The test run faster and it less vulnerable to an inaccurate time.
Change-Id: I19475095395dcf1e6d47fdbba5eeffabab1fc7b9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Now the test is less fragile to time and it executes 4s faster
Change-Id: Id3eb8ed2c03317e7d2f2c3cd17f889a8d8e7e5b4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The test still can fail because 1s is quite a short time.
Change-Id: I6f42c182f2932d5a053f6a69667210529c9a7697
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
- Do not save geometry when going from maximized->fullscreen
- Use SW_SHOWNA instead SW_SHOWNOACTIVATE as otherwise the
maximized geometry is restored.
- Add a test for Windows.
Task-number: QTBUG-49709
Change-Id: Ic81e7398ee90d499a50b02192a45cb09276a2105
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
As for the #include-parser, the moc-detector's minimal C preprocessor
could be confused by a raw string into ignoring large chunks of code.
Change-Id: Id688e9a1f04628ce75a51a7d15269078c734288e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
If a / wasn't part of a comment-start, it and the character after it
were none the less stepped over. If the character after started an
enclosure, this would duly be missed, leading to mis-parsing of the
subsequent text. As for similar bug recently fixed in findDeps().
Change-Id: Ie5329ec633c23a554b42a6351723c980e27fb9a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This extends the test suite introduced in 497f0af1f7 for
a known-to-be-good case also for 32 bit systems.
Change-Id: Ia231bcb9b0102c28483d932be18767662b7a6afd
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Previously, the geometry stored for floating dock widgets
in QPlaceHolderItem::topLevelRect and QDockAreaLayoutInfo::saveState()
included the window frame (frame position/content area size).
This does not work in the case where a floating dock widget is deleted
since the geometry is determined after reparenting the widget when the
frame geometry is no longer available. Change the behavior to store
the geometry excluding frame to avoid such problems and adapt
QDockWidgetPrivate::setWindowState() accordingly.
Task-number: QTBUG-49832
Task-number: QTBUG-45780
Change-Id: I84b5c80df6e1c9e738bbb1407b9047cc84719ce0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This test is marked as blacklisted on 10.10, and it
is found to still fail in 10.11.
Task-number: QTBUG-49834
Change-Id: Ibddb1af6b61f3fca2b2aea18102bbaa5390a40d3
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The C preprocessor allows backslash-newline anywhere and allows
comments anywhere it allows space. Testing wilfully perverse
applications of that revealed qmake's parsing of #include directives
wasn't very robust. So rework to actually follow the rules and add
those tests.
Change-Id: If5cc7bfb65f9994e9ab9ed216dd1ee7285c63934
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This reverts commit 9a6a58a95a,
which was a work-around for a qmake bug, now fixed.
Task-number: QTBUG-19393
Change-Id: Id467bb5907a88f03eac0e29a90f4ff7e97045423
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
TEST_HELPER_INSTALLS cannot be used on platforms with no
QProcess support.
Change-Id: I2a6a283d94ca4487fc628449c53fc37140dd291d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Since special files have file size == -1, they were always filtered
out by QFileSystemModel, even when passing QDir::System as filtering
option. Keep them instead.
The testcase is more convoluted than it should be because QFSM
is so broken that it returns valid indexes for invisible elements
in the model (such as filtered out elements).
Change-Id: I023a9813dbfeed7be99dded42c66b1191afdc17e
Task-number: QTBUG-20968
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The test was comparing an "unsorted" file listing read from disk
with a reference listing, checking whether the two were different.
Obviously that's a nonsense test, as there's no stable order
for the entries returned by readdir_r and friends.
Change-Id: I1d781a6513c42bb0b585d02e57a771c5336c7df4
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
I still have no idea how to fix this properly given the absolute mess
of QWidgetLineControl. For now add a failing test.
Change-Id: Ieb5ad6994c8ce7deb0cd0f2f47d51073d042244e
Task-number: QTBUG-49295
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The parser in QMakeSourceFileInfo::findDeps() would step over the
closing quote of a string, only to have a for loop then step over the
character just after that closing quote, which was thus never studied;
this could lead to problems in various ways. Fixed that and expanded
findDeps() test to catch regressions.
Task-number: QTBUG-17533
Change-Id: I7dec5222e38fa188495b39376ffee70bc7bbc87f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It makes little sense to give focus to a hidden widget; in order
to make the treeview visible, we need to set the view mode to Detail.
Change-Id: I453111e83593a790a656651b603a9c9b1a78dd9d
Task-number: QTBUG-7690
Reviewed-by: Jan Blumschein <jan@jan-blumschein.de>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
... otherwise we would not detect subsequent file/directories added
into the non-removed one.
Change-Id: I43018dfb9a9c6c0399190800da3f0d572ec5d8d8
Task-number: QTBUG-49307
Reviewed-by: David Faure <david.faure@kdab.com>
Replace hide() call (present in itemViewKeyboardEvent since Qt 4.5)
by reject(). Add signal spy to existing test function.
QDialog doc states that reject() will always be called on Key_Escape.
hide() is not enough: it makes exec() terminate and return the proper
value, but the signals finished(int) and rejected() will not be sent.
Task-number: QTBUG-7690
Change-Id: Ica4ae2843574478c5b9a7672f871f3ef3f16f3c9
Done-with: Jan Blumschein <jan@jan-blumschein.de>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
If the LHS is detached and has existing capacity that is large
enough to hold the RHS, re-use the memory instead of allocating
a new buffer and throwing away the old.
Change-Id: I53d42825da92c264c7301e8e771cba9fb35c321b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Can't sensibly test unless the compiler does support raw strings,
since any test that would catch qmake's (prior) inability to parse raw
strings would necessarily confuse the C++ compiler in the same way.
This even applies (in test app code) to any #if-ery around the raw
string, since tokenization happens before preprocessor directives are
resolved. So the #if-ery on Q_COMPILER_RAW_STRINGS has to be in
tst_qmake.cpp, not the test app it builds.
Change-Id: I4a461f515adff288b54fb273fd9996f9b906d11c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Commit 64a1448d87 (Qt 5.2) caused
QNetworkInterface to report address labels (a.k.a. interface aliases) as
separate interfaces. This is caused by the fact that glibc, uClibc and
MUSL copy the address label (netlink address attribute IFA_LABEL) to the
ifa_name field, which made QNetworkInterfaceManager think that it was an
interface it hadn't yet seen.
Address labels are the old way to add more than one IP address to an
interface on Linux, for example:
ifconfig eth0:1 192.0.2.2
Those do not create a new interface, so the "eth0:1" label maps to the
same interface index as the parent interface. This has been deprecated
for 10 years, but there are still tools out there that add addresses in
this manner.
This commit restores behavior compatibility with Qt 4.2-5.1. The Qt
5.2-5.5 behavior is incorrect because it reports more than one interface
with the same index. On systems configured like the above, the
tst_QNetworkInterface::interfaceFromXXX test was failing.
Change-Id: I8de47ed6c7be4847b99bffff141c2d9de8cf7329
Reviewed-by: Richard J. Moore <rich@kde.org>
It should compile, since the std::shared_ptr does.
[ChangeLog][QtCore][QSharedPointer] Fixed a problem that would cause a
compilation error when constructing a QSharedPointer of a const type
when the type derives from QEnableSharedFromThis.
Task-number: QTBUG-49748
Change-Id: I8de47ed6c7be4847b99bffff141c84f5e0b6bea8
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QColor always uses unpremultiplied alpha, but the new QImage methods
were based on the QRgb versions which might be either. This patches fixes
the two new methods so they treat QColor alpha correctly.
Change-Id: I78a5b875ad4e78ad7fde3b811c6187482b4f6d15
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Introduce QVERIFY2() to get some information when exactly it fails.
Change-Id: Icaddf2ecae434d0bafc90c18458c5ee067dfd506
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
This follows up 130c2baa93.
Change-Id: I2f6c9b4f995af427cec9a2162b782039debf8564
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Only add C++14 to the project configuration when C++14 support is
available on the platform. Adding it because the platform supports
C++11 doesn't work when the platform _only_ supports C++11 (e.g.,
QNX 6.6.0).
Task-number: QTBUG-49491
Change-Id: I15de38bb06d912a314b9dd18c80b513cc06a855e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use SW_SHOWNORMAL instead SW_SHOWNOACTIVATE as a parameter to
ShowWindow() to enforce the window to be restored to normal state,
even if the state before minimized was maximized.
