Flaky fails in this test suggest that the VM on which the
test is executed does not get CPU resources allocated for enough time
to make this test pass. This change makes the test more resilient by
taking the measurements as quickly as possible.
In addition, use a sanity-check based on std::chrono APIs to abort the
test completely if we see that the clock has advanced too far to make
the following tests meaningful.
Change-Id: Ie6ac4ffb52f20e7774014f8222c9cd8f54d8a263
Fixes: QTBUG-64517
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Recursively defined entities can easily exhaust all available
memory. Limit entity expansion to a default of 4096 characters to
avoid DoS attacks when a user loads untrusted content.
Added a setter and getter to allow modifying the expansion limit.
[ChangeLog][QtCore][QXmlStream] QXmlStreamReader does now by default
limit the expansion of entities to 4096 characters. Documents where
a single entity expands to more characters than the limit are not
considered well formed. The limit is there to avoid DoS attacks through
recursively expanding entities when loading untrusted content. The
limit can be changed through the QXmlStreamReader::setEntityExpansionLimit()
method.
Fixes: QTBUG-47417
Change-Id: I94387815d74fcf34783e136387ee57fac5ded0c9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Make the order checkable and checked are set in insignificant, by
storing ignored checked value for un-checkable actions.
Also gives checkable its own changed signal.
Change-Id: If03db7c92481a542b6220604860abddb322bb517
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This reverts commit 94b3dd77f2.
The patch fixes ambiguity between a getter and a signal by changing the
getter name, but we still have to rename the signal to follow the signals
naming convention.
Revert the commit to keep the getter as is and change the signal name instead.
Change-Id: I0dd60cf1ae9d1bd95beeb8ad58661ca4b1fb63b9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Following wg21.link/LWG3228, it was found that a proper variant fix
requires that T* -> bool conversions be treated as narrowing
conversions in subclause wg21.link/dcl.init.lst. wg21.link/P1957R2 was
accepted in Prague 2020 as a DR and retroactively applies to older C++
standards.
Since we hard-code the algorithm of [dcl.init.lst], we can and must
add this manually.
[ChangeLog][QtCore][QObject] For the purposes of
QT_NO_NARROWING_CONVERSIONS_IN_CONNECT, pointer
(incl. pointer-to-member) to bool conversions are now considered
narrowing. This matches the resolution of a defect report in C++
itself.
Change-Id: Ifa9a3724c9c8ccd3dd6614928dbbe37477591dc1
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
On Windows, the test was leaking a registry key
HKEY_CURRENT_USER\Software\tst_QSettings_trailingWhitespace
Fix by using .ini-Format in the temporary directory created by the test.
Amends e66a878838.
Task-number: QTBUG-22461
Change-Id: If141a9e72e8faebc3fc46b94dab7b4b728a75292
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Test was failing due to missing windows resource files which contain the
version information for the executable.
Change-Id: I19b0c747c6b833bac64f3667e9286350e7842b7c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Teste executables were not built in the right location.
Change-Id: Ice05d44d53f7d8c2e9ec5a7b5c011a24ceb02a09
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QAbstractItemView::setIndexWidget() does not trigger a relayouting when
a new widget is set. This results in a wrong editor geometry under some
circumstances. Fix it by triggering a delayed relayout.
Fixes: QTBUG-81763
Change-Id: I75d0e19bd5e56d63effe4990d782d202fb39e3e6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This template function streams the given object into a QDebug instance
that operates on a string, and then returns that string.
This function is useful for cases where you need the textual
representation of an object for debugging, but cannot use operator<<.
A good example of this is when writing tests where you want to provide
a useful failure message involving details about an object, but must
provide it in a string to e.g. QVERIFY2.
[ChangeLog][QtCore][QDebug] Added static template toString() function,
which streams the given object into a QDebug instance that operates on
a string, and then returns that string.
Fixes: QTBUG-82309
Change-Id: I8411394e899dedad19cec788d779a4515d52ba11
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
0. The recent patch fixed the case when we can suddenly (meaning from
a particular version of Darwin) bind on a port number 1. Unfortunately,
it's not the case for IPv4 and while fixing one test case, the patch broke
another - so this patch addresses this.
1. Unfortunately, binding on a fixed port 1 on macOS made the test flaky
- we run this 'bind' several times and sometimes OS thinks port is already
bound (because of the previous test case) - closing the connection seems
to fix this problem (thus this patch do this also).
2. As a bonus a proper resource management added (aka RAII) where we would
previously leak a socket in case some QCOMPARE failed.
Fixes: QTBUG-81905
Change-Id: I90c128a332903bb44ab37de4775ca00d390dc162
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Make the test operate in its own temporary directory, so that entries
left behind by other test functions don't impact this test.
