The earlier CL doesn't change the flag definition so it's not
turned on yet.
Bug: skia:
Change-Id: Id278ae5fc27d703ab7f6628bed95093d32cd7d0b
TBR: caryclark@google.com, fmalita@chromium.org
Reviewed-on: https://skia-review.googlesource.com/28161
Commit-Queue: Yuqian Li <liyuqian@google.com>
Reviewed-by: Yuqian Li <liyuqian@google.com>
DAA is:
1. Much simpler than AAA.
SkScan_AAAPath.cpp is about 1700 lines.
SkScan_DAAPath.cpp is about 300 lines.
The whole DAA CL is only about 800 lines.
2. Much faster than AAA for complicated paths.
The speedup applies to GL backend (including ccpr)!
Here's the frame time of 'SampleApp --slide Chart' on macbook pro:
AAA-raster: 33ms
DAA-raster: 21ms
AAA-gl: 30ms
DAA-gl: 20ms
AAA-ccpr: 18ms
DAA-ccpr: 12ms
My linux desktop doesn't have SSE3 so the speedup is smaller
(~25% for Chart). I believe that DAA is so fast that I can enable
it for any paths (AAA is not enabled by default for complicated
paths because it is slow; hence our older supersampling scan
converter is used for stroking on Chart for AAA-xxx config.)
3. The SkCoverageDelta is suitable for threaded backend with
out-of-order concurrent scan conversion as commented in the source
code. Maybe we can also just send deltas to GPU.
4. Similar to most analytic path renderers, the quality is on the best
ground-truth level, unless there are intersections within a pixel.
The intersections look good to my eyes although theoretically that
could be arbitrary far from the ground truth (see my AAA slides).
5. For simple paths, such as circle, triangle, rrect, etc., DAA is
slower than AAA. But DAA is faster than our older supersampling
scan converter in most cases. As those simple paths usually don't
constitute the bottleneck of a picture (skp or svg), I strongly
recommend use DAA.
6. DAA also heavily favors blitMask so it may work quite well with
SkRasterPipeline and SkRasterPipelineBlitter.
Finally, please check https://skia-review.googlesource.com/c/22420/
which accelerate DAA by specializing blitCoverageDeltas for
SkARGB32_Blitter and SkARGB32_Black_Blitter. It brings a little(<5%)
speedup. But I couldn't figure out how to reduce the duplicate code
so I don't intend to land it.
Bug: skia:
Change-Id: I3b7ed6a727447922e645b1acb737a506e7c09a4c
Reviewed-on: https://skia-review.googlesource.com/19666
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Cary Clark <caryclark@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
Not yet thread safe (so it forces threading off).
Builds JSON on the fly, so overhead is certainly bad.
Plan to fix all of that, but this at least "works".
There is now one tracing flag: 'trace'.
- 'debugf' installs the SkDebugf tracer.
- 'atrace' installs the Android ATrace tracer.
- Any other value is interpreted as a filename, and
produces a JSON file for chrome://tracing.
All three modes work in DM, nanobench, and Viewer.
Bug: skia:
Change-Id: I3fbc22382b99418a508c670be2770195c0a1c364
Reviewed-on: https://skia-review.googlesource.com/24781
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Also adds more trace events to GPU backend.
Change-Id: Ifa5f0cd4b1fd582f0cc30d37d9e6414dc498c75d
Reviewed-on: https://skia-review.googlesource.com/24622
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Change-Id: I395e3387df44cf5370fef6ab73db73228225622f
Reviewed-on: https://skia-review.googlesource.com/23946
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Initial implementation of a GPU path renderer that draws antialiased
paths by counting coverage in an offscreen buffer.
Initially disabled until it has had time to soak.
Bug: skia:
Change-Id: I003d8cfdf8dc62641581b5ea2dc4f0aa00108df6
Reviewed-on: https://skia-review.googlesource.com/21541
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Bug: skia:
Change-Id: I84dbd56c17d4856496af4491f340ec560e29c8a6
Reviewed-on: https://skia-review.googlesource.com/23200
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
When asking for help on more than one item,
e.g. foo -h me -h oh -h my just print Flags:
once.