Task-number: QTBUG-48449
Change-Id: I9436623b1495f574a72050e50e8b31bfc83ced5c
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
The old code was extremely inefficient, and QCollator
can provide the same functionality in a much better
and faster way.
Task-number: QTBUG-30902
Change-Id: Iaf5dbe587d9a6ebca26885259fdee74a29d3c84f
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
QVariant was using QColor::name() to convert a color to string, which by
default loses alpha value. The patch is fixing the problem by always
including the alpha value in the string when required.
[ChangeLog][Core][Variant] QVariant(QColor)::toString() uses
QColor::HexArgb format when the alpha component is different from 1.
Task-number: QTBUG-37851
Change-Id: I887460c1ea151180ba99d64dd873ba9d6e2268f2
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
In QMenuPrivate::hideMenu(), delay clearing of 'causedPopup.widget'
to after the QMenu::close() call, so that it is still accessible
in QMenu::hideEvent() which calls QMenuBarPrivate::setCurrentAction(0)
if the caused widget is a QMenuBar.
Task-number: QTBUG-47377
Task-number: QTBUG-49592
Change-Id: Idbda48e918dae799afea84068a60d7383d7b4971
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The platform window geometry can be misleading until it has
been properly positioned and
QWindowPrivate::resizeEventPending has been cleared.
Task-number: QTBUG-49588
Task-number: QTBUG-48396
Change-Id: Ie065f62478fc8522a9ad51391bb897510afa5aad
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Remove unused ctors and dtor, add Q_OBJECT, indent,
privatize slots, don't check for nullptr before
delete'ing a pointer, and add one override keyword.
Setting test_box (a QPointer) to nullptr is already
done by the variable's default ctor.
Change-Id: I13f06dc8104ef1c0ac08a25c960641c076f10499
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Replace hardcoded interval by QTRY_COMPARE() ensuring that all tasks have
finished, since otherwise QThreadPool::tryStart() fails in the next run.
Remove blacklisting for MSVC2012 since it is not compiler-specific.
Task-number: QTBUG-49654
Change-Id: If49b6eb9ef4da4ba2911839166c397d84c175e00
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Ensure the test works in a working directory with read-only
permission and that the file names are unique.
The test can then be executed repeatedly by COIN even in case
left-over hanging process helpers still lock the files. Also
disambiguate the "data" files used by various tests.
Task-number: QTBUG-47370
Change-Id: I3b9c7b70828da78f400196fcbba27bc61ea4538f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Introduce constants and make the interval for the 2nd thread a bit
longer.
Task-number: QTBUG-49653
Change-Id: I92ac0494ec6c9af5bde858007d08e26210215434
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Introduce a base class for the threads that ensures termination in the
destructor to ensure all QThreads instantiated on the stack are terminated.
This should reduce crashes since the test thread classes have pointers
to stack variables of the test slots.
Set object names on the threads for better diagnostics.
Decouple wakeOne()/wakeAll() that impact each other via the static count
variables of the thread class by introducing a base class WakeThreadBase
keeping a pointer to an QAtomicInt count variable on the stack instead
(similar to the existing pointers to the mutexes, etc).
Task-number: QTBUG-49653
Change-Id: I73537386bf36019efa81e8e24ba9af92506f7794
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
It was used to verify waitForFinished() and printed QProcess::errorString()
on failure, which is misleading, since the process is not
in an error state - it is still running. Example:
QWARN : tst_QProcess::setStandardOutputFileAndWaitForBytesWritten() QProcess error: 5: Unknown error
FAIL! : tst_QProcess::setStandardOutputFileAndWaitForBytesWritten() 'ret' returned FALSE. ()
Use a plain QVERIFY instead.
Task-number: QTBUG-47370
Change-Id: Iacfa6e1a5ffd2be4e1257a27a400ccc59671e8c8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Silence warning:
Don't know how to handle 'hint', use qRegisterMetaType to register it.
Task-number: QTBUG-49623
Change-Id: Iec0a823c7af87eddd9a3f126a1b970da1ff2f03f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Move the code from cleanup() into a separate cleanupTestData()
and call this from initTestData() and cleanup(). Remove slot init().
Change-Id: I4e7b5b89197ed0aa50f46f730e9c1d9c59749614
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Use a QTemporaryFile in readFromFileAfterJunk() instead writing
to the current directory which might not have write permission.
Enclose each call to QFile::open() in QVERIFY2() with error message.
Change-Id: I3c5da31c6681a2396cee473cafe7d92c5c220de3
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Create a temporary directory instead of writing to the
test data directory or home path (Android).
Change-Id: I6af583e5da91eefb603eaae179e7d789487dc626
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Check that we can use std::forward, and that the compiler
synthesizes move special member functions when it should.
MSVC only supports the latter since the Nov 2013 CTP,
which, for our intents and purposes, means VC2015.
Change-Id: I8d8e4ae064abce90076a05b3b637950ab7d21dac
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Check that it works on C arrays, with auto type deduction
and with types that only provide free begin()/end()
functions that can only be found through ADL.
Change-Id: I760722a0f56c9ebe967070ff68af90b96ed77e66
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
A loop to skip space and comments was meant to break on anything else
but would have not broken on a division operator (where it should) due
to it getting caught in the check for a comment-start, without falling
back suitably when it didn't complete that check.
Managed to contrive a suitably twisted change to findDeps test to
reveal the bug; broken previously, now fixed. Not ideal, as it relied
on another bug to fail previously - backslash-newline shouldn't end a
preprocessing directive line - but it should still pass once that's
fixed, too. Exercising a bug in qmake usually involves code that
won't compile anyway, making it tricky to write a test that reveals
the bug but that passes once it's fixed.
Change-Id: I08a1d7cc5e3d7fd1ac0a48e5c09dfdfbb7580b11
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Currently QOpenGLWidget and QQuickWidget do not support having native
child widgets inside the same top-level window. In some cases this is
inevitable, f.ex. multimedia may require native windows when used from
widget apps. winId() calls made for various (valid or invalid) reasons
are also problematic.
There are no blockers for supporting this setup, however. By storing
multiple texture lists (one for each subtree where the root is a
native widget), adding the missing markDirtyOnScreen calls, letting
each native widget access the correct texture list (i.e. the one
corresponding to its children) when they are (separately) flushed, and
fixing composeAndFlush() to take the update region and the (native
child) offset into account, it can all be made functional.
The change also fixes the issue of keeping GL-based compositing
enabled even after all render-to-texture widgets in the window become
hidden. Due to the changes of how such widgets are gathered,
composeAndFlush() is not invoked anymore when no such widgets are
discovered for a given native parent. This is great since having
compositing enabled infinitely is an issue for applications like Qt
Creator that implement certain views with QQuickWidgets but cannot
afford the cost of texture uploads in other places (e.g. for the text
editor) on slower machines.
The openglwidget manual test is greatly enhanced to test various
situations (MDI, scroll areas, tab widgets, QOpenGLWidget as native
child, QOpenGLWidget with non-tlw native parent, etc.)
Task-number: QTBUG-48130
Task-number: QTBUG-49172
Change-Id: Iad098359c8bcf749f01c050da0853415e1550eda
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
The ppm decoder used a fixed size buffer to discard comment lines,
which would fail for comments longer than 100 characters.
Task-number: QTBUG-49414
Change-Id: I92e910e025cf7584a6ff1c0e5b0e8a4ab281d479
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Call begin/endResetModel() in QSqlQueryModel and all
derived classes.
Task-number: QTBUG-49404
Change-Id: I11492d6386efb4c945c246a6379aaa6ca4502a25
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
When that happens, we need to detach (in-place conversion won't work),
so we recurse back into the same function, but the template version that
does detaching.
Task-number: QTBUG-49181
Change-Id: Idba8c29717f34c70a58fffff1412fea3acc95f98
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Extend the current BLACKLIST to cover all all Windows versions
and add watchFileAndItsDirectory:native backend-testfile.
Task-number: QTBUG-30943
Change-Id: Ic58c090f23d3584843bc1e74eba533d75c530ad3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Apple changed some enums in the 10.11 SDK from being just:
enum { ... }; typedef uint64_t Foo;
to:
typedef CF_ENUM(uint64_t, Foo) { ... };
which in C++11 mode expands to:
typedef enum Foo : uint64_t Foo; enum Foo : uint64_t { ... };
The use of strongly typed enums means we need to explicitly cast from
int in the places where we know what we are doing.
