The bug was fixed in https://crrev.com/c/995796, but this CL adds a
regression test to make sure it stays fixed.
Bug: chromium:827806
Change-Id: I9f4aed364bbd310af4253da457887a8b8015533a
Reviewed-on: https://chromium-review.googlesource.com/993237
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Eric Holk <eholk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52409}
The AssembleMove and AssembleSwap tests would only perform moves on stack
parameters. This limits us to testing with slots that are likely to be in range
of loads and stores. As well as only testing memory accesses with positive
offsets relative to the frame pointer.
This patch addresses these limitations by moving half of the stack parameters
into spill slots, to then perform moves on them. Additionally, to increase
ranges, we create articial space between each spilled slot.
As a drive-by, allow giving custom names to code objects created with the
CodeAssemblerTester. It helps a lot inspecting disassembly.
And finally, this CL uncovered a bug where I had forgotten to initialize
FixedArrays, which would make the incremental marker crash.
Bug: v8:6848
Change-Id: Ic1954c1896130f6c55e09a3068bf341cc4c68670
Reviewed-on: https://chromium-review.googlesource.com/980613
Commit-Queue: Pierre Langlois <pierre.langlois@arm.com>
Reviewed-by: Bill Budge <bbudge@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52406}
Add support for decoding anyref globals, and some drive-by cleanups.
R=titzer@chromium.org
Bug: v8:7581
Change-Id: I3527f996a3fa1a890918a5924e951fbafa394cf2
Reviewed-on: https://chromium-review.googlesource.com/997655
Reviewed-by: Ben Titzer <titzer@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52391}
This is a reland of 63ecddc814
Original change's description:
> [runtime] Remove the construct_stub field of the SFI
>
> Don't dispatch based on the construct_stub field anymore. Rather than
> read it out and jump to the construct stub, we can switch on the
> builtin_id.
>
> Builtins will always have builtin_id as a Smi, so this signals we need
> to jump to JSBuiltinsConstructStub. The only exception is for uncompiled
> functions, which will have kCompileLazy as the builtin_id, but need to
> jump to the generic stub instead.
>
> API function calls will have a FunctionTemplateInfo in the SFI
> function_data field, and need to go to the builtins stub as well.
>
> The final case is everything else, which should go to the generic stub.
>
> Bug: v8:7503
> Change-Id: I14790a5f9784dc0d940bf10a05f5310026e1d482
> Reviewed-on: https://chromium-review.googlesource.com/980941
> Reviewed-by: Leszek Swirski <leszeks@chromium.org>
> Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
> Commit-Queue: Peter Marshall <petermarshall@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#52345}
TBR=bmeurer@chromium.org
Bug: v8:7503
Change-Id: Ie46bfb0af173ad7ac8cbdfeed1865e60f3f413f7
Reviewed-on: https://chromium-review.googlesource.com/997712
Reviewed-by: Peter Marshall <petermarshall@chromium.org>
Commit-Queue: Peter Marshall <petermarshall@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52389}
Fixes a crash that happens when calling postMessage on an empty typed
array.
GetBuffer should only call MaterializeArrayBuffer for on-heap buffers,
but the on-heap check is slightly wrong. This CL moves the on-heap check
logic to the JSTypedArray class so that other parts of the codebase
don't need to worry about how that is determined.
Also add some dchecks to materialize itself. It should only receive
on-heap buffers and should always transform them to off-heap buffers.
There is also no reason for it to be static, so change that here too.
Bug: chromium:797588
Change-Id: Icd88a5b68e424d82c9f1f7889ca42a40a72a1bdc
Reviewed-on: https://chromium-review.googlesource.com/995898
Commit-Queue: Peter Marshall <petermarshall@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52388}
In order to clarify the difference between, e.g., InstructionStart and
instruction_start, rename as follows:
Code::instruction_start -> raw_instruction_start
Code::instruction_end -> raw_instruction_end
Code::instruction_size -> raw_instruction_size
The difference between the camel-case and raw_* function families is
in how they handle off-heap-trampoline Code objects. For example, when
called on an off-heap-trampoline: raw_instruction_start returns the
trampoline's entry point, while InstructionStart returns the off-heap
code's entry point (located in the .text section of the binary).
