The QTextFormat::FontLetterSpacingType property was added outside
the span of the FirstFontProperty and LastFontProperty, so
the fontDirty flag would not be set when it was changed. There is
no binary compatible way to fix this before Qt 6, so for now, we
add a special case for it.
[ChangeLog][QtGui][Text] Fixed an issue where changing the letter
spacing type of a QTextCharFormat would not cause its font to
update.
Task-number: QTBUG-65345
Change-Id: I5ab53d7f82d529b57edceacfc3fa688c6741cd17
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: C. Boemann <cbo@boemann.dk>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
On Windows, QFileInfo.isWritable() was returning true in situations
where the file would only be writable with elevated privileges. Using
AccessCheck instead of GetEffectiveRightsFromAcl to get the correct
results.
Done-with: Friedemann Kleint <Friedemann.Kleint@qt.io>
Done-with: Edward Welbourne <edward.welbourne@qt.io>
Task-number: QTBUG-30148
Change-Id: I7a3468ac069bf782ca312078e3a84107b6cd468c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
old style connects have protection against null sender and null receiver,
but new style only had against null sender.
Change-Id: Ie555ac078412918e60c3b60830fe1f3abfb7f5af
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QHeaderViewPrivate::_q_layoutChanged() was not called when used in a
QTreeView because it was explicitly disconnected in setModel().
The disconnect was added sometime prio to Qt 4.3, but there the signal
was connected to the doItemsLayout() slot. This was correct since
QTreeView::doItemsLayout() is calling header->doItemsLayout().
In Qt 4.3.0 _q_layoutChanged() was introduced and the disconnect was
adjusted. But since _q_layoutChanged() is doing much more than
doItemsLayout() (e.g. restoring hidden sections), functionality was
lost. The problem was already observed for Qt 4.6 (QTBUG-18196) but
only partially fixed.
Task-number: QTBUG-41124
Task-number: QTBUG-54610
Change-Id: Id13a9930d0163812e12a0287016bab9c3aa02068
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Follow-up to d044b0b, with claimed to remove it but
didn’t.
Change-Id: Ifeeb6b062c7c41f1914d677e8aa20e4cb9378ac9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If a signal is emitted more than once in a multithreaded application the
QSignalEventGenerator::execute function asserts in the check for a valid
signal index. It happens after abandoning the state and all the
connections are disconnected. If we have pending signal to be
processed the QObject::sender() won't be able to resolve the sender
object.
Task-number: QTBUG-61463
Change-Id: I9d4b7266c6dddc9ff2e7453b05a6989876ccb332
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Commit 68bcccac took account of MS TZ APIs mis-describing non-DST
zones making changes to standard offset (e.g. Europe/Samara in 2011 at
the end of October); however a DST transition that coincides with an
equal and opposite change to standard offset, while the other end of
its DST period changes normally, ends up looking exactly the same
(although it's nominally subtly different), in MS's APIs. Thus fixing
the more common case broke this more obscure case; there is no way to
fix this (other than not using MS's broken-by-design APIs). So kludge
the test to skip the bit we know this breaks.
Task-number: QTBUG-64985
Change-Id: I068500e2e783ab72b400bfd6dbb7dbbd5b08a7bc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test would fail on Wayland with window decorations enabled because there
window content is drawn to an FBO before it's blended with the window
decorations (also drawn by the client).
Task-number: QTBUG-51741
Change-Id: I7c74ad235c6a2d50231a9f863da1810675dd4eae
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Autotest is taken from the previously reverted
8b1377fde1.
Task-number: QTBUG-60231
Change-Id: I44dd79cba22b6baefdd6d95c176790bef0b7eafe
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
QFontMetrics(F)::width() has been deprecated and is replaced by
horizontalAdvance(). This updates all usage of it in tests and
documentation.
It is worth noting that many or most of the usages of
QFontMetrics::width() probably intended to use boundingRect().width(),
but since it currently works, I have not looked into that, just
replaced the function name mechanically.
Change-Id: Iec382e5bad0b50f37a6cfff841bfb46ed4d4555f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use being()/end() instead.
These were the last remaining uses of QRegion::rects() within qtbase.
Change-Id: I264beb6f660968f40eecbbee2260341fca94ddb5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The introduction of begin()/end() actually made most tests
that still use rects() duplicates. Keep them, though, for
test coverage (rects() takes a very different code path
from begin()/end()), but, under the assumption that Qt at
some point will default to built with deprecated APIs dis-
abled, make the test compile with disabled deprecated API.
Port some checks that still used rects() to begin()/end().
Change-Id: Ia7da80f0cd6ef69693f54a474924683624a2c3eb
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Drop the useless copy 'r' of 'region', reuse 'r' for the rects in 'region',
to clean up the region handling in verifyColor().
Change-Id: I8e159976b4b0152823be864488d2ef25d7cb0078
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Test fails to start on FreeBSD:
FAIL! : tst_QUdpSocket::initTestCase() 'networkSession->waitForOpened(30000)' returned FALSE. ()
Loc: [/usr/home/tjmaciei/src/qt/qt5/qtbase/tests/auto/network/socket/qudpsocket/tst_qudpsocket.cpp(234)]
This commit is basically a revert of the Qt 4.8 commit
a951fb79139498774d021759d0466b4b2ff50e68. FORCE_SESSION was only used by
manual testing, as the commit message said
> 8. For manual testing, added the FORCE_SESSION macro to test behaviour
> of UDP sockets when they have an explicit network session associated
So I doubt it has been tested recently.
