We need to blacklist the test since we need to get QtWayland in CI
Task-number:QTBUG-53648
Change-Id: Id98c18aa8f39766b5dbb859b085f1912c42339fe
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The stream in question is from prior to Qt 5.0 release, before
commit 718a2251be changed QDateTime
serialization format to store Qt::TimeSpec instead of the private
flag. The last byte was 0xff meaning LocalUnknown, but 0xff is
not valid in Qt 5.0.
It was just garbage that Qt up to now just accepted. With the upcoming
short QDateTime optimization, the results are worse.
Change-Id: I25d85d86649448d5b2b3fffd1450f57df17e7794
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
protocolServerSide test fails with 'ssl3-any' and 'tls1.0-any' combo
on RHEL 7.2 with OpenSSL v1.0.1e-fips, it would work as OPENSSL_NO_SSL2
code-path, but OPENSSL_NO_SSL2 is not defined, so socket is in state
connected while it's expected to be unconnected.
Task-number: QTBUG-53608
Change-Id: Ib321b95129a6ab5b0691b40cb4acc612125633b2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
setEmptyDefaultConfiguration - this test (and this was stated explicitly
in comments!) must be the last test to run, otherwise, it can make subsequent
tests fail.
-exitLoop must be in 'protected slots' section not to be executed as a test,
since ... it's aux function, not a test.
Task-number: QTBUG-53608
Task-number: QTBUG-53603
Change-Id: I49d6d57ba927ecc4f20ae2d9325ad02fa46b0922
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Only the OpenSSL backend is supported right now.
[ChangeLog][QtNetwork][SSL/TLS support] It is now possible to
set custom Diffie-Hellman parameters for QSslSocket-based servers.
Change-Id: I50148873132cd0ec7e414250b107b6b4cbde02ea
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
A recent fix now makes
authenticationCacheAfterCancel(http+socksauth)
work again, so un-blacklist it.
Added a helpful comment while I was at it.
Change-Id: I2d7eae8d80c12957d22659a82e5072301735c41f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
just like $$member(), but operates on a string value rather than a list
variable. it is the swiss army knife of cutting, providing equivalents
of left(), right(), mid() and reverse() all in one.
[ChangeLog][qmake] Added $$str_member() function.
Change-Id: I7c7c6c971db402fff41b428d32a4451f45400728
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
this is strlen(), but the name is matched to $$size(), just namespaced
to reflect that it operates on a string value rather than a list
variable.
[ChangeLog][qmake] Added $$str_size() function.
Change-Id: I56c8b863da244e66bd283257a66b197aa73b0e57
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
amazing how we managed to do without it for so long. ^^
the name is intentionally somewhat obscure to avoid clashes, and some
namespacing is good anyway.
[ChangeLog][qmake] Added $$num_add() function.
Change-Id: Ib7648b1f425ef096a87b51f158d0f1409e5c4daa
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
while implementing stacks and queues was possible before with the help
of $$member(), these functions make it much more straight-forward.
[ChangeLog][qmake] Added $$take_first() and $$take_last() functions.
Change-Id: I4922a5331780e468a42c663c9ad3c6456a95a6bf
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
POSIX.1-2001 allows quoting a zone name so that it can contain other
characters besides letters, by enclosing it in angle brackets ('<' and
'>'). This hadn't been used until recently (tzdata2016b), when the
Asia/Barnaul rule started using a zone name "+07" (the name variable
contained the value "<+07>-7").
Thanks to Paul Eggert for reporting and investigating the root cause.
Task-number: QTBUG-53071
Change-Id: Id5480807d25e49e78b79ffff1449bc410776cb66
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
There is nothing guaranteeing there will be a paint request after
resizeViewportFramebuffer() is called. However we must not be left
with a framebuffer with uninitialized content. So trigger an update.
Include also a half-hearted autotest. QOpenGLWidget (or QGLWidget)
viewports have not been autotested at all. Try to verify that it
is functional at least, even if we cannot check the actual output.
Change-Id: I34d78fe32e94c39dad919216b5a4f4bb2aea3cc2
Task-number: QTBUG-52419
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
The test was half-ported from Qt 4 and #ifdefed out depending
on WINVER. When it became active, it failed since it queries the window
handle too early in the process.
Move the code sending the message into showEvent() to ensure a window
handle exists and parent the listview properly to prevent a leaking
toplevel.
Change-Id: I74aa9ddfd0e88dd31e9258400fc3e473b6e0d92e
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
the only place where this actually saves a deep copy is the evaluation
of if(), but as a side effect the parser is now able to deal with not
null-terminated strings, which is kinda nice as well.
Change-Id: Ib6d08617aa79d2f9eaecd4906d4d548f34bf377d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
If applicationDisplayName has not been set, the signal is emitted when
applicationNameChanged() is emitted.
[ChangeLog][QtGui][General] Add
QGuiApplication::applicationDisplayNameChanged() signal.
Task-number: QTBUG-53076
Change-Id: I18494ad90bd8dec3f79ef5175a3a85e776560fd0
Reviewed-by: David Faure <david.faure@kdab.com>
This has been fixed in 5.6.1 but we can afford the extra test
to guard against regressions.
The setup for this test is two menus, one parent of the other.
The submenu is tearable. We open the parent menu, open its
submenu and then move the mouse cursor straight over the
submenu's tear-off area. The submenu should stay open even
after a short delay.
Change-Id: Ia8ad326d78dde31b6dd91b0ebacf0db1898715d4
Task-number: QTBUG-53068
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Makes it easier to apply similar changes across all related functions,
and to implement functions for new types by having the previous
approaches available in one place.
Change-Id: I3f0590d67d0e6deb1c6c856ab1de96b55b6af058
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This patch reduces paint events by removing code which sets native
widgets dirty in QWidgetWindow::handleExposeEvent. Native widgets are
also marked dirty in QWidgetPrivate::drawWidget, so it is enough for
proper painting.
This restores Qt4 behavior when one resize means one repaint for native
widgets. Without this patch the native widget is marked as dirty on
every expose event, so one repaint is from syncBackingStore and second
(or more) is from marking the widget dirty explicitly.
This patch improves performance of native widgets and it also reduces
locks when paint event is v-synced, e.g. on OpenGL swap buffers or on
any other technology like VDPAU, VA-API, etc.
Added autotest for checking number of paint events for native widgets.
Task-number: QTBUG-50796
Change-Id: I4e1649069e2e73d15b038fd1834d0551915252ee
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QMenuBar now receives a parent changed event for each of its parent,
grand-parent, ... This fixes a crash caused by an invalid QWidget
pointer and makes sure the keyboard shortcuts events are relayed to the
menu bar in all parenting/re-parenting cases by installing an event
filter on each parent
Task-number: QTBUG-53205
Change-Id: I419e6cbc52e28a67fb08a848a7161b4cb8ae4ae5
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
make the 'cleaned' more robust by making sure we do not read past the
buffer in some cases. We must also use resize and not reserve on the
outpt buffer because reseve is meant as a hint and we are not supposed
to write past the size of the QByteArray even if it is reserved.
[ChangeLog][moc] Fixed crash on file ending with \\\r
Task-number: QTBUG-53441
Change-Id: I901e6c0ffc7f8877de3d07fd08cf26495461d294
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Replace the pointer member test widge by a widget
instiantiated on the stack where needed.
Remove empty functions.
Change-Id: Ie2da1d88bb23e56e85a2c57cc28220d74c63fae1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Use one simple widget of a suitable size per-test instead, removing
the need to reset palettes and fonts and to hide and re-show the
widget.
Task-number: QTBUG-38858
Change-Id: I3096af91ba68e419ad7383e59bcc5838c2363e32
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
QVariant::canConvert<Enum> was returning true for everything can can be converted
to integer, but not for integer itself. That's because in QVariant::canConvert
we set the targetType to Int of it's an enum, but the Int->Int case was not
on the conversion matrix. So this commits adds it to the conversion matrix
and now QVariant::canConvert<Enum> returns consistently true for int itself.
But even tough canConvert returned true, it did not actualy do any conversion
to the enum type itself. Fix that by handling the case properlt in 'convert'
[ChangeLog][QtCore][QVariant] Fixed QVariant::canConvert and conversion from
integer types to enumeration types.