TBR=scroggo@google.com
Change-Id: I67080c7390e6bacf4c36096304dd959229fdd07b
Reviewed-on: https://skia-review.googlesource.com/21660
Reviewed-by: Cary Clark <caryclark@skia.org>
Commit-Queue: Cary Clark <caryclark@skia.org>
Certain systems experience a leak in the GL driver associated with
stencil buffers. Attempts to avoid the leak (while still using stencil
buffers) dind't succeed. This patch adds a GrContextOption
fAvoidStencilBuffers. This disables certain path rendering modes, as
well as stencil based masking/clipping.
Bug: 713854
Change-Id: Ifa6c0f2bd5ee395547bda9165d6c79d197ae8b8b
Reviewed-on: https://skia-review.googlesource.com/15253
Commit-Queue: Eric Karl <ericrk@chromium.org>
Reviewed-by: Eric Karl <ericrk@chromium.org>
Reviewed-by: Brian Salomon <bsalomon@google.com>
BUG=skia:
Change-Id: Ia0688876915cd773614ca0c4ccd467cf6e7c603e
Reviewed-on: https://skia-review.googlesource.com/10105
Commit-Queue: Matt Sarett <msarett@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Change-Id: If752152daabcdb7420fd13863fea4ce49f725aab
Reviewed-on: https://skia-review.googlesource.com/10108
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
BUG=skia:
Change-Id: I053cce7c05c74860cbace00cd94ea4b96e9a482c
Reviewed-on: https://skia-review.googlesource.com/9889
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
This changes the names of several shorthand names for gpu configs to be prefixed either with "gl" or "gles" and makes the bots only use such configs. It adds some missing named configs.
Change-Id: Iea4e0e2ddafe0ac08e623111a15be7335156957c
Reviewed-on: https://skia-review.googlesource.com/9833
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Also disables use of small distance fields in Android framework.
Change-Id: I1ba40ce85aa34d067608587e1fbe1d42e8a42868
Reviewed-on: https://skia-review.googlesource.com/9731
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Chris Dalton <csmartdalton@google.com>
BUG=skia:
Change-Id: Ief7516c1505f8e447f83121ed4ba75b9fa9ba75b
Reviewed-on: https://skia-review.googlesource.com/8976
Commit-Queue: Matt Sarett <msarett@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
BUG=skia:
Change-Id: I248ba081f0229d7fcf2071009076acc88b80b076
Reviewed-on: https://skia-review.googlesource.com/9088
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Adds a bitfield to GrContextOptions that masks out path renderers.
Adds commandline flags support to set this bitfield in tools apps.
Removes GrGLInterfaceRemoveNVPR since we can now accomplish the same
thing in the context options.
BUG=skia:
Change-Id: Icf2a4df36374b3ba2f69ebf0db56e8aedd6cf65f
Reviewed-on: https://skia-review.googlesource.com/8786
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Also changes the behavior of these flags to only override their
corresponding context options when set, and to leave them unchanged
when not set.
BUG=skia:
Change-Id: I09f6be09997594fa888d9045dd4901354ef3f880
Reviewed-on: https://skia-review.googlesource.com/8780
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
BUG=skia:
Change-Id: I01c5e1874c9a034febc64e25b3aaafb5050393a6
Reviewed-on: https://skia-review.googlesource.com/8021
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Matt Sarett <msarett@google.com>
The only difference is that we now also put the guard flag
SK_SUPPORT_LEGACY_AAA in SkUserConfig.h. Previously, SkAnalyticEdge.cpp doesn't
get that flag from SkScan.h and that caused many problems.
BUG=skia:
TBR=reed@google.com,caryclark@google.com
Change-Id: I134bb76cebd6fffa712f438076668765321bba3b
Reviewed-on: https://skia-review.googlesource.com/6992
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
This reverts commit b46fff60bc.
