[ChangeLog][Deprecation Notice] QAbstractSocket::error() (the signal) is deprecated; superseded by errorOccurred()
Change-Id: I11e9c774d7c6096d1e9b37c451cf0b99188b6aad
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Much of this test case was testing that the machine it runs on didn't
take more than an expected amount of time, which is an assumption that
won't hold in a virtual environment where the hypervisor might decide
to not allocate any CPU time to the machine at certain times.
Instead, take the samples that we want to compare with once, then
use them as reference for further comparisons.
Also, split the test in two, with the comparison operators and msecsTo
test moved into a separate test function.
Change-Id: I7db12b8e02552f4d63af933c1b0fee9d62b591eb
Fixes: QTBUG-58713
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This test doesn't test whether window activation works, so there is
no reason to fail the test if it doesn't. Instead, abort the test, so
that we can record it as a skipped test.
Change-Id: Ia44308ef17f110d40c6455d7ee85d90914face4f
Fixes: QTBUG-22455
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Reviewed-by: Levon Sargsyan <levon.sargsyan@qt.io>
Freetype can give us non empty bounds for zero-width characters,
this change just makes us skip metrics of characters already found to
not contribute to text advance. The coretext and windows
font-engines already uses the already calculated advance.
Change-Id: I82b3521a4fb92614be509be5982cd5ab9c1eb7de
Fixes: QTBUG-58854
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Flaky fails in this test suggest that the VM on which the
test is executed does not get CPU resources allocated for enough time
to make this test pass. This change makes the test more resilient by
taking the measurements as quickly as possible.
In addition, use a sanity-check based on std::chrono APIs to abort the
test completely if we see that the clock has advanced too far to make
the following tests meaningful.
Change-Id: Ie6ac4ffb52f20e7774014f8222c9cd8f54d8a263
Fixes: QTBUG-64517
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Recursively defined entities can easily exhaust all available
memory. Limit entity expansion to a default of 4096 characters to
avoid DoS attacks when a user loads untrusted content.
Added a setter and getter to allow modifying the expansion limit.
[ChangeLog][QtCore][QXmlStream] QXmlStreamReader does now by default
limit the expansion of entities to 4096 characters. Documents where
a single entity expands to more characters than the limit are not
considered well formed. The limit is there to avoid DoS attacks through
recursively expanding entities when loading untrusted content. The
limit can be changed through the QXmlStreamReader::setEntityExpansionLimit()
method.
Fixes: QTBUG-47417
Change-Id: I94387815d74fcf34783e136387ee57fac5ded0c9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This reverts commit 94b3dd77f2.
The patch fixes ambiguity between a getter and a signal by changing the
getter name, but we still have to rename the signal to follow the signals
naming convention.
Revert the commit to keep the getter as is and change the signal name instead.
Change-Id: I0dd60cf1ae9d1bd95beeb8ad58661ca4b1fb63b9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Following wg21.link/LWG3228, it was found that a proper variant fix
requires that T* -> bool conversions be treated as narrowing
conversions in subclause wg21.link/dcl.init.lst. wg21.link/P1957R2 was
accepted in Prague 2020 as a DR and retroactively applies to older C++
standards.
Since we hard-code the algorithm of [dcl.init.lst], we can and must
add this manually.
[ChangeLog][QtCore][QObject] For the purposes of
QT_NO_NARROWING_CONVERSIONS_IN_CONNECT, pointer
(incl. pointer-to-member) to bool conversions are now considered
narrowing. This matches the resolution of a defect report in C++
itself.
Change-Id: Ifa9a3724c9c8ccd3dd6614928dbbe37477591dc1
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
On Windows, the test was leaking a registry key
HKEY_CURRENT_USER\Software\tst_QSettings_trailingWhitespace
Fix by using .ini-Format in the temporary directory created by the test.
Amends e66a878838.
Task-number: QTBUG-22461
Change-Id: If141a9e72e8faebc3fc46b94dab7b4b728a75292
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QAbstractItemView::setIndexWidget() does not trigger a relayouting when
a new widget is set. This results in a wrong editor geometry under some
circumstances. Fix it by triggering a delayed relayout.
Fixes: QTBUG-81763
Change-Id: I75d0e19bd5e56d63effe4990d782d202fb39e3e6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
0. The recent patch fixed the case when we can suddenly (meaning from
a particular version of Darwin) bind on a port number 1. Unfortunately,
it's not the case for IPv4 and while fixing one test case, the patch broke
another - so this patch addresses this.
1. Unfortunately, binding on a fixed port 1 on macOS made the test flaky
- we run this 'bind' several times and sometimes OS thinks port is already
bound (because of the previous test case) - closing the connection seems
to fix this problem (thus this patch do this also).
2. As a bonus a proper resource management added (aka RAII) where we would
previously leak a socket in case some QCOMPARE failed.
Fixes: QTBUG-81905
Change-Id: I90c128a332903bb44ab37de4775ca00d390dc162
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Make the test operate in its own temporary directory, so that entries
left behind by other test functions don't impact this test.
Also, call QFileSystemModel::sort explicitly; it would otherwise only
be done once through a single-shot timer, and the test processes events
until the model is populated, which might not process that delayed
sorting. Since dirsBeforeFiles tests the sorting algorithm and not
the sorting logic, best to do this explicitly.
In case of sort failure, print diagnostics.
Done-with: Friedemann Kleint <Friedemann.Kleint@qt.io>
Fixes: QTBUG-75452
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
(cherry picked from commit 4e796e0b0d)
Change-Id: I144b68a17280a38cc7d6daf7ec343eea4453623d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We observe this happening on macOS in the CI system, and it might happen
if a VM doesn't get CPU cycles for long enough time so that two timers
time out. Then event processing will process two timer events, and we
overwrite the timerIdFromEvent with the second event.