Change-Id: Ifb5969bf206e4cd7b14efffd14fb569ebf53497b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
I broke it in commit 4da2dda2aa. It wasn't
flaky or anything: it was plain broken and would never pass. That
indicates no node in the CI has an IPv4 link-local address (and
apparently neither did I at the time).
Change-Id: Ifb5969bf206e4cd7b14efffd14fb62176546916e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
FreeBSD, for example, does not have SO_NREAD and its FIONREAD returns
the full socket buffer size, including IP and UDP headers.
Change-Id: Ifb5969bf206e4cd7b14efffd14fb5d8ca778d16a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Also drops a few instances where the dependency was purely runtime,
especially for examples.
Change-Id: I2a0476f79928143596bdb3b8f01193af90574ae8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
As the numercialPrecisionPolicy can be set and subsequently retrieved
from the QSqlDatabase's driver, then when copying the QSqlDatabase, we
need to set that appropriately too.
Task-number: QTBUG-10452
Change-Id: I2c63748365ab4e9fbc29d8d460d80d2e2a0ee385
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We haven't had support for anything older than 7.3 for a long time, so
this removes the code to save having to maintain it any further.
Task-number: QTBUG-644
Change-Id: If0635f3bef5138a00a0e77011a70f23d0bffda32
Reviewed-by: Robert Szefner <robertsz27@interia.pl>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
A mysterious file c:\dev\null appeared when running the auto tests on
Windows. Fix by using QMAKE_SYSTEM_NULL_DEVICE.
Amends 5f3529be32.
Change-Id: I0224a9ccd61c4f10b2ddb8f8d690e1849aa88d8a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The test is flaky on Linux.
Task-number: QTBUG-64639
Change-Id: Iec56ebce4f656f52187b34c8f655b137e41c3d17
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
QAbstractItemDelegatePrivate::textForRole() was formatting date and
time separately, then gluing the parts back together with space.
QLocale can do that just fine itself (it has a toString() overload
that handles a QDateTime) and might even (some day) do it better. To
my mild surprise, this proved sufficient to fix a problem with
date-time display in tool-tips, when the date-time includes a zone.
Extracted the date-time part of an existing selftest into a test of
its own and extended it to test times of each spec-type; verified that
the non-local spec cases of this all failed before this fix.
Task-number: QTBUG-61069
Change-Id: I6d6be0c27be9a557d8afc3ced200a10b2aaff816
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Previously, a 1, 2 or 3 for "dd" would be rejected because 10, 20 or
30 would fit in the field and be valid; but 4 or more was accepted,
even though it was too short for the field, because no suffix could
make it valid within the field-width.
[ChangeLog][QtCore][QDateTime] When parsing dates and times from
strings, fixed-width date-time fields, such as a "dd" for day,
QDateTime now rejects all values that should be padded, rather
than only doing so when the value is a prefix of some value that
would fill the field-width. Use a single letter for the field,
e.g. "d" for day, if you want to accept short
values. (QDateTimeEdit is not affected.)
Task-number: QTBUG-63072
Change-Id: I22d223c50057c3edab4ef7f01d9ed0f58e9139c1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Test-case taken from bug-report; fits in as an easy row in an existing
data-driven test. Add similar tests for date-time and time; and an
isValid test on the end of year 9999. The date-time parser was using
the end of year 7999 as maximum value for dates and date-times; extend
this to year 9999, as I can see no reason not to.
[ChangeLog][QtCore][QDateTime] Years up to 9999 can now be parsed
without error (previously 8000 and beyond were treated as invalid) in
all formats (not only in ISO format). Widgets handling dates now
support dates to 9999, likewise.
Task-number: QTBUG-64401
Change-Id: I518cfa6c2cb4ecc5a85b896dc9e56b4fdd8a8bb1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When a new source model was set to QSortFilterProxyModel, the model
tried to remap the persistent indexes to the new model which was wrong.
The correct solution is to clear the persistent indexes with
_q_sourceModelDestroyed() since the old source model went away.
Task-number: QTBUG-44962
Change-Id: Id39e9ac83324250e8bfa434aae467a9206d2590e
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
setSession is only used if we have bearer management.
Change-Id: I64b9d29c01566e79bbca5d0dc11d6aee6d9b0bf0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QTreeWidgetItem::insertChildren should behave like a more-optimized
QTreeWidgetItem::insertChild. Unlike the latter, the former lacks
out-of-bounds checks, resulting in successful insertions even
when using an invalid index (say, bigger than the row/column count).
Reintroduce some sanity checks instead. This allows to fix a "fixme"
left in the autotest.
[ChangeLog][QtWidgets][QTreeWidgetItem] QTreeWidgetItem::insertChildren
now ignores insertions happening at invalid indices, for
consistency with QTreeWidgetItem::insertChild.
Change-Id: I1532597768cc6aff96a6e8f356bc6075b582801d
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
The previous commit didn't handle correctly the case where an entire
mime directory is deleted. The unittest wasn't testing that case,
now it is. We need to move providers into a new list, and then
delete those left over (i.e. now unused).
Change-Id: I04fd8b39b511a2331d706864f695ce5074acf916
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously, we would use mime.cache in all mime directories if at
least one of them had such a file (other than the most-local one),
otherwise the "source" XML would be used in all directories.
Now it's possible to use mime.cache in those directories which
have one, and XML in those directories that don't.
Not only is this more correct, it will allow in a subsequent
commit to bundle the binary cache in QtCore's qrc rather than
the very big XML file.
The design change to allow this is that now every provider
only deals with a single directory, and QMimeDatabasePrivate
takes care of creating multiple providers, one for each dir.
This required to move most of the loops from the binary provider
up to QMimeDatabasePrivate itself.
