SkLiteRecorder, a new SkCanvas, fills out SkLiteDL, a new SkDrawable.
This SkDrawable is a display list similar to SkRecord and SkBigPicture / SkRecordedDrawable, but with a few new design points inspired by Android and slimming paint:
1) SkLiteDL is structured as one big contiguous array rather than the two layer structure of SkRecord. This trades away flexibility and large-op-count performance for better data locality for small to medium size pictures.
2) We keep a global freelist of SkLiteDLs, both reusing the SkLiteDL struct itself and its contiguous byte array. This keeps the expected number of mallocs per display list allocation <1 (really, ~0) for cyclical use cases.
These two together mean recording is faster. Measuring against the code we use at head, SkLiteRecorder trends about ~3x faster across various size pictures, matching speed at 0 draws and beating the special-case 1-draw pictures we have today. (I.e. we won't need those special case implementations anymore, because they're slower than this new generic code.) This new strategy records 10 drawRects() in about the same time the old strategy took for 2.
This strategy stays the winner until at least 500 drawRect()s on my laptop, where I stopped checking.
A simpler alternative to freelisting is also possible (but not implemented here), where we allow the client to manually reset() an SkLiteDL for reuse when its refcnt is 1. That's essentially what we're doing with the freelist, except tracking what's available for reuse globally instead of making the client do it.
This code is not fully capable yet, but most of the key design points are there. The internal structure of SkLiteDL is the area I expect to be most volatile (anything involving Op), but its interface and the whole of SkLiteRecorder ought to be just about done.
You can run nanobench --match picture_overhead as a demo. Everything it exercises is fully fleshed out, so what it tests is an apples-to-apples comparison as far as recording costs go. I have not yet compared playback performance.
It should be simple to wrap this into an SkPicture subclass if we want.
I won't start proposing we replace anything old with anything new quite yet until I have more ducks in a row, but this does look pretty promising (similar to the SkRecord over old SkPicture change a couple years ago) and I'd like to land, experiment, iterate, especially with an eye toward Android.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2213333002
Review-Url: https://codereview.chromium.org/2213333002
201295.jpg on HP z620
(300x280, most common form of sRGB profile)
QCMS Xform 0.495 ms
Skia Old Xform 0.235 ms
Skia NEW Xform 0.423 ms
Vs Old Code 0.56x
Vs QCMS 1.17x
So to summarize, we are now much slower than before,
but still a bit faster than QCMS. And now we are also
far more accurate than QCMS :).
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2060823003
CQ_EXTRA_TRYBOTS=client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD-Trybot
Review-Url: https://codereview.chromium.org/2060823003
Reason for revert:
Still causing problems in Google3, e.g.
https://test.corp.google.com/ui#cl=124138817&flags=CAMQBQ==&id=OCL:124138817:BASE:124139560:1465227435491:219ffbdb&t=//third_party/skia/HEAD:dm
Original issue's description:
> Make SkPngCodec decode progressively.
>
> This is a step towards using SkCodec in Chromium, where progressive
> decoding is necessary.
>
> Switch from using png_read_row (which expects all the data to be
> available) to png_process_data, which uses callbacks when rows are
> available.
>
> Create a new API for SkCodec, which supports progressive decoding and
> scanline decoding. Future changes will switch the other clients off of
> startScanlineDecode and get/skip-Scanlines to the new API.
>
> Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
> PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
> updateCurrScanline(), which was only used by the old implementation for
> interlaced PNG.
>
> DMSrcSink:
> - In CodecSrc::kScanline_Mode, use the new method for scanline decoding
> for the supported formats (just PNG and PNG-in-ICO for now).
>
> fuzz.cpp:
> - Remove reference to kNone_ScanlineOrder
>
> SkCodec:
> - Add new APIs:
> - startIncrementalDecode
> - incrementalDecode
> - Remove kNone_SkScanlineOrder and updateCurrScanline()
>
> SkPngCodec:
> - Implement new APIs
> - Switch from sk_read_fn/png_read_row etc to png_process_data
> - Expand AutoCleanPng's role to decode the header and create the
> SkPngCodec
> - Make the interlaced PNG decoder report how many lines were
> initialized during an incomplete decode
> - Make initializeSwizzler return a bool instead of an SkCodec::Result
> (It only returned kSuccess or kInvalidInput anyway)
>
> SkIcoCodec:
> - Implement the new APIs; supported for PNG in ICO
>
> SkSampledCodec:
> - Call the new method for decoding scanlines, and fall back to the old
> method if the new version is unimplemented
> - Remove references to kNone_SkScanlineOrder
>
> tests/CodecPartial:
> - Add a test which decodes part of an image, then finishes the decode,
> and compares it to the straightforward method
>
> tests/CodecTest:
> - Add a test which decodes all scanlines using the new method
> - Repurpose the Codec_stripes test to decode using the new method in
> sections rather than all at once
> - In the method check(), add a parameter for whether the image supports
> the new method of scanline decoding, and be explicit about whether an
> image supports incomplete
> - Test incomplete PNG decodes. We should have been doing it anyway for
> non-interlaced (except for an image that is too small - one row), but
> the new method supports interlaced incomplete as well
> - Make test_invalid_parameters test the new method
> - Add a test to ensure that it's safe to fall back to scanline decoding without
> rewinding
>
> BUG=skia:4211
>
> The new version was generally faster than the old version (but not significantly so).
>
> Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
>
> Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
>
> Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
>
> Committed: https://skia.googlesource.com/skia/+/30e78c9737ff4861dc4e3fa1e4cd010680ed6965
>
> Committed: https://skia.googlesource.com/skia/+/6fb2391b2cc83ee2160b4e994faa8128975acc1fTBR=reed@google.com,msarett@google.com,scroggo@chromium.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
BUG=skia:4211
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2044573002
Review-Url: https://codereview.chromium.org/2044573002
This is a step towards using SkCodec in Chromium, where progressive
decoding is necessary.