Also, call QFileSystemModel::sort explicitly; it would otherwise only
be done once through a single-shot timer, and the test processes events
until the model is populated, which might not process that delayed
sorting. Since dirsBeforeFiles tests the sorting algorithm and not
the sorting logic, best to do this explicitly.
In case of sort failure, print diagnostics.
Done-with: Friedemann Kleint <Friedemann.Kleint@qt.io>
Fixes: QTBUG-75452
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
(cherry picked from commit 4e796e0b0d)
Change-Id: I144b68a17280a38cc7d6daf7ec343eea4453623d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We observe this happening on macOS in the CI system, and it might happen
if a VM doesn't get CPU cycles for long enough time so that two timers
time out. Then event processing will process two timer events, and we
overwrite the timerIdFromEvent with the second event.
Instead, skip the test when this happens.
This is an ammendment to 5c520f4b0a
Fixes: QTBUG-71751
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 67491e2df5)
Change-Id: I30eef8cfc94988e6cad500dd5e6722488c2985be
On macOS, the registerTimer test case fails frequently, and blocks
valid integrations. With this change we try to detect the condition
and skip the test.
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 5c520f4b0a)
Change-Id: I97644b5b4654b4c96fbc99858bbf191e6edb5977
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Modeled after QRhiTexture's NativeTexture query.
This becomes valuable in advanced cases of integrating external native
rendering code with Qt Quick(3D), because it allows using (typically
vertex and index) buffers created by Quick(3D) in the custom renderer as
well, without having to duplicate the content by manually creating native
buffers with the same vertex and index data.
Change-Id: I659193345fa1dfe6221b898043f0b75ba649d296
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Add a new queriable resource limit value MaxAsyncReadbackFrames. Change
the autotest to rely on this instead of relying on the unspecified,
works-by-accident relation between readbacks and FramesInFlight. This
way even if the behavior diverges in some backend in the future, clients
(well written ones, that is), will continue to function correctly.
Also clarify the docs for FramesInFlight, and change d3d and gl to return
the correct value (which is 1 from QRhi perspective; the expanded docs now
explain a bit what this really means and what it does not).
Change-Id: I0486715570a9e6fc5d3dc431694d1712875dfe01
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
And move the actual implementation from corelib/io to network/kernel
sub-module.
Fixes: QTBUG-80308
Change-Id: I554b05bae3552c68e1e1a405c169366ee19120b2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This also fix the normalization algorithm:
- Some 'const' after pointers were not removed as they should.
- No need to keep the space in '> >' and '< :' in C++11 anymore
- Fix normalization of 'long unsigned int' and similar
Change-Id: I2b72f0fede96c1063e7b155d9f25a85fccfc7bf9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
the QMetaType is represented as a pointer to a "vtable" in the form of
a QtPrivate::QMetaTypeInterface*
The recomanded use of QMetaType is to construct an object with
QMetaType::fromType. This does not require any registration.
There is still an id() function which will do some registration
for compatibility with Qt5. Also the patch does not really touch
the other extra things that can be registered (data stream operator,
comparison operator, iteratable, ...) and this still uses the previous
system.
This is only the change in QMetaType, other changes to use it in QVariant
and QMetaObject will follow
Change-Id: Iffad20085cf33f33447f58a68236013a8b60fdbf
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Goes through the Qt code and make sure bytes-per-line calculations are
safe when they are too big for 32bit integers.
Change-Id: I88b2d74b3da82e91407d316aa932a4a37587c0cf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It is not possible to exclude targets based on the build configuration
in CMake. loadDebugPlugin() and loadReleasePlugin() will always fail as
both debug and release plugins are built regardless of the build
configuration.
This patch adds the CMAKE_BUILD define and skips the opposite test on
Windows. E.g.: With config = Debug, the loadReleasePlugin() test is
skipped and viceversa.
Change-Id: I2659882604bb39eb11d3e9e2b2b37a2972475285
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
After 4e796e0b0d we only have blacklisted
passes in the database, and no flaky failures on macOS.
Exception is WinRT, which stays blacklisted.
Change-Id: Ie1c492d20c76d4ba12b3f513ac038f023b864cb1
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Make the order of visible, group and enabled insignificant, by storing
ignored explicit values of enabled.
Also adds resetEnabled method QQuickAction has on the enabled property.
Change-Id: I9299dec0d1f74fdf655721bb4f72ba565ae85c7a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Widgets have a default palette and font that is influenced by several
factors: theme, style, QApplication-wide overrides, and the parent's.
If an application sets a font or palette on a parent, then widgets
inherit those settings, no matter when they are added to the parent.
The bug is that this is not true for widgets that have an application-
wide override defined by the platform theme. For those, we need to merge
parent palette and font attributes with the theme, and this is currently
not done correctly, as the respective masks are not merged and inherited.
