The qt_findAtNxFile helper in qicon.cpp expects a local file name that
can be probed with QFile::exists. If the src attribute of an <img>
element specifies the location of the image as a file:/ or qrc:/ url
rather than as a local file name, then we need to strip the scheme
off the file path, and in the case of a qrc URL leave the :/ prefix
before calling the qt_findAtNxFile helper.
Amends, and partially reverts, 760df72565.
We can't avoid testing whether the source in the HTML is provided as a
URL before interpreting it as a file name.
Pick-to: 6.5 6.4 6.2
Fixes: QTBUG-109212
Change-Id: I7ea7a5bfde79bab90a8025c42e754129813dd0fc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If an image source in HTML is specified via local file name or resource
path (i.e. without qrc prefix), then the correct image is loaded.
With file:/ or qrc:/ schema however, the image is either not loaded at
all, or the 2x image is not loaded. The qt_findAtNxFile helper in
qicon.cpp gets a URL path, but expects a file path (that can be tested
with QFile::exists).
Task-number: QTBUG-109212
Pick-to: 6.5 6.4 6.2
Change-Id: Ibcf687c69b3e53a10f21d718d28c8177a02d6be6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Amends 52ce0c177e, which added the test
without adding it to the parent directory.
Refactor the test code to be data driven, add the image files as
external test data files, and adjust the test code to find the files.
Use the QTextImageFormat from the document rather than a manually
crafted one, as otherwise we don't test a real usecase.
This also makes the test more flexible for adding qrc, resources, and
file URLs.
Task-number: QTBUG-109212
Pick-to: 6.5 6.4 6.2
Change-Id: Id0771037b961d95ec3cadd0cd6467d2448f22884
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
Relevant mainly if we want to consistently expose these as the
theoretically correct uint32_t/quint32 from Qt Quick's
QSGRendererInterface. (not that int is not sufficient for
indexing the typical 3-4 families and 2-16 queues per family)
Some checks are not actually needed since the family index
must always be valid after create().
Pick-to: 6.5
Task-number: QTBUG-108895
Change-Id: I474ccea51a81e7a096281604ff79b7db4cdd2484
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Fixes issues with readback of storage buffers modified on GPU for D3D
and Metal. Adds unit test for storage buffer readback.
D3D
* Fixes issue where QRhiBufferReadbackResult::completed callback could
be called twice on buffer readback completion.
Metal
* Fixes issue where buffer readback occurred prior to command buffer
being committed.
Change-Id: If55ac005f4438d66d2f65ea2e1ee0d5686c884ff
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The object replacement character (U+FFFC) is used to represent
inline objects such as images in rich-text. To enable this,
we have special handling of it in QTextEngine. For classes
where inline images are not supported, it will just be hidden
from the visual text, which is unexpected.
Instead of always special-casing it, we make this dependent
on whether the document layout has registered any object handlers.
If they have not, then there will be no visual representation of
the object, and it is better to show the glyph for it.
For anything based on QTextDocument, there will always be the
image handler, so U+FFFC will still have special handling there,
but for non-rich labels and plain text editors the glyph will
be shown instead.
Note that there was also a bug in QLineEdit, where the object
replacement character was always replaced by a space. This was
introduced in 2007, in a patch which replaced a !ch.isPrint()
with a check for "the most obvious non-printable characters"
to reduce the number of characters that were not shown. However,
U+FFFC is a printable character and would thus not have been
filtered by the !isPrint() condition, so I think this was a
mistake at the time. However, due to the special-casing of
the character in Qt, it would not have had any effect until
now.
This also changes the QTextLayout::cursorToXForInlineObject()
test to actually test proper inline objects, as this was
previously using a hack which depended on the inline object
code to be used even for plain QTextLayouts with no handlers
for these.
[ChangeLog][Text] The object replacement character (U+FFFC)
is now only filtered out in rich text controls, where they
represent inline objects. In other controls, its glyphs will
be shown as with other text.
Pick-to: 6.5
Fixes: QTBUG-101526
Change-Id: I7fcaf2b10918feb41589e1098016efbf79a0e62d
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Variant-selectors are special unicode symbols which are used to
modify glyph selection for the preceding character. For instance,
a regular symbol could be turned into a color emoji using VS16,
the emoji variation selector. In order for this to work, however,
the font that handles the selector has to handle the full pair of
characters, so that it can apply the correct substitution rules.
One specific example of this was on macOS, where an airplane
symbol + VS16 would match the symbol to the default UI font but
the VS16 to the emoji font. Since there string provided for the
emoji font did not have any preceding character for VS16, we just
ignored it.
To improve on this, we now detect variation selectors that have
been matched to different font engines than the preceding
character. When such a case occurs, we check if the selector font
also supports the preceding character, and if it does, we keep
the pair together and use the same font for both.
[ChangeLog][QtGui][Text] Fix some cases where a variation-selector
character would be ignored in font selection and the correct
variant of a character would thus not be selected.
Task-number: QTBUG-108799
Change-Id: I9f427e0520e652ee2f24a4f7dc3c1957251e06bd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add storage buffer memory qualifier and run time array stride information
to QShaderDescription::StorageBlock.
Memory qualifiers allow more informed selection of RHI resource buffer
binding (bufferLoad / bufferStore / bufferLoadStore) function.