Switch from using png_read_row (which expects all the data to be
available) to png_process_data, which uses callbacks when rows are
available.
Create a new API for SkCodec, which supports progressive decoding and
scanline decoding. Future changes will switch the other clients off of
startScanlineDecode and get/skip-Scanlines to the new API.
Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
updateCurrScanline(), which was only used by the old implementation for
interlaced PNG.
DMSrcSink:
- In CodecSrc::kScanline_Mode, use the new method for scanline decoding
for the supported formats (just PNG and PNG-in-ICO for now).
fuzz.cpp:
- Remove reference to kNone_ScanlineOrder
SkCodec:
- Add new APIs:
- startIncrementalDecode
- incrementalDecode
- Remove kNone_SkScanlineOrder and updateCurrScanline()
SkPngCodec:
- Implement new APIs
- Switch from sk_read_fn/png_read_row etc to png_process_data
- Expand AutoCleanPng's role to decode the header and create the
SkPngCodec
- Make the interlaced PNG decoder report how many lines were
initialized during an incomplete decode
- Make initializeSwizzler return a bool instead of an SkCodec::Result
(It only returned kSuccess or kInvalidInput anyway)
SkIcoCodec:
- Implement the new APIs; supported for PNG in ICO
SkSampledCodec:
- Call the new method for decoding scanlines, and fall back to the old
method if the new version is unimplemented
- Remove references to kNone_SkScanlineOrder
tests/CodecPartial:
- Add a test which decodes part of an image, then finishes the decode,
and compares it to the straightforward method
tests/CodecTest:
- Add a test which decodes all scanlines using the new method
- Repurpose the Codec_stripes test to decode using the new method in
sections rather than all at once
- In the method check(), add a parameter for whether the image supports
the new method of scanline decoding, and be explicit about whether an
image supports incomplete
- Test incomplete PNG decodes. We should have been doing it anyway for
non-interlaced (except for an image that is too small - one row), but
the new method supports interlaced incomplete as well
- Make test_invalid_parameters test the new method
- Add a test to ensure that it's safe to fall back to scanline decoding without
rewinding
BUG=skia:4211
The new version was generally faster than the old version (but not significantly so).
Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
Committed: https://skia.googlesource.com/skia/+/30e78c9737ff4861dc4e3fa1e4cd010680ed6965
Review-Url: https://codereview.chromium.org/1997703003
Reason for revert:
Still breaking Google3 e.g.:
https://sponge.corp.google.com/target?id=9261d31b-34fc-4f0f-981e-f92f7c5cea2c&target=//third_party/skia/HEAD:dm#shard=1|run=1|attempt=1|page=-1
https://test.corp.google.com/ui#cl=123773095&flags=CAMQBQ==&id=OCL:123773095:BASE:123773415:1464804876959:b0ea9b1c&t=//third_party/skia/HEAD:dm
Original issue's description:
> Make SkPngCodec decode progressively.
>
> This is a step towards using SkCodec in Chromium, where progressive
> decoding is necessary.
>
> Switch from using png_read_row (which expects all the data to be
> available) to png_process_data, which uses callbacks when rows are
> available.
>
> Create a new API for SkCodec, which supports progressive decoding and
> scanline decoding. Future changes will switch the other clients off of
> startScanlineDecode and get/skip-Scanlines to the new API.
>
> Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
> PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
> updateCurrScanline(), which was only used by the old implementation for
> interlaced PNG.
>
> DMSrcSink:
> - In CodecSrc::kScanline_Mode, use the new method for scanline decoding
> for the supported formats (just PNG and PNG-in-ICO for now).
>
> fuzz.cpp:
> - Remove reference to kNone_ScanlineOrder
>
> SkCodec:
> - Add new APIs:
> - startIncrementalDecode
> - incrementalDecode
> - Remove kNone_SkScanlineOrder and updateCurrScanline()
>
> SkPngCodec:
> - Implement new APIs
> - Switch from sk_read_fn/png_read_row etc to png_process_data
> - Expand AutoCleanPng's role to decode the header and create the
> SkPngCodec
> - Make the interlaced PNG decoder report how many lines were
> initialized during an incomplete decode
> - Make initializeSwizzler return a bool instead of an SkCodec::Result
> (It only returned kSuccess or kInvalidInput anyway)
>
> SkIcoCodec:
> - Implement the new APIs; supported for PNG in ICO
>
> SkSampledCodec:
> - Call the new method for decoding scanlines, and fall back to the old
> method if the new version is unimplemented
> - Remove references to kNone_SkScanlineOrder
>
> tests/CodecPartial:
> - Add a test which decodes part of an image, then finishes the decode,
> and compares it to the straightforward method
>
> tests/CodecTest:
> - Add a test which decodes all scanlines using the new method
> - Repurpose the Codec_stripes test to decode using the new method in
> sections rather than all at once
> - In the method check(), add a parameter for whether the image supports
> the new method of scanline decoding, and be explicit about whether an
> image supports incomplete
> - Test incomplete PNG decodes. We should have been doing it anyway for
> non-interlaced (except for an image that is too small - one row), but
> the new method supports interlaced incomplete as well
> - Make test_invalid_parameters test the new method
> - Add a test to ensure that it's safe to fall back to scanline decoding without
> rewinding
>
> BUG=skia:4211
>
> The new version was generally faster than the old version (but not significantly so).