This change fixes this for fonts and palettes. Children are inheriting
their parent's inheritance masks, combined with the mask for the
attributes set explicitly on the parent. This makes the font and palette
resolving code correctly adopt those attributes that are set explicily,
while leaving everything else as per the theme override.
The test verifies that this works for children and grand children added
to a widget that has a palette or font set, both when themed and
unthemed. Children with own entries don't inherit from parent.
The QFont::resetFont test had to be changed, as it was testing the
wrong behavior. If the child would be added to the parent before the
font property was set, then the test would have failed. Since this
change makes sure that children inherit fonts in the same way, no
matter on when they are added to their parent, the test is now
modified to cover both cases, and ensures that they return identical
results.
[ChangeLog][QtWidgets][QWidget] Fonts and palette settings are inherited
by children from their parents even if the children have application-
wide platform theme overrides.
Change-Id: I179a652b735e85bba3fafc30098d08d61684f488
Fixes: QTBUG-82125
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
Currently QShaderGenerator will crash when encountering some expressions
in input nodes.
For example, this node prototype would make it crash:
"VERTEX_COLOR": {
"outputs": ["color", "alpha"],
"rules": [
"headerSnippets": ["in vec4 vertexColor;"],
"substitution": "vec3 $color = vertexColor.rgb;
float $alpha = vertexColor.a;"
]
}
Change-Id: I37abb8099d376843a4cb13228140467dc1b8f60c
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
It was already possible to declare a node prototype with multiple
outputs, but trying to assign to all those outputs was not possible and
instead resulted in a crash.
It is now possible to declare nodes like this without crashing:
"SEPERATE_XYZ": {
"inputs": ["vector"],
"outputs": ["x", "y", "z"],
"rules": [
{
"substitution": "float $x = $vector.x;
float $y = $vector.y;
float $z = $vector.z;"
}
]
}
Change-Id: I748e77e84c9120dc688c573eee33dc13c6bfbace
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
If a widget backed by a QWindow is moved we need to translate the window
geometry into a position relative to the parent widget. In most cases this
was incidentally working due to widgets backed by QWindows always having
QWindow parents too, so the QWindow position was applicable to the widget
as well. But when Qt::WA_DontCreateNativeAncestors is used this is no
longer the case, and we would end up with a widget geometry that included
the parent positions all the way up to the next native widget.
The updatePos() function has been squashed into handleMoveEvent(), since
we need to ensure the position in the move event sent to the widget is
correct as well.
Change-Id: I55894ad7ab42a6d4d65e446a332ecdd7dcdcc263
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QLinkedList has been moved to Qt5Compat. Remove and stop mentioning
it in docs, examples (the docs & examples for QLinkedList itself will
be moved to Qt5Compat) and remove the corresponding tests.
Also remove QT_NO_LINKED_LIST, since it's not needed anymore.
Task-number: QTBUG-81630
Task-number: QTBUG-80312
Change-Id: I4a8f1105cb60aa87e7fd67e901ec1a27c489aa31
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This fixes the shader generation for graphs like this one:
Function0 ------> Output0
(with unbound input)
Input ------> Function1 ------> Output1
With those graphs, createStatements will not return any statement for
nodes Function0 and Output0.
Change-Id: Iec32aa51623e176b03ae23e580f06d14df80a194
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
Ensure that each image plugin really clips within the scaled coordinate
system, as documented. Always clipping from 0,0 wasn't interesting.
Task-number: QTBUG-81044
Change-Id: Ic06fe52f92f719e1ff9c0348f667215e53b60fb0
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QShaderGenerator didn't handle substitutions like
`vec4 $color = mix($color1, $color2, $fac);`
Note that `$color` is a prefix to `$color1` and `$color2`. For the
substitution `QByteArray::replace` was used so if `$color` was handled
first and replaced by `v1`, `$color1` and `$color2` were never correctly
replaced and instead became `v11` and `v12` which caused a crash later
on.
Change-Id: Idaf800fdac468f33c323eb722701da5f8eb918d6
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
By sending it to all top level windows it will make it possible for
non widget based controls to listen for this event if it cares about it
so it can handle translation updates as appropriate.
Task-number: QTBUG-78141
Task-number: QTBUG-82020
Change-Id: I8f35cdcccd81a199ff780c3f4f3d2c663480d638
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Same pattern as QtQuickWidgets. Gets rid of QtOpenGL's dependency on QtWidgets.
Task-number: QTBUG-74409
Change-Id: I4f9b55c23e25a1e0519734037b768a16e870c7d2
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This test fails sporadically on OpenSUSE, with the widget receiving
multiple resize events. Assuming that window management kicks in at
unpredictable moments and changes the geometry of the managed widget
possibly in several steps, we try to turn off all window management
on X11.
