The object replacement character (U+FFFC) is used to represent
inline objects such as images in rich-text. To enable this,
we have special handling of it in QTextEngine. For classes
where inline images are not supported, it will just be hidden
from the visual text, which is unexpected.
Instead of always special-casing it, we make this dependent
on whether the document layout has registered any object handlers.
If they have not, then there will be no visual representation of
the object, and it is better to show the glyph for it.
For anything based on QTextDocument, there will always be the
image handler, so U+FFFC will still have special handling there,
but for non-rich labels and plain text editors the glyph will
be shown instead.
Note that there was also a bug in QLineEdit, where the object
replacement character was always replaced by a space. This was
introduced in 2007, in a patch which replaced a !ch.isPrint()
with a check for "the most obvious non-printable characters"
to reduce the number of characters that were not shown. However,
U+FFFC is a printable character and would thus not have been
filtered by the !isPrint() condition, so I think this was a
mistake at the time. However, due to the special-casing of
the character in Qt, it would not have had any effect until
now.
This also changes the QTextLayout::cursorToXForInlineObject()
test to actually test proper inline objects, as this was
previously using a hack which depended on the inline object
code to be used even for plain QTextLayouts with no handlers
for these.
[ChangeLog][Text] The object replacement character (U+FFFC)
is now only filtered out in rich text controls, where they
represent inline objects. In other controls, its glyphs will
be shown as with other text.
Pick-to: 6.5
Fixes: QTBUG-101526
Change-Id: I7fcaf2b10918feb41589e1098016efbf79a0e62d
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Variant-selectors are special unicode symbols which are used to
modify glyph selection for the preceding character. For instance,
a regular symbol could be turned into a color emoji using VS16,
the emoji variation selector. In order for this to work, however,
the font that handles the selector has to handle the full pair of
characters, so that it can apply the correct substitution rules.
One specific example of this was on macOS, where an airplane
symbol + VS16 would match the symbol to the default UI font but
the VS16 to the emoji font. Since there string provided for the
emoji font did not have any preceding character for VS16, we just
ignored it.
To improve on this, we now detect variation selectors that have
been matched to different font engines than the preceding
character. When such a case occurs, we check if the selector font
also supports the preceding character, and if it does, we keep
the pair together and use the same font for both.
[ChangeLog][QtGui][Text] Fix some cases where a variation-selector
character would be ignored in font selection and the correct
variant of a character would thus not be selected.
Task-number: QTBUG-108799
Change-Id: I9f427e0520e652ee2f24a4f7dc3c1957251e06bd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add storage buffer memory qualifier and run time array stride information
to QShaderDescription::StorageBlock.
Memory qualifiers allow more informed selection of RHI resource buffer
binding (bufferLoad / bufferStore / bufferLoadStore) function.
Run time array stride (for last block member unsized array) allows
packing of buffer data for transfer to / from GPU. Without this
information, applications must infer or guess which packing rules
(std430 / std140) are in use.
Change-Id: I676d7e848afefd40d01cdd463c569b07022b683e
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Input events that originate from actual device interaction should reflect the
device's state, and device and events need to be kept in sync so that event
sequences (such as multi-touch events, where we have begin/update/end cycles
spanning multiple events) are working correctly.
For that reason, the event point data in pointer events is explicitly shared,
and we only detach in exceptional situations. This saves us memory allocations,
and makes sure that the event point data carried by events, and the event point
data stored persistently in the device, are kept in sync.
Cloned pointer events do not originate from device interactions, and should
therefore not sync back to the device. E.g. accepting a clone should not modify
the original event data stored in the device. There are exceptions here as
well, e.g. when cloning an event in Qt in order to deliver a translated version
of it to a different scene. Different points might even get delivered to
different scenes or windows, or at least different items in the same scene. For
that reason, we explicitly detach, and then explicitly write back the relevant
states after the cloned event has been delivered.
But in general, we should assume that cloned events do not write back to the
device. Since QEventPoint is an explicitly shared data type that never detaches
itself, we have to explicitly detach it when making copies that should not be
shared.
The ideal implementation of this would be to do the detach in the copy
constructor of QPointerEvent, which is called when cloning. However, Qt itself
makes copies of QPointerEvent without using clone, e.g. when assembling lists
of touch events for the different subscenes or windows in
QGuiApplicationPrivate::processTouchEvent, where event objects are added to a
QVarLengthArray<QMutableTouchEvent>. This makes copies, and those copies must
not detach.
So we have to implement the special cloning behavior in each override of
QPointerEvent::clone(). For this, introduce a dedicated macro for the common
member functions. This macro must be used for QPointerEvent subclasses.
Fixes: QTBUG-107560
Change-Id: I4b56f9e71c7d067ba9054a2a631e8ba5bc7b1ab9
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This amends fccd419dd6.
If Harfbuzz failed on one of the items in a string and returned
zero glyphs, then we would exit the shaping loop. The mentioned
change fixed a crash related to this when the ignored character
was the only character in the string, but it occurred in a
subitem of a longer string, then we would return and fail to
lay out the rest of the string.
This popped up recently because an update to Harfbuzz has caused
it to return zero glyphs when applying the Apple emoji font to
an isolated variant character (see bug report). When we matched
the symbol to the main font and only the variant character to
the emoji font, we would get in this situation, and end up
exiting the shaping early.
[ChangeLog][QtGui][Text] Fixed a regression which would
sometimes cause text to disappear if the string contained
an unmatched variation selector character.
Pick-to: 6.4
Fixes: QTBUG-108799
Change-Id: I616ab1b2d33c2df731419c5ce06fbc578a625a32
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When Harfbuzz returns zero glyphs, this will typically be because
the character is ignored. We currently have no way to differentiate
this from actual error cases, so to avoid return the error glyph
for cases which are not really errors, we set the dontPrint flag
for this.
When we add a way to differentiate between error cases and non-error
cases later, we should revert this for the actual errors.
Pick-to: 6.4
Task-number: QTBUG-108799
Change-Id: I2a910d951b71c705fb4dd761fcfe3a942b3afa7c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
After 109e088c7c, cache keys were unique
for palettes with different private or data instances, but the key did
not change when a palette without any shared copies was modified, as
that does not create new private data structures.
To fix this, always increase the counter for the private data structure,
also when not detaching from shared copies.
Augment test case with scenario that broke.
Pick-to: 6.4
Fixes: QTBUG-108709
Change-Id: I606abfb8b1a03e515e46b10dc840a631eb31d496
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: JiDe Zhang <zhangjide@uniontech.com>
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
This is improved version of previous fix
013c346a8d that was reverted because it
broke some tests for Quick Text. The problem was that it did not work
correctly in the case the text was wrapped to a fixed width.
To deal with this we'll accumulate current line full width (as if it
hadn't been wrapped) in layout data (layoutData->currentMaxWidth).
Then when the next line is explicitly wrapped by line or paragraph
separator, this accumulated width will be used to adjust layout's
maximum width.
Change-Id: Iad7119d9808e1db15fe1fbc5db049c3db928529f
Fixes: QTBUG-89557
Fixes: QTBUG-104986
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
In Qt 5, QWin(dows)Mime and QMacMime lived in the respective Extras
modules, which were removed and partially folded into the relevant
modules in Qt. QWindowsMime and QMacMime continued to provide the
abstraction for implementing built-in support for native clipboard
formats and UTIs within Qt, but only as private APIs.
