In Qt Quick, when we deliver an item-specific QTouchEvent that contains
only the subset of eventpoints that are inside the Item's bounds,
traditionally the Item can accept the event to tell the delivery logic
that the event is handled and doesn't need to be delivered further.
But an Item cannot be expected to have total scene awareness; so now,
the delivery is "done" only when all eventpoints in the original event
are accepted. This behavior has been working well enough already due to
logic in QQuickWindow that iterates the points and accepts them if the
event is accepted; but it seems appropriate to move this enforcement
into QPointerEvent itself. Making setAccepted() virtual gives us a
useful degree of freedom.
Event-handling code should alternatively use QEventPoint:setAccepted()
or QPointerEvent::setExclusiveGrabber() to take resonsibility for only
a subset of the touchpoints.
Another way to put it is that we treat QPointerEvent::setAccepted() as a
convenience method: accepting the QEventPoints is what counts (at least
in Qt Quick).
Change-Id: Icec42dc980f407bb5116f5c0852c051a4521105a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Leave the normalizedPos warnings, there is no equivalent function.
Change-Id: I50c72ab24b4855e36941aafdee30cdb0e94c1684
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Expose event would not be sent when window was resized
Fixes: QTBUG-69155
Pick-to: 5.15
Change-Id: I81bf2d54f830a0dabf15398e1f25b55ff7ff4479
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Failure to copy m_inputEvent and m_pointerEvent actually left them
uninitialized, and resulted in random behavior in Qt Quick when
Flickable clones a pointer event for later replay.
Remove the comment about copying events being a "bad idea" in Qt 4,
while we're at it. Copying became more common in Qt 5, and we
probably won't be able to stop doing it now.
Change-Id: I40b6ba5ad696e7aaafbeefbca86eca00cab40616
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move the factor() test, drop scale() which should be
covered already.
Change-Id: Id2079536a91c7e9f7199960bdf6b33489d0a6670
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Use the new screen config feature of the offscreen
platform plugin to run tests on virtual screen setup.
This has the benefit that we can auto-test the QHighDpiScaling
implementation (as well as its usage in QtGui) on any platform
with a fixed mock screen setup which does not rely on physical
screen configuration.
Test the following configurations:
- three screens: 96 DPI. (reference)
- three screens: 192 DPI
- three screens: mixed (high) DPI
Change-Id: I2fac889d896cf30ab2a79c306cee22177ad8f4ac
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The return value can be ignored here, so make intention clear.
Change-Id: I116869c47039b159db96f133b5850a2215873c2f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Tests the move semantics of QImage in Qt6.
Change-Id: Ia4d95f0b88ca7dde0daf85a0f53049b42b5be1a5
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
If the difference between the families sizes is just 1 where one of them
is 0 in size then we can fallback to the family in that case.
Pick-to: 5.15
Fixes: QTBUG-87267
Change-Id: I62b25b06c88000b4d7defe91871c07873b1fc792
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The original restriction to UniformBuffer was due to the GL backend
where there is no GL buffer object for QRhiBuffers with usage
UniformBuffer. However, we can still implement this for cases when
there is a true GL buffer object underneath. With other backends it
should all work as-is already.
This becomes useful when one has buffers with usage Vertex that need
full updates every frame. (f.ex. instance data)
Unfortunately this involves renaming the function. But while at it, add
an autotest case as well.
Change-Id: Iff59e4509a8bae06654cc92fe8428bd79eb012fb
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We were already using the 'native' nomenclature when referring to these
kinds of APIs, e.g. when talking about native handles, or the existing
QPlatformNativeInterface on a QPA level. Using 'native' for the user
facing APIs also distinguishes them from the 'platform' backend layer
in QPA and elsewhere.
Change-Id: I0f3273265904f0f19c0b6d62471f8820d3c3232e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
During delivery of a TouchBegin event, if no widget accepts it,
we begin treating the first touchpoint as a synth-mouse, as before.
If a second touchpoint is pressed or released in any order, it's
irrelevant: the fake mouse button is released as soon as the first
touchpoint is released. This fixes the bug that such a scenario
caused the mouse release not to be sent, so that a widget could get
"stuck" in pressed state.
Done-with: Tang Haixiang <tanghaixiang@uniontech.com>
Fixes: QTBUG-86253
Pick-to: 5.15
Change-Id: I7fbbe120539d8ded8ef5e7cf712a27bd69391e02
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reports on the Web have it that there's nothing guaranteeing a
driver does any actual freeing of resources then doing
vkFreeCommandBuffer for a command buffer from a command pool that
does not have VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT, thus
leading to continuously growing resource usage with our current
allocate/free pattern. It could be that this is the source of out
of memory problems we are seeing on some Android devices.
Instead of just going straight for said command pool flag and doing
ResetCommandBuffer for the command buffers individually, take one
step further and use per-slot (slot being 0 or 1 if QVK_FRAMES_IN_FLIGHT
is 2) command pools. The current pool is reset in each
beginFrame/beginOffscreenFrame, moving all allocated command buffers
to the initial state (while other command buffers with the other pool
are not affected).
This may be (while impossible to tell from just guessing based on the
spec) our best approach to command buffer allocation since a Vulkan
implementation can likely just use some simple per pool allocator,
knowing that we never want to free or reset individual command buffers,
but we rather only reset the whole pool at once.
The option of importing an existing VkCommandPool when creating the
QRhi instance is now gone, but there was probably no point in offering
that in the first place.
When it comes to VK_COMMAND_POOL_RESET_RELEASE_RESOURCES_BIT it will
not be set unless releaseCachedResources() (in Qt Quick this is hooked
into QQuickWindow::releaseResources()) was called. What this does in
practice is unknown, but have an option to set it now and then if the
application really wants.
While we are at it, rename secondaryCbs to activeSecondaryCbStack to
indicate what it really is. (it's a stack as each call to
beginExternal() pushes a new one, while each endExternal() pops)
Change-Id: I2e5c1fad26d794e1f56c778e38f750998d706d84
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
ExternalContentsInPass becomes a per-pass flag now. Why is this
beneficial? Because while Qt Quick has no choice for its render
pass, not being able to guess if the application wants to do some
native rendering in there, Quick 3D's render passes, all the ones
that are under Quick3D's control, do not have native rendering
from the application in them, and so using secondary command
buffers with Vulkan is not necessary.
Introduce something similar for compute and OpenGL. By knowing that
none of the resources used in a pass are used with a compute pass
(e.g. because we know that there are no compute passes at all) a small
amount of time can be saved by skipping tracking buffers and textures
because the only purpose of said tracking is to generate barriers that
are relevant only to compute.
