QVersionNumber will gain a small-version-number optimization, which
stores sequences of less than 4 (32bit) or 8 (64bit) 8-bit signed
segments inside the class instead of a QVector. Make sure the tests
cover those cases, too.
Change-Id: If1d875c75d284908756b305f767a7218cab5226f
Reviewed-by: Keith Gardner <kreios4004@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
%{threadid} should have been %{qthreadptr} but we forgot to make the
change for Qt 5.4. So do it now.
[ChangeLog][QtCore][Logging framework] %{threadid} now prints the real
thread ID. On Linux, OS X, iOS, FreeBSD and Windows, the value is unique
system-wide. On other systems, it will print something that may be
process-specific (the value of pthread_self(3)). To print the pointer
to QThread::current(), use %{qthreadptr}.
Change-Id: Ie383ff864a11966cf5d095b966a30ace65d34ee6
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The change 35bc3dc45a moved some padding out
of QTextureGlyphCache into the font engines directly, however this was not
done for the DirectWrite font engine so it caused a buffer overrun.
Task-number: QTBUG-41782
Change-Id: I4e643159036f06c5edd8a742dc6694d517a47826
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
... which is the module-wide include, bringing in the entire QtCore.
Change-Id: I5cd872efa4562917fc4e3850809cb7595710c43a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This has been deprecated since QDBusContext was introduced (Qt 4.3). So
it's time to remove the functionality.
[ChangeLog][Important Behavior Change] QDBusConnection::sender()
(deprecated since Qt 4.3) has changed to always return an invalid
QDBusConnection. To know what connection the incoming call was received
from, use QDBusContext.
Change-Id: I355efb82c14e54ed718c8f892d8267e727b19118
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
There's a change in Qt 5.4.0 that makes Qt compile with its own set of
D-Bus headers, which means QT_CFLAGS_DBUS may be empty. Thus, we can't
compile or link if we're using the actual libdbus-1 API to build the
test.
This commit makes these unit tests use the same dynamic loading
mechanism.
Change-Id: I56b2a7320086ef88793f6552cb54ca6224010451
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
The error of "Not connected".
This incidentally solves a crash when QDBusServer().lastError() is
called but libdbus-1 couldn't be found.
Change-Id: Id93f447d00c0aa6660d4528c4bbce5998d9186a8
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
On the unit test side, everything is sequential: we first ask for the
connection, verify that it is connected, then ask the remote side via
the session bus if it is connected. Unfortunately, the remote site may
handle things in a different order: it may handle the incoming function
call to "isConnected" before doing accept(2) on the listening socket.
So, instead, make the local side block until the connection is received
on the other side. On the remote, we don't block, instead we use the
feature of delayed replies.
Change-Id: Ie386938b8b39dd94a9d7e5913668125fb4a3c7da
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Skip the tests that require building and deploying an external
command line application, since that's not how we do things on
Android, and it's really not very relevant for that platform.
Change-Id: I2c1985687e25fb0cf124b1d57c8ba60e37d2ff96
Reviewed-by: BogDan Vatra <bogdan@kde.org>
On Android the POSIX implementation of QCollator is used, and
this does not support setting other locales than the default.
Change-Id: I25d23949341fc555e8be4f6836ae68cc8813cc46
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Include test data in qrc so it can be found on Android.
Change-Id: Iaca8422120f1ef842aafeb0cc209cb9fdd70f05f
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Bundle test data in qrc on Android. Extract it, as the tests
expect to find it in the file system.
Change-Id: I251eca3c23141a608b1cbac5ee0b7164c068f9b4
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The failures will be printed in red color.
Use -f param to stop on fail.
Change-Id: Ife58f9264a9ac859d739842c6d1359acde807ce7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
The orientation is unsigned short, read it as such. In
JPEG-files created by Ricoh/Pentax cameras, the data is saved in
Motorola format. Reading the wrong data size will produce invalid
values when converting the byte order.
Change-Id: I8f7c5dc5bfc10c02e090d3654aaefa047229a962
Task-number: QTBUG-43563
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
QFileSystemWatcher does not signal directoryChanged() when files are
modified in a watched directory. QTBUG-8945 was closed with the
decision that it should not signal. Updating the docs and tests to
reflect this fact.
The test code that is being changed is a partial revert of Qt4 commit
1428cc6d71a65c1ac7123c9c4cc3cfaf225cceed. It appears that Symbian
supported directoryChanged() on modification, hence why the check
was for 0 or 1.
Change-Id: I04320c68f227ca338ce65e525956ee201fd50699
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
This is in preparation of adding more qHash()-related tests.
Change-Id: Iae65bf8b123e1d6ac6d1eb34d74ba4eb9df8173c
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Under DBus it is possible to have methods and signals with the same name
or have methods which are reserved c++ keywords.
For example the logind session interface has a signal and method both
called Lock.
This patch allows generated methods to use a different method name
specified in the annotation that the original DBus name in the DBus
interface in a similar manner to how one can rename accessors.
[ChangeLog][QtDBus] Add annotation org.qtproject.QtDBus.MethodName to allow
autogenerating C++ methods with different names to the original DBus method
Change-Id: I08bbe77554fbdd348e93f82d45bab0d75d360c27
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Linux gracefully allows us to do that and treat the v6 socket as if it
were v4. Other OS (notably OS X) aren't so forgiving.
Change-Id: I13dd3274be2a4b13e8b1eef93cbc2dd17b648f96
Reviewed-by: Richard J. Moore <rich@kde.org>
We already let enter/return key presses to reach text edits instead
of closing the editor. Do the same for tab/backtabs.
[ChangeLog][QtWidgets][Important behavior changes] QItemDelegate will
now not close a QTextEdit/QPlainTextEdit editor when the tab key
is pressed; instead, the key will reach the editor.
Task-number: QTBUG-3305
Change-Id: Ife9e6fdc5678535c596d1068770b0963134d8d5a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Thorbjørn Lindeijer <bjorn@lindeijer.nl>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Instead of leaking the QLockFile instance, which causes
leak-checkers to emit false positives, simply call exit(),
which doesn't run the destructors, yet doesn't lead to
leak-checker warnings.
Change-Id: Ia61010671e5218ae412e2bcf873e66255a2c5a99
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
So we can get the output when running with QDBUS_DEBUG=1.
Change-Id: I6a6b8e0d82727c522914fb90a7ce594c86307d8f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Instead of killing them outright (and note that terminate() doesn't work
on Windows), ask them nicely to exit on their own. This way, if we run
them in valgrind, valgrind gets a chance to print the leak check output
and summary.