After the recent clean up of those APIs and respective infrastructure,
we can now bring them back as public converter interfaces. Application
developers can subclass those and instantiate an instance of their
implementation to add support for platform or application specific
data formats.
These interfaces are not in the QNativeInterface namespace, as
applications don't call into Windows or macOS using those interfaces.
I.e. there is no class on which an application would call
auto *converter= nativeInterface<QWindowsMimeConverter>();
Also, since applications override those converter types, we do want to
guarantee binary and source compatibility.
[ChangeLog][QtGui][QWindowsMimeConverter] Reintroduced to allow
applications to add support for conversion from and to Windows-native
clipboard formats to MIME-encoded data.
[ChangeLog][QtGui][QUtiMimeConverter] Reintroduced to allow
applications to add support for conversion from and to clipboard data on
macOS and iOS to MIME-encoded data.
Fixes: QTBUG-93632
Change-Id: Iebd909c3970015d203f59d5ab15e306b3d312f6e
Reviewed-by: Yuhang Zhao <2546789017@qq.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Support for 1D textures on Vulkan, OpenGL, Metal, and D3D.
Change-Id: Ie74ec103da9cfcbf83fa78588cf8cfc1bd6e104f
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Skip on crashing tst_qvulkan test
Blacklisted completer_data on qfiledialog
(8d76c5af51 should have been enough but
it is still failing)
Task-number: QTBUG-108328
Task-number: QTBUG-108329
Change-Id: Iad5573af60cca16d16ba0462293e276186e25653
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Upon programmatic window state changes, windowStateChange was fired
once in QWindow::setWindowStates and once when the visual state had
been changed by the window interface.
This patch adds if guards to ensure that the singal is fired only once.
It adds a corresponding autotest to tst_QWindow.
tst_QWidget::resizePropagation() is adapted to no longer expect double
signal emission.
Fixes: QTBUG-102478
Pick-to: 6.4 6.2
Change-Id: If093c0a883d76d8a676e4fab90db6b0676452267
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When comparing a glyphIndex with a hard coded number, the number is
cast to an int, whereas the glyphIndex is an unsigned int.
That causes a compiler warning.
This patch forces the numbers to be cast to an unsigned int.
Change-Id: I8a31124c6afacfc4ecfb13caf2cb8133dad44a21
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Debug serials and detatch numbers of deep and shallow detatch in test
function cacheKey, if it fails.
That implicitly removes a compiler warning about these variables being
unused.
Change-Id: I481f4b63e3ed0d50fb442dffc658b97d913059bc
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This is a semantic patch using ClangTidyTransformator as in
qtbase/df9d882d41b741fef7c5beeddb0abe9d904443d8, but extended to
handle typedefs and accesses through pointers, too:
const std::string o = "object";
auto hasTypeIgnoringPointer = [](auto type) { return anyOf(hasType(type), hasType(pointsTo(type))); };
auto derivedFromAnyOfClasses = [&](ArrayRef<StringRef> classes) {
auto exprOfDeclaredType = [&](auto decl) {
return expr(hasTypeIgnoringPointer(hasUnqualifiedDesugaredType(recordType(hasDeclaration(decl))))).bind(o);
};
return exprOfDeclaredType(cxxRecordDecl(isSameOrDerivedFrom(hasAnyName(classes))));
};
auto renameMethod = [&] (ArrayRef<StringRef> classes,
StringRef from, StringRef to) {
return makeRule(cxxMemberCallExpr(on(derivedFromAnyOfClasses(classes)),
callee(cxxMethodDecl(hasName(from), parameterCountIs(0)))),
changeTo(cat(access(o, cat(to)), "()")),
cat("use '", to, "' instead of '", from, "'"));
};
renameMethod(<classes>, "count", "size");
renameMethod(<classes>, "length", "size");
except that the on() matcher has been replaced by one that doesn't
ignoreParens().
a.k.a qt-port-to-std-compatible-api V5 with config Scope: 'Container'.
Added two NOLINTNEXTLINEs in tst_qbitarray and tst_qcontiguouscache,
to avoid porting calls that explicitly test count().
Change-Id: Icfb8808c2ff4a30187e9935a51cad26987451c22
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Two rows shared the same name. They claimed the value used was out of
range, but actually that was only true for one of them. The other was
in range, but the test reduced the number of digits allowed after the
decimal point, thereby making it invalid, so rename that one to
reflect this.
Change-Id: I0936ea25ec799c0069cd148b9f9bae5d35906093
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Include the spacings used, to avoid a naming collision.
Change-Id: Iaf78f7142f6780dcf4c7a0b973db9f625af06767
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Avoid duplication by distinguishing similar test-cases.
Change-Id: I1a100d6c9729f0ea356f177535d15c3d36e2da9e
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The test used to trigger a lot of QWARN messages; these are clearly
intended, so tell QTest to expect them, so that we get an error here
if those warnings ever don't show up.
Incidentally tidy up a comment and convert a != verify to a
QCOMPARE_NE(), since it's now available to do that job.
Change-Id: I83e225c37abe8446dac06ebe4e75258cb87b71b0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
In the process, clean up the building of the data tags: use a
range-for loop, albeit we do need an index to show in tags; show it
and the angle in the tags using addRow()'s easier formatting. Change
the low angle tests to show the sign of the angle (which is how they
differ)rather than just labeling them 1 and 2.
Change-Id: Ib5aaa3e22d771c530c9343ba368b0fdfceb264ce
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
The last three duplicated earlier ones; and their names didn't take
into account the circle that had been added to the path since those
tests. So revise their names to reflect that.
Change-Id: I32d74f21947b4ba0c04eee53daf8efde6b4a6409
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Two rows shared a data tag. Prefixed one of them with the color of the
half-transparent image it involves (the other's is fully transparent).
Change-Id: I1bd174008ed29bcf2f460e683fdf6d1f12ba19d0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The same data tags were used with two distinct filenames in their
data. Include the basename of each filename in the data tag, to avoid
duplication.
Change-Id: I216fecbd413fab409227ad6f93f8ac3fcc74b059
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The "a" and "A" rows appeared under Valid, then again under Only Keys.
The two copies were identical, in each case, so drop the latter.
Change-Id: Ib3d84710e772171bb4a5e0aefd20022810fb41cd
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
In Qt 6, after changes such as 121fddcf5a,
we go through the QPA layer to close widget windows properly. Closing
and hiding of windows is now done in when we receive and handle the
window system's CloseEvent.
Such an event to a modally blocked window should be blocked, so that
users can't close a modally blocked window. However, if the event is the
result of a call to QWindow::close, then it should not be blocked.
Luckily, we know that the event is the result of such a call, so let
such events through. This restores compatibility with Qt 5, where it was
possible to first open a new dialog, and then close the previous dialog.
Add a test case.
Fixes: QTBUG-107188
Pick-to: 6.4 6.2
Change-Id: Id812c1fc36aa0e1a10dfb8d3a16a11d387289b05
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
We've been requiring C++17 since Qt 6.0, and our qAsConst use finally
starts to bother us (QTBUG-99313), so time to port away from it
now.
Since qAsConst has exactly the same semantics as std::as_const (down
to rvalue treatment, constexpr'ness and noexcept'ness), there's really
nothing more to it than a global search-and-replace, with manual
unstaging of the actual definition and documentation in dist/,
src/corelib/doc/ and src/corelib/global/.
Task-number: QTBUG-99313
Change-Id: I4c7114444a325ad4e62d0fcbfd347d2bbfb21541
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Having the same test tag for two rows of a data table makes the report
less useful. We also intend to forbid doing that.
