, ensuring correct
compilation order and other related behavior.
The fix here stores the target project (e.g.: testproject) as opposed to the
full project path, as that is what is expected in the <TARGET>.depends
statements contained in the qmake project.
Change-Id: Iee05661a64d7a3e4467c5ade48d801fbbfe981b5
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Chris Gilbert <cgilbert@knaldtech.com>
In VS 2010 and newer the /SAFESEH linker option is not passed as
additional option but is represented by the property
ImageHasSafeExceptionHandlers.
Task-number: QTBUG-34392
Change-Id: I3bd19078e695716050dd20736b6bc589bcb1cefd
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Xcode resolves dependencies at the beginning of each target, so if a
Qt preprocessor such as moc or rcc updates a cpp file Xcode will not
rebuild the cpp file until the next build.
We solve this by moving the Qt proceprocesor handling to a separate
aggregate build tool target, which the main application target then
depends on.
Change-Id: I8f9225b9603dc5f279b1cb60976fe709bd97963e
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Allows project files or mkspecs to call qmake recursively using system()
with the right arguments, which we use to fix the ios default_post.prf.
Change-Id: I90d69e2b156bb0f0af1279188b11f81c84c24fb8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The fallback value is an empty string anyways.
Change-Id: I77a2d3ad275321cb8b2e059fb6359f921cbc697c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Add qjson* implementation files from corelib/json
to the qmake build. Add a read-only compile mode,
enabled by defining QT_JSON_READONLY.
Add qmake built-in function parseJson(file, into)
which parses a json file into the given variable.
qmake uses a flat key -> value-list implementation
for storing variables, which means that some hackery
is need to represent arbitrarily nested JSON. Use a
special "_KEYS_" variable for arrays and objects:
Arrays:
["item1", "item2"]
$${array._KEYS_} -> 0 1 2
$${array.0} -> "item1"
$${array.1} -> "item2"
Objects:
{ "key1" : "value1", "key2" : "value2" }
$${object._KEYS_} -> key1 key2
$${object.key1} -> value1
$${object.key2} -> value2
Change-Id: I0aa2e4e4ae14fa25be8242bc16d3cffce32504d2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Non-framework builds would automatically link to whatever Qt library
matched the config at the time of running qmake, eg hard-coded to
libQtCore_debug, while Xcode itself allowed the user to switch between
release and debug configurations.
We now append an Xcode settings variable to the library path, which gets
resolved at build time depending on the current config in Xcode.
Change-Id: I12873e38a28d9595ef3fd0ae0ad849e6744833a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
the problem is that there is no sed command on windows ... so build it
into qmake and invoke that from the generated makefiles. cmake does the
same, after all. ^^
Task-number: QTBUG-33794
Change-Id: Ib7077e18acbc5edd79f714c5779a5ed31ea6c093
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Allows the macx-xcode mkspec to be a wrapper around other mkspecs.
Since QMAKESPEC can now be set in the spec, we have to ensure not
to append to QMAKESPEC.
Change-Id: Idf33ff38147f14c488f14b426c02d9a739fdaecf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The Xcode generator does not support exclusive builds, but still
generates projects that contain both debug and release configurations,
each with hard-coded differences such as whether or not to strip or
to generate debug symbols.
As a stop-gap solution we allow projects and mkspecs to add extra
settings that are limited to a given build. Long term we want to
rewrite the Xcode generator to support exclusive builds, but that
is a much bigger task.
Change-Id: I85056164bb1b3c8c6e0cf66410348cca7138eca5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Shared between UNIX and Win generators, and allows prfs after
default_post to rely on sane TARGET and DESTDIR values.
This allows us to clean up the DESTDIR logic in testcase.prf,
which was completely busted. Doing the two in separate commits
is unfortunately not possible as the old testcase.prf logic
was so broken it would barf if only looked at.
Change-Id: Ibf21216195c760ee46ae679c162b207b77a9d813
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Exclusive builds uses setExtraConfigs to apply the particular CONFIG
of each build pass. Unfortunately we were not applying these extra
configs early enough in QMakeEvaluator::visitProFile() for them to
be picked up/usable by default_pre, something that can be useful.
Change-Id: I423a4688250a15f0c1a2cc65a48f0bbc14ad4497
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The extra variables only need to be applied once, when we
are loading the pro file (and hence are loding pre files),
not for every single pri/prf that's loaded as a result of that
(which do not load pre files themselves).
Change-Id: I3118694a8eeccf2dc32c4f62df754033fad13528
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It has no effect when the compiler doesn't support it.
Task-number: QTBUG-33952
Change-Id: I23b1fcdf4ec31924b1b59987846f7e0fbf17c6c9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allows us to have scoped variables such as eg FOO[arch=armv7].
We could quote all variables, but Xcode doesn't, and we try to stay
close to the native behavior.
Change-Id: Ia6634a33e42031fe7e69c4f680803fa347e5de4a
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
ARGS already exists, but is a flattened list of the arguments, so both
foo(bar, baz) and foo(bar baz) will give count(ARGS, 2), making it
unreliable for validating arguments to qmake functions.
Change-Id: I0bcc16614c64000169431327da48fd1a26708e67
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
A bunch of empty and never-to-be-used directories makes the build tree
noisy and harder to navigate.
Change-Id: Iebef91c82d58a8d6a0047fb5439d50eb6806f557
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
There was a mismatch of how we sanitized paths for dependencies of the
target and how those dependencies were sanitized (or not sanitized),
resulting in the target depending on 'some/path/foo.o' while the
extra compiler target was named 'some/path//foo.o', with an extra
slash. This confused 'make' enough to decide that it didn't know
how to build the dependencies for the target.
Change-Id: I181b86c291286cbbbb1f7b4c3b929a5f1dc163a3
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The pattern ${QMAKE_ needs to be at the beginning of the line, or not
start with a $ (which would make it a regular qmake variable).
Also, it's fine that the variable is of the QMAKE_VAR_foo type, as
these variables are resolved at generator time, but are constant
and do not depend on the inputs. This means we have to replace
extra variables in the output.
Change-Id: I21ad24ae770f2137e2d5d92a20ee54e2f3f4ca06
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Platform specific qmakespec needs to enable: autogen_wmappmanifest and winphone. Manifest will be generated once and only for the application template.