Change-Id: I7d2120c02eb870040b2ee94986a2ac5608d5a423
Fixes: QTBUG-66345
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Extract the character in its proper unicode form and encode it in a
new single_character_data table of locale data. Record each entry as
the range within that table that encodes it. Also added an assertion
in the generator script to check that the digits CLDR gives us are a
contiguous sequence in increasing order, as has been assumed by the
C++ code for some time. Lots of number-formatting code now has to take
account of how wide the digits are.
This leaves nowhere for updateSystemPrivate() to record values read
from sys_locale->query(), so we must always consult that function when
accessing these members of the systemData() object. Various internal
users of these single-character fields need the system-or-CLDR value
rather than the raw CLDR value, so move QLocalePrivate's methods to
supply them down to QLocaleData and ensure they check for system
values, where appropriate first.
This allows us to finally support the Chakma language and script, for
whose number system UTF-16 needs surrogate pairs.
Costs 10.8 kB in added data, much of it due to adding two new locales
that need surrogates to represent digits.
[ChangeLog][QtCore][QLocale] Various QLocale methods that returned
single QChar values now return QString values to accommodate those
locales which need a surrogate pair to represent the (single
character) return value.
Fixes: QTBUG-69324
Fixes: QTBUG-81053
Change-Id: I481722d6f5ee266164f09031679a851dfa6e7839
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For graphs like this one:
Input ----> Function1 ----> Output
\
---> Function2
(unbound output)
We would have generated only 2 statements, for Function1 and Output.
This change fixes this by treating Function2 like an output.
Therefore it generates 4 statements: Input, Function1, Output and
Function2.
Change-Id: Iaada40b9b949d771806dd47efad4f7ef2a775b48
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
If necessary, the feature still can be enabled with -feature-ftp.
Task-number: QTBUG-80339
Change-Id: I7dafaad254d1396f24ac5c339d55c3bedfa97f1c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
QUtf32::convertToUnicode() was forgetting to set headerdone when it
dealt with the header (for contrast, Utf16::convertToUnicode() does).
Fixes: QTBUG-62011
Change-Id: Ia254782ce0967a6cf9ce0e81eb06d41521150eed
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Apple changed on macOS 10.14 (Mojave). Windows has always allowed.
Fixes: QTBUG-81905
Change-Id: I572733186b73423b89e5fffd15f12fee3f03c055
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The comment in QNativeSocketEnginePrivate::fetchConnectionParameters()
talked about IPv6 v4-mapped addresses. However, toIPv4Address also
converts the unspecified address (::), which resulted in QAbstractSocket
saying that it had bound to QHostAddress::Any instead of
QHostAddress::AnyV6
Change-Id: I572733186b73423b89e5fffd15f138579c5c0c50
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Conflicts:
tests/manual/rhi/hellominimalcrossgfxtriangle/CMakeLists.txt
Hopefully final merge from wip/cmake, and then all cmake changes
should target dev directly.
Change-Id: I29b04c9b0284e97334877c77a32ffdf887dbf95b
Remove the compat SQL plugin names (QMYSQL3, QOCI8, QODBC3, QPSQL7)
since they are not needed and just confuse the user
[ChangeLog][QtSql] The compat plugin names QMYSQL3, QOCI8, QODBC3 and
QPSQL7 are no longer available.
Change-Id: I6d88f449ef3e18881a6970fb374ba0ab074ef302
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
So far, objects had no identification, and both gadgets and namespaces
were called "gadget". qmltyperegistrar, however, is especially
interested in the distinction between namespaces and anything else.
Task-number: QTBUG-68796
Change-Id: Ic5739727bdef7766de6e535c6568920198fadb2b
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
We observe this happening on macOS in the CI system, and it might happen
if a VM doesn't get CPU cycles for long enough time so that two timers
time out. Then event processing will process two timer events, and we
overwrite the timerIdFromEvent with the second event.
Instead, skip the test when this happens.
This is an ammendment to 5c520f4b0a
Change-Id: Ibc1169b5458c8dce9d4fe9ce715f49c396e17b86
Fixes: QTBUG-71751
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
...and merge the two overloads of getDouble() in Qt6
Change-Id: I55faa2ff222b41e48889a0ef14dd00a6da691c36
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We added a work-around to disable the test when the Waree Book
font was not available, but this also excludes perfectly valid
versions of the font, so it is a bit unfortunate.
Change-Id: Ibeeff78d87acc384c1aa1b01e988edd524c60575
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Make the test operate in its own temporary directory, so that entries
left behind by other test functions don't impact this test.