Change-Id: I67ec32514b6550f4f97610a2140f1383d0d85b23
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When laying out a text and calculating maxWidth, we must _always_ take
into account the accumulated width of spaces (lbh.spaceData.textWidth)
regardless of wrapMode, other text content, spaces position, etc.
Fixes: QTBUG-106947
Change-Id: I2ac9af92ed7dd07c1e040bfcf83949a358d1c9c9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
After 1d961491d8, palettes are different
if they either have different brush data, or a different private. Two
privates can share data, but still must generate different cache keys.
The cacheKey has so far been composted of the serial number of the Data
struct, and a detach number that is incremented when we detach the
private.
This failed for two reasons:
- the implicit copy constructor of the Data class copied the serial
number, when it should have incremented it. Fix that by member-
initializing the serial number rather than doing it only in the default
constructor. The member initialization is also executed for the copy
constructor.
- the detach_no logic as it was implemented does not guarantee that two
copies of the same palette that share data, but have different resolve
masks (and thus different privates) have different detach_no values.
Use a static serial counter for that number as well.
Amend the test case to verfiy that cache keys, and the elements of the
cache keys, change when they are expected to.
Fixes: QTBUG-106984
Pick-to: 6.2 6.4
Change-Id: I84d7055ce8bfe0d42f1f8e9766f3f1ad610f4ec8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This introduces a way to trace each entry in the glyph index
array to a specific index in the original text passed to
QTextLayout, as well as a convenience function to access
the original string from the QGlyphRun.
The index information is stored in the logClusters array internally
in Qt, but it contains the inverse information: For each
character in the output string, it contains an index into the
glyph array. In order to get the string indexes for each glyph,
which makes a lot more sense in the context of the QGlyphRun
API, we need to do a little search to construct the data.
To avoid adding unnecessary allocations, we make the new APIs
opt-in. If you do not specify anything, you will only get the
glyph indexes and glyph positions as before. However, you
can now specify exactly which parts of the layout to extract
using an optional flags parameter.
This also adds a manual test which can be very handy to
visualize QTextLayouts and how they are split into QGlyphRuns.
Fixes: QTBUG-103932
Change-Id: Ie4288fff338b9482aba0aba29fc7e1e59fa60900
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
The placeholder text was given its own QPalette color role in Qt 5.12,
but there has been no way to specify it from a Qt style sheet.
Fixes: QTBUG-93009
Change-Id: If58ca844c19c65b7eee14c6d5730a4ba27640c33
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Since setScaledClipRect will actually render only the necessary parts,
there may be insignificant differences in rounding/anitaliasing
compared to rendering the whole image first and then clipping.
Hence this autotest case would always fail. But that would not happen
in CI, since it tests qtbase without the qtsvg module, and then the
SVG tests are skipped. (For some reason, one ran into this in wayland
testing and made an exception for that, but obviously this failure has
nothing to do with wayland).
Work around the issue by converting the rendered images to 4 bpc
format, so the differences in the least significant bits get truncated
away.
Fixes: QTBUG-100917
Task-number: QTBUG-81044
Pick-to: 6.4
Change-Id: I1c14e98af22d0ae22a751960b69e692c7a38399b
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This reverts commit 013c346a8d. It was
determined to cause a regression in Qt Quick: QTBUG-106899.
In order to unblock integrations, we need to revert the change. It
can be re-committed later when the problem has been analyzed and
addressed.
Pick-to: 6.2 6.4
Fixes: QTBUG-106899
Task-number: QTBUG-89557
Task-number: QTBUG-104986
Change-Id: I04054587f68ab39fdb038b02fc69ebfa3dc7d197
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When laying out, we need to increase layout's maximum width _only_
if the previous line was not explicitly wrapped by a line or paragraph
separator, or if the current line's width is greater than the
previously accumulated layout's maximum width.
Fixes: QTBUG-89557
Fixes: QTBUG-104986
Pick-to: 6.2 6.4
Change-Id: Ib7cc4b9dda8f20166dcbd5cfd3b56424bb33d14a
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The composition implementation may act unexpectedly on Inf or NaN input
values. This change avoid those values, without changing the current
implementation.
Pick-to: 6.4
Fixes: QTBUG-101236
Change-Id: I8e4ee67f53093b7f81e014b28d8a028ba2ddcc47
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Replace the deprecated operator*() calls with various
overloads of QMatrix4x4::map()
Add a separate test for deprecated API and guard it with
QT_DEPRECATED_SINCE checks.
Task-number: QTBUG-104858
Change-Id: Ief2e03198696382dc626f01b209614fe320e70b2
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When TopMargin is set in TextBlock and the mouse click position is
between Margin (the mouse is not on the textrect), the cursor will
usually jump to the end. So topMargin should be considered when
hitTest() calculates coordinates.
Fixes: QTBUG-91774
Pick-to: 6.4 6.3 6.2
Change-Id: I231377263855b9cd7152684203fc4ed2e9299bb9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tang Haixiang <tanghaixiang@uniontech.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
On Wayland there is a special case when decorations are enabled,
where we post an initial update request to ensure widgets are
redrawn after the buffer is recreated (see
af7b60ade5c4be81cbc58eb18307c017d5594071 in qtwayland). To
make sure the test behaves the same on Wayland as on other
platforms, we disable client-side decorations when running
these tests.
The flag is primarily required for the requestUpdate() test
at the moment, but it is only queried once per application
run, so it has to be set before any tests are run.
Pick-to: 6.4
Fixes: QTBUG-100889
Change-Id: Ica6d744083ecae4a3722b6d04b956e7615f0dfe5
Reviewed-by: Inho Lee <inho.lee@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
It was an old test written in a very low-level way, which perhaps is ok
to be independent of testlib in a few tests; OTOH, it was blacklisted
on a couple of platforms. Perhaps doing touch events the standard way
could be more stable.
While we're at it:
- verify that the touch events are accepted, and thus verify the new
bool return value from commit()
- implement paintEvent() to help understand the layout, and touchpoint
locations
- remove repeated QCOMPARE lines
- skip the test if window positioning fails
- try to un-blacklist it, on the assumption that window positioning
failure was the reason
Task-number: QTBUG-87025
Task-number: QTBUG-104656
Pick-to: 6.4
Change-Id: Ie22eb24abf95cd849990a56212be87d06ce8e574
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Doris Verria <doris.verria@qt.io>
The paletteChanged() and fontChanged() signals were deprecated
in Qt 6.0, but the test was still using them unconditionally.
This patch guards the usage of the deprecated signals with
the usual QT_DEPRECATED_SINCE(6, 0) check, so that the test
can be built and run with QT_DISABLE_DEPRECATED_UP_TO >= 0x060000
This commit amends 68ea9c0227
Task-number: QTBUG-104858
Change-Id: Idb2da6d91afcdb664f325f23ec625947c9a7fac0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The client does not know its global window position on Wayland,
so testing for this will not work.
Pick-to: 6.4
Fixes: QTBUG-100888
Change-Id: Ibdfc84f1b33d25223dbd740603ce4783c21afc70
Reviewed-by: Inho Lee <inho.lee@qt.io>
The value will be propagated from Qt build.
Task-number: QTBUG-104858
Change-Id: Iae2c32c3037438f41b92f9ee28004f30eb4e3210
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The new name describes the behavior in a better way.
[ChangeLog][Build System] The QT_DISABLE_DEPRECATED_BEFORE macro is
renamed to QT_DISABLE_DEPRECATED_UP_TO. The old name is deprecated, but
is still recognized if it is defined during configuration and the new
name is not defined.