Change-Id: I0eceb4774d87803c73a39db527f5707a9f4d75c1
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
It also demonstrated that the tests were out of sync with reality:
since a97759a336c597327cb82eebc9f45c793aec32c9 QMouseEvent::button()
and QWindowSystemInterfacePrivate::MouseEvent::button should be the
button that changes state of course; but when a button is pressed,
we are reacting to it after the fact, so QMouseEvent::buttons() and
QWindowSystemInterfacePrivate::MouseEvent::buttons should include the
new button that was just pressed. Likewise when a button was released,
we send the event with buttons _omitting_ the button that was just
released.
Amends 147a8bc4c8 and
6d6ed64d6c
Change-Id: I670289019fcfa7de685ca38799804772dc0f1c8f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This reverts commit b1ef104866.
This test is BPASS on openSUSE_42_3 for 5.12 and PASS on openSUSE_15_1
for 5.15.
Pick-to: 5.15
Pick-to: 5.12
Change-Id: Ia1d81ed38491c27c01f270623c5082663f4da699
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Change lots of code to avoid the deprecated operator+() or implicit
casts to int.
Change-Id: I0c343cd5b28603afdf1214eefb85e928313345e2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Do not always use the smoothScaled routine, the normal routines are
also optimized, and do not convert to alpha formats when not necessary.
Task-number: QTBUG-49719
Change-Id: I6ee9b620cc259472c419e7363357f41ce29b594a
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
It already has a move-assignment operator, and implements swapping.
This requires a specialization of the QExplicitlySharedDataPointer
destructor to be forward declared, and an implementation that is
identical to the default version. Otherwise we would need
QPlatformPixmap to be fully defined in the public QPixmap header.
Change-Id: I2651bbc29a7083a93e3b3ad671d3aeea659b7d5a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Colors with wrong number of elements are now invalid.
Change-Id: I32c934894de86095d9790baa5f0d2001d76bcd3c
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Clean up the state of the projects,
before changing the internal CMake API function names.
Task-number: QTBUG-86815
Change-Id: I90f1b21b8ae4439a4a293872c3bb728dab44a50d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
tst_qguiapplication was missing an Info.plist file.
We can't directly reference the tst_qcoreapplication Info.plist
file like the qmake project does, because that breaks ninja
(says multiple rules create the same output file), so use a
copy instead.
Blacklist the qpluginloader loadMachO test when doing CMake builds.
The qmake projects use multiple custom rules to build the macho
plugins, which need to be ported to CMake.
Task-number: QTBUG-86053
Task-number: QTBUG-86792
Change-Id: Iaff2b2d5e9e84a457b4f2ffc011a580388498f00
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Changes the definition of invalid QRects to be more consistent.
This simplifies the logic, and makes it possible for us to fix
normalized() so dimensions don't change.
The actual API is not changed except for inverted rects.
Only one use-case for the old normalized() function existed,
and has been reimplemented as QRect::span().
Fixes: QTBUG-22934
Change-Id: I29dad2952dc6c8e84a6d931898dc7e43d66780f3
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Do not use QVariant::Type anymore, instead use QMetaType
For some reason, this pushed the qvariant autotest over the limit where
MSVC requires the /bigobj flag, so add that one.
[ChangeLog][QtCore][QMimeData] The signature of the virtual retrieveData()
function has changed and now takes a QMetaType instead of a QVariant::Type.
Change-Id: Ib46773bd731ee2177b1ef74d8162d744be7017ef
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
These states correspond well with ScrollPhase, and this abstraction
makes it possible to handle wheel events the same way as mouse events
in Qt Quick: on "begin" we deliver to all Items and Handlers until
all points (the only point) are accepted; on "update" and "end" we
deliver only to the exclusive grabber, if there is one, and to any
passive grabbers.
Change-Id: I702dbd4f2c1bf5962eb3dbb9e4b725300a00a887
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It is lossy, so should be requested explicitly, using a dedicated
fromPixmap factory function.
Deprecate the constructor and assignment operator, and make the
constructor explicit.
[ChangeLog][QtGui][QBitmap] Implicitly constructing and assigning
to a QBitmap from a QPixmap has been deprecated, and the respective
constructor has been made explicit. Use the fromPixmap factory
function instead.
Change-Id: I68ce85b26c901415137b664a1db687021d48bae0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Adjust to changes to QIcon::pixmap, QMetaType::type, and
QAbstractItemView::itemDelegate.
Change-Id: I9eb0331ef899131afc86c33f27feeee76331ffc8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In 4e400369c0 we began to send synth-mouse
events from the touch device, but in the opposite direction it was not
consistent.
Add autotests to prove that it's consistent both ways now.
Change-Id: I7df2328fef224dc1529ca5d27411cd8a5a9c8df9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This functionality was only in Qt Quick in Qt 5. Now we move it up to QtGui
so that every QEventPoint will have a valid velocity() before being delivered
anywhere.
[ChangeLog][QtGui][QPointerEvent] Every QEventPoint should now carry a valid
velocity(): if the operating system doesn't provide it, Qt will calculate it,
using a simple Kalman filter to provide a weighted average over time.
Fixes: QTBUG-33891
Change-Id: I40352f717f0ad6edd87cf71ef55e955a591eeea1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QQuickEventPoint instances were very long-lived and got reused from one
event to the next. That was initially done because they were "heavy"
QObjects; but it also became useful to store state in them between
events. But this is in conflict with the ubiquitous event replay
code that assumes it's OK to hold an event instance (especially
a QMouseEvent) for any length of time, and then send it to some widget,
item or window. Clearly QEventPoints must be stored in the QPointerEvent,
if we are to avoid the need for workarounds to keep such old code working.
And now they have d-pointers, so copying is cheap. But replay code
will need to detach() their QEventPoints now.
QEventPoint is useful as an object to hold state, but we now store
the truly persistent state separately in an EventPointData struct,
in QPointingDevicePrivate::activePoints. Incoming events merely
update the persistent points, then we deliver those instead.
Thus when event handler code modifies state, it will be remembered
even when the delivery is done and the QPA event is destroyed.
This gets us a step closer to supporting multiple simultaneous mice.
Within pointer events, the points are moved up to QPointerEvent itself:
QList<QEventPoint> m_points;
This means pointCount(), point(int i) and points() can be non-virtual.
However in any QSinglePointEvent, the list only contains one point.
We hope that pessimization is worthwhile for the sake of removing
virtual functions, simplifying code in event classes themselves, and
enabling the use of the range-for loop over points() with any kind of
QPointerEvent, not just QTouchEvent. points() is a nicer API for the
sake of range-for looping; but point() is more suited to being
non-const.
