This reverts commit 6c1191d749.
Reason for revert:
- the lowest-level issue is fixed in https://skia-review.googlesource.com/c/skia/+/337076
which prevents bad replaceClips from going beyond the device bounds
- but this also updates the original CL so that we don't call
replaceClip in these problematic situations. The old behavior of
effectively downgrading a saveLayer to a save when the new device
fails to allocate is better behavior.
- now the bounds tracking is still consolidated as before, but only
applied when the kNoLayer_Strategy is used, or the layer should be
empty (in which case replaceClip() is passed an empty rect and
everything works out).
- when the layer fails to allocate, we add a clipRegion to restrict
nested draw calls to what would have been the layers bounds, while
still respecting the old clip (that normally would have been applied
on the layer restore, but won't because there's no layer). This is
somewhat pedantic, and is probably a rare case in the wild, but it
makes some of our SkCanvas tests easier to deal with.
- This is because, if you just make an SkCanvas(width, height) directly
you get an SkNoPixelsDevice but also use the kFullLayer_Strategy.
SkNoPixelsDevice always fails to create a layer (since it's meant to
be used with subclasses of SkCanvas that return kNoLayer_Strategy,
like SkNoDrawCanvas).
- applying the failed layer bounds as a clip keeps the canvas' reported
bounds as accurate as possible in this case.
- in the future, it may be worth updating how SkCanvas can be
constructed to avoid this, and overhauling the unit tests but
I didn't want to further delay these changes.
- it's important that replaceClip() is still used for the kNoLayer case
because it allows image-filtered layers to expand the clip bounds
until the restore. This keeps any virtual canvas or recording canvas
completely in-sync with the base canvas or eventual real canvas that
is backed by a device that actually draws.
Original change's description:
> Revert "Simplify layer bounds syncing and no-device error handling in SkCanvas::internalSaveLayer"
>
> This reverts commit b27ba538ec.
>
> Reason for revert: causes invalid memory accesses due to replaceClip use, and replaceClip() is probably not the right operation to use
> to emulate a layer when no layer was the strategy or failed to allocate.
>
> Original change's description:
> > Simplify layer bounds syncing and no-device error handling in SkCanvas::internalSaveLayer
> >
> > This corrects some subtle bugs that can occur with recording canvas or
> > if a device fails to be created for a new layer, where the stashed
> > matrix would not be restored properly. Since no new DeviceCM would get
> > added in those cases, the canvas' total matrix wouldn't get fixed in the
> > paired onRestore() and it would remain dirty for the remainder of the
> > canvas's lifetime.
> >
> > After this change, the underlying SkDevice's bounds are also kept in
> > sync with the intent of the saveLayer when kNoLayer_Strategy is used.
> > Previously, the bounds would be applied to the canvas' conservative clip
> > and quick reject bounds, but the device would remain un-updated. As we
> > move towards SkNoPixelsDevice taking over the conservative clip bounds,
> > this ensures bounds remain up to date within a saveLayer/restore pair
> > even if no layer was allocated.
> >
> > Change-Id: I5ca389bdd624ea7278106da863a96e9d8f90e2d1
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/335861
> > Reviewed-by: Mike Reed <reed@google.com>
> > Commit-Queue: Michael Ludwig <michaelludwig@google.com>
>
> TBR=mtklein@google.com,bsalomon@google.com,reed@google.com,michaelludwig@google.com
>
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Bug: chromium:1151195, chromium:1151270, chromium:1151294, chromium:1151320, chromium:1151322
> Change-Id: I9db07916ffc450cc6ecc9188d72bb7c35770a974
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/337117
> Reviewed-by: Michael Ludwig <michaelludwig@google.com>
> Commit-Queue: Michael Ludwig <michaelludwig@google.com>
TBR=mtklein@google.com,bsalomon@google.com,reed@google.com,michaelludwig@google.com
# Not skipping CQ checks because this is a reland.
Change-Id: Idcab9084c7f19d8f31b11231fd9b52292fc397a3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/337157
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
do not land
Change-Id: I5fa7b2a0d1eb7e893d9b333f850a2f515d7ce065
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/336956
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
This reverts commit b27ba538ec.
Reason for revert: causes invalid memory accesses due to replaceClip use, and replaceClip() is probably not the right operation to use
to emulate a layer when no layer was the strategy or failed to allocate.
Original change's description:
> Simplify layer bounds syncing and no-device error handling in SkCanvas::internalSaveLayer
>
> This corrects some subtle bugs that can occur with recording canvas or
> if a device fails to be created for a new layer, where the stashed
> matrix would not be restored properly. Since no new DeviceCM would get
> added in those cases, the canvas' total matrix wouldn't get fixed in the
> paired onRestore() and it would remain dirty for the remainder of the
> canvas's lifetime.
>
> After this change, the underlying SkDevice's bounds are also kept in
> sync with the intent of the saveLayer when kNoLayer_Strategy is used.
> Previously, the bounds would be applied to the canvas' conservative clip
> and quick reject bounds, but the device would remain un-updated. As we
> move towards SkNoPixelsDevice taking over the conservative clip bounds,
> this ensures bounds remain up to date within a saveLayer/restore pair
> even if no layer was allocated.
>
> Change-Id: I5ca389bdd624ea7278106da863a96e9d8f90e2d1
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/335861
> Reviewed-by: Mike Reed <reed@google.com>
> Commit-Queue: Michael Ludwig <michaelludwig@google.com>
TBR=mtklein@google.com,bsalomon@google.com,reed@google.com,michaelludwig@google.com
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:1151195, chromium:1151270, chromium:1151294, chromium:1151320, chromium:1151322
Change-Id: I9db07916ffc450cc6ecc9188d72bb7c35770a974
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/337117
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
This corrects some subtle bugs that can occur with recording canvas or
if a device fails to be created for a new layer, where the stashed
matrix would not be restored properly. Since no new DeviceCM would get
added in those cases, the canvas' total matrix wouldn't get fixed in the
paired onRestore() and it would remain dirty for the remainder of the
canvas's lifetime.
After this change, the underlying SkDevice's bounds are also kept in
sync with the intent of the saveLayer when kNoLayer_Strategy is used.
Previously, the bounds would be applied to the canvas' conservative clip
and quick reject bounds, but the device would remain un-updated. As we
move towards SkNoPixelsDevice taking over the conservative clip bounds,
this ensures bounds remain up to date within a saveLayer/restore pair
even if no layer was allocated.
Change-Id: I5ca389bdd624ea7278106da863a96e9d8f90e2d1
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/335861
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Bug: skia:9283
Change-Id: I1f808ec9d004f228b17a139dff7a2f44676baf50
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/335856
Commit-Queue: Mike Reed <reed@google.com>
Auto-Submit: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Mike Reed <reed@google.com>
This better differentiates it from device clip bounds, and the fact that
the stored bounds have been outset by 1 to account for AA, and are only
used for quick reject purposes.
Bug: skia:9283
Change-Id: I47420f23b74e47626596f978c78f01d7d97ae808
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/335828
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Mike Reed <reed@google.com>
This code has rotted a bit. The glyph off set is now calculated
by mapping (0,0) through the current matrix, and the initial
matrix, and taking the vector difference. Residual is no longer
needed and all the plumbing can be removed.
Change-Id: I20b56afc6749fd26fe283a7ff22f38951da0e6f5
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/335823
Reviewed-by: Robert Phillips <robertphillips@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Bug: skia:10632
Change-Id: I72b4379c82fd7dc4c7169387014f8fffbb86e23f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/334161
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
It's a bad idea, difficult to reason about, and may be causing
deadlocks.
Change-Id: Id9749661f4f3f942ee983e9c1fdab2bd7f287edb
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/335242
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
This is a reland of 4fdf9f9ce5
No change from the original, which was just reverted to be able to
cleanly revert its parent, which has now been relanded with a fix.
Original change's description:
> SkAnimatedImage: Use fSampleSize
>
> Bug: b/163595585
>
> This will allow using less memory when decoding an animated GIF by
> sampling at decode time. This is tested by the animated_image GMs.
>
> Change-Id: I748b2180827623e4ca1fc0fd4d6dd02733b3b5f2
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/333226
> Commit-Queue: Leon Scroggins <scroggo@google.com>
> Reviewed-by: Derek Sollenberger <djsollen@google.com>
Bug: b/163595585
Change-Id: I3249bd04b64750a50a4c5c787db3e80ac4d85e67
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/335279
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
This reverts commit 971b19d0c6.
Reason for revert: See if this CL was causing the Perf-Win10-Clang-ShuttleA-GPU-GTX660-x86_64-Release-All issue
Original change's description:
> Remove SkBaseDevice::flush
>
> Another small step in removing SkCanvas::flush
>
> Change-Id: I6f17edcd1996e1009dad7cc96a97be3b0c4664f4
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/334417
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Reviewed-by: Adlai Holler <adlai@google.com>
> Commit-Queue: Robert Phillips <robertphillips@google.com>
TBR=egdaniel@google.com,bsalomon@google.com,robertphillips@google.com,adlai@google.com
Change-Id: I0b9116f8ce4eed3a0d49ccf1cc55d8d89675617e
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/335216
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This is a reland of fc4fdc5b25
Original change's description:
> SkAndroidCodec: Support decoding all frames
>
> Bug: b/160984428
> Bug: b/163595585
>
> Add support to SkAndroidCodec for decoding all frames with an
> fSampleSize, so that an entire animation can be decoded to a smaller
> size.
>
> dm/:
> - Test scaled + animated decodes
>
> SkAndroidCodec:
> - Make AndroidOptions inherit from SkCodec::Options. This allows
> SkAndroidCodec to use fFrameIndex. (It also combines the two versions
> of fSubset, which is now const for both.)
> - Respect fFrameIndex, and call SkCodec::handleFrameIndex to decode
> the required frame.
> - Disallow decoding with kRespect + fFrameIndex > 0 if there is a
> non-default orientation. As currently written (except without
> disabling this combination), SkPixmapPriv::Orient would draw the new
> portion of the frame on top of uninitialized pixels, instead of the
> prior frame. This could be fixed by
> - If SkAndroidCodec needs to decode the required frame, it could do so
> without applying the orientation, then decode fFrameIndex, and then
> apply the orientation.
> - If the client provided the required frame, SkAndroidCodec would need
> to un-apply the orientation to get the proper starting state, then
> decode and apply.
> I think it is simpler to force the client to handle the orientation
> externally.
>
> SkCodec:
> - Allow SkAndroidCodec to call its private method handleFrameIndex. This
> method handles decoding a required frame, if necessary. When called by
> SkAndroidCodec, it now uses the SkAndroidCodec to check for/decode the
> required frame, so that it will scale properly.
> - Call rewindIfNeeded inside handleFrameIndex. handleFrameIndex calls a
> virtual method which may set some state (e.g. in SkJpegCodec). Without
> this change, that state would be reset by rewindIfNeeded.
> - Simplify handling a kRestoreBGColor frame. Whether provided or not,
> take the same path to calling zero_rect.
> - Updates to zero_rect:
> - Intersect after scaling, which will also check for empty.
> - Round out instead of in - this ensures we don't under-erase
> - Use kFill_ScaleToFit, which better matches the intent.
>
> Change-Id: Ibe1951980a0dca8f5b7b1f20192432d395681683
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/333225
> Commit-Queue: Leon Scroggins <scroggo@google.com>
> Reviewed-by: Derek Sollenberger <djsollen@google.com>
Bug: b/160984428
Bug: b/163595585
Change-Id: I7c1e79e0f92c75b4840eef65c8fc2b8497189e81
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/334842
Auto-Submit: Leon Scroggins <scroggo@google.com>
Commit-Queue: Derek Sollenberger <djsollen@google.com>
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Another small step in removing SkCanvas::flush
Change-Id: I6f17edcd1996e1009dad7cc96a97be3b0c4664f4
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/334417
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Adlai Holler <adlai@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Will be used Chrome to convert subsampled info to k444.
Bug: skia:10632
Change-Id: Ife9bdf3a28aeb6db1de063539a8b1664bdcbdb5e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/334958
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Auto-Submit: Brian Salomon <bsalomon@google.com>
This is needed to help ease the migration from SkImageFilters::Paint,
until image shaders always force you to embed sampling options.
Change-Id: Id8dc8c3196a7935073677a5fbb8d35c3bd22f9ba
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/333757
Auto-Submit: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
To help stage clients away from SkFilterQuality
Change-Id: Icf9d192880caa16a82f9774cc99c97e096f8e678
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/334162
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Also inline some helper functions into newer factory method
that are no longer shared.
Bug: skia:10632
Change-Id: I466c59f668d882802087acad1ec1f229505a3377
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/334596
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit fc4fdc5b25.
Reason for revert: Google3 and ASAN failures
Change-Id: I890cd76109c0375391637f879550837d01e650f9
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/334840
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
This reverts commit 4fdf9f9ce5.
Reason for revert: Google3 and ASAN failures caused by the prior
change, which this depends on.
Original change's description:
> SkAnimatedImage: Use fSampleSize
>
> Bug: b/163595585
>
> This will allow using less memory when decoding an animated GIF by
> sampling at decode time. This is tested by the animated_image GMs.
>
> Change-Id: I748b2180827623e4ca1fc0fd4d6dd02733b3b5f2
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/333226
> Commit-Queue: Leon Scroggins <scroggo@google.com>
> Reviewed-by: Derek Sollenberger <djsollen@google.com>
TBR=djsollen@google.com,scroggo@google.com
Change-Id: I0d30ada4eba2302ce0c5f85b1174d0618ae0f589
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: b/163595585
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/334839
Commit-Queue: Leon Scroggins <scroggo@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Bug: b/163595585
This will allow using less memory when decoding an animated GIF by
sampling at decode time. This is tested by the animated_image GMs.
Change-Id: I748b2180827623e4ca1fc0fd4d6dd02733b3b5f2
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/333226
Commit-Queue: Leon Scroggins <scroggo@google.com>
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Bug: b/160984428
Bug: b/163595585
Add support to SkAndroidCodec for decoding all frames with an
fSampleSize, so that an entire animation can be decoded to a smaller
size.
dm/:
- Test scaled + animated decodes
SkAndroidCodec:
- Make AndroidOptions inherit from SkCodec::Options. This allows
SkAndroidCodec to use fFrameIndex. (It also combines the two versions
of fSubset, which is now const for both.)
- Respect fFrameIndex, and call SkCodec::handleFrameIndex to decode
the required frame.
- Disallow decoding with kRespect + fFrameIndex > 0 if there is a
non-default orientation. As currently written (except without
disabling this combination), SkPixmapPriv::Orient would draw the new
portion of the frame on top of uninitialized pixels, instead of the
prior frame. This could be fixed by
- If SkAndroidCodec needs to decode the required frame, it could do so
without applying the orientation, then decode fFrameIndex, and then
apply the orientation.
- If the client provided the required frame, SkAndroidCodec would need
to un-apply the orientation to get the proper starting state, then
decode and apply.
I think it is simpler to force the client to handle the orientation
externally.
SkCodec:
- Allow SkAndroidCodec to call its private method handleFrameIndex. This
method handles decoding a required frame, if necessary. When called by
SkAndroidCodec, it now uses the SkAndroidCodec to check for/decode the
required frame, so that it will scale properly.
- Call rewindIfNeeded inside handleFrameIndex. handleFrameIndex calls a
virtual method which may set some state (e.g. in SkJpegCodec). Without
this change, that state would be reset by rewindIfNeeded.
- Simplify handling a kRestoreBGColor frame. Whether provided or not,
take the same path to calling zero_rect.