Task-number: QTBUG-104944
Change-Id: Ifc34323e0bbd9e3dc2f86c3e80d4d0940ebccbb8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This fails on Android 12 in CI.
Task-number: QTBUG-105739
Pick-to: 6.4 6.3 6.2
Change-Id: Ibf3deb6b84564f12b5172f2522875fe70f8ce87b
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This fails on Android 12 in CI.
Task-number: QTBUG-105738
Pick-to: 6.4 6.3 6.2
Change-Id: I94fcefae3d88087cd96f4043b015f9469ed629a9
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The default camera to plane distance is 1024, when rotating a big image
along the x or y axis, some areas of the screen may move above the
camera, causing the rotation to fail. A new rotation interface has been
added to allow users to specify the distance from the camera to the
plane themselves when rotating the QImage. Also, this support has been
added to QMatrix4x4::projectedRotate.
[ChangeLog][QtGui][QTransform] Added overloads to rotate() and
rotateRadians() that allow specifying of the distance to the rotation
plane.
Fixes: QTBUG-105088
Change-Id: I81f629916ddd9b6ab84e0282191e4284a88a85f5
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Running tst_qrhi -platform eglfs will pass on RPi4 / Mesa 22.
This does not test Vulkan of course since the platform plugin cannot
create a Vulkan instance.
Running tst_qrhi -platform vkkhrdisplay will enable Vulkan but will
still try OpenGL since the autotest does not query the platform
integration about OpenGL support. Make this nicer by skipping most of
the GL test if the platform integration we have cannot handle OpenGL
stuff anyway.
For some tests the data-driven approach has to be removed since doing
QFETCH without any rows will crash. These two OpenGL-specific tests
now check OpenGL support directly and QSKIP if needed.
While we are at it, fix up the Vulkan instance API version as well.
Pick-to: 6.4
Change-Id: I2891c04540bc2dfd0ccf475629bd23542bff15f5
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
If a font family has several instances from different foundries,
we disambiguate this by adding the foundry name in brackets behind
the family. But QFontDatabase::hasFamily() would only check for
families().contains(familyName). So if the database contains e.g.
Foo [Bar] and Foo [Baz] then a check for hasFamily("Foo") would
fail.
So we need to actually check for the family name instead. In
doing this, we also skip the extra step of building the list
and then searching it, but just go directly to the source.
This removes the BLACKLISTing of Ubuntu and also introduces a
QSKIP on Unix-based platforms without fontconfig, since there
is no way to know which default fonts are acceptable on those
platforms.
Pick-to: 6.4
Fixes: QTBUG-86967
Change-Id: Id8ad80a1671daf1c14fbad8bb8f4c51ee1c59709
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The intialSize bug has been fixed in Qt Wayland Client, and thus
this test will now start XPASSing.
Pick-to: 6.4
Task-number: QTBUG-66818
Change-Id: I4b9cb8bd9306a67f04295eb23f09574dad0e97f7
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
We need to skip the exifReadComments test case if reading text from
image has been configured off, like in webOS's Yocto recipe for QtBase.
Fixes: QTBUG-105393
Pick-to: 6.4
Change-Id: If45872ca7ed26620fa38bc6b47132363d661acdc
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Using convertDoubleTo() to get a whole number, from which to determine
the number of digits we're allowed before the fractional part, fails
if the double isn't a whole number, which lead to the skip being
checked. Use qFloor() of the double (as this should have as many
digits as the double had before its decimal point, which is what we
care about; qCeil() might round up to a power of ten).
This amends commit ff6d2cb0d5
Fixes: QTBUG-105341
Pick-to: 6.4 6.3 6.2
Change-Id: I4e0105d4602682c59e9830ec9a37556c96db884e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The vast majority of in-tree users pass simple and short C string
literals as the value. By porting to QByteArrayView, we document that
we'll accept non-NUL-terminated data, and do the NUL-termination
internally, using SSO'ed std::string, saving memory allocations in the
common case of short strings.
I didn't bother to check which direction std::string takes for
nullptrs these days (there was a change accepted in that area for
C++20 or 23), so play it safe and protect against them.
Follow-up to
Task-number: QTBUG-105302
Change-Id: I2369acc62f1d5cbc26135396cfe0602d8c75300c
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
...by removing the entire adjustedFormat() helper.
Qt Quick has never used this, which indicates it is not that
useful. Same goes for Qt Multimedia or Qt 3D. Ensuring depth and
stencil is requested is already solved by using
QSurfaceFormat::setDefaultFormat() or by adjusting the formats
everywhere as appropriate.
The helper function's usages are in the manual tests that use it as a
shortcut, and in the GL backend itself. Remove it and leave it up the
client to set the depth or stencil buffer size, typically in the
global default surface format. (which in fact many of the mentioned
manual tests already did, so some of calls to
window->setFormat(adjustedFormat()) were completely unnecessary)
By not having the built-in magic that tries to always force depth and
stencil, we avoid problems that arise then the helper cannot be easily
invoked (thinking of widgets and backingstores), and so one ends up
with unexpected stencil (or depth) in the context (where the GL
backend auto-adjusts), but not in the window (which is not under
QRhi's control).
It was in practice possible to trigger EGL_BAD_MATCH failures with the
new rhi-based widget composition on EGL-based systems. For example, if
an application with a QOpenGLWidget did not set both depth and stencil
(but only one, or none), it ended up failing due to the context -
surface EGLConfig mismatches. On other platforms this matters less due
to less strict config/pixelformat management.
Pick-to: 6.4
Change-Id: I28ae2de163de63ee91bee3ceae08b58e106e1380
Fixes: QTBUG-104951
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
We can implement the trivial {default,copy,move} construction outselves
inside qmetatype.cpp and qvariant.cpp, simplifying the QMetaType
interface object, removing up to three relocations per QMTI.
This adds the testing for QMetaType::isXxxConstructible and
isDestructible that couldn't be added before.
Change-Id: Ic44396b31ba04712aab3fffd16ff0a28f541d507
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The cause is that the first EXPOSE event comes with the window not
having focus yet. See QTBUG-105177.
Also remove processEvents() as events are always processed when doing
qWaitFor...().
Task-number: QTBUG-105177
Change-Id: I2260d1885388bbf7091c423bc9b4c16e2ed0090f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Previously the failure was been ignored because of the very generic
"linux" entry in the BLACKLIST file
Task-number: QTBUG-105201
Change-Id: I6914fe350f78266fc18541eb8fcd881f5a4ac511
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
+ I could not reproduce the flakiness on OpenSUSE Tumbleweed.
+ No significant flakiness can be seen for this test in our testresults
statistics.
+ Ubuntu-16.04 is no longer part of our CI
Change-Id: I7a18fc3fe2e58af8533171ebae0457b08424e810
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Before a recent fix it would happen occasionally that
lastNormalizedPositions.at(0) would segfault because the list was
empty. The cause of the flakiness was fixed, but make the test more
resilient anyway by checking first the list is correctly populated.
Furthermore on some platforms this check fails:
qAbs(leftWidget.lastNormalizedPositions.at(1).x() - 0.8) < 0.05
So instead of QVERIFY use QCOMPARE_LT to print the values when it fails.
Task-number: QTBUG-104268
Change-Id: Id5430eb53c133cf5d23647cfd9749f01f266efce
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Sometimes XCB_EXPOSE event is being propagated twice, once before and
once after qWaitForWindowExposed(). But the window has focus only after
the second expose event. Changing it to qWaitForWindowActive() fixes the
issue.