Change-Id: Iac82d5f5836b80d45076e586b903d16fa2525b34
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The tests start to show flakyness on Linux in 5.10 (rowCount() check
failing). This seems to point to a race condition between the files
showing up and the file system watchers of QFileSystemModel starting.
To fix this, close the file and wait until it shows up in the directory
before pointing the QFileSystemModel to it. The tests then no longer
rely on the file system watchers.
Change-Id: I39cffb4cacf6843e8e4180efb405345307c78dd8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The reason for each is given in the skip. It's mostly about the
server-side encryption, which is unimplemented for WinRT.
Change-Id: I036b95a4526e02fd047e193f2b3c9130bec08144
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This lets the tests run on devices which previously did not have access
to the files used (WinRT, mobile devices).
Change-Id: Ibdd85862eee6ab1a7d4da87ca321ee9bc9880bfa
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Since removeAll() takes its argument by cref, if passing a reference
to an element of the container to removeAll(), the element may be
deleted (overwritten) by anyother value, leading to UB.
Add a test that actually happens to fail for me without the patch,
even though that might not be guaranteed (we may invoke UB).
Change-Id: If8c795113aeb515f4a9bdf1e072395b932295667
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
During the container BoF session at the Qt Contributor Summit 2017 the
name of the signed size type became a subject of discussion in the
context of readability of code using this type and the intention of
using it for all length, size and count properties throughout the entire
framework in future versions of Qt.
This change proposes qsizetype as new name for qssize_t to emphasize the
readability of code over POSIX compatibility, the former being
potentially more relevant than the latter to the majority of users of
Qt.
Change-Id: Idb99cb4a8782703c054fa463a9e5af23a918e7f3
Reviewed-by: Samuel Gaist <samuel.gaist@edeltech.ch>
Reviewed-by: David Faure <david.faure@kdab.com>
We have had test.qt-project.org for close to 3 years now.
Change-Id: I71488efd29b645f7b228fffd14fadf4627288243
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
(cherry picked from commit 5f66f87181)
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
We have had test.qt-project.org for close to 3 years now.
Change-Id: I71488efd29b645f7b228fffd14fadf4627288243
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Allows categorized logging before QCoreApplication has been created,
which otherwise would silently fail to output anything because the
category would never be enabled, despite QT_LOGGING_RULES being set.
Change-Id: I1861e5366ea980dff2ffa753b137276c77278eee
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The test is removing 2 rows starting at the last row of a model.
As the comment indicates, that's clearly invalid.
Change-Id: I43ef00d602934965b206e2ba591ff8fd0a6ae398
Reviewed-by: David Faure <david.faure@kdab.com>
Unary ~ is not defined for enum classes, so we need a cast.
Change-Id: I79d495ebcc24ab960da8dae3be08eb307a9de448
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... and unblacklist it on Windows.
From what I can tell there is no particular reason why this test fails
other than that it is a little too slow sometimes (these things happen).
So, to fix the test I bumped the timeout, but to avoid the test running
for longer on every test-run it now also ends when the socket enters
the "Unconnected" state.
Previously it failed 171/500 times, and after this patch it failed
0/1000 times.
Change-Id: I4266bff6b91aaaf502ee66265d01c3a177706402
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
The assertion in isUnnamedFile() we had was incorrect after the file was
removed, since we cleared the name and possibly reset back to the
template. Since ~QTemporaryFile() calls remove(), this was easy to
trigger if you attempted to remove the temp file and leave
QTemporaryFile like that.
Take this opportunity to add to the docs of setAutoRemove() explaining
the possibility of unnamed files.
#7 0x00007f69bcc2b50e in qt_assert (
assertion=assertion@entry=0x7f69bcf194a0 "unnamedFile == d_func()->fileEntry.isEmpty()",
file=file@entry=0x7f69bcf19458 "io/qtemporaryfile.cpp",
line=line@entry=514) at global/qglobal.cpp:3123
#8 0x00007f69bcd672cf in QTemporaryFileEngine::isUnnamedFile (this=this@entry=0x55cd60644df0)
at io/qtemporaryfile.cpp:514
#9 0x00007f69bcd683f7 in QTemporaryFileEngine::remove (this=0x55cd60644df0)
at io/qtemporaryfile.cpp:396
#10 0x00007f69bcd48654 in QFile::remove (this=this@entry=0x7fffb393f7e0)
at io/qfile.cpp:513
#11 0x00007f69bcd6653b in QTemporaryFile::~QTemporaryFile (this=0x7fffb393f7e0, __in_chrg=<optimized out>)
at io/qtemporaryfile.cpp:719
Change-Id: I57a1bd6e0c194530b732fffd14f4ed28ca8185b2
Reviewed-by: Andreas Hartmetz <ahartmetz@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A layoutChange indicates that anything can have moved to anywhere else,
including as a result purely of new items being added. It can also
indicate that items are removed.
The old code here incorrectly assumed that the section count remained
constant over this operation by setting the size of the oldSectionHidden
QBitArray - whose size is the size before the layoutChange operation -
and then calling setBit with model rows numbered after the layoutChange
operation. As the two are not necessarily the same dimensions, this can
result in asserts from the setBit call.
Simplify the handling of layoutChanged entirely by clearing section
information, and using the QPersistentIndexes which indicate hidden
state to restore that state after re-population.
Task-number: QTBUG-53221
Change-Id: I3cda13e86b51b3029b37b647a48748fb604db252
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Make sure we don't run into warnings for CMake 3.10
Task-number: QTBUG-63442
Change-Id: Ida004705646f0c32fb4bf6006036d80b1f279fd7
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Sebastian Holtermann <sebholt@xwmw.org>
Reviewed-by: Rolf Eike Beer <eb@emlix.com>
... and unblacklist it.