Change-Id: Ib6cc8d4560ff0bf255f94980eb220e97592c00f0
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
The ROUND function for PostgreSQL only accept NUMERIC field as argument
Change-Id: I0c3753bfe4167cd47158e21b407cca8771816104
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Added support on QDateTime::fromString to read correctly dates on ISO
format with Time zone designators at format [+-]HH
Change-Id: Ied5c3b7950aee3d0879af0e05398081395c18df5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
This patch adds correct timezone support in PSQL plugin. Prior to this
patch, no timezone support was provided, so only the following case
worked :
* using local time in both client application and postgresql server
* datetime were using second precision
This patch tries to take care that postgresql has two different
datatypes for date time, respectively :
* timestamp with time zone
* timestamp without time zone
Both are internally stored as UTC values, but are not parsed the same.
* timestamp with time zone assumes that there is a time zone
information and will parse date time accordingly, and then, convert
into UTC before storing them
* timestamp without time zone assumes that there is no time zone
information and will silently ignore any, unless the datetime is
explicitly specified as having a time zone, in case it will convert
it into UTC before storing it
Both are retrieved as local time values, with the following difference
* timestamp with time zone includes the timezone information
(2014-02-12 10:20:12+0100 for example)
* timestamp without time zone does not include it
The patch does the following :
* parse the date retrieved by postgresql server using QDateTime
functions, which work correctly
* always convert the date to UTC before giving it to postgresql
* force time zone so that timezone information is taken into account
by postgresql
* also adds the milliseconds when storing QDateTime values
The following configurations are tested to work :
* client and server using same timezone, timestamp with or without tz
* client and server using different timezone, timestamp with tz
The following configuration will *not* work :
* client and server using different timezones, timestamp without tz
Because data will be converted to local time by the postgresql server,
so when returned it will be different from what had been serialized.
Prior to this patch, it gave the illusion to work because since TZ
information was lost, time was stored as local time from postgresql.
Lots of inconsistencies occurred, though, in case client tz changes...
I don't expect this to be an issue since having different TZ in server
and client and *not* handling this is a broken setup anyway.
Almost based on changes proposed by julien.blanc@nmc-company.fr
[ChangeLog][QtSql] Added timezone support for datetime fields in PSQL
Task-number: QTBUG-36211
Change-Id: I5650a5ef60cb3f14f0ab619825612831c7e90c12
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
This covers the only real additions over QVector: push and pop. Really, there
isn't too much specific to benchmark here, but we're interested in one specific
case: that of pushing and popping a single item repeatedly.
With the current QVector behavior, this causes constant deallocation, which
makes it morbidly slow. This behavior will be reviewed in a subsequent commit.
Results (not that anyone really cares) for me:
PASS : tst_QStack::qstack_push()
RESULT : tst_QStack::qstack_push():
1.9 msecs per iteration (total: 61, iterations: 32)
PASS : tst_QStack::qstack_pop()
RESULT : tst_QStack::qstack_pop():
8.2 msecs per iteration (total: 66, iterations: 8)
PASS : tst_QStack::qstack_pushpopone()
RESULT : tst_QStack::qstack_pushpopone():
80 msecs per iteration (total: 80, iterations: 1)
Change-Id: I3530888abbfcfcef39318d6be6d5b07306a4704e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The interface macro needs to be in the Qt namespace, otherwise the
template specialization in Q_DECLARE_INTERFACE fails.
Task-number: QTBUG-41959
Change-Id: I818da5ba8460219d73c0d248ee410ac92f7498f4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Stephen Kelly <steveire@gmail.com>
We want to use "localhost" if the server's address is "any", as some OS
can't send datagrams to "any" (e.g., OS X and FreeBSD).
Change-Id: I1004bc2282e7f930cdb7ed394aa9f4b5a1cfcf82
Reviewed-by: Richard J. Moore <rich@kde.org>
On my Mac Mini, port 5000 is in use, which means the broadcasting test
fails.
Change-Id: Ifb0883263e277f388342430349ea7315d42f324a
Reviewed-by: Richard J. Moore <rich@kde.org>
It was unconditional. Someone forgot to check for IPv6 support before
skipping IPv6 tests.
Change-Id: I7b11528ad02560f0db9defde3c64f76f48a6c1f8
Reviewed-by: Richard J. Moore <rich@kde.org>
Fix indention, add empty line as separator, undef a local macro.
Change-Id: Ie0d8529322f87ca2bdedb9a7f2f4cf9f463a6e12
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Split off default-value check from getSetCheck().
This is in preparation of extracting getSetCheck_data().
Change-Id: I869c34014a92e29a07dc08584a93a4cbba372518
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QUdpSocket doesn't support binding to QHostAddress::Any and then joining
an IPv4 multicat group since QHostAddress::Any is really an IPv6 socket
with v6only = false. The test did check this case, but failed to ignore
the warning.
Change-Id: I62d782408319a6e566e0ff1a6081b706ac1f669c
Reviewed-by: Richard J. Moore <rich@kde.org>
With IPv6, you cannot bind to a multicast address. You need to bind to a
local address only. The previous tests either checked this or didn't
check the result of bind().
Change-Id: Ief70887d8988fc1bc4394cf6ff34b5d560e5748e
Reviewed-by: Richard J. Moore <rich@kde.org>
[ChangeLog][QtCore][QThreadPool] Added QThreadPool::cancel() which allows
removing from the job queue a job that hasn't been started yet.
Change-Id: Ib8f1c1f32a34f5eec8338c641d820b928e470164
Reviewed-by: Nick Shaforostoff <shafff@ukr.net>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Sending 100*8 packets of each type of message is WAY overkill. That's a
stress test without limiting. My Linux system starts reporting EAGAIN on
the socket, so reduce the amount of data sent.
Change-Id: I153f44cf3b91d37526dac580b400114cc80b1769
Reviewed-by: Richard J. Moore <rich@kde.org>
IPv6 has no such thing, so don't try to bind to an IPv6 address to send
broadcasts (even though that works) and it's a poor idea to bind to IPv6
to receive broadcasts. Moreover, skip any IPv6 network addresses
(broadcast() is invalid).
Change-Id: I2829b042c000158565adfd92db682f37d67dacae
Reviewed-by: Richard J. Moore <rich@kde.org>
If you don't have /etc/lsb-release, you'd get
sh: line 0: [: =: unary operator expected
Change-Id: Idb5c79f799879e4d32cd640ef74fb388227f831e
Reviewed-by: Richard J. Moore <rich@kde.org>
It doesn't make sense because there is no command to ask the proxy
server to join a multicast group. At best, we could write a datagram via
proxy without joining, but we definitely can't receive.