>
> Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
>
> Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
>
> Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
>
> Committed: https://skia.googlesource.com/skia/+/30e78c9737ff4861dc4e3fa1e4cd010680ed6965TBR=reed@google.com,msarett@google.com,scroggo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4211
Review-Url: https://codereview.chromium.org/2026383002
This is a step towards using SkCodec in Chromium, where progressive
decoding is necessary.
Switch from using png_read_row (which expects all the data to be
available) to png_process_data, which uses callbacks when rows are
available.
Create a new API for SkCodec, which supports progressive decoding and
scanline decoding. Future changes will switch the other clients off of
startScanlineDecode and get/skip-Scanlines to the new API.
Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
updateCurrScanline(), which was only used by the old implementation for
interlaced PNG.
DMSrcSink:
- In CodecSrc::kScanline_Mode, use the new method for scanline decoding
for the supported formats (just PNG and PNG-in-ICO for now).
fuzz.cpp:
- Remove reference to kNone_ScanlineOrder
SkCodec:
- Add new APIs:
- startIncrementalDecode
- incrementalDecode
- Remove kNone_SkScanlineOrder and updateCurrScanline()
SkPngCodec:
- Implement new APIs
- Switch from sk_read_fn/png_read_row etc to png_process_data
- Expand AutoCleanPng's role to decode the header and create the
SkPngCodec
- Make the interlaced PNG decoder report how many lines were
initialized during an incomplete decode
- Make initializeSwizzler return a bool instead of an SkCodec::Result
(It only returned kSuccess or kInvalidInput anyway)
SkIcoCodec:
- Implement the new APIs; supported for PNG in ICO
SkSampledCodec:
- Call the new method for decoding scanlines, and fall back to the old
method if the new version is unimplemented
- Remove references to kNone_SkScanlineOrder
tests/CodecPartial:
- Add a test which decodes part of an image, then finishes the decode,
and compares it to the straightforward method
tests/CodecTest:
- Add a test which decodes all scanlines using the new method
- Repurpose the Codec_stripes test to decode using the new method in
sections rather than all at once
- In the method check(), add a parameter for whether the image supports
the new method of scanline decoding, and be explicit about whether an
image supports incomplete
- Test incomplete PNG decodes. We should have been doing it anyway for
non-interlaced (except for an image that is too small - one row), but
the new method supports interlaced incomplete as well
- Make test_invalid_parameters test the new method
- Add a test to ensure that it's safe to fall back to scanline decoding without
rewinding
BUG=skia:4211
The new version was generally faster than the old version (but not significantly so).
Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
Review-Url: https://codereview.chromium.org/1997703003
Reason for revert:
This is failing tests and then crashing on Google3 [1]. The crashes are fixed by crrev.com/2026873002, but to fix the builder we'll need to upgrade its version of libpng.
[1] https://sponge.corp.google.com/target?id=e545ef55-4da4-4931-9524-1ac92acb61b1&target=//third_party/skia/HEAD:dm#shard=1|run=1|attempt=1|page=-1
Original issue's description:
> Make SkPngCodec decode progressively.
>
> This is a step towards using SkCodec in Chromium, where progressive
> decoding is necessary.
>
> Switch from using png_read_row (which expects all the data to be
> available) to png_process_data, which uses callbacks when rows are
> available.
>
> Create a new API for SkCodec, which supports progressive decoding and
> scanline decoding. Future changes will switch the other clients off of
> startScanlineDecode and get/skip-Scanlines to the new API.
>
> Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
> PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
> updateCurrScanline(), which was only used by the old implementation for
> interlaced PNG.
>
> DMSrcSink:
> - In CodecSrc::kScanline_Mode, use the new method for scanline decoding
> for the supported formats (just PNG and PNG-in-ICO for now).
>
> fuzz.cpp:
> - Remove reference to kNone_ScanlineOrder
>
> SkCodec:
> - Add new APIs:
> - startIncrementalDecode
> - incrementalDecode
> - Remove kNone_SkScanlineOrder and updateCurrScanline()
>
> SkPngCodec:
> - Implement new APIs
> - Switch from sk_read_fn/png_read_row etc to png_process_data
> - Expand AutoCleanPng's role to decode the header and create the
> SkPngCodec
> - Make the interlaced PNG decoder report how many lines were
> initialized during an incomplete decode
> - Make initializeSwizzler return a bool instead of an SkCodec::Result
> (It only returned kSuccess or kInvalidInput anyway)
>
> SkIcoCodec:
> - Implement the new APIs; supported for PNG in ICO
>
> SkSampledCodec:
> - Call the new method for decoding scanlines, and fall back to the old
> method if the new version is unimplemented
> - Remove references to kNone_SkScanlineOrder
>
> tests/CodecPartial:
> - Add a test which decodes part of an image, then finishes the decode,
> and compares it to the straightforward method
>
> tests/CodecTest:
> - Add a test which decodes all scanlines using the new method
> - Repurpose the Codec_stripes test to decode using the new method in
> sections rather than all at once
> - In the method check(), add a parameter for whether the image supports
> the new method of scanline decoding, and be explicit about whether an
> image supports incomplete
> - Test incomplete PNG decodes. We should have been doing it anyway for
> non-interlaced (except for an image that is too small - one row), but
> the new method supports interlaced incomplete as well
> - Make test_invalid_parameters test the new method
> - Add a test to ensure that it's safe to fall back to scanline decoding without
> rewinding
>
> BUG=skia:4211
>
> The new version was generally faster than the old version (but not significantly so).
>
> Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
>
> Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
>
> Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539eTBR=reed@google.com,msarett@google.com,scroggo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4211
Review-Url: https://codereview.chromium.org/2023103002
This is a step towards using SkCodec in Chromium, where progressive
decoding is necessary.