It was blacklisted some years ago because it was failing too often.
It was failing because the ssl socket had already received and decrypted
all the data it was going to get, meaning the waitForReadyRead call was
just going to block forever.
Change-Id: Ia540735177d4e1be8696f2d752f1d7813faecfe5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Since the first item in a treeview might be hidden, start from the
first visible item in the view when starting or wrapping round
during a keyboard search.
Task-number: QTBUG-63869
Change-Id: I202bea567c6d4484c3ffaf8a5f9af8ea2e13708d
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This test became a real pain recently. A close look at the test shows
several problems (strangely enough, the failure can never be
reproduced on real machines, only on VM - Ubuntu and RHEL 6.6).
There are several asserts that are firing from time to time here and
there. They show that the logic in test is broken/incorrect. QNAM can
open several connections to a host, our test then incorrectly resets
its 'client' data-member and bad things can later happen after
'bytesWrittenSlot' executed (and deleted a socket). For example,
I can reproduce this scenario in every second run:
1. incoming connection -> client = socket(descriptor), connect to
client's readyRead (s1)
2. incoming connection -> client = socket(descriptor), connect to
client's readyRead (s2)
QNAM sends a request on s1. We reply on s2 (which is already wrong)
and call client->deleteLater(), which resets client to nullptr.
If QNAM sends something else on s1, we hit assert(!client.isNull()).
To avoid this, whenever 'sender' in any slot is different from the
'client', we use the actual 'sender' to reply. Another problem is this
weird and rather cryptic waitForFinish which is not needed in this
particular test since we wait for reply error, not 'finished'.
As it happened before - it's not clear if these two problems
were the cause of guaranteed fails on CI - an integration failed
~10 times in a row in the same test (not happening anymore though).
Task-number: QTBUG-64569
Change-Id: Id9aa091290350c61fadf1c3c001e7c2e1b5ac8f4
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Both ARM and x86 can convert fp16 much faster in bulk than one at a
time. This also enables hardware accelerated conversion on x86, when
F16C isn't unconditionally available at compile time.
This code is implemented in C to ensure that there's no leakage of
inline symbols from the .obj file that was compiled by Visual Studio
with AVX support. Unfortunately, simd.prf uses $(CXX) instead of $(CC)
for all its sources, which means the file gets interpreted as C++ by
g++, clang++ and icpc. Those compilers at least don't leak any symbols.
Done-with: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I9d26d99e83392861fb09564e0e8e8d76cd8483b3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Tested with Clang, GCC 4.5 & up, ICC 17 and MSVC 2017. No current
version of MSVC supports C11 and GCC implemented the features slightly
later in C than in C++.
Change-Id: I57a1bd6e0c194530b732fffd14f45c5074c9a052
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When calling QTreeView::hideColumn() the row heights are not
recalculated. This can lead to rows which are unnecessarily high due to
hidden columns may contain large (e.g. multiline) content. The same
applies to showColumn() - there the row might be to small.
Hiding columns directly via QTreeView::header()->hideSection() is not
covered by this patch since QHeaderView has no way to inform about
newly shown/hidden sections.
Task-number: QTBUG-8376
Change-Id: I20b1198e56e403ab8cf649af76e5e2280821dd68
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Also blacklist tst_QNetworkReply::ioHttpRedirectErrors(too-many-redirects)
on RHEL 6.6 in CI.
Conflicts:
tests/auto/network/access/qnetworkreply/BLACKLIST
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Task-number: QTBUG-64569
Change-Id: I7514fc0660c18fd3a3e1d0d0af3f15d879e3c6f4
This test makes sure that we do not introduce a regression where the
threads exited the inner loop over the queue before the queue was
empty. This was triggered by calling tryTake at least maxThreadCount
times, which left the same number of null pointers in the queue
and caused the inner loop to exit too soon for all the threads.
Change-Id: I3a9d800149b88d09510ddc424667670b60f06a33
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The verifySessionProtocol() method in the SecureTransport backend did not
properly handle TlsV1_0OrLater, TlsV1_1OrLater and TlsV1_2OrLater.
This commit teaches verifySessionProtocol() about them.
It also adds TlsV1_0OrLater, TlsV1_1OrLater and TlsV1_2OrLater to the
protocolServerSide() test in tst_qsslsocket.
Backport from 5.10 to 5.9 (LTS).
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit 9c765522d1)
Change-Id: I58c53bdf43e0f19b4506f3696d793f657eb4dc6f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
As it stood, we would set 'pressed' to false regardless of which button that
was released. This would end up wrong if pressing the left button, and
at the same time, did a click with the right button. This would clear the
flag prematurely, and cause a release signal not to be emitted when later
releasing the left button.
tst_QAbstractButton: adding autotest
Adding tests to simulate the bug report's cases:
1) left press button
2) click right/middle key
3) move mouse out of button's boundary
4) test if the released() signal triggered properly
Taks-number: QTBUG-53244
Change-Id: Ifc0d5f52a917ac9cd2df5e86c0475abcda47e425
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When looking for the primary index, it is possible that the
constraint_name in the all_ind_columns table does not match that of the
index_name. Whereas the index_name will match in this case, so the query
should set the where clause on the index_name in both tables.
Task-number: QTBUG-64427
Change-Id: I1bf1fb580e620b9f75f2fde1ecf408842e377365
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Looking at the failures in grafana it appears this test is also failing
on Windows 64. The same fix applies then, and we use Q_OS_WIN now.