- Updates to zero_rect:
- Intersect after scaling, which will also check for empty.
- Round out instead of in - this ensures we don't under-erase
- Use kFill_ScaleToFit, which better matches the intent.
Change-Id: Ibe1951980a0dca8f5b7b1f20192432d395681683
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/333225
Commit-Queue: Leon Scroggins <scroggo@google.com>
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Makes the Metal backend more consistent with the other backends,
and allows new init parameters to be added without significantly
changing API.
Added updated sk_cf_obj because I needed some of its functionality.
Bug: skia:10804
Change-Id: I6f1dd1c03ddc4c4b702ea75eff14bc0f98ab5ad2
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/334426
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Bug: skia:10914
Bug: b/163595585
In a WebP image, it is possible to combine animation with an EXIF
orientation. While SkAndroidCodec attempts to handle orientation itself
by decoding into temporary memory and then drawing through a matrix,
this doesn't work directly when compositing a P-frame into a prior
frame. SkAnimatedImage already uses an SkMatrix to handle cropping and
scaling, so update that matrix to include the orientation.
Make SkAnimatedImage a friend of SkAndroidCodec. This allows the former
to have the same ExifOrientationBehavior specified by the latter, and to
recreate the latter so it does not try to handle the orientation itself.
Clip SkAnimatedImage to its bounds. Android's AnimatedImageDrawable
performs its own clip, but this makes a crop rect work for other
clients.
Update getCurrentFrame to take cropping, scaling, and orientation into
account. This method is used by CanvasKit, which does not use cropping
or scaling, but will now properly orient an animation with an EXIF
orientation.
Add a GM that exercises the various combinations of ways SkAnimatedImage
can be used:
- via newPictureSnapshot (as in Android) versus getCurrentFrame
- scaling down to a dimension that can be output from the
SkAndroidCodec, versus up, which SkAnimatedImage scales
- with a crop rect
- with a post processor
Change-Id: If1854e9aea23fc4afddf75d39132b38e3fbc6071
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/333223
Commit-Queue: Leon Scroggins <scroggo@google.com>
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Bug: skia:10914
SkAnimCodecPlayer:
- Properly handle orientation, whether the image is still or not
- Mark const methods as const
- Fix seek() so that if you seek to the duration of frame 0, it will
show frame 1
- Fix the SkImageInfo so if the first frame is opaque, but following
frames are not, those frames can still be decoded
resources:
- Rename "webp-animated.webp" to "stoplight.webp", which better
describes the animation
- Update test files accordingly
- Add "stoplight_h.webp", which is the same animation with an EXIF
that converts it to a horizontal stoplight
AnimCodecPlayer test:
- Test the new image files
- Verify SkAnimCodecPlayer::dimensions behaves as expected
- Remove extra debugging line
- Provide better error messages
AnimCodecPlayerExifGM:
- Add a new GM that shows all frames of the new animation with an EXIF
orientation
- Add a new GM that shows all frames of an animation with an opaque
first frame followed by frames with alpha
Change-Id: I43cf91c16d52aa1901eef8e13e1e644eea6058b3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/332753
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
Sometimes it's helpful to think about subsampling separately from
how the channels are spread across planes.
Bug: skia:10632
Change-Id: Ib03f71195f9706ef6def418b1f2125c29e0cf738
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/334102
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
The only caller is CanvasKit, and SkAnimatedImage already has getBounds
(from SkDrawable) which does the same thing, except it returns
SkScalars. It also takes scaling and cropping into account, which
CanvasKit does not use, and in a future commit, it will consider
orientation. Switch CanvasKit to use getBounds.
Change-Id: Ia956f91d241641aec450f3aba99583e95a3ff386
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/333222
Commit-Queue: Leon Scroggins <scroggo@google.com>
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Reviewed-by: Kevin Lubick <kjlubick@google.com>
This version was used before we added the version with an SkImageInfo
parameter to handle the SkColorSpace. That version supports all use
cases supported by this old one.
Change-Id: I966cfc83ac34d4951283eaf9e81febb032f461cf
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/333221
Commit-Queue: Leon Scroggins <scroggo@google.com>
Auto-Submit: Leon Scroggins <scroggo@google.com>
Reviewed-by: Derek Sollenberger <djsollen@google.com>
The documentation implied that the paint would affect the advance
widths, but this has never been done. Instead document which parts of
the paint affect the bounds.
Change-Id: I48376f08e8a6a47b7ea949c53523b47bb66b4aa4
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/334052
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
Previously, `checkRealloc` would always size up the requested buffer to
allow for 50% extra growth. In some cases (e.g. repeated push_back),
this is a clear win for performance. In other cases (e.g. assigning one
array to another, reserve_back), this extra padding is typically
unwanted and goes against most caller's expectations.
Change-Id: I2d2b5cf81268026822dc5ea08396771bbf06b25a
Bug: skia:10930
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/333797
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
This reverts commit 7712db9c24.
Reason for revert: blink unittests and maybe vulkan+skiarenderer masks appear broken. The blink unittests had actually failed with original CL, but was missed because of focus on Android. Not sure what's going on yet.
Original change's description:
> Reland "Draw image filters directly under non-axis-aligned transforms"
>
> This reverts commit 6cafdc069b.
>
> Reason for revert: Fixes unit test failure in Android
>
> In the original version, this internalSaveLayer() returned early if the
> strategy was kNoLayer. This diverged from the old code that updated the
> canvas' clip bounds and then returned before making the layer. A comment
> had suggested this was maybe okay to switch to this early out, but it
> turns out that's not the case.
>
> In Android's unit tests, it queries the clip bounds on a recording canvas
> which always uses a no-layer strategy. However, we do need to set the
> clip bounds of these types of canvas' (or virtual wrappers of a real
> canvas) so that they stay consistent with a real canvas.
>
> The unit tests had two failures, first the bounds and second a color
> mismatch after reading back. However, the bounds test was an ASSERT_EQ
> inside an SkDrawable function. ASSERT_EQ aborts the current function, so
> it never ran the drawRect that sets the color to green. The later
> readback is outside the drawable function, so that test still happened
> and failed. The only real issue to fix is the clip bounds tracking; once
> that unit test succeeds, the color readback will work properly.
>
> Original change's description:
> > Revert "Draw image filters directly under non-axis-aligned transforms"
> >
> > This reverts commit f8f23b2030.
> >
> > Reason for revert: b/172617382 is creating issues for Android's Webview
> >
> > Original change's description:
> > > Draw image filters directly under non-axis-aligned transforms
> > >
> > > This removes hacking the canvas CTM and wrapping the paint's image
> > > filter in a special MatrixTransform that computed a post-transform
> > > instead of its documented pre-transform effect. Performance-wise, the
> > > computed layer sizes should be about the same, but we avoid one less
> > > render target switch because we apply the transformation while drawing
> > > to the dst device, vs. transforming into another temporary layer and
> > > then drawing that to the dst device.
> > >
> > > Several important changes in behavior here:
> > > 1. The DeviceCM record no longer has a stashed matrix to restore and
> > > holds its restoration paint directly.
> > > 2. Devices for image filter inputs can now have device-to-global
> > > transforms that are not integer translates.
> > > 3. The MatrixTransform hack punted when there was perspective because it
> > > could produce excessively large temporary images, but the new version
> > > appears to work around that. We now impose a maximum layer size to
> > > protect against that and automatically scale the layer to prevent it.
> > > Perspective image filters otherwise now draw correctly.
> > > 6. Updated layer sizing code to use the new image filter APIs
> > > 7. Updated backdrop filter and restore filters to go through the same
> > > code paths, although restore filters skip the intermediate image
> > > transform.
> > > - layer bounds and transforms now go through the updated skif API
> > > and is hopefully more straight forward to understand.
> > > 8. Now we can optimize root color filter nodes of a filter DAG, even if
> > > the entire DAG can't be represented as a color filter. The last node
> > > is pulled off and composed with the restoration paint instead.
> > >
> > > Bug: skia:9074,skia:9283
> > > Change-Id: I1fa1d50135b9d6d453b02f89aa3cc3b54deab678
> > > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/328376
> > > Commit-Queue: Michael Ludwig <michaelludwig@google.com>
> > > Reviewed-by: Brian Salomon <bsalomon@google.com>
> >
> > TBR=bsalomon@google.com,robertphillips@google.com,fmalita@google.com,reed@google.com,michaelludwig@google.com
> >
> > Change-Id: I098d0e4b8ee067b436400eb9fea047e629544eec
> > No-Presubmit: true
> > No-Tree-Checks: true
> > No-Try: true
> > Bug: skia:9074
> > Bug: skia:9283
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/332737
> > Reviewed-by: Michael Ludwig <michaelludwig@google.com>
> > Reviewed-by: Derek Sollenberger <djsollen@google.com>
> > Commit-Queue: Michael Ludwig <michaelludwig@google.com>
>
> TBR=djsollen@google.com,bsalomon@google.com,robertphillips@google.com,fmalita@google.com,reed@google.com,michaelludwig@google.com
>
> # Not skipping CQ checks because original CL landed > 1 day ago.
>
> Bug: skia:9074
> Bug: skia:9283
> Change-Id: Ifd5fed708d05a64ddccbd096fbf29896a44ef9f5
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/333123
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Reviewed-by: Michael Ludwig <michaelludwig@google.com>
> Commit-Queue: Michael Ludwig <michaelludwig@google.com>
TBR=djsollen@google.com,bsalomon@google.com,robertphillips@google.com,fmalita@google.com,reed@google.com,michaelludwig@google.com
Change-Id: I7758641e0279ab5af44794d70cd381bc0a69f956
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:9074
Bug: skia:9283
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/333756
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
This reverts commit 6cafdc069b.
Reason for revert: Fixes unit test failure in Android
In the original version, this internalSaveLayer() returned early if the
strategy was kNoLayer. This diverged from the old code that updated the
canvas' clip bounds and then returned before making the layer. A comment
had suggested this was maybe okay to switch to this early out, but it
turns out that's not the case.
In Android's unit tests, it queries the clip bounds on a recording canvas
which always uses a no-layer strategy. However, we do need to set the
clip bounds of these types of canvas' (or virtual wrappers of a real
canvas) so that they stay consistent with a real canvas.
The unit tests had two failures, first the bounds and second a color
mismatch after reading back. However, the bounds test was an ASSERT_EQ
inside an SkDrawable function. ASSERT_EQ aborts the current function, so
it never ran the drawRect that sets the color to green. The later
readback is outside the drawable function, so that test still happened
and failed. The only real issue to fix is the clip bounds tracking; once
that unit test succeeds, the color readback will work properly.
Original change's description:
> Revert "Draw image filters directly under non-axis-aligned transforms"
>
> This reverts commit f8f23b2030.
>
> Reason for revert: b/172617382 is creating issues for Android's Webview
>
> Original change's description:
> > Draw image filters directly under non-axis-aligned transforms
> >
> > This removes hacking the canvas CTM and wrapping the paint's image
> > filter in a special MatrixTransform that computed a post-transform
> > instead of its documented pre-transform effect. Performance-wise, the
> > computed layer sizes should be about the same, but we avoid one less
> > render target switch because we apply the transformation while drawing
> > to the dst device, vs. transforming into another temporary layer and
> > then drawing that to the dst device.
> >
> > Several important changes in behavior here:
> > 1. The DeviceCM record no longer has a stashed matrix to restore and
> > holds its restoration paint directly.
> > 2. Devices for image filter inputs can now have device-to-global
> > transforms that are not integer translates.
> > 3. The MatrixTransform hack punted when there was perspective because it
> > could produce excessively large temporary images, but the new version
> > appears to work around that. We now impose a maximum layer size to
> > protect against that and automatically scale the layer to prevent it.
> > Perspective image filters otherwise now draw correctly.
> > 6. Updated layer sizing code to use the new image filter APIs
> > 7. Updated backdrop filter and restore filters to go through the same
> > code paths, although restore filters skip the intermediate image
> > transform.
> > - layer bounds and transforms now go through the updated skif API
> > and is hopefully more straight forward to understand.
> > 8. Now we can optimize root color filter nodes of a filter DAG, even if
> > the entire DAG can't be represented as a color filter. The last node
> > is pulled off and composed with the restoration paint instead.
> >
> > Bug: skia:9074,skia:9283
> > Change-Id: I1fa1d50135b9d6d453b02f89aa3cc3b54deab678
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/328376
> > Commit-Queue: Michael Ludwig <michaelludwig@google.com>
> > Reviewed-by: Brian Salomon <bsalomon@google.com>
>
> TBR=bsalomon@google.com,robertphillips@google.com,fmalita@google.com,reed@google.com,michaelludwig@google.com
>
> Change-Id: I098d0e4b8ee067b436400eb9fea047e629544eec
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Bug: skia:9074
> Bug: skia:9283
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/332737
> Reviewed-by: Michael Ludwig <michaelludwig@google.com>
> Reviewed-by: Derek Sollenberger <djsollen@google.com>
> Commit-Queue: Michael Ludwig <michaelludwig@google.com>
TBR=djsollen@google.com,bsalomon@google.com,robertphillips@google.com,fmalita@google.com,reed@google.com,michaelludwig@google.com
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: skia:9074
Bug: skia:9283
Change-Id: Ifd5fed708d05a64ddccbd096fbf29896a44ef9f5
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/333123
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
This isn't hooked up anywhere but breaks up the omnibus CL.
Change-Id: I15c200e57450e7cc8ee95a3f7969926d0eb8487f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/333129
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Remove done and release distinction. Chrome is not using either as
it tracks texture access using other synchronization mechanisms
(semaphores, flush finish procs). Now there is just fulfill and release
where release is called when the texture can be deleted. Also,
release proc can be null.
Simplify texture idle mechanism as the "flushed" state was only used to
implement the old idea of a release proc. The "finished" idle state is
still used to implement the new release proc. Though, it could also be
removed if GrTexture were to be removed for textures returned by fulfill.
Not directly tied to this bug, but a new YUVA factory will be required
and it's good to clean things up first to avoid adding another
instance of the current complexity.
Bug: skia:10632
Change-Id: I4fe3c0af3f5a591506b1b3c736fd3284a38465a6
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/331836
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Lots of this stuff can be delegated to each other,
cutting the protected SkTArray constructors to two.
Change-Id: Ie35b7a5ceb0ffef5a9548afccc546e076bd668cc
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/333256
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
This decreases alignment for things like float
and increases alignment for things like __m128.
The other users of SkAlignedSStorage looked simple enough to port to
aligned char[]. I haven't changed either of their alignments---still
the old max(void*,double)---but we can now if we want.
All that together lets us delete SkAlignedSStorage.
Change-Id: I6b5957a26f42ad859de383054573fb58d5cd0576
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/333196
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Using private inheritance is similar to having a class member,
except it's initialized before the next base class, SkTArray.
This lets us pass it to SkTArray's constructors.
I think we can make related changes (updating the various SkAlignedFoo,
not using them here, or not using them anywhere) independently.
... storage constructors made explicit at suggestion of GCC's -Wextra.
... now with explicit static_cast<STORAGE*>(this)
Change-Id: I665cf840e111da68f039416c9649ce328cc308d6
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/333146
Reviewed-by: John Stiles <johnstiles@google.com>
Especially while I'm fiddling with the implementation, we don't
want the user to be surprised when using DDLs also triggers
this other codepath.
Bug: skia:10877
Change-Id: I660ea08189fff45acd7a45df12e15c45f607758a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/332720
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Auto-Submit: Adlai Holler <adlai@google.com>
In addition, place all the subruns, and helpers in
an anonymous namespace. Add helper has_some_antialiasing.