Switch from using png_read_row (which expects all the data to be
available) to png_process_data, which uses callbacks when rows are
available.
Create a new API for SkCodec, which supports progressive decoding and
scanline decoding. Future changes will switch the other clients off of
startScanlineDecode and get/skip-Scanlines to the new API.
Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
updateCurrScanline(), which was only used by the old implementation for
interlaced PNG.
DMSrcSink:
- In CodecSrc::kScanline_Mode, use the new method for scanline decoding
for the supported formats (just PNG and PNG-in-ICO for now).
fuzz.cpp:
- Remove reference to kNone_ScanlineOrder
SkCodec:
- Add new APIs:
- startIncrementalDecode
- incrementalDecode
- Remove kNone_SkScanlineOrder and updateCurrScanline()
SkPngCodec:
- Implement new APIs
- Switch from sk_read_fn/png_read_row etc to png_process_data
- Expand AutoCleanPng's role to decode the header and create the
SkPngCodec
- Make the interlaced PNG decoder report how many lines were
initialized during an incomplete decode
- Make initializeSwizzler return a bool instead of an SkCodec::Result
(It only returned kSuccess or kInvalidInput anyway)
SkIcoCodec:
- Implement the new APIs; supported for PNG in ICO
SkSampledCodec:
- Call the new method for decoding scanlines, and fall back to the old
method if the new version is unimplemented
- Remove references to kNone_SkScanlineOrder
tests/CodecPartial:
- Add a test which decodes part of an image, then finishes the decode,
and compares it to the straightforward method
tests/CodecTest:
- Add a test which decodes all scanlines using the new method
- Repurpose the Codec_stripes test to decode using the new method in
sections rather than all at once
- In the method check(), add a parameter for whether the image supports
the new method of scanline decoding, and be explicit about whether an
image supports incomplete
- Test incomplete PNG decodes. We should have been doing it anyway for
non-interlaced (except for an image that is too small - one row), but
the new method supports interlaced incomplete as well
- Make test_invalid_parameters test the new method
- Add a test to ensure that it's safe to fall back to scanline decoding without
rewinding
BUG=skia:4211
The new version was generally faster than the old version (but not significantly so).
Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
Review-Url: https://codereview.chromium.org/1997703003
This will allow me to test and visualize some assumptions
on parsing and applying color profiles. Also, it should
help me find and fix bugs.
This is certainly not an optimized implementation, and, as
far as I know, it doesn't take any shortcuts to improve
performance. We'll probably want to do both of these
once we know where it fits in the pipeline.
Right now this test is only run on an arbitrary set of ~100
images from the top 10k skps. I'll continue to add more
"interesting" images and probably tweak the code as
necessary.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1995233003
Review-Url: https://codereview.chromium.org/1995233003
When decoding to 565 or Gray, allow the client to incorrectly ask for premul.
When checking whether it's possible to decode to 565, return whether the
source is opaque.
In DM, allow decoding to 565 or Gray, even if the client also asked for premul.
This fixes a bug introduced in crrev.com/1999593003 when we stopped ever
requesting Opaque, resulting in us not testing 565 or Gray.
BUG=skia:4616
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=1996993003
Review-Url: https://codereview.chromium.org/1996993003
I was using SkRect::MakeLargest() as bounds, which is sort of nutso,
as that clearly is way out of bounds for how big a picture can feasibly
be, i.e. something closer to SkIRect::MakeLargest().
This was causing spurious quick rejects in drawPatch(). I didn't really
look much deeper to figure out why. It's easy enough to just feed it the
proper bounds of the entire content.
This means patch_primitive draws correctly in sp-8888 mode.
I also noticed the GM was too small... it clipped off most of its content.
So I've made it larger.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1865143002
Review URL: https://codereview.chromium.org/1865143002
The C++ standard library uses the name "release" for the operation we call "detach".
Rewriting each "detach(" to "release(" brings us a step closer to using standard library types directly (e.g. std::unique_ptr instead of SkAutoTDelete).
This was a fairly blind transformation. There may have been unintentional conversions in here, but it's probably for the best to have everything uniformly say "release".
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1809733002
Review URL: https://codereview.chromium.org/1809733002
Reason for revert:
GM breakage. Changes to SkGr.cpp appear to be altering behavior on a variety of tests. Debugging...
Original issue's description:
> Progress on gamma-correctness in the GPU backend. Fixed conversion of color and profile type to pixel config, which makes many things "just work".
>
> Added (color=8888|f16|srgb) option to gpu configurations, along with gpuf16, gpusrgb, and anglesrgb predefined configs. Runs the gpu backend in gamma-correct mode (with either FP16 linear or sRGB 8888 frambuffers).
>
> BUG=skia:
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1750383002
>
> Committed: https://skia.googlesource.com/skia/+/a6f58194733c1c50e4fe5f98585e42344f29b6f0TBR=mtklein@google.com,bsalomon@google.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:
Review URL: https://codereview.chromium.org/1755553003
Reason for revert:
Breaks Ubuntu and Mac CMAKE
Original issue's description:
> Make SkPicture/SkImageGenerator default to SkCodec
>
> Remove reference to SkImageDecoder from SkPicture. Make the default
> InstallPixelRefProc passed to CreateFromStream use
> SkImageGenerator::NewFromEncoded instead.
>
> Make SkImageGenerator::NewFromEncoded create an SkCodecImageGenerator.
> Remove the old version that used SkImageDecoder.
>
> Remove all versions of lazy_decode_bitmap/LazyDecodeBitmap. The default
> now behaves lazily.
>
> Update all clients to use the default.
>
> Move SkImageDecoderGenerator into KtxTest.cpp, and use it directly.