Change-Id: I7c8cfdbc0549471a3292de14d8b766fe17133e25
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
This is due to the Gtk style in use. It is already blacklisted for
Ubuntu and in Qt 5.7 we'll use Gtk 3, so there is no reason to invest
into fixing this.
The test used to pass because we would build with -no-gtkstyle.
Change-Id: I1cf26301ba8b19be9a995837b0b5984838ec777a
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
tst_qmenubar::taskQTBUG4965_escapeEaten
tst_qtabbar::sizeHints
These tests will not pass when Gtk style is enabled, similar to the Ubuntu
blacklisting.
Change-Id: I590d84fb7ce0df28d0e8525e0f04b676280a12ff
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
Test that stepping into the missing hour lands us somewhere sane.
Check that raw instance and product of .toLocalTime() agree.
Task-number: QTBUG-49008
Change-Id: I430382ae223bcb43b151d2d6054ecbdd7edc8a47
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is follow-up for QTabBar fix ea47d152b3.
In native OS X applications using mouse wheel on combo boxes have absolutely no
effect. We should bring the same behavior to Qt based OS X apps too, as users
are complaining of unexpected behavior, eg. randomly switching Qt Creator
sidebar mode when scrolling file list and moving mouse pointer little bit
above. Moreover inertial mouse behavior on OS X makes combo box usually move
several indexes, rather than single one on slight finger slide.
This also applies to iOS apps so the change affects all Apple platforms.
Task-number: QTBUG-10707
Change-Id: I6582265039198707ad8c2f54de96ee2a0b0e0b47
Reviewed-by: Adam Strzelecki <ono@java.pl>
Reviewed-by: Jake Petroules <jake.petroules@theqtcompany.com>
warning: 'typemsg1' may be used uninitialized in this function [-Wmaybe-uninitialized]
Change-Id: Ie68d279eccb003a2ca5a0116eea336cbc8776660
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Introduce class ExecCloseHelper which runs a timer
timer checking for the test candidate to become
the active modal window and closing it either
by key event or calling close.
The test then runs in 4s as opposed to 45s before.
Task-number: QTBUG-38890
Change-Id: I610fb09e6b8269d218cddc8d11abae2bd3317f9d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
A QAbstractSocket can be close()'d at any time, independently of its
current connection state. being closed means that we cannot use it to
read or write data, but internally it might still have some data to
send or receive, for example to an http server. We can even get a
connected() signal after close()'ing the socket.
We need to catch this condition and mark any pending data not yet
written to the socket for resending.
(cherry picked from commit 0df5d07929)
Task-number: QTBUG-48326
Change-Id: I67d9ad36f7288c9c6bef51aa6253d7b187737601
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
* Georgian lari currency symbol
* A large collection of CJK unified ideographs
* Emoji symbols and symbol modifiers
* Letters to support the Ik language in Uganda, Kulango in
the Côte d’Ivoire, and other languages of Africa
* A set of lowercase Cherokee syllables, forming case pairs
with the existing Cherokee characters
* The Ahom script for support of the Tai Ahom language in India
* Arabic letters to support Arwi—the Tamil language written in the Arabic script
For more details, see http://www.unicode.org/versions/Unicode8.0.0/
[ChangeLog][QtCore] Unicode data updated to v.8.0
Change-Id: If255f95c9c45655b721369a116299da3cabbba0a
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
A dialog embedded into QGraphicsView has Qt::WA_DontShowOnScreen set
(similar to a native dialog). It must not trigger the modal handling
though as not to lock up.
Task-number: QTBUG-49124
Change-Id: I22ce3f18d01df017b9317666770686bd4491387f
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
When rebuilding the tab bar after hiding several dock widgets,
the index gets offset.
Task-number: QTBUG-49045
Change-Id: I05f6a976ca1d8c6f7cdf6532f1a728483398eabc
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This test keeps on failing on Windows 8 with 32 bit.
Let's add the platform despite this one test failing.
Change-Id: Id6a2b3e0b587d3cff29d1f616d5edacfcf68746d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
After canceling the asynchronous read operation, the
notified() slot receives ERROR_OPERATION_ABORTED.
We must not handle this situation as an error.
This amends commit 5ce567c5.
Task-number: QTBUG-48336
Change-Id: Iff948ceb3ad1f805a9de8c188fbc39ed4c76ba82
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
If the future is finished when a watcher starts watching it, it is
perfectly reasonable for the watcher to get the finished message
promptly. If you pause the watcher before any message loops get to
run, the message presently won't get through until the watcher is
resumed, but there is no reason to guarantee that; indeed, one could
consider it somewhat perverse behavior.
So move the reportFinished() calls to after the pause()s.
Also eliminate a used-once local variable and use QTRY_VERIFY() in one
place where qWait() was used before.
Change-Id: I4bc6091fd7437a4d341be511b7a140f3d72d850e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Attaching spies afterwards was provoking a warning during tests:
QFutureWatcher::connect: connecting after calling setFuture() is likely to produce race
Change-Id: I6ee8c3613cecebd1c69b0337139d8a19a33f4a11
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Different multicast tests fail on different platforms for different reasons.
Blacklist them to get rid of insignificant and later fix/un-blacklist.
Change-Id: I91548366c7666478ea1cc446bbf337becfdefd49
Task-number: QTBUG-46612
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
As a follow-up for 5c1b9bbdf1 disable the
test on all platforms, since it fails on newer openssl. This was now
also happening on Windows, so until a fix is there, skip the test.
Change-Id: I6c8822c0ac5411b1114e9cd426219574ab1c9b54
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Skip the correct number of bytes in the read buffer when expanding '\n'
into "\r\n" upon writing.
Change-Id: I5b01fc47c330dee5c83001abf0acd7d63d790b96
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This may result in incrementing an invalid iterator after the
iterator's container has changed. Also, for this to happen,
the view needs to have an active editor.
The reentrant call happens as follows in QTreeView, after the
model adds new rows to the view:
QTreeView::rowsInserted()
QAbstractItemView::rowsInserted()
QAbstractItemView::updateEditorGeometries()
QTreeView::visualRect()
QAbstractItemViewPrivate::executePostedLayout()
QTreeView::doItemsLayout()
QAbstractItemView::doItemsLayout()
QTreeView::updateGeometries()
QAbstractItemView::updateGeometries()
QAbstractItemView::updateEditorGeometries()
Other concrete item view classes may be prone to the same issue.
The fix consists in relayouting the items if needed, which should
trigger calling updateEditorGeometries() again. This doesn't
invalidate previous optimizations regarding item relayouting since
we only force relayouting when it'll be done by visualRect().
Change-Id: Id31507fdc8d9a84d50265298191d690d1a06792b
Task-number: QTBUG-48968
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This test hasn't been run for years, so clean up. And besides, it's
extremely fragile and would depend on how IBM packages their OpenGL
libraries.
Change-Id: I1d0f78915b5942aab07cffff140f9db5a09ee7e2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Compare against isVisibleTo() in QLineEditIconButton::actionEvent()
so that action events received before show() are handled correctly.
Fix a regression introduced by change
4dccb2ca67 for handling action
events causing side widgets to overlap when added before the widget was
shown. Use QAction::isVisible() to determine visibility.
Task-number: QTBUG-48806
Task-number: QTBUG-48899
Task-number: QTBUG-39660
Change-Id: I7a39a3b9a094f2c74cde09544f1158deb2b81cf2
Reviewed-by: David Faure <david.faure@kdab.com>
This was never a documented feature, but happended to work before Qt 5.5.
It broke because the peoperty access went into the static function and are
now prefixed with '_t->'
So restore the behavior as it was by not including the parentheses in the
member name.
Task-number: QTBUG-47695
Change-Id: Ic3509ddea7ac9abc871e71f5bfbe81d04d08e9bc
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Remove the insignificant_tests CONFIG option in favor of a BLACKLIST
file. The test blacklisted have been found using CI builds logs.
Change-Id: Iac07316862cff9b5085dacdf9f35e691cff09384
Task-number: QTBUG-27571
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
- Avoid duplication of slashes and use static variable for the
const part in settingsPath().
- Do not run expensive cleanup twice in init()/cleanup() as was
before by moving the code into a separate cleanupTestData()
function called from cleanup() and initTestCase().
- Use QDir::removeRecursively() (which should be able to deal
with readonly files, etc after 26bcc0565f )
instead of system calls or the special removePath() function for
CE/RT.
- Switch QStandardPaths into test mode.
Change-Id: Idcde2d17020eae1ea43e448266e3940c06f174ef
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
QLatin1String wasn't really tested except as a drive-by.