In QML it's expected to be OK to emit a signal with a QPointerEvent
by value: that will involve copying the event. But QEventPoint
instances are explicitly shared, so calling setAccepted() modifies
the instance in activePoints (EventPointData.eventPoint.d->accept);
and the grabbers are stored separately and thus preserved between events.
In code such as MouseArea { onPressed: mouse.accepted = false }
we can either continue to emit the QQuickMouseEvent wrapper
or perhaps QEvent::setAccepted() could become virtual and set
the eventpoint's accepted flag instead, so that it will survive
after the event copy that QML sees is discarded.
The grabChanged() signal is useful to keep QQuickWindow informed
when items or handlers change exclusive or passive grabbers.
When a release happens at a different location than the last move event,
Qt synthesizes an additional move. But it would be "boring" if
QEventPoint::lastXPosition() accessors in any released eventpoint always
returned the same as the current QEventPoint::xPosition()s just because
of that; and it would mean that the velocity() must always be zero on
release, which would make it hard to use the final velocity to drive an
animation. So now we expect the lastPositions to be different than
current positions in a released eventpoint.
De-inline some functions whose implementations might be subject to
change later on. Improve documentation.
Since we have an accessor for pressTimestamp(), we might as well add one for
timestamp() too. That way users get enough information to calculate
instantaneous velocity, since the plan is for velocity() to be somewhat
smoothed.
Change-Id: I2733d847139a1b1bea33c00275459dcd2a145ffc
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The qfilesystemmodel.pro was recently moved to the gui tests subfolder,
but it uses widgets inside. Skip it in a no-widgets build.
Amends fb9ec8ad44
Task-number: QTBUG-86187
Change-Id: I955556ffddad483d4c25602ae126b8c2433091b2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
As per ### Qt6 comment. Also rename the LibraryLocation enum
to LibraryPath.
Change-Id: I556025a19c5bcdf2ff52598eaba32269522d4128
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There is no reason to use double precision for colors. We at most have
16 significant bits anyway.
Change-Id: I8b402cd978675b8ba7248176976d934363212ff1
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Gives it its own changed signal, and simplifies setting from group,
while fixing an inconsistency in propagation.
Change-Id: I22b243210260a8878144fa4b60204df46f847f37
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
I still have doubts that QEventPoint can't be made small enough that
copying would be cheaper than reference-counting and all the indirections
in now-noninline accessors, but this gives us the usual freedom to
change the data members later on.
Change-Id: I792f7fc85ac3a9538589da9d7618b647edf0e70c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Because we removed public setters from QTouchEvent and QEventPoint in
4e400369c0 and now it's proposed to give
QEventPoint a d-pointer again, the implementation of QTouchEventSequence
needs to start using QMutableEventPoint: being a friend will no longer
be enough, because the member variables won't be accessible in the future.
But because we have separate test libs for Gui and Widgets, it needs to
be further refactored into two classes.
Change-Id: I0bfc0978fc4187348ac872e1330d95259d557b69
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Following the introduction of QKeyCombination, reduce the number
of warnings raised by the test. Drive-by, remove some pointless
math like Qt::SHIFT+0, which does not make any sense and would
actually fail to compile (shortly).
Refactoring the test to fully use QKeyCombination (instead of
ints) is left as a future exercise; some QKeyCombination->int
warnings are still around.
Change-Id: If825bc4c369986623447927bb11493c4f58b544f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Adjusting the QPrinter test case - some use cases no longer exist, or are
already tested in QPageSize and QPageLayout tests.
Adjust examples and manual tests.
Change-Id: I01cbc65f3d8031aea2dac86dd942126ba708b111
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
C++20 via P1120 is deprecating arithmetic operations between
unrelated enumeration types, and GCC 10 is already complaining.
Hence, these operations might become illegal in C++23 or C++26 at
the latest.
A case of this that affects Qt is in key combinations: a
QKeySequence can be constructed by summing / ORing modifiers and a
key, for instance:
Qt::CTRL + Qt::Key_A
Qt::SHIFT | Qt::CTRL | Qt::Key_G (recommended, see below)
The problem is that the modifiers and the key belong to different
enumerations (and there's 2 enumerations for the modifier, and one
for the key).
To solve this: add a dedicated class to represent a combination of
keys, and operators between those enumerations to build instances
of this class.
I would've simply defined operator|, but again docs and pre-existing
code use operator+ as well, so added both to at least tackle simple
cases (modifier + key).
Multiple modifiers create a problem: operator+ between them yields
int, not the corresponding flags type (because operator+ is not
overloaded for this use case):
Qt::CTRL + Qt::SHIFT + Qt::Key_A
\__________________/ /
int /
\______________/
int
Not only this loses track of the datatypes involved, but it would
also then "add" the key (with NO warnings, now its int + enum, so
it's not mixing enums!) and yielding int again.
I don't want to special-case this; the point of the class is
that int is the wrong datatype. Everything works just fine when
using operator| instead:
Qt::CTRL | Qt::SHIFT | Qt::Key_A
\__________________/ /
Qt::Modifiers /
\______________/
QKeyCombination
So I'm defining operator+ so that the simple cases still work,
but also deprecating it.
Port some code around Qt to the new class. In certain cases,
it's a huge win for clarity. In some others, I've just added
the necessary casts to make it still compile without warnings,
without attempting refactorings.
[ChangeLog][QtCore][QKeyCombination] New class to represent
a combination of a key and zero or more modifiers, to be used
when defining shortcuts or similar.
[ChangeLog][Potentially Source-Incompatible Changes] A keyboard
modifier (such as Qt::CTRL, Qt::AltModifier, etc.) should be
combined with a key (such as Qt::Key_A, Qt::Key_F1, etc.) by using
operator|, not operator+. The result is now an object of type
QKeyCombination, that stores the key and the modifiers.
Change-Id: I657a3a328232f059023fff69c5031ee31cc91dd6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Port the high-dpi icon test to use the new pixmap()
API which takes the target devicePixelRatio as an argument.
This means we can run the fromTheme test at dpr = {1,2,3},
instead of at the current global devicePixelRatio only.
Task-number: QTBUG-85885
Change-Id: Iec7b21e04ed760e48964307d2048eaec1976ffe2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Without an override for logicalDpi() the base class implementation
would use the geometry of the screen to figure out the DPI, and end
up with ~100, which combined with a 96DPI base logical DPI would
give a wrong scale factor.
Change-Id: I68aecce44d2ee672c7b707dfe5444af8f551e961
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Add new QIcon::pixmap() overload:
QPixmap pixmap(const QSize &size, qreal devicePixelRatio, ...)
This function replaces the existing pixmap() function which
take a QWindow pointer, and should be more convenient in use.
Task-number: QTBUG-85885
Change-Id: Ie4ca96a266d9278864678dc61bdfc2836cabdb93
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The explicit paint event on QtGui and QPA level allows us to untangle
the expose event, which today has at least 3 different meanings.