Some callsites were updated to call the camel-case function family as
appropriate.
Bug: v8:6666
Change-Id: I4a572f47c2d161a853599d7c17879e263b0d1a87
Reviewed-on: https://chromium-review.googlesource.com/997532
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52387}
Removing these tests from skip list because corresponding wasm simd
opcodes lowering has been implemented.
Change-Id: I77bbbee573ba65cf27dc9ee39f4d352bafb5849f
Reviewed-on: https://chromium-review.googlesource.com/988032
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Ivica Bogosavljevic <ivica.bogosavljevic@mips.com>
Cr-Commit-Position: refs/heads/master@{#52383}
test-heap/TransitionsArraySimpleToFull was relying on an allocation
happening (and GC being triggered) right at the start of
TransitionsAccessor::Insert. That allocation would put the TransitionsAccessor
back to the kUninitialized state. If there's no allocation at that point of the
program logic, the test will fail, since the TransitionsAccessor will be go to
the kFullTransitionArray state.
(Needed for the in-place weak ref work, which will remove the allocation at that point.)
BUG=v8:7308
Change-Id: Id3985e107d86440fe05daf5f3f29c84d028df929
Reviewed-on: https://chromium-review.googlesource.com/995476
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Michael Stanton <mvstanton@chromium.org>
Commit-Queue: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52374}
This is a reland of 7a2c371383
Original change's description:
> [debug] introduced runtime side effect check
>
> This CL demonstrates minimum valuable addition to existing debug evaluate
> without side effects mechanism.
> With this CL user can evaluate expressions like:
> [a,b] // create any kind of temporary array literals
> [a,b].reduce((x,y) => x + y, 0); // use reduce method
> [1,2,3].fill(2); // change temporary arrays
>
> The core idea: any change of the object created during evaluation without
> side effects is side effect free. As soon as we try to store this temporary
> object to object existed before evaluation we will terminate execution.
>
> Implementation:
> - track all objects allocated during evaluation and mark them as temporary,
> - patch all bytecodes which change objects.
>
> A little more details (including performance analysis): [1].
>
> [1] https://docs.google.com/document/d/10qqAtZADspPnpYa6SEdYRxrddfKIZJIzbLtGpsZQkRo/edit#
>
> Bug: v8:7588
> Change-Id: I69f7b96e1ebd7ad0022219e8213211c7be72a111
> Reviewed-on: https://chromium-review.googlesource.com/972615
> Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#52370}
Bug: v8:7588
Change-Id: Ibc92bf19155f2ddaedae39b0c576b994e84afcf8
Reviewed-on: https://chromium-review.googlesource.com/996760
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52373}
This is a reland of dbdede0101
after a webkit layout test (geolocation-api/timestamp.html) was
fixed by
https://chromium-review.googlesource.com/c/chromium/src/+/994343 .
Original change's description:
> Implement a new spec for timezone offset calculation
>
> https://github.com/tc39/ecma262/pull/778 was recently merged
> to Ecma 262.
>
> It changes the way to convert between "local time" and UTC in such
> a way that it'd work for all timezones whether or not there has
> been any change in the timezone offset of the standard time. For
> instance, Europe/Moscow and some parts of US state of Indiana have
> changed the standard (non-DST) timezone offset a few times. The
> previous spec assumes that the the standard timezone offset is
> constant, but the new spec take into account the offset change
> history.
>
> In addition, it specifies a new way to calculate the timezone
> offset during a timezone transition (either in and
> out of DST or timezone offset shift).
>
> During a negative transition (e.g. fall backward / getting
> out of DST), repeated times are to be interpreted as if the
> offset before the transition is in effect.
>
> During a positive transition (e.g. spring forward / getting
> into DST), skipped times are to be treated similarly. That
> is, they are to be interpreted as if the offset before the
> transition is in effect.