Instead, skip the test when this happens.
This is an ammendment to 5c520f4b0a
Fixes: QTBUG-71751
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 67491e2df5)
Change-Id: I30eef8cfc94988e6cad500dd5e6722488c2985be
On macOS, the registerTimer test case fails frequently, and blocks
valid integrations. With this change we try to detect the condition
and skip the test.
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 5c520f4b0a)
Change-Id: I97644b5b4654b4c96fbc99858bbf191e6edb5977
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Modeled after QRhiTexture's NativeTexture query.
This becomes valuable in advanced cases of integrating external native
rendering code with Qt Quick(3D), because it allows using (typically
vertex and index) buffers created by Quick(3D) in the custom renderer as
well, without having to duplicate the content by manually creating native
buffers with the same vertex and index data.
Change-Id: I659193345fa1dfe6221b898043f0b75ba649d296
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Add a new queriable resource limit value MaxAsyncReadbackFrames. Change
the autotest to rely on this instead of relying on the unspecified,
works-by-accident relation between readbacks and FramesInFlight. This
way even if the behavior diverges in some backend in the future, clients
(well written ones, that is), will continue to function correctly.
Also clarify the docs for FramesInFlight, and change d3d and gl to return
the correct value (which is 1 from QRhi perspective; the expanded docs now
explain a bit what this really means and what it does not).
Change-Id: I0486715570a9e6fc5d3dc431694d1712875dfe01
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
After 4e796e0b0d we only have blacklisted
passes in the database, and no flaky failures on macOS.
Exception is WinRT, which stays blacklisted.
Change-Id: Ie1c492d20c76d4ba12b3f513ac038f023b864cb1
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Widgets have a default palette and font that is influenced by several
factors: theme, style, QApplication-wide overrides, and the parent's.
If an application sets a font or palette on a parent, then widgets
inherit those settings, no matter when they are added to the parent.
The bug is that this is not true for widgets that have an application-
wide override defined by the platform theme. For those, we need to merge
parent palette and font attributes with the theme, and this is currently
not done correctly, as the respective masks are not merged and inherited.
This change fixes this for fonts and palettes. Children are inheriting
their parent's inheritance masks, combined with the mask for the
attributes set explicitly on the parent. This makes the font and palette
resolving code correctly adopt those attributes that are set explicily,
while leaving everything else as per the theme override.
The test verifies that this works for children and grand children added
to a widget that has a palette or font set, both when themed and
unthemed. Children with own entries don't inherit from parent.
The QFont::resetFont test had to be changed, as it was testing the
wrong behavior. If the child would be added to the parent before the
font property was set, then the test would have failed. Since this
change makes sure that children inherit fonts in the same way, no
matter on when they are added to their parent, the test is now
modified to cover both cases, and ensures that they return identical
results.
[ChangeLog][QtWidgets][QWidget] Fonts and palette settings are inherited
by children from their parents even if the children have application-
wide platform theme overrides.
Change-Id: I179a652b735e85bba3fafc30098d08d61684f488
Fixes: QTBUG-82125
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
Currently QShaderGenerator will crash when encountering some expressions
in input nodes.
For example, this node prototype would make it crash:
"VERTEX_COLOR": {
"outputs": ["color", "alpha"],
"rules": [
"headerSnippets": ["in vec4 vertexColor;"],
"substitution": "vec3 $color = vertexColor.rgb;
float $alpha = vertexColor.a;"
]
}
Change-Id: I37abb8099d376843a4cb13228140467dc1b8f60c
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
It was already possible to declare a node prototype with multiple
outputs, but trying to assign to all those outputs was not possible and
instead resulted in a crash.
It is now possible to declare nodes like this without crashing:
"SEPERATE_XYZ": {
"inputs": ["vector"],
"outputs": ["x", "y", "z"],
"rules": [
{
"substitution": "float $x = $vector.x;
float $y = $vector.y;
float $z = $vector.z;"
}
]
}
Change-Id: I748e77e84c9120dc688c573eee33dc13c6bfbace
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
If a widget backed by a QWindow is moved we need to translate the window
geometry into a position relative to the parent widget. In most cases this
was incidentally working due to widgets backed by QWindows always having
QWindow parents too, so the QWindow position was applicable to the widget
as well. But when Qt::WA_DontCreateNativeAncestors is used this is no
longer the case, and we would end up with a widget geometry that included
the parent positions all the way up to the next native widget.
The updatePos() function has been squashed into handleMoveEvent(), since
we need to ensure the position in the move event sent to the widget is
correct as well.
Change-Id: I55894ad7ab42a6d4d65e446a332ecdd7dcdcc263
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This fixes the shader generation for graphs like this one:
Function0 ------> Output0
(with unbound input)
Input ------> Function1 ------> Output1
With those graphs, createStatements will not return any statement for
nodes Function0 and Output0.
Change-Id: Iec32aa51623e176b03ae23e580f06d14df80a194
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
Ensure that each image plugin really clips within the scaled coordinate
system, as documented. Always clipping from 0,0 wasn't interesting.
Task-number: QTBUG-81044
Change-Id: Ic06fe52f92f719e1ff9c0348f667215e53b60fb0
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QShaderGenerator didn't handle substitutions like
`vec4 $color = mix($color1, $color2, $fac);`
Note that `$color` is a prefix to `$color1` and `$color2`. For the
substitution `QByteArray::replace` was used so if `$color` was handled
first and replaced by `v1`, `$color1` and `$color2` were never correctly
replaced and instead became `v11` and `v12` which caused a crash later
on.