It also allows us to follow the platform more closely in its semantics
of when painting can happen. On some platforms a paint can come in
before a window is exposed, e.g. to prepare the first frame. On others
a paint can come in after a window has been de-exposed, to save a
snapshot of the window for use in an application switcher or similar.
The expose keeps its semantics of being a barrier signaling that the
application can now render at will, for example in a threaded render
loop.
There are two compatibility code paths in this patch:
1. For platform plugins that do not yet report the PaintEvents
capability, QtGui will synthesize paint events on the platform's
behalf, based on the existing expose events coming from the platform.
2. For applications that do not yet implement paintEvent, QtGui will
send expose events instead, ensuring the same behavior as before.
For now none of the platform plugins deliver paint events natively,
so the first compatibility code path is always active.
Task-numnber: QTBUG-82676
Change-Id: I0fbe0d4cf451d6a1f07f5eab8d376a6c8a53ce8c
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Remove QTypeInfo::isStatic, as that's not used anymore in Qt 6.
Also remove sizeOf, it's unused, and we have QMetaType for that if
required.
Remove all typeinfo declaractions for trivial types, as the default
template covers them correctly nowadays.
Finally set up a better default for isPointer, and do some smaller
cleanups all over the place.
Change-Id: I6758ed37dfc701feaaf0ff105cc95e32da9f9c33
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Having three methods with the same name doing different things is
unnecessarily confusing, so follow the standard naming convention in
Qt and call the getter of the resolve mask resolveMask, and the setter
setResolveMask. These methods were all documented as internal.
The publicly documented resolve() method that merges two fonts and
palettes based on the respective masks remains as it is, even though
'merge' would perhaps be a better name.
Change-Id: If90b1ad800834baccd1dbc38fc6b861540d6df6e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This makes high-level event dispatching easier: for example in Qt Quick,
all pointer events should eventually be delivered to items in a similar way.
Implemented in a similar way as d1111632e2.
Change-Id: I2f0c4914bab228162f3b932dda8a88051ec2a4d7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This requires a QAbstractFileIconProvider in QtGui, as the standard
QFileIconProvider depends on QStyle, and cannot be moved out of
QtWidgets.
QAbstractFileIconProvider returns strings for file types, but returns
no icons yet. Support for a default icon set might be added in a
follow-up commit.
Change-Id: Ib9d095cd612fdcf04db62f2e40709fcffe3dc2b7
Fixes: QTBUG-66177
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
event()->device() was the most common use case anyway.
The idea that the "parent" of a QEventPoint is the QPointerEvent
interferes with the ability to copy and move event objects: the parent
pointers are dangling unless we use the QPointerEvent subclass
destructors to set the points' parents to null. Since there is no move
constructor, even returning a QEventPoint from a function by value
results in destroying the temporary instance and copying it to the
caller's space. So the parent pointer is often useless, unless we do
even more work to maintain it when the event moves.
If we optimize to avoid copying QEventPoints too much (and perhaps
enable exposing _mutable_ points to QML) by storing reusable instances in
QPointingDevice (which is the current plan), then the actual parent will
no longer be the event. Events are usually stack-allocated, thus
temporary and intended to be movable.
Change-Id: I24b648dcc046fc79d2401c781f1fda6cb00f47b0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
And remove one of the type id to name mapping that still
existed in QMetaType. QMetaTypeInterface can provide that,
so there's no need to have a second copy of the data.
qMetaTypeTypeInternal() can still map all the names of all
builtin types to ids. That functionality is for now still
required by moc and can't be removed yet.
Change-Id: Ib4f8e9c71e1e7d99d52da9e44477c9a1f1805e57
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
And remove the old manual registration code for those operators.
Add some special handling for long/ulong, as these types could be
streamed as a QVariant so far, but are not directly streamable
through QDataStream.
[ChangeLog][QtCore][QMetaType] The QMetaType::registerStreamOperators()
and QMetaType::registerDebugStreamOperator() methods have been
removed. The streaming operators for a type are now automatically
registered together with the type registration. This implies that the
operators should be visible wherever the type is visible and being used.
[ChangeLog][Behavior Incompatible Changes] Because the QDataStream and
QDebug serialization operators are automatically registered with
QMetaType, the declarations of those functions must be present at any
point where the type is used with QMetaType and QVariant.
Change-Id: I4a0732651b20319af4a8397ff90b848ca4580d99
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This extends to/fromString to include style strategy, capitalization,
letter and word spacing and stretch. QFont::fromString() keeps
compatibility with strings from earlier versions as well.
Fixes: QTBUG-67687
Change-Id: I5e95a58f1cd850214af2a7d8906a214facd4e661
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
MidButton had its // ### Qt 5: remove me
upgraded to Qt 6 at 5.0; but it dates back to 4.7.0
Replace the many remaining uses of MidButton with MiddleButton in the
process.
Pick-to: 5.15
Change-Id: Idc1b1b1816673dfdb344d703d101febc823a76ff
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It is a valid use case to have a vertex shader with no
vertex attributes. Using gl_VertexID or gl_InstanceID
is enough to generate vertex data out of thin air.
Change-Id: If7689914624a84723923fd2d7aef355bda592e24
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
It was marked internal anyway. Use the constructor taking a
QMetaType instead.
Change-Id: I15b9cd0911aac063a0f0fe0352fa2c84b7f7c691
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Both normal and relaxed constexpr are required by our new minimum of
C++17.
Change-Id: Ic028b88a2e7a6cb7d5925f3133b9d54859a81744
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
isNull() would forward to the contained type and check that type's
isNull() method for some of the builtin types. Remove that behavior
and only return true in isNull(), if the variant is invalid, doesn't
contain data or contains a null pointer.
In addition, implement more consistent behavior when constructing
a QVariant using the internal API taking a copy from a void *.
isNull() should return true in both cases. This mainly changes behavior
for some corner cases and when using our internal API.
[ChangeLog][Important Behavior Changes] QVariant::isNull()
no longer returns true when the variant contains an object of some
type with an isNull() method, that returns true for the object;
QVariant::isNull() now only returns true when the variant contains
no object or a null pointer.
Change-Id: I3125041c4f8f8618a04aa375aa0a56b19c02dcf5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Remove the compare method in the QVariant::Handler struct. Rely
on the generic support provided by QMetaType instead.
[ChangeLog][Important Behavior Changes][QVariant] QVariant will now use builtin support in
QMetaType to compare its content. This implies a behavioral change
for some graphical types like QPixmap, QImage and QIcon that will
never compare equal in Qt 6 (as they do not have a comparison
operator).