Change-Id: Icc6b54572a053fb7821dfca1f4111f2046ff8686
Reviewed-by: Richard J. Moore <rich@kde.org>
Behavior will agree with the docs.
[ChangeLog][QtGui][QWindow] lastWindowClosed will be emitted even if
quitOnLastWindowClosed is not set
Task-number: QTBUG-32956
Change-Id: I7bb269d53894859fee27e171eea7ad472ea86af0
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
This is a temporary measure while the Qt CI system is updated to have
the correct D-Bus configuration. Once it is fixed, this commit should be
reverted, so that we don't run into the situation in which the tests
aren't getting run on some configurations and we never know about it.
Change-Id: I7192d4d95a60dcb63acfa6cc90bfdc58592b0664
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
The /home path doesn't exist on Android, so it doesn't work as
a non-writable current dir. Instead we use /data on Android.
Change-Id: Ib779f60822da1bef421a16a00c1030245a8c5b90
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The qtlogging.ini file needs to be detectable by QFINDTESTDATA,
so we put it in a qrc file on Android.
Change-Id: I5fb0217098c56f2b2e99ab8d1642c4a7904b18d1
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This test requires building a console application first, deploying
this as part of the APK and then being able to execute the
bundled file from the main application. Since IPC is a limited
use case on Android, we just skip this test instead.
Change-Id: Ie68e495ff64b69e7027924291a411b5de0e2da76
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Test requires that tst_qiodevice.cpp is available on file system,
but since we're not able to deploy directly to the file system
on Android and since we want to actually test file system access,
we bundle it in qrc and copy it out during initialization.
Change-Id: Ida2b5bf6f1dcd43bc740a2b9380352bab5eb6c62
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Some of the tests expect QDir::homePath() and QDir::currentPath()
to be different, so we just set the current path to something
other than QDir::homePath().
Change-Id: Ib048d323f4745369821765230b995a73b8a97145
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This test may not be possible on Android, since the file system
can be mounted with noatime or relatime which means read access
will not be registered.
Change-Id: I40f587e1a1f131ee06f0e3700e908ccaa19c83ce
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Since there's no way to deploy files directly to the file file
system on Android, we put them in a qrc file and extract them
on startup.
Change-Id: I6a42aa5e0372bfd9fb2f7ccfea964c9c3c2e45d8
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This test requires that the resources are also available
in the file system. Since it's not possible to deploy directly
to the file system using Android, we extract the files on
startup instead.
Change-Id: I1d1fe7d62c4c618a89713e3a7d1903e42bfb10b8
Reviewed-by: BogDan Vatra <bogdan@kde.org>
There's no way to install files automatically into the file
system on Android, so to test QDir on the file system, we have
to bundle the files in qrc and then copy them into the file system
on startup. This adds some complexity, but at least it will detect
regressions.
We also need to make sure the current directory is the same as
the data path, since the test assumes this, and /usr/ does not
exist on Android, so we have to use a different path to find the
root path.
Change-Id: I18d79b5ed99a0afff573beb30c61745c403f8991
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This will arbitrarily fail at certain points. Adjusting the
timeouts helps, but it's very unpredictable, so it's better
to do what we do on Windows and just expect-fail the results
that we get.
Change-Id: Ie6033c73539c2dd69115b06096919e173f097367
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Add all test data to resources.
Change-Id: Id42a4c033b75409f65cb4d56ebf1161336b93832
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
We must add all test data to resources.
Change-Id: Ic12f8fce9afb965aff32e7141516c8d223e64491
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
We must add all test data to resources.
Change-Id: I7f9e7650156b174b7c16270d86b78e9408dff254
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Add test data to resources.
Change-Id: Ib8a5688e7caab8434b8f0676f53a2a79ec94b264
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Wait for the subprocess to print "ready" before assuming that it is
ready to receive calls. waitForStarted() will return as soon as the
child is running, but it may not have registered on D-Bus yet.
This also solves the synchronization problem more elegantly than how
tst_qdbusmarshall.cpp was trying to do it.
Change-Id: I548dfba2677cc5a34ba50f4310c4d5baa98093b2
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
The executables are not in the same dir as on Unix, so we need to use
QFINDTESTDATA to find them. The DESTDIR setting prevents qmake from
placing the executables in a "debug/" subdir.
Change-Id: I1d6d10e6f6f109f55fd9809dcf83da0386f38772
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Rohan was right in e88f9a92b7 to stabilize
the test and reset the state, but killing the subprocess is overkill.
All we need is to reset the state in both applications, which includes
disconnecting and reconnecting to the peer, to discard any sent but not
yet received messages.
Change-Id: Ie01392e6e63bd70ef8345217d3fc641ed63c7aba
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
QDBusServer::address() will return an empty QString, which caused the
tests to fail later with no apparent reason.
Change-Id: I86f448dfc67a6cdb27ecda2d490f335766cfaf4f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
This allows the tests to be run on Windows too by using TCP socket
connections instead of requiring Unix sockets. The tests shouldn't have
hardcoded the path, which came from QDBusServer anyway. Now the tests
simply defer to QDBusServer.
This is a slight behavior change for Windows, but not one that should
matter since anyone who was using the default constructor resulted in a
QDBusServer that failed to listen.
[ChangeLog][QtDBus][QDBusServer] Fixed a bug that made QDBusServer's
default constructor try to bind to a Unix socket on non-Unix systems.
Now QDBusServer will attempt to bind to a TCP socket instead.
Change-Id: I2a126019671c2d90257e739ed3aff7938d1fe946
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
No need to loop twice to add the "native" entries, since they are added
by the helper function anyway.
Change-Id: I9caabc6fc4973a90b483840815769b1351947a89
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Basically, introduce a small check for this corner-case situation.
Setting a model doesn't just store a pointer, but also resets the current
index, changes the line edit completion model, and so on, and seems silly
to trigger changes in such cases.
[ChangeLog][QtWidgets][QComboBox] A QComboBox does not reset itself any
more when setting the same model more than once.
Change-Id: If028b36cdfaa5552c156dd900e123ca9a04d4e3d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Added the function pointer to addTransition to take
advantage of the new connect syntax.
[ChangeLog][QtCore][State Machine] Added an addTransition() overload that
takes a pointer-to-member for the signal triggering the transition.