Unearthed a discrepancy with docs. Fixed the docs.
Change-Id: I1246bb33888132edbc4e22da792a480a156357bf
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Check whether the action under the mouse is enabled before closing.
Task-number: QTBUG-48493
Change-Id: I2a0669840b9b6c81dacdf179325301c02f1c0c35
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The delegate may be null in QHeaderView.
Task-number: QTBUG-48543
Change-Id: I4d3ba104b0b57431e8765271dc2dc880be096672
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Numbers formatted in the C locale should not use group
separators by default.
[ChangeLog][QtCore][QLocale] The C locale does not use group separators
when formatting numbers any more.
Task-number: QTBUG-4044
Task-number: QTBUG-3068
Change-Id: Ia647a72efc11fecd66d22f9253562b1d4ef58168
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If a macro is used with too few parameters, complaining about its
definition using '#' followed by something other than a macro
parameter name is apt to be confusing - reading the definition will
reveal that the name in fact is a macro parameter after all. The
reader needs attention directed to the invocation, not the definition.
Split the test in two: one to test the prior error message does in
fact get produced for an invalid macro definition, the other to test
the invalid invocation case.
Task-number: QTBUG-46210
Change-Id: Ie177a56d346e553bf9d67e2008a4352633afa1ae
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It simply is missing. We could wait for QStringView to come around, but
I need this function in uic _now_, so let's add it.
[ChangeLog][QtCore][QTextStream] Can now stream QStringRef without converting
to a QString first.
Change-Id: Idd178e0ba8a89c025f4533d46de912cbdb3883d5
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Now all Qt sequential containers consistently provide reverse iterators.
The associative ones, by way of not returning std::pair from op*, can't
just use std::reverse_iterator. They would miss .key() and .value() methods.
So that has to wait for 5.7.
The reverse versions of the new key_iterators can also just use
std::reverse_iterator, but I'm afraid that after bikeshedding over
keyRBegin() vs. rKeyBegin() vs. reverseKeyBegin() vs. rkbegin()
vs. krbegin() (<-- of course, what else?), it would anyway be too
late for 5.6, so defer, too.
[ChangeLog][QtCore][QLinkedList/QSet] Added rbegin(), crbegin(), rend(), crend(),
and reverse_iterator and const_reverse_iterator typedefs.
Task-number: QTBUG-25919
Change-Id: I58316fffade469e9a42c61d7aa1455ae3443fd94
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
A QAbstractSocket can be close()'d at any time, independently of its
current connection state. being closed means that we cannot use it to
read or write data, but internally it might still have some data to
send or receive, for example to an http server. We can even get a
connected() signal after close()'ing the socket.
We need to catch this condition and mark any pending data not yet
written to the socket for resending.
Task-number: QTBUG-48326
Change-Id: I6f61c35f2c567f2a138f8cfe9ade7fd1ec039be6
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Previously, only QXmlTestLogger had timers to take elapsed times
and log them. Move those into class QTestLog for access by
the loggers and output the times in the crash dump to make it
easier to spot hangs/recursion crashes.
Produces:
QFATAL : foo() Received signal 11
Function time: 22ms Total time: 23ms
A crash occurred in ...
Function time: 24ms Total time: 26ms
Task-number: QTBUG-47370
Change-Id: Ia530a63104087daffc9a15f68c15d93378b9407e
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
After calling connectToHost(), the socket enters HostLookup state. At this
stage, the socket engine was not created yet, and writing to the socket
should result in either data buffering or an error. So, add a check for
d->socketEngine to prevent a crash on unbuffered sockets.
Task-number: QTBUG-48356
Change-Id: I15ea9ce7de97ce6d7e13e358eca5350745b556bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
If QTimer::singleShot() is used with a functor callback and a context
object with different thread affinity than the caller, a crash can
occur. If the context object's thread is scheduled before
connecting to QCoreApplication::aboutToQuit(), the timer has a change
to fire and QSingleShotTimer::timerEvent() will delete the
QSingleShotTimer object making the this pointer used in the
connection invalid. This can occur relatively often if an interval
of 0 is used.
Making the moveToThread() call the last thing in the constructor
ensures that the constructor gets to run to completion before the
timer has a chance to fire.
Task-number: QTBUG-48700
Change-Id: Iab73d02933635821b8d1ca1ff3d53e92eca85834
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Calculation was working as long as one didn't use per pixel scrolling.
Task-number: QTBUG-48579
Change-Id: Ie02e28b008c5c81ed45d7dd17fed96148c23b598
Reviewed-by: Thorbjørn Lindeijer <bjorn@lindeijer.nl>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][QtCore][QMetaProperty] write() now resets the property if an
empty QVariant is given, or set a default constructed object if the
property is not resettable
Change-Id: I9f9b57114e740f03ec4db6f223c1e8280a3d5209
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
if t >= QMetaType::User, we would not return false nor call convert.
We would then pass a pointer to whatever is in the QVariant to the
qt_metacall that is expecting a pointer to an object of a different type.
Since we have custom converters, we can call QVarent::convert even for
custom types anyway.
[ChangeLog][QtCore] Fixed crash when setting a QVariant of a different
type to a property of a custom type. Attempt to do a conversion instead.
Task-number: QTBUG-40644
Change-Id: Ib6fbd7e7ddcf25c5ee247ea04177e079f6d7de35
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Also re-enable and update the tst_showWithoutActivating test.
Change-Id: Ic7fa9b1bf7637e4661c593aaeabb3220cd4204ff
Task-number: QTBUG-46098
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
QVersionNumber is now public API.
Change-Id: I5b21b6ce5f1651158b6f29bc6f06e5d4e133bed8
Reviewed-by: Keith Gardner <kreios4004@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
OldPersistentIndexes store selected items during sort operation. They
were wrongly taken from static list of indexes. This change takes them
from parent (QTableWidget) who maintains the list of selected segments.
Task-number: QTBUG-48408
Change-Id: Ie1bc4071a275dd76d113d883ab30ccd4cb1fa625
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The error return has been observed to vary.
Task-number: QTBUG-48566
Change-Id: Iecfe7819898a6a8a482c1b2251543193ecfa4841
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Source files should not be executable.
Change-Id: If9b9eaa6c8c7348ca6f48fa9253f3540e95aca37
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
- Introduce consistent error messages for failing QFile::open()
and existence checks to make errors about non-available
UNC paths on Windows clearer.
- Introduce a guard class to ensure the stdin reader processes
are terminated properly in case of failures, which currently
occur for MSVC2015.
- Fix brace coding style and remove unnecessary QString
conversions.
Task-number: QTBUG-48504
Change-Id: I890b13088558ef05391fb152a6b815276df0fe8c
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Introduce error messages showing the path in file existence,
file type and directory entry list tests to make fails related
to missing UNC shares clearer.
Task-number: QTBUG-48504
Change-Id: I5fb401b94cfa8b58562a906b8d9765039e334027
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
It's accessed by QFutureWatcherBase::isFinished(), potentially before
anything has set it. It gets to be initially true until setFuture()
has given it us unfinished future and set it false.
Add a regression test for matching state in future and watcher.
Task-number: QTBUG-12358
Change-Id: Iae7bdaa434ab80f518afe4d7d55df99c391991a4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
- tst_QProcess::fileWriterProcess()
- tst_QProcess::readLineStdin()
- [tst_QProcess::readLineStdin_lineByLine()
The test fails apparently due to a bug in its runtime library
(fread() dropping data).
Task-number: QTBUG-48455
Task-number: QTBUG-48504
Change-Id: I972e560e88312cea0d3dbcea9450c59285a15d5a
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Verify exit status and code where applicable. Avoid unnecessary
data conversions in fileWriterProcess. Improve error handling in
helper processes.
Task-number: QTBUG-47370
Task-number: QTBUG-48455
Change-Id: Ib5c4f546027131db02caaa05154a5880edac5cf7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code still produces Internal Compiler Errors in release mode.
Task-number: QTBUG-46344
Change-Id: I86d3608b13a197a0b65b83829d1512203e1578f8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Use QVERIFY2() with QTemporaryDir/File::errorString() consistently.
Attempt to catch issues like the below warning and follow-up issues.
QSYSTEM: tst_QFiledialog::clearLineEdit() QFileSystemWatcher: FindNextChangeNotification failed for "C:\Users\qt\_____aaaaaaaaaaaaaaaaaaaaaa" (Access is denied.)