Run time array stride (for last block member unsized array) allows
packing of buffer data for transfer to / from GPU. Without this
information, applications must infer or guess which packing rules
(std430 / std140) are in use.
Change-Id: I676d7e848afefd40d01cdd463c569b07022b683e
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Input events that originate from actual device interaction should reflect the
device's state, and device and events need to be kept in sync so that event
sequences (such as multi-touch events, where we have begin/update/end cycles
spanning multiple events) are working correctly.
For that reason, the event point data in pointer events is explicitly shared,
and we only detach in exceptional situations. This saves us memory allocations,
and makes sure that the event point data carried by events, and the event point
data stored persistently in the device, are kept in sync.
Cloned pointer events do not originate from device interactions, and should
therefore not sync back to the device. E.g. accepting a clone should not modify
the original event data stored in the device. There are exceptions here as
well, e.g. when cloning an event in Qt in order to deliver a translated version
of it to a different scene. Different points might even get delivered to
different scenes or windows, or at least different items in the same scene. For
that reason, we explicitly detach, and then explicitly write back the relevant
states after the cloned event has been delivered.
But in general, we should assume that cloned events do not write back to the
device. Since QEventPoint is an explicitly shared data type that never detaches
itself, we have to explicitly detach it when making copies that should not be
shared.
The ideal implementation of this would be to do the detach in the copy
constructor of QPointerEvent, which is called when cloning. However, Qt itself
makes copies of QPointerEvent without using clone, e.g. when assembling lists
of touch events for the different subscenes or windows in
QGuiApplicationPrivate::processTouchEvent, where event objects are added to a
QVarLengthArray<QMutableTouchEvent>. This makes copies, and those copies must
not detach.
So we have to implement the special cloning behavior in each override of
QPointerEvent::clone(). For this, introduce a dedicated macro for the common
member functions. This macro must be used for QPointerEvent subclasses.
Fixes: QTBUG-107560
Change-Id: I4b56f9e71c7d067ba9054a2a631e8ba5bc7b1ab9
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This amends fccd419dd6.
If Harfbuzz failed on one of the items in a string and returned
zero glyphs, then we would exit the shaping loop. The mentioned
change fixed a crash related to this when the ignored character
was the only character in the string, but it occurred in a
subitem of a longer string, then we would return and fail to
lay out the rest of the string.
This popped up recently because an update to Harfbuzz has caused
it to return zero glyphs when applying the Apple emoji font to
an isolated variant character (see bug report). When we matched
the symbol to the main font and only the variant character to
the emoji font, we would get in this situation, and end up
exiting the shaping early.
[ChangeLog][QtGui][Text] Fixed a regression which would
sometimes cause text to disappear if the string contained
an unmatched variation selector character.
Pick-to: 6.4
Fixes: QTBUG-108799
Change-Id: I616ab1b2d33c2df731419c5ce06fbc578a625a32
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When Harfbuzz returns zero glyphs, this will typically be because
the character is ignored. We currently have no way to differentiate
this from actual error cases, so to avoid return the error glyph
for cases which are not really errors, we set the dontPrint flag
for this.
When we add a way to differentiate between error cases and non-error
cases later, we should revert this for the actual errors.
Pick-to: 6.4
Task-number: QTBUG-108799
Change-Id: I2a910d951b71c705fb4dd761fcfe3a942b3afa7c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
After 109e088c7c, cache keys were unique
for palettes with different private or data instances, but the key did
not change when a palette without any shared copies was modified, as
that does not create new private data structures.
To fix this, always increase the counter for the private data structure,
also when not detaching from shared copies.
Augment test case with scenario that broke.
Pick-to: 6.4
Fixes: QTBUG-108709
Change-Id: I606abfb8b1a03e515e46b10dc840a631eb31d496
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: JiDe Zhang <zhangjide@uniontech.com>
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
This is improved version of previous fix
013c346a8d that was reverted because it
broke some tests for Quick Text. The problem was that it did not work
correctly in the case the text was wrapped to a fixed width.
To deal with this we'll accumulate current line full width (as if it
hadn't been wrapped) in layout data (layoutData->currentMaxWidth).
Then when the next line is explicitly wrapped by line or paragraph
separator, this accumulated width will be used to adjust layout's
maximum width.
Change-Id: Iad7119d9808e1db15fe1fbc5db049c3db928529f
Fixes: QTBUG-89557
Fixes: QTBUG-104986
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
In Qt 5, QWin(dows)Mime and QMacMime lived in the respective Extras
modules, which were removed and partially folded into the relevant
modules in Qt. QWindowsMime and QMacMime continued to provide the
abstraction for implementing built-in support for native clipboard
formats and UTIs within Qt, but only as private APIs.
After the recent clean up of those APIs and respective infrastructure,
we can now bring them back as public converter interfaces. Application
developers can subclass those and instantiate an instance of their
implementation to add support for platform or application specific
data formats.
These interfaces are not in the QNativeInterface namespace, as
applications don't call into Windows or macOS using those interfaces.
I.e. there is no class on which an application would call
auto *converter= nativeInterface<QWindowsMimeConverter>();
Also, since applications override those converter types, we do want to
guarantee binary and source compatibility.