Task-number: QTBUG-53384
Change-Id: I6ac066f3900e31bfcea7af77836ddfc7730bd60b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Introduce a function going up the widget hierarchy determining a QTransform
for mapping the coordinates applying the transformations of any QGraphicsView
instances found. In mapFromGlobal(), use the inverse of it. This fixes the
case of widget hierarchies embedded into QGraphicsView with transformations.
Increase fuzz in the tests due to float rounding errors.
Task-number: QTBUG-41135
Task-number: QTBUG-50030
Task-number: QTBUG-50136
Task-number: QTBUG-52507
Change-Id: I507e0bccd546250fe9c2d1b74ef38657d61490b4
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
So we know what we're looking at if there's a test failure. This is like
QNetworkInterface.
Change-Id: Id75834dab9ed466e94c7ffff1444bf51f615e944
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QFontDialog test will currently fail for some PCF bitmap fonts
because the list of smooth sizes it uses to populate its size list
contains unsupported sizes. We work around this by adding
QEXPECT_FAIL when we detect that the failure is going to happen.
Task-number: QTBUG-46056
Task-number: QTBUG-53299
Change-Id: Ia665cca220f3622405d1a2336e8d587545cccbc6
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This reverts commit 11ad50074b.
Unfortunately, udpsocket strikes back this time on OS X < 10.10 -
never seens these test failing before. Since this prevents 5.6->5.7
merge, I have to revert it until the problem investigated/fixed on OS X.
Alas :(
Change-Id: I52f6512d88c25d2e3071cb845e91faefbd455e27
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
In commit c6c9304, the earlier size limit of 128 was raised to the
format's defined maximum of 256. But the required special storage of
this size in the image structures was not implemented. Hence,
attempting to store such big icons would result in invalid image
files.
Fix the size storing details, and add some autotests of ico format
writing since that was practically uncovered.
Task-number: QTBUG-53259
Change-Id: I00e17a04e90c32dcf1124ba5adaf53728fb74dc7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
[ChangeLog][QtNetwork][QAuthenticator] Fixed crash when
comparing a initialized QAuthenticator with an uninitialized
QAuthenticator.
Task-number: QTBUG-53338
Change-Id: Ib8b732b9c65c02ee542885e5d6fe9bd1589a6b1a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
All this code was skipped on all platforms, so keeping it is just
confusing.
Change-Id: I405d2e791b22a2494fe5ccac6e3bf08905dc4e5a
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This is a partial revert of 992f233c in Qt 4 repo. The rest of the
change cannot be reverted, since it added public API, but that
API might be useful anyway.
The patch was wrong, basically. QFont::exactMatch() should not claim
that you can get an exact match for a typeface alias. It also introduced
some weird inconsistencies: For instance, if the first font the alias
resolved to in FontConfig did not exist, then exactMatch() would return
false, even if it then resolved to the next one which existed. This
caused a test failure on OpenSuse, where the preferred font for "sans"
is Arial, which doesn't exist, so Roboto will be used instead.
[ChangeLog][QtGui][Important Behavior Changes] QFont::exactMatch() now
returns false when the provided typeface is an alias.
Task-number: QTBUG-46054
Change-Id: I7532d2879b492544620aa0d1d87dd493a4923af9
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
QXmlStreamReader also has QLatin1String overloads, which
greatly benefits parsers, since the vast majority of keys
in both JSON and XML are US-ASCII. This patch adds such an
overload to the JSON parser.
The value() function is all typical parsers need, so even
though many more QJsonObject functions taking QString could
benefit from the same treatment, value() is the single most
important one for read-only JSON access.
Add some more overloads, too, for functions that don't need
more internal scaffolding than value(). Requires adding a
dummy op[](QL1S) (forwarding to the QString overload) so as
not to make
QJsonObject json;
json[QLatin1String("key")]; // mutable
ambiguous between const op[](QL1S) and mutable op[](QString).
[ChangeLog][QtCore][QJsonObject] Added value(), op[] const,
find(), constFind(), contains() overloads taking QLatin1String.
Change-Id: I00883028956ad949ba5ba2b18dd8a6a25ad5085b
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Create parent nodes with the corresponding paths, not with
the absolute path of the child node. Otherwise we will get
incorrect QFileInfo at least in the following case:
QFileSystemModel model;
model.setRootPath("/usr/bin");
QModelIndex idx = model.setRootPath("/usr");
qDebug() << model.fileInfo(idx).absoluteFilePath();
Without the fix it prints "/usr/bin".
It's a regression triggered by 61cefb2f7a
(De-inline QFileSystemModel::fileInfo() and implement it efficiently).
Change-Id: I3b4e5f5b256711e27ad50824eaa8492dbc096808
Task-number: QTBUG-51586
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
the "generated by qt creator" header is not supposed to be checked in.
Change-Id: I7626c0bd16f83d81b3facd216a04e7d505942256
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The test passes on OS X now.
Task-number: QTBUG-8941
Change-Id: I7b57dc30ede7c1ed0bcb8bacb458ea56f222d987
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Sheets are no longer transparent on newer OS X
versions.
Change-Id: Iaaed5aea9c9b130a5d991acd36717b76c3927cfb
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
The Qt 5 unified toolbar implementation does not move
the toolbar to the “non-client” area. This test is
no longer relevant.
Change-Id: Ia32de2260f8ef400a0dc5acf3e5e3ff59083657a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
On some X11 window managers, 2 events are received when
hiding/reshowing and activating the window, which became
apparent after 91f536dd71.
Change-Id: I66fdc4f69d87ac898b18d5dfddc957617bb8f916
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Allow tmpfs filesystems to be reported, as they're often usable by the
user, mounted in /tmp and in /run (the fs for $XDG_RUNTIME_DIR).
But disallow anything whose device is not a pathname. This catches most
of everything else that wasn't specifically tested for before, like
virtual fuse filesystems, like GVFS.
Change-Id: I3e15a26e0e424169ac2bffff1417b7cee0f8ec97
Reviewed-by: Ivan Komissarov <ABBAPOH@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The path "/usrfoo" starts with "/usr", so if you tried to get
QStorageInfo("/usrfoo") when "/usr" is a mount point, you'd get the
wrong filesystem.
[ChangeLog][QtCore][QStorageInfo] Fixed a bug that caused QStorageInfo
to report information for the wrong filesystem if there is a mounted
filesystem at a path that is a prefix of the requested path (e.g., it
would report "/usr" filesystem for "/usrfoo").
Task-number: QTBUG-49498
Change-Id: I3e15a26e0e424169ac2bffff1417b7a27cd0132d
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
There's exactly one application that needs this functionality (kded/
kiod), but we should test it too.
Change-Id: Icaa7fb2a490246bda156ffff143d210c6f5f207f
Reviewed-by: David Faure <david.faure@kdab.com>
If we're linking to libdbus-1, qdbus_symbols_p.h #includes dbus/dbus.h,
which may be old and not #define the Unix FD macros. tst_QDBusMarshall
had the definition for one of the macros but not the other, so add the
missing second one.
Change-Id: Id69569111e7d4e619e22ffff144c35edcd6f348b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
The old code sometimes made incorrect selections when rows or columns were
hidden or moved. It used logical top left and bottom right indexes to create a
selection rectangle. However on moved or hidden cells a wrong rectangle was
made. This fix calculates a simple rectangle without hidden cells and makes use
of the row/column select functionality provided by the selection model, to make
the right selection.
[ChangeLog][QtWidgets][QTableView] Fixed a selection bug when rows or columns were hidden (QTBUG-50171)
Task-number: QTBUG-50171
Change-Id: Id186012af26da7b2051ff5eb1c13e6b7494cca77
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
QMetaEnum::key(n) returns the n-th key, which is not necessarily the one
of value n. For the key of value n, we want QMetaEnum::valueToKey(n).
Change-Id: Ic90fe6b1cbe84978a02fffff141bf4a06074917a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The C and C++ standards say it's undefined whether the preprocessor
supports macros that expand to defined() will operate as an ifdef.
Clang 3.9 started complaining about that fact.
One solution was to change QT_SUPPORTS to check for zero or one, which
means we need to change the #defines QT_NO_xxx to #define QT_NO_xxx 1.
The C standard says we don't need to #define to 0, as an unknown token
is interpreted as zero. However, that might produce a warning (GCC with
-Wundef), so changing the macro this way is not recommended.