Change-Id: Ic97f7983839217ca0c8484b269d38221cbe804e3
Task-number: QTBUG-40293
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QPA][Xcb] GLX and EGL code paths are now dynamically
resolved, making it possible for one build of a plugin to use both code
paths. Default is to use the GLX code path if available. This can be
overwritten by specifying QT_XCB_GL_INTEGRATION=xcb_egl as an
evnironment variable. Enable qt.xcb.glintegration.debug to get debug log
output of what integration is used
Change-Id: Ia9fa95fcca3d901b91dadb8c98a695fea0ae3b1e
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Put also processing of control activation into initial timer check for possibly
pending mouse release event.
[ChangeLog][QtWidgets][QScrollBar] Fixed a bug where the valueChanged() signal
was emitted twice if a connected slot took too much time.
Task-number: QTBUG-42871
Change-Id: I7bad5279ef84463a033b55256d241d4445374081
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Add a functions to dump out texts character by character and
as code.
Task-number: QTBUG-43191
Change-Id: I1ac17f2485563f909b71bb1fbd1fd595d1d94223
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
QStandardPaths::writableLocation() is documented to return the
empty string if no matching writable location can be determined.
This is the case for e.g. FontsLocation and ApplicationsLocation on
Android. We need to still accept this as a valid response.
Change-Id: I2824e9dcfd41b1c24dbf3896b7ae9b5260e9accd
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The test expects all the files to reside in the file system,
both for loading the runtime resources and for comparisons.
Since we can't deploy directly to the file system on Android,
we go via qrc and extract the files on startup instead.
Change-Id: I17ff8985cb17dbfc45f0fb692ca46558bb5c5cdc
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This fixes a regression introduced with
c09e9f71173a698670d6c728291ee24f53d50800 which caused the lineedit to
clear the whole text when an invalid character was entered into a lineedit
with an echo mode that was not Normal and a validator was set.
Now if undo() is called directly then it will still clear the text as it
is considered to be called as a user. Whereas the validation will take
care of the invalid entry by using internalUndo() as before which avoids
the clearing of the entire text.
Task-number: QTBUG-29318
Change-Id: I5ff5777a75ab864de2217441b5f518f50646bd8f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Since those are unpredictable, there's little we can match, besides the
"0x" for the QThread pointer. For the PID, at least we can compare it to
the value from QProcess.
Change-Id: I89420306863b95c82be761baabd733a7f17eba5e
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
This test fails if the environment has the variable set.
Change-Id: Ibd54ff3e6e22a885341898889088ac56e84282b1
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Our theory for the failure of framePosition() not having the expected
value after setFramePosition towards the end of the test is that we try
to call setFramePosition() while the getting-back-from-fullscreen-to-normal
window animation is still running, at which point the compositor may
just choose to ignore our move request.
Similarly to when going fullscreen, also wait when coming back from it.
Change-Id: Icfc92f277d96dccdfad772c4aac252b2a20c6196
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
Add the source widget to the texture list (may be null for custom
compositor implementations that add textures not belonging to actual
widgets). This allows us to do proper checks with the
dirtyRenderToTextureWidgets list.
As a result paint events are only sent to a QOpenGLWidget if (1) there
was an update() for it or (2) it was actually marked dirty. (2) was
previously behaving differently: the widget got a paint event when
anything in the window has changed. This is fine for naive animating
OpenGL code but less ideal for QGraphicsView.
Bool properties like stacksOnTop are now stored in a flags value to
prevent future explosion of texture list fields and parameters.
Task-number: QTBUG-43178
Change-Id: I48cbcf93df72ac682c9b5d64982a8b648fe21ef3
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
The Qt bug tracker URL changes as part of the qt.io transition
Change-Id: Icb4ab198943b93639b5e3a8d99262303785c6459
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
The test still fails sporadically at a new place, so this adds some
debug information when it fails to may help us identify what is going
wrong.
Change-Id: Ife0f171299ef7e800a2d808602e76ca2f3885964
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
The calculateTabWidth() can trigger shaping of the item, which can
cause the layout data to be reallocated, so we need to update the
local pointers to it, like we do when we explicitly invoke the
shaper.
[ChangeLog][Text] Fixed problems with text layout when using custom
tab stops.
Task-number: QTBUG-43126
Change-Id: Ifaeeeb4bfb1a55e6638b12b444f53d2679d3d1e6
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
The setEmptyDefaultConfiguration test creates a socket and connects its
sslErrors signal to tst_QSslSocket's ignoreErrorSlot slot. This slot
expects the socket to have been stored in tst_QsslSocket's "socket"
member, which was not being done. This patch fixes this problem.
It does beg the question of whether having a "socket" member in the
tst_QSslSocket class is a good idea as it is error prone.
Change-Id: Ic59d1789c5f1ed240c3f0c37981f6ecc35572f0d
Reviewed-by: Richard J. Moore <rich@kde.org>
Calling QOpenGL2GradientCache::getBuffer() will generate the texture the
first time, calling glBindTexture in the process. We did this without
first ensuring that the right texture unit was active, resulting in the
generated gradient texture binding onto the glyph cache mask unit.
We now provide a specialization of bindTexture for a QGradient, which
ensures that the right unit is active before calling getBuffer().
Unfortunately we have no way of knowing if the result of getBuffer()
was a texture that was already bound, or if we need to bind the result,
which means we have to do an unconditional bindTexture of the resulting
texture ID. This means double-bind for the initial texture generation,
but this was already an issue in the original code.
Task-number: QTBUG-43039
Task-number: QTBUG-41244
Change-Id: I20c9b795c8c14f8d58be2b60a284c5a060705ec0
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Add new enum items PM_HeaderDefaultSectionSizeHorizontal and
PM_HeaderDefaultSectionSizeVertical to QStyle and get corresponding
values in QHeaderView. This way we get rid of some magic constants in
QHeaderView and we can have reasonable values for the default section
size for high-DPI displays.
[ChangeLog][QtWidgets][QHeaderView] Default section size is now style-dependent by default.
[ChangeLog][QtWidgets][QHeaderView] Added resetDefaultSectionSize().
Change-Id: I44e152c5cf0bec1e5d78e1e62f47a2d1f761dfbf
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Make sure the relational operators are in a constexpr'able form
by removing the use of the const/non-const-overloaded unicode()
function, which in the relational operators is resolved to the
non-const version, which isn't constexpr'able.
Replaced with direct member access for op== and op< (required
making them friends) and reformulating the other operators in
terms of these two.
Since I managed to introduce a bug while doing this change,
add a simple test for QChar operators, too.