Change-Id: I30a6e7116c89124d11ed9052537cecc23f78116e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We only support version 4 and 5 in Qt 6.0. 1 and 2 are already gone
(due to being based on binary JSON), now we remove 3 as well.
Task-number: QTBUG-81346
Change-Id: I3627dcc0587f1e36f11e93edf7172889e911d64e
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Employ RO0; inherit the constructors from the base class; and
do some code tidies as a drive by.
The inherited constructors bring in goodies like initializer_list
support.
Change-Id: Ia00a3f9b0ccbf182bf837bc65ba2305110c8dc60
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
mkspecs/features/qt.prf adds a dependency on the system threading
library if the Qt Core thread feature is enabled. Because qt.prf is
loaded by any public or internal Qt project, it's essentially a public
dependency for any Qt consumer.
To mimic that in CMake, we check if the thread feature is enabled, and
and set the Threads::Threads library as a dependency of Qt6::Platform,
which is a public target used by all Qt modules and plugins and Qt
consumers.
We also need to create a Qt6Dependencies.cmake file so we
find_package(Threads) every time find_package(Qt6) is called.
For the .prl files to be usable, we have to filter out some
CMake implementation specific directory separator tokens
'CMAKE_DIRECTORY_ID_SEP' aka '::@', which are added because we call
target_link_libraries() with a target created in a different scope
(I think).
As a result of this change, we shouldn't have to hardcode
Threads::Threads in other projects, because it's now a global public
dependency.
Task-number: QTBUG-85801
Task-number: QTBUG-85877
Change-Id: Ib5d662c43b28e63f7da49d3bd77d0ad751220b31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
QFontDatabase is a singleton and all instances would share
a single, mutex-protected global data pointer. But some functions
were implemented as non-static functions. This caused a lot
of code on the form
QFontDatabase().families(...)
since there was no static access. Other functions were implemented
as static.
To consolidate, we make all functions static. This should be
source-compatible, but not binary compatible.
[ChangeLog][QtGui][Fonts] Some functions in QFontDatabase were in
principle static, but previously not implemented as such. All
member functions have now been made static, so that constructing
objects of QFontDatabase is no longer necessary to access certain
functionality.
Fixes: QTBUG-83284
Change-Id: Ifd8c15016281c71f631b53387402c942cd9c43f6
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
QQuickPointerEvent had them, so despite how trivial they look,
it's very convenient to keep using them in QQuickWindow rather than
duplicating these kinds of checks in various places, and for multiple
event types too.
Change-Id: I32ad8110fd2361e69de50a679ddbdb2a2db7ecee
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
After enabling Qt::AA_UseHighDpiPixmaps, QIcon::pixmap()
now returns pixmaps larger than the requested size on
devicePixelRatio > 1 screens.
Adapt tests to account for this changed behavior.
Skip tests where it’s unclear what the the expected
behavior is, or where the test logic does not apply
to dpr > 1.
This gives a clearer indication of where we are
(39 passed, 0 failed, 9 skipped), and enables using
the qicon test to catch regressions also when running
at dpr > 1.
Remove the "lowdpi" testcase flags from the qmake and
cmake project files.
Change-Id: Ia7ce722ae356fc496a91b54e9f5d590d13b9df62
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Only keep 3, 4, and 5 because 3 is the lowest version where binary JSON
is not used anymore.
Change-Id: Id0319e8eceb845017ed493d0ef6902b53050d5a6
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Some compilers implicitly captures, and will warn about the unused capture.
Change-Id: Ib5e1cc3956c7eb0dc87cee834cce8a2b3dd0d30b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The previous implementation multiplexed callback-based event
notification into a single proxy event (cf. 85403d0af), which was
in turn object-waited for (this was the case since the beginning
of public qt history). It makes more sense to multiplex into a
posted message, because that also works with foreign event loops
that do not know anything about our event objects.
Task-number: QTBUG-64443
Change-Id: I97945ac8b5d7c8582701077134c0aef4f3b5a18f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Not sure why this was disabled in the first place.
Change-Id: I66329b55fd46d03fd96818c6c7004718ddea5c79
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Move QWindowsMime (which was a public class in Qt 4 and moved to the QPA
plugin in Qt 5) to the platform namespace and add register functions to the
native application.
Move in test code from QtWinExtras.
Task-number: QTBUG-83252
Change-Id: Iaac440e2d5cb370110919921b1eeb779600b5b65
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add conversions from/to HBITMAP, HICON to QImage. Split the pixmap
conversion functions apart to use them.
Task-number: QTBUG-81876
Change-Id: Ic0c41a402a1f6e9bec572fc4d691357bd48e6423
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
As of 951d490750, high-DPI support
for pixmaps is enabled by default, which makes this test fail
when running on a local system with a high-DPI display.
Change-Id: I3fe4674d19a57bf82aa32b01d470c714092f7e62
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Avoid parsing over the buffer limit, or interpreting non-hex
as hex.
This still leaves parsing of lines longer than 300 chars
unreliable
Change-Id: I1c57a7e530c4380f6f9040b2ec729ccd7dc7a5fb
Pick-to: 5.15 5.12
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
It is unnecessary to create a QList container just for comparison.
Split out helpers for comparing sequence sizes and sequences from
qCompare(QList) and add a template for an array with a non-type template
parameter for the size.
One can then write something like:
const int expected[] = {10, 12,...};
QCOMPARE(QFontDatabase.pointSizes(...), expected)
Unfortunately, any commas in such an array will be misread by macro expansion
as macro argument separators, so any expected array with more than one entry
needs an extra macro expanding __VA_ARGS__.
Change-Id: Ie7c8dc20bf669bbb25f6d7f8562455f8d03968c8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Expand the getSetCheck to include all properties, and add a test to
verify the fallback logic for the tooltip property.
Use the meta object system to set and check properties in the
tooltip-test to verify that things don't break when migrating to
the new property system.
Change-Id: I56355e8b436ede46701a124a9241ed26d2c706c5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Change the functions to operate in float and add the
QPoint versions as overload calling them. This is
more in-line with the event accessors using float
and allows for removing some workarounds using a delta when
converting touch points.
Leave QPlatformWindow::map(To/From)Global() as is
for now and add helpers for float.
Change-Id: I2d46b8dbda8adff26539e358074b55073dc80b6f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In this case the srb represents the layout only, and can still be used
to create a pipeline. For setShaderResources() one will then need to use
another, layout compatible, srb that references valid resources.