Reason for revert: possible chromium cc unit tests failure
Change-Id: Ie174c55e4d0fc3ae45854b5897ba26b7ad5a9c13
Reviewed-on: https://skia-review.googlesource.com/6981
Commit-Queue: Yuqian Li <liyuqian@google.com>
Reviewed-by: Yuqian Li <liyuqian@google.com>
The only difference is that we now put the guard flag SK_SUPPORT_LEGACY_AAA in
SkUserConfig.h instead of SkScan.h. Previously, SkAnalyticEdge.cpp doesn't get
that flag from SkScan.h and that caused many problems.
BUG=skia:
TBR=reed@google.com,caryclark@google.com
Change-Id: I7b89d3cb64ad71715101d2a5e8e77be3a8a6fa16
Reviewed-on: https://skia-review.googlesource.com/6972
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
This reverts commit 89a0e72287.
Reason for revert: <INSERT REASONING HERE>
Original change's description:
> Implement Analytic AA for General Paths (with Guard against Chrome)
>
> I've set up a SK_SUPPORT_LEGACY_AAA flag to guard against Chromium layout tests. I also set that flag in this CL so theoretically this CL won't trigger any GM changes. I'll use this to verify my guard, and remove that flag and actually enables concave AAA in a future CL.
>
> When enabled, for most simple concave paths (e.g., rectangle stroke, rrect stroke, sawtooth, stars...), the Analytic AA achieves 1.3x-2x speedup, and they look much prettier. And they probably are the majority in our use cases by number. But they probably are not the majority by time cost; a single complicated path may cost 10x-100x more time to render than a rectangle stroke... For those complicated paths, we fall back to supersampling by default as we're likely to be 1.1-1.2x slower and the quality improvement is not visually significant. However, one can use gSkForceAnalyticAA to disable that fallback.
>
> BUG=skia:
>
> Change-Id: If9549a3acc4a187cfaf7eb51890c148da3083d31
> Reviewed-on: https://skia-review.googlesource.com/6091
> Reviewed-by: Mike Reed <reed@google.com>
> Commit-Queue: Yuqian Li <liyuqian@google.com>
>
TBR=caryclark@google.com,liyuqian@google.com,reed@google.com
BUG=skia:
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Change-Id: I13c05aaa1bcb14956bd0fe01bb404e41be75af22
Reviewed-on: https://skia-review.googlesource.com/6961
Commit-Queue: Yuqian Li <liyuqian@google.com>
Reviewed-by: Yuqian Li <liyuqian@google.com>
I've set up a SK_SUPPORT_LEGACY_AAA flag to guard against Chromium layout tests. I also set that flag in this CL so theoretically this CL won't trigger any GM changes. I'll use this to verify my guard, and remove that flag and actually enables concave AAA in a future CL.
When enabled, for most simple concave paths (e.g., rectangle stroke, rrect stroke, sawtooth, stars...), the Analytic AA achieves 1.3x-2x speedup, and they look much prettier. And they probably are the majority in our use cases by number. But they probably are not the majority by time cost; a single complicated path may cost 10x-100x more time to render than a rectangle stroke... For those complicated paths, we fall back to supersampling by default as we're likely to be 1.1-1.2x slower and the quality improvement is not visually significant. However, one can use gSkForceAnalyticAA to disable that fallback.
BUG=skia:
Change-Id: If9549a3acc4a187cfaf7eb51890c148da3083d31
Reviewed-on: https://skia-review.googlesource.com/6091
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
Also add ANGLE ES3 predefined configs.
BUG=skia:
CQ_INCLUDE_TRYBOTS=skia.primary:Test-Win10-MSVC-ShuttleC-GPU-GTX960-x86_64-Debug-ANGLE
Change-Id: Ib7394afa961da1afe91c6dfefe08528273d3087c
Reviewed-on: https://skia-review.googlesource.com/6698
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
This reverts commit 151d3b18fa.
Reason for revert: broken bots
Original change's description:
> Get latest ANGLE as of January 6, 2017
>
> Also add ANGLE ES3 predefined configs.