Instead, we deprecate the macro and replace the uses with #ifdef/ndef.
Change-Id: Id75834dab9ed466e94c7ffff1444874d5680b96a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
BLACKLIST should make it, recent regression in QUdpSocket went unnoticed
(first) because of 'insignificant'. We'd like to avoid such regressions
in future (again, using BLACKLIST if needed and fixig the real problem then).
NB: BLACKLIST in this patch was extended to deal with previously unnoticed failures on
Windows and OS X. 'multicast' and related family of of functions on OS X
will probably stay like this (seems to be a Darwin's quirk), datagram
size related tests - fixed in dev or 5.7 (change is in nativesocket engine,
'bytesAvailable').
Task-number: QTBUG-52714
Change-Id: I039b05935a02983ce1648de449907dfa765f7db7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This patch QSKIPs all tests that:
- take to much time sitting in some QTRY_VERIFY or similar before failing
- result in 'not in fullscreen mode' warning (with PASS) - thus completely flaky.
- Where previously determined to not apply to OS X using QT_OS_MAC
The intent is to make the test run-time more reasonable,
both when running the test locally and on the CI system.
Reduce the BLACKLIST - to avoid a 'double elimination' the tests that are skipped now,
should not be BLACKLISTed so that we fix them for good.
Task-number: QTBUG-52974
Change-Id: I34dc2010d0debc6b5b99f2375a6da902b7a17b29
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Doing what this code section was doing is not valid use of the
preprocessor. Therefore, we don't have to have this behavior and are
allowed to change how moc parses this.
Change-Id: Id69569111e7d4e619e22ffff144b45ea91ae22e3
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The test used to output random character sequences which contained
terminal control characters. Change it to output plain ASCII and
Unicode syntax for non-ASCII characters.
Change-Id: Ifaa72f50242bd27416a8698a1f5152bc8b902898
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
[ChangeLog][QTestLib] It is now possible to use variables of
types with an explicit operator bool in the QVERIFY macro.
Change-Id: I2685df164a616f6a065d689867daa9ea1de78e08
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Q_OS_DARWIN is the general replacement for Q_OS_MAC,
but most/all of the MAC sections in this test are
OS X specific.
Change-Id: Ic54af9d3dce1e1952a57e15b74acdedf2af60c79
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Fix a warning about a missing case statement.
Change-Id: Ic89646704d62668cf83c463dbf6e9b549a4b5200
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
The test should not depend on qWait explicitly
Change-Id: I13c01c47c9f7bae8b0c30afa2ac8550dc0fbf028
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
[ChangeLog][QtNetwork][QSslSocket] TLS PSK ciphers are possible in server sockets.
Task-number: QTBUG-39077
Change-Id: Iaa854a6f50242deae5492f2e4759c727488995f5
Reviewed-by: Richard J. Moore <rich@kde.org>
Add more error messages on failures.
Task-number: QTBUG-25367
Task-number: QTBUG-25368
Change-Id: I064143a058b7b98d9d5eecab8b5da49f5307e1eb
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
newer versions of qt creator understand QMAKE_EXTRA_COMPILERS and
INSTALLS, so there is no need to list the files twice.
Change-Id: Iccf3cc3248daf3422b8c366c2eb2d2f46c5f08d1
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
QWindowsPipeWriter uses asynchronous API to perform writing. Once a cycle
has been started, the write buffer must remain valid until the write
operation is completed.
To avoid data corruption and possibly undefined behavior, this patch
makes QWindowsPipeWriter::write() take a QByteArray, which it keeps alive
for the duration of the write cycle.
Autotest-by: Thomas Hartmann
Task-number: QTBUG-52401
Change-Id: Ia35faee735c4e684267daa1f6bd689512b670cd2
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Remove documentation of enumeration values and code from manual test.
Change-Id: I8e6cbbe11ab38421fb29595ae79351f5a919ff70
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
As of 5.7, HB-NG is the default shaper engine.
Change-Id: Ia5400444a5e387fa6b56de47fabc6f1c2c166f85
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Add a named comparison method that allows the caller to
specify in how far a translation between IPv4 and IPv6 should be
performed before comparing.
Change-Id: I9aeffcd4539a6c0537c083c4553357b22167df3f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix regression in a7b0cb467c which caused
it to be hard to start scrolling at the ends of a scroll-view if using
fine grained scrolling events.
Change-Id: I55f3210150b993281545c3ad5a7356d892fa30b5
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The widget is hidden, reshown and tested for active window, which
is flaky. Add a call to activateWindow() which increases
the chances of it becoming the active window should another window
appear.
Change-Id: Ibbecdbc43e2ac9638aec497c47fffaaffa1855af
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
On some operating systems, tzdata files carry the Local Mean Time (LMT)
for the city in question, which better represents how time was tracked
before standard, hourly timezones were introduced in the early 20th
century. The test was asking for the data for 1653-02-09 and assumed
that it would find the first Central European Time (CET) rule, which
Germany didn't start using until 1893-04-01.
This fix allows us to remove the blacklist that had been applied to this
test without investigation. It wasn't related to OpenSUSE, aside from
the fact that OpenSUSE tzdata carries the LMT data.
Change-Id: Id5480807d25e49e78b79ffff1449bdaf46901367
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Miter limits below 1.0 are not valid in PDF and trigger an error in the
Reader. This change enforces a minimum miter limit of 1.0, and it adds
a manual test for producing a PDF file demonstrating this issue.
Task-number: QTBUG-52641
Change-Id: I1c78b1c4a44579e95e1cddfb459926d304e60165
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Where "correct" is defined by what std::shared_ptr does as well as what
happens when an intermediate QSharedPointer of the exact type of the
constructor behaves
That is,
QSharedPointer<X> ptr(new Y);
Behaves like
QSharedPointer<X> ptr;
{ QSharedPointer<Y> tmp(new Y); ptr = tmp; }
Change-Id: Id75834dab9ed466e94c7ffff14455d445f72592b
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
libdbus will send a local signal if connection gets disconnected. When
this happens, end all pending calls with QDBusError::Disconnected.
Task-number: QTBUG-51649
Change-Id: I5c7d2a468bb5da746d0c0e53e458c1e376f186a9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is not exhaustive, but was enough to discover ICEs.
Change-Id: Ib60be1d298a66b72e3eb9b75ad538f0bf15b5f62
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Simo Fält <simo.falt@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Basic optimization of conversion from indexed8.
Task-number: QTBUG-35747
Change-Id: Ic9d32789769eadb05fbecfebf2d2f2c87d66610b
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Override preceding Common-s with a subsequent non-Inherited,
non-Common script.
This produces longer script runs, which automagically improves
the shaping quality (as we don't lose the context anymore),
the shaping performance (as we're typically shape a fewer runs),
and the fallback font selection (when the font supports more
than just a single language/script).
Task-number: QTBUG-29930
Change-Id: I1c55af30bd397871d7f1f6e062605517f5a7e5a1
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
[ChangeLog][QtCore][QLibraryInfo] Added QLibraryInfo::version(), which
returns the current version of the Qt library as a QVersionNumber
object.
Change-Id: Ifea6e497f11a461db432ffff1448d4dc84ef57b1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Since they are non-characters and should not be used for text
interchange, it stands to reason that they should not appear in
unencoded for in a URL. To change the behavior, we just need to toggle
a simple flag for QUtf8Functions.
This behavior also matches the recommendation from RFC 3987. We do not
usually follow recommendations from that RFC (as it is generally
believed to be a bad RFC), but this one seems like a good idea.
Change-Id: Ifea6e497f11a461db432ffff1447486c623c12bd
Reviewed-by: David Faure <david.faure@kdab.com>
Pushing the mouse rapidly to the top left corner causes KDE / KWin to
switch to "Present all Windows" (Ctrl+F9) mode, showing all windows.
This has been observed to be triggered programmatically by
QCursor::setPos(0, 0) if there is no other window beneath and apparently
depending on the perceived mouse "speed".
Suppress this by using the bottom right corner for XCB.
Change-Id: Id18d2f45a095ed4d4f365f010cf45a20b0d9435e
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
We have a bug that proximity events are generating them spuriously;
this is a way of testing it.
Task-number: QTBUG-52921
Change-Id: I490dfcf8d5b325f612b733e29fd49de9418bb19e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Currently, a tab's text is used as its accessibleName.