The Manifest will generated from following variables:
* PRODUCTID - the GUID (application specific)
* PUBLISHERID - GUID (publisher specific)
* TARGET - short application name (executable)
* AUTHOR
* PUBLISHER
* DESCRIPTION - application description
Change-Id: I225c24dc256c57451775e37658080e88b842a7d8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The user needs to specify the DEPLOYMENT variable. The syntax
is the same as previously used for DEPLOYMENT. For more info
please refer to the qmake documentation. The change adds
a new itemgroup, "Deployment Files". All files in this
itemgroup are marked as DeploymentContent and are then
packaged with the application either as XAP or the WinRT
specific file format.
Change-Id: Icf85887287c1c97eb782704340eaa3f8dde6719e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In order to be able to use the linker's /WINMD
and /WINMDFILE options
Change-Id: I2673e20aa073c6b807e8c9f191fd408c7976efc4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The change adds a new ItemGroup with a single library reference:
platform.winmd.
Change-Id: I0c7f4c46654b520afb79b6c6f49b5f2d1af400d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
It's a generic way to configure the Visual Studio Solution
architecture. It's added to support different project
architectures, ARM specifically. It may be a good idea
to replace the Win32 and x64 with VCPROJ_ARCH=Win32
and VCPROJ_ARCH=x64 defined in corresponding qmakespecs.
Change-Id: I9b23f7393bf248a629c425187d6dd8859092c45c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qmakespec for either WinRT or WinPhone have to specify
QMAKE_PLATFORM with winrt and/or winphone.
Change-Id: I87e0063881e6edd65de14adb006949247ce49904
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The Xcode generator relies on the generic makefile generator for extra
compilers such as qrc and moc, by generating makefiles that are then
executed as separate build steps in the Xcode build.
These makefiles are generated by entering a special mode in the Xcode
generator, in which case we _do_ want to resolve dependencies, so that
e.g. the files referenced inside a qrc file are added as dependencies
to the makefile rule that generates the qrc-cpp file.
Change-Id: I96bdcb165e9774a6328ae1980986fa2c6b00c6d9
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
qmake manual needs to be able to link to pages in qtdoc module,
for example, to information about Third Party Libraries.
Change-Id: I6ccaa0c3aecc54bd5d76c6b1573c797423048207
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
When building a project in VS then it would cause a rebuild
under certain situations even though a rebuild is not
actually required.
The root problem exists in VS in the following configuration:
1. A file has a custom build tool specified
2. The custom build tool has additional dependencies
3. The input file is specified in the additional dependencies
4. There are files in the additional dependency list
This is the situation with form files in Qt that have include hints
specified in Qt Designer. The include hints get specified in the
additional dependencies for the custom build tool.
What happens is that VS will process files in the additional
dependency list differently based on where they appear in the list
relative to the input file.
If a dependency appears before the input file, VS will require the
file as a build input. If you just specify a file name, VS looks in
the project directory (and only the project directory) for that file.
You have to specify the path (relative or absolute) to get VS to look
elsewhere. If VS does not find the dependency, VS thinks the project
is out of date (since the missing dependency is a required build
input) and will rebuild the input file.
If the dependency appears after the input file and the file doesn't
exist, VS does not include the dependency as a build input. Since the
file is not a build input, no rebuild is required.
Change-Id: I5af460d21ad049ed7819746fd60c98677b810692
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
as a side effect, this fixes the generators that were more bitrotted
(nmake and even more mingw).
Task-number: QTBUG-30644 #close
Change-Id: Iefa3f07125884412d091aa12b44935e5b1fb858a
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
sync up; this doesn't actually do anything in qmake.
if we end up calling cache() from within the initialization of the base
context, we cannot wait for for the completion of that initialization
before we proceed, obviously.
Change-Id: If30c6f3665fe423e767373a8821c406b2f5e0eca
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/b64b4431c20afd9e39c1463e736f998ef450688f)
sync up; this doesn't actually do anything in qmake.
as we modify the environment, it must be properly locked.
this implies that initFrom() also needs to be called with a lock.
Task-number: QTCREATORBUG-9835
Change-Id: I48bae9af9adaa0518e5a9db0ba08ff057ae14f9f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
(cherry picked from qtcreator/d022a2d19cecb00397c2a215fc4e3bf64b1e627b)
sync up; this doesn't actually do anything in qmake.
creator's file watcher can trigger many parallel, entirely
non-hierarchical project reloads. if there is enough of them to exceed
the thread pool size, some will be serialized already by qtconcurrent,
not by our wait condition. these should notice a faulty spec, too.
Change-Id: I8ce40cb90fbc28045127881d57ec94e125df79af
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
(cherry picked from qtcreator/759d0a69dd3973b4785b6f9412f46666a05cdf85)
You can specify a relative path to a .pro file in any directory.
Fixed a capitalization issue and a grammar issue and changed the
visible text in a link target.
Task-number: QTBUG-14139
Change-Id: Ib476bd400c46645709950c582492edcaaba9d7ed
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
That's not been in use for quite a while.
Change-Id: If5a18a54d32f330fe37655516d4b83e5d3d30afc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
use the new parser flags to report all i/o errors directly.
as a notable side effect, the "WARNING" prefix is gone (even though
it is still treated like that, which is mildly insane to start with).
Change-Id: I084375d5e7a3314ae763795f7c318804a9fb84b6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this doesn't actually do anything in qmake.
Change-Id: I908fc3792bdc321370e51be98adf7a9c81e37a85
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
(cherry picked from qttools/e1f3732197ef77a29cb7f3c1ce094b3f31a7b689)
(cherry picked from qttools/226f013441990aa4a58f7c82e284057cff659959)
We just need one digest algorithm, any algorithm, to generate a
somewhat unique identifier. SHA-1 will suffice.
Change-Id: I3cb26bf866d616df3ef32feace10934f19daa1a6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Set the SONAME to the library name without the major
version number appended, as android does not have the versioned
symlinks.
Change-Id: I41c504869019a393a3f112b2f7fc81c7ad5afa1c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
-corrected qmake.qdocconf file to not read the manual twice
-moved the snippets and images directories to make sure they are not
in the src directory
Task-number: QTBUG-32580
Change-Id: I7b702ce3b1c8709bbb1f473f70625083242f1a40
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Add the depends variable with all modules as values,
because the QT variable value documentation should list
the import statements for all modules.