Change-Id: Idaf800fdac468f33c323eb722701da5f8eb918d6
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
By sending it to all top level windows it will make it possible for
non widget based controls to listen for this event if it cares about it
so it can handle translation updates as appropriate.
Task-number: QTBUG-78141
Task-number: QTBUG-82020
Change-Id: I8f35cdcccd81a199ff780c3f4f3d2c663480d638
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
This test fails sporadically on OpenSUSE, with the widget receiving
multiple resize events. Assuming that window management kicks in at
unpredictable moments and changes the geometry of the managed widget
possibly in several steps, we try to turn off all window management
on X11.
Change-Id: I7d2120c02eb870040b2ee94986a2ac5608d5a423
Fixes: QTBUG-66345
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
For graphs like this one:
Input ----> Function1 ----> Output
\
---> Function2
(unbound output)
We would have generated only 2 statements, for Function1 and Output.
This change fixes this by treating Function2 like an output.
Therefore it generates 4 statements: Input, Function1, Output and
Function2.
Change-Id: Iaada40b9b949d771806dd47efad4f7ef2a775b48
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
QUtf32::convertToUnicode() was forgetting to set headerdone when it
dealt with the header (for contrast, Utf16::convertToUnicode() does).
Fixes: QTBUG-62011
Change-Id: Ia254782ce0967a6cf9ce0e81eb06d41521150eed
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Apple changed on macOS 10.14 (Mojave). Windows has always allowed.
Fixes: QTBUG-81905
Change-Id: I572733186b73423b89e5fffd15f12fee3f03c055
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The comment in QNativeSocketEnginePrivate::fetchConnectionParameters()
talked about IPv6 v4-mapped addresses. However, toIPv4Address also
converts the unspecified address (::), which resulted in QAbstractSocket
saying that it had bound to QHostAddress::Any instead of
QHostAddress::AnyV6
Change-Id: I572733186b73423b89e5fffd15f138579c5c0c50
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
So far, objects had no identification, and both gadgets and namespaces
were called "gadget". qmltyperegistrar, however, is especially
interested in the distinction between namespaces and anything else.
Task-number: QTBUG-68796
Change-Id: Ic5739727bdef7766de6e535c6568920198fadb2b
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
We observe this happening on macOS in the CI system, and it might happen
if a VM doesn't get CPU cycles for long enough time so that two timers
time out. Then event processing will process two timer events, and we
overwrite the timerIdFromEvent with the second event.
Instead, skip the test when this happens.
This is an ammendment to 5c520f4b0a
Change-Id: Ibc1169b5458c8dce9d4fe9ce715f49c396e17b86
Fixes: QTBUG-71751
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
...and merge the two overloads of getDouble() in Qt6
Change-Id: I55faa2ff222b41e48889a0ef14dd00a6da691c36
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Make the test operate in its own temporary directory, so that entries
left behind by other test functions don't impact this test.
Also, call QFileSystemModel::sort explicitly; it would otherwise only
be done once through a single-shot timer, and the test processes events
until the model is populated, which might not process that delayed
sorting. Since dirsBeforeFiles tests the sorting algorithm and not
the sorting logic, best to do this explicitly.
In case of sort failure, print diagnostics.
Change-Id: I44c2b82ef1330cc8787aed2b5cbf109ef3a67876
Done-with: Friedemann Kleint <Friedemann.Kleint@qt.io>
Fixes: QTBUG-75452
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This reverts commit 0de6c26ac1.
The patch fixes ambiguity between a getter and a signal by changing the
getter name, but we still have to rename the signal to follow the signals
naming convention.
Revert the commit to keep the getter as is and change the signal name instead.
Change-Id: I67dbb5cada25da473bdd02e71b1e2d9bd03f039e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This allows for instance to show the current UI language in the UI,
or to load additional translations that match the .qm file by other
means.
This is especially useful in the case of QTranslator::load(QLocale(),
...), in which case different language and country combinations might
be tried.
Another option is to inspect the file name via QTranslator::filePath();
however, this is more error-prone, and might also miss information
(if the .qm file name doesn't have a country suffix, or no suffix at
all).
Change-Id: I6f565d53d8f50e21241ccae6c4de264747ac8f81
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Some Qt classes already accept std::chrono durations in their methods
(see, for example, QTimer). The proposed change adds an overload
with std::chrono::milliseconds to QStateMachine::postDelayedEvent().
Change-Id: I360fd2bb54fedc7415e9ec17e096095be3604d41
Reviewed-by: Erik Verbruggen <erik.verbruggen@me.com>
There were a few surprises:
- QByteArray::compare() are missing noexcept (will add)
- ibid., called with non-ascii content and CaseInsensitive fails
(this was discussed on the ML, with tentative agreement that
it's a feature, not a bug; waiting for QUtf8String(View) for a
fix, then).
- As was the case when we did this exercise with the relational
operators, QString(Ref)/QChar is not noexcept (will fix)
These have been QEXPECT_FAIL'ed.
Not much of the cartesian product is implemented at all, yet. These
have been #ifdef'ed with NOT_YET_IMPLEMENTED to see what's still
missing.
Change-Id: I7d9b21e292b98f980aacdc6248e88188f7472ba2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Moving a file to the trash should preferably done via IFileOperation.
However, the implementation on Windows 7 ignores the operation flags
that request the shell not to show any confirmation dialogs or other UI
elements.
SHFileOperation is an old API that doesn't show any UI, but has the
limitation that it doesn't report the location of the file in the trash
after the move. So an application cannot restore the file, but the user
can do so via Explorer.