Change-Id: I3ea5b63df3be8847540ca4c0c40fbd29dbed8fb7
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Some goals that have hopefully been achieved are:
- make QPointerEvent and QEventPoint resemble their Qt Quick
counterparts to such an extent that we can remove those wrappers
and go back to delivering the original events in Qt Quick
- make QEventPoint much smaller than QTouchEvent::TouchPoint, with no pimpl
- remove most public setters
- reduce the usage of complex constructors that take many arguments
- don't repeat ourselves: move accessors and storage upwards
rather than having redundant ones in subclasses
- standardize the set of accessors in QPointerEvent
- maintain source compatibility as much as possible: do not require
modifying event-handling code in any QWidget subclass
To avoid public setters we now introduce a few QMutable* subclasses.
This is a bit like the Builder pattern except that it doesn't involve
constructing a separate disposable object: the main event type can be
cast to the mutable type at any time to enable modifications, iff the
code is linked with gui-private. Therefore event classes can have
less-"complete" constructors, because internal Qt code can use setters
the same way it could use the ones in QTouchEvent before; and the event
classes don't need many friends. Even some read-accessors can be kept
private unless we are sure we want to expose them.
Task-number: QTBUG-46266
Fixes: QTBUG-72173
Change-Id: I740e4e40165b7bc41223d38b200bbc2b403e07b6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Qt::UNICODE_ACCEL had no effect since at least Qt 4.0. We can drop
it in Qt 6. The whole Qt::Modifier enumeration is still widely
used, so we can't drop it yet, but we should aim at doing so in
Qt 7. Add a note.
[ChangeLog][QtCore][Qt::Modifier] The Qt::UNICODE_ACCEL enumerator
has been removed. It had no effect since Qt 4.0.
[ChangeLog][QtCore][Qt::Modifier] Usage of the enumerators in
the Qt::Modifier enumeration is discouraged. The enumeration
will likely get removed in the next major version of Qt.
Change-Id: If25f30d920878d32903b91a38044f5da042c7eab
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
And generate a few more test projects that were missing.
Change-Id: I5df51106549aa5ae09bc3c42360e14b143719547
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is in preparation for regenerating them with the new qt_foo
prefixed APIs.
Change-Id: Iff34932d642b1c0186ee39f952adf3ad367fd602
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
There doesn't seem to be any reason users will need to query tablet
devices by their IDs, because every event comes with a complete
instance already, and we have QInputDevice::devices() to list them all.
QPointingDevicePrivate::tabletDevice() can create a new instance if a
matching one is not found (and complains about that); it's intended
for use in QtGui, as a way to find the device if it was not part of the
QWSI event. Now it sets the parent of those auto-created instances
to QCoreApplication to avoid a memory leak.
On the other hand, queryTabletDevice() is intended for use in platform plugins
that need to check whether an instance exists; but they will take care
of creating new instances themselves, and thus have more control over the
parent and the details being stored. Now that the systemId can also be given,
the search is more likely to have a unique result, on window systems
that provide device IDs.
Rename id() to systemId() to clarify that it's a system-specific unique
device ID of some sort, not the same as the uniqueId that a stylus has.
However it seems that in practice, this will often be 0; so clarify that
if it's not unique, QInputDevicePrivate::fromId() and queryTabletDevice()
may not always find the right instance.
Clarify the function usage via comments.
Change-Id: I82bb8d1c26eeaf06f07c290828aa17ec4a31646b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is required to remove the ; from the macro with Qt 6.
Task-number: QTBUG-82978
Change-Id: I3f0b6717956ca8fa486bed9817b89dfa19f5e0e1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The change creates a slight source incompatibility. The main
things to take care of are
* code using printf statements on list.size(). Using qsizetype in
printf statements will always require a cast to work on both 32
and 64 bit.
* A few places where overloads now get ambiguous. One example is
QRandomGenerator::bounded() that has overloads for int, uint and
double, but not int64.
* Streaming list.size() to a QDataStream will change the format
depending on the architecture.
[ChangeLog][QtCore][QList] QList now uses qsizetype to index into
elements.
Change-Id: Iaff562a4d072b97f458417b670f95971bd47cbc6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the default format has letter and word spacing set then these
should be exported in the HTML's body tag. This also adds support
for the reading of letter-spacing and word-spacing set too, so that
the same html outputted can be read back in.
Fixes: QTBUG-83718
Change-Id: Ic4afca21eb05efb779dbf99c6b3c13373e851f15
Pick-to: 5.15
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The API is available by including qopenglcontext.h as usual,
but scoped in the QPlatformInterface namespace. The namespace
exposes platform specific type-safe interfaces that provide:
a) Factory functions for adopting native contexts, e.g.
QCocoaGLContext::fromNative(nsContext, shareContext);
b) Access to underlying native handles, e.g.
openGLContext->platformInterface<QCocoaGLContext>->nativeContext()
c) Platform specific functionality, e.g.
static QWGLContext::openGLModuleHandle()
openGLContext->platformInterface<QEGLContext>->doSomething();
The platform interfaces live close to the classes they extend,
removing the need for complex indirection and plumbing, and
avoids kitchen-sink modules and APIs such as the extras modules,
QPlatformFunctions, or QPlatformNativeInterface.
In the case of QOpenGLContext these platform APIs are backed
by the platform plugin, so dynamic_cast is used to ensure the
platform plugin supports the requested interface, but this is
and implementation detail. The interface APIs are agnostic
to where the implementation lives, while still being available
to the user as part of the APIs they extend/augment.
The documentation will be restored when the dust settles.
Task-number: QTBUG-80233
Change-Id: Iac612403383991c4b24064332542a6e4bcbb3293
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Skip crashing tests and ignore failing tests on CMake platforms.
Add missing QTEST_ENVIRONMENT=ci env var assignment to Coin test
instructions. This was hardcoded by the Coin code for qmake
configurations.
Task-number: QTBUG-85364
Change-Id: Id2312e504a0d36b8f8596d4cebaa49c63731406e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The platform plugins are implemented to grab the entire screen if
no window ID is provided. They do not grab the entire virtual
screen, just the screen the method is called on.
On macOS, the implementation ignored the window parameter, and
always grabbed the entire virtual screen. This change fixes the
cocoa implementation. The test passes in local tests (with two
displays with different dpr). Since grabbing a screen returns an
image with managed colors, we need to convert it to sRGB color
spec first, otherwise displaying a grabbed image will produce
different results. This will need to be changed once Qt supports
a fully color managed flow.
The test does not cover the case where a window spans multiple
displays, since this is generally not supported at least on macOS.
The code that exists in QCocoaScreen to handle that case is
untested, but with the exception of the optimization it is also
unchanged.
Done-with: Morten Sørvig <morten.sorvig@qt.io>
Change-Id: I8ac1233e56d559230ff9e10111abfb6227431e8c
Fixes: QTBUG-84876
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Required by OpenXR. A VkPhysicalDevice or an adapter LUID + feature
level pair should be adoptable while leaving the rest (device, queue,
etc. setup) to QRhi as normal.