When a tab's text is empty, there is no API to set
the tab's accessibleName. The two APIs are added to
set and return the accessibleName property of a tab.
Task-number: QTBUG-46530
Change-Id: Idf88b5f905fe66c6365ea0eeb650e74211db90e1
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
The "path" of a mailto URL isn't a file, so we shouldn't try to do
glob-based matching. I was getting application/x-ms-dos-executable
for a .com domain and application/x-perl for a .pl domain...
Change-Id: Ifc346c3bba83ba1a8476db3202492f4c2e4d52bb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Suppress message dialog of the test helper as does QTestlib.
Task-number: QTBUG-52714
Change-Id: I5efd7d72f77c7689500ecaccf46f1f9dfb312140
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Use the correct parent path for the renamed file when creating
QFileInfo. It must be a path to the parent directory, not to the
root directory of the model.
Modify tst_QFileSystemModel::setData() to test renames in subdirs
of the root directory of the model.
Change-Id: I69d9e3a937616857a81617791ed118af3f6eea05
Task-number: QTBUG-52561
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Return pixmaps with device pixel ratio similar to QScreen::grabWindow(),
cf c0963486ce.
Adapt kernel tests accordingly.
Task-number: QTBUG-52137
Change-Id: I9ce276d5e2d87ae0d39c8639267d1ac283fed854
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The old code incorrectly calculated visual region for a selection (specified by
QItemSelection object) in case of reordered / swapped rows or columns. It used
the leftmost and rightmost (upmost and downmost for vertical mode) logical
indexes directly. However some middle logical index (in case of reorder) may be
the leftmost or rightmost visual index. In such cases the repainting didn't
work properly. This fix first checks whether reordering / swapping is in use.
If it isn't (ie visual=logical) we use code similar to the old code. Otherwise
the new code scans all selected logical indexes, translates them into visual
ones and gets the correct leftmost and rightmost indexes.
[ChangeLog][QtWidgets][QHeaderView] Fixed a repainting issue when items had been reordered.
Task-number: QTBUG-50171
Change-Id: If6afabebf445cf32a8e0afe262b6ee149e7c4b2b
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Removes spacing in QGridLayout when the QWidgets inside of the QGridLayout
are hidden, by checking if the sibling is empty, thus duplicate
spacing can be avoided.
Task-number: QTBUG-52357
Change-Id: I45475e7b264f94ef3bec5f9a4b8cbaa1d53ec6dd
Reviewed-by: Karim Pinter <karim.pinter@theqtcompany.com>
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
This modification enables to use notification feature of SQLite with Qt
SQL driver, enables to subscribe for notifications and also to remove
notifications. close() is added to destructor to unregister
notifications in case it is used in multiple threads.
[ChangeLog][QtSql][SQLite] Adding notification feature to SQLite driver
Change-Id: I8b98787f5214a406357646a98711a8ff6045a0dd
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
They were duplicating other enumeration values
(WindowTransparentForInput, WindowOverridesSystemGestures) and were
only supported on Windows CE.
Task-number: QTBUG-42897
Task-number: QTBUG-51673
Change-Id: I993a933ee2a3dc8a0ebd7ba6aef80b456f50a657
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The QTextBlockFormat::FixedHeight overrides the line height
regardless of its calculated height. If the line contains
objects or text which is higher than the specified line height,
using FixedHeight will cause them to overlap with the previous
line. This is not what happens in normal web browsers. The
expected behavior is that the line height given in CSS is the
minimum height, but that we still reserve space needed to display
everything without overlaps.
To make it possible for people to retain the old behavior, we
introduce the -qt-line-height-type property, which allows them
to override the default.
This also fixes output from toHtml() to use the new property
rather than set the minimum height of the paragraph or the
"line-spacing" property, which does not exist in either CSS nor
in Qt.
[ChangeLog][QtGui][Important Behavior Changes] When line height
is specified in pixels, this is now interpreted as the minimum
line height rather than an absolute line height to avoid overlaps.
To get the old behavior, use the -qt-line-height-type property in
CSS and set it to "fixed".
Task-number: QTBUG-51962
Change-Id: Ic2dde649b69209672170dad4c2de1e1c432a1078
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
std::shared_ptr supports it. To resolve an ambiguous overload when a
literal 0 is passed as a parameter, the normal constructors needed to be
made a template, like std::shared_ptr.
Task-number: QTBUG-52569
Change-Id: Id75834dab9ed466e94c7ffff14451417892d2148
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Add dragging functionality to the labels showing a pixmap
cursor, allowing for testing DnD with pixmaps with device pixel ratio.
Task-number: QTBUG-46068
Task-number: QTBUG-50938
Change-Id: If6781f380864e614efd4328e8b880b57cd900511
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Blacklisting those autotests that prevent us to get RHEL 7.2 in the CI.
The same tests have already been blacklisted for RHEL 7.1.
Change-Id: I2aa62647f7bd75681ea9e1d69bc62f9542fda5e2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
QFormLayout currently allows to remove a row only through takeAt, which
doesn't resize the internal structure used to store the layout-related
data. The implementation of rowCount uses that structure so it returns
a row count that doesn't match what the user sees.
The removeRow methods complement that be doing a "real" removal which
will also keep the row count in sync.
[ChangeLog][QtWidgets][QFormLayout] Added removeRow(), takeRow().
Task-number: QTBUG-15990
Change-Id: I204b219a837887e4bf95d1bc77407f1c53ae9819
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
When the formatting parameter wasn't exactly QUrl::EncodeUnicode, it
wouldn't encode, despite having to.
Change-Id: Id75834dab9ed466e94c7ffff1444bacc08dd109b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
The RFC does allow it. It even has examples showing them as valid. In
section 6.2.3, it shows:
http://example.comhttp://example.com/http://example.com:/http://example.com:80/
Change-Id: Id75834dab9ed466e94c7ffff1444b7195ad21cab
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
This benchmark requires QtScript1 headers, and can not build as is.
Change-Id: I98e57ca2db82270a0887462d7959ff00e352166b
Reviewed-by: hjk <hjk@theqtcompany.com>
The behavior was different in the variadic template code and in the C++98
code. The code without variadic template support was not copying the functor
object (e.g. a lambda) before calling it.
However, in the variadic template section, QtPrivate::FunctorCall::call
took the functor by value instead of by reference resulting in a copy.
QtPrivate::FunctorCall::call is a helper function for
QtPrivate::FunctionPointer::call which is only needed for variadic template
expension.
[ChangeLog][QtCore][QObject] If the compiler supports variadic templates,
no longer copy functor connected to a signal each time the signal is
emitted. Restoring the C++98 behavior.
Task-number: QTBUG-52542
Change-Id: I3ca20ef6910893b8a288e70af7de4c7b69502173
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The header defined a macro QTEST_NO_CURSOR depending
QT_NO_CURSOR or obsolete platforms Windows CE and Meego.
Replace usages by QT_NO_CURSOR in the tests.
Change-Id: I3edac88e684d1f932dd3b721bb1c1b3fe9144237
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Follow-up to commit 6fd205d5: document which version of danted shall
make one work-around redundant, document that another work-around is
still needed even with that v1.1.19; and remove a comment that
referred back to an XFAIL that commit 6fd205d5 removed.
Change-Id: I270b662528127c82184bff20b3cecea4f0c41b41
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
QSKIP() causes the whole test to be skipped, where this work-around
for a known quirk of the test server only requires skipping a single
Q_COMPARE(); the rest of the test passes fine without it.
Change-Id: Ie4612bd428f4cb4b342fad908cc2784fbadf069c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
QImage::convertToFormat was ignoring its conversion flag argument, only
performing dithering when converting to indexed formats.
This patch updates the documentation and implements ordered dithering
for other conversions.
Change-Id: I807353d61669694185b7e595ef262d80d9fbb3f1
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Before this change QFile::errorString function was returning an
"Unknown error". Now it will return the typical ENOENT string.
Task-number: QTBUG-45259
Change-Id: Ib7634f1aa5d91f77151cf92c58d3956e20a4cc6b
Reviewed-by: hjk <hjk@theqtcompany.com>
Use QFINDTESTDATA to find the socketprocess helper executable.
Now tst_QLocalSocket::processConnection() passes when started from Qt
Creator without adjusting the working directory.
