If the CL does not contain a "CQ_EXTRA_TRYBOTS=" section then it constructs one from the paths modified in your CL.
If you already have an existing "CQ_EXTRA_TRYBOTS=" section in your CL then it parses it, preserves your options, and only adds the builders and masters that were missing.
Also ensures no trybots are repeated (i.e. each master trybot combination only shows up once).
And I killed the hashtags feature in this CL, nobody was using it.
BUG=skia:4364
Review URL: https://codereview.chromium.org/1383743002
We can not call android::uirenderer::DisplayListCanvas::reset()
after the object has been constructed (due to an assert), so remove
that call. Add two missing overrides to SkAndroidSDKCanvas:
onDrawAtlas() and onDrawImageNine().
BUG=skia:4216
R=djsollen@google.com
patch from issue 1377533003 at patchset 20001 (http://crrev.com/1377533003#ps20001)
Review URL: https://codereview.chromium.org/1369923003
drawImage calls now properly embeds the original jpeg.
NOTE: drawBitmap*() calls no longer embed JPEG files when
possible (this is in advance of eliminating bitmaps backed
by encoded data). Chromium has already moved from
drawBitmap to drawImage.
Comparisons:
control:
total PDF drawImage/drawBitmap calls: 8010
total PDF jpeg images: 0
total PDF regular images: 3581
experiament:
total PDF drawImage/drawBitmap calls: 8014
total PDF jpeg images: 271
total PDF regular images: 3311
total PDF regular images: 3582 (271 + 3311)
When comparing rendered output there were perceptual
differences in the following four GMs: colorcube, emboss,
colormatrix, and tablecolorfilter. All of these differences
were improvements (that is, closer to the 8888 rendering)
due fixing a bug with colorfilters and forgetting to call
notifyPixelsChanged.
No SKPs had perceptual differences.
Total PDF size dropped from 133964 kB to 126276 kB, a 5.7%
improvement (mostly due to restoring use of JPG images in
SKPs).
BUG=skia:4370
Review URL: https://codereview.chromium.org/1372783003
This change enables multisampled clipping for mixed sampled
render targets. Previously clipping in mixed samples config
behaved the same as in the gpu config.
In order to retrofit non-MSAA draw methods, programmable sample
locations are used in order to colocate all samples at (0.5, 0.5).
Requires support for NV_sample_locations.
BUG=skia:4399
Review URL: https://codereview.chromium.org/1232103002
GLBenches do not expect gl state to change between onPerCanvasPreDraw and *PostDraw, but we do a clear and sometimes we clear as draw. This causes us to bind vertex objects / programs / etc.
This change creates two new virtual methods which are called right before and immediately after timing.
BUG=skia:
Review URL: https://codereview.chromium.org/1379853003
Looking in Gold, I see some ICO images that only show the upper left
corner of the originals. It is happening because we use different ways
of deciding what the dimensions are:
In CodecSrc::size(), we use an SkScaledCodec to get the dimensions,
even when fMode is not kScaledCodec_Mode.
In CodecSrc::draw(), we only use SkScaledCodec in kScaledCodec_Mode.
My recent CL to combine SkScanlineDecoder with SkCodec revealed this
bug, because now SkScaledCodec::NewFromStream will succeed on ICO.
(Previously, it failed because we do not yet have a scanline decoder
for ICO (skbug.com/4404). Now that they are combined, we would need
to specially flag ICO to stop returning an SkScaledCodec.)
Switch size() to use the correct type of codec.
Review URL: https://codereview.chromium.org/1373253004
Except for some small edits, this is mainly:
patch from issue 1353953004 at patchset 80001 (http://crrev.com/1353953004#ps80001)
CMake configuration file for compiling Windows x64 VS2013 with CMake.