Change-Id: I69f3da849e71abc2a17152f797694950914adebc
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The problem was that the span we stored in the multiCellMap was the
"effective" span (i.e. the given span subtracted with the number of
ignored rows it would span). Later we used that span to distribute its
size across all its cells. However, since the span now could be smaller
that the given span, we could sometimes fail to distribute to the last
span(s).
[ChangeLog][QtWidgets][layouts] Fixed a bug where spans sometimes didn't
distribute themselves to the last cells they covered.
Change-Id: I31db3d850484dc8b70d62c5f02f680740578c661
Task-number: QTBUG-43099
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
The sslErrors and peerVerifyError test the same situation: connect to a
server which is using the fluke certificate, using the incorrect host name.
They connect respectively to qt-test-server:993 and the.server.ip.address:443.
The sslErrors is prone to backend-dependent failures concerning the order
in which SSL errors are received, just like the peerVerifyError test was
until recently.
This change merges these two tests into one, which is run against the same
two servers as previously. It also adds a check to ensure that sslErrors
and peerVerifyError emit the same SSL errors (regardless of order).
This also fixes the included headers for non-OpenSSL backends.
Change-Id: Ibd5f60d24f1682989378e87729389e4b8f9efac5
Reviewed-by: Richard J. Moore <rich@kde.org>
The part of the test that verifies that setFramePosition moves the window
successfully appears to be very unreliable in the CI system. The "tested"
frame position is calculated to be at (40, 40) relative to the top left
of the available screen geometry, which can be non-zero due to task bars
and similar system ui elements. However that position appears to be
unreliable in the sense that the window manager doesn't seem to always
respect that. So instead let's try placing the window (by frame position)
in the center of the screen instead.
Change-Id: I96fe6c37e748fc18262632b5effe5a9e90dc0028
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
When the source model emits dataChanged, it may tell which roles
have been changed. That information was lost when using a
QSortFilterProxyModel -- the proxy simply dropped that argument
(meaning "all roles may have changed"). It's instead a good idea
to forward the roles argument, as it may minimize hits on the
proxy (on unchanged roles).
[ChangeLog][QtCore][QSortFilterProxyModel] QSortFilterProxyModel
now properly forwards the roles that have been changed when
the source model emits dataChanged().
Task-number: QTBUG-35440
Change-Id: Ifa5213866ba04dfd57d50b5fbd47638f2191eb8e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: David Faure <david.faure@kdab.com>
C++ standard advise to place 64k char limit for string literals, this
patch improves moc output so it is not affected anymore.
Task-number: QTBUG-36500
Change-Id: Iece630faaef45baebe8c7afe4fc51e0362c713de
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
We can not assume that the property type is always registered, because
QVariant argument may contain an instance of a different type.
Change-Id: I4fc9593b826e13c401dbdacec4d60db36edc7102
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Don't check for absolute counts of resize events but just check if we
were resized. Also use QTest::qWaitForWindowExposed instead of QTRY_COMPARE
and checking for QEvent::Expose.
Change-Id: Ie383493a8ce6d88cad50bd6375d432ad1578449c
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
When setting a left corner widget on a QMenuBar, the first
action rectangle is offset by its width and thus the width
should not be added to the size hint. Use QSize::expandedTo()
instead.
Task-number: QTBUG-36010
Change-Id: I660e3facbd0aeb5fb84fac8923db3e0c7998309d
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
When generating the DBus signature of a registered custom type the
marshaller appends the signatures of the map entries and array items
after the map/array causing an invalid DBus signature to be generated.
This happens because beginArray() and beginMap() output the full
signature of the data.
Fixed by suppressing changes to the signature within
beginArray()/endArray() and beginMap()/endMap() blocks.
Change-Id: Icaf23b2fe58a3e1f575b81e4a100f02684f68452
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I91ff06644e8047c2ca483f9768b46c1372eb6171
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Previously, QVariant would try to convert one operand to the other's
type, which would produce unexpected results: the results would depend
in the order of the operands and whether there was data loss in the
conversion. In addition, ordering comparisons were only done with signed
values, yielding other unexpected results, like
QVariant(LLONG_MAX / 2) < QVariant(Q_UINT64_C(0)).
Instead, try to obey the C++ standard rules for type promotion in
expressions. Our code is a little simpler than the standard would seem
to require since we know some more details from the ABI.
[ChangeLog][Important Behavior Changes][QVariant] QVariant now obeys the
C++ type promotion rules when comparing numeric types (integrals, float
and double), including the fact that unsigned comparisons are preferred
for types of the same rank (that is, now QVariant(-1) > QVariant(0U)).
Task-number: QTBUG-42722
Change-Id: Ie7b19073dcb45485354710975e561bcdb1a753f1
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Strange API asymmetry that needed to be fixed.
Task-number: QTBUG-8315
[ChangeLog][QtWidgets][QAbstractScrollArea] A getter for the viewport
margins has been added.
Change-Id: Ie1460b572206922031fc4effc2aa8261e25088b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The sizeHintChanged() signal from the column and row delegates need to be
connected to the doItemsLayout() slot so that the view is updated when the
size hint changes.
Additionally doDelayedItemsLayout() is called to ensure that this is
up-to-date as the size hints may have changed when the new delegate was
set on the row or column.
Change-Id: I458293f05ce9ef40a03bdbcab1a6e7a10f648c89
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Kevin Puetz <PuetzKevinA@JohnDeere.com>
Remove duplication of the set of flags.
Remove "text" column which had a constant value.
Change-Id: I39dd541a545664fb3f992b32b8c64e4dd263a9c7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Most of QtDBus already needs very little from libdus-1, so create an
extra header containing the minimum API we actually need.
One large advantage of this solution is that now QtDBus can always be
enabled, even if the system doesn't have libdbus-1 installed. This is
interesting on OS X, where libdbus-1 is often installed by Homebrew or
MacPorts, which may include extra libraries we don't want in our
packaging.
Change-Id: I1b397121ec12eeca333ef778cf8e1c7b64d6b223
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
If you press and hold a section in a header view you can extend the
selection to more rows by moving the mouse. This worked fine until you
moved the mouse outside the geometry of the header view. The expected
behavior was then to scroll the view (this is what happens with extended
selections on regular table cells).
[ChangeLog][QtWidgets][QHeaderView] Auto-scroll the view when making
extended row/column selections.
Change-Id: Ic65aa34d370e74054b2123ab57edb1add0e8adb9
Task-number: QTBUG-21201
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Conflicts:
dist/changes-5.4.0
7231e1fbe2 went into 5.4 instead of the
5.4.0 branch, thus the conflict.