>
> BUG=skia:4691
> BUG=skia:4290
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1671193002
>
> Committed: https://skia.googlesource.com/skia/+/026388a01864c74208ad57d1ba4f711602d101c6TBR=msarett@google.com,reed@google.com,scroggo@google.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4691
Review URL: https://codereview.chromium.org/1685963004
Remove reference to SkImageDecoder from SkPicture. Make the default
InstallPixelRefProc passed to CreateFromStream use
SkImageGenerator::NewFromEncoded instead.
Make SkImageGenerator::NewFromEncoded create an SkCodecImageGenerator.
Remove the old version that used SkImageDecoder.
Remove all versions of lazy_decode_bitmap/LazyDecodeBitmap. The default
now behaves lazily.
Update all clients to use the default.
Move SkImageDecoderGenerator into KtxTest.cpp, and use it directly.
BUG=skia:4691
BUG=skia:4290
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1671193002
Review URL: https://codereview.chromium.org/1671193002
RAW images use a lot of memory. Add a new FLAG to run one at a time so
we have less risk of running out of memory.
Isolate RAW images to their own thread on particular devices where our
images cause OOM errors.
Locally, this drops the max memory use from 3945 MB to 1664 MB (running only --image --images <RAW images we test>)
BUG=skia:4912
BUG=skia:4878
BUG=b/27035849
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1681553003
Review URL: https://codereview.chromium.org/1681553003
If a client requests unpremul or premul from an opaque SkCodec,
support it. The opaque image can be treated as any of them, though
it will be less efficient to draw than if the client had used
opaque.
Change the filling code (i.e. for incomplete images) to base its color on
the source alpha type. Prior to adding the support to decode opaque to
any, it was fine to use either source or dest (which would have yielded
the same result). If the client requests non-opaque, we do not want this
to switch the fill value from black to transparent. This also allows
simplifying the signatures for getFillValue and onGetFillValue.
In CodexTest, expect the same result when decoding opaque to *premul,
and compare to the opaque version.
BUG=skia:4616
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1641273003
Review URL: https://codereview.chromium.org/1641273003
- add ViaPicture
- run ViaPicture on most bots
- run ViaSecondPicture (tests SkPictureRecorder reuse) and ViaTwice (tests caching) on some bots
- extend ViaSerialization reference checking to ViaPicture, ViaSecondPicture,
ViaSingletonPictures, and ViaTwice
- suppress current reference check failures with --blacklist
I'm open to following up on changing how those suppressions work.
Passing --nocheck turns off these invariant checks, letting us debug failures with normal image diff tools.
CQ_EXTRA_TRYBOTS=client.skia:Test-Win8-MSVC-ShuttleB-CPU-AVX2-x86_64-Release-Trybot
BUG=skia:4769
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1569823006
Review URL: https://codereview.chromium.org/1569823006
Add extended config specification form that can be used to run different
gpu backend with different APIs.
The configs can be specified with the form:
gpu(api=string,dit=bool,nvpr=bool,samples=int)
This replaces and removes the --gpuAPI flag.
All existing configs should still work.
Adds following documentation:
out/Debug/dm --help config
Flags:
--config: type: string default: 565 8888 gpu nonrendering
Options: 565 8888 debug gpu gpudebug gpudft gpunull msaa16 msaa4
nonrendering null nullgpu nvprmsaa16 nvprmsaa4 pdf pdf_poppler skp svg
xps or use extended form 'backend(option=value,...)'.
Extended form: 'backend(option=value,...)'
Possible backends and options:
gpu(api=string,dit=bool,nvpr=bool,samples=int) GPU backend
api type: string default: native.
Select graphics API to use with gpu backend.
Options:
native Use platform default OpenGL or OpenGL ES backend.
gl Use OpenGL.
gles Use OpenGL ES.
debug Use debug OpenGL.
null Use null OpenGL.
dit type: bool default: false.
Use device independent text.
nvpr type: bool default: false.
Use NV_path_rendering OpenGL and OpenGL ES extension.
samples type: int default: 0.
Use multisampling with N samples.
Predefined configs:
gpu = gpu()
msaa4 = gpu(samples=4)
msaa16 = gpu(samples=16)
nvprmsaa4 = gpu(nvpr=true,samples=4)
nvprmsaa16 = gpu(nvpr=true,samples=16)
gpudft = gpu(dit=true)
gpudebug = gpu(api=debug)
gpunull = gpu(api=null)
debug = gpu(api=debug)
nullgpu = gpu(api=null)
BUG=skia:2992
Committed: https://skia.googlesource.com/skia/+/e13ca329fca4c28cf4e078561f591ab27b743d23
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1490113005
Committed: https://skia.googlesource.com/skia/+/c8b4336444e7b90382e04e33665fb3b8490b825b
Committed: https://skia.googlesource.com/skia/+/9ebc3f0ee6db215dde461dc4777d85988cf272dd
Review URL: https://codereview.chromium.org/1490113005
Add extended config specification form that can be used to run different
gpu backend with different APIs.
The configs can be specified with the form:
gpu(api=string,dit=bool,nvpr=bool,samples=int)
This replaces and removes the --gpuAPI flag.
All existing configs should still work.
Adds following documentation:
out/Debug/dm --help config
Flags:
--config: type: string default: 565 8888 gpu nonrendering
Options: 565 8888 debug gpu gpudebug gpudft gpunull msaa16 msaa4
nonrendering null nullgpu nvprmsaa16 nvprmsaa4 pdf pdf_poppler skp svg
xps or use extended form 'backend(option=value,...)'.
Extended form: 'backend(option=value,...)'