Task-number: QTBUG-47370
Change-Id: I58a6e87c502627e976efa62ad73c912f3b2d49fa
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
QByteArray::operator< and friends had their logic reversed.
Task-number: QTBUG-48350
Change-Id: I625209cc922b47e78dfb8de9fe100411f285a628
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test caused problems because it relies on the at-spi services to
run. In addition it could trigger orca (screen reader) to be launched
as a side-effect of the dbus call to the screen-reader-enabled setting.
Instead just export QT_LINUX_ACCESSIBILITY_ALWAYS_ON to make sure that
accessibility will work. This means we won't test the dbus startup any
more, but the test will be reliable.
There is still a dbus call to org.a11y.Bus to launch the service in case
it's not running yet.
Task-number: QTBUG-27732
Task-number: QTBUG-44434
Change-Id: Idb86ed98ca4b47cb209027c8b41529e7e5285197
Reviewed-by: Caroline Chao <caroline.chao@theqtcompany.com>
Instantiate the QProcess object on the stack to ensure resource
cleanup and remove the QProcess * member variable.
Use qobject_cast<QProcess *>(QObject::sender()) instead
of the member variable in the helpers slots to ensure that signals
from a leaked QProcess do not interfere with other tests.
Task-number: QTBUG-47370
Change-Id: Ifc0dccb7e4b18069d236df53bccdcb6a47df6346
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
QDateTime values with a UTC offset are not correctly serialized with
QDataStream::Qt_4_0. So use a newer QDataStream format for this type and
mark it with "@DateTime" instead of "@Variant".
Task-number: QTBUG-46551
Change-Id: I211c89e8cd0211c949ec993e6ffd5192d0eebbb3
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Left and right were swapped which caused invalid selection ranges to be
emitted through selectionChanged.
Task-number: QTBUG-48402
Change-Id: I18692c2b50c49ab39065f9b360b37b7615227ee9
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Use case insensitive comparison and static invocation
of QGuiApplication::platformName().
Change-Id: I8c197c7b4f0669f71c019fbcee09a0f03dfab399
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
The explanation is in the code comment. Ever since QDBusConnections
began being processed in a separate thread, we were relying on the fact
that the main thread didn't begin processing its event queue until the
second event got posted (the event loop only exits after it has finished
processing all pending events). We had a race between the main thread
starting its processing, at which point it decides which is the last
event it will process, and the QDBusConnectionManager thread posting the
second event.
This is very fragile code, since it depends on the behavior of
QDBusConnectionPrivate (how it stores the signal relays in a hash) and
that of QHash with duplicate keys. This only works because the hash
key between the two connections is the same (it's only dependent on the
method name and interface name). If we ever begin using something that
isn't the same between "control" and "p", then with QHash's randomness,
we'll be racy again.
Change-Id: I42e7ef1a481840699a8dffff1406c3a4674ec3a6
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
The test assumed that an event loop can be tested for emptiness
multiple times, which is wrong because an event can be delivered any
time.
Change-Id: Ic44245321eeed2091b640ada2c83d205b83a1cc2
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This test when running on Windows has a race condition since in qthread_win.cpp the
finished signal is emitted before everything is cleaned up.
Change-Id: I3c03d9a245e297e8f79b2be2c34398bf7bac9bae
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Most processors have carry flags which they set on addition overflow, so
it's a good idea to access them whenever possible. Most of them also
have widening multiply instructions that can be used to detect overflow
of the non-widening version.
Tested to compile on:
Architecture Compiler
x86 GCC 4.9, GCC 5*, Clang 3.6*, ICC 16 beta
x86-64 GCC 4.9, GCC 5*, Clang 3.6*, ICC 16 beta
x86-64 ILP32 GCC 4.9, GCC 5*, Clang 3.6*
IA-64 LP64 GCC 4.8
ARMv7-A GCC 4.9, Clang 3.6*
AArch64 Clang 3.6*
MIPS GCC 4.9, Clang 3.6*
MIPS64 GCC 4.9, Clang 3.6*
PowerPC GCC 4.9, Clang 3.6*
PowerPC 64 GCC 4.9, Clang 3.6*
SPARC Clang 3.6*
SPARCv9 Clang 3.6*
[*] supports the intrinsics
If the compiler does not offer a way to detect an overflow, we do it by
hand. For unsigned additions, that's easy, since the C++ language
specifies the behavior of the overflow. That's also the reason why this
code is implemented only for unsigned integers.
For the multiplication, if the compiler does not support widening
multiplications, we do it with a division instead. This is necessary for
GCC < 4.5 and compilers not compatible with GCC or MSVC.
Change-Id: I049a653beeb5454c9539ffff13e637de0f1338c1
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The timeZone() function used to assert when called on such an object
(or, for a release build, return an invalid time zone).
Change-Id: I6ae8316b2ad76f1f868e2498f7ce8aa3fcabf4a6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Without piping the output to /dev/null, we'd get the following:
sh: dbus-send: command not found
And if dbus support is only limited to runtime support, we don't
treat it as a fatal error and only notice the user.
Change-Id: Ia7750a074b8d563bf9694fa8fa628b4017e8bb68
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When working with QGraphicsView/QGraphicsScene, touch events are sent to
QGraphicsView's viewport() event handler, which then dispatches it to the
corresponding QGraphicsItem, if any. In the case of QGraphicsProxyWidget, we
need to forward these touch events to the encapsulated QWidget, otherwise it
will never receive them (i.e. the event chain for touch events terminates at
QGraphicsProxyWidget).
This also enables QWidgets associated with QGraphicsProxyWidget to grab
gestures.
Task-id: QTBUG-45737
Change-Id: Ia441d3576afb6c97376be6f2ff073901e6e928a5
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
The derived classes (QSpinBox, QDoubleSpinBox, QDateTimeEdit, QTimeEdit)
set various input method hints on the spin box in the init() methods
of their private classes which did not have any effect since
QAbstractSpinBox::inputMethodQuery() was implemented to return the
hints of the embedded QLineEdit only. Change it so that hints set
on the QAbstractSpinBox are also considered.
Change-Id: I76b7c4d3e0869589c110cf3a0b2c3f94201db5d5
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
In some cases it's not possible to use QT_HASH_SEED, specially when
we need to set the environment variable from inside the application,
as dynamically loaded libraries or plugins may create static QHash
instances. That would set qt_qhash_seed to a value different from
-1 and skip the env var value.
For those cases, and when we still want to set qt_qhash_seed, we
provide a way to enforce its value.
Auto-tests accessing qt_qhash_seed directly have been updated
accordingly. Usage in qdoc, uic and rcc has been left as is
for the time being.
Change-Id: I3b35b4fa0223c83b1348a6508641905a2a63266f
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The test is moved from tst_qtreeview to tst_qtreewidget as it tests
qtreewidget class.
C++ usage is fixed, there was an illegal C cast that was causing crashes
Change-Id: I80e90a9b531e87f9b133186b6f48be42f54901b5
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
According to MSDN, the zero value of ICONDIRENTRY bHeight and bWidth
fields mean a maximum icon size 256 pixels. So QtIcoHandler::option()
should return 256 instead of 0 pixels for such icons. Also there is
fixed wrong seek offset at the second call on this method.
http://blogs.msdn.com/b/oldnewthing/archive/2010/10/18/10077133.aspx
Task-number: QTBUG-48103
Change-Id: I99f0c9720fd58889045b0c73c51498f2065b0b91
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
By serializing the capitalization value of QFont, it ensures that it is
correctly preserved when QPicture streams it and later plays it back.
Subsequently the QDataStream version has been bumped up to account for the
change of the data format for serializing QFont.
[ChangeLog][QtGui][QFont] QFont now serializes the capitalization setting.
[ChangeLog][Important Behavior Changes] QDataStream version bumped up to
17 to account for changes in the serialization of QFont.
Task-number: QTBUG-15214
Change-Id: I042680760e5a69d18d41e786b7500a3eebbe562f
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
It sends a shortcut override event directly, which should go
though QPA anyways.
Change-Id: Ie2c6f45cd44222cd9be8846099573dcd2968a77c
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
P2P connections don't have senders and receivers, so asking
QDBusConnection to connect to a signal with a sender was a mistake
(added in 5368e44a86). Due to an internal
bug, this never presented itself -- double fault.
Fix the connection so that we don't get unit test failures when the bug
is solved.
Change-Id: I9a75ad8521ae4e5cbbe5ffff13d1a78b7dea6d07
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
With kdbus, we won't have a regular signal, but instead a special
message. So keep the logic of what to do in QDBusConnectionPrivate.