This patch enables linking to other modules.
Change-Id: I521ac22bac27d79537c14583f6592251288974a4
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Qt Windows Extras is a new add-on for Qt 5.2.
To make the link work, also added qtwinextras to the
doc configuration file.
Change-Id: Ib7d117908c241812c200ec701b6f2be27fe893c6
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
sync up with qt creator - for qmake itself, this is just a minor
refactoring.
Change-Id: I833253f81c3159056fab2ff888f293b36cc2ef56
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/66802ef8bf7989dc025e34bf91d93576189c483c)
(cherry picked from qtcreator/69542826fa643a0fed2fc9e717f072c2852dc017)
(cherry picked from qtcreator/196424115338fb9a535810704b7d814d318b0462)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In the Help mode in Qt Creator, many have accustomed to search e.g.
for 'qmake variable reference' which no longer exists as a title in
the qmake documentation.
This change provides easier access to the qmake reference by
creating keywords for them, making them appear in search results
for searches starting with 'qmake'.
Task-number: QTBUG-32268
Change-Id: If60a0cdc11464a8aeb50c62ddbde9683326e1384
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
... as that causes debug+release installs to overwrite each other's
postprocessed files.
introduces CONFIG+=sliced_bundle, which instructs qmake to create
file-by-file install commands. we don't know whether people are not
putting files outside qmake's knowledge into the bundle build dir, so
this mode is not necessarily backwards-compatible, and thus off by
default.
Task-number: QTBUG-28336
Change-Id: I23e90985ccd3311f0237ed61aadca6d7ed8325b7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
by convention, $target.framework/$target links to
Versions/Current/$target, not Versions/$version/$target.
Versions/Current already links to $version.
so this adds one indirection, but is otherwise the same.
Change-Id: If3d1a3713712f4221ec31883977e50bce6f91764
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this went unnoticed so far, because the mac qmakespecs don't define a
strip command to start with.
Change-Id: Iac3e7ffa6f400373552134a44b9713aaf5f44589
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
replace() doesn't detach if there is nothing to do.
Change-Id: I845b585c766f44a670ca3af1fc11ba03e7317622
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qmake has the rather bizarre logic that QMAKE_LIBS* is escaped rather
early (instead of right before being written out the the Makefile).
consequently, we need to explicitly escape the paths from the prl files
as well.
Task-number: QTBUG-32326
Change-Id: Ieaf81113d3ca3cf5d8a1ef87c83c5721d6b473ee
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
escape backslashes before the quotes, as otherwise we'd escape the
backslashes we just used to escape the quotes.
Change-Id: I88e12c0c2cfc53e0ab8dce9807b06dfce6aa6e78
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... as that is the CWD of the command (since b139e7e96e5c).
leave the resolution relative to $$PWD as a fallback with a warning.
Investigated-by: Harald Hvaal <hhvaal@cisco.com>
Task-number: QTBUG-19352
Change-Id: I75de9444a647cd9e6f509e3d8eb3382dc985e5ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Scripts are available in internal mkdist repo.
Added license tags, updated licenses and copyrights/contacts
Change-Id: Ibc734275f3000987eaa4f5c57f19d4e1fda2c479
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
it's not necessary to immediately re-calculate the roots after assigning
QMAKE_PLATFORM - it's sufficient to do it on-demand, so merely
invalidate them. this avoids that we re-calculate them multiple times
without ever using them in between while processing specs with
distributed platform assignments.
Change-Id: If508594764811b96a577fc81c5ded34ab0453148
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
(cherry picked from qtcreator/28df27d924bb407791a76de8159c9ffa6efde283)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
looking up the same files in the same locations over and over again
is a rather significant waste. in particular, looking up the CONFIG
flags that don't correspond with features has a measurable impact on qt
creator's project loading time.
Task-number: QTCREATORBUG-9154
Change-Id: Ibae3d8b7797e706a6416a7d45c77734ab1281b51
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/fa27cd79e05aed4ebd16d5648480cc7d48fefd43)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
just directly use the filename we constructed it from.
Change-Id: Ia428a2cb4b192fea6bde62dfbf35361bcfc4b21e
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/571234786a3ff7e8e3a9220f12d22a9f74f7a53c)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
When defining QMAKE_LFLAGS += /MANIFEST:NO to pro file,
it is not written to vcproj in VS2008.
Added MANIFEST:NO generation to vcproj
Task-number: QTBUG-31975
Change-Id: I5f84b30db711bf9c317ca20dc65b207140edb398
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
makes for less visual noise and a tiny bit more efficient code.
Change-Id: I587707fa4e2dc9bead9435bf5caf3a98ab680725
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Add mkspec win32-msvc2013 and make VS 2013 known to configure and
qmake.
Change-Id: I6e63a4d679727a8a3f068f377956185996d72bce
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
contrary to what one may expect, it's actually *not* supposed to remove
the meta-characters it interprets.
luckily, this function is not used much any more ...
Task-number: QTBUG-31877
Change-Id: I2b60f9b173140da78db2b07b596cc2e5f6e6d555
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
We were only fixing QMAKE_C/CXXFLAGS, not the defines we then appended.
Change-Id: Iaa4a394738658c45aae83941ebe54470d6d8e250
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If both the rc_file and res_file was added to the project then in MSVC
2012 it would cause an error complaining of a duplicated resource.
Task-number: QTBUG-29826
Change-Id: Ib3401b423208cd8c90895038c9cbadd80c39b542
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The removal of embed_manifest_dll or embed_manifest_exe from CONFIG
now disables the embedding of manifests in VS project files.
Task-number: QTBUG-5301
Change-Id: I031318883edca6f9b63a7981ef6c44e3f123f6fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The POSIX function uname() can return any non-negative value for success.
- Example: Solaris 10 returns 1 on success.
See: http://pubs.opengroup.org/onlinepubs/009695399/functions/uname.html
Change-Id: Ic3d51f94a31d8b562b28a2d09df3d31b04c77dc8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
For vcproj files we should not automatically add a dependency for extra
compilers as this should be done via the depends variable for the extra
compiler instead.
This fixes a problem where something like '@echo command' was used in the
command as it would depend on echo and not the actual command anyway.