Possible backends and options:
gpu(api=string,dit=bool,nvpr=bool,samples=int) GPU backend
api type: string default: native.
Select graphics API to use with gpu backend.
Options:
native Use platform default OpenGL or OpenGL ES backend.
gl Use OpenGL.
gles Use OpenGL ES.
debug Use debug OpenGL.
null Use null OpenGL.
dit type: bool default: false.
Use device independent text.
nvpr type: bool default: false.
Use NV_path_rendering OpenGL and OpenGL ES extension.
samples type: int default: 0.
Use multisampling with N samples.
Predefined configs:
gpu = gpu()
msaa4 = gpu(samples=4)
msaa16 = gpu(samples=16)
nvprmsaa4 = gpu(nvpr=true,samples=4)
nvprmsaa16 = gpu(nvpr=true,samples=16)
gpudft = gpu(dit=true)
gpudebug = gpu(api=debug)
gpunull = gpu(api=null)
debug = gpu(api=debug)
nullgpu = gpu(api=null)
BUG=skia:2992
Committed: https://skia.googlesource.com/skia/+/e13ca329fca4c28cf4e078561f591ab27b743d23
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1490113005
Committed: https://skia.googlesource.com/skia/+/c8b4336444e7b90382e04e33665fb3b8490b825b
Review URL: https://codereview.chromium.org/1490113005
Reason for revert:
This CL changed 1200 images on gold, when I wouldn't expect any diffs from the description.
Original issue's description:
> Add config options to run different GPU APIs to dm and nanobench
>
> Add extended config specification form that can be used to run different
> gpu backend with different APIs.
>
> The configs can be specified with the form:
> gpu(api=string,dit=bool,nvpr=bool,samples=int)
>
> This replaces and removes the --gpuAPI flag.
>
> All existing configs should still work.
>
> Adds following documentation:
>
> out/Debug/dm --help config
>
> Flags:
> --config: type: string default: 565 8888 gpu nonrendering
> Options: 565 8888 debug gpu gpudebug gpudft gpunull msaa16 msaa4
> nonrendering null nullgpu nvprmsaa16 nvprmsaa4 pdf pdf_poppler skp svg
> xps or use extended form 'backend(option=value,...)'.
>
> Extended form: 'backend(option=value,...)'
>
> Possible backends and options:
>
> gpu(api=string,dit=bool,nvpr=bool,samples=int) GPU backend
> api type: string default: native.
> Select graphics API to use with gpu backend.
> Options:
> native Use platform default OpenGL or OpenGL ES backend.
> gl Use OpenGL.
> gles Use OpenGL ES.
> debug Use debug OpenGL.
> null Use null OpenGL.
> dit type: bool default: false.
> Use device independent text.
> nvpr type: bool default: false.
> Use NV_path_rendering OpenGL and OpenGL ES extension.
> samples type: int default: 0.
> Use multisampling with N samples.
>
> Predefined configs:
>
> gpu = gpu()
> msaa4 = gpu(samples=4)
> msaa16 = gpu(samples=16)
> nvprmsaa4 = gpu(nvpr=true,samples=4)
> nvprmsaa16 = gpu(nvpr=true,samples=16)
> gpudft = gpu(dit=true)
> gpudebug = gpu(api=debug)
> gpunull = gpu(api=null)
> debug = gpu(api=debug)
> nullgpu = gpu(api=null)
>
> BUG=skia:2992
>
> Committed: https://skia.googlesource.com/skia/+/e13ca329fca4c28cf4e078561f591ab27b743d23
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1490113005
>
> Committed: https://skia.googlesource.com/skia/+/c8b4336444e7b90382e04e33665fb3b8490b825bTBR=mtklein@google.com,bsalomon@google.com,scroggo@google.com,kkinnunen@nvidia.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:2992
Review URL: https://codereview.chromium.org/1536963002
Add extended config specification form that can be used to run different
gpu backend with different APIs.
The configs can be specified with the form:
gpu(api=string,dit=bool,nvpr=bool,samples=int)
This replaces and removes the --gpuAPI flag.
All existing configs should still work.
Adds following documentation:
out/Debug/dm --help config
Flags:
--config: type: string default: 565 8888 gpu nonrendering
Options: 565 8888 debug gpu gpudebug gpudft gpunull msaa16 msaa4
nonrendering null nullgpu nvprmsaa16 nvprmsaa4 pdf pdf_poppler skp svg
xps or use extended form 'backend(option=value,...)'.
Extended form: 'backend(option=value,...)'
Possible backends and options:
gpu(api=string,dit=bool,nvpr=bool,samples=int) GPU backend
api type: string default: native.
Select graphics API to use with gpu backend.
Options:
native Use platform default OpenGL or OpenGL ES backend.
gl Use OpenGL.
gles Use OpenGL ES.
debug Use debug OpenGL.
null Use null OpenGL.
dit type: bool default: false.
Use device independent text.
nvpr type: bool default: false.
Use NV_path_rendering OpenGL and OpenGL ES extension.
samples type: int default: 0.
Use multisampling with N samples.
Predefined configs:
gpu = gpu()
msaa4 = gpu(samples=4)
msaa16 = gpu(samples=16)
nvprmsaa4 = gpu(nvpr=true,samples=4)
nvprmsaa16 = gpu(nvpr=true,samples=16)
gpudft = gpu(dit=true)
gpudebug = gpu(api=debug)
gpunull = gpu(api=null)
debug = gpu(api=debug)
nullgpu = gpu(api=null)
BUG=skia:2992
Committed: https://skia.googlesource.com/skia/+/e13ca329fca4c28cf4e078561f591ab27b743d23
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1490113005
Review URL: https://codereview.chromium.org/1490113005
Reason for revert:
speculative revert to see if it unblocks the DEPS roll
https://codereview.chromium.org/1529443002
Original issue's description:
> Add config options to run different GPU APIs to dm and nanobench
>
> Add extended config specification form that can be used to run different
> gpu backend with different APIs.