The #ifdef is to make sure the bootstrapped qdbuscpp2xml continues to
build in cross-compilation environments.
Change-Id: Iee8cbc07c4434ce9b560ffff13d06f0d9904cb6d
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Now we know that all timers and socket notifiers get created only in the
QDBusConnectionManager thread.
Incidentally, this reduced code duplication.
Change-Id: I27eaacb532114dd188c4ffff13d5075a8d2efb0b
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Each application will have one thread dedicated for this, for all
QDBusConnections. I wouldn't mind sharing such a thread with other uses
in Qt, provided none of them ever block (the QProcessManager thread
comes to mind, but it's going away soon).
The cost associated with this change in this commit is so far rather
minimal. All incoming D-Bus calls need to be handled after an event is
posted anyway, to avoid deadlocking on reentering libdbus-1 functions
that acquire locks still held. The cost is the one more thread running
and the cost of synchronizing them when an event is posted.
The benefits far outweigh that cost: no longer will we have problems of
QtDBus failing to run if the main system or session connections are used
before QCoreApplication is run. Moreover, events can be received and
handled in aux threads even if the main thread is blocked on some
operation.
Note: this commit may not be testable (tst_qdbusconnection may fail)
Task-number: QTBUG-43585
Change-Id: Ic5d393bfd36e48a193fcffff13b737556ccd11a8
Reviewed-by: Albert Astals Cid <aacid@kde.org>
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
This simplifies the code a little by having a single code path. More
importantly, we no longer need to call the evil function
dbus_connection_send_with_reply_and_block. That function acquires a lock
on the socket transport inside libdbus-1, which means all threads need
to wait until the one call gets unblocked before they can continue.
To do that, this commit reimplements the QDBus::Block part of
QDBusConnectionPrivate::sendWithReply by reusing the existing call to
sendWithReplyAsync() and then doing a blocking-wait with
QDBusPendingCallPrivate::waitForFinished().
By using (Q)DBusPendingCall and the threaded connection approach (next
commit), now we never block on the socket. That also means the code to
call dbus_pending_call_block() is no longer necessary and the
waitForFinished() function itself can be considerably simplified.
As a side-effect of no longer blocking, a number of pre-existing race
conditions that used to be hidden showed up.
Note: this commit deadlocks without the threading (next commits).
Task-number: QTBUG-43585
Change-Id: Ic5d393bfd36e48a193fcffff13b73754954a3f7d
Reviewed-by: Albert Astals Cid <aacid@kde.org>
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
To handle network events, QEventDispatcherWin32 uses I/O model
based on notifications through the window message queue. Having
successfully posted notification of a particular event to an
application window, no further messages for that network event
will be posted to the application window until the application
makes the function call that implicitly re-enables notification
of that network event. With these semantics, an application need
not read all available data in response to an FD_READ message:
a single recv in response to each FD_READ message is appropriate.
If an application issues multiple recv calls in response to a
single FD_READ, it can receive multiple FD_READ messages
(including spurious).
To solve this issue, this patch always disables the notifier
after getting a notification, and re-enables it only when the
message queue is empty.
Task-number: QTBUG-46552
Change-Id: I05df67032911cd1f5927fa7912f7864bfbf8711e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
There was a small amount of time between the last readDatagram() call
and disabling a read notifier in case the socket had a pending
datagram. If a new datagram arrived in this period, this qualified as
absence of a datagram reader. Do not change the read notifier state
because it is disabled on canReadNotification() entry and always enabled
by the datagram reader.
Thanks to Peter Seiderer, who investigated the same: "Querying
hasPendingDatagrams() for enabling/disabling setReadNotificationEnabled()
is racy (a new datagram could arrive after readDatagam() is called and
before hasPendingDatagrams() is checked). But for unbuffered sockets the
ReadNotification is already disabled before the readReady signal is
emitted and should be re-enabled when calling read() or readDatagram()
from the user."
However, this patch does not completely solve the problem under Windows,
as the socket notifier may emit spurious notifications.
Task-number: QTBUG-46552
Change-Id: If7295d53ae2c788c39e86303502f38135c4d6180
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Disable input and cursor for QGuiApplication instances used in
autotest to initialize it properly.
Change-Id: I78dc9b776269c082c20f244a51f858289129275d
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
An invalid mime magic definition could lead to an assert. Replaced with
a qWarning. Move all checking to the QMimeMagicRule constructor, and do
keep invalid rules since they are need to parse child rules.
Unit test added, with QTest::ignoreMessage when using the XML backend
(there's no warning from update-mime-database when using the cache).
Also make it easier to add more shared mime info files for tests.
Task-number: QTBUG-44319
Done-with: Eike Ziller <eike.ziller@theqtcompany.com>
Change-Id: Ie39a160a106b650cdcee88778fa7eff9e932a988
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make it easier to capture information about crashing tests in log files,
since it is not possible to do something like
foo > log.txt 2> errlog.txt
on Windows.
Adapt selftest.
[ChangeLog][QtTest][Important Behavior Changes] Crash/exception
information is now logged to standard output on Windows.
Task-number: QTBUG-47370
Change-Id: I3e6a2d25855ed0f20516418a031990b562f5f757
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The logic used in the FreeType font engine can be generalized
and move to the QFontEngine baseclass. This allows the CoreText
font engine to correctly report the minimum left/right bearings,
which decreases the chance that an optimization in QTextLayout's
line breaking algorithm will produce wrong results.
The calculation of left and right bearing has been moved to the
glyph_metrics_t type to reduce code duplication. This allows us
to use the with and height of the bounding box to determine if
the glyph has any contours.
Change-Id: I864697d3f31ed56f22f04666199b6c5023c5e585
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
At the edge of the view, a line segment could end up as not producing
any pixels even if not clipped by the floating-point clip
routine. Make sure the starting point for the next line is still
updated correctly for any significant segment lengths.
Change-Id: I381a4efb81ce6006f3da4c67abf279aea79e4663
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
If Qt is not running its own event loop (e.g. if Qt is a plugin running
in a non-Qt host application with its own event loop, a call to
sendPostedEvents() should process all events by default, and not depend
on the flags passed to the last call to processEvents()
We also modify sendPostedEvents() to call its base implementation instead
of directly calling QCoreApplication::sendPostedEvents(). (The behavior of
the base implementation is the same, so no behavior change there).
This also adds a test for QWindow event handling without Qts event loop is
running. This is a black box test, just to ensure that basic functionality
is working. It can be extended later.
Task-number: QTBUG-45956
Change-Id: I7d688c0c6dec5f133fb495f07526debdde5389af
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
RCS files (text/plain) have the glob pattern "*,v", which caused
the regular expression match to fail.
Task-number: QTBUG-47923
Change-Id: I7d8682ef51306cb4da58a2b3880842bd99892ea3
Reviewed-by: David Faure <david.faure@kdab.com>
Newer test functions don't have those. Removing those comments makes
the code consistent.
Change-Id: I542b89e797ef061395ce1fc87d848195e6f81f35
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Input context selection works differently across platforms. On some
platforms it is not possible to request a specific context at all
(e.g. Wayland). This will be unified, depending on the environment
variable "QT_IM_MODULE", you will get:
- null: default (platform) context, if defined (otherwise no context)
- empty: no context
- set: set one, if it exists and is valid (otherwise no context)
[ChangeLog][Platform Specific Changes] Haromnized input context selection.
QT_IM_MODULE environment variable will be taken into account.
Change-Id: Ic8f826fbc6ace25941cd19b9b086943e848fbe01
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Nedim Hadzic <nedim.hadzic@pelagicore.com>
This commit changes the readDatagram() and writeDatagram() virtual
functions to take a QIpPacketHeader as meta data, instead of a
QHostAddress/quint16 pair. As previously, the header is an "out"
parameter for readDatagram() and an "in" parameter for writeDatagram().
The header pointer in readDatagram() is allowed to be null if the
PacketHeaderOptions indicates WantNone. Otherwise, it must not be null.
The extra options parameter is introduced because we may not always want
all the metadata upon reception. For sending, we know what to include or
not based on what's set in the incoming header parameter.
QIpPacketHeader splits sender and destination because we'll be able to
return both on datagram reception.
Change-Id: Iee8cbc07c4434ce9b560ffff13ca4213255008c7
Reviewed-by: Richard J. Moore <rich@kde.org>
QDateTime::addSecs needs to do something similar, but not identical
because it needs the number of days too. And then there are daylight
savings transitions...