Things to be fixed:
- only x64 is supported
- I didn't try SKIA_GDI (experimental) and directly went for the DirectWrite - this should need an option in the CMake configuration
- make sure yasm and custom build rules paths are set correctly - if the hierarchy changes CMake will just blow things up
- compilation works but there are LOTS and LOTS of warnings (over 9000), if this is okay nevermind but since most of them are related to deprecated functions either consider fixing or suppressing them
- Release mode is untested - I suppose it won't be a big deal but might need some fixing
More info here: https://groups.google.com/forum/#!topic/skia-discuss/HLu-Hesfbg4
BUG=skia:4269
CQ_EXTRA_TRYBOTS=client.skia.compile:Build-Mac10.9-Clang-x86_64-Release-CMake-Trybot,Build-Ubuntu-GCC-x86_64-Release-CMake-Trybot
Review URL: https://codereview.chromium.org/1370263004
Rather than calling it in each subclass, call it once in the base
class. Call it first, since other steps may modify internal structures
which would be replaced by a call to onRewind.
BUG=skia:4284
Review URL: https://codereview.chromium.org/1381483002
Benefits:
- This mimics other decoding APIs (including the ones SkCodec relies
on, e.g. a png_struct, which can be used to decode an entire image or
one line at a time).
- It allows a client to ask us to do what we can do efficiently - i.e.
start from encoded data and either decode the whole thing or scanlines.
- It removes the duplicate methods which appeared in both SkCodec and
SkScanlineDecoder (some of which, e.g. in SkJpegScanlineDecoder, just
call fCodec->sameMethod()).
- It simplifies moving more checks into the base class (e.g. the
examples in skbug.com/4284).
BUG=skia:4175
BUG=skia:4284
=====================================================================
SkScanlineDecoder.h/.cpp:
Removed.
SkCodec.h/.cpp:
Add methods, enums, and variables which were previously in
SkScanlineDecoder.
Default fCurrScanline to -1, as a sentinel that start has not been
called.
General changes:
Convert SkScanlineDecoders to SkCodecs.
General changes in SkCodec subclasses:
Merge SkScanlineDecoder implementation into SkCodec. Most (all?) owned
an SkCodec, so they now call this-> instead of fCodec->.
SkBmpCodec.h/.cpp:
Replace the unused rowOrder method with an override for
onGetScanlineOrder.
Make getDstRow const, since it is called by onGetY, which is const.
SkCodec_libpng.h/.cpp:
Make SkPngCodec an abstract class, with two subclasses which handle
scanline decoding separately (they share code for decoding the entire
image). Reimplement onReallyHasAlpha so that it can return the most
recent result (e.g. after a scanline decode which only decoded part
of the image) or a better answer (e.g. if the whole image is known to
be opaque).
Compute fNumberPasses early, so we know which subclass to instantiate.
Make SkPngInterlaceScanlineDecoder use the base class' fCurrScanline
rather than a separate variable.
CodexTest.cpp:
Add tests for the state changes in SkCodec (need to call start before
decoding scanlines; calling getPixels means that start will need to
be called again before decoding more scanlines).
Add a test which decodes in stripes, currently only used for an
interlaced PNG.
TODO: Add tests for onReallyHasAlpha.
Review URL: https://codereview.chromium.org/1365313002
SkGlyphCache dumps too many glyphs, and to reduce the trace size,
RequestDetails enum is added to SkTraceMemoryDump interface. This
would tell caches to dump only requested details or not a detailed
dump.
BUG=499731
Review URL: https://codereview.chromium.org/1310123007
• -w silences all warnings current and future. We're not using this for development.
• There's no real need to exclude files in Release mode.
The linker may whine a little, but that's fine.
• Quiet down message() calls that run every time. They're fine if you can figure out
how to run them only when doing the detection and cache them like all the others,
but I don't like the noise seeing them every run.
• cheaders is hard to read. c_headers.
• ../src/*mac* erroneously picks up SkLumaColorFilter on non-case-sensitive file systems.
../src/*_mac* seems fine.
CQ_EXTRA_TRYBOTS=client.skia.compile:Build-Mac10.9-Clang-x86_64-Release-CMake-Trybot,Build-Ubuntu-GCC-x86_64-Release-CMake-Trybot
BUG=skia:
Review URL: https://codereview.chromium.org/1376923003
Reason for revert:
Landed PS8 temporarily to trigger the perf bots.