[ChangeLog][QtGui][QWindowsMimeConverter] Reintroduced to allow
applications to add support for conversion from and to Windows-native
clipboard formats to MIME-encoded data.
[ChangeLog][QtGui][QUtiMimeConverter] Reintroduced to allow
applications to add support for conversion from and to clipboard data on
macOS and iOS to MIME-encoded data.
Fixes: QTBUG-93632
Change-Id: Iebd909c3970015d203f59d5ab15e306b3d312f6e
Reviewed-by: Yuhang Zhao <2546789017@qq.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Support for 1D textures on Vulkan, OpenGL, Metal, and D3D.
Change-Id: Ie74ec103da9cfcbf83fa78588cf8cfc1bd6e104f
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Skip on crashing tst_qvulkan test
Blacklisted completer_data on qfiledialog
(8d76c5af51 should have been enough but
it is still failing)
Task-number: QTBUG-108328
Task-number: QTBUG-108329
Change-Id: Iad5573af60cca16d16ba0462293e276186e25653
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Upon programmatic window state changes, windowStateChange was fired
once in QWindow::setWindowStates and once when the visual state had
been changed by the window interface.
This patch adds if guards to ensure that the singal is fired only once.
It adds a corresponding autotest to tst_QWindow.
tst_QWidget::resizePropagation() is adapted to no longer expect double
signal emission.
Fixes: QTBUG-102478
Pick-to: 6.4 6.2
Change-Id: If093c0a883d76d8a676e4fab90db6b0676452267
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When comparing a glyphIndex with a hard coded number, the number is
cast to an int, whereas the glyphIndex is an unsigned int.
That causes a compiler warning.
This patch forces the numbers to be cast to an unsigned int.
Change-Id: I8a31124c6afacfc4ecfb13caf2cb8133dad44a21
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Debug serials and detatch numbers of deep and shallow detatch in test
function cacheKey, if it fails.
That implicitly removes a compiler warning about these variables being
unused.
Change-Id: I481f4b63e3ed0d50fb442dffc658b97d913059bc
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This is a semantic patch using ClangTidyTransformator as in
qtbase/df9d882d41b741fef7c5beeddb0abe9d904443d8, but extended to
handle typedefs and accesses through pointers, too:
const std::string o = "object";
auto hasTypeIgnoringPointer = [](auto type) { return anyOf(hasType(type), hasType(pointsTo(type))); };
auto derivedFromAnyOfClasses = [&](ArrayRef<StringRef> classes) {
auto exprOfDeclaredType = [&](auto decl) {
return expr(hasTypeIgnoringPointer(hasUnqualifiedDesugaredType(recordType(hasDeclaration(decl))))).bind(o);
};
return exprOfDeclaredType(cxxRecordDecl(isSameOrDerivedFrom(hasAnyName(classes))));
};
auto renameMethod = [&] (ArrayRef<StringRef> classes,
StringRef from, StringRef to) {
return makeRule(cxxMemberCallExpr(on(derivedFromAnyOfClasses(classes)),
callee(cxxMethodDecl(hasName(from), parameterCountIs(0)))),
changeTo(cat(access(o, cat(to)), "()")),
cat("use '", to, "' instead of '", from, "'"));
};
renameMethod(<classes>, "count", "size");
renameMethod(<classes>, "length", "size");
except that the on() matcher has been replaced by one that doesn't
ignoreParens().
a.k.a qt-port-to-std-compatible-api V5 with config Scope: 'Container'.
Added two NOLINTNEXTLINEs in tst_qbitarray and tst_qcontiguouscache,
to avoid porting calls that explicitly test count().
Change-Id: Icfb8808c2ff4a30187e9935a51cad26987451c22
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Two rows shared the same name. They claimed the value used was out of
range, but actually that was only true for one of them. The other was
in range, but the test reduced the number of digits allowed after the
decimal point, thereby making it invalid, so rename that one to
reflect this.
Change-Id: I0936ea25ec799c0069cd148b9f9bae5d35906093
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Include the spacings used, to avoid a naming collision.
Change-Id: Iaf78f7142f6780dcf4c7a0b973db9f625af06767
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Avoid duplication by distinguishing similar test-cases.
Change-Id: I1a100d6c9729f0ea356f177535d15c3d36e2da9e
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The test used to trigger a lot of QWARN messages; these are clearly
intended, so tell QTest to expect them, so that we get an error here
if those warnings ever don't show up.
Incidentally tidy up a comment and convert a != verify to a
QCOMPARE_NE(), since it's now available to do that job.
Change-Id: I83e225c37abe8446dac06ebe4e75258cb87b71b0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
In the process, clean up the building of the data tags: use a
range-for loop, albeit we do need an index to show in tags; show it
and the angle in the tags using addRow()'s easier formatting. Change
the low angle tests to show the sign of the angle (which is how they
differ)rather than just labeling them 1 and 2.
Change-Id: Ib5aaa3e22d771c530c9343ba368b0fdfceb264ce
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
The last three duplicated earlier ones; and their names didn't take
into account the circle that had been added to the path since those
tests. So revise their names to reflect that.
Change-Id: I32d74f21947b4ba0c04eee53daf8efde6b4a6409
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Two rows shared a data tag. Prefixed one of them with the color of the
half-transparent image it involves (the other's is fully transparent).