Change-Id: I7c0aa0d62143aa39c518e8bce65f302afdba33c9
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
as of qttools/18a5e89623815f5355b4173a2e93609eb10289d1
Change-Id: I75cb55e0c404449a4e0d963e09185287a3f6343e
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
this avoids that an empty rebuild after a complete build re-runs qmake
everywhere again.
according to 1f83f0cf2a this is the behavior i originally intended,
but somehow it got lost when switching to the new interpreter.
Change-Id: Id5158d7e272fdee4f4a041fb7c828295a0a86684
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
instead, teach qmake to use the mkspecs dir from the source dir as well.
Change-Id: I9edac11f8997fcb0594d0a67419d4733dd4ed86b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this is for shadow builds during build time, where the respective files
are expected in the source dir.
Change-Id: I18dcfbdef99e1562a51dacac333642cae8105ebd
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
these files function as "anchors" for mkspecs/ and features/ directories
used by projects which load these files. ironically, these files didn't
see these feature files themselves.
Change-Id: I590855eb4a9d2c72b9abfcaa431d2f85a719c6e2
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
we were finding features/ directly in the source & build root, and we
were finding features/ under mkspecs/ from $QMAKEPATH and other mkspecs
locations, but we omitted the "transitive hull". this was
counterintuitive.
Change-Id: I9823e6606467c98f264c81385250da92311f51ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
sync up implementation with qtcreator.
Change-Id: I6a1578818512fa3b0773faf276a1d56881eb06d7
(cherry picked from qttools/582cbddc6ba1b74a7e4e07e0b5c23d47de6838cb)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
sync up implementation with lupdate & creator. no actual effect on
qmake.
don't filter out ^QMAKE_.*:
- QMAKE_MKSPECS is not printed any more, so needs no filtering
- QMAKE_VERSION can be simply used now, as we are now rather close to the
real qmake
- QMAKE_SPEC and QMAKE_XSPEC need to be fetched
- this fixes the default spec resolution
Change-Id: Ifcfa8b5b9e2bbf5d995940e1bb7f55e7d67aed3e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
(cherry picked from qttools/0037bef09ca77c5ae4d20bd09294ba1d57537e09)
sync up implementation with lupdate & creator. no actual effect on
qmake.
Change-Id: I1bdeb759e895e4200f09332dadf8a6cef348182f
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
(cherry picked from qttools/94ab2efb2d155d3c1ca7b91c1daf443a149bcf1f)
This reverts an earlier change that tried to fix the relationship between
Qt's concept of output directories with what Xcode expects, but it broke
DESTDIR. The relationship between Qt and Xcode is still a mess, but at
least DESTDIR now works.
Change-Id: I44f056d48c87359a609e0337da266120ba4eb155
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
the logic in the configures was even trying to express that, only that
nowadays we always ship syncqt, so the tests were kinda pointless.
this frees us from the perl dependency for non-developer builds of
packaged modules (except for webkit, which needs almost every scripting
language on earth anyway).
obviously, this requires that the packaging scripts run syncqt in the
source dir before tarring up the sources. note that for repositories
other than qtbase, the -version argument needs to be passed to syncqt.
Task-number: QTBUG-29465
Change-Id: Ic929ab17a5de4b30fbf48b3aa9bfa3b4d2ef37d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The PlatformToolSet tag belongs into the PropertyGroup with the label
"Configuration". The former location in an anonymous PropertyGroup
tricked Visual Studio into displaying the right PlatformToolSet but
using its default value. If VS 2010 and VS 2012 are freshly installed
on the same machine, the default toolset for VS 2012 is VS 2010.
Task-number: QTBUG-30822
Change-Id: If00a532e92b0812c552b1cac52ff77a1e7039146
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this was forgotten when the value lists were extended by a size hint.
Change-Id: I6f9b55ed671224a9b8735c8d937f94aac4a73a42
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
(cherry picked from qtcreator/f24c9865306624c2fc150d4bd262a5c4d5a3689a)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Warnings came up using MinGW 4.4:
* qmakebuiltins.cpp: 'QString windowsErrorCode()' defined but not used
[...]
Change-Id: I80827f7f740ff380f13cef96d6b43baaa7e179cb
(cherry picked from qtcreator/0e13cf3faffc7463ae2bf535dfdb008202112cc4)
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Some projects set TARGET or DESTDIR only in the build_pass
Task-number: QTCREATORBUG-4273
Change-Id: I3673dd93b37b10102a0c1f1ce053e1aef8aaf53f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/95169eb8e39c6f43b7e74fbb18d4db19a38b0124)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... and introduce -hostlibdir configure option for symmetry.
the libraries built for the host have no business in the target prefix.
in principle this code would even support dynamically linked host
libraries, but that's currently unused.
Task-number: QTBUG-30591
Change-Id: I8e600fa4911a020fb0e87fbf7ef2f35647c7c4d5
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Ivan Romanov <drizt@land.ru>
Fix C4267 MSVC warning.
Make sepSize an int, because this function is never called with a size_t.
Change-Id: I2b834fe7c1408e34d55d9f137231e2f5816f3f1d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
/RTCsu and /RTCus must be handled as full runtime check options.
Task-number: QTBUG-30711
Change-Id: I783bf49f2ab1d4fd9636dca8e434bccb54844c8c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The vcxproj format supports the /we compiler switch as
TreatSpecificWarningsAsErrors tag.
Support for this switch got lost during refactoring of the
vc(x)proj generators for Qt 4.8.0.
Task-number: QTBUG-29098
Change-Id: I607e907dcb9c1bc7d261053b6d757941ec7db822
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Fix passing of preprocessor definitions with double quotes to the
resource compiler and to MIDL. Both have a different escaping mechanism
then the C/C++ compiler tool. This fixes a regression introduced in
9e9911715c.
Task-number: QTBUG-30859
Change-Id: Ifa041df407030320847373a5964a547c39dd5439
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
and consequently that it finds qt.conf.
Task-number: QTBUG-30583
Change-Id: I48441477e941d9609270d6e5e1b405127c0c0aca
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
These timestamps were useless and broken on non-ascii locales.