Change-Id: Iee7dc24f7e568e2bace03ee00c1c98dbf3050634
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/332744
Reviewed-by: Robert Phillips <robertphillips@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Experimenting with a single struct for everything, to simplify the
number of API changes/additions needed.
e.g. makeShader(...)
Idea is to use SkSampleOptions to augment drawBitmap calls, so we can
remove SkFilterQuality enum from SkPaint.
Change-Id: I9045ff483f58af29148d7dc21d30b294c4a718a1
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/332739
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Mike Reed <reed@google.com>
This simplifies our world a little bit.
Bug: skia:10877
Change-Id: I2fb27cd53e9fda0f279c046f6eaa50fd02774e72
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/332604
Commit-Queue: Robert Phillips <robertphillips@google.com>
Auto-Submit: Adlai Holler <adlai@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
This reverts commit f8f23b2030.
Reason for revert: b/172617382 is creating issues for Android's Webview
Original change's description:
> Draw image filters directly under non-axis-aligned transforms
>
> This removes hacking the canvas CTM and wrapping the paint's image
> filter in a special MatrixTransform that computed a post-transform
> instead of its documented pre-transform effect. Performance-wise, the
> computed layer sizes should be about the same, but we avoid one less
> render target switch because we apply the transformation while drawing
> to the dst device, vs. transforming into another temporary layer and
> then drawing that to the dst device.
>
> Several important changes in behavior here:
> 1. The DeviceCM record no longer has a stashed matrix to restore and
> holds its restoration paint directly.
> 2. Devices for image filter inputs can now have device-to-global
> transforms that are not integer translates.
> 3. The MatrixTransform hack punted when there was perspective because it
> could produce excessively large temporary images, but the new version
> appears to work around that. We now impose a maximum layer size to
> protect against that and automatically scale the layer to prevent it.
> Perspective image filters otherwise now draw correctly.
> 6. Updated layer sizing code to use the new image filter APIs
> 7. Updated backdrop filter and restore filters to go through the same
> code paths, although restore filters skip the intermediate image
> transform.
> - layer bounds and transforms now go through the updated skif API
> and is hopefully more straight forward to understand.
> 8. Now we can optimize root color filter nodes of a filter DAG, even if
> the entire DAG can't be represented as a color filter. The last node
> is pulled off and composed with the restoration paint instead.
>
> Bug: skia:9074,skia:9283
> Change-Id: I1fa1d50135b9d6d453b02f89aa3cc3b54deab678
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/328376
> Commit-Queue: Michael Ludwig <michaelludwig@google.com>
> Reviewed-by: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com,robertphillips@google.com,fmalita@google.com,reed@google.com,michaelludwig@google.com
Change-Id: I098d0e4b8ee067b436400eb9fea047e629544eec
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:9074
Bug: skia:9283
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/332737
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
This removes hacking the canvas CTM and wrapping the paint's image
filter in a special MatrixTransform that computed a post-transform
instead of its documented pre-transform effect. Performance-wise, the
computed layer sizes should be about the same, but we avoid one less
render target switch because we apply the transformation while drawing
to the dst device, vs. transforming into another temporary layer and
then drawing that to the dst device.
Several important changes in behavior here:
1. The DeviceCM record no longer has a stashed matrix to restore and
holds its restoration paint directly.
2. Devices for image filter inputs can now have device-to-global
transforms that are not integer translates.
3. The MatrixTransform hack punted when there was perspective because it
could produce excessively large temporary images, but the new version
appears to work around that. We now impose a maximum layer size to
protect against that and automatically scale the layer to prevent it.
Perspective image filters otherwise now draw correctly.
6. Updated layer sizing code to use the new image filter APIs
7. Updated backdrop filter and restore filters to go through the same
code paths, although restore filters skip the intermediate image
transform.
- layer bounds and transforms now go through the updated skif API
and is hopefully more straight forward to understand.
8. Now we can optimize root color filter nodes of a filter DAG, even if
the entire DAG can't be represented as a color filter. The last node
is pulled off and composed with the restoration paint instead.
Bug: skia:9074,skia:9283
Change-Id: I1fa1d50135b9d6d453b02f89aa3cc3b54deab678
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/328376
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
This ties the caps to the compiler instance, paving the way for
pre-optimizing the shared code. Most of the time, the compiler is
created and owned the GPU instance, so this is fine. For runtime
effects, we now use the shared (device-agnostic) compiler instance
for the first compile, even on GPU. It's configured with caps that
apply no workarounds. We pass the user's SkSL to the backend as
cleanly as possible, and then apply any workarounds once it's part
of the full program.
Bug: skia:10905
Bug: skia:10868
Change-Id: Ifcf8d7ebda5d43ad8e180f06700a261811da83de
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/331493
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
f01a9d9020
is the culprit
Revert "GrRefCntedCallback has Make function."
This reverts commit b2c42140ea.
Revert "Add SkImage::MakeFromYUVATexturesCopyToExternal"
This reverts commit f01a9d9020.
Bug: skia:10632
Change-Id: Ief076f168b63ff8ca15b607163a13d5f52a733d2
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/331798
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit 28eb592735.
Reason for revert: std::optional use is breaking bots, e.g.:
https://ci.chromium.org/raw/build/logs.chromium.org/skia/4fa8175011a1c411/+/annotations
Original change's description:
> Reland "heif: Add AVIF type and AVIF sniffing"
>
> This is a reland of 3ab5b73649
>
> Fix: Chromium does not use the heif decoder. So hide it behind
> an ifdef.
>
> Original change's description:
> > heif: Add AVIF type and AVIF sniffing
> >
> > AVIF is the image format based on the AV1 video codec. The
> > container for AVIF is very similar to that of HEIF. Add type
> > definitions for AVIF and sniffing code for detecting AVIF images.
> >
> > The underlying android platform's HEIF decoder implementation will
> > also support AVIF decoding.
> >
> > Bug: b/141654151
> > Change-Id: I7e31f4cedf0bffb8920ddf880a26601e48d0e833
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/330059
> > Reviewed-by: Leon Scroggins <scroggo@google.com>
> > Reviewed-by: Derek Sollenberger <djsollen@google.com>
> > Reviewed-by: Chong Zhang <chz@google.com>
> > Commit-Queue: Leon Scroggins <scroggo@google.com>
>
> Bug: b/141654151
> Change-Id: Ie6840d6fc97789be619924fc60df8683cd58430f
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/331496
> Reviewed-by: Derek Sollenberger <djsollen@google.com>
> Reviewed-by: Leon Scroggins <scroggo@google.com>
> Commit-Queue: Leon Scroggins <scroggo@google.com>
TBR=djsollen@google.com,scroggo@google.com,chz@google.com,vigneshv@google.com
Change-Id: I25df9f65b9d56d81be70a5fa650c3d841bd5a15e
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: b/141654151
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/331800
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This is a reland of 3ab5b73649
Fix: Chromium does not use the heif decoder. So hide it behind
an ifdef.
Original change's description:
> heif: Add AVIF type and AVIF sniffing
>
> AVIF is the image format based on the AV1 video codec. The
> container for AVIF is very similar to that of HEIF. Add type
> definitions for AVIF and sniffing code for detecting AVIF images.
>
> The underlying android platform's HEIF decoder implementation will
> also support AVIF decoding.
>
> Bug: b/141654151
> Change-Id: I7e31f4cedf0bffb8920ddf880a26601e48d0e833
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/330059
> Reviewed-by: Leon Scroggins <scroggo@google.com>
> Reviewed-by: Derek Sollenberger <djsollen@google.com>
> Reviewed-by: Chong Zhang <chz@google.com>
> Commit-Queue: Leon Scroggins <scroggo@google.com>
Bug: b/141654151
Change-Id: Ie6840d6fc97789be619924fc60df8683cd58430f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/331496
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
Each caller does not need to check for null function.
Also inherit from SkNVRefCnt.
Change-Id: I9a53c3c8e9dec1361db6cfb21b97d178173b23ac
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/331490
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Updated API for creating a RGBA texture-backed image from RGBA texture
planes with user-provided backing store using GrYUVABackendTextures.
Ultimately we would like to remove all such APIs and have the client
make a SkSurface and draw a YUVA texture image to the surface but
a recent attempt to do that in Chrome caused a not yet understood
perf regression.
Add wacky_yuv_formats variation that tests new api.
Bug: skia:10632
Change-Id: I89411216948682f13281a91a7575d5f345badda7
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/329956
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
This reverts commit 3ab5b73649.
Reason for revert: <optional> header is C++17 only
Original change's description:
> heif: Add AVIF type and AVIF sniffing
>
> AVIF is the image format based on the AV1 video codec. The
> container for AVIF is very similar to that of HEIF. Add type
> definitions for AVIF and sniffing code for detecting AVIF images.
>
> The underlying android platform's HEIF decoder implementation will
> also support AVIF decoding.
>
> Bug: b/141654151
> Change-Id: I7e31f4cedf0bffb8920ddf880a26601e48d0e833
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/330059
> Reviewed-by: Leon Scroggins <scroggo@google.com>
> Reviewed-by: Derek Sollenberger <djsollen@google.com>
> Reviewed-by: Chong Zhang <chz@google.com>
> Commit-Queue: Leon Scroggins <scroggo@google.com>
TBR=djsollen@google.com,scroggo@google.com,chz@google.com,vigneshv@google.com
Change-Id: I9c9cd00af1a41bffa37725f39afc9bc0e504d616
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: b/141654151
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/331336
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
AVIF is the image format based on the AV1 video codec. The
container for AVIF is very similar to that of HEIF. Add type
definitions for AVIF and sniffing code for detecting AVIF images.
The underlying android platform's HEIF decoder implementation will
also support AVIF decoding.
Bug: b/141654151
Change-Id: I7e31f4cedf0bffb8920ddf880a26601e48d0e833
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/330059
Reviewed-by: Leon Scroggins <scroggo@google.com>
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Reviewed-by: Chong Zhang <chz@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
Motivated by investigating
https://skia-review.googlesource.com/c/skia/+/330696
This CL does not fix anything, but is meant to better document
the current behavior.
Change-Id: I62b8cbfb39e05404f0f5303f024e1f56fc32b7e5
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/330937
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Reviewed-by: Tyler Denniston <tdenniston@google.com>
Also added unit tests for each of SkTArray's various constructors, and
added `SkTArray::value_type` which allows calling code to refer to the
array's value-type. These unit tests exposed some preexisting strict-
aliasing issues in SkSTArray when compiled on GCC 6+ with optimizations
enabled, which are being investigated separately at skia:10891.
Change-Id: Ia0fb18830cfbbdcb1545fe7f7ac51d8e768a3f94
Bug: skia:10891
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/330279
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Bug: skia:9585
Change-Id: I1fefd3598478d2f2c157d3a91750b5b92479b1b2
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/330278
Commit-Queue: Mike Reed <reed@google.com>
Auto-Submit: Mike Klein <mtklein@google.com>
Reviewed-by: Mike Reed <reed@google.com>
We track the total amount of memory allocated and the percentage of the
allocated memory that is used.
Bug: skia:10871
Change-Id: I4aa120a3545d215cf42430aa6a73e924118f1dbc
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/329963
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
With the addition of vertex data to the thread safe cache we also have
to handle the case where a given SkPath becomes inaccessible and
proactively invalidate the matching entry.
Bug: 1108408
Change-Id: Id11ce2aa10517f7c0772a253634d3c0d13e13460
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/330261
Reviewed-by: Adlai Holler <adlai@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This reverts commit 375721d7bb.
Some manual edits needed due to time elapsed.
Bug: chromium:1141332, skia:10566
Change-Id: Iadb15d3f5334d9eed4e7053e9c19d75a0bbeb9de
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/330196
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Change-Id: I93fdeaa3ea6be73619f82859bb53aa88fae3262b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/329962
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Herb Derby <herb@google.com>
This uma stat can allow us to look a few different things. First we can
look at the distribution of render passes per submit (including mean,
median, ect.). Additionally we can do things like sum the total number
of renderpasses from all submits and divide by the total number of
frames (Compositing.Display.DrawToSwapUs::TotalCount) to get the
average number of render passes per frame and not just submit.
Technically under the hood the ENUMERATION and LINEAR_EXACT macros will
do the same thing and we could just use ENUMERATION here. However to
match how chrome uses their UMA macros it is more correct to use the
LINEAR_EXACT since we aren't counting enum values. Chromes macros
actually have static asserts the values are or are not enums, but the
skia implementations do not.
Includes some minor updates to names to match chromes UMA macro values.
This still requires the chrome implementation of the new macro.
Bug: skia:10871
Change-Id: Idbc4d2fc649bbdefd0952a002c3327cb700b552b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/329776
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Adlai Holler <adlai@google.com>
Adds an SkChopCubicAt overload that performs two chops at once in
SIMD. Also updates SkChopCubicAt to accept T values of 0 and 1. This
has been the source of bugs in the past.
Bug: skia:10419
Change-Id: Ic8a482a69192fb1685f3766411cbdceed830f9b7
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/327436
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Bug: skia:10866
Change-Id: I06c675a423380d30017ebcc5485d556211d403fa
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/329390
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Auto-Submit: Mike Klein <mtklein@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
This removes the last of the SkFontHost LCD globals and the
SkSurfaceProps::kLegacyFontHost_InitType.
Bug: skia:3934
Change-Id: Ic2342a3ea3dbcd075d6817cbd3fc27274e376b8d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/329364
Commit-Queue: Ben Wagner <bungeman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
This is everything except for literally removing the class.
Change-Id: I2f16caf865d1bcf9c0f267aed73313c0676a73bb
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/327222
Commit-Queue: Adlai Holler <adlai@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
This is desired for a short term memory improvement on low memory
devices.
Bug: chromium:1138979
Change-Id: I7df41a9c4d21b7a7f62b738e6358b36dd262f77d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/327345
Commit-Queue: Kyle Charbonneau <kylechar@chromium.org>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
This reverts commit fea12238ed.
Reason for revert: MSAN/SwiftShader failure
Original change's description:
> New variant of SkImage::MakeFromYUVATextures.
>
> Takes a new type GrYUVATextures. This a set of GrBackendTextures and
> SkYUVAInfo that have been pre-validated to be compatible.
>
> Bug: skia:10632
>
> Change-Id: Id252f8662ede0f268e88fd40dc1b0b8f4ab6345f
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317762
> Commit-Queue: Brian Salomon <bsalomon@google.com>
> Reviewed-by: Jim Van Verth <jvanverth@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
TBR=jvanverth@google.com,bsalomon@google.com,robertphillips@google.com
Change-Id: I5350d4f9b1eda0503fb0af9db8575a734bdc811f
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:10632
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/327922
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
It's just much easier to remember and think about
max(lo, min(x, hi)) than max(min(hi, x), lo), and
both pin NaN to one of the two limits. I'm not sure
if anything in Skia depends on which limit we pin to.
Change-Id: Iceca36a8fffd7072180e82b8b6eb81cbdb5ac97f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/327788
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Auto-Submit: Mike Klein <mtklein@google.com>
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Takes a new type GrYUVATextures. This a set of GrBackendTextures and
SkYUVAInfo that have been pre-validated to be compatible.
Bug: skia:10632
Change-Id: Id252f8662ede0f268e88fd40dc1b0b8f4ab6345f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317762
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Change-Id: I70b2fdea570a9091afc81a1455fa61f90b0357a1
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/327786
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
- Reword the comment to explain how it differs from std::clamp().
- Document and test an alternative form using std::{min,max}.