Fixes: QTBUG-104268
Pick-to: 6.2 6.3 6.4
Change-Id: Ibc78dd4958ed1a4a8d0967b29d2a53457ab9ae8b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The QTextFormat::FontFamily enum is deprecated since Qt 6.0, however it
is still used in the code.
To retain backward compatibility with the old data stream formats, we
introduce a new internal QTextFormat::OldFontFamily enum value, which
has exactly the same value as QTextFormat::FontFamily, and use it
instead.
Task-number: QTBUG-104857
Pick-to: 6.4 6.3 6.2
Change-Id: Ibf5258b621c2b0aa507005dfe2c1e80c26ddb0d4
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
... when QT_DISABLE_DEPRECATED_BEFORE is past the deprecation version.
This commit actually stops using the deprecated signals when we build
Qt with QT_DISABLE_DEPRECATED_BEFORE >= 0x060000. Otherwise we will
get a compilation error because the signals will be removed.
Task-number: QTBUG-104857
Pick-to: 6.4 6.3 6.2
Change-Id: Ie513ecc9451bf2d88f80857cf19f3d2b4958d022
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
- add move special member functions (docs copied from QHostInfo)
- add member swap
- use move-and-swap, not pure-swap, because these objects hold
resources (handles) other than just memory
- Q_DECLARE_SHARED (it's not implicitly shared, but explicitly)
- adds ADL swap and Q_DECLARE_TYPEINFO
[ChangeLog][QtOpenGL][QOpenGLBuffer] Added member-swap(), move
constructor, move assignment operator.
Change-Id: I22dc92108bdd393fff4361db23e94eaf3d7ea9cc
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Amends 1d961491d8. We modify the resolve
mask after making a shared copy of 'other', so we must detach. Call the
setter designed for that purpose.
Pick-to: 6.4 6.3 6.2
Task-number: QTBUG-98762
Change-Id: I4f45223e74764a341378992172787fae73efb8b7
Reviewed-by: JiDe Zhang <zhangjide@uniontech.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
If the cached font has a different DPI than the one used in
QPainter, we need to treat this the same as if other font
properties have changed and redo the layout.
This happened when running the QStaticText test on Wayland,
because the default dpi was 100 and the QPixmap we ended up
drawing to was 96. This caused the pixel size of the font to
be calculated differently when doing drawText() (using 96 dpi)
and drawStaticText() (using the cached 100 dpi).
Pick-to: 6.4
Fixes: QTBUG-100982
Change-Id: Ie4270341bb8a64b6458eb67ba460a282c65dc26b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Some of the offsets are already quint32 in the API (vertex input
attributes, dynamic offsets, offsets in draw calls), matching the
reality of the underlying 3D APIs, but many buffer-related functions
use int as of now, simply because that used to be the default choice,
and the same goes for sizes (such as buffer or range sizes). This is
not quite consistent and should be cleaned up if for nothing else then
just to make the classes consistent, but also because no 3D API use a
signed type for offsets, sizes, and strides. (except OpenGL for some)
When it comes to strides (for vertex inputs and raw image texture
uploads), those are already all quint32s. This is straightforward
because most of the 3D APIs use 32-bit uints for these regardless of
the architecture.
Sizes and offsets are often architecture-dependent (Vulkan, Metal),
but there is at least one API where they are always 32-bit even on
64-bit Windows (UINT == unsigned int, D3D11). In addition, we do not
really care about buffer or texture data larger than 4 GB, at least
not without realistic use cases and real world testing, which are
quite unlikely to materialize for now (esp. since we still have the
width/height of 2D textures limited to 16 or 32K in many cases even on
desktops, whereas 2GB+ buffers are not guaranteed in practice even
when an API seemingly allows it).
In any case, the important change here is the signed->unsigned
switch. A number of casts can now be removed here and there in the
backends, because the offsets and sizes are now unsigned as well,
matching the underlying API reality. The size can be potentially
increased later on with minimal effort, if that becomes necessary for
some reason.
Change-Id: I404dbc365ac397eaeeb3bd2da9ce7eb98916da5f
Reviewed-by: Inho Lee <inho.lee@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
56bd1b76d2 changed the update
resolve mask behavior in QPalette to avoid detaching brush data
when modifying the resolve mask if the brush value is not changed.
But this behavior broke compatibility, it introduced unknown risks, and
we cannot ensure that other code in Qt does not depend on the old
behavior.
We both need to ensure that we don't detach when the value is not
changed, and ensure that the resolveMask is always updated regardless
of whether the value changes, so we need to split them up and
independently share the brush data.
QFont will update its corresponding resolveMask even if the value has
not changed, so it is better to correct this behavior so that QPalette
and QFont are consistent.
[ChangeLog][QtGui][QPalette] Always update resolve mask in
QPalette::setBrush, even if the value of brush has not changed.
Fixes: QTBUG-98762
Pick-to: 6.4 6.3 6.2
Change-Id: Ib845361b30f21c3d78c16ced923c1678b12e05ac
Reviewed-by: JiDe Zhang <zhangjide@uniontech.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Unblock the qtdeclarative dependency update.
This behavior change is causing a regression for QQmlPreviewHandler's
zoom feature. Back out of the change for now, until we can find a way
to make both use cases work.
This reverts commit 1c0a56a2f3.
Change-Id: I1b3d84504bbcb4f2b2250a20194fdaf4ab4fd97f
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
QFutureCallOutEvent is used externally, so it needs to be exported.
This reverts commit 3141a13b2a.
Fixes: QTBUG-104732
Pick-to: 6.4
Change-Id: I82c9e7414192ee948f78259bd74a404691a7805a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
QT_SCREEN_SCALE_FACTORS in many cases set on behalf of the user,
instead of by the user, so we should make it less sharp and more
in line with standard high-dpi configuration.
Specifically, make it subject to the rounding policy set by
QGuiApplication::setHighDpiScaleFactorRoundingPolicy(). This
means that applications which support integer scale factors
only will see integers only, also when QT_SCREEN_SCALE_FACTORS
specifies a fractional factor.
Users who want to override can set
QT_SCALE_FACTOR_ROUNDING_POLICY=PassThrough
to restore the default Qt rounding behavior.
[ChangeLog][QtGui] The high-DPI scale factor rounding policy (settable with
QGuiApplication::setHighDpiScaleFactorRoundingPolicy() or
QT_SCALE_FACTOR_ROUNDING_POLICY) now applies to scale factors set
with QT_SCREEN_SCALE_FACTORS.
Pick-to: 6.4
Fixes: QTBUG-95930
Fixes: QTBUG-99546
Change-Id: Ibb0aa5cb9d3a356d33429d0efe69d984b2530728
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Test setting both via QGuiApplication property and environment.
Change-Id: Iaccc920adb6294d610b02d4c844aa5b15eb7eecd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Under normal circumstances, when the second point is touched, the
first point has not been released, and the message at this time
should contain two touch points. We are simulating the case where
the message is lost when the popup is closed by touch. Amends
efc02f9cc3
Pick-to: 6.4 6.3 6.2
Change-Id: Ic722e3dbd615c46076ede26611d0107501c5e274
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Make our QRhiMemAllocStats struct a bit more generic, drop the memory
allocation part in the naming, and use the same getter and struct for
reporting some important timings. (we are free to rename for now, there
are no users in other modules yet)
The time spent in graphics (or compute) pipeline creation has a special
relevance in particular with the modern APIs (as it is the single
biggest potentially time consuming blocking operation), but also highly
interesting with others like D3D11 simply because that's where we do the
expensive source-to-intermediate compilation is HLSL source is provided.