Change-Id: Iad08eb0f5dfd5e86f6451d6572365d0c080e6115
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
On iOS the compiler expects archs like armv6, armv7, armv7s when passed the
-arch flag, or when the ARCHS Xcode variable is set. Instead of mangling
QT_ARCH, which is used other places and assumed to match the values
provided by the arch.test, we use our own variable.
Change-Id: I05e10be8d69dd4d7cbcef04640fef99f1efb253d
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Both the /NXCOMPAT and /DYNAMICBASE options were handled by qmake but
never written to the vcxproj file even if they were set in the pro file.
Change-Id: I4ca26fb312648944c25d3a24cdc8c640c9de619d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
If mingw32-make.exe encounters a backslash as the last character
on a line it interprets this as signifying line continuation.
When building Android Qt on Windows via cmd.exe, this happens
as backslashes are used on Windows as directory separators.
The workarounds are to make sure that a comment appears directly
after the definition of DESTDIR and that a space ends such
$(MOVE) command lines.
Change-Id: I7f93b655e004edaadac41d0d96bca23e1ba3a85c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In ebc4fb45 all NDEBUG defines were removed from DEFINES to adjust the
nmake generator's behavior to the vcproj generator.
Turns out that the vcproj generator did it wrong.
The user must be able to specify NDEBUG in DEFINES.
Change-Id: Iaaf3915ac79acbbd1e7a3172ad3951d0d686041b
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Split $(MOVE) commands up into one per file so that cmd.exe's
builtin move command can be used.
Change-Id: Ife8d7449a2d7718a67082e2d78954964033ce07d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The undocumented feature of linking the library with the highest
version number is more confusing than helpful.
We're changing the default from on to off now.
Users who still need this feature can turn it on with:
CONFIG += link_highest_lib_version
Task-number: QTBUG-15596
Change-Id: Ic998c1685003caa6f57e27dccf83c8b4a2a09553
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This makes it possible to properly parametrize alternative compilers.
Change-Id: Iaf0961c47875ee16d815356f36acf5652577cdca
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
in the case of sprintf it's surprising, in the case of join it's
anti-thetical.
Change-Id: I4eb7e56d31ac6ed68adf852f1a19b33554d38eb4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
depend_prl would so far only ensure that the dependency existed, not
that it would be up to date. this is of only limited value, so make sure
that the dependencies are always updated.
as this is somewhat expensive (every dependency's makefile will be
entered as many times as it is used, plus one), provide an opt-out by
adding fast_depend_prl.
Task-number: QTBUG-29486
Change-Id: Ifa2e100bc4c269a403ab620927bfe5c7efe9a435
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
unlike before, the output dir is now important already during the project
evaluation phase, as finding .qmake.conf depends on it if .qmake.cache is
also present.
ChangeLog: fixed qmake -tp vc (and configure without -no-vcproj)
Change-Id: Ifdb95f3b38a70c0d08e71238059292e761dcfa53
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
unlike unix' mkdir -p, windows' md complains if the directory already
exists. the workaround is a quite complex command, so the so far used
concept for assembling the command line from pieces was replaced with a
single template. for symmetry, adapt the makefile existence check to the
new concept as well.
QMAKE_CHK_EXISTS and QMAKE_MKDIR_CMD were added, with hard-coded
fallbacks (ugly).
QMAKE_CHK_FILE_EXISTS and QMAKE_CHK_EXISTS_GLUE (introduced in 5.0.0)
are simply deleted again.
QMAKE_CHK_DIR_EXISTS and QMAKE_MKDIR remain for legacy reasons, as qmake
emits them into the Makefiles, and custom commands may rely on their
presence.
Task-number: QTBUG-28132
Change-Id: I3d049cb5d26947e5c3d102d0c2da33afb2a95140
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
let the backslash escape only quotes (and itself), after all - $$list()
(one of the main users of this function) is commonly used with (windows)
path lists, so letting it escape anything would make a royal mess.
Change-Id: I2dae2e4508903e62c190c1497da68d53978118e7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
any of the directories may be the root, which would lead to double slashes
in the constructed filenames.
Change-Id: I053e167a19b795b40e780fc29db356c7f24d286a
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this allows skipping an entire feature file if a condition is not
fulfilled, without putting the whole body inside a conditional.
Change-Id: I84fe9c94dda58c794fb52c3f163b40563b0db30a
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
we have proper fallback paths further down the line.
Change-Id: I3648cc985d21bbec4c2c24e179830db4467af210
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the purpose of it is truly elusive - the output directory is maintained
by the surrounding code anyway.
Change-Id: Id1a481d85a7b83ab0676ef650c900414d0ba83b3
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
d28073d9 creates a distinction between "mac" and
"macx". The latter is not set on iOS, which caused
MakefileGenerator::target_mode to be set to TARG_UNIX_MODE.
Check for the "mac" active config instead of "macx".
Rename TARG_MACX_MODE -> TARG_MAC_MODE.
Change-Id: I7192788c33f5723034ba76da2492379dd454f0ab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
this makes it possible to properly parametrize alternative linkers.
Change-Id: Ia9cf574544a0259975470366d278b6c5dc747906
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Some headers, like assert.h, check for the presence of NDEBUG.
We already define NDEBUG for MSVC/vcproj release builds.
Task-number: QTBUG-3389
Change-Id: I3b1510d47ff80611aa8072e66492ff2d648393eb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Change-Id: Ic04da6063863585665c9133caba0279ba478fbb4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Ian Dean <ian@mediator-software.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
When a framework is referenced in the XCode project then it is known as
a framework by the lastKnownFileType and not the reference type. This
ensures it works in both XCode 3 and XCode 4.
Task-number: QTBUG-29371
Change-Id: I434246a46d6c5bfd50ba7de1a7c710c0caf0bc0a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
We're not in the output directory yet, so resolving using vanilla
fileFixify will end up failing when we check if the file exists, since
QFileInfo resolves relative paths against the current directory.
Change-Id: I414c6a2e83b49e3fb30e6153a49f7a90a8e528a0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The Xcode generator seems to have been written with the assumption that
writeMakeParts() would be called with the output directory as the current
directory, but that's not the case when shadow-building. Perhaps this
was changed in qmake at some point, and the Xcode generator was not
updated to reflect that.
Instead of replacing every occurance of fileFixify and other logic to
deal with paths, we just chdir into the output_dir for the duration
of the function (except when writing the 'make qmake' makefile, as
the regular makefile generator works as expected with the current
directory set to the input directory).