Change-Id: I3a97b98a15303478a5a7ff8d0536829f6d5f1586
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/327696
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
This reverts commit db0288d747.
Reason for revert: undeclared tuple size
Original change's description:
> Move all YUVA image creation in GMs into sk_gpu_test::LazyYUVImage.
>
> LazyYUVImage now supports making images from a generator and from
> textures. It uses ManagedBackendTexture to manage texture plane
> lifetime via ref-counting.
>
> Adds some supporting utility functions to SkYUVAInfo and
> SkYUVAPixmaps.
>
> Eases transition of forthcoming MakeFromYUVATextures API change.
>
> Bug: skia:10632
>
> Change-Id: I8cfd747c27076d1627da6ea8a169e554a96049e0
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/326720
> Reviewed-by: Robert Phillips <robertphillips@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com,robertphillips@google.com
Change-Id: Icdfb70f7dadd97eace8f88d5a886d31534102f5f
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:10632
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/327622
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
LazyYUVImage now supports making images from a generator and from
textures. It uses ManagedBackendTexture to manage texture plane
lifetime via ref-counting.
Adds some supporting utility functions to SkYUVAInfo and
SkYUVAPixmaps.
Eases transition of forthcoming MakeFromYUVATextures API change.
Bug: skia:10632
Change-Id: I8cfd747c27076d1627da6ea8a169e554a96049e0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/326720
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Step one is to make it private -- only skottie needs it at the moment
Stpe two is to modify pathops to use builders, and then we can likely
remove it shrinkToFit entirely (since builder.snapshot() is already snug).
bug: skia:9000
Change-Id: I9126bcb6fc2094fbeede2acb1f211b0ab771feba
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/327341
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Mike Reed <reed@google.com>
The semantics of `vector::reserve` and `SkTArray::reserve` were not the
same. SkTArray::reserve takes a delta over the current array size,
whereas vector takes a total array size. This could lead to subtle
errors with over- or under-reservation, hurting performance.
This CL renames `SkTArray::reserve` to `SkTArray::reserve_back` to give
the SkTArray behavior a distinct (hopefully easily understandable) name,
leaving its functionality as-is.
Change-Id: Icbd3114bb317fd5f307f393c02ae6fb6f83764e9
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/326956
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
When we shrink a path, we might relocate its underlying arrays.
Doing so would invalidate any outstanding Iterators. The caller must
handle this for its path object, but there may be copies elsewhere,
which have just ref'd the underlying arrays. To keep these copys'
iterators alive, we defensively "copy-on-write", so as to not relocate
their buffers.
Incidentally, update SkContourMeasureIter's constructor to clarify that
it is iterating through its copy of the path, and not the original.
Change-Id: I5c9331ab36ac8e156218532478f6d7105fd97cdc
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/326438
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Mike Reed <reed@google.com>
Instead of looking at point/verb/weight counts, add an
SkPathRef::approximateBytesUsed() using their reserve counts.
This shows SkPathBuilder::snapshot() can return more memory-efficient
SkPaths than SkPathBuilder::detach(), at the cost of a copy.
Change-Id: I4e208c41643480d7682daba6ac674ffa63c74de2
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/326608
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Mike Klein <mtklein@google.com>
Now that we have skvx::map(), anyone can write this sort of
scalar-to-vector code. There are no vector instructions for these, so
they'll never going to be particularly interesting for SkVx to provide.
We did work out _approximate_ versions of each of these for SkVM, and
that's what we use to evaluate these programs there. So if this stuff
really matters we could port that logic back over to SkVx.h.
But in terms of pure refactoring, I think this is where we want to sit
until we decide to use those approximations. I don't really want to
invest much time in the SkSLByteCode interpreter any more.
Change-Id: I4e595dee5fd9e608905305e46b2aebcab986c561
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/326277
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Cq-Include-Trybots: luci.chromium.try:linux_chromium_cfi_rel_ng
Bug: chromium:1137652, chromium:1137958
Change-Id: I8575b588f9a1ba89740b95382b2462338e34bec5
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/326478
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Cut & paste with some reorganization of includes & forward-decls.
Next up is GrContextPriv.
Change-Id: I72d2d95c62692e3b37608517b796c0041ffedea3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/326157
Reviewed-by: Robert Phillips <robertphillips@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Adlai Holler <adlai@google.com>
This is a reland of b3c42efd25
with a few more signed/unsigned mismatches fixed up.
Original change's description:
> pack SkTArray
>
> Same idea as http://review.skia.org/325857; I just wanted to feel out
> the options myself. A couple key ideas:
>
> Prefer SkTo32() to separate range assertions and casts.
>
> Keep using int indices, counting to this->count() where
> fCount would have warned about signed/unsigned mismatch.
>
> I've kept new comments and assertions to minimum. In the end we won't
> change the max size of SkTArray, and I don't see much need to call out
> how much it hasn't changed. Reading back over the accumulated changes,
> I don't really see much that's newly error-prone.
>
> Change-Id: I86a8a161b9ae44f24fc25093741945b75fbfa770
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/326106
> Commit-Queue: Mike Klein <mtklein@google.com>
> Reviewed-by: John Stiles <johnstiles@google.com>
Change-Id: I04d928ecc185fb5c7b9d32f60e94df9f8d137898
Cq-Include-Trybots: luci.skia.skia.primary:Build-Win-MSVC-x86_64-Debug-Vulkan,Build-Win-MSVC-x86-Debug
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/326297
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
Cut & paste job, but I did replace some cases of just calling
inherited implementations with using-statements. There are
other methods on this class that are using-statements and
that pattern is cleaner.
Change-Id: Ie369c643e44bdb8f82dfffcf45c1f65d48606899
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/325660
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Auto-Submit: Adlai Holler <adlai@google.com>
This reverts commit b3c42efd25.
Reason for revert: Build-Win-MSVC-x86_64-Debug-Vulkan
Original change's description:
> pack SkTArray
>
> Same idea as http://review.skia.org/325857; I just wanted to feel out
> the options myself. A couple key ideas:
>
> Prefer SkTo32() to separate range assertions and casts.
>
> Keep using int indices, counting to this->count() where
> fCount would have warned about signed/unsigned mismatch.
>
> I've kept new comments and assertions to minimum. In the end we won't
> change the max size of SkTArray, and I don't see much need to call out
> how much it hasn't changed. Reading back over the accumulated changes,
> I don't really see much that's newly error-prone.
>
> Change-Id: I86a8a161b9ae44f24fc25093741945b75fbfa770
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/326106
> Commit-Queue: Mike Klein <mtklein@google.com>
> Reviewed-by: John Stiles <johnstiles@google.com>
TBR=mtklein@google.com,johnstiles@google.com
Change-Id: I8267a05e1ce075bfa7893c60f7c77dbf4f8cf061
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/326296
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
These don't return reliable portable results, so I don't want to promote
them as good ideas to use. You can get at least 5 different results
from these across the four main architectures we support, and they've
been the root cause of bugs uncovered only in production on undertested
platforms.
Luckily, unused outside of tests.
Change-Id: I532731fe4cddf127253341e5ace8d9c5c9ebb0f1
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/326108
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Same idea as http://review.skia.org/325857; I just wanted to feel out
the options myself. A couple key ideas:
Prefer SkTo32() to separate range assertions and casts.
Keep using int indices, counting to this->count() where
fCount would have warned about signed/unsigned mismatch.
I've kept new comments and assertions to minimum. In the end we won't
change the max size of SkTArray, and I don't see much need to call out
how much it hasn't changed. Reading back over the accumulated changes,
I don't really see much that's newly error-prone.
Change-Id: I86a8a161b9ae44f24fc25093741945b75fbfa770
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/326106
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
The original SkIRect* crop rect argument was a little too onerous.
First, as a pointer, it required you to declare your crop rect separately
just to take a pointer to it. Now, you can pass an SkIRect or SkRect in
directly when you are explicitly constructing a cropped filter.
Second, the crop rect is transformed by the same matrix as the other
filter parameters, so it can be scaled and translated. Allowing SkRect
instead of just SkIRect gives more precision and flexibility for local
coordinate systems. Now a crop rect could be defined to be from [-.5, .5]
and still map to real pixels after transformation (this was a request
from the skia-discuss mailing list, and also better matches the SVG spec).
The crop rect argument was always meant to be a convenience, since I
plan to refactor cropping into an indenendent image filter that will
give more explicit control over when the crop is applied in the DAG.
To maintain the convenience for the factories, the constructors of
the new CropRect type are not explicit so that callers don't ever need
to concern themselves with it.
Bug: skia:9296
Change-Id: I29a684cb925f1fca4dabc803114ab2b125660aaa
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/324622
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
This basically adds the functionality to GrResourceProvider to handle
scrate MSAA attachments. There are not current users of this, but
users will be added in follow on changes.
Bug: skia:10727
Change-Id: Ieb8d247e034fb22ac9ff4fc549935310329a1c1e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/320267
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Just a little refactor no-op.
Change-Id: I1842a0190cd96c60da2fe3c7f88fa56c9f73af81
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/325681
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Rewrite map() to allow any number of arguments,
now also used for 2-argument (pow) and 3-argument (fma) operations.
I left a note about fma()... I can't understand why, but calling as
map(fmaf, x,y,z) ends up with scalar calls to fmaf(), but with the
lambda indirection we see perfect vector codegen.
I had to break map() back into two parts. I don't see any way to pass
both a variadic number of arguments and play our trick with the default
std::index_sequence parameter. The lane lambda similarly exists only to
split up the expansion of the Rest... type pack from the I... index
pack; you can't use two pack expansions in the same expression.
Change-Id: Ia156a7fd846237f687d6018a7f95550c9fd4a56d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/325736
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Herb Derby <herb@google.com>
A change made in the spirit of not being weird. C++ containers typically
expose their capacities to non-test code, with a function "capacity."
Change-Id: Icc7e175a20aff53ef9e144ac9620ced29ef5e95a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/325657
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
The call order here is a little weird – it could use some refactoring
but for now it's just a cut-and-paste job.
Change-Id: I931493a421f7fd1df69f0c47055b90a2996c7dc3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/325459
Reviewed-by: Robert Phillips <robertphillips@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Commit-Queue: Adlai Holler <adlai@google.com>
Auto-Submit: Adlai Holler <adlai@google.com>
This is pretty much just cutting & pasting the code naïvely,
but it's the safe way to go so that we don't impact the
order of events during this housekeeping.
Change-Id: I8d9f2ffb560b34fd1a8d9603174ff1f17803e447
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/324619
Commit-Queue: Adlai Holler <adlai@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Auto-Submit: Adlai Holler <adlai@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
SkImageFilters::Paint did not use every slot of the SkPaint, with only
its color, alpha, color filter, and shader having a meaningful effect on
the image filter result. It was always blended into a transparent dst,
so blend mode wasn't very relevant, and it was always filled to whatever
required geometry, so stroke style, path effect, and mask filters were
ignored or not well specified.
Color, alpha, and color filter can all be combined into an SkShader, so
a more constrained SkImageFilters::Shader provides the same useful
capabilities without as many surprises.
SkImageFilters::Paint still exists, but is deprecated to be removed
once I've confirmed clients aren't depending on it.
Bug: skia:9310
Change-Id: I11a82bda1a5d440726cf4e2b5bfaae4929568679
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/323680
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
This reverts commit 48d8724097.
Reason for revert: Breaking MSVC bots
Original change's description:
> Merge GrContext::init into GrDirectContext ...
>
> And minor cleanups associated with the initialization of these classes.
>
> Change-Id: Ida0372d0b1a0b8bf5b309814de5418e47ea34fdb
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/324122
> Commit-Queue: Adlai Holler <adlai@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
> Auto-Submit: Adlai Holler <adlai@google.com>
TBR=robertphillips@google.com,adlai@google.com
Change-Id: I00b2ddaeaef53e3fe05a338c88158cf235f325c4
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/324132
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
And minor cleanups associated with the initialization of these classes.
Change-Id: Ida0372d0b1a0b8bf5b309814de5418e47ea34fdb
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/324122
Commit-Queue: Adlai Holler <adlai@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Auto-Submit: Adlai Holler <adlai@google.com>
Migration should be free because (1) the non-Android API is
only loosening up to GrRecordingContext and (2) the Android API
can only see GrContext through including GrDirectContext.h
Change-Id: I97aa75baba0b0969361db6eaef9f83ea94183700
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/323557
Commit-Queue: Adlai Holler <adlai@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Once triangulated paths are added this will no longer just be storing proxy views.
Bug: 1108408
Change-Id: I82fa47b0b85f738d9a25330c29bc2892c9bfeda4
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/323999
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Adlai Holler <adlai@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Like the destructors, most of these can just go unspoken.
SkTArray only knows its size in Debug builds, so it can't easily grow a
copy constructor. Instead just keep the explicit copies and moves on
SkTHashTable, and mark the others as explicitly default. I inverted the
pattern from assign-by-copy to copy-by-assign, but it's all basically
the same.
Change-Id: I0df552ef547ce9c7e232267c072a5f3b09197847
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/324056
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
This will enable us to use SkTHashMap to store our definition maps.
Change-Id: I6017dfa71e1c5e68a20c97e955bb3d3abf347f0d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/323891
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Currently there is nothing using these formats, but this change just adds
them along with a quaries about their properties. They will be used in a
follow up change.
Bug: skia:10727
Change-Id: Iaaf13baf372799d47c65bd974fd204a32be57617
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/322622
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
and begin using it for cached SW-generated blur masks.
This is needed to begin mixing and matching HW & SW-generated blur
masks since they have different draw-rects.
It will also be useful if/when we add support for triangulated paths
to the thread-safe cache.
Bug: 1108408
Change-Id: I085ad1127dc2deb98b35d704b06e50b27c72fd1c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/322657
Reviewed-by: Adlai Holler <adlai@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
I wrote code that called SkAutoTArray::data() and discovered that it
was broken, but not generating compile errors because it's part of a
template and never instantiated anywhere else. I fixed the
implementation and added it to our container unit test to prevent later
regression. This revealed another issue, that "containers in
SkTemplates.h [should] all have a consistent api", according to
test_container_apis. However, data() was never added to the non-array
container APIs. So I added data() to the other containers as well.
Change-Id: I52532c91fdab3fc8c4539053ba8420815b7b0ee5
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/323276
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Adds a new helper that creates a GrBackendRenderTarget using
GrGpu and then wraps it in a SkSurface. Uses the SkSurface
release proc to delete the BERT using GrGpu.
Upgrades GrGpu::createTestingOnlyBackendRenderTarget to create MSAA
buffers.
Updates many tests/tool to call sites to use the helper instead of
SkSurface::MakeFromBackendTextureAsRenderTarget.
Adds syncToCpu bool to SkSurface:: and GrContext::flushAndSubmit.
Bug: skia:9832
Change-Id: I73a8f0ce09dc6523729af0814464c6b6657fda06
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/293683
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Kevin Lubick <kjlubick@google.com>
When flattening we always flatten to kTopLeft.
Rename some origin params to SkImage factories to make it clearer
that they refer to input texture origins.
Only preserve the origin in the variants that immediately flatten
to RGBA as part of contract (make SkImage_Gpu not SkImage_GpuYUVA).
Bug: skia:10632
Change-Id: I0ed9d693758086c4050f983b579d0d77daefc3d7
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/322486
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This is a reland of c1916c34fe
As it turns out, benches are not always given a canvas.
Original change's description:
> Remove use of legacy display globals.