>
> The configs can be specified with the form:
> gpu(api=string,dit=bool,nvpr=bool,samples=int)
>
> This replaces and removes the --gpuAPI flag.
>
> All existing configs should still work.
>
> Adds following documentation:
>
> out/Debug/dm --help config
>
> Flags:
> --config: type: string default: 565 8888 gpu nonrendering
> Options: 565 8888 debug gpu gpudebug gpudft gpunull msaa16 msaa4
> nonrendering null nullgpu nvprmsaa16 nvprmsaa4 pdf pdf_poppler skp svg
> xps or use extended form 'backend(option=value,...)'.
>
> Extended form: 'backend(option=value,...)'
>
> Possible backends and options:
>
> gpu(api=string,dit=bool,nvpr=bool,samples=int) GPU backend
> api type: string default: native.
> Select graphics API to use with gpu backend.
> Options:
> native Use platform default OpenGL or OpenGL ES backend.
> gl Use OpenGL.
> gles Use OpenGL ES.
> debug Use debug OpenGL.
> null Use null OpenGL.
> dit type: bool default: false.
> Use device independent text.
> nvpr type: bool default: false.
> Use NV_path_rendering OpenGL and OpenGL ES extension.
> samples type: int default: 0.
> Use multisampling with N samples.
>
> Predefined configs:
>
> gpu = gpu()
> msaa4 = gpu(samples=4)
> msaa16 = gpu(samples=16)
> nvprmsaa4 = gpu(nvpr=true,samples=4)
> nvprmsaa16 = gpu(nvpr=true,samples=16)
> gpudft = gpu(dit=true)
> gpudebug = gpu(api=debug)
> gpunull = gpu(api=null)
> debug = gpu(api=debug)
> nullgpu = gpu(api=null)
>
> BUG=skia:2992
>
> Committed: https://skia.googlesource.com/skia/+/e13ca329fca4c28cf4e078561f591ab27b743d23TBR=bsalomon@google.com,scroggo@google.com,joshualitt@google.com,kkinnunen@nvidia.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:2992
Review URL: https://codereview.chromium.org/1528473002
Add extended config specification form that can be used to run different
gpu backend with different APIs.
The configs can be specified with the form:
gpu(api=string,dit=bool,nvpr=bool,samples=int)
This replaces and removes the --gpuAPI flag.
All existing configs should still work.
Adds following documentation:
out/Debug/dm --help config
Flags:
--config: type: string default: 565 8888 gpu nonrendering
Options: 565 8888 debug gpu gpudebug gpudft gpunull msaa16 msaa4
nonrendering null nullgpu nvprmsaa16 nvprmsaa4 pdf pdf_poppler skp svg
xps or use extended form 'backend(option=value,...)'.
Extended form: 'backend(option=value,...)'
Possible backends and options:
gpu(api=string,dit=bool,nvpr=bool,samples=int) GPU backend
api type: string default: native.
Select graphics API to use with gpu backend.
Options:
native Use platform default OpenGL or OpenGL ES backend.
gl Use OpenGL.
gles Use OpenGL ES.
debug Use debug OpenGL.
null Use null OpenGL.
dit type: bool default: false.
Use device independent text.
nvpr type: bool default: false.
Use NV_path_rendering OpenGL and OpenGL ES extension.
samples type: int default: 0.
Use multisampling with N samples.
Predefined configs:
gpu = gpu()
msaa4 = gpu(samples=4)
msaa16 = gpu(samples=16)
nvprmsaa4 = gpu(nvpr=true,samples=4)
nvprmsaa16 = gpu(nvpr=true,samples=16)
gpudft = gpu(dit=true)
gpudebug = gpu(api=debug)
gpunull = gpu(api=null)
debug = gpu(api=debug)
nullgpu = gpu(api=null)
BUG=skia:2992
Review URL: https://codereview.chromium.org/1490113005
This should fix some odd formatting problems in the logs, e.g.
Note tally:
583x (skipped: Cannot convert to requested color type.
)
4x (--blacklist _ image decode 4bpp-pixeldata-cropped.bmp)
~~~>
Note tally:
583x (skipped: Cannot convert to requested color type.)
4x (--blacklist _ image decode 4bpp-pixeldata-cropped.bmp)
BUG=skia:
Review URL: https://codereview.chromium.org/1508223006
Reason for revert:
BUG=skia:4609
skbug.com/4609
Seems like GrContextFactory needs to fail when the NVPR option is requested but the driver version isn't sufficiently high.
Original issue's description:
> Make NVPR a GL context option instead of a GL context
>
> Make NVPR a GL context option instead of a GL context.
> This may enable NVPR to be run with command buffer
> interface.
>
> No functionality change in DM or nanobench. NVPR can
> only be run with normal GL APIs.
>
> BUG=skia:2992
>
> Committed: https://skia.googlesource.com/skia/+/eeebdb538d476c1bfc8b63a946094ca1b505ecd1TBR=mtklein@google.com,jvanverth@google.com,kkinnunen@nvidia.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:2992
Review URL: https://codereview.chromium.org/1486153002
Make NVPR a GL context option instead of a GL context.
This may enable NVPR to be run with command buffer
interface.
No functionality change in DM or nanobench. NVPR can
only be run with normal GL APIs.
BUG=skia:2992
Review URL: https://codereview.chromium.org/1448883002
Rename SkCodecTools.h to SkBitmapRegionDecoderPriv.h
Move BRD code to its own directory in tools. This
allows us to not need to expose the entire tools
directory in Android.