Change-Id: I1bd174008ed29bcf2f460e683fdf6d1f12ba19d0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The same data tags were used with two distinct filenames in their
data. Include the basename of each filename in the data tag, to avoid
duplication.
Change-Id: I216fecbd413fab409227ad6f93f8ac3fcc74b059
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The "a" and "A" rows appeared under Valid, then again under Only Keys.
The two copies were identical, in each case, so drop the latter.
Change-Id: Ib3d84710e772171bb4a5e0aefd20022810fb41cd
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
In Qt 6, after changes such as 121fddcf5a,
we go through the QPA layer to close widget windows properly. Closing
and hiding of windows is now done in when we receive and handle the
window system's CloseEvent.
Such an event to a modally blocked window should be blocked, so that
users can't close a modally blocked window. However, if the event is the
result of a call to QWindow::close, then it should not be blocked.
Luckily, we know that the event is the result of such a call, so let
such events through. This restores compatibility with Qt 5, where it was
possible to first open a new dialog, and then close the previous dialog.
Add a test case.
Fixes: QTBUG-107188
Pick-to: 6.4 6.2
Change-Id: Id812c1fc36aa0e1a10dfb8d3a16a11d387289b05
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
We've been requiring C++17 since Qt 6.0, and our qAsConst use finally
starts to bother us (QTBUG-99313), so time to port away from it
now.
Since qAsConst has exactly the same semantics as std::as_const (down
to rvalue treatment, constexpr'ness and noexcept'ness), there's really
nothing more to it than a global search-and-replace, with manual
unstaging of the actual definition and documentation in dist/,
src/corelib/doc/ and src/corelib/global/.
Task-number: QTBUG-99313
Change-Id: I4c7114444a325ad4e62d0fcbfd347d2bbfb21541
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Having the same test tag for two rows of a data table makes the report
less useful. We also intend to forbid doing that.
Change-Id: I67ec32514b6550f4f97610a2140f1383d0d85b23
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When laying out a text and calculating maxWidth, we must _always_ take
into account the accumulated width of spaces (lbh.spaceData.textWidth)
regardless of wrapMode, other text content, spaces position, etc.
Fixes: QTBUG-106947
Change-Id: I2ac9af92ed7dd07c1e040bfcf83949a358d1c9c9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
After 1d961491d8, palettes are different
if they either have different brush data, or a different private. Two
privates can share data, but still must generate different cache keys.
The cacheKey has so far been composted of the serial number of the Data
struct, and a detach number that is incremented when we detach the
private.
This failed for two reasons:
- the implicit copy constructor of the Data class copied the serial
number, when it should have incremented it. Fix that by member-
initializing the serial number rather than doing it only in the default
constructor. The member initialization is also executed for the copy
constructor.
- the detach_no logic as it was implemented does not guarantee that two
copies of the same palette that share data, but have different resolve
masks (and thus different privates) have different detach_no values.
Use a static serial counter for that number as well.
Amend the test case to verfiy that cache keys, and the elements of the
cache keys, change when they are expected to.
Fixes: QTBUG-106984
Pick-to: 6.2 6.4
Change-Id: I84d7055ce8bfe0d42f1f8e9766f3f1ad610f4ec8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This introduces a way to trace each entry in the glyph index
array to a specific index in the original text passed to
QTextLayout, as well as a convenience function to access
the original string from the QGlyphRun.
The index information is stored in the logClusters array internally
in Qt, but it contains the inverse information: For each
character in the output string, it contains an index into the
glyph array. In order to get the string indexes for each glyph,
which makes a lot more sense in the context of the QGlyphRun
API, we need to do a little search to construct the data.
To avoid adding unnecessary allocations, we make the new APIs
opt-in. If you do not specify anything, you will only get the
glyph indexes and glyph positions as before. However, you
can now specify exactly which parts of the layout to extract
using an optional flags parameter.
This also adds a manual test which can be very handy to
visualize QTextLayouts and how they are split into QGlyphRuns.
Fixes: QTBUG-103932
Change-Id: Ie4288fff338b9482aba0aba29fc7e1e59fa60900
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
The placeholder text was given its own QPalette color role in Qt 5.12,
but there has been no way to specify it from a Qt style sheet.
Fixes: QTBUG-93009
Change-Id: If58ca844c19c65b7eee14c6d5730a4ba27640c33
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Since setScaledClipRect will actually render only the necessary parts,
there may be insignificant differences in rounding/anitaliasing
compared to rendering the whole image first and then clipping.
Hence this autotest case would always fail. But that would not happen
in CI, since it tests qtbase without the qtsvg module, and then the
SVG tests are skipped. (For some reason, one ran into this in wayland
testing and made an exception for that, but obviously this failure has
nothing to do with wayland).
Work around the issue by converting the rendered images to 4 bpc
format, so the differences in the least significant bits get truncated
away.
Fixes: QTBUG-100917
Task-number: QTBUG-81044
Pick-to: 6.4
Change-Id: I1c14e98af22d0ae22a751960b69e692c7a38399b
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This reverts commit 013c346a8d. It was
determined to cause a regression in Qt Quick: QTBUG-106899.
In order to unblock integrations, we need to revert the change. It
can be re-committed later when the problem has been analyzed and
addressed.