>
> In the ongoing effort to remove the display globals from Skia, allow
> their use only if SK_LEGACY_SURFACE_PROPS is defined. Do not define this
> in a normal Skia build and remove all use from Skia code.
>
> Change-Id: I9ff550f5db246b9024aac687a1bc01321f1be4c8
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/319343
> Reviewed-by: Herb Derby <herb@google.com>
> Commit-Queue: Ben Wagner <bungeman@google.com>
Change-Id: I61a2ac058fafc99653e3304876cf4b97350dac8b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/322490
Reviewed-by: Ben Wagner <bungeman@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
This reverts commit c1916c34fe.
Reason for revert: Bots unhappy
Original change's description:
> Remove use of legacy display globals.
>
> In the ongoing effort to remove the display globals from Skia, allow
> their use only if SK_LEGACY_SURFACE_PROPS is defined. Do not define this
> in a normal Skia build and remove all use from Skia code.
>
> Change-Id: I9ff550f5db246b9024aac687a1bc01321f1be4c8
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/319343
> Reviewed-by: Herb Derby <herb@google.com>
> Commit-Queue: Ben Wagner <bungeman@google.com>
TBR=djsollen@google.com,bungeman@google.com,herb@google.com,reed@google.com
Change-Id: I365d2b1d19241a90130bc1b59663651817966f63
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/322400
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
In the ongoing effort to remove the display globals from Skia, allow
their use only if SK_LEGACY_SURFACE_PROPS is defined. Do not define this
in a normal Skia build and remove all use from Skia code.
Change-Id: I9ff550f5db246b9024aac687a1bc01321f1be4c8
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/319343
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
This adds docs or stubs for everything that is on the main CanvasKit
object.
Paragraph, Particles, and Skottie will be their own CLs.
Bug: skia:10717
Change-Id: I0f5027d73b2ac7d127f3a03a8f1aaa15f694ae38
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/321789
Reviewed-by: Nathaniel Nifong <nifong@google.com>
This also includes matrices (which I'm reminded I want to test with
TypedArrays and make optional).
Bug: skia:10717
Change-Id: I0f6565a46b766c1f81c28dfc1229d403bff32e69
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/321118
Reviewed-by: Nathaniel Nifong <nifong@google.com>
Bug: skia:10632
Change-Id: Icb27e44d234063ab049fef95587f474323d7ada9
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/321537
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
This will allow us in a follow on change to put in a "fake" gl stencil
format for the wrapped FBO.
Bug: skia:10727
Change-Id: Iba1eca5114b34d25e6a220591d28a20f7b36b12b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/321545
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
The SkRasterClip on DeviceCM appears to be unused and just increased the
size of that struct. Now the clip is tracked on the MCRec or within
SkBitmapDevice itself.
This adjusts the reserved size for DeviceCM to match (as reported on my
machine), and moves it into an anonymous namespace.
Change-Id: Ifa8635f839fc3d75339a64c9378ee054fe0cc071
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/321250
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Instead of being passed separately.
Check sample count in various onWrap methods in GrMtlGpu.
Bug: skia:9832
Cq-Include-Trybots: luci.skia.skia.primary:Test-iOS-Clang-iPhone8-GPU-AppleA11-arm64-Release-All-Metal,Test-iOS-Clang-iPhone7-GPU-PowerVRGT7600-arm64-Release-All-Metal,Test-iOS-Clang-iPadPro-GPU-PowerVRGT7800-arm64-Release-All-Metal,Test-iOS-Clang-iPhone11-GPU-AppleA13-arm64-Release-All-Metal,Test-iOS-Clang-iPhone6-GPU-PowerVRGX6450-arm64-Release-All-Metal,Test-Mac10.15-Clang-MacBookAir7.2-GPU-IntelHD6000-x86_64-Release-All-Metal
Change-Id: If5813db95b07f5d272e80920486f461cc5a587fc
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/320956
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Makes it simpler to call methods that update the internal ref counted
state.
Change-Id: Iecefab2c14ff13eae2fa34eafdcc7e031b3c85b0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/320957
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Remove separate constructor arg from GrBackendRenderTarget.
Add appropriate checks in onWrap functions in GrD3DGpu to limit to
previous functionality.
Bug: skia:9832
Cq-Include-Trybots: luci.skia.skia.primary:Test-Win10-MSVC-Golo-GPU-QuadroP400-x86_64-Debug-All-Direct3D,Test-Win10-Clang-ShuttleA-GPU-RadeonHD7770-x86_64-Debug-All-Direct3D
Change-Id: Ieba398d4bc00d18fdb0adffcda81f1a166db24b3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/320757
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Pre-req for allowing rendering to an externally created MSSA VkImage.
Bug: skia:9832
Cq-Include-Trybots: luci.skia.skia.primary:Test-Debian10-Clang-NUC7i5BNK-GPU-IntelIris640-x86_64-Release-All-Vulkan,Test-Win10-Clang-NUC8i5BEK-GPU-IntelIris655-x86_64-Release-All-Vulkan,Test-Win10-Clang-ShuttleA-GPU-RadeonHD7770-x86_64-Release-All-Vulkan,Test-Android-Clang-GalaxyS9-GPU-MaliG72-arm64-Release-All-Android_Vulkan,Test-Android-Clang-GalaxyS7_G930FD-GPU-MaliT880-arm64-Release-All-Android_Vulkan,Test-Android-Clang-GalaxyS20-GPU-MaliG77-arm64-Release-All-Android_Vulkan,Test-Android-Clang-Pixel4XL-GPU-Adreno640-arm64-Release-All-Android_Vulkan,Test-Android-Clang-P30-GPU-MaliG76-arm64-Release-All-Android_Vulkan
Change-Id: Ibf41944c6946dda7e27bdcd509ecd04976fc9ade
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/320262
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Even when expanding clip ops were disabled, the max value allowed the
fuzzer to produce those disabled values. This should fix the fuzzer to
only produce valid intersect or difference clip ops.
Bug: chromium:1132687
Change-Id: I7368ff36a00e6b0e87ecbae5ba647d249299b9ca
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/320064
Commit-Queue: Mike Klein <mtklein@google.com>
Auto-Submit: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
We had lots of checks just checking defined but we always define
GR_TEST_UTILS
Change-Id: I588c50ddd91f71618a96ab6c9eda2050b423f611
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/319682
Commit-Queue: Greg Daniel <egdaniel@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Auto-Submit: Greg Daniel <egdaniel@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
This is a reland of 2bded27a96
Original change's description:
> Allow rect and circle blur fast cases to be used with rotation matrices.
>
> For circles this is trivial. The existing shader works as is.
>
> For rects this requires back projecting from device space.
>
> Adds a GM for rotated rect blurs and modifies a circle blur GM to add
> rotation.
>
> Bug: chromium:1087705
>
> Change-Id: I6b969552fbcc9f9997cfa061b3a312a5a71e8841
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/318757
> Reviewed-by: Robert Phillips <robertphillips@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
Bug: chromium:1087705
Change-Id: Ie3ef96c40461665f6207225a15e19b4cf5bcba94
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/319338
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit 2bded27a96.
Reason for revert: Seems to be blocking the Chrome roll
Original change's description:
> Allow rect and circle blur fast cases to be used with rotation matrices.
>
> For circles this is trivial. The existing shader works as is.
>
> For rects this requires back projecting from device space.
>
> Adds a GM for rotated rect blurs and modifies a circle blur GM to add
> rotation.
>
> Bug: chromium:1087705
>
> Change-Id: I6b969552fbcc9f9997cfa061b3a312a5a71e8841
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/318757
> Reviewed-by: Robert Phillips <robertphillips@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com,robertphillips@google.com
Change-Id: Iafb479f3b3561e226678a3020254c6e76d4ce284
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:1087705
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/319186
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Adds base class GrD3DAlloc and GrD3DMemoryAllocator, and a reference
to a GrD3DMemoryAllocator in GrBackendContext and a reference to a
GrD3DAlloc in GrD3DTextureResourceInfo. Internally, we override this
base class to define the AMD memory allocator.
Change-Id: I033924b0247ea330969b1398f25985e7a84aec11
Bug: skia:9935
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317243
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
For circles this is trivial. The existing shader works as is.
For rects this requires back projecting from device space.
Adds a GM for rotated rect blurs and modifies a circle blur GM to add
rotation.
Bug: chromium:1087705
Change-Id: I6b969552fbcc9f9997cfa061b3a312a5a71e8841
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/318757
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
FP gencode reads back matrix values in its dumpInfo method using rc().
This worked for SkM44; now it will work for SkMatrix as well.
Change-Id: I4efc7018529bd3c84aacc073fad2bfca7e12c517
Bug: skia:10748
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/318756
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This reverts commit b8ae7fa12a.
Reason for revert: Introduced a memory leak
Original change's description:
> Reland "Use Microsoft's ComPtr to wrap D3D12 objects."
>
> This is a reland of 0ef049177f
>
> Original change's description:
> > Use Microsoft's ComPtr to wrap D3D12 objects.
> >
> > Change-Id: I4bd173428a2b65f0bc1994fb794ef9d4d68d5ba0
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/314957
> > Reviewed-by: Brian Salomon <bsalomon@google.com>
> > Reviewed-by: Greg Daniel <egdaniel@google.com>
> > Commit-Queue: Jim Van Verth <jvanverth@google.com>
>
> Change-Id: Id0199db4061c67ed53da35e74dc31a004744be95
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/315655
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Commit-Queue: Jim Van Verth <jvanverth@google.com>
TBR=egdaniel@google.com,jvanverth@google.com,bsalomon@google.com
# Not skipping CQ checks because original CL landed > 1 day ago.
Change-Id: I3f8744668558f6b8f4f367eeeeff2f6aa2c36992
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/318209
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Passing in VK_IMAGE_LAYOUT_UNDEFINED will tell Skia to not update the
layout when doing the state change.
Bug: skia:10742
Change-Id: Ic59b7c95d3a73e29dcd6eec16a2fd138e1a1d95f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/318204
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
These are no longer needed now that we've migrated away.
Change-Id: Id308af7d40ffe0d539a3c6fd201220d145080928
Docs-Preview: https://skia.org/?cl=317281
Cq-Include-Trybots: luci.skia.skia.primary:Canary-Android,Canary-G3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317281
Commit-Queue: Adlai Holler <adlai@google.com>
Auto-Submit: Adlai Holler <adlai@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Now supports all plane configurations tested by WackyYUVFormatsGM.
Added WackyYUVFormatsGM that tests YUVA interface on SkImageGenerator.
Change-Id: I8326f098f1453b9702f04ff366431a516ca160c3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317097
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Adds variations of trickycubicstrokes and widebuttcaps that limit the
max number of hardware tessellation segments to 5. This exercises our
stroking logic for splitting curves and joins when they require more
segments than are supported by the hardware.
Bug: skia:10419
Change-Id: Ie52374b89e30bfa021b2de74e3cd32e02ab734d0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317268
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
now the builder returns the new image.
Change-Id: Ie56256390b96d3fdbe39f89784276947047df656
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/316442
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
This is a reland of e24f7f3de7
... with fix for ~0 constants for the pedantic MSVC.
Original change's description:
> refactor any()/all(), ptest for all()
>
> Part of this is a simple refactor, adapting any() and all() to the new
> style of specialization.
>
> And with that refactor in place, add AVX2/SSE4.1 for all() using ptest.
> This isn't terribly important, but it does help make Op::asserts run
> faster in the SkVM interpreter. I like to run with asserts enabled, and
> this makes passing asserts much cheaper---failing asserts are expensive
> still of course, printing to SkDebugf(), etc.
>
> Change-Id: Iebdeee701fab7c50cce8e457674b565f7dd2ec21
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317422
> Reviewed-by: Herb Derby <herb@google.com>
> Commit-Queue: Mike Klein <mtklein@google.com>
Cq-Include-Trybots: luci.skia.skia.primary:Build-Win-MSVC-x86_64-Debug
Change-Id: I93f08177ef3439e65e4383cc517dba60c0c4ef3e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317638
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Herb Derby <herb@google.com>
This is a reland of 4985db413d
...with a better implementation of map(). I don't understand
why we had to revert, but it had something with calling the
function pointer in map_(), so maybe this will help.
I've flattened the map_() / map() merge CL into this one,
and marked the resulting map() as no_sanitize("cfi"). I
don't see anything wrong, so I think it's a false positive.
Original change's description:
> update skvx scalar-fallback strategy
>
> Turns out Clang's a lot better at auto-vectorizing "obvious" scalar code
> into obvious vector code when it's written out the long way, e.g.
>
> F32x4 x = ...;
> x = { sqrtf(x[0]), sqrtf(x[1]), sqrtf(x[2]), sqrtf(x[3]) };
>
> vectorizes into sqrtps a lot more reliably than our recurse-onto-scalars
> strategy, and also better than the other naive approach,
>
> F32x4 x = ...;
> for (int i = 0; i < 4; i++) { x[i] = sqrtf(x[i]); }
>
> So here I've added a map(V, fn) -> V' using C++14 tricks to let the
> compiler handle the expansion of x = { fn(x[0]), fn(x[1]), ...
> fn(x[N-1]) } for any N, and implemented most skvx scalar fallback code
> using that.
>
> With these now vectorizing well at any N, we can remove any
> specializations we'd written for particular N, really tidying up.
>
> Over in the SkVM interpreter, this is a big improvement for ceil and
> floor, which were being done 2 floats at a time instead of 8. They're
> now slimmed way down to
>
> shlq $6, %r13
> vroundps $K, (%r12,%r13), %ymm0
> vroundps $K, 32(%r12,%r13), %ymm1
> jmp ...
>
> where K is 9 or 10 depending on the op.
>
> I haven't found a scalar function that Clang will vectorize to vcvtps2pd
> (the rounding one, not truncating vcvttps2pd), so I've kept lrint()
> written the long way, updated to the style I've been using lately with
> specializations inline.
>
> Change-Id: Ia97abe3c876008228bf62b1daacd6f6140408fc4
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317375
> Reviewed-by: Herb Derby <herb@google.com>
> Commit-Queue: Mike Klein <mtklein@google.com>
Cq-Include-Trybots: luci.chromium.try:linux_chromium_cfi_rel_ng
Bug: chromium:1129408
Change-Id: Ia9c14074b9a14a67dd221f4925894d35a551f9d7
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317551
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Herb Derby <herb@google.com>
This CL is also imperfect and incomplete but, although currently unused, it sketches in how the threadSafeProxyCache will be plumbed through the GrContexts and GrResourceCache.
Bug: 1108408
Change-Id: Idb012b6efd49291de69bd88e4b4c531458a3e553
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317360
Reviewed-by: Adlai Holler <adlai@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This reverts commit 4985db413d.
Reason for revert:
../../third_party/skia/include/private/SkVx.h:491:14: runtime error: control flow integrity check for type 'float (float)' failed during indirect function call
(/lib/x86_64-linux-gnu/libm.so.6+0x36460): note: (unknown) defined here
../../third_party/skia/include/private/SkVx.h:491:14: note: check failed in /b/s/w/ir/out/Release/viz_unittests, destination function located in /lib/x86_64-linux-gnu/libm.so.6
#0 0x55e964d3c1f9 in skvx::Vec<4, float> skvx::map_<4, float, float, 0ul, 1ul, 2ul, 3ul>(skvx::Vec<4, float> const&, float (*)(float), std::__1::integer_sequence<unsigned long, 0ul, 1ul, 2ul, 3ul>) ./../../third_party/skia/include/private/SkVx.h:491
I don't understand what's wrong here, but I have a better map() coming up anyway.