Change-Id: I6ba492036d73f29f4adbd7cd554db9504050629e
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
We already assume that if a source is buildable and should end up in OBJECTS we
can let Xcode build it, so we skip this input for the extra compiler.
Change-Id: I17b2408925b8e6513f0fa0d2459ec539bf7381d3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The PBXResourcesBuildPhase will optimize resources, such as turning XIB
files into NIB files, running pngcrush on images, turning string files
into binary plists, etc, so we prefer that if possible.
Unfortunatly this phase does not support custom paths, so whenever we
encounter bundle data with a custom path we fall back to the regular
PBXCopyFilesBuildPhase.
Change-Id: I539db03dd7982fd37293123b6428cdb695f64d2b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
The Xcode generator creates a makefile for running 'make qmake', and the
makefile passes -o to ensure it writes to the same Xcode project. This
fails when qmake then treats -o foo.xcodeproj/project.xcproj as not only
setting the output filename, but also the output directory to foo.xcodeproj,
which results in the Xcode project trying to reference files relative
to this directory, such as '../main.cpp'.
Unfortunatly the output filename parsing happens too early for us to know
whether or not the generator is Xcode, so we just have to assume that
a certain combination of output filename and directories means we are
generating an Xcode project.
Change-Id: I0901d4db995f287c35cbbbd015683d5abda6d0f5
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Replace them with dashes, like Xcode itself does.
Change-Id: I302425363a2eef13394025cd4a9e414048ce55ce
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
There was quite a bit of cruft left over from older Xcode version. We
now produce Xcode 3.2 compatible files, similar to what Xcode would do
when asked to upgrade one of our generated files. In particular:
- Removed refType
- Set more lastKnownFileTypes
- Renamed defaultConfigurationIsName to defaultConfigurationName
- Add runOnlyForDeploymentPostprocessing = 0 to build phases
- Don't put buildSettings directly into PBXNativeTarget
- Don't write productSettingsXML
- Don't write startupPath
- Don't write name when path is the exact same
- Write empty buildSetting lists as empty string
- Don't write empty PBXBuildFile settings
- Don't write generated/neede filenames for PBXShellScriptBuildPhase
- Use PBXFileReference instad of PBXFrameworkReference
- Prune deprecated buildSetting variables
- Remove deprecated PBXBuildStyle sections
- Resolve correct CC/CPLUSPLUS/LDPLUSPLUS
- Write IPHONEOS_DEPLOYMENT_TARGET
Change-Id: Ia2365c2623fe898878bd10636c3b85145c1cff04
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Instead of letting each qmake variable have its own auto-generated name
we try to group common variables into similar groups as used by the Xcode
templates provided by Apple.
We also prevent the same files from ending up multiple times in a group.
Change-Id: I73b13d6071bb7b3cd1501c422a99c60743221485
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
The Libs: line of the pkg-config files is constructed
by taking the name of the .pc file itself, and stripping
off the path and extension. However, the code which does
this does not handle path separators correctly when the
target OS and local OS are different. To get around this,
the custom string manipulation was replaced with a call
to QFileInfo::completeBaseName(), which can handle the
different path separators correctly.
Task-number: QTBUG-29700
Change-Id: Ia817b415d303b249f56fcc3d1f073cae99c43046
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Replace the old sed / template @FOO@ method with echo.
Enable MSYS bash to build qmake.exe
Use qmake/Makefile.unix for all win32-g++ builds.
Change-Id: I6e27d69b28d27131838bbbb3a4ee5a08b470f31b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead of after parsing the makespecs, were we assumed QMAKE_PLATFORM
had been set by the makespec and did an explicit update.
Allows loading platform specific features from within a makespec after
updating QMAKE_PLATFORM.
Change-Id: I0eb3b7fb88ce48b00a384850c5d87223c06234d7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
In our incremental linking command block we relied on del never
returning a non-zero exit code. Other command line interpreters
than cmd.exe, e.g. TCC, behave differently.
We now check for existence before trying to delete the manifest
file.
Task-number: QTBUG-29698
Change-Id: I94d125998da6f2c0377104f7e83cdd9e8b838329
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
$$(FOO) would automatically split the contents of the environment
variable at whitespace (and interpret quoting inside it). the way to
prevent the splitting (but not the quote interpretation) would be using
"$$(FOO)".
this behavior is entirely unexpected and thus an incredibly effective
source of quoting problems - according to a grep over the whole qt
sources, there isn't a single case where things were done right. in qt
creator, well over half the cases are wrong.
also, the "feature" seems entirely pointless: nobody uses spaces as
separators in environment variables.
consequently, simply remove it, even in a patch release. i'm postulating
that nobody will complain.
Change-Id: I9ed3df1b0d1ef602acd78ceb118611d294561da6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
We don't have to do fuzzy mkspec name searches anymore.
The WinCE mkspecs add "wince" to QMAKE_PLATFORM which ends
up in CONFIG.
Change-Id: I6c0576b5504beb416e95eeae0dec579b16b84746
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
introduce the QMAKE_PKGCONFIG_FILE variable for that purpose.
this is another feature that is needed for a bugfix ...
Change-Id: I08f470e1b2b7dd318af9195330c15d813fcd55ef
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
#!/usr/bin/env ruby
Dir.glob('**/*.cpp') { |file|
# skip ast (excluding paste, astpath, and canv'ast'imer)
next if file =~ /ast[^eip]|keywords\.|qualifiers|preprocessor|names.cpp/i
s = File.read(file)
next if s.include?('qlalr')
orig = s.dup
s.gsub!(/\n *if [^\n]*{\n[^\n]*\n\s+}(\s+else if [^\n]* {\n[^\n]*\n\s+})*(\s+else {\n[^\n]*\n\s+})?\n/m) { |m|
res = $&
if res =~ /^\s*(\/\/|[A-Z_]{3,})/ # C++ comment or macro (Q_UNUSED, SDEBUG), do not touch braces
res
else
res.gsub!('} else', 'else')
res.gsub!(/\n +} *\n/m, "\n")
res.gsub(/ *{$/, '')
end
}
s.gsub!(/ *$/, '')
File.open(file, 'wb').write(s) if s != orig
}
Change-Id: I3b30ee60df0986f66c02132c65fc38a3fbb6bbdc
Reviewed-by: hjk <qthjk@ovi.com>
(cherry picked from qtcreator/29a93998df8405e8799ad23934a56cd99fb36403)
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
/Gs[size] will be added as additional option as there is no XML element
for this option.