Change-Id: Iafcfd6d1e747f3c816878cad072fbfae3aee19ca
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Replaces the Qt Accessibility Windows back end, formerly based on legacy
MSAA, with a new implementation based on UI Automation. Fixes issues with
accessibility tools like screen readers and magnifiers, and with the
automatic showing and hiding of the virtual keyboard in touchscreen-based
Windows computers.
[ChangeLog][Windows] The Windows Accessibility back end, formerly based on
Microsoft Active Accessibility, was replaced with a new implementation
based on Microsoft UI Automation.
Task-number: QTPM-487
Task-number: QTBUG-53024
Task-number: QTBUG-43190
Task-number: QTBUG-61926
Task-number: QTBUG-38499
Task-number: QTBUG-38337
Task-number: QTBUG-38501
Task-number: QTBUG-38502
Task-number: QTBUG-38504
Task-number: QTBUG-38505
Task-number: QTBUG-38507
Change-Id: I20b4f8f5e938fef791c6e9c577fcd919140999bd
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
When parsing a date-time's zone, a stray Z denotes UTC (a.k.a. Zulu
time), despite not being a valid name for the zone. Clients parsing
such date strings had to treat the Z as a literal, rather than a
zone-ID, but then they got back a LocalTime instead of the UTC the
string actually described. So teach QTimeZoneParser to handle this
special case and adapt an existing test (that used a time ending in Z,
but had to treat it as a local time) to check this works.
[ChangeLog][QtCore][QDateTime] When parsing a time-zone, "Z" is now
recognized as an alias for UTC.
Change-Id: Ib6aa2d8ea2dc6b2da526b39aec74dbc007f90fd8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A source of constant confusion is the QFontMetrics::width() function,
which does not return the bounding width of the text, but the advance
width. We deprecate this and add horizontalAdvance() instead, to avoid the
confusion in the future.
Note that there was an internal width() overload which was only there
for the purpose of supporting the Qt::TextBypassShaping flag. This
flag has already been replaced by public API, so no such
overload is added. Instead, we deprecate the TextBypassShaping flag
as well, which makes sense, since a replacement has been made.
Also note that there was a consistency problem with QFontMetrics and
QFontMetricsF, which are supposed to be interchangeable. The
QFontMetrics::width() functions for strings took an optional int length
argument, while the floating point version did not. This error is
corrected in the advance() functions.
[ChangeLog][QtGui][Text] Added QFontMetrics::horizontalAdvance() and
QFontMetricsF::horizontalAdvance() to replace the confusingly named
width() function. The latter has now been deprecated.
Change-Id: I0dfda43aa65c8235be32c62fade82cae05b29c79
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This allows us to make sure that the PID we read is from the same boot
as we are right now running. The collision could happen on embedded
systems where the boot sequence is fixed, so all the same processes
would have the exact same PIDs after reboot as they did before.
[ChangeLog][QtCore][QLockFile] QLockFile can now properly conclude that
a lock file from a previous boot of the same device is stale and can be
removed. This is implemented only for Linux and Apple operating systems.
Task-number: QTBUG-63425
Change-Id: I0b48fc8e90304e0dacc3fffd14e8e3a197211788
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This allow retrieving the value of the known PMTU for the current
socket. This works on Linux (IPv6 and IPv4) and FreeBSD (IPv6 only) --
the other OSes don't have the necessary API.
Note: do we need add IP_MTU_DISCOVER?
Change-Id: I6e9274c1e7444ad48c81fffd14dcaf97a18ce335
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We document that -1 is not a valid value. The Windows structure's type
is unsigned, so the value is actually ULONG_MAX.
Change-Id: Ic632b4163d784b83951cfffd14f668645c4da3a9
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The issue was introduced by eaee1209f0, so
it affected only 5.9.2.
[ChangeLog][QtCore][QSemaphore] Fixed a regression that would make
tryAcquire() not to wait forever if the timeout was a negative
value. Note: new code is advised to only use -1 to indicate "forever",
as some other functions taking timeout periods do not accept other
values.
Task-number: QTBUG-64413
Change-Id: I57a1bd6e0c194530b732fffd14f58fce60d5dfc9
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
on Ubuntu_16_04 and openSUSE_42_3.
Task-number: QTBUG-64446
Change-Id: If8fff2823f041428852822470a2f00157795558b
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This brings us to almost parity with the C++11 Random Engine API
requirements (see chapter 26.5.1.4 [rand.req.eng]). We don't implement
the templated Sseq requirements because it would require moving the
implementation details to the public API. And we don't implement the
<iostreams> code because we don't want to.
Change-Id: Icaa86fc7b54d4b368c0efffd14f05ff813ebd759
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Since we don't document how many bytes one needs (it's 2496), it's
difficult for the caller to provide just enough data in the seed
sequence. Moreover, since std::mt19937 doesn't make it easy to provide
the ideal size either, we can't actually write code that operates
optimally given a quint32 range either -- we only provide it via
std::seed_seq, which is inefficient.
However, we can do it internally by passing QRandomGenerator to the
std::mersenne_twister_engine constructor, as it's designed to work.
Change-Id: Icaa86fc7b54d4b368c0efffd14f0613c10998321
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Now only QRandomGenerator::system() will access the system-wide RNG,
which we document to be cryptographically-safe and possibly backed by a
true HWRNG. Everything else just wraps a Mersenne Twister.
Change-Id: I0a103569c81b4711a649fffd14ec8cd3469425df
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Since we're adding a deterministic generator that inherently does not
use syscalls, and people should really use that one by default, there is
no point in optimizing the secure generator wrt syscalls. Besides,
keeping the random data in memory for longer than needed is likely
inadviseable.