>
> With icu-timezone-data, v8 is compliant to the new spec for the
> past and the future as well as now whether or not the standard
> timezone offset of a given timezone has changed over time
> (e.g. Europe/Moscow, Pacific/Apia). With icu-timezone-data,
> Australia/Lord_Howe (30 minute DST change) also works per spec.
>
> Without icu-timezone-data, it works only for timezones of which
> the standard timezone offset is the same as the current offset
> (e.g. most North American timezones other than parts of Indiana)
> and of which the DST shift is an hour. For instance, it doesn't work
> for Europe/Moscow in 2010 when the standard timezone offset was
> +4h because the current (2018) standard timezone offset is +3h. Neither
> does it for Lord Howe in Australia with the DST shift of 0.5 hr.
>
> This CL used to require one of the two ICU CLs below, but not
> any more.
>
> https://chromium-review.googlesource.com/c/chromium/deps/icu/+/572652
> https://chromium-review.googlesource.com/851265 (a proposed CL to the
> upstream ICU).
>
> Bug: v8:3547,chromium:417640,v8:5714
> Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
> Change-Id: Ib162295da5bee31b2390bd0918157014aebd3e33
> Reviewed-on: https://chromium-review.googlesource.com/572148
> Commit-Queue: Jungshik Shin <jshin@chromium.org>
> Reviewed-by: Daniel Ehrenberg <littledan@chromium.org>
> Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#52332}
Bug: v8:3547, chromium:417640, v8:5714
Change-Id: I47536c111143f75e3cfeecf5d9761c43a98a10f5
Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng;master.tryserver.blink:linux_trusty_blink_rel
Reviewed-on: https://chromium-review.googlesource.com/995971
Commit-Queue: Jungshik Shin <jshin@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52372}
This reverts commit 7a2c371383.
Reason for revert: msan is broken
Original change's description:
> [debug] introduced runtime side effect check
>
> This CL demonstrates minimum valuable addition to existing debug evaluate
> without side effects mechanism.
> With this CL user can evaluate expressions like:
> [a,b] // create any kind of temporary array literals
> [a,b].reduce((x,y) => x + y, 0); // use reduce method
> [1,2,3].fill(2); // change temporary arrays
>
> The core idea: any change of the object created during evaluation without
> side effects is side effect free. As soon as we try to store this temporary
> object to object existed before evaluation we will terminate execution.
>
> Implementation:
> - track all objects allocated during evaluation and mark them as temporary,
> - patch all bytecodes which change objects.
>
> A little more details (including performance analysis): [1].
>
> [1] https://docs.google.com/document/d/10qqAtZADspPnpYa6SEdYRxrddfKIZJIzbLtGpsZQkRo/edit#
>
> Bug: v8:7588
> Change-Id: I69f7b96e1ebd7ad0022219e8213211c7be72a111
> Reviewed-on: https://chromium-review.googlesource.com/972615
> Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#52370}
TBR=ulan@chromium.org,rmcilroy@chromium.org,yangguo@chromium.org,kozyatinskiy@chromium.org,leszeks@chromium.org
Change-Id: Ied1739c6308b13a4981189e0999f5912316cf456
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:7588
Reviewed-on: https://chromium-review.googlesource.com/996135
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52371}
This CL demonstrates minimum valuable addition to existing debug evaluate
without side effects mechanism.
With this CL user can evaluate expressions like:
[a,b] // create any kind of temporary array literals
[a,b].reduce((x,y) => x + y, 0); // use reduce method
[1,2,3].fill(2); // change temporary arrays
The core idea: any change of the object created during evaluation without
side effects is side effect free. As soon as we try to store this temporary
object to object existed before evaluation we will terminate execution.
Implementation:
- track all objects allocated during evaluation and mark them as temporary,
- patch all bytecodes which change objects.
A little more details (including performance analysis): [1].
[1] https://docs.google.com/document/d/10qqAtZADspPnpYa6SEdYRxrddfKIZJIzbLtGpsZQkRo/edit#
Bug: v8:7588
Change-Id: I69f7b96e1ebd7ad0022219e8213211c7be72a111
Reviewed-on: https://chromium-review.googlesource.com/972615
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52370}
With the Ignition + Turbofan pipeline there is very little overlap between the data
needed for unoptimized compilation and optimized compilation. As a result, it is
cleaner to split up the CompilationInfo into UnoptimizedCompilationInfo and
OptimizedCompilationInfo.