Change-Id: Iada0972671b037b4efb03e7831b7c9b8c5f2393d
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
[ChangeLog][QtCore][QByteArray] Remove method overloads taking
QString as argument, all of which were equivalent to passing the
toUtf8() of the string instead.
Change-Id: I9251733a9b3711153b2faddbbc907672a7cba190
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The idea was to keep nagging us to update all the platform plugins to
do device registration. But besides being annoying, it would cause
test failures if we start adding QTest::ignoreMessage() all over,
and then some platforms start doing device registration properly.
Change-Id: Ia0fbb64cf86f33532be032ec9eebe6e4ad607f20
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
There is no reason for keep using our macro now that we have C++17.
The macro itself is left in for the moment being, as well as its
detection logic, because it's needed for C code (not everything
supports C11 yet). A few more cleanups will arrive in the next few
patches.
Note that this is a mere search/replace; some places were using
double braces to work around the presence of commas in a macro, no
attempt has been done to fix those.
tst_qglobal had just some minor changes to keep testing the macro.
Change-Id: I1c1c397d9f3e63db3338842bf350c9069ea57639
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This was causing some bogus failures in Qt Quick autotests.
Existing APIs like QQuickWindow::mouseGrabberItem() are not really
compatible with the idea of a mouse-less system; but perhaps we can
revisit this later.
Task-number: QTBUG-85114
Change-Id: Id1c2e5894e5cf13a79998aaea28d5f42fad920cf
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
We want every QInputEvent to carry a valid device pointer. It may be
some time until all QPA plugins are sending it, but it's necessary to
provide the functions for them to start doing that.
We now try to maintain the same order of arguments to all the functions.
handleTouchEvent(window, timestamp, device, the rest) was already there
(except "device" has changed type now), and is used in a lot of platform
plugins; so it seems easiest to let that set the precedent, and modify
the rest to match. We do that by adding new functions; we can deprecate
the older functions after it becomes clear that the new ones work well.
However the handleGestureEvent functions have only ever been used in
the cocoa plugin, so it's easy to change their argument order right now.
Modify tst_qwindow::tabletEvents() to test new tablet event API.
Task-number: QTBUG-46412
Change-Id: I1828b61183cf51f3a08774936156c6a91cfc9a12
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
...starting with a new feature: registering different devices at
different seats and verifying their capabilities and that we can get
them back again.
Change-Id: I8e58a49080633753d02a76e5fdc4932f5c674e0a
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
We have seen during the Qt 5 series that QMouseEvent::source() does
not provide enough information: if it is synthesized, it could have
come from any device for which mouse events are synthesized, not only
from a touchscreen. By providing in every QInputEvent as complete
information about the actual source device as possible, we will enable
very fine-tuned behavior in the object that handles each event.
Further, we would like to support multiple keyboards, pointing devices,
and named groups of devices that are known as "seats" in Wayland.
In Qt 5, QPA plugins registered each touchscreen as it was discovered.
Now we extend this pattern to all input devices. This new requirement
can be implemented gradually; for now, if a QTWSI input event is
received wtihout a device pointer, a default "core" device will be
created on-the-fly, and a warning emitted.
In Qt 5, QTouchEvent::TouchPoint::id() was forced to be unique even when
multiple devices were in use simultaneously. Now that each event
identifies the device it came from, this hack is no longer needed.
A stub of the new QPointerEvent is added; it will be developed further
in subsequent patches.
[ChangeLog][QtGui][QInputEvent] Every QInputEvent now carries a pointer
to an instance of QInputDevice, or the subclass QPointingDevice in case
of mouse, touch and tablet events. Each platform plugin is expected to
create the device instances, register them, and provide valid pointers
with all input events. If this is not done, warnings are emitted and
default devices are created as necessary. When the device has accurate
information, it provides the opportunity to fine-tune behavior depending
on device type and capabilities: for example if a QMouseEvent is
synthesized from a touchscreen, the recipient can see which touchscreen
it came from. Each device also has a seatName to distinguish users on
multi-user windowing systems. Touchpoint IDs are no longer unique on
their own, but the combination of ID and device is.
Fixes: QTBUG-46412
Fixes: QTBUG-72167
Task-number: QTBUG-69433
Task-number: QTBUG-52430
Change-Id: I933fb2b86182efa722037b7a33e404c5daf5292a
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The Vulkan spec changed the behavior for VkApplicationInfo::apiVersion
in 1.1, conveniently breaking compatibility with all existing 1.0 logic.
We can no longer assume that the 1.0 behavior, which was failing instance
creation with VK_ERROR_INCOMPATIBLE_DRIVER for an unsupported version,
is always in place. So do not rely on this in the test, and add a
reminder in QVulkanInstance docs as well.
Fixes: QTBUG-85040
Change-Id: I8f5c7a7830877b72d106c444aebfaea191083ee0
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
Amends 32b586864e, which added an override
of QStandardItemModel::roleNames(). It's good for it to have its own
QHash so that roles can be added, and because
QStandardItemModel::setItemRoleNames() remains un-deprecated; but before
that change, they were the roles that QAbstractItemModel had initialized
from QAbstractItemModelPrivate::defaultRoleNames(). In particular, we
need "display" to map to Qt::DisplayRole by default; several tests in
qtdeclarative depend on that.
Change-Id: I58b2d6aa6b6c78b1d618335ddc4ecb834af57274
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Remove QDestopWidget public header, simplify the implementation that
maintains a Qt::Desktop type QWidget for each QScreen, and turn
QWidget's initial target screen into a QScreen pointer.
QApplication::desktop() now takes an optional QScreen pointer, and
returns a QWidget pointer, so that applications and widgets can get
access to the root widget for a specific screen without having to
resort to private APIs.
QDesktopWidgetPrivate implementations to look up a screen for an index,
widget, or point are now all inline functions that thinly wrap
QGuiApplication::screens/screenAt calls. We should consider adding those
as convenience APIs to QScreen instead.
Note that QWidget::screen is assumed to return a valid pointer; there is
code that handles the case that it returns nullptr (but also code that
trusts that it never is nullptr), so this needs to be defined, verified
with tests, and asserted. We can then simplify the code further.
Change-Id: Ifc89be65a0dce265b6729feaf54121c35137cb94
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Many of these were generated by clazy using the new qevent-accessors check.
Change-Id: Ie17af17f50fdc9f47d7859d267c14568cc350fd0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The default font on Windows 10 (Segoe UI) will return the
wrong minimum right bearing at some sizes, which will cause
us to skip the textWidthVsWIdth() test at some scale factors,
since we cannot trust the layout to be perfect in this case.
Based on experiment, Arial is more accurate, so in order to
avoid skipping the test, we default to this on Windows instead.