>
> BUG=skia:
>
> Change-Id: I28d87b0676395d047e49bbb926db330f76cf17bd
> Reviewed-on: https://skia-review.googlesource.com/6683
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Commit-Queue: Brian Osman <brianosman@google.com>
>
TBR=bsalomon@google.com,brianosman@google.com,reviews@skia.org
BUG=skia:
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Change-Id: I8e893761308044abbeabf52fc8f0fc83d84b98b1
Reviewed-on: https://skia-review.googlesource.com/6687
Commit-Queue: Mike Klein <mtklein@chromium.org>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Also add ANGLE ES3 predefined configs.
BUG=skia:
Change-Id: I28d87b0676395d047e49bbb926db330f76cf17bd
Reviewed-on: https://skia-review.googlesource.com/6683
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This code involves Skia having knowledge of HWUI internals and
causes problems with various build systems. It is also not
currently being used and is therefore expendable.
Change-Id: I7b6a37fa4c9afcefbc6a957b49e7735da872ff14
Reviewed-on: https://skia-review.googlesource.com/6597
Commit-Queue: Derek Sollenberger <djsollen@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
This reverts commit ada12ab055.
Reason for revert: Google3 needs it:
https://test.corp.google.com/ui#id=OCL:142184832:BASE:142184975:1481839118985:32fde8ef
Original change's description:
> Remove all KTX support
>
> It is untested and unused.
>
> Change-Id: I010ff4ad942738f362d42a99af4edbbb1cb0cd71
> Reviewed-on: https://skia-review.googlesource.com/6142
> Commit-Queue: Leon Scroggins <scroggo@google.com>
> Reviewed-by: Mike Klein <mtklein@chromium.org>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
>
TBR=mtklein@chromium.org,mtklein@google.com,robertphillips@google.com,scroggo@google.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Change-Id: I1ea2f9487eb2212efbfcc514122792b70c9e8737
Reviewed-on: https://skia-review.googlesource.com/6181
Commit-Queue: Leon Scroggins <scroggo@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
It is untested and unused.
Change-Id: I010ff4ad942738f362d42a99af4edbbb1cb0cd71
Reviewed-on: https://skia-review.googlesource.com/6142
Commit-Queue: Leon Scroggins <scroggo@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Reviewed-by: Robert Phillips <robertphillips@google.com>
1) Our older iOS devices failed our sRGB tests, due to precision issues
with alpha. At this point, we only test on iPadMini 4, and that appears
not to have any problems.
2) iOS devices still don't have the sRGB texture decode extension. But,
some clients have no interest in mixing legacy/color-correct rendering,
and would like to use sRGB on these devices. This GrContextOptions flag
enables sRGB support in those cases.
Adjust the test code to produce sRGB capable contexts on these devices,
but only for configs that have a color space. (See comment).
BUG=skia:4148
Committed: https://skia.googlesource.com/skia/+/9db12d2341f3f8722c8b90b11dd4cce138a8a64e
Committed: https://skia.googlesource.com/skia/+/1aeb78c5d978b35b256525b711edd942bce01444
Review-Url: https://codereview.chromium.org/2539993002
Reason for revert:
Command Buffer, too...
Original issue's description:
> Two (related) changes here:
>
> 1) Our older iOS devices failed our sRGB tests, due to precision issues
> with alpha. At this point, we only test on iPadMini 4, and that appears
> not to have any problems.
>
> 2) iOS devices still don't have the sRGB texture decode extension. But,
> some clients have no interest in mixing legacy/color-correct rendering,
> and would like to use sRGB on these devices. This GrContextOptions flag
> enables sRGB support in those cases.
>
> Adjust the test code to produce sRGB capable contexts on these devices,
> but only for configs that have a color space. (See comment).
>
> BUG=skia:4148
>
> Committed: https://skia.googlesource.com/skia/+/9db12d2341f3f8722c8b90b11dd4cce138a8a64e
> Committed: https://skia.googlesource.com/skia/+/1aeb78c5d978b35b256525b711edd942bce01444TBR=bsalomon@google.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4148
Review-Url: https://codereview.chromium.org/2546783005
1) Our older iOS devices failed our sRGB tests, due to precision issues
with alpha. At this point, we only test on iPadMini 4, and that appears
not to have any problems.
2) iOS devices still don't have the sRGB texture decode extension. But,
some clients have no interest in mixing legacy/color-correct rendering,
and would like to use sRGB on these devices. This GrContextOptions flag
enables sRGB support in those cases.