Doing so also necessitate splitting up CompilationJob into UnoptimizedCompilationJob
and OptimizedCompilationJob - again there is not much overlap so this seems cleaner.
Change-Id: I1056ad520937b7f8582e4fc3ca8f4910742de30a
Reviewed-on: https://chromium-review.googlesource.com/995895
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52369}
The first part of this change updates StoreMem_offset_oob_i64 to use one page of
Wasm memory, rather than just a few bytes. Using less than a page was out of
spec for Wasm anyway, so this is better.
This required a small change in the test runner to set and clear the
thread_in_wasm flag around Wasm calls. This was accomplished by a
ThreadInWasmScope convenience class.
The majority of the changes are because the cctest environment does not support
runtime exceptions. In the code generator, where we used to throw a
WasmMemOutOfBounds exception, we now need to call out to the test hook instead
if runtime exceptions are not supported. This involved plumbing the
runtime_exception_support flag down to the code generator. Rather than adding
and shuffling around extra parameters everywhere, this CL packages the previous
protected instruction list in a new WasmCompilationData object that now includes
the runtime_exception_support flag as well.
Bug: v8:5277
Change-Id: Ic9c9e5a53a07a7773b58c0aee7c26bbd2ddf82f3
Reviewed-on: https://chromium-review.googlesource.com/989017
Commit-Queue: Eric Holk <eholk@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52368}
This exposes new flags to allow embedders to whitelist callbacks as
side-effect-free during evaluation with throwOnSideEffect.
Accessors and Functions/FunctionTemplates can take a new param on:
- v8::Object::SetNativeDataProperty
- v8::Object::SetLazyDataProperty
- v8::Object::SetAccessor
- v8::FunctionTemplate::New
- v8::FunctionTemplate::NewWithCache
- v8::Function::New
While Interceptors can be created with an additional flag:
PropertyHandlerFlag::kHasNoSideEffect
Bug: v8:7515
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng
Change-Id: I14823316bdd6de6d362a1104b65f13504d0db056
Reviewed-on: https://chromium-review.googlesource.com/994550
Commit-Queue: Erik Luo <luoe@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52367}
This reverts commit 57bf0bfefb.
Reason for revert: <INSERT REASONING HERE>
Original change's description:
> [wasm] Merge the WasmContext into WasmInstanceObject
>
> This change makes lifetime management of WasmCode much simpler.
> By using the WasmInstanceObject as the context for WASM code execution,
> including the pointer to the memory base and indirect function tables,
> this keeps the instance alive when WASM code is on the stack, since
> the instance object is passed as a parameter and spilled onto the stack.
> This is in preparation of sharing the code between instances and
> isolates.
>
> Bug: v8:7424
>
> Change-Id: Ic2e4b7bcc2feb20001d0553a615a8a9dff36317e
> Reviewed-on: https://chromium-review.googlesource.com/958520
> Commit-Queue: Ben Titzer <titzer@chromium.org>
> Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
> Reviewed-by: Andreas Haas <ahaas@chromium.org>
> Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#52361}
TBR=mstarzinger@chromium.org,titzer@chromium.org,ahaas@chromium.org,clemensh@chromium.org
Change-Id: I653e27b46dbc43ad773eda4292d521a508f42d79
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:7424
Reviewed-on: https://chromium-review.googlesource.com/995418
Reviewed-by: Ben Titzer <titzer@chromium.org>
Commit-Queue: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52364}
This change makes lifetime management of WasmCode much simpler.
By using the WasmInstanceObject as the context for WASM code execution,
including the pointer to the memory base and indirect function tables,
this keeps the instance alive when WASM code is on the stack, since
the instance object is passed as a parameter and spilled onto the stack.
This is in preparation of sharing the code between instances and
isolates.