Change-Id: Ib17dde1a1dbb49a7bba8fffd14ed0871117fe930
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
To obtain "proper" directory behavior, we have to check against the
extracted "resources" directory instead of its qrc counterpart.
Change-Id: I4996ba74419945f78d356ad953a5b826ff663687
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
To obtain the file's handle, we need to obtain it from the extracted
test data instead of qrc.
Change-Id: I89c5c3f3a7da7e36205a439581a6d83efffdc07c
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Resource files are extracted to m_dataDir in tst_QFile::initTestCase.
Instead of trying to access the file from the resource on systems that
use qrc for bundling the test data, we have to use the files that were
extracted at the beginning of the test.
Change-Id: I35453fbdeb27e317d1342ff1cb7bbea9cebea14d
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
On some platforms (like UWP) files that are copied during
qfile auto tests are not writable by default. The cleanup will fail for
these files if the permissions are not set accordingly.
Change-Id: Id925dcadfc6b505c87f1f55d5ea05e286b60a5a5
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This patch works around Windows X86 on QEMU antics.
It appears on this platform the test behaves in some unpredictable manner:
- WSAConnect with 255.255.255.255 does not always immediately fail with
some error, so socket engine waits for a connection timeout (30 s.),
but the test itself
- only waits for 5 seconds and then tests that a request has finished with
error, which is not true (we are still connecting).
To make it work - whenever we have bearermanager feature enabled, set
a connection timeout to something reasonable, not 30 s.
Since we try to connect to each address twice, make timeout 1.5 s
(so it's 3 s. in total and still is < 5 s.).
Task-number: QTBUG-64264
Change-Id: I1d40c140667fca8402ec9344e66d313b6df54256
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
[ChangeLog][QtNetwork][QNetworkInterface] Added dnsEligibility() to
QNetworkAddressEntry to indicate whether the address is eligible or not
for publication in DNS or similar mechanisms.
Change-Id: Id3ae5f853d964358ac1ab19b525334a426e0e052
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
[ChangeLog][QtNetwork][QNetworkInterface] Added preferredLifetime() and
validityLifetime() to QNetworkAddressEntry that report the remaining
lifetime of the address in the network interface.
Change-Id: I292b84e2193979446e43344b0727642812cba630
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- Blacklist ioHttpRedirectPostPut for Windows
- Amend 84396a3f93:
Keys need to be on subsequent lines
Task-number: QTBUG-62583
Change-Id: I6360ec7bd87de65a3294a0d22148f13579fcd292
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Similar to the problem found in QTcpSocket auto-test recently.
While the failure on CI looks differently (apparently, server process
starts but does not print anything), fixing the dependency does not
hurt and at least fixes the 'make check' scenario.
Change-Id: I8f29f3e492d22410533407a527f5fc8f664e7f5c
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This test was failing recently on Windows 7, mingw, x86. It's not
failing now and attempts to reproduce the failure on CI's VM were
unsuccessful. Anyway, just reading the code is enough to spot
race-conditions: two threads are accessing two shared boolean
variables without any protection.
It's unclear if these races were the reason why the test was failing,
but we fix them for good anyway. Also, a failure to start a thread
or to start listening on a TCP socket is not treated as XML-related
failure anymore and QSKIPped instead.
Change-Id: I5115ce6c33cafc91485f8cf6e7e268d954976556
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Resizing a QTreeeView section with double click or
resizeColumnToContents() does not respect the maximumSectionSize when
the resize mode is Interactive or Fixed. Since the documentation of
maximumSectionSize states that it should honor this property for those
cases either the documentation or implementation is incorrect.
This patch fixes the latter.
Task-number: QTBUG-64036
Change-Id: Ic14c8e444d50b9c50a117efed19d0bca7ec1cf82
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This test contains Oracle specific queries and will fail for other DBMS.
Currently it doesn't fail, because it is skipped for drivers that doesn't
support BatchOperations and only QOCI supports batch operations.
Change-Id: I8f1e7c7244726fa11c841023dec186553747a6b5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The test showed flakyness on Linux. It has been observed that its
windows overlap. Position the windows beside each other.
Change-Id: I4ff1b9cafaf753a6844b3dfabb576a07f74b396a
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
The milli-seconds since epoch value for an invalid transition is,
of course, invalidMSecs(), not invalidSeconds().
Added a comment while I was at it, explaining why we expect a
transition before the epoch, if such transitions are supported.
Change-Id: I0f376f9d69c0e6e79a309dc011943baa41175135
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... that become apparent after switching qtestlib to use enhanced mouse
event (a37785ec76). With the old code path,
where QGuiApplication was deducing event type it would deduce mouse release
event even when there wasn't one. The new code path doesn't do that, which
revealed an obscure problem when mixing QTest::mouse* APIs (where QWindow
overload goes through QWindowSystemInterface API and QWidget overload goes
through QApplication::notify() and sets mouse_buttons from there). What
happened in this specific test case "./tst_qtreeview selection statusTip" was:
// tst_QTreeView::selection sets mouse_buttons = Qt::LeftButton from QApplication::notify
QTest::mousePress(widget, Qt::LeftButton, ..)
// tst_QTreeView::statusTip
QTest::mouseMove(window, )
The old code path sees that position and state has changed, creates a fake
mouse event, which gets deduced as mouse release even if there wasn't one.