Task-number: QTBUG-47717
Change-Id: I7de033f80b0e4431b7f1ffff13f976f4f5e5a059
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Mostly related to IPv6, because Q_IPV6ADDR is an array of char, so the
compilers were generating byte access to each value. Instead, force
access as 32- and 64-bit in most places that make sense (64-bit access
decays to 32-bit on 32-bit machines). In one isLoopback(), this is now a
128-bit access for best improvement.
Some smaller improvements relating to SpecialAddress by combining the
three IPv4 special addresses.
Change-Id: I7de033f80b0e4431b7f1ffff13f932b1cd7b5d21
Reviewed-by: Richard J. Moore <rich@kde.org>
Playing with the offset argument of pcre_exec is not equivalent to
adjusting the pointer to the subject string. In particular, PCRE
can go behind the offset to check for lookbehinds or "transition"
metacharacters (\b, \B, etc.).
This made the code that deals with QStringRefs not matching in behavior
with the corresponding code dealing with QStrings. For instance,
QString subject("Miss");
QRegularExpression re("(?<=M)iss");
re.match(subject.mid(1)); // doesn't match
re.match(subject.midRef(1)); // matches!!!
Instead, actually adjust the pointer to the subject string so that
the behavior is identical. A broken test that relied on the
equivalence is also removed.
Change-Id: If96333241ef59621d7f5a6a170ebd0a186844874
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Ensure QAction::setVisible() is
handled and reposition if visibility changes.
Task-number: QTBUG-39660
Change-Id: I14f0659aedc8dc89ddef3159d3a500b40b1563ff
Reviewed-by: David Faure <david.faure@kdab.com>
We don't replay mouse events after closing popups on X11.
This leads to the bug when the menu doesn't show after
clicking three times on the menu bar. It can be fixed by
reverting 78d7192338, but
then we need an alternative fix for QTBUG-32807 on Windows.
So don't replay mouse events for the menu bar on all
platforms.
Change-Id: I3db8e24a6de6f35b0a17dffac6a131f1cad42e6d
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
Give setStandardOutputFile2 a sensible name, move it to where it
belongs and remove bogus Q_OS_WINCE ifdef.
Change-Id: I5c843e8b6cb626979966f3e61f7a7c720173bb28
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Do not call bytesAvailableInChannel if the source pipe end is
invalid. This is the case when redirecting channels on Windows.
The assertions in bytesAvailableInChannel were triggered whenever
an output process or output file was set and waitForBytesWritten
was called.
Task-number: QTBUG-45548
Change-Id: I225dfea2c5e27e122f75008a3a06d425554e00fe
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Drop process output to nullDevice(), if an application does not request
forwarding, redirecting or reading from the device channel. This
prevents from accumulation of unnecessary data which can not be read.
Change-Id: Ia311a8c658a46cf580ffa9484c5369f3fc5f98a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The generated xml file is now lowercase.
This was changed in shared-mime-info 3805d0bcf2.
It led to runtime warnings "No file found for ...", which helped notice the bug.
Change-Id: I31f0fc7f0fe8a098c3f79c0bcbeeb1909d2cc05a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The buffer may have been left dirty if we were unable to write all the
data to the child process in the previous run. So ensure we clear it
before starting a new one. We already did that for stdout and stderr,
for some reason.
Task-number: QTBUG-44517
Change-Id: I1a800c709d3543699131ffff13c419da3bbffacf
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This complements QHostAddress::isLoopback. The only missing check now is
for the "Any" address types, though operator== is quite fast nowadays.
Change-Id: Iee8cbc07c4434ce9b560ffff13cc2691e15014b6
Reviewed-by: Richard J. Moore <rich@kde.org>
Instead, we use the binary MySQL encoding and copy the data directly
into the QVariant of the desired type. This gets rid of the temporary
string allocations and greatly improves the performance of the added
benchmark. On my machine, the results are:
Before:
0.562 msecs per iteration (total: 563, iterations: 1000)
1,922,479.330 instructions per iteration (total: 1,922,479,330, iterations: 1000)
After:
0.381 msecs per iteration (total: 381, iterations: 1000)
774,132.957 instructions per iteration (total: 774,132,958, iterations: 1000)
Note that the same could be applied to floating point data types in
the future. Additionally, special support for MYSQL_TIME structure
coult be added to get rid of the string conversions there.
To ensure everything keeps working, a new auto test is added as well
that verifies the select statements and insertions of integral data
into a MySql table works as intended.
[ChangeLog][QtSql] Improve performance when reading integer values
from MySQL databases via prepared statements.
Change-Id: I21dd9277661971ded934546f09535014b63f8eb8
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It failed on Windows due to readonly files copied from the resource,
until adding a setPermission call.
Change-Id: I1d42b53763583aca73d011e0f2bbf061ef6aa891
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
In C++, type punning with a union is not allowed. It will result in
compiler defined behavior at best, and undefined behavior at worst.
Specifically, if QRgba64 is passed to a function by value, the different
members of a struct might be passed in separate registers. This means
that any write to the quint64 might not blank out the values of the
struct whenever the compiler looses track with TBAA.
Change-Id: I991b5492fe4bb13a14bb670fef5bf13dacbe6c0a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Just like from RGB32 to RGB30 we must also repremultiply when converting
from RGB64 because the alpha channel loses more precision than the other
color channels.
Since this is not approximated accurately in the simple blending
functions and the functions are no longer needed now the main render
engine supports higher accuracy, the simple blending routines for RGB30
have been removed.
Change-Id: I2b7b8eb015e330a487848fc4370ad3a1e966be91
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Have an autotest to prevent introducing JSON syntax errors
that become apparent only at runtime.
Change-Id: If2bcbf4d227fddcbeb9c095b7986bada078131d7
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
On Windows and OS X, where QStandardPaths does not use XDG_DATA_DIRS/
_HOME and shared-mime-info is not installed, the tests that require
additional shared mime info xml files were never run.
Mend that by using QStandardPaths' test mode instead of setting
XDG_DATA_HOME.
Change-Id: I53b75c293c41c4dac63986dcb88972c2b54d5428
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
The test is very flakey in 5.5 integrations and the OS X CI machines have
notorious problems with networking stability. So the previously listed tests
are not really at fault, it's an infrastructure problem, that we choose to
ignore for the time being.
Change-Id: I7fbfa7b3778daa6b5e60d95b822847c92927122f
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
SecureTransport does not implement QSslCertificatePrivate thus some
tests relying on generic version fail. Skip them for now.
Change-Id: I483340b37786a8a556e954b2c538e4f48a342be9
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
The former didn't account for ascent and descent.
Change-Id: If741f22f7e79ac3c13e58f2966358010d9f9ec81
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
[ChangeLog][Important Behavior Changes] QDebug output for QStrings
changed compared to Qt 5.5.0 to more closely match the output of
previous Qt versions. Like Qt 5.5.0, QDebug will escape non-printable
characters, the backslash and quote characters, but will no longer
escape the printable characters.
Task-number: QTBUG-47316
Change-Id: I52dd43c12685407bb9a6ffff13f62ef68cbc80c5
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Otherwise, on some systems (Windows), we'll always create the same dirs.
Change-Id: Id3d5c7bf4d4c45069621ffff13f79ba91e0f974b
Reviewed-by: Christopher Adams <chris.adams@jollamobile.com>
A couple of test always fail on OS X/iOS with SecureTransport
(simply not implemented yet).
Change-Id: Idd82262512938c36b657b497751738fdc804c182
Reviewed-by: Jeremy Lainé <jeremy.laine@m4x.org>
Reviewed-by: Richard J. Moore <rich@kde.org>
[ChangeLog][QtCore][QLoggingCategory] Fixed behavior of default
severity passed to constructor or Q_LOGGING_CATEGORY with regards to
QtInfoMsg, which was previously treated as being more severe than
QtFatalMsg.
This is because the code was using the numeric value of QtMsgType as a
proxy for severity (via the <= operator), but the value of QtInfoMsg is
greater than QtFatalMsg. Instead, the severity ordering must be dealt
with explicitly.
Change-Id: I5f178afc735221b00cb67c2cea4fa964bd9079ce
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Also removed the XFAIL from connectToUnresponsiveHost
Change-Id: Ie0f5685a8fa437c00d22f9e76b51ac61347ce03b
Task-number: QTBUG-15111
Reviewed-by: Caroline Chao <caroline.chao@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Ie29640451dddeb58342038a8cd5fac152cce39e5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Build it only in -developer-build mode for tests that might depend
on exact-matching font behavior.