Pick-to: 6.2 6.4
Fixes: QTBUG-106899
Task-number: QTBUG-89557
Task-number: QTBUG-104986
Change-Id: I04054587f68ab39fdb038b02fc69ebfa3dc7d197
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When laying out, we need to increase layout's maximum width _only_
if the previous line was not explicitly wrapped by a line or paragraph
separator, or if the current line's width is greater than the
previously accumulated layout's maximum width.
Fixes: QTBUG-89557
Fixes: QTBUG-104986
Pick-to: 6.2 6.4
Change-Id: Ib7cc4b9dda8f20166dcbd5cfd3b56424bb33d14a
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The composition implementation may act unexpectedly on Inf or NaN input
values. This change avoid those values, without changing the current
implementation.
Pick-to: 6.4
Fixes: QTBUG-101236
Change-Id: I8e4ee67f53093b7f81e014b28d8a028ba2ddcc47
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Replace the deprecated operator*() calls with various
overloads of QMatrix4x4::map()
Add a separate test for deprecated API and guard it with
QT_DEPRECATED_SINCE checks.
Task-number: QTBUG-104858
Change-Id: Ief2e03198696382dc626f01b209614fe320e70b2
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When TopMargin is set in TextBlock and the mouse click position is
between Margin (the mouse is not on the textrect), the cursor will
usually jump to the end. So topMargin should be considered when
hitTest() calculates coordinates.
Fixes: QTBUG-91774
Pick-to: 6.4 6.3 6.2
Change-Id: I231377263855b9cd7152684203fc4ed2e9299bb9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tang Haixiang <tanghaixiang@uniontech.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
On Wayland there is a special case when decorations are enabled,
where we post an initial update request to ensure widgets are
redrawn after the buffer is recreated (see
af7b60ade5c4be81cbc58eb18307c017d5594071 in qtwayland). To
make sure the test behaves the same on Wayland as on other
platforms, we disable client-side decorations when running
these tests.
The flag is primarily required for the requestUpdate() test
at the moment, but it is only queried once per application
run, so it has to be set before any tests are run.
Pick-to: 6.4
Fixes: QTBUG-100889
Change-Id: Ica6d744083ecae4a3722b6d04b956e7615f0dfe5
Reviewed-by: Inho Lee <inho.lee@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
It was an old test written in a very low-level way, which perhaps is ok
to be independent of testlib in a few tests; OTOH, it was blacklisted
on a couple of platforms. Perhaps doing touch events the standard way
could be more stable.
While we're at it:
- verify that the touch events are accepted, and thus verify the new
bool return value from commit()
- implement paintEvent() to help understand the layout, and touchpoint
locations
- remove repeated QCOMPARE lines
- skip the test if window positioning fails
- try to un-blacklist it, on the assumption that window positioning
failure was the reason
Task-number: QTBUG-87025
Task-number: QTBUG-104656
Pick-to: 6.4
Change-Id: Ie22eb24abf95cd849990a56212be87d06ce8e574
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Doris Verria <doris.verria@qt.io>
The paletteChanged() and fontChanged() signals were deprecated
in Qt 6.0, but the test was still using them unconditionally.
This patch guards the usage of the deprecated signals with
the usual QT_DEPRECATED_SINCE(6, 0) check, so that the test
can be built and run with QT_DISABLE_DEPRECATED_UP_TO >= 0x060000
This commit amends 68ea9c0227
Task-number: QTBUG-104858
Change-Id: Idb2da6d91afcdb664f325f23ec625947c9a7fac0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The client does not know its global window position on Wayland,
so testing for this will not work.
Pick-to: 6.4
Fixes: QTBUG-100888
Change-Id: Ibdfc84f1b33d25223dbd740603ce4783c21afc70
Reviewed-by: Inho Lee <inho.lee@qt.io>
The value will be propagated from Qt build.
Task-number: QTBUG-104858
Change-Id: Iae2c32c3037438f41b92f9ee28004f30eb4e3210
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The new name describes the behavior in a better way.
[ChangeLog][Build System] The QT_DISABLE_DEPRECATED_BEFORE macro is
renamed to QT_DISABLE_DEPRECATED_UP_TO. The old name is deprecated, but
is still recognized if it is defined during configuration and the new
name is not defined.
Task-number: QTBUG-104944
Change-Id: Ifc34323e0bbd9e3dc2f86c3e80d4d0940ebccbb8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This fails on Android 12 in CI.
Task-number: QTBUG-105739
Pick-to: 6.4 6.3 6.2
Change-Id: Ibf3deb6b84564f12b5172f2522875fe70f8ce87b
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This fails on Android 12 in CI.
Task-number: QTBUG-105738
Pick-to: 6.4 6.3 6.2
Change-Id: I94fcefae3d88087cd96f4043b015f9469ed629a9
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The default camera to plane distance is 1024, when rotating a big image
along the x or y axis, some areas of the screen may move above the
camera, causing the rotation to fail. A new rotation interface has been
added to allow users to specify the distance from the camera to the
plane themselves when rotating the QImage. Also, this support has been
added to QMatrix4x4::projectedRotate.
[ChangeLog][QtGui][QTransform] Added overloads to rotate() and
rotateRadians() that allow specifying of the distance to the rotation
plane.