Task-number: QTBUG-29329
Change-Id: I1f09bfdac90f9c5f2333dc03e6e4e6a206b4f6d0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The default must be "unset" to let the user's MSVC settings decide
what the default value is.
Task-number: QTBUG-29329
Change-Id: I6015202c123dbb7304941b0d24557a26a1e3236c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this is undeniably a new feature, but it's needed for a bugfix.
Change-Id: I951a3128eb580404ee0c7e3cdcb4d6170e899f70
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the vendor string was changed, so compat is broken anyway.
Change-Id: I07241843237ce28bd7a869bb4170c7e4c8d084df
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Curiously, qmake could fix .prl and .pc files for unix, but only .pc
files for MinGW. qt_module.prf seems to have known this.
Task-number: QTBUG-28902
Change-Id: Ice9983a69813690c0d4b96ca11589440182569a0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Metafiles such as .prl and .pc files contain paths that have to be
adjusted during installation. The same code is used for unix and
windows so move it into the base class.
Change-Id: I82db89ec83820a4fa0214ba15e7cd63438f6dc91
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This reverts commit e81d7fd1e5.
The insane logic that prepends the version number of a lib to
TARGET_EXT instead of appending it to TARGET breaks every vcxproj
with a library version.
Fixing this properly will require much more work and testing on all
supported Windows platforms.
Forward-port of 8869b3b3 in qt/qt.git.
Task-number: QTBUG-29286
Change-Id: Ib96de9c6f41995af013b146a00c850c9da3a9d8d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Avoid runtime dependencies to e.g. libpwinthread-1.dll, libstc++-6.dll.
This prevents Qt Creator from spitting out error dialogs on each startup
for registered MinGW versions that aren't in the default PATH.
Change-Id: Id55518db8c8e0521b6a41add1eaf38f75a892c8b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
A new qmake's variable RC_ICONS is introduced to specify the icons.
The first one will be used as the application's icon.
Change-Id: I4218db795837d470087dff8526eb0e4cb81ce5ed
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
these variables are somewhat magic: they are relative to DESTDIR, and
they also specify the installation location relative to target.path.
the actual output directories are created by other code.
Change-Id: Iead3006057516f5a49b6fd4bd8996a062c984fce
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The resource id must be 2 for DLLs. This was broken for the
"debug with incremental linking" case.
Task-number: QTBUG-28682
Task-number: QTBUG-28683
Change-Id: Id8c48a1dec30e341de949213c63c1c9b73956dac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
qt is already added by spec_pre.prf, warn_on and depend_includepath by
default_pre.prf.
Change-Id: Ic00e0ba496d698ed9659c476f2ca99fc0f86a093
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Manifests must be embedded into DLLs with the resource id 2, not 1.
This fixes a regression introduced in commit c9406bcf.
Task-number: QTBUG-28524
Change-Id: I93b1dfe4614d0535f47fd881b8688a23e83e845f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Ismo Haataja <ismo.haataja@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In RC_INCLUDEPATH one can add include paths for the Windows resource
compiler.
Task-number: QTBUG-13776
Change-Id: If1d9ed44097adb7789df03e4ccd4e3b7df9e8d08
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In single config mode extra compilers were not written to Visual
Studio project files, because they were not added to the fake project
object we're using to write a single config project.
Task-number: QTBUG-27505
Change-Id: Ie57b648861573496252f1383dc77e0729e244947
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
ProductVersion is set to the same value as FileVersion.
Task-number: QTBUG-27428
Change-Id: Ia01e14112d3a0e74b9fbe5fc8d9c4f9ae690db34
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Rename LINK to LINKER. The MSVC linker uses the environment
variable LINK to pass additional command line arguments.
We must not hide this variable.
Task-number: QTBUG-28332
Change-Id: Id78476d1cf4a73175b9f47292c67f38a43ae5ba4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
nmake depends on a variable being assigned before it is referenced, so
just write it out to every Makefile as the very first thing.
this is nicer than the previous hack anyway.
Change-Id: I50f409919352f560f7ef6c848a2f7c51d1878148
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
complementary to QMAKE_RPATHDIR. this avoids that we need to sprinkle
linux/gcc specific code all over the place.
Task-number: QTBUG-27427
Change-Id: Iebafd1749d1a0d803704902473df8c743f074ddc
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Also change Trolltech for QtProject in other places
Task-number: QTBUG-23269
Change-Id: Ie4e344f23cab77c575562d18b481b3369ce30491
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The LIBS statement generated into Makefiles contained duplicate
libraries when application was linking static libraries.
Fixed by adapting the logic from unixmake.cpp's version of
processPrlFiles() to remove duplicates.
Change-Id: I12e152900233d0376b7d7ac6cd18a92850a6d640
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
User applications are those that users run directly, whether it be for
development or not. The executable binaries that the user does not
usually run but is still required for proper functioning are called
"program executables" in Autoconf and they are placed in libexec.
This commit adds support for "program executables" in Qt by adding the
-libexecdir option to the configures, the qmake variable
QT_INSTALL_LIBEXECS (note the plural, to match all other properties),
and QLibraryInfo::LibraryExecutables.
At the time of this commit, the only expected "program executable" is
the QtWebProcess, the WebKit2 helper process from QtWebKit.
Change-Id: I66c3a3e0cf7f9d93b5f88f55f18e957faff608fc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
this is necessary for having a clean way to recurse even from leaf
makefiles.
the location where the variable is written in the makefile is somewhat
bizarre, but the code is so convoluted that finding a better place would
mean either a lot of duplication or a lot of prior refactoring.
Change-Id: I68e4cf7e3814f6c60b2e3421d69775c993dafb23
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Windows static builds currently fail due to overlong command
link lines containing multiple occurrences of base libraries.
Task-number: QTBUG-28131
Change-Id: Ibf7f551fc98c879111b32b27a16f4e96260743c7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
When sifting through a file to find Q_OBJECT and friends, qmake
was locking it for reading and writing (_SH_DENYRW).