Overall, the better compromise is to not have dialogs at the expense of
not being able to report the new path. This allows us to run the unit
test on Windows 7 as well.
Change-Id: Ib8e651a69e2c6750f668b52d2a70925d156cc8ae
Fixes: QTBUG-81927
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
On macOS, the registerTimer test case fails frequently, and blocks
valid integrations. With this change we try to detect the condition
and skip the test.
Change-Id: Id2065f606abfd431971becf63034a4c1f0fdb9e5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The font change in QComboBox might cause incorrect appearance of popup
menu since it doesn't notify popup menu to relayout itself
Fixes the issue by send font change event to the item view of popup
menu when received a font change event in QComboBox
Fixes: QTBUG-75846
Change-Id: I4821015cca95a7e233a22262596a6fbf27f10aef
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The test orchestrator shouldn't have to deal with the individual options
needed for each test.
Change-Id: I78bbf4850cc649e625bd08a7aedf02267ba1314d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Change-Id: I2fd7a39684bde44d82c4d877086f606413d68520
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
These tests are apparently not run at the moment, otherwise they would
have failed to even start, but they should definitely not have the tst
prefix.
Change-Id: Iafcec2764ebb3570e6bc6ebfba27d92a94639893
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Those types are used as properties of Q(Date)TimeEdit,
QKeySequenceEdit.
Fixes: PYSIDE-1215
Change-Id: I8b9ffebb8229fff447aa7dd6bee6e037d708333c
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
In tst_QLocale::windowsDefaultLocale(), we configure the long and
short date formats and the short time format eccentrically, then
verify that QLocale::system() does actually get these eccentric
formats. However, we did not configure the long time format (whose
MS-API name doesn't match that of the other formats), so had to rely
on a guess at the system locale's format. That, however, is not
robust; so now configure the long time format, too.
Removed a duplicated test, at the same time.
Fixes: QTBUG-36306
Change-Id: I04dc22c7eb1b58af55412b598873868f79e9c74f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
If we had one test function that just did
tst_Mouse::f1()
{
QTest::mouseMove(w, QPoint(0,0));
}
and another test function that did
tst_Mouse::f2()
{
QTest::mouseMove(w, QPoint(500,500));
}
their corresponding event timestamps were only 1 apart from each other.
This meant that any code that tried to estimate the velocity of a mouse
cursor would get a really high velocity estimate inside f2(). This would
come as a surprise to most people. So to avoid this, we add a 500 ms
timestamp delay between each test function call.
In theory this could also prevent generating a mouseDoubleClickEvent
when a pair of test functions containing a press-release sequence was
run, but there is a separate pre-existing mechanism to handle that case.
Change-Id: Icd4fc35853c09f080466d22411208c7b5c4174b5
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Due to the nature of QFile just operating on a file path, this also
works for paths that are actually directories.
The test covers files from different locations on which this
operation should typically succeed, but tries to handle the case
where trashing files will fail because of the file system
structure.
On Windows 7, running the test will open a confirmation dialog as
the implementation of IFileOperation doesn't respect the various
flags. This might depend on the specific Windows 7 patch level,
and the option to always use SHFileOperation on that platform needs
to be evaluated further.
[ChangeLog][QtCore][QFile] Introduce QFile::moveToTrash to allow
applications to move files to the trash.
Change-Id: I45019040c25b30f7db293b6933c63aca2f319514
Fixes: QTBUG-47703
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
This way we produce valid xml also for the no-proxy case.
Change-Id: I5a277255d22c3814fe463c0cd013c04ddc6ad919
Reviewed-by: André Hartmann <aha_1980@gmx.de>
When QWidget is being destroyed, its winId is cleared, and
a QEvent::WinIdChange is sent. If a listener of this event
reacted by calling winId() again, we might crash.
A crash can be observed when this child widget is destroyed in dtor of its parent.
E.g. here is a hierarchy of widgets:
1:QWidget
2:QObject
3:QWidget
4:QWidget
If a listener subscribed for WinIdChange events from (4),
and there is a connection to destroy (4) when (2) is destroyed.
This will lead to infinite loop:
1. QWidget::~QWidget
2. QWidget::destroy
3. QWidgetPrivate::setWinId(0)
4. QCoreApplication::sendEvent(q, QEvent::WinIdChange);
5. eventFilter
6. QWidget::winId
7. QWidgetPrivate::createWinId (this=0x555555957600) at kernel/qwidget.cpp:2380
8. QWidgetPrivate::createWinId (this=0x55555596b040) at kernel/qwidget.cpp:2387
9. QWidget::create (this=0x5555558f2010, window=0, initializeWindow=true, destroyOldWindow=true) at kernel/qwidget.cpp:1163
10. QWidgetPrivate::createWinId (this=0x55555596b040) at kernel/qwidget.cpp:2387
11. QWidget::create (this=0x5555558f2010, window=0, initializeWindow=true, destroyOldWindow=true) at kernel/qwidget.cpp:1163
12. QWidgetPrivate::createWinId (this=0x55555596b040) at kernel/qwidget.cpp:2387
Fixes: QTBUG-81849
Change-Id: Ib4c33ac97d9a79c701431ae107bddfb22720ba0d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Back-ends need to catch NULL data so as not to call system APIs with
invalid pointers.
[ChangeLog][QtCore][QCollator] Fixed a regression introduced in 5.14.0
that caused QCollator not to operate with default-constructed QStrings
and print a warning on Windows.