Also, call QFileSystemModel::sort explicitly; it would otherwise only
be done once through a single-shot timer, and the test processes events
until the model is populated, which might not process that delayed
sorting. Since dirsBeforeFiles tests the sorting algorithm and not
the sorting logic, best to do this explicitly.
In case of sort failure, print diagnostics.
Change-Id: I44c2b82ef1330cc8787aed2b5cbf109ef3a67876
Done-with: Friedemann Kleint <Friedemann.Kleint@qt.io>
Fixes: QTBUG-75452
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This reverts commit 0de6c26ac1.
The patch fixes ambiguity between a getter and a signal by changing the
getter name, but we still have to rename the signal to follow the signals
naming convention.
Revert the commit to keep the getter as is and change the signal name instead.
Change-Id: I67dbb5cada25da473bdd02e71b1e2d9bd03f039e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The following signals have been removed:
- void activated(const QString &);
- void highlighted(const QString &);
Task-number: QTBUG-81845
Change-Id: I61b552d9258987d4252202953aaf4909f9bd718e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
This allows for instance to show the current UI language in the UI,
or to load additional translations that match the .qm file by other
means.
This is especially useful in the case of QTranslator::load(QLocale(),
...), in which case different language and country combinations might
be tried.
Another option is to inspect the file name via QTranslator::filePath();
however, this is more error-prone, and might also miss information
(if the .qm file name doesn't have a country suffix, or no suffix at
all).
Change-Id: I6f565d53d8f50e21241ccae6c4de264747ac8f81
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Some Qt classes already accept std::chrono durations in their methods
(see, for example, QTimer). The proposed change adds an overload
with std::chrono::milliseconds to QStateMachine::postDelayedEvent().
Change-Id: I360fd2bb54fedc7415e9ec17e096095be3604d41
Reviewed-by: Erik Verbruggen <erik.verbruggen@me.com>
There were a few surprises:
- QByteArray::compare() are missing noexcept (will add)
- ibid., called with non-ascii content and CaseInsensitive fails
(this was discussed on the ML, with tentative agreement that
it's a feature, not a bug; waiting for QUtf8String(View) for a
fix, then).
- As was the case when we did this exercise with the relational
operators, QString(Ref)/QChar is not noexcept (will fix)
These have been QEXPECT_FAIL'ed.
Not much of the cartesian product is implemented at all, yet. These
have been #ifdef'ed with NOT_YET_IMPLEMENTED to see what's still
missing.
Change-Id: I7d9b21e292b98f980aacdc6248e88188f7472ba2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I55cb9a6b3aebac68fb1b20127ba7aa501b4a3f2b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Various compilers have various fun ways of failing to compile when it
is used so let's check if they will work properly during configure
rather than much later.
Change-Id: Ia93d4b91b3d269b4cab2a5f677c3c89e06b44ce3
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
As we want Qt's own revisions to follow the Qt versioning scheme, we
need to allow for the minor version to reset to 0 now. In order to
facilitate this, we interpret the argument passed the current Q_REVISION
macro as major version and allow for an optional minor version. Both are
encoded it into the resulting revision number.
Change-Id: I3519fe20233d473f34a24ec9589d045cdd162a12
Reviewed-by: Fawzi Mohamed <fawzi.mohamed@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remove temporarily the reference returned by QTransform::toAffine()
since we don't keep the QMatrix object internally anymore.
This is done in order to compile the rest of the code.
The follow-up patch is going to remove that method completely.
Task-number: QTBUG-81628
Change-Id: If7140eedb7582d81ac8da529017cf792174e86ab
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The unspecified segment is between 0 and 1. This is because
QTypeRevision::zero(), as the default revisision needs to be smaller
than any other. At the same time we want explicitly specified non-zero
revisions to be larger than unspecified ones. Breaking this down on a
per segment level gives us the order shown here.
Change-Id: I1cca12f1180eb6f77563fb5b22c3400e118dc5e9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Moving a file to the trash should preferably done via IFileOperation.
However, the implementation on Windows 7 ignores the operation flags
that request the shell not to show any confirmation dialogs or other UI
elements.
SHFileOperation is an old API that doesn't show any UI, but has the
limitation that it doesn't report the location of the file in the trash
after the move. So an application cannot restore the file, but the user
can do so via Explorer.
Overall, the better compromise is to not have dialogs at the expense of
not being able to report the new path. This allows us to run the unit
test on Windows 7 as well.
Change-Id: Ib8e651a69e2c6750f668b52d2a70925d156cc8ae
Fixes: QTBUG-81927
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
bind on port 1/82 is now success, in QTcpSocket's test things are more
broken: changing the test row makes the test flaky with port not available
due to the previous test case.