BUG=skia:
Review URL: https://codereview.chromium.org/1417393004
We no longer need to worry about namespace
conflicts SkBitmapRegionDecoder in Android (which
we are replacing).
Additionally, the static Create() function does not
need to repeat the name BitmapRegionDecoder.
BUG=skia:
Review URL: https://codereview.chromium.org/1415243007
Remove double negative.
Also, change another error message to be slightly (meaningfully)
different so I can find the right one based on the log.
Review URL: https://codereview.chromium.org/1424083004
This involves disabling webps for kCanvas_Strategy.
We have not yet implemented webp subset decodes for this
strategy.
BUG=skia:4521
Review URL: https://codereview.chromium.org/1405273004
The result SkBitmap, the pixel allocator, and the alpha
preference need to be communicated from the client to
the region decoder.
BUG=skia:
Review URL: https://codereview.chromium.org/1418093006
Turns out bitmap.eraseColor() does nothing if the bitmap
is kIndex8. We need a more reliable way to initialize
all of the pixels that we look at in Gold.
The input SkCanvas* is always zero initialized, so let's
only draw pixels to the canvas if we have initialized them.
BUG=skia:
Review URL: https://codereview.chromium.org/1418913002
We will implement this API using SkCodecs.
SkAndroidCodecs will be used to implement the
BitmapRegionDecoder Java API (and possibly
BitmapFactory).
BUG=skia:
Review URL: https://codereview.chromium.org/1406223002
This CL allows the SkScanlineDecoder to decode partial
scanlines.
This is a first step in efficiently implementing subsetting
in SkScaledCodec.
BUG=skia:4209
Review URL: https://codereview.chromium.org/1390213002
Use SkCodecPrintf instead of SkDebugf.
Check if the conversion is possible rather than starting many decodes
that will certainly fail.
Small refactor to code that deals with subsets that fall outside
of the image.
BUG=skia:
Review URL: https://codereview.chromium.org/1395383002
Rather than implementing some sort of "fill" in every
SkCodec subclass for incomplete images, let's make the
parent class handle this situation.
This includes an API change to SkCodec.h
SkCodec::getScanlines() now returns the number of lines it
read successfully, rather than an SkCodec::Result enum.
getScanlines() most often fails on an incomplete input, in
which case it is useful to know how many lines were
successfully decoded - this provides more information than
kIncomplete vs kSuccess. We do lose information when the
API is used improperly, as we are no longer able to return
kInvalidParameter or kScanlineNotStarted.
Known Issues:
Does not work for incomplete fFrameIsSubset gifs.
Does not work for incomplete icos.
BUG=skia:
Review URL: https://codereview.chromium.org/1332053002
Looking in Gold, I see some ICO images that only show the upper left
corner of the originals. It is happening because we use different ways
of deciding what the dimensions are:
In CodecSrc::size(), we use an SkScaledCodec to get the dimensions,
even when fMode is not kScaledCodec_Mode.
In CodecSrc::draw(), we only use SkScaledCodec in kScaledCodec_Mode.
My recent CL to combine SkScanlineDecoder with SkCodec revealed this
bug, because now SkScaledCodec::NewFromStream will succeed on ICO.
(Previously, it failed because we do not yet have a scanline decoder
for ICO (skbug.com/4404). Now that they are combined, we would need
to specially flag ICO to stop returning an SkScaledCodec.)
Switch size() to use the correct type of codec.
Review URL: https://codereview.chromium.org/1373253004
Benefits:
- This mimics other decoding APIs (including the ones SkCodec relies
on, e.g. a png_struct, which can be used to decode an entire image or
one line at a time).
- It allows a client to ask us to do what we can do efficiently - i.e.
start from encoded data and either decode the whole thing or scanlines.
- It removes the duplicate methods which appeared in both SkCodec and
SkScanlineDecoder (some of which, e.g. in SkJpegScanlineDecoder, just
call fCodec->sameMethod()).
- It simplifies moving more checks into the base class (e.g. the
examples in skbug.com/4284).
BUG=skia:4175
BUG=skia:4284
=====================================================================
SkScanlineDecoder.h/.cpp:
Removed.
SkCodec.h/.cpp:
Add methods, enums, and variables which were previously in
SkScanlineDecoder.
Default fCurrScanline to -1, as a sentinel that start has not been
called.
General changes:
Convert SkScanlineDecoders to SkCodecs.
General changes in SkCodec subclasses:
Merge SkScanlineDecoder implementation into SkCodec. Most (all?) owned
an SkCodec, so they now call this-> instead of fCodec->.
SkBmpCodec.h/.cpp:
Replace the unused rowOrder method with an override for
onGetScanlineOrder.
Make getDstRow const, since it is called by onGetY, which is const.
SkCodec_libpng.h/.cpp:
Make SkPngCodec an abstract class, with two subclasses which handle
scanline decoding separately (they share code for decoding the entire
image). Reimplement onReallyHasAlpha so that it can return the most
recent result (e.g. after a scanline decode which only decoded part
of the image) or a better answer (e.g. if the whole image is known to
be opaque).
Compute fNumberPasses early, so we know which subclass to instantiate.
Make SkPngInterlaceScanlineDecoder use the base class' fCurrScanline
rather than a separate variable.
CodexTest.cpp:
Add tests for the state changes in SkCodec (need to call start before
decoding scanlines; calling getPixels means that start will need to
be called again before decoding more scanlines).
Add a test which decodes in stripes, currently only used for an
interlaced PNG.
TODO: Add tests for onReallyHasAlpha.
Review URL: https://codereview.chromium.org/1365313002