Fixes: QTBUG-81673
Change-Id: I2eafe1e188b436afcca3cf2ecdf98bba707c44c9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This ammends 601ce9e08a, which added
a new test case for the internal Qt APIs. The test was not
getting executed by coin as it wasn't included in the io.pro file,
and trying to fix that generates link errors on Windows, since these
internal APIs depend on other internal APIs.
Short of bootstrapping much of QtCore into this test case, the only
sensible option is to remove this test case again, and cover the
testing when the public API is added in a follow up commit.
At the same time, address those failures that were discovered
on platforms that could build the test, and fix compilation on
iOS platforms in Coin.
Change-Id: Id31b43c9df9f205476c48bccb6b87c7a53ed15c5
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
This particular test may serve as sample code in various materials in
the future, therefore it is highly beneficial if it is kept in good shape.
Make it easier to read, more compact, and split up among the natural
boundaries of the functionality (global setup in main, window+swapchain
management in Window, graphics resource setup and draw call recording
in HelloWindow).
Change-Id: I2451d3961a01131dcbffe66baf23d2cf9bfd077f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
On macOS it's possible to configure the system locale to not do digit
grouping (separating "thousands", in most western locales); it then
returns an empty string when asked for the grouping character, which
QLocale's system-configuration then ignored, falling back on using the
base UI locale's grouping separator. This could lead to the same
separator being used for decimal and grouping, which should never
happen, least of all when configured to not group at all.
In order to notice when this happens, query() must take care to return
an empty QString (as a QVariant, which is then non-null) when it *has*
a value for the locale property, and that value is empty, as opposed
to a null QVariant when it doesn't find a configured value. The caller
can then distinguish the two cases.
Furthermore, the group and decimal separators need to be distinct, so
we need to take care to avoid cases where the system overrides one
with what the CLDR has given for the other and doesn't over-ride that
other.
Only presently implemented for macOS and MS-Win, since the (other)
Unix implementation of the system locale returns single QChar values
for the numeric tokens - see QTBUG-69324, QTBUG-81053.
Fixes: QTBUG-80459
Change-Id: Ic3fbb0fb86e974604a60781378b09abc13bab15d
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The "title" in markdown is the tooltip, not the name attribute of
a link. Also, tell the char format that it's an anchor.
Change-Id: I2978848ec6705fe16376d6fe17f31007cce4b801
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The reporter was probably named 'xunit' based on the historical use of
xUnit to refer to testing frameworks derived from Smalltalk's SUnit.
These frameworks typically added their own prefix, e.g. JUnit for Java,
RUnit for R, etc.
The most popular of these was the JUnit framework, and the corresponding
XML output produced by the Ant built tool became somewhat of a de facto
standard, which is probably why we chose to model our reporter after it.
Nowadays however, naming it 'xunit' is problematic as there is actually
a testing famework named xUnit.net, typically shortened to, you guessed
it: xunit.
Test report consumers will typically have a junit mode, and an xunit
mode, and the latter could easily be mistaken for what testlib outputs,
unless we clarify this.
The clarification also allows us to safely extend our support for the
JUnit XML format to incorporate some elements that are nowadays common,
but where we are lagging behind the standard.
[ChangeLog][QTestLib] The formerly named 'xunitxml' test reporter has
been renamed to what it actually is: a JUnit test reporter, and is now
triggered by passing -o junitxml to the test binary.
Change-Id: Ieb20d3d2b5905c74e55b98174948cc70870c0ef9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Partially reverts 4f077b7e5f.
Can't overload with forwarding references and lvalue references. Use a single
forwarding reference overload, but take care of not trying to create a
QScopeGuard of reference type and forward instead of moving.
Add tests to ensure calling with both lvalues and rvalues is possible.
Change-Id: Ia034afe0a8feb08246c2c7c154a85cae37421c98
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The change to using setters left a quirk from the previous un-mutable
design where you couldn't set values on an invalid color space and
create a valid one.
This changes that so it works as expected for an imperative API, but
is also needed for the declarative QML bindings.
Change-Id: I246cfc38b364b156238151c42c1df82a3f1cc9d3
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This makes it easier to create one without having to create
a derivative class. The patch also adds a path to avoid using
QRunnable directly in QThreadPool.
Change-Id: I9caa7dabb6f641b547d4771c863aa6ab7f01b704
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
[ChangeLog][QtCore] QCalendar::monthsInYear(QCalendar::Unspecified)
now returns maximumMonthsInYear(). QCalendar::daysInYear() now makes
clear that its handling of unspecified year is undefined.
Change-Id: Ifef8723193868c666f6afeb7f190af4929d30dea
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It needed re-implemented in terms of the new API (in case QTime(0, 0)
was skipped, on the date in question, by a spring-forwrd), which makes
it redundant (and supports choice of spec and zone or offset, which it
did not).
Change-Id: I1e3c3e794632c234f254be754ed6e4ebdaaaa6bc
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
These tests fail locally, and have been reported to
fail on the CI system.
Change-Id: Ia76bb15c288af4171ebe47b3c30f3651a63df3f2
Task-number: QTBUG-75786
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
With Class Template Argument Deduction users might want to use the constructor
itself instead of a separate helper function. In both cases it's possible to let
the compiler deduce the template arguments.
Try to make the usefulness of the helper function in the absence of CTAD still
clear in the documentation.
Change-Id: I9b07983c1fb276a6dd9e7ed4c3e606764e9b68ca
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
This implements the operation for Windows, macOS, and Unix, for now
only as a private API (since QFileSystemEngine is private). This adds
the capability as a testable function; public API to be agreed on and
added in a separate commit.
The Unix implementation follows the freedesktop.org specification [1]
version 1.0.