Adjust the test code to produce sRGB capable contexts on these devices,
but only for configs that have a color space. (See comment).
BUG=skia:4148
Committed: https://skia.googlesource.com/skia/+/9db12d2341f3f8722c8b90b11dd4cce138a8a64e
Review-Url: https://codereview.chromium.org/2539993002
Reason for revert:
ANGLE tests are failing
Original issue's description:
> Two (related) changes here:
>
> 1) Our older iOS devices failed our sRGB tests, due to precision issues
> with alpha. At this point, we only test on iPadMini 4, and that appears
> not to have any problems.
>
> 2) iOS devices still don't have the sRGB texture decode extension. But,
> some clients have no interest in mixing legacy/color-correct rendering,
> and would like to use sRGB on these devices. This GrContextOptions flag
> enables sRGB support in those cases.
>
> Adjust the test code to produce sRGB capable contexts on these devices,
> but only for configs that have a color space. (See comment).
>
> BUG=skia:4148
>
> Committed: https://skia.googlesource.com/skia/+/9db12d2341f3f8722c8b90b11dd4cce138a8a64eTBR=bsalomon@google.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4148
Review-Url: https://codereview.chromium.org/2547603002
1) Our older iOS devices failed our sRGB tests, due to precision issues
with alpha. At this point, we only test on iPadMini 4, and that appears
not to have any problems.
2) iOS devices still don't have the sRGB texture decode extension. But,
some clients have no interest in mixing legacy/color-correct rendering,
and would like to use sRGB on these devices. This GrContextOptions flag
enables sRGB support in those cases.
Adjust the test code to produce sRGB capable contexts on these devices,
but only for configs that have a color space. (See comment).
BUG=skia:4148
Review-Url: https://codereview.chromium.org/2539993002
It is moved to src/utils. It is almost a tool, but has two uses in
src/ports.
The existing SkOSFile.cpp is left empty for the time being since it is
mentioned in Chromium's BUILD.gn for Skia.
Change-Id: I3bb7f7c4214359eb6ab906bfe76737d20bf1d6c7
Reviewed-on: https://skia-review.googlesource.com/4536
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Ben Wagner <bungeman@google.com>
Replace with std::unique_ptr.
Change-Id: I5806cfbb30515fcb20e5e66ce13fb5f3b8728176
Reviewed-on: https://skia-review.googlesource.com/4381
Commit-Queue: Ben Wagner <bungeman@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Our internal definition is (and will continue to be) that anything with
a color space is gamma correct. F16 is irrelevant (whether or not we
choose to support untagged F16). This makes these helpers less than
helpful, and lets us remove them from (public) API.
API change is just removal (of unused functions).
TBR=reed@google.com
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=4228
Change-Id: Ia84a423548bfee14a3ba4a43d6d5b8c4686fb5ff
Reviewed-on: https://skia-review.googlesource.com/4228
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Now that we're declaring flags statically per-tool, we were only
setting the value on one of them (randomly) in the linked list.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=3881
Change-Id: I448cb7f42ee01a16daa65986b14aee9f1a2a3588
Reviewed-on: https://skia-review.googlesource.com/3881
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Brian Osman <brianosman@google.com>
Matches our naming convention for all other types - factories that
return sk_sp (or any type that intelligently manages its own
lifetime) are named Make.
Previous factories are still around, assuming
SK_SUPPORT_LEGACY_COLOR_SPACE_FACTORIES is defined. Enable that
define for Android, etc.
See also: https://codereview.chromium.org/2442053002/
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=3822
Change-Id: Iaea9376490736b494e8ffc820831f052bbe1478d
Reviewed-on: https://skia-review.googlesource.com/3822
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
CQ_INCLUDE_TRYBOTS=master.client.skia:Test-Win-MSVC-ShuttleC-GPU-GTX960-x86_64-Debug-ANGLE-Trybot
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=3724
Change-Id: Ic3d6efcb331ac3947026476e357e76214f2ccdf8
Reviewed-on: https://skia-review.googlesource.com/3724
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