Fixes: QTBUG-105088
Change-Id: I81f629916ddd9b6ab84e0282191e4284a88a85f5
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Running tst_qrhi -platform eglfs will pass on RPi4 / Mesa 22.
This does not test Vulkan of course since the platform plugin cannot
create a Vulkan instance.
Running tst_qrhi -platform vkkhrdisplay will enable Vulkan but will
still try OpenGL since the autotest does not query the platform
integration about OpenGL support. Make this nicer by skipping most of
the GL test if the platform integration we have cannot handle OpenGL
stuff anyway.
For some tests the data-driven approach has to be removed since doing
QFETCH without any rows will crash. These two OpenGL-specific tests
now check OpenGL support directly and QSKIP if needed.
While we are at it, fix up the Vulkan instance API version as well.
Pick-to: 6.4
Change-Id: I2891c04540bc2dfd0ccf475629bd23542bff15f5
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
If a font family has several instances from different foundries,
we disambiguate this by adding the foundry name in brackets behind
the family. But QFontDatabase::hasFamily() would only check for
families().contains(familyName). So if the database contains e.g.
Foo [Bar] and Foo [Baz] then a check for hasFamily("Foo") would
fail.
So we need to actually check for the family name instead. In
doing this, we also skip the extra step of building the list
and then searching it, but just go directly to the source.
This removes the BLACKLISTing of Ubuntu and also introduces a
QSKIP on Unix-based platforms without fontconfig, since there
is no way to know which default fonts are acceptable on those
platforms.
Pick-to: 6.4
Fixes: QTBUG-86967
Change-Id: Id8ad80a1671daf1c14fbad8bb8f4c51ee1c59709
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The intialSize bug has been fixed in Qt Wayland Client, and thus
this test will now start XPASSing.
Pick-to: 6.4
Task-number: QTBUG-66818
Change-Id: I4b9cb8bd9306a67f04295eb23f09574dad0e97f7
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
We need to skip the exifReadComments test case if reading text from
image has been configured off, like in webOS's Yocto recipe for QtBase.
Fixes: QTBUG-105393
Pick-to: 6.4
Change-Id: If45872ca7ed26620fa38bc6b47132363d661acdc
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Using convertDoubleTo() to get a whole number, from which to determine
the number of digits we're allowed before the fractional part, fails
if the double isn't a whole number, which lead to the skip being
checked. Use qFloor() of the double (as this should have as many
digits as the double had before its decimal point, which is what we
care about; qCeil() might round up to a power of ten).
This amends commit ff6d2cb0d5
Fixes: QTBUG-105341
Pick-to: 6.4 6.3 6.2
Change-Id: I4e0105d4602682c59e9830ec9a37556c96db884e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The vast majority of in-tree users pass simple and short C string
literals as the value. By porting to QByteArrayView, we document that
we'll accept non-NUL-terminated data, and do the NUL-termination
internally, using SSO'ed std::string, saving memory allocations in the
common case of short strings.
I didn't bother to check which direction std::string takes for
nullptrs these days (there was a change accepted in that area for
C++20 or 23), so play it safe and protect against them.
Follow-up to
Task-number: QTBUG-105302
Change-Id: I2369acc62f1d5cbc26135396cfe0602d8c75300c
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
...by removing the entire adjustedFormat() helper.
Qt Quick has never used this, which indicates it is not that
useful. Same goes for Qt Multimedia or Qt 3D. Ensuring depth and
stencil is requested is already solved by using
QSurfaceFormat::setDefaultFormat() or by adjusting the formats
everywhere as appropriate.
The helper function's usages are in the manual tests that use it as a
shortcut, and in the GL backend itself. Remove it and leave it up the
client to set the depth or stencil buffer size, typically in the
global default surface format. (which in fact many of the mentioned
manual tests already did, so some of calls to
window->setFormat(adjustedFormat()) were completely unnecessary)
By not having the built-in magic that tries to always force depth and
stencil, we avoid problems that arise then the helper cannot be easily
invoked (thinking of widgets and backingstores), and so one ends up
with unexpected stencil (or depth) in the context (where the GL
backend auto-adjusts), but not in the window (which is not under
QRhi's control).
It was in practice possible to trigger EGL_BAD_MATCH failures with the
new rhi-based widget composition on EGL-based systems. For example, if
an application with a QOpenGLWidget did not set both depth and stencil
(but only one, or none), it ended up failing due to the context -
surface EGLConfig mismatches. On other platforms this matters less due
to less strict config/pixelformat management.
Pick-to: 6.4
Change-Id: I28ae2de163de63ee91bee3ceae08b58e106e1380
Fixes: QTBUG-104951
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
We can implement the trivial {default,copy,move} construction outselves
inside qmetatype.cpp and qvariant.cpp, simplifying the QMetaType
interface object, removing up to three relocations per QMTI.
This adds the testing for QMetaType::isXxxConstructible and
isDestructible that couldn't be added before.
Change-Id: Ic44396b31ba04712aab3fffd16ff0a28f541d507
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The cause is that the first EXPOSE event comes with the window not
having focus yet. See QTBUG-105177.
Also remove processEvents() as events are always processed when doing
qWaitFor...().