Bug: v8:7424
Change-Id: Ic2e4b7bcc2feb20001d0553a615a8a9dff36317e
Reviewed-on: https://chromium-review.googlesource.com/958520
Commit-Queue: Ben Titzer <titzer@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52361}
We sometimes allow allocation to fail and return a null Handle in that
case (e.g. for grow_memory). This refactors this code to return a
MaybeHandle instead, to document that allocation might fail and to force
the caller to handle this.
R=mstarzinger@chromium.org
Change-Id: Ia3ba65f840cfb1cf93e8dbd508a17375c19bae58
Reviewed-on: https://chromium-review.googlesource.com/995438
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52358}
Before reporting coverage data, we attempt to reduce clutter by
merging nested and consecutive ranges. Nested ranges are merged, if
the child range has the same execution count as the parent range.
Sibling ranges are merged, if one sibling begins where the other ends
and execution counts are identical.
This allowed an invalid transformation in which a range with an
execution count of 1 would be merged into the parent change, but the
sibling range with identical start and end points and a count of 0
would remain, effectively deleting the covered range.
For example:
{start: 0, end: 10, count: 1},
{start: 5, end: 8, count: 1}, // It's invalid to remove this.
{start: 5, end: 8, count: 0}
The fix is to separate the parent and sibling merge passes, and
removing duplicate ranges in-between.
Bug: chromium:827530
Change-Id: Ic35eae1d4a106746570ce9cb412ed6710ef6da53
Reviewed-on: https://chromium-review.googlesource.com/992114
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52352}
Drive-by cleanup: remove megamorphic stub cache lookup support from generic property
store code. This lookup is no longer necessary because
1) fast stores to existing properties get all the information from the map,
2) transitioning store targets are taken directly from the transition array,
so in both cases there's no point in doing a store handler lookup.
Bug: v8:5988
Change-Id: I95c0a08e7d1a76bb0f4475a9bd685e4e11e16a48
Reviewed-on: https://chromium-review.googlesource.com/983921
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52349}
This reverts commit 63ecddc814.
Reason for revert:
https://build.chromium.org/p/client.v8/builders/V8%20Linux64%20-%20internal%20snapshot/builds/14773
Original change's description:
> [runtime] Remove the construct_stub field of the SFI
>
> Don't dispatch based on the construct_stub field anymore. Rather than
> read it out and jump to the construct stub, we can switch on the
> builtin_id.
>
> Builtins will always have builtin_id as a Smi, so this signals we need
> to jump to JSBuiltinsConstructStub. The only exception is for uncompiled
> functions, which will have kCompileLazy as the builtin_id, but need to
> jump to the generic stub instead.
>
> API function calls will have a FunctionTemplateInfo in the SFI
> function_data field, and need to go to the builtins stub as well.
>
> The final case is everything else, which should go to the generic stub.
>
> Bug: v8:7503
> Change-Id: I14790a5f9784dc0d940bf10a05f5310026e1d482
> Reviewed-on: https://chromium-review.googlesource.com/980941
> Reviewed-by: Leszek Swirski <leszeks@chromium.org>
> Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
> Commit-Queue: Peter Marshall <petermarshall@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#52345}
TBR=petermarshall@chromium.org,leszeks@chromium.org,bmeurer@chromium.org
Change-Id: I2031913ab5a12018ad932f920792aa1f6faa5e22
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:7503
Reviewed-on: https://chromium-review.googlesource.com/995293
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52346}
Don't dispatch based on the construct_stub field anymore. Rather than
read it out and jump to the construct stub, we can switch on the
builtin_id.
Builtins will always have builtin_id as a Smi, so this signals we need
to jump to JSBuiltinsConstructStub. The only exception is for uncompiled
functions, which will have kCompileLazy as the builtin_id, but need to
jump to the generic stub instead.
API function calls will have a FunctionTemplateInfo in the SFI
function_data field, and need to go to the builtins stub as well.
The final case is everything else, which should go to the generic stub.
Bug: v8:7503
Change-Id: I14790a5f9784dc0d940bf10a05f5310026e1d482
Reviewed-on: https://chromium-review.googlesource.com/980941
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Peter Marshall <petermarshall@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52345}
This CL allows builtin continuations to handle pending exceptions.