Change-Id: I70b8597ab52506490dcaf700427183950d42cbd1
sizeHint() did it exactly like this, but minimumSizeHint() didn't,
which made it too small. Didn't affect the actual size in most cases
since the vertical size policy is fixed, so sizeHint() is called instead.
But when writing a subclass, if one re-implements sizeHint() by
calling the QLineEdit's minimumSizeHint(), it would then be wrong,
when text margins are used.
Change-Id: I29ae8dcab00842b3b5ca534cdb250efc0b496f45
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
[ChangeLog][QtNetwork][QtSSL] It is now possible to choose which elliptic
curves should be used by an elliptic curve cipher.
Change-Id: If5d0d58922768b6f1375836489180e576f5a015a
Done-with: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
The enum was made public in f84b00c6d2, but this
makes it follow the convention to camel case acronyms too before it's too late
to change it.
Change-Id: Ibb81e9221cb73fe0502d0a26f2d73512dd142f08
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When a popup is opened it grabs the input, but the leave event to the other
windows needs to be sent.
Remove the popupEnterLeave test as it did not test any code. The Popup
never gets any enter or leave events so it will succeed always succeed
Task-number: QTBUG-36862
Change-Id: I625c616eeb74b5168af7b751485e2a9a53b76cd3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
- Fix prototype for glinfo() for Qt 4
- Add more event types and object type flags to event filter.
Change-Id: Ia4160b40486d054e860a339e7b5c9c28695330ae
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
This makes it follow the coding style, which says to camel case acronyms too,
and makes it consistent with the rest of the class.
Change-Id: I4a1b21de1815530e476fc5aa8a0d41c724fc8021
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: hjk <hjk121@nokiamail.com>
The code in 4696e9dbaa was incorrect. It is perfectly valid to call
these methods with row=-1 column=1 parent=some_index, this is exactly
what happens in QListView and QTableView. Child row/column is only for
trees.
Move the coordinate mapping from QSortFilterProxyModel into a new
mapDropCoordinatesToSource internal method, used by QAbstractProxyModel.
Task-number: QTBUG-39549
Change-Id: I3312210473d84b639cbe4c01f70ea36437db3e91
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Stephen Kelly <steveire@gmail.com>
Somehow, it doesn't shrink with btrfs, even if you write 1 MB of non-
null data. This does not seem to be a bug in QStorageInfo. strace
confirms that there is a second statvfs call happening.
Change-Id: I9ed99d27d25e191916278e6b8faeae132469fc63
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The testcase always returns the expected result, independently of the
QEventLoop::ExcludeSocketNotifiers flag to processEvents.
In Qt4 the same test uses an intermediate QEventLoop and already runs
it before the QEventLoop::ExcludeSocketNotifiers:
QEventLoop loop;
// allow the TCP/IP stack time to loopback the data,
// so our socket is ready to read
QTimer::singleShot(200, &loop, SLOT(quit()));
loop.exec(QEventLoop::ExcludeSocketNotifiers);
This fixes and improves the test by connecting, processing and
checking the bytesWritten signal for the pending connection socket.
Change-Id: I1b1d2b7b83910c87ba3fe48e29ac9fd585ac62ad
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch is cherry-picked from
c38f1f19b8 and
d29d727d72
Task-number: QTBUG-32435
Change-Id: I6dbbb668b96737a5791bc688949a00bc09f1357f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
This patch is cherry-picked from
63ae74f365 and
07f234d2a8
Task-number: QTBUG-42528
Change-Id: I5f86679e62a4be48ce25afa5a4987a2b6678a357
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
The default should be the actual time of day. Showing the process's time
is the optional case. In the future, we'll provide a way to showing the
monotonic reference time ("boot") and we should improve the detection of
actual application runtime.
Change-Id: I41936d77ab9fad2073dc0ce1c97cabe57ec39f16
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
customMenuFont was null, so objects was an empty array, and
NSDictionary throws an exception when being called with arrays
of different sizes.
Task-number: QTBUG-42728
Change-Id: I8cdab449fd8c1d12b65c46dd5617a7f5e3e96c6e
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
QRegularExpressionValidator and QRegularExpression disagree on what a
partial match means.
[ChangeLog][QtGui][QRegularExpressionValidator] Allow empty string as
intermediate match
Change-Id: Ia6c55beb54870b1be5c88b6ef3eceebc8ca3f86b
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Whenever the source model of a QSortFilterProxyModel changes, and
the changes involve the sorted column, the implementation removes
the changed rows from the mapping, sorts them, and inserts them back;
in case of identical items, the rows are inserted at the end of the
block of equal rows.
The problem is that if the change doesn't actually happen on the roles
that are used for sorting, then we shuffle the rows, terribly confusing
the user. The typical case is a model with identical checkable rows:
(un)checking one row will move it at the end.
So, instead of trying to be smart with the removal/sort/insert sorted,
simply resort everything under the changed parent index. Since the
sorting used is stable, this keeps the items in the same positions.
Task-number: QTBUG-1548
Change-Id: Id0e61bd49da53b0a3e8aefa6b6893ac41179dc6f
Reviewed-by: David Faure <david.faure@kdab.com>
This would result in (a == b) != (b == a). The == operation should be
commutative as much as possible.
Now, there's still an asymmetry in that b is forced to a type and the
conversion may fail. QVariant should have an idea of what conversions
are "promotion" and which ones are "demotion" (subject to loss of data
and/or can fail), so it can do the promotion first
Task-number: QTBUG-42254
Change-Id: I9fa4496bbbf0f8719ff8456cc24247290beac608
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This now guarantees that doing a round-trip from an FP number to string
and back to number results in the same number. This change is required
because DBL_DIG and FLT_DIG don't have the meaning that we were
expecting them to, here: they mean the minimum number of digits of
precision in decimal (i.e., changing the last decimal will always cause
the FP number to change). We need the maximum number: there is one
change in the last decimal place that causes the FP number to change.
IEEE 754 single-precision has 24 binary digits and double precision has
53 binary digits in their mantissa. To convert that to decimal, multiply
by the number of decimal digits a binary digit represents (log2(10) =
0.3), then add one for the rounding and one more digit for the actual
precision we want. That is, for floats we now ask for 9 digits and for
double, 17 decimal digits.
Task-number: QTBUG-42574
Change-Id: Ic78beb60a218f75322f832d33d63fd84e7a65b65
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Change-Id: I7147d326b0f5bb218f4dbc013ed82efb4c1e1440
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
Place the rubberband over the tabs instead of where the hidden
subwindows happen to be.