[1] https://specifications.freedesktop.org/trash-spec/trashspec-1.0.html
On macOS and Windows, native APIs are used, with each having some
limitations:
* on macOS, the file in the trash won't have a "put back" option,
as we don't use Finder automation, for the reasons provided in the
comments
* on Windows, we might not be able to use the modern IFileOperation
API, e.g. if Qt is built with mingw which doesn't seem to provide
the interface definition; the fallback doesn't provide access to
the file name in the trash
The test case creates files and directories, and moves them to the
trash. As part of the cleanup routine, it deletes all file system
entries created. If run on Windows without IFileOperations support,
this will add a file in the trash for each test run, filling up
hard drive space.
Task-number: QTBUG-47703
Change-Id: I5f5f4e578be2f45d7da84f70a03acbe1a12a1231
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
In Qt6 QNAM will no longer use bearer in any way so we deprecate it now.
Also mark bearermanagement-conditioned sections for removal in Qt6,
the _q_networksession property is part of how QNAM passes the
QNetworkSession around.
Task-number: QTBUG-81609
Change-Id: I04aad9dd96482c6822dffba1b9af7aa58961149c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
If a widget inside a QGPW has a proxy focus, the code would keep
sending focus in events to the proxy even if the proxy was already
focused. Amend the check in place to prevent this from happening.
Change-Id: Id28d3bfe4f396da5c9477df713441ca7d506662f
Fixes: QTBUG-51856
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Use nullptr, range-based for and replace typedef by using.
Fix duplicated setting of option. Replace deprecated API.
Change-Id: I2628e8b41e64e9809b2f405dfd2be6bee18b048c
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
On the mac, the push button's bevel doesn't cover the entire widget
rectangle, but is smaller to leave space for focus frame, shadow, and
in general to meet style guidelines. Without this change, a click
anywhere inside the widget would activate the button.
QAbstractButton::hitButton can be reimplemented to limit the area in
which the button is triggered. However, getting the rectangle also
requires an addition to QStyle, so that we can query
QStyle::subElementRect for the actual area the button's bevel covers.
As a side effect, tests that use QPushButton and assume that it
responds to clicks at position 0,0 have to be fixed so that they
don't fail on mac.
Change-Id: I01b60a763bccf39090aee5b2369af300f922d226
Fixes: QTBUG-81452
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This can be used to create custom client side window decorations.
Refactors the xcb implementation to use edges instead of corners and we now use
the last mouse position for `root_x` and `root_y` in the `_NET_WM_MOVERESIZE`
event. Touch has also been changed, so just pick a point that's currently being
pressed.
The workaround for QTBUG-69716 has now been moved to QSizeGrip, as the comment
in the bug report says that it should ideally be fixed at the widget level.
On Windows, we no longer abort when GetSystemMenu returns false. I assume this
code was added to check whether the window didn't have any decorations and not
resize in that case. However, since the point of this patch is to let windows
without native decorations resize/move, it makes most sense to remove the
check.
Adds a manual test, which calls QWindow::startSystemMove and startSystemResize
on touch and mouse events.
[ChangeLog][QtGui] Added API for starting interactive window resize and move
operations handled by the system.
Fixes: QTBUG-73011
Change-Id: I7e47a0b2cff182af71d3d479d6e3746f08ea30aa
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When a new model is set, a valid index is selected. When a model is
reset, this is not the case which is slightly inconsistent. Fix it by
using the same logic to find a valid index when the model is reset
Fixes: QTBUG-80998
Change-Id: I6c167511e199a6664343cf1dc3bcd27c65389bfd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
If available, use a C++17 std::pmr::unordered_set with a monotonic
buffer resource and a 256-byte stack buffer to avoid the per-element
allocations of QSet.
Results on my machine:
RESULT : tst_QStringList::removeDuplicates():"empty":
- 0.00014 msecs per iteration (total: 74, iterations: 524288)
+ 0.000031 msecs per iteration (total: 66, iterations: 2097152)
RESULT : tst_QStringList::removeDuplicates():"short-dup-0.00":
- 0.00043 msecs per iteration (total: 57, iterations: 131072)
+ 0.00013 msecs per iteration (total: 69, iterations: 524288)
RESULT : tst_QStringList::removeDuplicates():"short-dup-0.50":
- 0.00049 msecs per iteration (total: 65, iterations: 131072)
+ 0.00032 msecs per iteration (total: 85, iterations: 262144)
RESULT : tst_QStringList::removeDuplicates():"short-dup-0.66":
- 0.00057 msecs per iteration (total: 75, iterations: 131072)
+ 0.00039 msecs per iteration (total: 52, iterations: 131072)
RESULT : tst_QStringList::removeDuplicates():"short-dup-0.75":
- 0.00064 msecs per iteration (total: 85, iterations: 131072)
+ 0.00048 msecs per iteration (total: 63, iterations: 131072)
RESULT : tst_QStringList::removeDuplicates():"long-dup-0.00":
- 0.083 msecs per iteration (total: 85, iterations: 1024)
+ 0.039 msecs per iteration (total: 80, iterations: 2048)
RESULT : tst_QStringList::removeDuplicates():"long-dup-0.50":
- 0.11 msecs per iteration (total: 58, iterations: 512)
+ 0.078 msecs per iteration (total: 80, iterations: 1024)
RESULT : tst_QStringList::removeDuplicates():"long-dup-0.66":
- 0.13 msecs per iteration (total: 70, iterations: 512)
+ 0.10 msecs per iteration (total: 53, iterations: 512)
RESULT : tst_QStringList::removeDuplicates():"long-dup-0.75":
- 0.16 msecs per iteration (total: 86, iterations: 512)
+ 0.13 msecs per iteration (total: 69, iterations: 512)
When interpreting the data, take into account that each iteration
contains _also_ a deep copy of the QStringList d/t the detach from
'input'.