This implements exception handling for the promise constructor in
case of deoptimization.
Bug: v8:7584
Change-Id: Ib5df5eb6606abb3f9690f294397981858dbdbf25
Reviewed-on: https://chromium-review.googlesource.com/983912
Commit-Queue: Sigurd Schneider <sigurds@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52340}
This patch teaches Runtime.callFunctionOn to run evals inside its
task. This is aligned with how Runtime.evaluate works.
R=kozy
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I3189beebc9020703d2b2e23a7c828a2394d43910
Reviewed-on: https://chromium-review.googlesource.com/994070
Commit-Queue: Andrey Lushnikov <lushnikov@chromium.org>
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52339}
This reverts commit dbdede0101.
Reason for revert: Fails webkit_tests, blocks roll: https://build.chromium.org/p/client.v8.fyi/builders/V8-Blink%20Linux%2064
Original change's description:
> Implement a new spec for timezone offset calculation
>
> https://github.com/tc39/ecma262/pull/778 was recently merged
> to Ecma 262.
>
> It changes the way to convert between "local time" and UTC in such
> a way that it'd work for all timezones whether or not there has
> been any change in the timezone offset of the standard time. For
> instance, Europe/Moscow and some parts of US state of Indiana have
> changed the standard (non-DST) timezone offset a few times. The
> previous spec assumes that the the standard timezone offset is
> constant, but the new spec take into account the offset change
> history.
>
> In addition, it specifies a new way to calculate the timezone
> offset during a timezone transition (either in and
> out of DST or timezone offset shift).
>
> During a negative transition (e.g. fall backward / getting
> out of DST), repeated times are to be interpreted as if the
> offset before the transition is in effect.
>
> During a positive transition (e.g. spring forward / getting
> into DST), skipped times are to be treated similarly. That
> is, they are to be interpreted as if the offset before the
> transition is in effect.
>
> With icu-timezone-data, v8 is compliant to the new spec for the
> past and the future as well as now whether or not the standard
> timezone offset of a given timezone has changed over time
> (e.g. Europe/Moscow, Pacific/Apia). With icu-timezone-data,
> Australia/Lord_Howe (30 minute DST change) also works per spec.
>
> Without icu-timezone-data, it works only for timezones of which
> the standard timezone offset is the same as the current offset
> (e.g. most North American timezones other than parts of Indiana)
> and of which the DST shift is an hour. For instance, it doesn't work
> for Europe/Moscow in 2010 when the standard timezone offset was
> +4h because the current (2018) standard timezone offset is +3h. Neither
> does it for Lord Howe in Australia with the DST shift of 0.5 hr.
>
> This CL used to require one of the two ICU CLs below, but not
> any more.
>
> https://chromium-review.googlesource.com/c/chromium/deps/icu/+/572652
> https://chromium-review.googlesource.com/851265 (a proposed CL to the
> upstream ICU).
>
> Bug: v8:3547,chromium:417640,v8:5714
> Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
> Change-Id: Ib162295da5bee31b2390bd0918157014aebd3e33
> Reviewed-on: https://chromium-review.googlesource.com/572148
> Commit-Queue: Jungshik Shin <jshin@chromium.org>
> Reviewed-by: Daniel Ehrenberg <littledan@chromium.org>
> Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#52332}
TBR=adamk@chromium.org,littledan@chromium.org,mlippautz@chromium.org,jshin@chromium.org
Change-Id: I6b3bf4427c761b106280d565a3912cd8e25cf87e
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:3547, chromium:417640, v8:5714
Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
Reviewed-on: https://chromium-review.googlesource.com/994192
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52338}
This reverts commit cd1dd34f20.
Patchset 1 is the original CL that was reverted. Patchset 2 has the
fix.
TBR=bmeurer@chromium.org
Bug: v8:7611
Change-Id: I15291175ab894ef667c001e1b21b8b220e1f9b48
Reviewed-on: https://chromium-review.googlesource.com/993995
Reviewed-by: Sathya Gunasekaran <gsathya@chromium.org>
Commit-Queue: Sathya Gunasekaran <gsathya@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52337}
This change implements the WebAssembly.Global object and constructor,
but none of the accessors or functions.