(Note: The problem has not been observed with the default fonts
on Linux or macOS, so we only do this for Windows specifically.)
Task-number: QTBUG-84415
Pick-to: 5.15
Change-Id: I8cdb5d0d9922915a6ed1574d62a561dda0e1dc5d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
There are some slight differences between normal drawText()
and QGlyphRuns/QStaticText for decoration widths in certain
fonts. We decided to accept this and tried working around it
in the test by using ForceIntegerMetrics (since the difference
is < 0.5 pixel). This enum has been deprecated, so we move
the tests into Lancelot instead, since the idea here is to
test for regressions, not to compare the two painter commands.
Note that there is something off about decorations with
drawGlyphRuns() and drawStaticText() which is exposed
(not caused) by this, perhaps related to using a matrix
for positioning, since that was untested before.
This also takes the liberty of moving the emoji test string
from text.qps, since this was not in the statictext.qps yet.
Change-Id: Ib2d697095cbd11829cdd50b3c0268c85e9607c78
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We don't want to have untested qtbase.
This reverts commit 3598ffcc26.
This change also skips two network tests on b2qt.
Change-Id: I5c6f5e19487775f0a1c0feafa5e085208cbf7e9a
Reviewed-by: Liang Qi <liang.qi@qt.io>
The helper processes were not in the correct location.
Change-Id: I0a80a22a931625ea0c9370db38ff29c881b964cb
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Since the variable names in QShaderDescription are later compared to
QByteArrays we can gain some performance from not having to convert them
to QByteArrays later.
Task-Id: QTBUG-83706
Change-Id: Iaf80d0966f45cbb09e7c1000b7854bc488e57bb3
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Windows unexpectedly passes PM_NOYIELD flag in wParam parameter to the
hook procedure, if ::PeekMessage(..., PM_REMOVE | PM_NOYIELD) is called
from the event loop. So, to ignore undocumented flag, we should
interpret wParam as a bit field.
Thanks to Robin Lobel for research.
Pick-to: 5.15
Fixes: QTBUG-84562
Change-Id: Ib16d7d747aebc9a3628e4ee67478c4d3edeb96f1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Some fonts misreport the minimum right bearing, and in those cases
we may not be able to do a perfect text layout inside the bounds
set. This is a limitation we have chosen to accept.
To avoid random failure when testing this, we detect the case and
skip the test if we see that it may fail.
Fixes: QTBUG-84415
Pick-to: 5.15
Change-Id: I6b53ea2631c5c6e476e2902b5514829a2141796f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
ExtendedRgb should be treated as Rgb as it can be an automatic upgrade.
Pick-to: 5.15
Change-Id: I2942a1067ed5cacb2f60f303f467887cb44c36dd
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
For historical reasons we use build and release instead of create and
destroy. This becomes confusing now that more modules in Qt start taking
QRhi into use. Migrate to the more familiar naming, so those who have
used QWindow or QOpenGLContext before will find it natural.
Change-Id: I05eb2243ce274c59b03a5f8bcbb2792a4f37120f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The bold+italic combination indicated by ***triple stars*** requires
this; but it enables combinations of italics, bold, strikeout, anchor
text (and associated link formatting), image alternate text, and inline
code formatting (monospace). A code span overrides the formatting from
surrounding spans (which might be a bug to fix in another patch, if we
compare to how md2html formats code nested in bold-italics for example),
but the format stack restores state when any char format span ends.
Task-number: QTBUG-81306
Pick-to: 5.15
Change-Id: I289556fa53de400eb50a4d159b9b344eafc517da
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When storing a void* pointer to the texture handle, we had
to ensure that the variable would exist until the build phase,
which is error prone and caused errors in QQuickWidget because
we copied the texture ID from the FBO into a local variable
before passing it into QQuickWindow::setRenderTarget().
The reason for using a void* was that we cannot know the width
of the handles in the different backends, but we do know that
they are 64-bit at maximum, so instead of storing potentially
dangling pointers, we just make it a 64-bit integer and cast
it back and forth in the backends.
Task-number: QTBUG-78638
Change-Id: I7951e24351ddb209045ab6197d81eb1290b4da67
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The native command buffer handle was not updated, so the subsequent
finish() call attempted to record an invalid VkCommandBuffer. The
problem was not present with offscreen frames, only when finish() is
called with a swapchain-based frame active.
Task-number: QTBUG-84066
Change-Id: I9c4cb701c3dbbc28f237d6ae1cbf65aafd1fa95f
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
It simplifies the API and reduces surprise to have rotation working by default.
On Android, the manifest specifies which orientations the application has
been designed to support; on iOS, it is controlled via the
UISupportedInterfaceOrientations property list key.
In addition, QWindow::contentOrientation() is another way to give
a hint to the window manager, or on iOS to directly control whether
the window's rotation is locked or not.
Task-number: QTBUG-35427
Task-number: QTBUG-38576
Task-number: QTBUG-44569
Task-number: QTBUG-51012
Task-number: QTBUG-83055
Change-Id: Ieed818497f686399db23813269af322bfdd237af
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Also remove dead code that isn't compiled anymore in Qt 6 builds.
Change-Id: I7a7ae35e61fb2ad9cc21180fb7224357ade1505f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
In that specific wrapping mode, it will first try a normal word wrap. If
it doesn't fit within the specified line width it will discard the
result of that and try WrapAnywhere by calling layout_helper()
recursively. The problem was that at the point it called itself again it
had already adjusted eng->maxWidth:
eng->maxWidth += line.textWidth;
This was not restored, but carried on to the recursive call to
layout_helper(), so the end result was that the maximumWidth would
accumulate text widths from parts of the same line twice.
Due to the same recursive behavior the minimumWidth also had a problem:
It always returned the width of the widest word because it took the
qMax() of the minimum widths of the two passes, (WordWrap and then
WrapAnywhere) effectively making the minimum width always be the width
of the widest word (even though it could wrap at finer granularity).
Pick-to: 5.15
Task-number: QTBUG-77337
Change-Id: Ie7e9c17b157506352c2da38cc7f4a8dfa1283966
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The proper solution is to use qint32 everywhere, but that is left as
a separate exercise.
Change-Id: Id0c06b102b56a1b3b48dd67c6c29c28da7d1f22d
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
If there is a negative right bearing on the last character of the string,
it will stretch past the tab position (which aligns the advance position,
and not the right edge of the glyph). For certain fonts, this would cause
the actual ideal width to be calculated as 301 instead of 300 (which is
the right alignment edge set in the code).
Pick-to: 5.15
Fixes: QTBUG-46206
Change-Id: I03e8b8fb86e9ebe5337d3ba3384ade73d2ccdd69
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