Original change's description:
> update skvx scalar-fallback strategy
>
> Turns out Clang's a lot better at auto-vectorizing "obvious" scalar code
> into obvious vector code when it's written out the long way, e.g.
>
> F32x4 x = ...;
> x = { sqrtf(x[0]), sqrtf(x[1]), sqrtf(x[2]), sqrtf(x[3]) };
>
> vectorizes into sqrtps a lot more reliably than our recurse-onto-scalars
> strategy, and also better than the other naive approach,
>
> F32x4 x = ...;
> for (int i = 0; i < 4; i++) { x[i] = sqrtf(x[i]); }
>
> So here I've added a map(V, fn) -> V' using C++14 tricks to let the
> compiler handle the expansion of x = { fn(x[0]), fn(x[1]), ...
> fn(x[N-1]) } for any N, and implemented most skvx scalar fallback code
> using that.
>
> With these now vectorizing well at any N, we can remove any
> specializations we'd written for particular N, really tidying up.
>
> Over in the SkVM interpreter, this is a big improvement for ceil and
> floor, which were being done 2 floats at a time instead of 8. They're
> now slimmed way down to
>
> shlq $6, %r13
> vroundps $K, (%r12,%r13), %ymm0
> vroundps $K, 32(%r12,%r13), %ymm1
> jmp ...
>
> where K is 9 or 10 depending on the op.
>
> I haven't found a scalar function that Clang will vectorize to vcvtps2pd
> (the rounding one, not truncating vcvttps2pd), so I've kept lrint()
> written the long way, updated to the style I've been using lately with
> specializations inline.
>
> Change-Id: Ia97abe3c876008228bf62b1daacd6f6140408fc4
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317375
> Reviewed-by: Herb Derby <herb@google.com>
> Commit-Queue: Mike Klein <mtklein@google.com>
TBR=mtklein@google.com,herb@google.com
Change-Id: I27b5eff3328bf2ddf7063ee0dee14a378ff23b89
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317546
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
This reverts commit e24f7f3de7.
Reason for revert: Build-Win-MSVC-x86_64-Debug
Original change's description:
> refactor any()/all(), ptest for all()
>
> Part of this is a simple refactor, adapting any() and all() to the new
> style of specialization.
>
> And with that refactor in place, add AVX2/SSE4.1 for all() using ptest.
> This isn't terribly important, but it does help make Op::asserts run
> faster in the SkVM interpreter. I like to run with asserts enabled, and
> this makes passing asserts much cheaper---failing asserts are expensive
> still of course, printing to SkDebugf(), etc.
>
> Change-Id: Iebdeee701fab7c50cce8e457674b565f7dd2ec21
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317422
> Reviewed-by: Herb Derby <herb@google.com>
> Commit-Queue: Mike Klein <mtklein@google.com>
TBR=mtklein@google.com,herb@google.com
Change-Id: Ib3ecbe93aa9d14b10dd87e8aa247f275c2c3eb67
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317545
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Part of this is a simple refactor, adapting any() and all() to the new
style of specialization.
And with that refactor in place, add AVX2/SSE4.1 for all() using ptest.
This isn't terribly important, but it does help make Op::asserts run
faster in the SkVM interpreter. I like to run with asserts enabled, and
this makes passing asserts much cheaper---failing asserts are expensive
still of course, printing to SkDebugf(), etc.
Change-Id: Iebdeee701fab7c50cce8e457674b565f7dd2ec21
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317422
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Turns out Clang's a lot better at auto-vectorizing "obvious" scalar code
into obvious vector code when it's written out the long way, e.g.
F32x4 x = ...;
x = { sqrtf(x[0]), sqrtf(x[1]), sqrtf(x[2]), sqrtf(x[3]) };
vectorizes into sqrtps a lot more reliably than our recurse-onto-scalars
strategy, and also better than the other naive approach,
F32x4 x = ...;
for (int i = 0; i < 4; i++) { x[i] = sqrtf(x[i]); }
So here I've added a map(V, fn) -> V' using C++14 tricks to let the
compiler handle the expansion of x = { fn(x[0]), fn(x[1]), ...
fn(x[N-1]) } for any N, and implemented most skvx scalar fallback code
using that.
With these now vectorizing well at any N, we can remove any
specializations we'd written for particular N, really tidying up.
Over in the SkVM interpreter, this is a big improvement for ceil and
floor, which were being done 2 floats at a time instead of 8. They're
now slimmed way down to
shlq $6, %r13
vroundps $K, (%r12,%r13), %ymm0
vroundps $K, 32(%r12,%r13), %ymm1
jmp ...
where K is 9 or 10 depending on the op.
I haven't found a scalar function that Clang will vectorize to vcvtps2pd
(the rounding one, not truncating vcvttps2pd), so I've kept lrint()
written the long way, updated to the style I've been using lately with
specializations inline.
Change-Id: Ia97abe3c876008228bf62b1daacd6f6140408fc4
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317375
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Implement min and max using if_then_else(y<x,...) on vectors
rather than recursing to std::min/std::max applied to scalars.
But actually, factor out and use naive_if_then_else(), which Clang can
reason through better than it can our specialized if_then_else(). This
lets every min() or max() I've looked at compile down to ideal codegen,
vmaxps, vpminsw, etc, where if you use if_then_else() you'd see the
literal comparison and blend as written.
I've been looking at q14x2 codegen in the interpreter, and most things
were already good, unexpectedly even uavg_q14x2. The biggest surprise
was how bad the min/max codegen was, and looking back, even the min_f32
and max_f32 codegen is super bad. This CL fixes all that, leaving us
with the ideal codegen using the specific instruction you'd want,
replacing a giant mess of code that recursed down to scalars.
mul_q14x2 is still bad, but an easy follow up.
Change-Id: I77b5d7c9aa20a9a2f5ceb3e40f1e18ace2a1b5c1
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317310
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Change-Id: Ib10215e1e5a86bf78cc34f9dca670417bb217b73
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317271
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
The default implementation of if_then_else is logically bitwise,
(cond & true_val) | (~cond & false_val)
The existing skvx specializations work only for 32-bit lanes, but we can
easily make them work for any type where the whole vector is the right
size by reducing the granularity down to byte level.
Existing code using 32-bit values and 0xffff'ffff or 0x0000'0000 masks
will continue to work the same. But this now lets us use, e.g. 16-bit
values with 0xffff and 0x0000 masks, or even things like 32-bit values
and a mask like 0xff00ff00, selecting byte by byte.
We can't go any lower without falling back on the generic bitwise
implementation, so we'll have to settle for not getting to use a mask
like 0x0f0f0f0f.
Change-Id: I8518cb3cafc7f6e1480b4ae8af50daad2d28c5df
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317170
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Ignores the miter limit if the join type is not kMiter.
Bug: skia:10419
Change-Id: Ib05895cf90c7bb0e25e9e8c3e26c13fef32f2e97
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317163
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Takes SkYUVAPixmaps. Still implemented in terms of SkYUVAIndex[4]
internally.
Replace all internal use cases except wacky_yuv_formats.
Takes GrRecordingContext rather than GrContext.
SkVideoDecoder updated to take GrRecordingContext.
Bug: skia:10632
Change-Id: I6e9b9b6a4f11333bce6f87c1ebff0acb297f6540
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/316837
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Adlai Holler <adlai@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
For the longest time, the libfuzzer binaries used by oss-fuzz
were just hacked onto the BUILD.gn file. This removes that patch
and makes them buildable from Skia proper.
After this, there should not be any modifications oss-fuzz needs
to do to a Skia checkout before it builds and runs.
Of note, oss-fuzz will define skia_use_libfuzzer_defaults to be
false so it can control those flags with more finesse (e.g.
fuzz with ASAN, fuzz with hong fuzz instead of libfuzzer). I
added on skia_use_libfuzzer_defaults so that a normal developer
gets something that works by default.
Bug: skia:10713
Change-Id: I024f5805060cba8f8560e1c2569b9309fb49a564
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/316536
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
This is also the final wire to connect, so with this CL we will try
using input attachments for dst blends in available.
Bug: skia:10409
Change-Id: I8bd953ea5eb056a55d8bf36d91008a9d7298d84d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/315650
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
We still occasionally downcast, so this is not airtight,
but it (1) allows us to know where we are downcasting and
(2) lets us move away from GrContext (and hopefully remove
it sooner than later.)
All three canaries are currently broken =( so here we go!
Bug: skia:104662
Change-Id: I84efe132574690b62ea512e194e4f9e318e9c050
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/316218
Commit-Queue: Adlai Holler <adlai@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
This partially unblocks Chrome from migrating from
SkCanvas-getGrContext to SkCanvas-recordingContext.
Change-Id: I1100387497ba8b482005bb1d147e9768590afe95
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/316449
Commit-Queue: Adlai Holler <adlai@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Auto-Submit: Adlai Holler <adlai@google.com>
We had several defines around the code base that were not
very descriptive. Additionally, we had a patch of extra
runtime restrictions living in oss-fuzz that were applied
when fuzzing over there for some fuzzers.
This has all be consolidated and controlled via the defines
documented in site/dev/testing/fuzz.md
As such, we can remove one of the patches that is in oss-fuzz,
taking us closer to being able to fuzz in the CI/CQ.
PS 1 renames existing fuzz defines to the new schema.
PS 2-3 backports skia.diff from oss-fuzz and changes those
definitions to have the _GREATLY modifier.
PS 5+ further condenses the defines so that there is one
define for gating the runtime checks.
Change-Id: Ia4ad96f30c1e9620a2123b510e97c6f501a2e257
Docs-Preview: https://skia.org/?cl=316443
Bug: skia:10713
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/316443
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Allows the user to limit the stream to a subset of the entire file.
SkFILEStream uses the current FILE position as the base position for the
stream; this allows the user to further limit the length of the stream
to a range of bytes in the file.
Change-Id: I36131ff19e75b65d501eabdfd9368f8fbb2e177f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/316357
Commit-Queue: Ben Wagner <bungeman@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Rename fSize to fEnd (since it is actually the offset of the end
underlying file, not the size of the file), fOriginalOffset to
fStart, and fOffset to fCurrent. Also initialize in the order fEnd,
fStart, then fCurrent to maintain the invariant that fCurrent should
always be kept within the range of fStart and fEnd, inclusive.
Change-Id: I8801288320cf82b071e4621c0e770ce16016953a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/316453
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
This CL adds a new type GrDstSampleType to say how we will sample the dst.
We add tracking of the GrDstSampleType in the recording of GrOps and
then during execution passing the information along to the GrPipeline.
In general the tracking of GrDstSampleType is a global state of a GrOpsTask
so it is kept separate fro the DstProxyView which is more specific to a
single Op on the GrOpsTask.
Bug: skia:10409
Change-Id: Ie843c31f2e48a887daf96cee99ed159b196cb545
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/315645
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Inlining shift=8 is trivial for any compiler.
This eliminates the need to unit test the two functions are the same.
Change-Id: Icd181ff11eab73fba26755a9fbecd57260c38bbf
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/315887
Commit-Queue: Mike Reed <reed@google.com>
Auto-Submit: Mike Klein <mtklein@google.com>
Reviewed-by: Mike Reed <reed@google.com>
This is a reland of 0ef049177f
Original change's description:
> Use Microsoft's ComPtr to wrap D3D12 objects.
>
> Change-Id: I4bd173428a2b65f0bc1994fb794ef9d4d68d5ba0
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/314957
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Reviewed-by: Greg Daniel <egdaniel@google.com>
> Commit-Queue: Jim Van Verth <jvanverth@google.com>
Change-Id: Id0199db4061c67ed53da35e74dc31a004744be95
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/315655
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
This reverts commit 0ef049177f.
Reason for revert: Looks like this is introducing a memory leak.
Original change's description:
> Use Microsoft's ComPtr to wrap D3D12 objects.
>
> Change-Id: I4bd173428a2b65f0bc1994fb794ef9d4d68d5ba0
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/314957
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Reviewed-by: Greg Daniel <egdaniel@google.com>
> Commit-Queue: Jim Van Verth <jvanverth@google.com>
TBR=egdaniel@google.com,jvanverth@google.com,bsalomon@google.com
Change-Id: Ib0333c00a7f8c3650bd2b077cbdfb6926c5870f4
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/315653
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Change-Id: I4bd173428a2b65f0bc1994fb794ef9d4d68d5ba0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/314957
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Speculative fix for Chrome crashes.
Implemented by separating out LOD and level caps.
Also don't allow GrContextOptions to enable manual mip mapping
if level control is not available.
Change-Id: Ibdf647792e1e018efeffa0af34ceb59e751e6749
Bug: chromium:1123874
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/315638
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This is a reland of ed63444587
Original change's description:
> Add idea of DataType to SkYUVAPixmapInfo.
>
> DataType describes the data type of YUVA channels
> independent of how they are grouped into planes.
>
> Adds mapping functions between SkColorType/channel count
> and DataType.
>
> SkYUVAPixmapInfo can be constructed from DataType and will
> choose appropriate SkColorTypes for each plane.
>
> Valid SkYUVAPixmapInfos now have the same DataType for each
> plane (could relax this in the future, esp for alpha plane).
>
> SkYUVAPixmapInfo::SupportedDataTypes specifies the supported
> combinations of SkYUVAInfo::PlanarConfig and
> kYUVAPixmapInfo::DataType supported by a GrContext (based on
> supported texture formats).
>
> SkImageGenerator/SkCodec YUVA query API now takes a
> SupportedDataTypes.
>
> Change-Id: I8791234638e6ba3396d1e7960b7bc210edc6dd57
> Bug: skia:10632
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/314276
> Reviewed-by: Leon Scroggins <scroggo@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
Bug: skia:10632
Change-Id: I35b55b7477c11c822fdb3729a9f84acff1eb785d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/315284
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Mechanically updated via Xcode "Replace Regular Expression":
typedef (.*) INHERITED;
-->
using INHERITED = $1;
The ClangTidy approach generated an even larger CL which would have
required a significant amount of hand-tweaking to be usable.
Change-Id: I671dc9d9efdf6d60151325c8d4d13fad7e10a15b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/314999
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This reverts commit ed63444587.
Reason for revert: trying to unblock android roller, which incorrectly thinks this has a merge conflict: https://b.corp.google.com/issues/167576324
Original change's description:
> Add idea of DataType to SkYUVAPixmapInfo.
>
> DataType describes the data type of YUVA channels
> independent of how they are grouped into planes.
>
> Adds mapping functions between SkColorType/channel count
> and DataType.
>
> SkYUVAPixmapInfo can be constructed from DataType and will
> choose appropriate SkColorTypes for each plane.
>
> Valid SkYUVAPixmapInfos now have the same DataType for each
> plane (could relax this in the future, esp for alpha plane).
>
> SkYUVAPixmapInfo::SupportedDataTypes specifies the supported
> combinations of SkYUVAInfo::PlanarConfig and
> kYUVAPixmapInfo::DataType supported by a GrContext (based on
> supported texture formats).
>
> SkImageGenerator/SkCodec YUVA query API now takes a
> SupportedDataTypes.
>
> Change-Id: I8791234638e6ba3396d1e7960b7bc210edc6dd57
> Bug: skia:10632
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/314276
> Reviewed-by: Leon Scroggins <scroggo@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com,robertphillips@google.com,scroggo@google.com
Change-Id: I72c39539a4766f10cac3ca3cdef6c503a8319ff1
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:10632
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/314895
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
There's an _mm_movemask_ps() intrinsic that gets at the movmskps
instruction, which grabs the top (sign) bit of each float directly
without needing to reinterpret them as bytes.