And by luck this happened to set mouse_buttons=Qt::NoButton. So when we use
mouse_buttons later to create QMouseEvent everything works as expected. With
the enhanced mouse we don't clear the pressed button from mouse_buttons (set
in tst_QTreeView::selection) as this is done only from press/release events,
then pass it to QMouseEvent and later because of that QApplicationPrivate::
pickMouseReceiver() returns nullptr.
The fix here is to use e->buttons when constructing QMouseEvent, instead of
relying on mouse_buttons which gets changed from various places and has other
issues that can not be solved without invalidating the current documentation
of QGuiApplication::mouseButtons() (e.g QTBUG-33161). Tests and any Qt code
in general should avoid using the fragile QGuiApplication::mouseButtons() API.
This patch does not affect the old code path (it continues working as before)
and fixes the issue described above for the enhanced mouse API. The enhanced
mouse API actually is better in a way that it does not get affected by button
state from test functions that run earlier, as opposed to the old code path
where every subsequent test function uses mouse_buttons in whatever state it
was left by the test functions that run earlier.
Not relying on mouse_buttons when creating QMouseEvent helped also to discover
other logic error. This caused an in incorrect button state for a mouse move
event that is generated for a release event that simultaneously changes a mouse
position.
Task-number: QTBUG-64043
Change-Id: I6ad8e49d8437ab0858180c2d0d45694f3b3c2d60
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
We can use the D-Bus / systemd machine-id file (which is a UUID without
the dashes) on systems with D-Bus. On Windows, there's a value in the
registry that is filled when Windows is installed, like on Linux. For
BSD systems, the kernel has a UUID we can use too, so extract that.
Task-number: QTBUG-63425
Change-Id: I27eaacb532114dd188c4ffff13d32f2e3c1d74bb
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
While removing insignificant flag in commit
38a0909d4e and blacklisting
autotests that still failed, qtbase builds didn't
verify VS2017. That broke qt5 builds which do build VS2017.
Task-number: QTBUG-64264
Change-Id: I5fdfa5dac6192f449a05146a9a422e428a710c84
Reviewed-by: Liang Qi <liang.qi@qt.io>
ultrix and reliant have not seen a release since 1995. dgux not since
2001. bsdi not since 2003. irix not since 2006. osf not since 2010.
dynix... unclear, but no later than 2002. symbian needs no mention.
All considered obsolete, all gone.
sco and unixware are effectively obsolete. Remove them until someone
expresses a real need.
Change-Id: Ia3d9d370016adce9213ae5ad0ef965ef8de2a3ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of waiting for the menu delegate to update each item,
we can attach an NSMenu to its NSMenuItem as soon as we update
the current window's menubar. This is safe to do because we
know that this is going to be the main menubar right after, so
we're not orphaning any NSMenuItem from its NSMenu at the wrong
moment.
By doing this, we also ensure that all menus from the active
menubar are reachable by the key-equivalent dispatching logic,
even before we display the actual menu.
This was shown in BigMenuCreator where, under the menubar's ASP
and SAP menus, all A*S submenus would be disabled. Furthermore,
on the same menus, SAP would show the same issue.
Added test in Menurama as well.
Change-Id: If6e7311072e6b53ad1cbced73623d1832aa0df8e
Task-number: QTBUG-57076
Task-number: QTBUG-63712
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
... by moving them in QTestPrivate namespace (qtesthelpers_p.h). This
header file is a convenient staging area for helper APIs, eventually
some could be moved to public QTest API.
This header file utilizes the same pattern as other qtestlib header
files - wrapping functions with QT_${LIBNAME}_LIB to automatically
enable certain APIs based on what is in the projects dependencies,
e.g. QT += widgets.
Change-Id: Ic0266429939c1f3788912ad8b84fc6e0d5edd68b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test is flaky on Unity due to regression introduced by QTBUG-39362.
Skip the test functions until QTBUG-39362 is resolved.
These test functions do not fail on Gnome and KDE, so the functionality
tested by check_cursorKeys* will be covered by other linux distributions
in CI.
Change-Id: Ifd1a7779a9728142424f4956dd6466c822ccde91
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Looks like I never even tested this. There were two problems:
1) when we asked for the recvmsg and sendmsg functions, we used the
wrong variable (socketDescriptor was still -1)
2) we extracted the destination addresses, but never set them in the
QIpPacketHeader object
The added tests confirm that this works on Windows, Linux, Darwin,
FreeBSD. There also seems to be a problem, obtaining the destination
address on an IPv4 socket with a dual-stack sender (I can reproduce that
on FreeBSD, macOS and Windows, plus an old version of Linux).
Task-number: QTBUG-63605
Change-Id: I638cf58bfa7b4e5fb386fffd14ea732bddbc0c42
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Both of the new toolchains (armv7 + arm64) have some problems with d-bus
tests. Skip them until the toolchain has been fixed.
Task-number: QTBUG-60263
Change-Id: Ic300f419635fb6b49b3ea7f48fa76c19088c88bd
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
If a window is blocked by a WindowModal dialog, it should not be
possible to trigger window shortcuts on that window if it receives
a WindowActivate event.
This currently happens if the blocked window gets clicked, because the
window becomes the active_window and then QApplication sends it a
WindowActivate event (this doesn't happen with application modal dialogs).
The correctWidgetContext() function calls QApplicationPrivate::tryModalHelper()
only if the shortcut context is ApplicationShortcut. This patch makes it
call even if the shortcut context is WindowShortcut.
Change-Id: Iff87d85bcae603a6a24128e0cedfa9d33b6485fd
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Make the function brace policy consistent.