In order to see the effects of the various caching mechanisms (of which
there can be confusingly many, on multiple levels), the ability to see
how much time we spent on pipeline creation e.g. until we render the
first view of an application can be pretty essential.
Task-number: QTBUG-103802
Change-Id: I85dd056a39db7e6b25fb1f9d02e4c94298d22b41
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The goal is to make it possible to implement QSGRhiSupport::backendName()
in Qt Quick with just a single line:
return QString::fromUtf8(QRhi::backendName(m_rhiBackend));
instead of duplicating the strings and the logic.
Similarly, QBackingStoreRhiSupport can now drop its apiName() helper
entirely.
Change-Id: Ia8cbb1f1243539ed4d7a98e71dcc2ed56b017e40
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
When a markdown document contains a "naked" URL, or an angle-bracketed
<URL>, md4c recognizes it, and we set the AnchorHref charfmt property.
There's no need to expand it into the [text](url) form if the text is
the same as the url, there is no tooltip, and the url is valid.
QTextMarkdownWriter now writes a CommonMark "autolink" in that case:
https://spec.commonmark.org/0.30/#autolinks
[ChangeLog][QtGui][Text] QTextMarkdownWriter now writes an autolink
whenever a hyperlink has no custom text and no tooltip, including
when the document was parsed from Markdown containing a naked URL.
Pick-to: 6.4
Fixes: QTBUG-94713
Change-Id: I432db8499c62e1e0b1e913bfd8ef2147e3c2bb2a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Work around https://gitlab.freedesktop.org/mesa/mesa/-/issues/5875 by
treating the driver as broken when both the driver and device UUIDs
are all zeroes.
Fixes: QTBUG-104231
Pick-to: 6.4 6.3 6.2
Change-Id: Ibf7973361d472ebb1cb433bc61b50b2828f75c6b
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Found by codespell
Pick-to: 6.4
Change-Id: Ie3e301a23830c773a2e9aff487c702a223d246eb
Reviewed-by: Nicholas Bennett <nicholas.bennett@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
More specifically, if either minimum or maximum size are updated, make
sure that the current window geometry is updated so that it is within
the minimum and maximum sizes.
Previously, these constraints was only respected by the window manager
when the user resized the window.
For widgets this already worked, because a top-level widget will take
care of respecting these constraints if they are changed.
Since QWindow::setMinimumSize and QWindow::setMaximumSize started to
share so many common things, a new function (setMinOrMaxSize_helper())
is added.
Task-number: QTBUG-102771
Change-Id: Ia4b2680dcf865f84a3cf6424187f9a6036b76386
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If we replace the bullet character with a UC checkbox character, it
looks ok in a browser, and the HTML parser can recover the BlockMarker
attribute from the css class.
[ChangeLog][QtGui][Text] Checkbox list items can now be read and written
in both HTML and Markdown, including conversions.
Task-number: QTBUG-103714
Change-Id: Ic6b74512075cd4ac16d6f80fdf55b221447491a9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Avoid a full data detach when only metadata changes. This paradigm was
already used one place, and made generic.
Fixes: QTBUG-81674
Change-Id: I605253babc6ad9fc130e19e8cef3812690933ac5
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Add test of explicitly prepared qcolortransform, this is a state
a transform can get into if used for an image transform.
Also cleans up the test code.
Change-Id: I9445ed114bed0edc790e14024aaae6a42989220b
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This allows to set up everything first - without paying for the layout
calculation at every step - and only then trigger the layout once.
Results:
0.065 msecs to create a QGraphicsTextItem with some text (layouted)
0.036 msecs to set everything up in a QGraphicsTextItem with 0 width
Change-Id: I138bd1d58941d029bc0a36d2730216778f1fbd97
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Before it was only tested indirectly as part of the qcolorspace
tests. This also fixes a rounding for maximum RGB64 values.
Pick-to: 6.3
Change-Id: I6106e662c0f9d00c0b3a0c13213cb051ea39e14e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The issue is that when someone is trying to use the following code:
QKeySequence keySequence(Qt::Key_Shift);
qDebug() << keySequence.toString();
This will print seemingly gibberish output. It is unicode in practice. For
Qt::Key_Shift, this would be: "�_@\uDC20"
The reason why this is happening is because we have platform-specific ways to
handle this due to Mac glyphs which are not available on Linux or Windows. This
works fine on Mac.
But for the Linux and Windows codepaths, there is not really any mapping like
for other keys. It seems that modifiers were left out.
The solution is to simply amend the list of mapping from these modifier key
codes to raw strings for Linux and Windows like it is done for other key codes.
So, now, modifiers will also be included in the list.
So, the expected output will be generated for the above code, as: "Shift".
[ChangeLog][QtGui][QKeySequence] Added missing modifier names
Fixes: QTBUG-69715
Fixes: QTBUG-40030
Change-Id: I460d54bc8e593b350ff95894f23c5b4a7c819a44
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We should prefer to test this unless we know it won't work, but this is
very hardware and implementation-dependent anyway. So I declare that
we'll only guarantee FP exception cleanliness on a best-effort basis for
a few platforms.
The notable difference in this commit is the removal of QNX. I don't
know why it began producing an FP exception with one of my changes, but
since the toolchain isn't public, I can't debug and will not devote any
time to figuring it out. If users of QNX require this, then someone with
interest in that OS will need to spend time after my changes integrate.
Change-Id: Ibcde9b9795ad42ac9978fffd16f1cb9c03a0ff66
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
When XCB_INPUT_TOUCH_BEGIN closes a popup, we then receive
XCB_INPUT_TOUCH_END, and cannot find a target window (because it's
destroyed). If we don't deliver it, we need to at least clear the
stored point from QPointingDevicePrivate::activePoints. Then when
we deliver the next touch press, m_fakeMouseSourcePointId also
needs to be reset.
It's now even more paramount that autotests (and real-world
touchscreens) must never omit any active touchpoint from a touch event.
If a point doesn't move, it must be included in the QTouchEvent, with
Stationary state. If not, QGuiApp::processTouchEvent() could generate
multiple TouchBegin events in a row, which gets other bits of logic
confused, here and there.
Fixes: QTBUG-94557
Fixes: QTBUG-98519
Fixes: QTBUG-102751
Fixes: QTBUG-103706
Pick-to: 6.2 6.3 5.15
Change-Id: Ia95e410a2bb8bc7784aa5d296fac2b89e53a9f55
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This caused unnecessary empty <pre> blocks when converting markdown to
HTML, made code blocks too large using QSyntaxHighlighter to highlight
the whole block, and caused assymmetry when rewriting markdown.
Pick-to: 6.3
Fixes: QTBUG-101031
Change-Id: I08016577ccb92edb4afae31d7df3259cb011d5c8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The HTML parser calls QTextBlockFormat::setNonBreakableLines(true) when
it sees a <pre> tag; so for symmetry, the markdown reader now does the
same when it sees a fenced code block, and the markdown writer honors
the nonBreakableLines property by writing a fenced code block. This
preserves the meaning better when reading HTML and writing markdown or
vice-versa, without modifying HTML reading or writing code.