I wouldn't really have done this but I think Chrome's clang is
miscompiling the version at head that uses _mm_movemask_epi8(). The
SkNx<2,float> `!(a+b == a*b).anyTrue()` test case fails when I use that
compiler, and spooky things like adding SkDebugf() make it pass again.
Change-Id: Idd0698d46ccfe9a00909faca1c6693a70e91157a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/314860
Auto-Submit: Mike Klein <mtklein@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Reviewed-by: Herb Derby <herb@google.com>
- remove some workarounds
- more SI/SIN/SIT/SINT use
- rewrap a lot of code to 100 cols
- etc. misc.
Change-Id: I78b7ff272afcbb8658cf147aad8af85d0e2acf42
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/314676
Auto-Submit: Mike Klein <mtklein@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Reviewed-by: Herb Derby <herb@google.com>
DataType describes the data type of YUVA channels
independent of how they are grouped into planes.
Adds mapping functions between SkColorType/channel count
and DataType.
SkYUVAPixmapInfo can be constructed from DataType and will
choose appropriate SkColorTypes for each plane.
Valid SkYUVAPixmapInfos now have the same DataType for each
plane (could relax this in the future, esp for alpha plane).
SkYUVAPixmapInfo::SupportedDataTypes specifies the supported
combinations of SkYUVAInfo::PlanarConfig and
kYUVAPixmapInfo::DataType supported by a GrContext (based on
supported texture formats).
SkImageGenerator/SkCodec YUVA query API now takes a
SupportedDataTypes.
Change-Id: I8791234638e6ba3396d1e7960b7bc210edc6dd57
Bug: skia:10632
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/314276
Reviewed-by: Leon Scroggins <scroggo@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
No public user needs these.
Change-Id: Ieeb519a0778b01697c9bbb3b91ce8423eaa94e57
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/314316
Auto-Submit: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Also, move first-direction into SkPathRef.h so it can be referenced
by name in SkPath (instead of using uint8_t)
No functional change expected.
Change-Id: Ica4a8357a8156fd9a516118f23599a965b0fdd47
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/313980
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
This flag was added recently since I noticed it was missing and should
be checked. However, Dawn fails this check in chrome since it doesn't
report this flag correctly to DDLs. Going back to the previous status
quo for now.
Bug: skia:10672
Change-Id: Ib825fe5a69bff7af0d9893b95cd4df80289be7b2
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/313905
Commit-Queue: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Auto-Submit: Greg Daniel <egdaniel@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Subsequent CLs can work on combining convexity and direction
Bug: skia:10670
Change-Id: Ia44769ea88ffd99a56d4c6729a80a2044e790ec2
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/313837
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Mike Reed <reed@google.com>
This has always been a potential source of a bug. If the same texture is
used twice in a shader with different swizzles we would overwrite the
swizzle for the first use by that of the second use since there is
only one fixed function swizzle per texture. It's not part of the
sampler state.
We set the swizzle when it is a feature, but always to RGBA.
Also, highly speculative that this may improve ANGLE D3D11 ES3
performance compared to ES2.
Bug: skia:10644
Change-Id: I8877afc3043c5ddaafd26ea9f9bd372303328c71
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/313682
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
In a follow-up, I will explore more clearly tying together convexity
and direction internally -- perhaps a unified enum?
[ unknown, convex_cw, convex_ccw, concave ]
Change-Id: I9fc2a2205f40050f4c24c5bec7fc25c8b6d2461c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/313680
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
This also includes all the plumbing of this flag throughout our proxy
and surface system.
Bug: skia:10409
Change-Id: I48d40012049240cfa80e045ea090f68ce2d2ff0d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/313676
Reviewed-by: Robert Phillips <robertphillips@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
Note: The polarity of the staging flag is inverted from usual because
a G3 dependency with no SkUserConfig.h relies on the legacy API.
Once this lands, we will migrate them and others, then remove the
staging API. The inverted staging flag is kind of nice, actually - I may
use that pattern in the future. It means less total CLs and it's just as
easy to flip the bit on or off during debugging.
Bug: skia:104662
Change-Id: I48cba1eeae3e2e6f79918c6d243e0666e68ec71b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/310656
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Adlai Holler <adlai@google.com>
Previously, if you snapped off a shader and then changed uniforms
(without drawing & flushing), we'd trigger the SkData assert about
calling writeable_data when not-uniquely-owned. Now we lazily copy the
SkData when necessary.
Includes unit test that previously failed.
Bug: skia:10667
Change-Id: If8d9dd8106d41e66560d760cb36ed83371791fc7
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/313678
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
SkYUVAPixmapInfo is a SkYUVAInfo with per-plane color types and row
bytes. It describes a set of pixmaps that make up a planar image.
Consolidates validity checks of the SkYUVAInfo with the color types
and row bytes. It can provide SkImageInfos for each plane and also
assist with configuring planes to share a common allocation.
SkYUVAPixmaps is a collection of SkPixmaps that are valid for a
SkYUVAInfo. It can either wrap existing SkPixmaps or allocate and
own the memory. It consolidates validity checking of SkPixmaps with
the SkYUVAInfo. Replaces sk_gpu_test::YUVAPixmaps.
Minor tweaks to SkYUVAInfo naming, parameter order consistency, adds a
hasAlpha() method.
Bug: skia:10632
Change-Id: Ib0f48b8448fff22805fd0c04e07887d0b7338b76
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/312886
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Consistently use less than for comparisons and ordering and add braces.
Make documentation a bit more direct.
Change-Id: I3286ff3fac3e276b2e40afab5c9a27e202eab9cf
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/313556
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
Just noticed that this is no longer set for -arch arm64
(but is, correctly, for -arch arm64e).
Change-Id: I607bb052ce67f91186852156d832d97eed33788b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/313239
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
This reverts commit 6541013b53.
Reason for revert: TSAN issues with GrFence, and crash in GrMtlPipelineStateBuilder::CreatePipelineState.
Original change's description:
> Remove ARC from Metal backend
>
> Change-Id: I5ab28f6eda3b37d1b82c94c7cc6eaa2ce59157da
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/311113
> Reviewed-by: Adlai Holler <adlai@google.com>
> Reviewed-by: John Stiles <johnstiles@google.com>
> Commit-Queue: Jim Van Verth <jvanverth@google.com>
TBR=jvanverth@google.com,bsalomon@google.com,adlai@google.com,johnstiles@google.com
Change-Id: I031629b483fc46de8bd3751253e5391c2ce87853
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/312843
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Tunnels through SkImageGenerator as well.
The new SkCodec interface doesn't assume three 8 bit planes.
New SkYUVASpec more clearly defines chroma subsampling and siting of
the planes.
The intent is to use this for other YUVA APIs as well, in particular
SkImage factories in the future.
In this change we convert to the SkYUVASpec to SkYUVASizeInfo
and SkYUVAIndex[4] representation. But the intent is to use
the SkYUVASpec representation throughout the pipeline once
legacy APIs are removed.
orientation GM is replicated to test a variety of chroma
subsampling configs.
Bug: skia:10632
Change-Id: I3fad35752b87cac16c51b24824331f2ae7d458d3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/309658
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
We will still need to go through clients to remove uses of the main ctors
so that it can be deleted.
Change-Id: I7bdfa00ac56b2404cc7b2f183104ee97b4da1de7
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/311452
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
Other code outside this namespace will want to use this method soon.
Bug: skia:10419
Change-Id: Ib155f224866fd333b8f9a4b78e6c9e51ac0600df
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/311936
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
This method isn't used by anyone, and I needed to land SOMETHING
in the middle of banging my head against CL 310656 :-)
Bug: skia:104662
Change-Id: Iaf529ac7551b22213891eb4be78d7904938aa989
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/311816
Auto-Submit: Adlai Holler <adlai@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Change-Id: I5b1baf2bc3aafa03c1d0cace4f7c09a09cf4a084
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/311112
Reviewed-by: Julia Lavrova <jlavrova@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Allow the user of SkCustomTypefaceBuilder to set the SkFontStyle of the
resulting SkTypeface. This allows users to build font families.
Fix the Font_flatten test to actually work (instead of relying on the
magic behavior of nullptr for SkTypeface), add a test with the custom
typeface, and reduce the number of times the inner loop runs from
302,400 times to 4,032 times so that the test finishes in a reasonable
amount of time.
Bug: skia:10630
Change-Id: I0b5e939552ee4a9a1249eefbb7a7279a59b38e5a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/311596
Commit-Queue: Ben Wagner <bungeman@google.com>
Reviewed-by: Xiao Yu <xster@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Hopefully, this will let Chrome track down promiseImage fulfillment
mismatches.
Bug: 1116848
Change-Id: Ia1e5d6f7af4e2808ae4adfad85f4e96c1ea4fbd2
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/311096
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
To my surprise, this even works with homegrown smart pointers (such as
SkTLazy).
https://clang.llvm.org/extra/clang-tidy/checks/readability-redundant-smartptr-get.html
Find and remove redundant calls to smart pointer’s .get() method.
Examples:
ptr.get()->Foo() ==> ptr->Foo()
*ptr.get() ==> *ptr
*ptr->get() ==> **ptr
if (ptr.get() == nullptr) ... => if (ptr == nullptr) ...
Change-Id: I8ff541e0229656b4d8e875c8053a7e6138302547
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/310976
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Relocate under modules/audioplayer and package as a standalone
component.
Change-Id: If9dc72bb0abe170049a514c9931186703a3c138a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/310058
Commit-Queue: Florin Malita <fmalita@google.com>
Reviewed-by: Mike Reed <reed@google.com>
https://clang.llvm.org/extra/clang-tidy/checks/modernize-use-override.html
Adds override (introduced in C++11) to overridden virtual functions and
removes virtual from those functions as it is not required.
virtual on non base class implementations was used to help indicate to
the user that a function was virtual. C++ compilers did not use the
presence of this to signify an overridden function.
Change-Id: If66d8919358f72a4035190caf8d7569268037a9a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/310160
Commit-Queue: Mike Klein <mtklein@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Bug: skia:10369
Add SkEncodeImageWithNDK, mirroring the CG and WIC versions, for
encoding with the NDK APIs added to R.
Rename SK_ENABLE_NDK_DECODING to SK_ENABLE_NDK_IMAGES and use it for
both encoding and decoding.
Move code for converting to/from NDK types into a common location.
Update encode_platform.cpp to use NDK encoding APIs when available and
to use both types of webp (lossy and lossless). Add tests specifically
for the new implementation.
Update NdkDecodeTest to use ToolUtils::equal_pixels for comparing
pixels.
Change-Id: Ic62f89af27372ccce90b8e028e01c388a135a68c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/308800
Commit-Queue: Leon Scroggins <scroggo@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
This will allow the small path renderer to be used w/ DDLs.
This is broken out of the omnibus CL:
https://skia-review.googlesource.com/c/skia/+/307776 (Split the small path renderer into record-time and flush-time pieces)
Bug: 1108408
Change-Id: I64cc6ff677d0aead7cf2f097c0e7fbb15b49d49d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/309304
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This matches the Vulkan type. This also fixes a warning when comparing
to another uint64_t.
Update GrVkSamplerYcbcrConversion::Key to match as well.
Change-Id: I6fc5d9456ee466dc3d98240acf935139a7808a02
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/309325
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
* Fixes quality value
* Enables grabbing sample positions
* Enables centering samples for non-hardware AA
Change-Id: I5cabc0804b4a57347b7072b100c17310155c0ebc
Bug: skia:10476
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/308798
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
This isn't connected to anything yet and parallels what is done
for the text GrAtlasManager.
The rough pattern is that the GrContext hierarchy implements creating
the atlas but it is only exposed/made available via the flush state
(which derives from GrDrawMeshOp::Target).
TBR=bsalomon@google.com
Bug: 1108408
Change-Id: Iad7b5648877dbd20840e8d47c1d24131098ded94
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/309128
Reviewed-by: Robert Phillips <robertphillips@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Runtime effects previously allowed two kinds of global input variables:
'in' variables could be bool, int, or float. 'uniform' could be float,
vector, or matrix. Uniform variables worked like you'd expect, but 'in'
variables were baked into the program statically. There was a large
amount of machinery to make this work, and it meant that 'in' variables
needed to have values before we could make decisions about program
caching, and before we could catch some errors. It was also essentially
syntactic sugar over the client just inserting the value into their SkSL
as a string. Finally: No one was using the feature.
To simplify the mental model, and make the API much more predictable,
this CL removes 'in' variables entirely. We no longer need to
"specialize" runtime effect programs, which means we can catch more
errors up front (those not detected until optimization). All of the API
that referred to "inputs" (the previous term that unified 'in' and
'uniform') now just refers to "uniforms".
Bug: skia:10593
Change-Id: I971f620d868b259e652b3114f0b497c2620f4b0c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/309050
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
Bug: 1108408
Change-Id: Iad0b634a8a0d6dac64e3571a32e755d124401f66
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/309077
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Follow-on CLs will push higher up in SkDraw, so that everywhere today
we have to cons-up (with the associated mallocs) a temp SkPath we can
replace it with a stack-based SPath...
- drawRect
- drawOval
- drawRRect
- drawLine(s)
(similar to how this CL already handled quads and triangles)
Bug: skia:10566
Change-Id: I882b4f4c60e80235ca83c86c926e905b269a7afd
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/307784
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Reed <reed@google.com>
https://clang.llvm.org/extra/clang-tidy/checks/readability-const-return-type.html
`const` on a non-pointer/reference return type typically doesn't add
value and can have negative side effects. (i.e., returning a
`const std::string` isn't meaningfully different from returning a
`std::string`, but can sometimes inhibit move-related optimizations.)
In Skia's case, the priv() functions are a notable exception where const
return types are intentional and valuable. These calls have been marked
with NOLINT to exclude them from the check.
This check does not affect pointer and reference returns, where
constness is important.
Change-Id: I86cab92332f164e5ab710b4127182eec99831d7d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/308564
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Like shaders, sampling a null child will return the input color (in
this case, the output of the skia shader stage). This gives us a path
to removing the implicit input color passed to main, which is the real
goal. Using this to create more interesting color filters is also
possible, although we need to add the versions of sample() that take a
color to really unlock the potential.
Change-Id: I6a7506055120756497d7583f14d6f928180825fc
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/308515
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
This fixes a large number of SkSL namespaces which were labeled as if
they were anonymous, and also a handful of other mislabeled namespaces.
Missing namespace-end comments have been added throughout.
A number of diffs are just indentation-related (adjusting 1- or 3-
space indents to 2-space).
Change-Id: I6c62052a0d3aea4ae12ca07e0c2a8587b2fce4ec
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/308503
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Some of these checks are currently redundant (we don't allow color
filters to have children right now). But the next CL will re-add that
capability, and the unit tests here will ensure we don't re-break things
by allowing child-sampling to violate the color filter invariant.
Change-Id: I54c10d8b1d1e376c13347296765185d42b9f644a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/308285
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Android migration landed in Android CL 12234077
Chrome migration is landing in Chrome CL 2335812
Note: makeFromCompressedTexture is not used by Chrome.
Bug: skia:104662
Change-Id: Ibbe6d412cf22e87188926383d10b21f780208e48
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/305102
Commit-Queue: Adlai Holler <adlai@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Auto-Submit: Adlai Holler <adlai@google.com>
This function isn't used by Chrome so we migrate directly.
Flutter migration is at https://github.com/flutter/engine/pull/20235
Bug: skia:104662
Change-Id: I9d875acdbd162f50a6d86b3a4cae3f400e4dd38f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/305180
Commit-Queue: Adlai Holler <adlai@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
This reverts commit 07438b0cda.