Change-Id: I97ca3334a381b3cd646647487529bcd90b969528
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(for instance any global object which writes out to a config file in the
destructor). If the global cache isn't available anymore, don't use it.
Change-Id: I851a6e394d0b073aebf3ffd88b1966d424bfb92e
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Change-Id: I0c94a5c2846b48c8aea7ffff1435b8a7ccbd4d9e
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Add some extra checks to the parser to make sure that addresses
like "300-05" aren't interpreted as valid IPv4 addresses.
Change-Id: I12475eebc9452e060779bb05e2b4ad9512a28281
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
After 909d3f5c7, private families will not be shown in user interface.
Task-number: QTBUG-41318
Change-Id: I15ae77cacd2a27c9db4b1a8ffbb582416258988c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
- QMouseEvent::screenPos() should be global desktop position
- QDesktopWidget::screenNumber() should tell the correct screen
- QGuiApplication::topLevelAt(screenPos) should find the window where
the mouse is clicked
Change-Id: I9a63ab3ee1944b7246551d0f3d5e37f0d2aa5457
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
* A bunch of fixes and additions to the locale data
* Add new scripts from Unicode 8.0 and 9.0
* Map some potentially useful languages and territories
[ChangeLog][QtCore] QLocale data updated to CLDR v29
Change-Id: I759ccb27fe19be2722be913c5c2e6aa5f36e5c14
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Most libs use QMAKE_LIBS/CFLAGS, but some have other naming
conventions. Unify them into using QMAKE_LIBS/CFLAGS.
Change-Id: I39b188adc1f9a223a83b294c5315c3095a9c68de
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Most containers have them in Qt 5.7, so add them
to QStringRef, too.
Brush up the docs, use the const_iterator typedef
in the API, for consistency with QString's docs.
[ChangeLog][QtCore][QStringRef] Added reverse iterators,
rbegin(), rend(), crbegin(), crend().
Change-Id: I3d2884a1b2faae02c610ab3871552b65bc6e2521
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Remove Windows CE-specific files, #ifdef sections for Q_OS_WINCE and wince
.pro file clauses in library, examples and tests.
Task-number: QTBUG-51673
Change-Id: I102745aaca9d9737f2108fe7618111743d5ae980
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Our handling of plugins when Qt is build statically is
nowadays good enough, so we don't need to build the
JPEG and GIF support directly into Qt for static builds.
Let's simply always build them as plugins.
Also simplify the logic in configure, and get rid of the
no-gif, no-jpeg and no-png config variables.
[ChangelLog][Build system] JPEG and GIF image support is now
always built as a plugin. Removed -imageformat-[jpeg|gif]
arguments to configure.
Change-Id: Ic01559ff406c966807b3be8761252e8802adcdf7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
According to RFC 2640, FTP uses UTF-8 encoding. Fix the conversions
accordingly.
Task-number: QTBUG-52303
Change-Id: I615199b3d074fc3861f25df113dda672525766b6
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Remove #ifdef sections for Q_OS_WINCE and wince .pro file clauses in library
and tests.
Task-number: QTBUG-51673
Change-Id: I552b3fe8d6e0eb7c8c7b3a3d41558e5e21904dd2
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Ensures that QStyleOption is correctly initialized.
This prevents possible styling issues due to
QStyleOption's reporting version 0, see qstyleoption_cast.
This enables users to handle more cases in their QProxyStyle.
For now the test is only used for QCommonStyle.
Change-Id: I768db00b12b46890343fffe44e4f562762e9cf80
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Instead of relying on the QString relational operators to
implicitly convert the QChar to a QString, add relational
operator overloads that compare the QChar without first
turning it into a QString, saving one memory allocation
per comparison, and allowing to mark the operation as
nothrow.
Consequently, in tst_QStringBinOps, verify now that all
relational operations are noexcept.
The added overloads make QChar ==/!= int comparisons
ambiguous. De-ambiguate by providing a constrained
template that matches int and nothing but int (otherwise,
the QChar and the int versions would compete for a
QChar::SpecialCharacter argument, and end up creating
new ambiguities). This solution may not be perfect, but
it can be easily extended should more ambiguities crop up.
The existing overload deals with all patterns found in
qtbase.
Change-Id: I4156d918e9b9134c1da684b8b69e0ee526ad24e3
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
For QChar <> QStringRef, equality and inequality were already provided
(via QChar -> QString implicit conversions, to be fixed in a separate
patch). Missing were the less/greater than (or equal) operators.
Added.
For QChar <> QLatin1String, all relational operators were missing.
Added, too.
[ChangeLog][QtCore][QChar] Added missing operator{<,>,<=,>=}
comparing against QLatin1String and QStringRef.
[ChangeLog][QtCore][QChar] Added missing operator{==,!=}
comparing against QLatin1String.
Change-Id: I9941fe7e7281ea560b3bd5970cb9651ffadc1495
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Don't access first() of a potentially-empty QList.
Check for QHostInfo::error() first.
Also change to constFirst() to prevent a detach.
Change-Id: I91fa0bbfb21f62af29abdb23b4869a7f039b259e
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The flags here are passed to a private QVariant constructor, and they
really represent a boolean - IsPointer or not.
Because the flag for the key_type was incorrectly populated with the
flag for the value_type, memory would be corrupted when using a mapping
type whose value_type is a pointer, but whose key type was not, such as
QMap<QString, int*>
This typo has been there since the concept was introduced in commit
v5.2.0-alpha1~807 (Add container access functionality for associative
containers in QVariant., 2013-04-05).
Task-number: QTBUG-52246
Change-Id: I9ecb13c603015eed2dc2ca43947fa0ecd6be8b5a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
People use this, so make sure there's a test for it.
I don't expect this test to fail, but static and
dynamic checkers should be presented with this
use-case, so they have a chance of warning, because
certain implementation strategies of QPointer may
make this code undefined.
Change-Id: I334bd73204ba4e186c4098fc6b7188917407e020
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Removing blacklistings from tests that are now passing.
Change-Id: I00aa1ce286d3e7715fb4bee4a36d0d77049a29ae
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
Some strings were drawn with a different size or scaling than what the
string itself said, causing confusion.
Change-Id: I4b187cba6d467cfa0900576bdf451052baa806e6
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
If moc is invoked with the @ argument and no options file is specified
or the options file cannot be read, do not try to parse the empty
arguments list. Otherwise QCommandLineParser will print an additional
error message that is of no value for the user.
Task-number: QTBUG-51847
Change-Id: I9aa1eb20a44097b553123be8bc6fded87473a03a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The test is preventing us to take RHEL 7.1 in the CI for Qt 5.7.
Changed the paintEvent() test to be less strict about the paintCount.
Task-number: QTBUG-51809
Change-Id: I84f797442e38c66dc23862e92eda6db08bcac368
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QImage::pixel() assumed that the color table was valid
for the values in the bitmap. This was always wrong
for indexed images with explicit no color table set and
was wrong for mono images that were constructed from
preexisting data.
For mono images, we default to a black/white color table,
like we do when constructing with uninitialized data.
For indexed image, we always default to no color table,
but instead of crashing in pixel(), we warn and return
an undefined value.
[ChangeLog][QtGui][Image] Fixed possible crash in QImage::pixel()
for mono or indexed images.
Change-Id: Ieaf19c03984badddfd06e1855a7e287b862adc70
Task-number: QTBUG-50745
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Remove #ifdef sections for Q_OS_WINCE and wince .pro file clauses in library,
and tests.
Task-number: QTBUG-51673
Change-Id: I55f61845c3b54027c467a5c59c122e7d16955358
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Cleaning out the workarounds for the discontinued "Embedded Android"
platform of Boot2Qt.
Change-Id: I0ff9d770e82a43457fb7e5da0428f4597ead4038
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This change disables tests which require QtGui.
Change-Id: Ib647afd086f54536054cb4c0cde5696d762ee8c4
Reviewed-by: Stephen Kelly <steveire@gmail.com>
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
The old code converted QRectF into QRect when applying the offset. Change
the offset point to QPointF and change the conversions accordingly. Add an
autotest similar to that of QPlainTextEdit.
This minimizes rounding errors and prevents conversions since
the input method logic mostly uses qreal.