Task-number: QTBUG-81905
Change-Id: Iaf1b5457fa3961a4f6bc92b79aa4668a8359136e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
On macOS, the registerTimer test case fails frequently, and blocks
valid integrations. With this change we try to detect the condition
and skip the test.
Change-Id: Id2065f606abfd431971becf63034a4c1f0fdb9e5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The font change in QComboBox might cause incorrect appearance of popup
menu since it doesn't notify popup menu to relayout itself
Fixes the issue by send font change event to the item view of popup
menu when received a font change event in QComboBox
Fixes: QTBUG-75846
Change-Id: I4821015cca95a7e233a22262596a6fbf27f10aef
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The test orchestrator shouldn't have to deal with the individual options
needed for each test.
Change-Id: I78bbf4850cc649e625bd08a7aedf02267ba1314d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Change-Id: I2fd7a39684bde44d82c4d877086f606413d68520
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
These tests are apparently not run at the moment, otherwise they would
have failed to even start, but they should definitely not have the tst
prefix.
Change-Id: Iafcec2764ebb3570e6bc6ebfba27d92a94639893
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Those types are used as properties of Q(Date)TimeEdit,
QKeySequenceEdit.
Fixes: PYSIDE-1215
Change-Id: I8b9ffebb8229fff447aa7dd6bee6e037d708333c
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
In tst_QLocale::windowsDefaultLocale(), we configure the long and
short date formats and the short time format eccentrically, then
verify that QLocale::system() does actually get these eccentric
formats. However, we did not configure the long time format (whose
MS-API name doesn't match that of the other formats), so had to rely
on a guess at the system locale's format. That, however, is not
robust; so now configure the long time format, too.
Removed a duplicated test, at the same time.
Fixes: QTBUG-36306
Change-Id: I04dc22c7eb1b58af55412b598873868f79e9c74f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
If we had one test function that just did
tst_Mouse::f1()
{
QTest::mouseMove(w, QPoint(0,0));
}
and another test function that did
tst_Mouse::f2()
{
QTest::mouseMove(w, QPoint(500,500));
}
their corresponding event timestamps were only 1 apart from each other.
This meant that any code that tried to estimate the velocity of a mouse
cursor would get a really high velocity estimate inside f2(). This would
come as a surprise to most people. So to avoid this, we add a 500 ms
timestamp delay between each test function call.
In theory this could also prevent generating a mouseDoubleClickEvent
when a pair of test functions containing a press-release sequence was
run, but there is a separate pre-existing mechanism to handle that case.
Change-Id: Icd4fc35853c09f080466d22411208c7b5c4174b5
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Due to the nature of QFile just operating on a file path, this also
works for paths that are actually directories.
The test covers files from different locations on which this
operation should typically succeed, but tries to handle the case
where trashing files will fail because of the file system
structure.
On Windows 7, running the test will open a confirmation dialog as
the implementation of IFileOperation doesn't respect the various
flags. This might depend on the specific Windows 7 patch level,
and the option to always use SHFileOperation on that platform needs
to be evaluated further.
[ChangeLog][QtCore][QFile] Introduce QFile::moveToTrash to allow
applications to move files to the trash.
Change-Id: I45019040c25b30f7db293b6933c63aca2f319514
Fixes: QTBUG-47703
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
This way we produce valid xml also for the no-proxy case.
Change-Id: I5a277255d22c3814fe463c0cd013c04ddc6ad919
Reviewed-by: André Hartmann <aha_1980@gmx.de>
When QWidget is being destroyed, its winId is cleared, and
a QEvent::WinIdChange is sent. If a listener of this event
reacted by calling winId() again, we might crash.
A crash can be observed when this child widget is destroyed in dtor of its parent.
E.g. here is a hierarchy of widgets:
1:QWidget
2:QObject
3:QWidget
4:QWidget
If a listener subscribed for WinIdChange events from (4),
and there is a connection to destroy (4) when (2) is destroyed.
This will lead to infinite loop:
1. QWidget::~QWidget
2. QWidget::destroy
3. QWidgetPrivate::setWinId(0)
4. QCoreApplication::sendEvent(q, QEvent::WinIdChange);
5. eventFilter
6. QWidget::winId
7. QWidgetPrivate::createWinId (this=0x555555957600) at kernel/qwidget.cpp:2380
8. QWidgetPrivate::createWinId (this=0x55555596b040) at kernel/qwidget.cpp:2387
9. QWidget::create (this=0x5555558f2010, window=0, initializeWindow=true, destroyOldWindow=true) at kernel/qwidget.cpp:1163
10. QWidgetPrivate::createWinId (this=0x55555596b040) at kernel/qwidget.cpp:2387
11. QWidget::create (this=0x5555558f2010, window=0, initializeWindow=true, destroyOldWindow=true) at kernel/qwidget.cpp:1163
12. QWidgetPrivate::createWinId (this=0x55555596b040) at kernel/qwidget.cpp:2387
Fixes: QTBUG-81849
Change-Id: Ib4c33ac97d9a79c701431ae107bddfb22720ba0d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Back-ends need to catch NULL data so as not to call system APIs with
invalid pointers.