Task-number: QTBUG-105177
Change-Id: I2260d1885388bbf7091c423bc9b4c16e2ed0090f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Previously the failure was been ignored because of the very generic
"linux" entry in the BLACKLIST file
Task-number: QTBUG-105201
Change-Id: I6914fe350f78266fc18541eb8fcd881f5a4ac511
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
+ I could not reproduce the flakiness on OpenSUSE Tumbleweed.
+ No significant flakiness can be seen for this test in our testresults
statistics.
+ Ubuntu-16.04 is no longer part of our CI
Change-Id: I7a18fc3fe2e58af8533171ebae0457b08424e810
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Before a recent fix it would happen occasionally that
lastNormalizedPositions.at(0) would segfault because the list was
empty. The cause of the flakiness was fixed, but make the test more
resilient anyway by checking first the list is correctly populated.
Furthermore on some platforms this check fails:
qAbs(leftWidget.lastNormalizedPositions.at(1).x() - 0.8) < 0.05
So instead of QVERIFY use QCOMPARE_LT to print the values when it fails.
Task-number: QTBUG-104268
Change-Id: Id5430eb53c133cf5d23647cfd9749f01f266efce
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Sometimes XCB_EXPOSE event is being propagated twice, once before and
once after qWaitForWindowExposed(). But the window has focus only after
the second expose event. Changing it to qWaitForWindowActive() fixes the
issue.
Fixes: QTBUG-104268
Pick-to: 6.2 6.3 6.4
Change-Id: Ibc78dd4958ed1a4a8d0967b29d2a53457ab9ae8b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The QTextFormat::FontFamily enum is deprecated since Qt 6.0, however it
is still used in the code.
To retain backward compatibility with the old data stream formats, we
introduce a new internal QTextFormat::OldFontFamily enum value, which
has exactly the same value as QTextFormat::FontFamily, and use it
instead.
Task-number: QTBUG-104857
Pick-to: 6.4 6.3 6.2
Change-Id: Ibf5258b621c2b0aa507005dfe2c1e80c26ddb0d4
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
... when QT_DISABLE_DEPRECATED_BEFORE is past the deprecation version.
This commit actually stops using the deprecated signals when we build
Qt with QT_DISABLE_DEPRECATED_BEFORE >= 0x060000. Otherwise we will
get a compilation error because the signals will be removed.
Task-number: QTBUG-104857
Pick-to: 6.4 6.3 6.2
Change-Id: Ie513ecc9451bf2d88f80857cf19f3d2b4958d022
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
- add move special member functions (docs copied from QHostInfo)
- add member swap
- use move-and-swap, not pure-swap, because these objects hold
resources (handles) other than just memory
- Q_DECLARE_SHARED (it's not implicitly shared, but explicitly)
- adds ADL swap and Q_DECLARE_TYPEINFO
[ChangeLog][QtOpenGL][QOpenGLBuffer] Added member-swap(), move
constructor, move assignment operator.
Change-Id: I22dc92108bdd393fff4361db23e94eaf3d7ea9cc
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Amends 1d961491d8. We modify the resolve
mask after making a shared copy of 'other', so we must detach. Call the
setter designed for that purpose.
Pick-to: 6.4 6.3 6.2
Task-number: QTBUG-98762
Change-Id: I4f45223e74764a341378992172787fae73efb8b7
Reviewed-by: JiDe Zhang <zhangjide@uniontech.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
If the cached font has a different DPI than the one used in
QPainter, we need to treat this the same as if other font
properties have changed and redo the layout.
This happened when running the QStaticText test on Wayland,
because the default dpi was 100 and the QPixmap we ended up
drawing to was 96. This caused the pixel size of the font to
be calculated differently when doing drawText() (using 96 dpi)
and drawStaticText() (using the cached 100 dpi).
Pick-to: 6.4
Fixes: QTBUG-100982
Change-Id: Ie4270341bb8a64b6458eb67ba460a282c65dc26b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Some of the offsets are already quint32 in the API (vertex input
attributes, dynamic offsets, offsets in draw calls), matching the
reality of the underlying 3D APIs, but many buffer-related functions
use int as of now, simply because that used to be the default choice,
and the same goes for sizes (such as buffer or range sizes). This is
not quite consistent and should be cleaned up if for nothing else then
just to make the classes consistent, but also because no 3D API use a
signed type for offsets, sizes, and strides. (except OpenGL for some)
When it comes to strides (for vertex inputs and raw image texture
uploads), those are already all quint32s. This is straightforward
because most of the 3D APIs use 32-bit uints for these regardless of
the architecture.
Sizes and offsets are often architecture-dependent (Vulkan, Metal),
but there is at least one API where they are always 32-bit even on
64-bit Windows (UINT == unsigned int, D3D11). In addition, we do not
really care about buffer or texture data larger than 4 GB, at least
not without realistic use cases and real world testing, which are
quite unlikely to materialize for now (esp. since we still have the
width/height of 2D textures limited to 16 or 32K in many cases even on
desktops, whereas 2GB+ buffers are not guaranteed in practice even
when an API seemingly allows it).
In any case, the important change here is the signed->unsigned
switch. A number of casts can now be removed here and there in the
backends, because the offsets and sizes are now unsigned as well,
matching the underlying API reality. The size can be potentially
increased later on with minimal effort, if that becomes necessary for
some reason.