There is a new flag to enable this: --experimental-wasm-mut-global.
Change-Id: Ifeb270d57392d7ca0900c80c0038932c96ee8b61
Reviewed-on: https://chromium-review.googlesource.com/989296
Commit-Queue: Ben Smith <binji@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52335}
This reverts commit 0cd7468b86.
Reason for revert: Blocks v8 roll into chromium: https://crbug.com/828499
Original change's description:
> [wasm] Always enable guard regions on 64-bit platforms
>
> This change makes full 8 GiB guard regions always enabled on 64-bit
> platforms.
>
> Additionally, since all Wasm memory allocation paths have some form of
> guard regions, this removes and simplifies most of the logic around
> whether to enable guard regions.
>
> R=gdeepti@chromium.org
>
> Change-Id: Idf3fbcc11ac70ea2ee7eb88c2173d6a1410395e1
> Reviewed-on: https://chromium-review.googlesource.com/985142
> Commit-Queue: Eric Holk <eholk@chromium.org>
> Reviewed-by: Brad Nelson <bradnelson@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#52310}
TBR=bradnelson@chromium.org,gdeepti@chromium.org,eholk@chromium.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Change-Id: I126b5afe283a4fe08adfa301e637d2641c29cccd
Reviewed-on: https://chromium-review.googlesource.com/993160
Reviewed-by: Eric Holk <eholk@chromium.org>
Commit-Queue: Eric Holk <eholk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52334}
This patch enables ShouldOptimizeForMemoryUsage if the old generation
size is within 1/8th of the max old generation size.
This patch also passes the reduce-memory flag to incremental marking
whenever ShouldOptimizeForMemoryUsage is enabled.
Bug: chromium:824214
Change-Id: I5cfc0566ca0e23dfa1b8c0439a4e67424ddc852d
Reviewed-on: https://chromium-review.googlesource.com/973524
Commit-Queue: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Hannes Payer <hpayer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52333}
https://github.com/tc39/ecma262/pull/778 was recently merged
to Ecma 262.
It changes the way to convert between "local time" and UTC in such
a way that it'd work for all timezones whether or not there has
been any change in the timezone offset of the standard time. For
instance, Europe/Moscow and some parts of US state of Indiana have
changed the standard (non-DST) timezone offset a few times. The
previous spec assumes that the the standard timezone offset is
constant, but the new spec take into account the offset change
history.
In addition, it specifies a new way to calculate the timezone
offset during a timezone transition (either in and
out of DST or timezone offset shift).
During a negative transition (e.g. fall backward / getting
out of DST), repeated times are to be interpreted as if the
offset before the transition is in effect.
During a positive transition (e.g. spring forward / getting
into DST), skipped times are to be treated similarly. That
is, they are to be interpreted as if the offset before the
transition is in effect.
With icu-timezone-data, v8 is compliant to the new spec for the
past and the future as well as now whether or not the standard
timezone offset of a given timezone has changed over time
(e.g. Europe/Moscow, Pacific/Apia). With icu-timezone-data,
Australia/Lord_Howe (30 minute DST change) also works per spec.
Without icu-timezone-data, it works only for timezones of which
the standard timezone offset is the same as the current offset
(e.g. most North American timezones other than parts of Indiana)
and of which the DST shift is an hour. For instance, it doesn't work
for Europe/Moscow in 2010 when the standard timezone offset was
+4h because the current (2018) standard timezone offset is +3h. Neither
does it for Lord Howe in Australia with the DST shift of 0.5 hr.
This CL used to require one of the two ICU CLs below, but not
any more.
https://chromium-review.googlesource.com/c/chromium/deps/icu/+/572652https://chromium-review.googlesource.com/851265 (a proposed CL to the
upstream ICU).
Bug: v8:3547,chromium:417640,v8:5714
Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
Change-Id: Ib162295da5bee31b2390bd0918157014aebd3e33
Reviewed-on: https://chromium-review.googlesource.com/572148
Commit-Queue: Jungshik Shin <jshin@chromium.org>
Reviewed-by: Daniel Ehrenberg <littledan@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52332}
This is a follow-up to https://chromium-review.googlesource.com/981687.