[ChangeLog][QtCore][QCollator] Fixed a regression introduced in 5.14.0
that caused QCollator not to operate with default-constructed QStrings
and print a warning on Windows.
Fixes: QTBUG-81673
Change-Id: I2eafe1e188b436afcca3cf2ecdf98bba707c44c9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This ammends 601ce9e08a, which added
a new test case for the internal Qt APIs. The test was not
getting executed by coin as it wasn't included in the io.pro file,
and trying to fix that generates link errors on Windows, since these
internal APIs depend on other internal APIs.
Short of bootstrapping much of QtCore into this test case, the only
sensible option is to remove this test case again, and cover the
testing when the public API is added in a follow up commit.
At the same time, address those failures that were discovered
on platforms that could build the test, and fix compilation on
iOS platforms in Coin.
Change-Id: Id31b43c9df9f205476c48bccb6b87c7a53ed15c5
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
This particular test may serve as sample code in various materials in
the future, therefore it is highly beneficial if it is kept in good shape.
Make it easier to read, more compact, and split up among the natural
boundaries of the functionality (global setup in main, window+swapchain
management in Window, graphics resource setup and draw call recording
in HelloWindow).
Change-Id: I2451d3961a01131dcbffe66baf23d2cf9bfd077f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Those classes will not have relations anymore in Qt6, so they need
separate streaming operators. Writing of multi maps/hashes requires some
additional care so that restoring keeps the order of how iteme have been
inserted.
Change-Id: If41d0c5c24962764a2cb81bd2de9e2fadf1a2b63
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This pulls the CMake port, which not only adds CMake files but also
modifies existing code. A brief summary of "seemingly unrelated" changes:
* configure.json was re-formatted to not use multi-line strings. That
is an extension of the Qt JSON parser but not JSON compliant, which
is needed for the configure.json-to-cmake conversion script (python).
* Some moc inclusions were added due to CMake's slightly different way
of handling moc. With the changes the files build with qmake and cmake.
* Since CMake just grep's for the Q_OBJECT macro to determine whether to
call moc (instead of doing pre-processing like qmake), the existing use
of "Q_OBJECT" in our documentation was changed to \Q_OBJECT, which cmake
doesn't see and which is now a qdoc macro.
* QTestLib's qFindTestData was extended to also search in the source
directory known at build time.
What this change also brings is a new way of building modules in Coin by using
YAML configuration files that describe the steps of building and testing in Coin
specific terms. The platform configuration files in qt5 are instructed to use the
old Coin built-in way of testing ("UseLegacyInstructions" feature) but for any
configurations that do not have this, these yaml files in the coin/ sub-directory
are used and shared across repositories.
Change-Id: I1d832c3400e8d6945ad787024ba60e7440225c08
On macOS it's possible to configure the system locale to not do digit
grouping (separating "thousands", in most western locales); it then
returns an empty string when asked for the grouping character, which
QLocale's system-configuration then ignored, falling back on using the
base UI locale's grouping separator. This could lead to the same
separator being used for decimal and grouping, which should never
happen, least of all when configured to not group at all.
In order to notice when this happens, query() must take care to return
an empty QString (as a QVariant, which is then non-null) when it *has*
a value for the locale property, and that value is empty, as opposed
to a null QVariant when it doesn't find a configured value. The caller
can then distinguish the two cases.
Furthermore, the group and decimal separators need to be distinct, so
we need to take care to avoid cases where the system overrides one
with what the CLDR has given for the other and doesn't over-ride that
other.
Only presently implemented for macOS and MS-Win, since the (other)
Unix implementation of the system locale returns single QChar values
for the numeric tokens - see QTBUG-69324, QTBUG-81053.
Fixes: QTBUG-80459
Change-Id: Ic3fbb0fb86e974604a60781378b09abc13bab15d
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The "title" in markdown is the tooltip, not the name attribute of
a link. Also, tell the char format that it's an anchor.
Change-Id: I2978848ec6705fe16376d6fe17f31007cce4b801
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The reporter was probably named 'xunit' based on the historical use of
xUnit to refer to testing frameworks derived from Smalltalk's SUnit.
These frameworks typically added their own prefix, e.g. JUnit for Java,
RUnit for R, etc.
The most popular of these was the JUnit framework, and the corresponding
XML output produced by the Ant built tool became somewhat of a de facto
standard, which is probably why we chose to model our reporter after it.