Task-number: QTBUG-51923
Change-Id: I0c2f80ccae028d8bbbb97ec603f8782f69959c76
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Remove #ifdef sections for Q_OS_WINCE and wince .pro file clauses in library,
examples and tests.
Task-number: QTBUG-51673
Change-Id: I3706336395620522ceda414d7437295d9ec64f16
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Determine offset point to similar to QTextEdit::inputMethodQuery()
and add an autotest.
Task-number: QTBUG-51923
Change-Id: I8232eb348063e2cd95d0632fe74a6eb30c897eda
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Update files using old header.LGPL3 to header.LGPL
Update files using old FDL template to use new one
Update files using old BSD template to use new one
Change-Id: I36a78272516f9953d02956522f285b40adfc8915
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Subjects each *.png file that matched grep -law "sRGB" to:
pngcrush -ow -brute -rem allb -reduce
(Two needed -force but did get smaller.)
Change-Id: Ia030f0bc1d3617ba716bcc26677ff919ef58423c
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Its currently not possible to style the arrows with QCommonStyle because
drawPrimitive from QCommonStyle is called instead from the proxy.
Change-Id: I910b13df110601cb18578bc16edfa5ddaa17bbd2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The previous implementation overwrote multiple 'time' parts in the
qSetMessagePattern with the last setting in the pattern line.
%{time}%{time process}%{time boot} ended up to be output as if
%{time boot}%{time boot}%{time boot} was set.
This fix keeps the arguments of each individual 'time' part.
The same holds for multiple 'backtrace' parts. The previouse
implementation overwrote multiple 'backtrace' arguments with the
arguments of the last occurrence.
This fix keeps the individual arguments for the 'process' parts.
The individual arguments are applied in qFormatLogMessage.
A new test to verify the individual 'time' arguments application
is added, too.
Task-number: QTBUG-51944
Change-Id: Ib757614a482c5f31ed0a61b550daa2eea4b907b4
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QWindowsPipeWriter doesn't write in a separate thread
anymore.
Change-Id: Id978bfdfa2531be91cce94476ab9b0dff237bd61
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Drop addSub() test. It executes exactly the union of fetchAndAdd()
and fetchAndSub(), which have already had their UBs fixed.
No need to do fixes in duplicated code.
Change-Id: Ib72caab0310fce3ff9a40c261d8a38518f91ecaf
Reviewed-by: David Faure <david.faure@kdab.com>
Commit 0307c008 removed the buffering of data-to-be-written from
QWindowsPipeWriter, because it was assumed that users of this class
(QProcess and QLocalSocket) already buffer data internally.
This assumption was wrong for QLocalSocket. The following sequence
localSocket->write(someData);
localSocket->write(someMoreData);
would not write anything on the second write.
Add a write buffer to the Windows implementation of QLocalSocket.
Task-number: QTBUG-52073
Change-Id: I6d0f03a722ec48138cbde3e2f69aae7dafe790d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The most visible problem is that changing selection model didn't update()
the view, resulting in the old selection/current item still being drawn.
In general trigger the handlers for when the selection/current item
changes.
Change-Id: Ib3b2ad70412e6a21a182d4c173e617710bcc630d
Task-number: QTBUG-50535
Reviewed-by: Stephen Kelly <ske@ableton.com>
Set input method attribute to be aligned with read-only
value in QTextBrowser initialization
Task-number: QTBUG-52071
Change-Id: If0e64bf09e2a2d505ed66fcbfb8cd12ae39844d3
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
This patch adds a new option, QCommandLineOption::ShortOptionStyle, which helps
applications (such as compilers, so moc and now qdoc) which need to mix long-style
and short flags.
[ChangeLog][QtCore][QCommandLineOption] Added flags() and setFlags() methods.
Added ShortOptionStyle and HiddenFromHelp flags.
Change-Id: I944ce56aff2b28ecd6bb9d2d23c4e726e9d06647
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The spawn code was only used to make QProcess work on QNX 6.5.0. Fork
works on QNX 6.6.0. The QNX spawn implementation has a flaw that causes
a deadlock in certain situations. When a working directory is specified
for the process, the QNX spawn implementation stops all threads except
the one doing the spawn so that it can temporarily change the process'
working directory. This can lead to a deadlock if the thread does
anything that conficts with something being done in a stopped thread.
QNX 6.5.0 is no longer supported in Qt 5.6.0 so we can just switch QNX
to the fork implementation and get rid of the spawn implementation.
Made a QNX specific adjustment to the hardExit test. There's a bug
in the OS that the test can run into because it does something that
normal applications wouldn't.
Task-number: QTBUG-47250
Change-Id: Ib32567d2c15ce651815858000035ac5aa6f35224
Reviewed-by: Dan Cape <dcape@qnx.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Application-Layer Protocol Negotiation (ALPN) - is a reworked revision
of Next Protocol Negotiation (NPN) we have in our OpenSSL code.
Can be used as a part of HTTP2 negotiation during TLS handshake.
Change-Id: I484ec528c81d4887a64749095ec292dfaec18330
Reviewed-by: Richard J. Moore <rich@kde.org>
This issue has been solved some time between 5.6 and 5.6.0.
We just make sure to protect against further regressions.
Change-Id: Ic3fdad901ed5f36792ae04b3d65047da95eea668
Task-number: QTBUG-50561
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The Qt CI does not have ninja, but the autotest can be used for manual
regression finding.
cd qtbase/tests/auto/cmake
qmake
make check
cd build
cmake . -DHAVE_NINJA=ON
ctest -R FINDTESTDATA
Change-Id: Ic3f3748f6ab04e37fa5287c59486e5cd46dcabb4
Reviewed-by: Stephen Kelly <steveire@gmail.com>
Math functions are linked in by default on INTEGRITY.
Change-Id: I737ae87c02b2321caca3975f69525731e839d1a7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The new imageAt() method pairs with the existing anchorAt() method, and
allows retrieving the source link of the image under the cursor.
We also expose the common logic between these two methods as an
additional formatAt() method.
[ChangeLog][QtGui][QAbstractTextDocumentLayout] Added imageAt() and
formatAt() methods, which respectively can be used to retrieve the
source link of the image under the cursor, or the QTextFormat of the
text under the cursor.
Change-Id: If09815dde91de6616edcb19c72c462dbf7abd8ef
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
canReadNotification() could return 'false' if either the socket has
been closed, or the read buffer has reached the maximum size. Because of
this duality, waitForBytesWritten() should not fail as a result of a
canReadNotification() call.
Change-Id: I9a15fa174a3b982a7ce404913caa38fc19f64622
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
Adapt the script to generate output for the new TeamCity format
added by fbd6acedac.
Change-Id: I9435382ec3daf80428c324c58434aa951841bf08
Reviewed-by: Borgar Øvsthus <borgar.ovsthus@fmcti.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
When a QCOMPARE of values of type QColor fails, their
name will now be printed.
Task-number: QTBUG-51124
Change-Id: I76565daa338f038ea4f452e47705e638d94eaeee
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
The API is incomplete since we can't show a tear-off menu
programatically. This could be useful when restoring the
application state on launch.
Change-Id: Ice1911b44a5b973680f67b0150efacf3d023c2c5
Task-number: QTBUG-47974
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
It is already blacklisted in openSUSE 13.1 and is a
known bug somewhere.
Task-number: QTBUG-46054
Change-Id: Ie2fb23bcede1871d3b9fa15644112fb2ab975c2b
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Apply the device pixel ratio from the widget unless Shift is pressed.
Task-number: QTBUG-46068
Task-number: QTBUG-50938
Change-Id: Ib806b7e545fa228043566800d22d1002728732bf
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
Previously WinRT was using the UTC backend which fails on all platforms
for some QDateTime autotests related to timezone items. Hence switch to
the Windows implementation for WinRT as well.
However, the windows backend does query the registry heavily, which is
not supported on WinRT. Instead use the API version provided by the SDK.
Long-term we might want to switch to this version on desktop windows as
well, as direct registry access would not be required and we could
harmonize the codepaths for both platforms.
Change-Id: I620b614e9994aa77b531e5c34c9be1da7e272a30
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
openSUSE 42.1 returns 2 font families comma separated
when querying monospace font families. Without splitting
we compared the family against the whole list.
Task-number: QTBUG-51336
Change-Id: Icd757e173aa8ffab713b83cf9e38b78aab00c07e
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Add a toggle for setting a triangular mask on the main window.