[ChangeLog][QtWidgets][QMdiArea] Fix rubberband position for tabbed mdi windows
Task-number: QTBUG-42612
Change-Id: I41e81ab8b99ab9e0fa533fd4ed1b2a8141d19753
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Convert a Windows-specific WebDAV specification
"//host@SSL/path" into URL's with scheme set to
"webdavs" and back to local file (Windows only).
Task-number: QTBUG-42346
Change-Id: I12663243848ea7b2d3f208743e837e9de14a93eb
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Prepare for determining the suitable number of touch points
from the device type. For now, 2 points are used as
before, which can be overridden by setting the environment
variable QT_PAN_TOUCHPOINTS. Add member variable
to QPanGesturePrivate which is set on gesture creation and later
used for comparison.
Task-number: QTBUG-40461
Change-Id: I6d9e35ca752375bc6a54435482ca0925195b8142
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
These synchronously delivered events allow applications to correctly
and conveniently handle native platform surfaces being destroyed. This
is particularly useful when doing rendering on a non-gui thread as it
allows to shutdown rendering before the native surface gets destroyed
from under us.
Task-number: QTBUG-42476
Task-number: QTBUG-42483
Change-Id: I63f41bbdb32f281d0f3b8ec2537eb2b0361f3bb3
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
This is required so we can take a QVariant and detect that it contains a
Q_GADGET and then use method like QMetaType::metaObject and QMetaProperty::write
with the QVariant::data
Change-Id: I3603692e4e84426e10bf59949e3def3ea4947bec
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
When font embedding is explicitly disabled, fall back to painter paths
as we would if the font prohibits embedding. Note that this flag was
never respected on any platform in any version of Qt, as far as I've
been able to tell, because the handling of it in the X11 print
engine was removed shortly after it was introduced in 2005.
[ChangeLog][Printing] Disabling font embedding is now possible using
the QPrinter::setFontEmbedding() function.
Task-number: QTBUG-41943
Change-Id: Ice5e893f9893c5243310ae7892bec7497dd55c4a
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
We're not ready.
[ChangeLog][EDITORIAL] Remove all mentions of QVersionNumber.
Change-Id: I03ad95992982eb3177f982c1eeddb6a6bc29336c
Reviewed-by: Keith Gardner <kreios4004@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
gcc 4.9 has the __has_include feature which enables the
TEST_FORWARD_LIST and includes the forward_list header. This in turn
checks that the c++11 flags are enabled, or throws an error.
Change-Id: I44aa58e47c2f9ba6f14cb5a68d24da4a76698e5f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add a set of helper functions and classes providing functionality
for dumping widget/window hierarchies and logging events. They
can be used by including a .pri file for diagnosing bugs and
comparing Qt 5 to Qt 4.
Change-Id: I0206f8e57b02540cd80a3e9446c894023d442ddc
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
We need to reset the active_engine belonging to QOpenGLContext whenever
we make the QtOpenGL paint engine active, to give the OpenGL paint
engine in QtGui a chance to sync its state if we've used the QtOpenGL
paint engine inbetween.
Change-Id: I445ce2f99bfbacf55650c881c4fdf07f2ff85069
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
When using QGLWidget in combination with QOpenGLFramebufferObject from
QtGui, instead of QGLFramebufferObject from QtOpenGL, the current_fbo
variable doesn't get updated when framebuffer object bindings change.
To ensure that the QGLWidget correctly releases the currently bound
framebuffer object when using a QPainter, we keep track of whether
QOpenGLFramebufferObject has modified the current FBO binding, and if
that's the case we need to read the OpenGL state directly instead of
relying on a cached value.
Change-Id: If7e0bd936e202cad07365b5ce641ee01d2251930
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
When tokenizing, after macro expansion, moc needs to concatenate
subsequent string literals, because parser do not check for such
expressions.
Change-Id: Icc4f01395a5a7b67368eb8341a45ee74ade7d7f5
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Fix warning:
QEventLoop: Cannot be used without QApplication
and occasional crashes on Windows.
Task-number: QTBUG-26406
Change-Id: Ia8b2a4e3d375d1e43f0e66fe64a39af5f9cf4d60
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Dario Freddi <dario.freddi@ispirata.com>
This is present in QList already and its lack is a nuisance when
switching from QList based code to QVector (which makes sense e.g.
if the item size exceeds sizeof(void*))
Also, albeit operator+=() and operator<<() exist, some people
simply prefer functions with real function names.
[ChangeLog][QtCore][QVector] Added QVector::append(const QVector &) overload
Change-Id: I9aae8223b086765625f2f3071fab5da0780f8a43
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
We map the Apple Clang versions to upstream, so that we have one
define to compare against.
Fixes build break on iOS due to qbasicatomic.h not defining
QT_BASIC_ATOMIC_HAS_CONSTRUCTORS on Apple Clang versions, which
is needed after 1e9db9f5e1
Change-Id: I17493c0187c20abc5d22e71944d62bfd16afbad2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the QWidgetWindow receives a resize or move event, it should check
with the widget if its crect already has this geometry. if not then send
the resize or move event
Ideally events should be sent whenever the QWidgetWindow receives them.
QTBUG-42383 is created for this problem
Task-number: QTBUG-29937
Task-number: QTBUG-38768
Task-number: QTBUG-30744
Change-Id: I1e9a5d25de29a98885edece927ba14d7a763eb01
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
For some reason lost in time QFrame was missing that method. Of course
that led to duplicated code and to subtle sizing miscalculations.
Task-number: QTBUG-29330
Change-Id: I81163f5def6661e01cb2ecc49c1169449a3e3758
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This test shows a behavior change of setFrameStyle(QFrame::WinPanel)
between 4.4 and 4.5.
Turns out that 4.4 defaulted to "Raised" only via a side effect of the
code, while 4.5 defaults to "Plain" which makes more sense since Plain
is the default anyway. So there is no actual bug to fix (the app code
really meant QFrame::WinPanel|QFrame::Raised anyway), but the unittest
is still good to have for the future.
Done-with: David Faure
Change-Id: Icf16382504b18357256bc601b1e865abac9f2b2a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Of the const overloads that return a QString or a QByteArray, this is
one that gains the most benefit. It happens often in constructs like:
QByteArray s = x.readLine().trimmed();
After this change, 41 out of 103 calls to trimmed become rvalue in Qt
and 272 out of 441 in Qt Creator. For simplified, the numbers are 27 out
of 69 in Qt and 10 out of 19 in Qt Creator.