Change-Id: Iaf1f05a63958f19927e9b1953da06f99a4eba644
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Currently, when two colors are equal except for their alpha values,
QCOMPARE produces the following failure message:
FAIL! : tst_Test::test() Compared values are not the same
Actual (colorA): #ff0000
Expected (colorB): #ff0000
By using the HexArgb format instead of the default HexRgb, we can
see the full hex string, with alpha values included:
FAIL! : tst_Test::test() Compared values are not the same
Actual (colorA): #88ff0000
Expected (colorB): #ffff0000
Task-number: QTBUG-55574
Change-Id: Id82c60a1b473ac6025a6f6ac560fce95a910d782
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test fails often and seems to be flaky.
Task-number: QTBUG-62583
Change-Id: Id3af283c89e392634a7af6e11bd05775a4295798
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
This test starts two processes - server and client - and requires
an external executable ('stressTest'). In .pro file we have SUBDIRS
containing both 'test' (test itself) and 'stressTest' (client/server app),
but there is no explicit dependency and as result we run the test before
we build 'stressTest' thus failing to start those processes. This patch makes
'test' dependent on 'stressTest'.
Task-number: QTBUG-36629
Change-Id: I286b08bcff86b9afc4bbee87a75e887527eaf5f2
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Discussed during Qt Contributor Summit 2017. We concluded that we don't
want to make these functions public, as they do not follow Qt coding
style API. Specifically,
qStartsWith(a, b)
is not easily understood which argument is the needle and which argument
is the haystack (same problem memcpy() has). Compare that to
a.startsWith(b)
which can clearly be read in English as a subject-verb-object sentence.
This commit removes the unit tests that called compare().
Discussed-on: http://lists.qt-project.org/pipermail/development/2017-October/031060.html
Change-Id: Icaa86fc7b54d4b368c0efffd14ee6205eb9043fb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Right now,this does really nothing. This commit is just to allow us to
transition the other modules (besides qtbase) to use the syntax that
will become the API.
I've marked three places to use the system CSPRNG:
1) the QHash seed
2) QUuid
3) QAuthenticator
I didn't think the HTTP multipart boundary needed to be
cryptographically safe, so I changed that one to the global generator.
Change-Id: Ib17dde1a1dbb49a7bba8fffd14ecf1938bd8ff61
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Add some helpers to convert the coordinates and change the code to use the
QWindow-based mouse test API. Remove mouse presses on the second and third menu
from task256322_highlight() since moving the mouse is sufficient to switch
menus.
Remove blacklisting/skipping of macOS and offscreen.
Task-number: QTBUG-63988
Change-Id: If3e94170d11df369aec199d13d54d39382a78723
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Neither the exit crash of QTBUG-21102 nor the Windows failure of
QTBUG-24226 appear to be reproduceable.
Add verbose error reporting to getErrors() and blacklist
getErrors:ftp-host which has been found to fail with timeouts
on Linux and ioHttpRedirectMultipartPost.
Task-number: QTBUG-21102
Task-number: QTBUG-24226
Task-number: QTBUG-62860
Change-Id: I6b29f6184e83de8ffebf6ff0d80606512dca6419
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It fails for me on Windows 10. Therefore, this is wrong.
FAIL! : tst_QHostInfo::initTestCase() 'networkSession->waitForOpened(30000)' returned FALSE. ()
S:\qt\qt5-msvc2017-x64\qtbase\tests\auto\network\kernel\qhostinfo\tst_qhostinfo.cpp(194) : failure location
Change-Id: Ib17dde1a1dbb49a7bba8fffd14ed5691472a4760
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Open failures due to sharing violations have been observed in Coin.
Change-Id: If7fbe01a454b3c343c0b87f73db50c28eae901c3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Guard the FILE * obtained by fopen() by a RAI class ensuring
the file is closed on destruction.
Change-Id: I9297f91ca2120238f3a44bad92bca5f920e01aa8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
tst_noqteventloop.cpp 'event' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'canFetchMore' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'fetchMore' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'hasChildren' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'rowCount' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'columnCount' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'index' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'parent' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'data' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'begin' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'end' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'updateState' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'drawPixmap' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'type' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
Change-Id: I2a0c5da15994619383c1f90fee311927e58d7af0
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
... the same way other tests do in this file.
Change-Id: Ifcaee084bd20c55d6b9f7ddcf35daebce2a02e07
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
There were a couple of corner cases where doing setPort() would result
in QUrl thinking that an authority was not present. Since the full URL
parsing implies that a host is always present if the authority is
present, then we also imply that setting the port number makes the host
be present too.
Change-Id: I69f37f9304f24709a823fffd14e67c12da18d69f
Reviewed-by: David Faure <david.faure@kdab.com>
1. Recently we have updated our receive window size to a larger value.
Unfortunately, this also results in auto-test pumping through
more data, which probably takes more time on CI.
At the moment we do not have any public API on QNAM's level to
customize HTTP/2 parameters (aka 5.10/FF and so on). So we use the fact
that QNAM is QObject and we can set a property on it. This property
is our Http2::ProtocolParameters object that allows us to configure:
- HPACK parameters (in 5.10 - noop)
- session receive window size
- different SETTINGS as described by RFC 7540, 6.5.2.
2. Undocumented environment variable to set ENABLE_PUSH is not needed
anymore.
3. In 5.11 Http2::ProtocolParameter will become a public API
and we'll introduce a new setter in QNAM.
Change-Id: If08fd5e09e7c0b61cf9700b426b60b5837b6b2e6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Ensure windows are cleaned up. Add scaling where native coordinates
are used.
Task-number: QTQAINFRA-1440
Change-Id: Ie080ff780c687418f4dc5d71fd49112486b217e6
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>