Task-number: QTBUG-50938
Change-Id: Id4a3ee0b80e170f4ee1d195e60ce7bfa8e524359
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
A test should not write to its directory.
Change-Id: I34dfc36387cf5a637b325be29c8a19ff51d9b9c3
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
For platforms with builtin testdata/sandboxed platforms we need to
change the current directory to be able to create files.
Change-Id: I440205c95dd6df1308c6bf24b1b0f67fd697feab
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Equality and inequality were already provided. Missing were the
less/greater than (or equal) operators.
Added.
Moved existing functions around and more similar to the new ones,
to make the whole code section a bit more manageable.
[ChangeLog][QtCore][QStringRef] Added missing operator{<,>,<=,>=}
comparing against QLatin1String and QString.
Change-Id: Idb3c4fa9b38421637987226f3cc1b77f5d4a6309
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
tst_qtabbar uses fixed values to check the minimumSizeHint and it fails
with screens that have a higher resolution. The test still uses the
default values, but now in the beginning it creates enough tabs so that
it goes over the default.
Change-Id: I3f891d2661288d7fad50ad522d73f634b3e91958
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
This is analogous to QObject::inherits() but only requires the
metaobjects rather than pointers to a QObject instances. This is needed
for type checking on the backend of Qt 3D where we do not have access
to QObject pointers.
Change-Id: I14d26c4cbb5cc3fbecb57725f2c14ee0ffda4a11
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
QRect::center() should be defined for any
QRect(x1,y1,x2,x2), INT_MIN <= x1, x2, y1, y2 <= INT_MAX
because the average of two signed integers is always
representable as a signed integer.
But not when it's calculated as (x1+x2)/2, since that
expression overflows when x1 > INT_MAX - x2.
Instead of playing games with Hacker's Delight-style
expressions, or use Google's patented algorithm, which
requires two divisions, take advantage of the fact that
int is not intmax_t and perform the calculation in the
qint64 domain. The cast back to int is always well-
defined since, as mentioned, the result is always
representable in an int.
Fix a test-case that expected a nonsensical result due
to overflow.
[ChangeLog][QtCore][QRect] Fixed integer overflow in
center(). This fixes the result for some corner-cases
like a 1x1 rectangle at (INT_MIN, INT_MIN), for which
the previous implementation could return anything
(due to invoking undefined behavior), but commonly
returned (0, 0).
Change-Id: I1a885ca6dff770327dd31655c3eb473fcfeb8878
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The compiler can statically check that this is undefined
behavior:
tst_qrect.cpp:3173:52: warning: integer overflow in expression [-Woverflow]
<< QRect(QPoint(0,0), QPoint(INT_MAX+(0-INT_MIN),INT_MAX+(0-INT_MIN)));
~^~
tst_qrect.cpp:3173:72: warning: integer overflow in expression [-Woverflow]
<< QRect(QPoint(0,0), QPoint(INT_MAX+(0-INT_MIN),INT_MAX+(0-INT_MIN)));
~^~
Fix by skipping the test (like most of the others are
in the block).
Change-Id: I359a5e16db6c660c9f11d7dd8fbb40730bd63887
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The existing code derived a helper class from QSqlResult and
overloaded two protected functions as public ones so the test
could call them after casting QSqlResults to that helper class.
Both the cast (which is a C-style cast, but with combined
static_cast and const_cast semanics) and the following member
function call are undefined behavior.
Fix by making the test class a friend of QSqlResult, and
dropping the casts.
Change-Id: I09de2e2b46976d01cfce25892aec6ad36881d3eb
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Tested on the Ubuntu 14.04 VM. The test didn't fail anymore with
2000 test rounds
Change-Id: Ic12c60e5ebf9c234358a6983bf87fa0a88d7886e
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
At the moment, only checks the relational operators, where
it already found some which do not compile. In order to
simplify the test, the missing operators are supplied by
the test harness until they are fixed in the library.
Change-Id: Ief5daefa68f15de5f8e559c9378ed83b715b69ee
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
Add a command line tool that can either take a list of window ids and output
information on them using a verbose debug stream or embed foreign
windows using QWidget::createWindowContainer().
Task-number: QTBUG-41186
Change-Id: I14e436b5d08828f5b78b29e0701daeffe11367d3
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
A test should not write to its directory. Amends change
d0b54cede8.
Task-number: QTBUG-47176
Change-Id: If15258b4aed199792fab422b7ac1d74e22a9e322
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
Suppose a client connects while the QLocalServer is still in the loop
that calls addListener. The connection would SetEvent(eventHandle),
but every call to ConnectNamedPipe would ResetEvent(eventHandle).
Thus, the connection is never detected by the notifier on eventHandle.
Callers of addListener must check the connection state of every
listener to make sure that no client connected while setting up
listeners.
Task-number: QTBUG-49254
Change-Id: Ia961927ea76973708e6e3f73510695eb5d6a0e4c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Only two tests inside tst_qstatictext required private symbols, so
we can enable the rest on all builds.
Change-Id: Id222ba01d9676c40b6447c1526ee127fcc2090d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Use the newly introduced QSysInfo::machineHostName() to determine
the host name in the shared header, removing the need to link
against the winsocket library. All Windows-specific .pro sections
can then be removed.
Task-number: QTBUG-51673
Change-Id: Iba990b886b16addd210639871065abde6de96516
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
In one code path the test checked for the emission of a readyRead()
signal without waiting for it.
This code path was never hit, neither on Windows nor on Unix platforms.
Change-Id: Ifbe464400a2a1ba8eab49bd60315289040e6bbde
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Factor out function to check on the pixel color that
outputs a verbose message on failure.
Change-Id: I2331fe45f35327d1ff8ae547a58d93a2e6fe9184
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Signed integer overflows and underflows are undefined
behavior. A test that invokes UB tests nothing, because
the standard permits any outcome.
Fix by guarding the respective operations so
they are not executed if they would overflow
or underflow.
Change-Id: I40354ee88f40e4b47b70eac7790dc3a79ac70a57
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This warning is triggered when we try to apply the Q_DECL_HIDDEN
attribute to a class in an unnamed namespace. Such classes are
already not exported.
qobjectdefs.h:175:108: warning: ‘visibility’ attribute ignored [-Wattributes]
qobjectdefs.h:198:108: warning: ‘visibility’ attribute ignored [-Wattributes]
Added a test on gadgets (and QObjects) in unnamed namespaces,
because qtbase currently does not contain such Q_GADGETs.
Done-with: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Ic747cc2ab45e4dc6bb70ffff1438c747b05c5672
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Some embedded servers use LF to mark the end of an individual header,
but use CRLF to mark the end of all the headers. The GoPro WiFi
interface does this, as an example.
Change-Id: I227ab73622c84f439a6cf8703d020393c4d8bf69
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
It now exists in QtGui.
Task-number: QTBUG-48849
Change-Id: I9107c96e0010252bc50bcb02ef006cb46bd942df
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
As found by GCC 6:
tests/auto/corelib/kernel/qmetatype/tst_qmetatype.cpp:1476:9: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation]
tn += ">";
^~
tests/auto/corelib/kernel/qmetatype/tst_qmetatype.cpp:1474:5: note: ...this ‘if’ clause, but it is not
if (tn.endsWith('>'))
^~
Fix += argument from char[2] to char as a drive-by.
Change-Id: I814dc58830934cac7fcf81eb7fd7564b2abeb631
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
tst_qkeyevent.cpp(140): warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?)
Change-Id: Id3e0eea125f7f7ec13f9b9428e034b922d2ce204
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
An empty read or a failed write on the underlying QIODevice of the text
stream would lead to an early return where we wouldn't correctly restore
the QIODevice::Text flag of the io device.
Change-Id: I5b632f45dea6ede3f408113556c3dad1b96574e2
Task-number: QTBUG-47176
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This change adds support for BackgroundRequestAttribute to local file request. It is useful
when opening files located in network drives where the file open operation could take several
seconds to complete. When this attribute is activated the QNetworkAccessManager::get call
returns the reply immediately and the user has to wait until QNetworkReply::finished signal
is emitted or QNetworkReply::isFinished function returns true.