Added a test tst_QTextMarkdownImporter::fencedCodeBlocks() which
unfortunately also highlights a known bug in the markdown reader: each
fenced code block ends with an extra empty block. That can be fixed
separately.
tst_QTextMarkdownWriter::fromHtml(preformats with embedded backticks)
that we re-enabled in 1abaf9d5d6 was not a
very useful test: ``` with a space and some words but no newline is not
a fence: it's just like a `monospace` span. We have had trouble with
those in CI because of missing monospace fonts, or inconsistency when
a supposedly mono font's QFontInfo::fixedPitch() returns false.
So just test proper <pre>/fence conversion for now.
Pick-to: 6.3
Fixes: QTBUG-100515
Fixes: QTBUG-100981
Task-number: QTBUG-101031
Change-Id: I88f0ede0810d8a9480b30eb0cd780e1af67cc5f2
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
On QNX in CI we see
system fonts: fixed: monospace 9; general: Sans Serif 9
and "monospace" isn't really a fixed pitch font.
On B2Qt arm7 in CI we see
system fonts: fixed: monospace 9; general Sans Serif 9
and Sans Serif is actually fixed pitch.
So these tests can go wrong both ways; we need to skip them whenever
the fonts would lead QTextMarkdownWriter astray.
Pick-to: 6.3 6.2
Task-number: QTBUG-89819
Task-number: QTBUG-99676
Task-number: QTBUG-100515
Task-number: QTBUG-103484
Change-Id: I7b9adca967eaf9b8d33d1e03ef2627f70f375196
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This patch enables usage of QAbstractItemModelTester on
QFileSystemModel. QAbstractItemModelTester called fetchMore()
on all items. QFileSystemModel represents the whole file system.
This led to very long test runs. To avoid this, this patch
introduces a new feature in QAbstractItemModelTester, namely
to disable calling of fetchMore().
Change-Id: Ie5d2e22fa4c143be7c080d9f79632cd2cbe07aac
Reviewed-by: David Faure <david.faure@kdab.com>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Also add the beginnings of an autotest for QTextCursor::insertHtml(),
for comparison purposes.
We can see that the block to be inserted is merged with an existing
block by default rather than being inserted as a new one, with both HTML and
Markdown insertions. So now we test for leading and trailing newlines
in the markdown to be inserted, to determine whether we need a new block
into which to insert, and to "hit enter" at the end of the insertion.
QSKIP the toMarkdown() comparisons if GeneralFont is mono. This happens
on Boot2Qt systems in CI.
Task-number: QTBUG-76105
Task-number: QTBUG-94462
Task-number: QTBUG-100515
Task-number: QTBUG-103484
Change-Id: I51a05c6a7cd0be4f2817f4a922f45fa663982293
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This allows color space conversions that produces values outside the
0.0->1.0 range, which is one of the intended functions of the floating
point image formats.
Change-Id: I63b37b0f6934d4382edafb4709486c785a637c67
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This was forgotten when implementing QTBUG-73160, but suggested in
passing in QTBUG-64.
[ChangeLog][QtGui][QPolygon] Added toPolygonF().
Task-number: QTBUG-73160
Task-number: QTBUG-64
Change-Id: I9b33cf47a0d432aa842ab0f8337001c66e4ca41c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
If all the palette's colors are resolved, nothing needs to be done in
QPalette::resolve(const QPalette &other).
Change-Id: I1573cfa5b5cd1e7eb15f3242aff6ab92e9f8c84b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
swapchain->currentFrameRenderTarget()->renderPassDescriptor() is not
functional at the moment, it returns null. This is because no backend
ensures that the internal renderpass descriptor object is exposed via
that getter in a QRhiSwapChainRenderTarget. Whereas in a
QRhiTextureRenderTarget this would work by design because there the
setter must be called by the user.
Fix this up, providing better API symmetry, and also reducing the need
to pass along QRhiRenderPassDescriptor objects seprately alongside a
QRhiRenderTarget in some places, e.g. in Qt Quick.
Change-Id: I42c4e9aaee3202c1d23bd093d840af80c5f8cd0f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
It's one thing that this is not part of OpenGL ES, but it is optional
even with Vulkan, with some mobile GPUs not offering the feature at all.
Change-Id: I4e2c6642eccb0793e69074b4b6eeb2b7cef3516e
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
A previous commit Q_CORE_EXPORTed this class so it could be used in
tst_qevent. But we can also keep it Q_AUTOTEST_EXPORTed and make the
testing of the class subject to QT_BUILD_INTERNAL on the test side.
That's what this patch does.
Change-Id: I9bd5f80ada856b7db4b39dfb59b32bd825416c13
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
There's no advantage to them being inline: Absent de-virtualisation,
clone() is only supposed to be called through the vtable, and the copy
ctor is only supposed to be used in the implementation of clone().
And when the compiler de-virtualises, we don't want the code
duplication associated with inlining.
Enforce this by introducing new macros to hide the boilerplate.
This fixes missing out-of-line dtors in:
- QSinglePointEvent
- QApplicationStateChangeEvent
- QFutureCallOutEvent
Wrong covariant return in:
- QFutureCallOutEvent
And missing clone() reimplementations in:
- QCloseEvent
- QIconDragEvent
- QShowEvent
- QHideEvent
- QDragEnterEvent
- QDragLeaveEvent
While these don't carry extra data or members, a dynamic_cast of the
result of clone() as well as using the expected covariant return value
would fail:
QShowEvent *e = ~~~;
QShowEvent *e2 = e->clone(); // ERROR: converting QEvent* to QShowEvent*
Check that reimplementing clone() is binary compatible (covariant
returns may change the numerical pointer value returned, cf.
https://community.kde.org/Policies/Binary_Compatibility_Issues_With_C%2B%2B).
The copy-assignment operator stays inline for the time being, as the
goal is to = delete it in the future.
This patch covers, roughly, QtCore and QtGui.
[ChangeLog][QtGui][QEvent subclasses] Fixed missing clone()
reimplementations on QCloseEvent, QIconDragEvent, QShowEvent,
QHideEvent, QDragEnterEvent, and QDragLeaveEvent.
Task-number: QTBUG-45582
Task-number: QTBUG-97601
Change-Id: Ib8a0519dbe85a7a8da61050d48be338004dfa69a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We want to enable gaining access to the underlying resource(s) by
inspecting a QRhiRenderTarget. This is not currently possible for
swapchains since there is nothing that references the actual
QRhiSwapChain. To clean this up, make an explicit, new
QRhiSwapChainRenderTarget subclass. Thus the logic already used in a
couple of places to examine the resources attached to a
QRhiTextureRenderTarget can now work with swapchain render targets too,
by branching based on the resourceType().
This eliminates the somewhat odd setup where a "RenderTarget" resource
is QRhiRenderTarget corresponding (but not exposing!) a swapchain,
whereas a "TextureRenderTarget" is a QRhiTextureRenderTarget which
is a subclass of QRhiRenderTarget. Now we correctly have an (abstract)
base and two subclasses, one for each type of render targets.
Besides, it allows us to clean up the oddly named
Q...ReferenceRenderTarget classes in the backends, which initially tried
to indicate that this "render target" merely references (or, in
practice, is) a swapchain. We can now have a nice and symmetrical
Q...SwapChainRenderTarget and Q...TextureRenderTarget naming scheme.
Change-Id: Ib07e9be99a316eec67b94de0860e08f5f4638959
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
QNX tests are run under QEMU so have the same problem as Ubuntu.
Pick-to: 6.2 6.3
Task-number: QTBUG-100928
Change-Id: Id7c7639b743062c777502e2ba8b28f9bb18deb19
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Two things are done here:
- use showNormal() instead of show() to get an expected widget size.