Original issue's description:
> Implement SkImageFilter::Cache with SkResourceCache.
>
> The single global cache now uses the global SkResourceCache,
> and any Create()ed cache uses a local SkResourceCache.
>
> No real public API changes (and only deletes).
>
> I don't see any pixel diffs on .skps or GMs.
> Don't see any significant perf difference on 8888 or gpu configs.
> DM peak memory usage did drop by about 113M, close to the 128M cache size.
>
> BUG=skia:3662
>
> Landing PS8 temporarily to trigger the perf bots.
> TBR=reed@google.com
>
> Committed: https://skia.googlesource.com/skia/+/75135d8ae1aa12e8e6bfce63291e5e876a77546fTBR=reed@google.com,robertphillips@google.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:3662
Review URL: https://codereview.chromium.org/1381523002
The single global cache now uses the global SkResourceCache,
and any Create()ed cache uses a local SkResourceCache.
No real public API changes (and only deletes).
I don't see any pixel diffs on .skps or GMs.
Don't see any significant perf difference on 8888 or gpu configs.
DM peak memory usage did drop by about 113M, close to the 128M cache size.
BUG=skia:3662
Landing PS8 temporarily to trigger the perf bots.
TBR=reed@google.com
Review URL: https://codereview.chromium.org/1370323002
An alternative way of addressing this is to alter SkCanvas::drawRoundRect to just reject isEmpty (i.e., un-sorted or truly empty) input rects.
BUG=skia:3786
Review URL: https://codereview.chromium.org/1373293002
- use C++11 features ({} init, move constructors) to eliminate the need
for explicit constructors
- collapse RECORD0...RECORD8 into just one RECORD macro
- explicitly tag record types instead of using member detectors.
Removing member detectors makes this code significantly less fragile.
This exposes a few places where we didn't really think through what to do
with SkDrawable. I've marked them TODO for now.
BUG=skia:
Review URL: https://codereview.chromium.org/1360943003
Reason for revert:
Need to somehow get access to encoders in chrome -- link error on the roll since SkImageEncoder is not built as part of chrome.
Original issue's description:
> change pixel-serializer to support reencoding existing data
>
> Trying to evolve this interface so it can
> - support rich set of backend-encoders (including ones like ETC1 that can cheaply convert to KXT
> - allow for encoding images as well as bitmaps (e.g. for picture serialization)
> - perhaps replace SkImageEncoder as an API (assuming we create a factory that returns a serializer given a format)
>
> BUG=skia:
>
> Committed: https://skia.googlesource.com/skia/+/13f48dc85aa68a60da66aaf39c93d527d11d1278TBR=scroggo@google.com,msarett@google.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:
Review URL: https://codereview.chromium.org/1371983003
Reason for revert:
This CL appears to be breaking the pictureshader, pictureshadertile and tiled_picture_shader GMs on the iPad4 and the N7. The artifact is black rectangles.
Original issue's description:
> SkImage-backed SkPictureShader
>
> Instead of using an explicit image generator + SkBitmap + bitmap shader,
> switch to the shiny new SkImage/image generator/image shader.
>
> R=reed@google.com
>
> Committed: https://skia.googlesource.com/skia/+/97be9a0c86eedd8ab85ae7d9aaccb0b0a8e4577dTBR=reed@google.com,fmalita@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1374763003
Trying to evolve this interface so it can
- support rich set of backend-encoders (including ones like ETC1 that can cheaply convert to KXT
- allow for encoding images as well as bitmaps (e.g. for picture serialization)
- perhaps replace SkImageEncoder as an API (assuming we create a factory that returns a serializer given a format)
BUG=skia:
Review URL: https://codereview.chromium.org/1373683003
The test "nullptr == fBlockMemory->fHead->fNext" tests that
all of the data is in one block, but it is also necessary to
test "fBlockMemory->fHead" to ensure that there is a first
block with data in it.
Review URL: https://codereview.chromium.org/1374493002