This breaks parallel builds where multiple qmake instances might want
to scan the same file.
Changed the sharing constant to _SH_DENYNO, which doesn't lock the
file at all. This is consistent with the _sopen_s call in findDeps.
Change-Id: I9c0a06db7f580f411e79d9d96dd36a6d705679aa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This commits adds a -qmldir configuration option for the configures to
allow the user to change the default location (it defaults to
$archdatadir/qml).
It adds a QLibraryInfo::Qml2ImportsPath value for
QLibraryInfo::location, a qmake property of QT_INSTALL_QML and a qt.conf
configure location entry "Qml2Imports".
At the same time, it makes the qmake .prf files dealing with QML plugins
be the QML 2 version. Those files are new in Qt 5, so we have the option
to choose which version we want to use.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-October/007136.html
Change-Id: I8c1c53e8685a5934ed0a9a42ba5663297b81a677
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This fixes linking on MinGW after the library renaming, and is also
in line with the logic in the nmake generator.
Change-Id: Ie25ce6c1d2b8f292c4e454db1cad9bcbbee7a05d
Suggested-by: Erik van Pienbroek
Task-number: QTBUG-27137
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this should be fatal, but so should be a lot of other conditions.
Change-Id: I0c2c0bb9590ea1e4d0eae76e29eda34915914217
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Architecture-depedent Qt data defaults now to something under
-archdatadir. Architecture-dependent data is everything that contains
machine code (e.g., plugins) as well as anything that hardcodes
build-specific data, like qconfig.pri and qmodule.pri. That is:
QML imports: $archdatadir/imports (includes plugins)
Qt plugins: $archdatadir/plugins (machine code)
Mkspecs: $archdatadir/mkspecs (build-specific)
Architecture-independent Qt data defaults now to something under
-datadir. This option existed in Qt 4, but did not differentiate between
arch-dependent and independent. Following Autoconf's lead, --datadir is
the *independent* data root.
translations: $datadir/translations (.qm files are arch-independent)
docs: $datadir/doc
By default, both new options are equal to the Qt install prefix.
(Strictly speaking, for complete Autoconf compatibility, we'd need a
--datarootdir=$prefix/share, --datadir=$datarootdir/qt5 and
--docdir=$datarootdir/doc/qt5, but that's just nitpicking and
unnecessary)
Change-Id: I39c886a6a2d2d2c0b11923c50974179e21f2af76
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
qmake automatically appends the library's major version number to the
DLL file name on Windows, as DLL naming doesn't include the version
number on a suffix like on Unix systems.
This flag makes it so qmake skips adding. This will allow us to insert
Qt's major version number at a different position.
Change-Id: I25d471038841fb0c5a34ef6b3bd6266aa33cebd1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
DEPENDPATH merely says where to look for impliciit dependencies, not
where to find explicit ones.
fwiw, the other way round may be considered correct, but DEPENDPATH
exists for the sole purpose of limiting which paths should cause
recompilations, so it would be counterproductive to extend with with
VPATH.
Task-number: QTBUG-11912
Change-Id: I86450b5fd5aeb1f1b015b53f0adcd167ff4ce04d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
instead of symlinking (on unix) or creating a forwarding spec (on
windows), just put the default specs into (the bootstrapped)
QLibraryInfo.
Change-Id: I595500ef7399f77cb8ec117c4303bc0a2ffe505f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When writing a file with write_file() we have to inform the pro file parser
cache to discard the file if it's existant in the cache, to ensure that
calling include() after write_file() always works.
Change-Id: I7d09269a57de55ca30b0e11dd40770de9f919f64
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The content in the prl file is not compatible with what CMake
expects in the value of the IMPORTED_LINK_INTERFACE_LIBRARIES
property. That property expects a list of IMPORTED targets or
full paths to libraries.
The prl file gives us a whitespace separated string of content
suitable for passing to ld, that is, it contains -L and -l content.
As this would take a lot of error prone parsing in cmake code in
order to resolve the content to a list of full paths to libraries
(which can be processed by any cmake generator), it's better to
remove the code until qmake is able to generate a list of full
paths.
Change-Id: I72fe8e862b7f3bd25a7f9a03db94d2e9b815d08a
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The generated CMake files need to pass ';' separated libraries to
the IMPORTED_LINK_INTERFACE_LIBRARIES property, otherwise we get errors
such as this:
http://testresults.qt-project.org/ci/QtTools_master_Integration/build_00386/win32-msvc2010_Windows_7/log.txt.gz
(grep for QtCore5.lib.lib)
Rather than a naive and error prone replacement of whitespace, generate
the appropriate ';' separated content directly in the qmake prl file.
Change-Id: I8eb5e233a0318b57ec74b86d910583ff99c29415
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This fixes a problem when the preprocessing scripts were called from a
path with spaces in it.
Task-number: QTBUG-15317
Change-Id: I92ea85e12e2f9abfc262a8dcaa4f414e471e468c
Reviewed-by: João Abecasis <joao@abecasis.name>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Add failing when crosscompile for Windows CE
and no matching SDK is found.
Change-Id: I359e792fe46bab46729788666679a16cb94f340e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Due to all the changes recently it broke in some places, this now
gets it working again.
Change-Id: I879ca5684435289a61d8db248f2c3f64f6866a60
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
When generating the solution file it should extract the
dependencies from the pro file as this will bring it in
line with the Makefile generators.
Task-number: QTBUG-22561
Change-Id: I8d5b6607712f2c77c87ef093480e64b9633817d8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Fix "warning: anonymous type with no linkage used to declare variable
'<anonymous struct> dotNetCombo []' with linkage".
Change-Id: Iaff0d460df53fd6d0732d39bf633688805f5c653
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The differences to VS 2010 project files are the
version number (surprise!) and the PlatformToolSet tag which
sets the version of the toolchain.
Change-Id: If26f08fad1a69d7e6cd28cc5e860ff964f19b264
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: I9c9964703dedfdab6e7bfac80be22bd5570e2e49
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Same reasoning as for 68e04c3ac1 applies.
Adding the overload was easier than to teach a Perl script to distinguish
between QStringList and ProStringList instances...
Change-Id: I6de6ecf21fdad135ac213b5c794927a9bc120a92
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