Bug: skia:10369
Bug: skia:10371
This will allow Skia clients developing for Android 11+ to rely on
Android's NDK APIs for decoding, which will allow them to decode
without including their own decoding libraries (e.g. libjpeg-turbo).
Using these APIs also provides support for static HEIF images.
Run ImageGenSrc in kPlatform_Mode on Android to verify decoding
visually.
Add tests and a grayscale png.
Update some test bots running Android R to specify ndk_api so they will
run the new code.
Change-Id: I4ca07d832dbd6a9d8cff0faea975fd70da00718f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/308185
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
This also follows up on the comments Rob left in his zombie review.
Bug: skia:104662
Change-Id: I7031f7b2832eb3f47025e5d269248b854cc912e0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/307780
Reviewed-by: Robert Phillips <robertphillips@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Auto-Submit: Adlai Holler <adlai@google.com>
This reverts commit cfef980939.
Reason for revert: Breaking Google3 roll
Original change's description:
> Add an SkImageGenerator that uses NDK APIs
>
> Bug: skia:10369
> Bug: skia:10371
>
> This will allow Skia clients developing for Android 11+ to rely on
> Android's NDK APIs for decoding, which will allow them to decode
> without including their own decoding libraries (e.g. libjpeg-turbo).
> Using these APIs also provides support for static HEIF images.
>
> Run ImageGenSrc in kPlatform_Mode on Android to verify decoding
> visually.
>
> Add tests and a grayscale png.
>
> Update some test bots running Android R to specify ndk_api so they will
> run the new code.
>
> Change-Id: Ica782339b2414d472ede0b61729a127ce41892a5
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/305689
> Reviewed-by: Mike Klein <mtklein@google.com>
> Commit-Queue: Leon Scroggins <scroggo@google.com>
TBR=djsollen@google.com,mtklein@google.com,scroggo@google.com,brianosman@google.com,reed@google.com
Change-Id: Ifed506a76a0ff5903d101c1bf7330d319b8376a6
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:10369
Bug: skia:10371
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/308180
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
Bug: skia:10369
Bug: skia:10371
This will allow Skia clients developing for Android 11+ to rely on
Android's NDK APIs for decoding, which will allow them to decode
without including their own decoding libraries (e.g. libjpeg-turbo).
Using these APIs also provides support for static HEIF images.
Run ImageGenSrc in kPlatform_Mode on Android to verify decoding
visually.
Add tests and a grayscale png.
Update some test bots running Android R to specify ndk_api so they will
run the new code.
Change-Id: Ica782339b2414d472ede0b61729a127ce41892a5
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/305689
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
These two staging flags were removed in Chrome CL 2327135
Bug: skia:104662
Change-Id: I5b794f0c5e2c53cca82ec471dda3da3a722f5c9e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/307781
Reviewed-by: Robert Phillips <robertphillips@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Auto-Submit: Adlai Holler <adlai@google.com>
SkFontDescriptor and its serialization and usage are updated to better
reflect how variations should be serialized. In addition this begins
teasing apart SkFontData since it is now mostly an artifact of how the
FreeType port works than anything else.
This also removes SkTypeface::MakeFromFontData since it is no longer
used and since SkFontData (which it takes as a parameter) was never
public. SkFontMgr::makeFromFontData now only exists to support older
skps and may be removed in the future.
Change-Id: I266bd5e87de85788661cdf5c571592ea1f2ae669
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/307344
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
The majority of existing call sites were automatically updated using
clang-tidy -fix. A small handful required a manual update,
e.g. CppCodeGen.
This check is a bit lenient, and in particular will not flag cases like
`std::unique_ptr<Base>(new Derived())` which is still pretty common
throughout our codebase. This CL does not attempt to replace all the
cases that ClangTidy does not flag.
Change-Id: I5eba48ef880e25d22de80f321a68c389ba769e36
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/307459
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Need to notify the underlying pathref if we've made oval or rrect
Bug: skia:9000
Change-Id: I57a801f1fb446b99634d7b028249a812a5a978f1
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/307516
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
GCC intrisics type validation is stricter than the one in Clang, so
passing a uint16x4_t to a function expected to accept float16x4_t
is not valid.
Bug: chromium:819294
Change-Id: I6d68e5458345e78bdb05dd028481fe9cae36c5ff
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/307276
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
SK_GL must explicitly be defined to enable the GL backend,
e.g. by setting skia_use_gl in gn args.
Change-Id: I61008b5422f4690e6f012609b239cd74e63d9f92
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/306732
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
The ClangTidy check `bugprone-unused-raii` has been enabled at
review.skia.org/306838; this check provides equivalent protection.
Change-Id: I9f3858bfd2bede107d509a5a206a08293d5f914c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/306953
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
More recontexting for SkImage. Chrome flag in CL 2323135.
Flutter migration landed in https://github.com/flutter/engine/pull/19962
Bug: skia:104662
Change-Id: Id725eb130310639457ba90f378ecdb334dd5f3cd
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/306182
Auto-Submit: Adlai Holler <adlai@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
The use of __builtin_unreachable() and __assume(false) are actually
injections of undefined behavior. They do not crash and they may allow
the compiler to assume that any values which could cause that location
to be reached cannot occur. They should only be used after code which
cannot return but the compiler cannot know that (such as inline assembly
which does not return and calls to functions which should have been
declared noreturn but were not).
Replace their use with __builtin_trap() and __failfast(). These are
similar to __builtin_debugtrap() or __debugbreak() but also indicate
that execution should not be resumed.
Change-Id: I46c1362f4e86944cc8e03f6f5837875ac71b69f3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/297024
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
These methods aren't used by our clients – plus we're only de-powering the
arg here so we should do fine on canaries.
Bug: skia:104662
Change-Id: I2ff5a4e06a5e82458148d555b6dc8643e7e5f60f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/306336
Auto-Submit: Adlai Holler <adlai@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
This reverts commit 3eff2459d4.
Reason for revert: did I break abandongpu bot?
Original change's description:
> Never share pixels when we make a subset image
>
> - mostly just affects Lazy images (raster was already always copying)
> - issue with other factories that offer subsetting
> - (e.g. MakeFromGenerator)
> - can we remove those options, and require makeSubset() afterwards?
> - greatly simplifies dealing with mipmaps
>
> Landing this would obsolete
> https://skia-review.googlesource.com/c/skia/+/305960
>
> Related: https://skia-review.googlesource.com/c/skia/+/306136
>
> Related: https://bugs.chromium.org/p/skia/issues/detail?id=10544
>
> Change-Id: I074420543bd2fcd46ed1620bbf0eed00371ab018
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/305970
> Commit-Queue: Mike Reed <reed@google.com>
> Reviewed-by: Leon Scroggins <scroggo@google.com>
TBR=mtklein@google.com,bsalomon@google.com,robertphillips@google.com,scroggo@google.com,brianosman@google.com,reed@google.com
Change-Id: Iab2f92855fe61e48f0e432b7257eb7ddef78fcfa
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/306377
Reviewed-by: Mike Reed <reed@google.com>
Change-Id: Iec4c3dedd0790fc637a914517b2abbb8e303520f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/306320
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
It isn't expected that sk_abort_no_print should return (it should
abort). This also allows removal of the SkUNREACHABLE from SK_ABORT.
Also make sk_abort_no_print actually not able to return.
Change-Id: Ibd5eda019820ed7e91de37a048efdfb0d1097aff
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/306188
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
Since subsetting may require rasterizing/resolving the generator, we may
also need access to the GrDirectContext. To simplify apis, rely on
makeSubset() for that.
Related: https://skia-review.googlesource.com/c/skia/+/305970
Change-Id: I1980e3c823fb6cf54f197c350942c2f82b03e20f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/306136
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
This fixes a Chrome canary failure in skia CL 305970 where
Chrome has the flag set, and so we can't internally call the
GrDirectContext variant.
This matches the more recent migrations we've done. Hopefully
soon Chrome's GrDirectContext CL will get its final approvals and
all of this can go away.
Bug: skia:104662
Change-Id: I09cdff54e01c22578a970e5967815a2e470752bf
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/306185
Commit-Queue: Adlai Holler <adlai@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Auto-Submit: Adlai Holler <adlai@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Bug: chromium:1101491
Bug: b/161896447
Found using
git grep -wiEIl \ '(he)|(she)|(his)|(hers)|(him)|(her)|(guy)|(guys)'
Change-Id: I6b91853de067fd4c2e84f7ec70275522ce6c8bfc
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/306186
Commit-Queue: Leon Scroggins <scroggo@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Auto-Submit: Leon Scroggins <scroggo@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
They have been replaced with equivalent constants (and given the
requisite k prefix).
Change-Id: I70907eec234e0861cc97aac1ca03086faca42f9a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/306160
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Previously, DataEntry supported only move-construction but not move-
assignment.
Change-Id: I1dc1b2bc90a3dfe4cd74d4a6c2986b7d777f84d3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/306156
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
This isn't used, and doesn't seem like we will have a use for it going
forward. The SkString class should be used to allocate strings.
Change-Id: I024d1d7edb5d4946fa9ecfd4e10af84afc8b5df8
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/306065
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
* transformed masks -> GrTransformedMaskSubRun
* GrMaskSubRun is SDFT -> GrSDFTSubRun
There is much duplicate code, which will be cleaned up shortly.
Change-Id: If54e388e89f7db15ddfd4b4354f0a1b4d6f5e36b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/305686
Reviewed-by: Herb Derby <herb@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Herb Derby <herb@google.com>
We will rely on the tracking of GrBuffers on the command list to manage
lifetime of d3d buffers. This also means we won't destroy the underlying
d3d buffer resource until the destructor.
Change-Id: I26084b8fffc65038891a0e48662d6a864c5dd8c1
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/305719
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Includes full-range Rec709 and BT2020, as well as more precise
matrices for 10 and 12 bit BT2020.
Bug: chromium:1108626
Change-Id: I28cbce982a00c082c8b510dbb7b144bdc1ce02e0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/305596
Reviewed-by: Dale Curtis <dalecurtis@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Bug: 842296
Change-Id: I4564f96d4f179211df19893270ccc222abcdd446
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/305439
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Only works on raster backend for the now.
Bug: skia:10344
Change-Id: I2c82d5345ae83a2bb2744ab27e3d971c57ea989e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/303271
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Change-Id: Ic44e24057b95bb014504f02a736fb4341afc8971
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/304856
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
fSubRunPtr is currently mutable, but that will change in future CLs.
Change-Id: Ia3ab40855d7ea7c42eadf8889688fefb064f1bc9
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/304696
Commit-Queue: Herb Derby <herb@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Also mipMapped params to GrBackendTexture functions to mipmapped
GrBackendTexture::hasMipMaps -> GrBackendTexture::hasMipmaps
Misc test vars fMipMapped -> fMipmapped
Change-Id: Ic0651d14fc106c21b0ab45529875b95ed8dc2dfd
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/304598
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
For consistency with other enums and public APIs.
Change-Id: I026da5529f11051693cae5691c7ad92fad5ed446
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/304597
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Change-Id: Ia2cfbca8982b57399b6681cbb4501c2933ab4df7
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/304576
Auto-Submit: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Change-Id: I016de62543b5ba16a7193262cea343a77a71ba3b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/304201
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
GrTypesPriv seems safe to include even without the GPU backend, which
lets us remove the condition from the struct layout. Hoisting and
reformatting the type conversion code just to make the core of the
factory easier to read. (More of this is coming).
Change-Id: I6e36b92789debc7b2630117c285c592ca7cbc37b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/304001
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
This is part of a larger effort to clean up the SkImage API and require
users to provide the direct GPU context for manipulating GPU images.
Bug: skia:104662
Change-Id: Ic7fd675a6ec09f001266fd79efdf084368ab6cd5
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/303630
Commit-Queue: Adlai Holler <adlai@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Auto-Submit: Adlai Holler <adlai@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
The SkMaskSubRun is just a temporary name while I pull out the
different subclasses.
Change-Id: I363742a98a0596ba3d282b918cc0492ab1e0e5d9
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/303357
Reviewed-by: Herb Derby <herb@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Fix: use ImageGenerator factory instead of SkCodec, in case the client
provides generators in some other fashion (other than SkCodec).
This reverts commit 442d424a72.
Change-Id: Ia22f44ef83900413f905fe38570d18a640fca98e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/303496
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Mike Reed <reed@google.com>
This is part of a larger effort to force SkImage users to specify
the direct context they want to use when manipulating GPU images.
Chrome CL 2299194 (landed) enables the staging flag.
bug: skia:10466
Change-Id: I959db57dd8dca5c2622eb5ffaa7de161c4d6d8f0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/302643
Commit-Queue: Brian Salomon <bsalomon@google.com>
Auto-Submit: Adlai Holler <adlai@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
and related changes. This is another CL in the series that is replacing
GrContext with the GrDirectContext/GrRecordingContext pair.
Change-Id: Id0a3cfd5a5f92f7680d9c58f3a1753322311221c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/302637
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Adlai Holler <adlai@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Replaced with SkFontArguments::VariationPosition and
SkFontArguments::VariationPosition::Coordinate since the arguments are
about a variation specification and it's coordinates.
SkFontParameters::Axis actually deals with axes and their properties.
Change-Id: I377c9c5efa8e7b7e2649fc038f765062e30391e5
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/302905
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
- add f32<->f16 functions to skvx
- add f32<->f16 x86 instructions to skvm::Assembler
- add f32<->f16 ops to skvm,
using the skvx functions in the interpreter
Still TODO:
use the new x86 instructions in the JIT
(For now like in many other ways, the aarch64 JIT
continues to languish. Will pick that back up one day.)
Change-Id: Ib8dc1ccdc75ecb23769ea4947d66d3ab22520f23
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/302942
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Although it appeared that the experimental_simd CanvasKit build was
working, the build was not producing actual wasm SIMD operations. This
CL fixes that issue by changing the build arguments.
This issue also fixes an incorrect type issue with the SkVx wasm SIMD
implementation.
Bug: skia:10453
Change-Id: If26f84b09e4d84df36be589245878c821972dffc
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/302669
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
This reverts commit a56da9ee92.
Reason for revert: UBSAN complains in Vulkan OOPRDDL mode
Original change's description:
> Add a direct context arg to makeColorTypeAndColorSpace
>
> This is part of a larger effort to de-power SkImage and force users to
> specify the GPU context for all new images.
>
> Staging flag landed in Chrome CL 2296632.
>
> Bug: skia:10466
> Change-Id: I6b7bbec10369f7d8ee884dd1bcc234d332c30a6c
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/302290
> Commit-Queue: Adlai Holler <adlai@google.com>
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
TBR=bsalomon@google.com,robertphillips@google.com,adlai@google.com
Change-Id: Ide36bed6966d3d92ad6b8d05f897d22d287b40b1
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:10466
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/302824
Reviewed-by: Adlai Holler <adlai@google.com>
Commit-Queue: Adlai Holler <adlai@google.com>
This is part of a larger effort to de-power SkImage and force users to
specify the GPU context for all new images.
Staging flag landed in Chrome CL 2296632.
Bug: skia:10466
Change-Id: I6b7bbec10369f7d8ee884dd1bcc234d332c30a6c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/302290
Commit-Queue: Adlai Holler <adlai@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Move PathGlyph to GrPathSubRun, and make the array for the path
data directly in the alloc instead of in a vector.
Change-Id: I861cb934e356f526f96e593d25019b00451f77b8
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/302640
Reviewed-by: Herb Derby <herb@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Herb Derby <herb@google.com>