The pattern is used elsewhere in Qt, so I've put the class that
implements the seen set into a private header file and used in some
other places I found.
Change-Id: I1f71a82008a16d5a3818f91f290ade21d837805e
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
When the tested widget has a focus proxy, then we should check if the
current focus widget is not the same as that focus proxy before setting
it to be the widget that gets focus. This ensures that when back-tabbing
from a widget like QDoubleSpinBox that it will not get stuck inside that
widget and will back-tab to the next correct one.
Fixes: QTBUG-81097
Change-Id: I3f689c7715da7f3ce8c3d2f616041528f5778a2f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When closing a popup (submenu) triggers closing another popup (the menu)
programatically it can happen that QApplicationPrivate::popupWidgets is
destroyed. Therefore we have to check if popupWidgets is still valid
after the focus change event was delivered.
Fixes: QTBUG-81222
Change-Id: Ide3a6897e43f389d396a80d8b158f7c8eb04e3aa
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
There's no point at keep raising errors after encountering the
first malformed attribute.
Change-Id: Idb37e577ea96c3bd850b3caf008fe3ecd57dd32e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is meant to correspond to required properties in QML.
Change-Id: I2645981e13f7423bc86b48370c165b3cfe2aaa62
Task-number: QTBUG-81561
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
If support for regular expression is disabled, fixed string can
still be used.
[ChangeLog][QtCore][QSslCertificate] Add overload of fromPath that does
not make use of QRegExp and deprecate the QRegExp variant.
Task-number: QTBUG-72587
Change-Id: I507d8941cc7d70166da0948375dc421fe5e7d967
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
They are now version 4, which is hopefully the final format,
relying on nothing but QDataStream.
Except for the qshader autotest which tests all the 1..4 versions
and so needs appropriate test data.
Also unifies the batch file naming.
Change-Id: Iec478be86d14dbec7ffb9d5f9b62c14fca5d7c9e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
We don't know which versions these blacklistings actually apply on
unless we actually get macOS 10.14 and 10.15 into the CI and running
tests, so let's start with that, and then granularize the blacklists
after that.
Task-number: QTBUG-75786
Change-Id: Id79642afa50cb20efa2cd209286b6933918d3a4a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
During 556712f511 a small regression was
introduced which set a wrong value for QStyleOptionTab::position.
Fixes: QTBUG-81393
Change-Id: Ie8c66186b1b79c97bf77c7b139e08840233b7b66
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Same as other versions of MSVC
Fixes: QTBUG-80328
Change-Id: I05c5ffe6d36e0cdfb781080a736c90b6a6d4b2ba
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
[ChangeLog][QtCore][QResource] Added uncompressedSize() and
uncompressedData(), which will perform any required decompression on the
data, prior to returning (unlike data() and size()).
Change-Id: Ief874765cd7b43798de3fffd15aa053bc505dcb1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
They overlapped and the latter had duplicated code, so make them into
a single data-driven test. At the same time, replace the '-' at the
start of the expected string with QLocale::negativeSign(), since the
test fails otherwise when LC_NUMERIC=nb_NO on Linux (Debian/testing).
Change-Id: I051c75abff16b2e6f8278fcb152b6bde14c71f9a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test expects a very explicit list of events during show, but on
macOS we also get an InputMethodQuery event as a result of the window
becoming active. The test needs to be written significantly to support
these kind of platform differences.
Change-Id: I395c1e9e4e9baf7d9f88f0d067586fc15afb9a16
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
For some reason the firstChild gets the focus when clearing the focus.
This seems to be timing dependent, as removing the 30ms qWait 'fixes'
the issue. So does a processEvent call before minimzing. Both of these
require further investigation.
Change-Id: I62833a5541712f97dc24bc63384fa4c051096537
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
There's a timing issue that affects the position of the vertical
scrollbar when scrolling by pixels.
Change-Id: I29d73574785be539a5870b498a902b1aba887e9c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It's not clear why this is failing, but we need to blacklist it so that
we can move over to testing macOS 10.14 and 10.15 in the CI.
Task-number: QTBUG-75786
Change-Id: I208d5af92406c5da8d0210e0188568466b78b2a9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The combobox popup can overlap a little with the button, and that's the
expected behavior.
Change-Id: I245bfce85cb5ee661ceb51dbe0d844492878a2bc
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We were being inconsistent in how we handled this, some tests skipping
while others using QVERIFY. It makes more sense to skip the tests, since
the problem is a missing pre-condition of the test, not the test itself
being bad or exposing real failures in the implementation.
Change-Id: I20eacfe12dbce0b0d926e48cbe2d2772819fa4a5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The logic is now mostly handled in QGuiApplication, with QApplication
only dealing with the widget-specific palettes and interaction between
the style and the palette.
The application now picks up changes to the platform theme and will
re-resolve the current application palette appropriately. This also
works even if an explicit application palette has been set, in which
case any missing roles are filled in by the theme.
The palette can now also be reset back to the default application
palette that's fully based on the theme, by passing in the default
constructed palette (or any palette that doesn't have any roles set).
This is also correctly reflected in the Qt::AA_SetPalette attribute.
Conceptually this means QGuiApplication and QApplication follow the
same behavior as QWidget, where the palette falls back to a base or
inherited palette for roles that are not set, in this case the theme.
Behavior-wise this means that the default application palette of the
application does not have any roles set, but clients should not have
relied on this, nor does QWidget rely on that internally.
It also means that setting a palette on the application and then
getting it back again will not produce the same palette as set,
since the palette was resolved against the theme in the meantime.