- skip the test if HighDPI scaling is enabled with non-integer scaling
factor, because there can be rounding errors.
Fixes: QTBUG-87390
Pick-to: 6.3 6.2
Change-Id: I653a17bac2142838b03a328e1629582384b6c7b3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The test will never pass on Android because it's missing permissions
to read root filesystem.
Skip the test instead of blacklisting it.
Fixes: QTBUG-87427
Pick-to: 6.3 6.2
Change-Id: Ib57a49b1d2bc4204f8aa2c3028c7220d23ff2a91
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Only (straightforwardly) implementable with modern APIs, and
only really exists to handle special platform cases, such as
when a video framework gives us a D3D texture array with
D3D11_BIND_DECODER | D3D11_BIND_SHADER_RESOURCE
which is only possible to use as a shader resource if the SRV
selects a single array layer.
Has no effect on the normal usage of texture arrays, where all
array layers are exposed, and it is the shader that selects the
layer when sampling or loading via the sampler2DArray. That
continues to be the standard way to work with texture arrays.
Change-Id: I0a656b605da21f50239b38abb83067e0208c1dbe
Reviewed-by: Piotr Srebrny <piotr.srebrny@qt.io>
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
This test doesn't fail on Android anymore, so don't use QEXPECT_FAIL.
Pick-to: 6.2 6.3
Task-number: QTBUG-100470
Fixes: QTBUG-69242
Change-Id: I5a96566728a486c701656aede1818e7ab7f019be
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Don't use deprecated methods in tests, and don't refer to them in
documentation.
Change-Id: I110480742d9a7b9b0a2e194e3fe610208c1e07da
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Parent window in sizeLessWindow test was using software pipeline at
least on webOS, causing a QCRITICAL() exit when the test was executed.
Fixes: QTBUG-101869
Pick-to: 6.3
Change-Id: Ie8cc0ea0b6a09729475389be44197e01a45b217f
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
On Wayland, there is no protocol to do it yet.
Task-number: QTBUG-100792
Task-number: QTBUG-101145
Change-Id: Id72625a8161359111a2d0f43f3215e787778ba6b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
[ChangeLog][QtGui][QColor] The constructors from string-ish type, as
well as the setNamedColor() and isValidColor() functions, have been
deprecated effective Qt 6.6 in favor of fromString() and
isValidColorName(), resp.
Fixes: QTBUG-101389
Change-Id: I002646bd48c1e4340dc6842fd136fc9f35bb9b61
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
for QInputDevice::primaryKeyboard() and
QPointingDevice::primaryPointingDevice().
This also reverts ae9fefe3c8.
Fixes: QTBUG-100790
Pick-to: 6.3
Change-Id: Id02f277db25f823eb29e939e25801325df8e4076
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
And remove their uses.
[ChangeLog][QtCore][Deprecation Notice] Deprecated QString::count()
and QByteArray::count() that take no parameters, to avoid confusion
with the algorithm overloads of the same name. They can be replaced
by size() or length() methods.
Change-Id: I6541e3235ab58cf750d89568d66d3b1d9bbd4a04
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is customary for Qt types that can be constructed from string-ish
to provide a fromString() named constructor. QColor didn't, relying
instead on a set of overloaded implicit and explicit constructors.
Add the named constructor, with the intent to deprecate the string-ish
QColor constructors after a grace period.
To prevent new users from using known-to-become-deprecated API, mark
the old functions as \obsolete.
Also rename isValidColor() to isValidColorName(). The only reason why
these are lumped together in single commit is so that their docs can
refer to each other instead of having to temporarily refer to obsolete
API.
[ChangeLog][QtGui][QColor] Added fromString() and isValidColorName(),
both taking QAnyStringView.
Task-number: QTBUG-101389
Change-Id: I2857c728257ad2f14c7c968b45547bdf07c44b63
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
on Wayland
Task-number: QTBUG-100917
Pick-to: 6.3 6.2
Change-Id: I66c42bb0ceca83fd0531159c606d22c58b18b371
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In QPainter, clipping can only be done on whole pixels. The various
ways of specifying a clipping rectangle to the QPainter API have been
inconsistent in how fractional rectangles (either specified directly,
or as a result of fractional scaling) are mapped (rounded) to integer
coordinates.
Also, the mappings have not made sure to keep the edge-to-edge
property of clip rects under scaling. This is particularly important
when scaling QRegions with multiple rects, as QRegion is designed on
the assumption that an area can be described as a set of edge-to-edge
rects.
The fix rounds a clip rect identically with a fill rect. (Indeed, a
followup plan would be to merge QRasterPaintEngine's
toNormalizedFillRect() with the rectangle rounding function in this
commit).
Notably, a QRectF clip is now interpreted the same as a QPainterPath
clip describing the same area.
This modifies d9cc149995
Task-number: QTBUG-100329
Fixes: QTBUG-95957
Task-number: QTBUG-100343
Pick-to: 6.3
Change-Id: Iaae6464b9b17f8bf3adc69007f6ef8d623bf2c80
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QNX tests are run under QEMU so have the same problem as b2qt
Pick-to: 6.2 6.3
Task-number: QTBUG-100948
Change-Id: I2abc8a4bca9e8ba414197721301d493296e7ce0b
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The stored layout direction used to get changed during initialization
to what was auto-detected based on the translation. Changing the
translation then overwrote that stored value, even if an explicit call
to setLayoutDirection was made by the application.
Calling QGuiApplication::setLayoutDirection(Auto) has so far been a
no-op.
Change this logic so that the stored layout direction continues to be
LayoutDirectionAuto also if it's set based on auto-detection, and only
overwrite it when explicitly called with a non-Auto value. This way,
applications can set a layout direction that stays unchanged even when
translators are installed.
Add test coverage that uses a QTranslator.
In practice, this is not a change of behavior, unless applications called
setLayoutDirection(Auto) (which is no longer a no-op), or called
setLayoutDirection() and then installed a translator and expected the
translator's layout direction to come into effect in spite of the explicit
setting.
[ChangeLog][Gui][QGuiApplication] Calling setLayoutDirection with a non-
auto value now disables the auto-detection based on installed
translators. Applications that explicitly set a layout direction and also
want translators installed afterwards to take effect should reset the
layout direction to Auto, which is now no longer a no-op.
Fixes: QTBUG-100632
Pick-to: 6.3
Change-Id: I1fdcebd43a9b1b468ff95bf15f53f441bb214e08
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The test is not only flaky on Windows 10 but also on Windows 11.
Pick-to: 6.2 6.3
Task-number: QTBUG-100412
Change-Id: I27e8179dafd4743c3eaf2c0dd8b70b804612c7c2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
tst_qtextdocument was disabled because it crashed.
It does not any more.
Task-number: QTBUG-87671
Pick-to: 6.2 6.3
Change-Id: Ie1bd75c21e481c2ecb8607c04ce9370fc6d7b00e
Reviewed-by: Samuel Mira <samuel.mira@qt.io>
Reviewed-by: Pekka Gehör <pekka.gehor@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The hugeQImage test loads, as its name suggests, a huge image.
At 2.5 GiB it's too big for the hard-coded 1 GiB limit on RAM
that the QNX toolchain hard-codes when it's started in QEMU.
Pick-to: 6.2 6.3
Task-number: QTBUG-100929
Change-Id: I8e8caaff7fd1dd0e648ada5df613c793f72bcf5d
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