Task-number: QTBUG-45925
Change-Id: Ie2019dd94fe04253d1ef6874811d7e749a5aad93
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
A receiver of TouchUpdate and TouchEnd events is determined either
as a widget which has an implicit grab for the touch point or as a
visible widget if there are no implicit grabs. The events are sent
if the receiver has accepted TouchBegin event or if it is subscribed
to a gesture. Before sending the events to the widget they are
delivered to the gesture manager. Thus, in order to detect gestures
for the widget, it must own an implicit grab or be a visible widget.
It can happen that the parent widget is subscribed to a gesture, but
doesn't accept TouchBegin event, as in the case of QScrollArea. Then it
will not get an implicit grab and gesture detection will be impossible.
Activate an implicit grab for such widgets. Also don't send TouchUpdate
and TouchEnd to them, because it's against the documentation.
Task-number: QTBUG-43277
Change-Id: Id767583991def6d76c48ad15eb39af822cad115d
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
QTcpServer::addPendingConnection() is protected, so it is possible to
add pending connections from a class derived from QTcpServer. This
derived class can get a QTcpSocket from somewhere else, in which case
d->socketEngine will not be set (or used). Given that it is possible to
add pending connections in this scenario, it would make sense to be able
to retrieve them as well.
[ChangeLog][QtNetwork][QTcpServer] Permit using a QTcpServer with
externally created QTcpSocket.
Task-number: QTBUG-51288
Change-Id: I830c10f1a881e2bca4e4ad716d8be865e1c27a9f
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The data function for this test re-used listenAndConnect_data that
has an additional column "connections" which was never used in sendData.
Thus sendData executed three times the same code which is just uselessly
burned CI time.
Copied the actually needed code of listenAndConnect_data to sendData_data.
Change-Id: I6cdb1c1b72cb4ce7be7c13e90eea30ac09a14914
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
If a user selected the text "foo" and typed "bar", upon pressing undo,
the text would change to "b". This is incorrect and does not match the
functionality of QLineEdit or the default behaviours of Windows/OSX/Ubuntu.
This was fixed by a change made to always merge two sequential inserts
if they are not part of the same block. Previously the selection delete
and the "b" were part of one edit block and "ar" was part of another.
With this change, the selection delete and "bar" are part of the same
edit block.
Unit test changes are part of a separate review (Part #1) since they
required changes in qtdeclarative.
[ChangeLog][QtGui][Important Behavior Changes] Fixed QTextEdit to match
undo functionality of QLineEdit to group two sequential inserts into one
undo action.
Task-number: QTBUG-38825
Change-Id: I76bf30e331e3526277c3e0ade58cf95b611fc117
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Add missing slash to the prefix pointing to the temporary directory.
Change-Id: I0d00f706af58214a9922758a60d097cab7d6bc9d
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Verify that the temporary directory could be created. Check whether
the gtk-update-icon-cache binary exists before running and skip cleanly.
Check successful execution. Fixes Windows warnings:
SKIP : tst_QIcon::fromThemeCache() gtk-update-icon-cache not run
.\tst_qicon.cpp(707) : failure location
QWARN : tst_QIcon::fromThemeCache() QTemporaryDir: Unable to remove "D:\\temp\\tst_qicon-DSSn9G" most likely due to the presence of read-only
files.
Change-Id: Ibc8f883121e62b30d71586bc64b42eb6c480925f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Calling qMin often prevents effective vectorization, and it is only
necessary when converting from formats with mixed color-channel widths.
Change-Id: I2a0f3f3fb528d45be1fd025758f9d915ee1736c0
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Using shuffle and align storing our quint24 format can be done much
faster. This in particular improves conversions to RGB888.
Change-Id: I179748706a33a43fd6f60f5c40287317418c8867
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Suppose the user connects QProcess::readyReadStandardOutput with a
slot that calls QCoreApplication::processEvents.
Assume the event loop did not handle events between QProcess::start
and QProcess::waitForFinished. The process writes to stdout and exits.
QProcessPrivate::waitForFinished calls drainOutputPipes which calls
QWindowsPipeWriter::waitForReadyRead. This in turn will trigger
_q_processDied via the readyRead signal and processEvents.
_q_processDied will delete the pid object and set pid to null.
After drainOutputPipes returns, _q_processDied is called again but it
must not be called if pid is already destroyed.
Prevent calling _q_processDied if pid is null.
Task-number: QTBUG-48697
Change-Id: Iee047938ee1529057a1a43d71f4e882750903c7e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Remove the member variable and instantiate only where needed
on the stack to prevent it from interfering with windows created
by other tests.
Remove flag Qt::X11BypassWindowManagerHint as it does not seem
to have any effect.
Task-number: QTBUG-51516
Change-Id: I3bf88bf148f365c57aaf989671f8b9c3c3f0d8e2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Use default timeouts for wait functions. The increased timeouts will
only have an effect if the tests fail.
Print process errors if the process could not be started, while we're at
it.
Contract consecutive "#ifndef Q_OS_WINCE" blocks.
Change-Id: I6324e4c5b91b89ebb2580635b88705bbda922907
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
This is what std::vector implementations usually do,
because it minimizes memory fragmentation and useless
allocations since no user will call clear() unless
she intends to append new data afterwards.
Fix calls to resize(0) that show how existing code
tried to work around the issue.
Adjust test. Port from QVERIFY(==) to QCOMPARE as a
drive-by.
[ChangeLog][QtCore][QVector] clear() now preserves
capacity. To shed capacity, call squeeze() or swap
with a default-constructed QVector object, see the
documentation for an example.
Change-Id: I9cebe611a97e027a89e821e64408a4741b31f1f6
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Virtually all code in Qt that inspects a QRegion does
so by calling rects(), which returns a QVector<QRect>.
But rects() has a problem: A QRegion that contains just
one rectangle internally is not represented by a QVector,
and the mere act of calling rects() makes QRegion create
one.
So, expose the fact that QRegion is a container of QRects
to users by providing iterators and begin()/end(), which
can be nothrow, since for the one-rectangle case, instead
of vectorize()ing the region, we just return pointers to
(and one past) the 'extent' rectangle.
As a consequence, the iterator type is just const QRect*,
but I think that whatever containers QRegion may use under
the hood in the future, it will be certainly one that is
layout-compatible with a C array.
No mutable iterators are provided, since QRegion maintains
a running bounding-rect, so a mutable iterator would have
to call into QRegion for every change, which doesn't make
sense.
[ChangeLog][QtGui][QRegion] Is now iterable as a container
of QRects: added {c,}{r,}{begin,end}().
Change-Id: I2fa565fac0c1d26e2c0937604b23763cd4e23604
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Given the flakyness of cursor positioning, loosen the check to only verify
that the cursor is outside the window. The hint is only active on Windows
depending on a system setting.
Task-number: QTBUG-51516
Change-Id: I474d251cc41e68f182baf8dba84eaf38d914d7ee
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This test has failed already in openSUSE 13.1 where
it has been marked as insignificant. Incorrect font
size is returned from a font dialog in tst_qfontdialog.
Task-number: QTBUG-46056
Change-Id: I7b5841e90d4cbe9d9573b46ec7dec64432160473
Reviewed-by: Akseli Salovaara <akseli.salovaara@theqtcompany.com>
It made us skip the rest of the test, not just the small set of
sub-tests that were conditioned by the if () in whose else it sat.
Change-Id: I5e914e0aeb9d5ba44b21966d071aaccbc590365d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
QTypeInfoQuery was introduced for 5.6 to decouple isStatic
and isRelocatable so old code continues to work. But since
this test still uses !isStatic to mean trivially-relocatable,
it will fail as soon as one of the checked types is marked as
Q_RELOCATABLE_TYPE instead of Q_MOVABLE_TYPE.
Incidentally, such a change is in the pipeline for Qt 5.7/5.8,
so fix the test by porting to QTypeInfoQuery. Do this in 5.6,
because that's when QTypeInfoQuery was introduced.
Change-Id: I06f815f26ca9b430e124c4a2f8de2a729999762b
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The coordinates need to be scaled before calling QPlatformScreen::grabWindow()
On return, set a devicePixelRatio on the pixmap.
Adapt the QWidget test to scale the grabbed pixmaps.
Fixes pixeltool displaying the wrong part of the screen when High DPI scaling
is in effect.
Task-number: QTBUG-46615
Change-Id: I12de7df0da669230cf0fae74f4a42d43f061d5ff
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