Nowadays however, naming it 'xunit' is problematic as there is actually
a testing famework named xUnit.net, typically shortened to, you guessed
it: xunit.
Test report consumers will typically have a junit mode, and an xunit
mode, and the latter could easily be mistaken for what testlib outputs,
unless we clarify this.
The clarification also allows us to safely extend our support for the
JUnit XML format to incorporate some elements that are nowadays common,
but where we are lagging behind the standard.
[ChangeLog][QTestLib] The formerly named 'xunitxml' test reporter has
been renamed to what it actually is: a JUnit test reporter, and is now
triggered by passing -o junitxml to the test binary.
Change-Id: Ieb20d3d2b5905c74e55b98174948cc70870c0ef9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Partially reverts 4f077b7e5f.
Can't overload with forwarding references and lvalue references. Use a single
forwarding reference overload, but take care of not trying to create a
QScopeGuard of reference type and forward instead of moving.
Add tests to ensure calling with both lvalues and rvalues is possible.
Change-Id: Ia034afe0a8feb08246c2c7c154a85cae37421c98
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The change to using setters left a quirk from the previous un-mutable
design where you couldn't set values on an invalid color space and
create a valid one.
This changes that so it works as expected for an imperative API, but
is also needed for the declarative QML bindings.
Change-Id: I246cfc38b364b156238151c42c1df82a3f1cc9d3
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This makes it easier to create one without having to create
a derivative class. The patch also adds a path to avoid using
QRunnable directly in QThreadPool.
Change-Id: I9caa7dabb6f641b547d4771c863aa6ab7f01b704
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
[ChangeLog][QtCore] QCalendar::monthsInYear(QCalendar::Unspecified)
now returns maximumMonthsInYear(). QCalendar::daysInYear() now makes
clear that its handling of unspecified year is undefined.
Change-Id: Ifef8723193868c666f6afeb7f190af4929d30dea
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It needed re-implemented in terms of the new API (in case QTime(0, 0)
was skipped, on the date in question, by a spring-forwrd), which makes
it redundant (and supports choice of spec and zone or offset, which it
did not).
Change-Id: I1e3c3e794632c234f254be754ed6e4ebdaaaa6bc
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
It was more complex than it needed to be and was a test of QString,
not of QLocale. This leaves tst_QLocale::negativeZero() available to
now test how QLocale handles negative zero.
Change-Id: Ic9aae250c29f579e6d60fba8404b38673a3b489f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We have long (since 4.5.1) coerced it to lower-case, for no readily
apparent, much less documented, reason. CLDR says most locales use an
upper-case E for this - let's actually use what CLDR says we should
use.
The code that matches the exponent separator was doing so
case-insensitively in any case; that needed adaptation now that the
separator's case isn't pre-determined; and, in any case, should have
been done using case-folding rather than upper-casing. In the process,
removed some spurious checks for "'e' or 'E'" in the result, since the
exponent separator is always represented by 'e' (and an 'e' might also
be present for the separate reason of its use as a beyond-decimal
digit representing fourteen).
[ChangeLog][QtCore][QLocale] QLocale::exponential() now preserves the
case of the CLDR source, where previously it was lower-cased.
Change-Id: Ic9ac02136cff79cb9f136d72141b5dbf54d9e0a6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
These tests fail locally, and have been reported to
fail on the CI system.
Change-Id: Ia76bb15c288af4171ebe47b3c30f3651a63df3f2
Task-number: QTBUG-75786
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QTypeRevision is needed to encode the value of the new two-argument
Q_REVISION(major, minor) macros. Those, in turn are necessary because
the minor version resets to 0, and we need to take the major version
into account when stating revisions for Qt classes.
Task-number: QTBUG-71278
Change-Id: I63eff6eab7d6e4f8f32b359a216767c98947a106
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
A couple of tests in the QHash autotest could iterate beyond
end(), leading to undefined behavior. This is bound to crash
with the new upcoming QHash implementation.
Change-Id: I977fc939e6e472f05b7cb2fa0a79c2d5f8782f45
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Remove support for reverse iteration over a QSet.
Change-Id: I1e9c986a118aea4ebeb7fcdceb41e9ce6593cdb6
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QHash and QMultiHash are separate classes in the future, and
the iterator is not random access.
Change-Id: I7e1a4162ca964001c8da81a2fd7c41ccae27bdb3
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Split QHash and QMultiHash, and get rid of some compiler warnings.
Change-Id: I48991f097f408ad5c1aa349443e26ab816e0b736
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Prepare the test cases so that QHash and QMultiHash are used
as if they were fully independent classes.
Change-Id: Iaf5d65c8f6321ec2edaef490e657b144619655a0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