Other candidates are left, right, and mid, but there are exactly zero
uses of left, right and mid on an xvalue QString or QByteArray in Qt.
I'm being lazy and using qstring_compat.cpp to store the QByteArray
compat methods.
Change-Id: I4e410fc1adc4c761bb07cc3d43b348a65befa9f6
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
For some reasons lost in history, those methods simply ignore
the list of items passed to them, and always return NULL.
Of course, that's totally broken. Fix that by doing the same thing
that the respective (hidden) models did when calling mimeData().
Surprisingly enough, QTreeWidget has a proper implementation.
Task-number: QTBUG-25900
Change-Id: I99ca7b4d4f87f096fd9ff0b0cb4e58282aa9c26e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
QMetaType::type(const char *) requires that the string argument is
0-terminated. This new overload makes it possible to query the type
of a string with an explicit length.
In particular, QByteArrays constructed by QByteArray::fromRawData(),
for example from a substring of a normalized method signature (the
"int" part of "mySlot(int"), can now be queried without making a copy
of the string.
Also, Qt5 meta-objects represent type names as QByteArray literals,
which can be fed directly to this new QMetaType::type() overload (no
need to call strlen).
Change-Id: I60d35aa6bdc0f77e0997f98b0e30e12fd3d5e100
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Several of the unit tests request that the peer emit more than one
signal, but only handle one. The rest of the signals stay queued in the
socket and will be delivered at the next test, causing it to fail often.
This doesn't happen in the tests with the bus. There, we don't receive
the extraneous signals due to AddMatch/ReceiveMatch on each signal
individually and the synchronous nature of the emission (the signals
have already been emitted by the next AddMatch and cannot match it).
Task-number: QTBUG-42145
Change-Id: I743a0553074972042fca46b76db5d9e7b3209620
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Unlike qtouchevents, this provides a touch area which logs its
events and devices.
Task-number: QTBUG-40461
Change-Id: Iaaa3589dd692caf8c7078f5ed2ff1e8b2322a369
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Methods can be invoked with QMetaMethod::invokeOnGadget
Change-Id: Id734868bb530b02587daf0f62bce01798ade2ac2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Adds automatic conversion from QVariants with a QVariantHash to
QJsonValue and explicit methods for conversion between QVariantHash
and QJsonObject.
[ChangeLog][QtCore][QJsonObject] Added conversion to and from QVariantHash
Change-Id: I140ef881463acabaab2648e28209487d8ad18e0d
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Instead of sending the event from random places, send it from
QWindowSystemInterface. This allows to send override events on OS X to
menus before doing other key processing and reduces the number of
ShortcutOverride events on all platforms to exactly one per key press
event.
Additional test by Friedemann Kleint.
Task-number: QTBUG-38986
Change-Id: I6981bb776aba586ebc7c3daa5fd7a0d84c25bc3e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
If we detect a utf8 BOM mark at the beginning of the .ini
file, skip the marker and set the iniCodec to utf8.
Task-number: QTBUG-23381
Change-Id: I1b37fc4f1638a48e4f3ee71ab165e2989bc592f1
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
We do not need to emit a diagnostic at definition time.
The diagnostic will be emit at expansion time.
Fix error when parsing boost header:
/usr/include/boost/fusion/container/vector/vector.hpp:25: Error: '#' is not followed by a macro parameter
Task-number: QTBUG-42233
Change-Id: I27deab362341f17ca3b0160615bb1b0934c3d5c3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
OS X now has a setting (General->Show scroll bars) to use only transient scroll bars.
Task-number: QTBUG-41340
Change-Id: Iffe30e9d601c169d955a380002743bab518f41ea
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
ICU would return a utf-16 (endian dependent) codec for unicode
which is very rarely what people want. In most cases, unicode is
encoded in utf8 these days, so return a utf8 codec for it.
Task-number: QTBUG-41998
Change-Id: I51ee758d520702b263a8b2011787eb1f3455ed96
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Adds special shaders for the Alpha8 and Grayscale8 formats so that
they do not need to rely on the support of GL_ALPHA and GL_LUMINANCE
that has been removed from core in recent OpenGL versions.
Change-Id: Ie370379b458abf2a50e252bc5099aefc1b11fb1d
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Do not automatically add a \n to all messages formatted by
qFormatLogMessage. Some backends require a final newline,
some don't, so it's best to only append it where it's actually needed.
The returned string will be null if the pattern is empty. This allows
to differentiate between the case that the pattern just didn't apply
(empty line is printed), and the case that qSetMessagePattern(QString())
have been called (nothing is printed).
Change-Id: I17fde997a4074f58f82de6dea129948155c322d6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
This extends the test suite introduced in 497f0af1f7 for
a known-to-be-good case.
Change-Id: Ib574ecfdb8e9d91985d6df8c092896581d1d06ff
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The previously produced code was valid C++. Add the declaration
nevertheless to help people who want to use the switch in their
own code.
Task-number: QTBUG-42119
Change-Id: Ia47cf3930684474ff65e5cf37335d7d7f57a1d31
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QLineEdit commits and hides QInputMethod on enter key press. When
Qt::ImhMultiLine input method hint is set, virtual keyboard is not
hidden.
Task-number: QTBUG-37850
Change-Id: I018351caa18bd2116665771e5f024a57182a01b9
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Replace "Apple Roman" by "Macintosh" which is registered by IANA:
http://tools.ietf.org/html/rfc1345.
Replace unsupported "GB18030-0" by "GB18030".
Remove "JIS X 0201" and "JIS X 0208" as they are supported as parts of
other Japanese encodings but not directly.
Add "HP-ROMAN8" which is supported by both Qt and ICU.
Also clean the codecs test.
Change-Id: Iaf8e8ff1900d3f92ea0e0df75c60fe1534de23ac
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Substitute this encoding by "macintosh" when Qt is built with ICU.
It is for compatibility with Qt 4.x.
Change-Id: I70c51cba7d473ac81e25862736cb71a2f6894055
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Removing and adding toplevel items could result in invalid stacking
order (not corresponding to insertion order).
Task-number: QTBUG-19316
Change-Id: Ia8646784a2181cfa936b101e2adaf7e7e73bb83d
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Selection rectangle was incorrectly mapped to scene space when the
view was rotated. It became a rotated rectangle instead of the correct
polygon (rhombus).
Task-number: QTBUG-42008
Change-Id: Ib7b366bec7e1f83109e03c434268ad6897138f30
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