Change-Id: I404dbc365ac397eaeeb3bd2da9ce7eb98916da5f
Reviewed-by: Inho Lee <inho.lee@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
56bd1b76d2 changed the update
resolve mask behavior in QPalette to avoid detaching brush data
when modifying the resolve mask if the brush value is not changed.
But this behavior broke compatibility, it introduced unknown risks, and
we cannot ensure that other code in Qt does not depend on the old
behavior.
We both need to ensure that we don't detach when the value is not
changed, and ensure that the resolveMask is always updated regardless
of whether the value changes, so we need to split them up and
independently share the brush data.
QFont will update its corresponding resolveMask even if the value has
not changed, so it is better to correct this behavior so that QPalette
and QFont are consistent.
[ChangeLog][QtGui][QPalette] Always update resolve mask in
QPalette::setBrush, even if the value of brush has not changed.
Fixes: QTBUG-98762
Pick-to: 6.4 6.3 6.2
Change-Id: Ib845361b30f21c3d78c16ced923c1678b12e05ac
Reviewed-by: JiDe Zhang <zhangjide@uniontech.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Unblock the qtdeclarative dependency update.
This behavior change is causing a regression for QQmlPreviewHandler's
zoom feature. Back out of the change for now, until we can find a way
to make both use cases work.
This reverts commit 1c0a56a2f3.
Change-Id: I1b3d84504bbcb4f2b2250a20194fdaf4ab4fd97f
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
QFutureCallOutEvent is used externally, so it needs to be exported.
This reverts commit 3141a13b2a.
Fixes: QTBUG-104732
Pick-to: 6.4
Change-Id: I82c9e7414192ee948f78259bd74a404691a7805a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
QT_SCREEN_SCALE_FACTORS in many cases set on behalf of the user,
instead of by the user, so we should make it less sharp and more
in line with standard high-dpi configuration.
Specifically, make it subject to the rounding policy set by
QGuiApplication::setHighDpiScaleFactorRoundingPolicy(). This
means that applications which support integer scale factors
only will see integers only, also when QT_SCREEN_SCALE_FACTORS
specifies a fractional factor.
Users who want to override can set
QT_SCALE_FACTOR_ROUNDING_POLICY=PassThrough
to restore the default Qt rounding behavior.
[ChangeLog][QtGui] The high-DPI scale factor rounding policy (settable with
QGuiApplication::setHighDpiScaleFactorRoundingPolicy() or
QT_SCALE_FACTOR_ROUNDING_POLICY) now applies to scale factors set
with QT_SCREEN_SCALE_FACTORS.
Pick-to: 6.4
Fixes: QTBUG-95930
Fixes: QTBUG-99546
Change-Id: Ibb0aa5cb9d3a356d33429d0efe69d984b2530728
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Test setting both via QGuiApplication property and environment.
Change-Id: Iaccc920adb6294d610b02d4c844aa5b15eb7eecd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Under normal circumstances, when the second point is touched, the
first point has not been released, and the message at this time
should contain two touch points. We are simulating the case where
the message is lost when the popup is closed by touch. Amends
efc02f9cc3
Pick-to: 6.4 6.3 6.2
Change-Id: Ic722e3dbd615c46076ede26611d0107501c5e274
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Make our QRhiMemAllocStats struct a bit more generic, drop the memory
allocation part in the naming, and use the same getter and struct for
reporting some important timings. (we are free to rename for now, there
are no users in other modules yet)
The time spent in graphics (or compute) pipeline creation has a special
relevance in particular with the modern APIs (as it is the single
biggest potentially time consuming blocking operation), but also highly
interesting with others like D3D11 simply because that's where we do the
expensive source-to-intermediate compilation is HLSL source is provided.
In order to see the effects of the various caching mechanisms (of which
there can be confusingly many, on multiple levels), the ability to see
how much time we spent on pipeline creation e.g. until we render the
first view of an application can be pretty essential.
Task-number: QTBUG-103802
Change-Id: I85dd056a39db7e6b25fb1f9d02e4c94298d22b41
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The goal is to make it possible to implement QSGRhiSupport::backendName()
in Qt Quick with just a single line:
return QString::fromUtf8(QRhi::backendName(m_rhiBackend));
instead of duplicating the strings and the logic.
Similarly, QBackingStoreRhiSupport can now drop its apiName() helper
entirely.
Change-Id: Ia8cbb1f1243539ed4d7a98e71dcc2ed56b017e40
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
When a markdown document contains a "naked" URL, or an angle-bracketed
<URL>, md4c recognizes it, and we set the AnchorHref charfmt property.
There's no need to expand it into the [text](url) form if the text is
the same as the url, there is no tooltip, and the url is valid.
QTextMarkdownWriter now writes a CommonMark "autolink" in that case:
https://spec.commonmark.org/0.30/#autolinks
[ChangeLog][QtGui][Text] QTextMarkdownWriter now writes an autolink
whenever a hyperlink has no custom text and no tooltip, including
when the document was parsed from Markdown containing a naked URL.
Pick-to: 6.4
Fixes: QTBUG-94713
Change-Id: I432db8499c62e1e0b1e913bfd8ef2147e3c2bb2a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