Return earlier to avoid doing any useless job.
Change-Id: I966ee5689f03403e45f4c957b63e3113f0467803
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I624deb320c378c18a29b3707f48583d53bfd5186
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Icaa1edafcc6e2779fbd6dbc2c058544d6e07f1e9
Reviewed-by: Richard J. Moore <rich@kde.org>
The QSslCertificate tests only covered certificates with RSA keys, this
extends the test coverage to DSA and EC keys.
Change-Id: Ibee26f449cf6c1d97cbac6b511972eb44d6f0bd2
Reviewed-by: Richard J. Moore <rich@kde.org>
All overloads of QProcess::start will now check whether the program
string is empty and in that case
- set error to FailedToStart,
- set errorString to "No program defined",
- emit error.
Until now only one of the three overloads behaved like this.
As a side effect, start(QString(), QStringList()) will not crash on
Windows anymore.
Task-number: QTBUG-47404
Change-Id: I2f93657204fe3643b1d74a74817843c05fc4a96b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I4e4a319c5918d697a33f6d6032c36b8c9660ca05
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Introduce overloads in the API to allow specifying multiple color
attachment sizes and formats. When these are in use and MRT is supported,
a texture or renderbuffer is created for each of GL_COLOR_ATTACHMENT0, 1, 2, ...
[ChangeLog] Added support for multiple render targets in QOpenGLFramebufferObject
Task-number: QTBUG-39235
Change-Id: Ie7cfd81d1b796a9166b80dff7513aafe0120d53d
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
According to history, the test was supposed to verify
the correct parsing of the command line on Windows by the qWinCmdLine()
function in corelib. It did not test anything since the test
application printed out argv[1] instead of
QCoreApplication::arguments()[1]. Since qWinCmdLine() has been replaced
by the WinAPI CommandLineToArgvW(), the test no longer makes sense
and also starts to fail then warnings are printed to the error output.
Change-Id: Idf642783ebb56eaa8fba9004174557485563a84f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
So we can have interoperability with algorithms.
Motivated by inefficient code like qDeleteAll(hash.keys())
[ChangeLog][QtCore][QHash] Added key iterators, accessible through
keyBegin() and keyEnd().
Change-Id: I1f9db8a7a4294e1556cbb50b8fe5ebdcf0dc29a2
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
So we can have interoperability with algorithms.
Motivated by inefficient code like qDeleteAll(map.keys())
[ChangeLog][QtCore][QMap] Added key iterators, accessible through
keyBegin() and keyEnd().
Change-Id: Ieee2f9ad031e9d1e845a71447746699bbe95b96c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The comment about non-OpenSSL backends not reproting a specific error
for self-signed certificates contained a typo, this fixes it.
Change-Id: I3010981d5d87d68ebf5e984c003b8bbbfb019b96
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Non-OpenSSL backends are not able to report a specific error code
for self-signed certificates.
Change-Id: I56bf130335b2afa65cf2bd5248a40ac0e32f74c2
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Rename the test slot eventFilter() to testEventFilter(), which fixes:
tst_qgraphicsproxywidget.cpp:101:10: warning: 'tst_QGraphicsProxyWidget::eventFilter' hides overloaded virtual function [-Woverloaded-virtual]
void eventFilter();.
Change-Id: Ia05d188b18dcbf3a0b093dcea19a7122bcde6e62
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
tst_qgraphicsanchorlayout.cpp:144:5: warning: ignoring return value of function declared with warn_unused_result attribute [-Wunused-result]
layoutGeometry.adjusted(+right, +top, -left, -bottom);
Change-Id: I411ccaa867e418f36869fc244ea2eeaa5b117312
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Fix warnings:
tst_qtcpsocket.cpp:245:9: warning: private field 'numConnections' is not used [-Wunused-private-field]
int numConnections;
^
tst_qtcpsocket.cpp:1834:9: warning: private field 'exitCode' is not used [-Wunused-private-field]
int exitCode;
tst_qcheckbox.cpp:86:10: warning: private field 'tmp' is not used [-Wunused-private-field]
uint tmp;
^
tst_qcheckbox.cpp:88:10: warning: private field 'tmp2' is not used [-Wunused-private-field]
uint tmp2;
Below warning is caused by code #ifdefed for OS X only, make it a local variable:
tst_qlabel.cpp:114:16: warning: private field 'test_edit' is not used [-Wunused-private-field]
QLineEdit *test_edit;
Change-Id: I53c755545fe2e7ca1f053f40c8c0e50aec2efcdd
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
in tests/auto/other, tests/auto/printsupport and tests/auto/xml.
Change-Id: I28cbdc89d36791f179425f17f90b697c60660938
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Preparing the replacement of Q[TRY]_VERIFY(a == b) by
Q[TRY]_COMPARE(a, b) for non-boolean types.
Change-Id: Iab6ec2f0a89a3adc79e18304573994965013dab5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I7add5b7afeba83895acdcbed110e8275dc76864a
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
The history state had the limitation that it was hard (or impossible) to
use when more than one default state had to be entered. For example,
using it in a parallel state was impossible without ending up in an
infinite loop.
This patch changes the QHistoryState to only have an initial transition,
and the state selection algorithm is changed accordingly. It also brings
QStateMachine closer to the SCXML standard.
The existing defaultState is implemented on top of the
defaultTransition: when used, a new transition, with the default state as
its target, is set as the defaultTransition.
Task-number: QTBUG-46703
Change-Id: Ifbb44e4f0f26b72e365af4c94753e4483f9850e7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
A parallel state cannot have an initial state, as all children of the
parallel state will be entered. Setting such an initial state on a
QState marked as ParallelStates would already produce a warning and
ignore the initial state. Now any initial state that has been set before
changing the child-mode to ParallelStates will also produce a warning
and remove the previously set initial state.
Change-Id: Ie5fcd44b03516744f785f2d1880bf806918c44d4
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Add QTRY_VERIFY2_WITH_TIMEOUT() similar to QTRY_VERIFY_WITH_TIMEOUT()
except that QTRY_VERIFY2() is used below the loop and QTRY_VERIFY2()
based on it.
Add tests to cmptest.
[ChangeLog][QtTest] Added macros QTRY_VERIFY2_WITH_TIMEOUT(), QTRY_VERIFY2()
making it possible to output a message after the timeout has expired.
Change-Id: I587e24f3aeb73542dbf3ccb936a16f2e0806555f
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Set QFileDevice::WriteUser on all files extracted from resources. These
are read-only, which is preserved by QFile::copy(). This caused the
deletion of the temporary directory to fail on Windows.
Change-Id: Id99de9160471c38bcec68025c89cfabbe209bdbe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][QtCore][QProcess] Fixed a bug that caused QProcess to launch
a child process on Unix even if the directory specified with
setWorkingDirectory did not exist.
Task-number: QTBUG-47271
Change-Id: Ib306f8f647014b399b87ffff13f195158b0e52f5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We force a recreation of the library paths with added information on
construction of QCoreApplication. This way we can find plugins in
the application directory which only becomes known when
QCoreApplication is created. When the user changes the library path
we create a new list of the manually modified library paths and
recalculate it from the delta of original vs. modified paths when
QCoreApplication is created.
The upsides of this approach vs. keeping an explicit delta are:
* We don't need to introduce a separate data structure to hold
the added/removed status for delta items or the information that
the whole list got replaced.
* The lists never get larger than the the real library paths. An
explicit delta would have to record all modifications.
* I don't think the delta replay algorithm we would have to do
anyway could be made much more compact than the one this change
introduces.
Of course, if the user actually changes anything, the list is
duplicated. Considering that this is a rarely used function and
that we would have to save some extra information anyway, I think
we can live with this.
Task-number: QTBUG-38598
Change-Id: I3bfbbd1be62dd5804dcc7ac808b053428a4e3149
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds an OpenSSL-based implementation of the QSslKeyPrivate encrypt
and decrypt method. This puts both the OpenSSL-based and non-OpenSSL
backends (WinRT for now) on par.
Change-Id: I18a75ee5f1c223601e51ebf0933f4430e7c5c29b
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
This is low-hanging fruit, for two reasons:
1. The implementation is dead-simple (unlike, say, in QList).
2. It's completely transparent to the QVector user (unlike,
say, emplace_back, which can only be used inside an ifdef).
Change-Id: Iaf750100cf61ced77aa452f0e4e3c4ec36b29639
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