This is the same behavior as for QWidget, and although it's a
behavior change it's one towards a more sane behavior, so we
accept it.
[ChangeLog] Application palettes are now resolved against the platform's
theme palette, the same way widget palettes are resolved against their
parents, and the application palette. This means the application palette
reflected through QGuiApplication::palette() may not be exactly the same
palette as set via QGuiApplication::setPalette().
Change-Id: I76b99fcd27285e564899548349aa2a5713e5965d
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
...but keep support for deserializing for all older versions in order to play
nice with existing .qsb files.
The usage of binary JSON and then CBOR is a historical artifact: relying
on the QJsonDocument (which we generate for purposes unrelated to binary
serialization) was a convenient shortcut. However, writing to and
reading from a QDataStream instead (which QShader already does) is trivial.
In order not to be limited by potential CBOR requirements in the future,
take it all into our own hands.
Extend the qshader autotest accordingly.
Task-number: QTBUG-81298
Change-Id: If0047b659bd6601ca47b5bbbce1b719630cde01e
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
What's more, demonstrate two types of rendering to a cubemap:
one by one to each face, and by attaching all faces as color
attachments in one go.
Both are used by Qt Quick 3D in connection with shadows, so this
proves that the same is possible to implement with QRhi.
Task-number: QTBUG-81261
Change-Id: I5c7077224d7cae0dd6ea02ac30a9e6f9f1f0c229
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Uses the two compute shaders from Qt Quick 3D. Demonstrates
and tests both RGBA16F textures and using them (and doing
load/store with mip levels individually) in combination with
compute.
Task-number: QTBUG-81213
Change-Id: I3f0f250d5997a26c857b7c45517684c63b44e58e
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
An empty QTextDocument already contains a block; so when the formatting
is fully determined, if the document is still empty, then instead of
inserting a new block, we can set formatting on the cursor, which
affects the pre-existing block, before inserting text. This avoids
leaving a blank line (the default block) above the inserted content.
Fixes: QTBUG-81060
Change-Id: I14e45e300a602493aa59680417d74d4c2b25862d
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Use QStringIterator rather than indexed loops. This fixes handling of
non-BMP code points (which may be lower or uppercase, see the test).
Change also the semantics of the functions, adopting Unicode §3.13
definitions: a string is lowercase/uppercase if it's equal to its
own toLower/toUpper folding.
As a side effect, empty strings are now correctly reported to be
lowercase AND uppercase.
[ChangeLog][Important Behavior Changes] The semantics of
QString::isLower() and QString::isUpper() have been changed to match the
Unicode specification. Now lowercase (resp. uppercase) strings are
allowed to contain any character; a string is considered lowercase
(resp. uppercase) if it's equal to its own toLower() (resp. toUpper())
folding. Previously, a non-letter character would make the string not
lowercase nor uppercase, and the mere presence of an uppercase (resp.
lowercase) letter would make isLower() (resp. isUpper()) return false,
even if the letter wouldn't change under case folding. As a
consequence, now empty strings are lowercase and uppercase.
[ChangeLog][QtCore][QString] Fixed a number of bugs of
QString::isLower() and QString::isUpper(). Empty strings are now
correctly reported to be lowercase (resp. uppercase), and strings
containing code points outside the BMP are now correctly handled.
Note that the behavior of these functions has also been changed.
Change-Id: Iba1398279a072399a9f21295fe75f6e414f3f813
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To disambiguate &QSslSocket::sslErrors() expression. Add a new
getter - sslHandshakeErrors().
[ChangeLog][Deprecation Notice] QSslSocket::sslErrors() (the getter) was deprecated and superseded by sslHandshakeErrors()
Task-number: QTBUG-80369
Change-Id: I9dcca3c8499800c122db230753dc19b07654f8a2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QLocalSocket::error is overloaded as a signal and an accessor (for the
error reported by the signal). This means connecting to the signal using
a pointer to member function would require ambiguity resolution. We
deprecate the old accessor (to be removed in Qt 6) and introduce a new one -
'socketError'.
[ChangeLog][Deprecation Notice] QLocalSocket::error() (the getter) is deprecated; superseded by socketError().
Task-number: QTBUG-80369
Change-Id: Iab346f7b4cd1024dee9e5ef71b4b7e09f6d95b12
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The one that is a getter for the last error found. This is to disambiguate
the expression '&QAbstractSocket::error'. Introduce a new member-function
socketError as a replacement.
[ChangeLog][Deprecation Notice] QAbstractSocket::error() (the getter) is deprecated; superseded by socketError().
Task-number: QTBUG-80369
Change-Id: Ia2e3d108657aaa7929ab0810babe2ede309740ba
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The windows filesystemwatcher did not watch for attribute changes for
directories (e.g. hidden flag) so it was not in sync with other
backends. Fix it by adding FILE_NOTIFY_CHANGE_ATTRIBUTES to the watch
flags when watching a directory.
[ChangeLog][QtCore][QFileSystemWatcher] Fixed a bug that caused QFSW not
to watch for attribute changes on Windows. Now it will correctly report
when files and directories become hidden or unhidden, for example.
Fixes: QTBUG-80545
Change-Id: I31767a0da899963e3940b4f5b36d1d581e6aa57c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The test was previously tracking all Change events,
which made it fragile.
Change-Id: I17872341237009a9a0a2ad2fd5482f917991d7b2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The actual logging code, qt_message_print(), uses toLocal8Bit(), so
testing by comaring with toUtf8() isn't robust.
Change-Id: I7d6614e4af8c679674dbbf4ff47a88b2b75fc2dc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