When a wasm function has a large stack frame, the x64 code generator
performs the stack overflow check before constructing the frame. This
requires the use of the `address_of_real_stack_limit` external
reference.
This reference is thread local, so if it is not relocated the stack
overflow check will always fail.
Bug: chromium:808848
Change-Id: I0edf3fe5a006242fc50d0bff44cd9dd0e7d85bd9
Reviewed-on: https://chromium-review.googlesource.com/982906
Commit-Queue: Ben Smith <binji@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52330}
This adds a systematic test for binary operations on different sets of
registers. By loading a number of values from memory to locals, we
create a cache state where all registers are used to hold local
variables. We then pick two of them and perform a binary operation on
them.
R=titzer@chromium.org
Bug: v8:7589, v8:6600
Change-Id: I2a4855810bb5c39247688c43cbe9d12d64fbc181
Reviewed-on: https://chromium-review.googlesource.com/992412
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52329}
Makes CallHandlerInfo its own instance type, with an additional
map to distinguish side-effect-free handlers. In a followup, we
can expose an API flag to set the map.
This CL does not support whitelisting calls to ObjectTemplates
that use SetCallAsFunctionHandler().
Bug: v8:7515
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng
Change-Id: Ie32fe144046a9fae3e3b1ea5602b0da3db8a5616
Reviewed-on: https://chromium-review.googlesource.com/965741
Reviewed-by: Hannes Payer <hpayer@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Erik Luo <luoe@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52328}
When peeking into descriptor arrays (for Function.prototype.bind
inlining), we need to check the number of descriptors rather than
the length of the DescriptorArray.
Bug: chromium:825045
Change-Id: I55dbe1544e5e4cb8e23d873961c71ed12294d89c
Reviewed-on: https://chromium-review.googlesource.com/991812
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52315}
This change makes full 8 GiB guard regions always enabled on 64-bit
platforms.
Additionally, since all Wasm memory allocation paths have some form of
guard regions, this removes and simplifies most of the logic around
whether to enable guard regions.
R=gdeepti@chromium.org
Change-Id: Idf3fbcc11ac70ea2ee7eb88c2173d6a1410395e1
Reviewed-on: https://chromium-review.googlesource.com/985142
Commit-Queue: Eric Holk <eholk@chromium.org>
Reviewed-by: Brad Nelson <bradnelson@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52310}
Because the GC is not aware of address space usage, this CL causes Wasm to
explicitly trigger a GC when its address space limit is reached in hopes of
being able to successfully allocate memory.
R=mlippautz@chromium.orgR=gdeepti@chromium.org
Change-Id: I2dcc560dd3d351dbfc4dda2f7c321c470a4d9fff
Reviewed-on: https://chromium-review.googlesource.com/985103
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Eric Holk <eholk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52305}
Register x25 is not reserved for anything else, so return it to the
Turbofan register allocator.
Change-Id: Ic905831683a825a1e1dd682552fd459dfc2323fe
Reviewed-on: https://chromium-review.googlesource.com/980976
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Commit-Queue: Martyn Capewell <martyn.capewell@arm.com>
Cr-Commit-Position: refs/heads/master@{#52301}
For the wasm2js wrappers we have an optimization to call a JavaScript
function directly if the signature of the JavaScript function matches
the signature of the WebAssembly import. However, we are not supposed
to do this optimization if the imported function is a constructor,
because constructors can only be called with `new`. With this CL we
do not apply this optimization when the imported function is a
constructor.
R=titzer@chromium.org
Bug: chromium:824859
Change-Id: I1722367bd865d0b129eadf7d4849182410447179
Reviewed-on: https://chromium-review.googlesource.com/985974
Reviewed-by: Ben Titzer <titzer@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52296}
This relands commit 496d05967c.
Original change's description:
> [heap] Detect ineffective GCs near the heap limit.
>
> Currently V8 can enter CPU thrashing GC loop near the heap limit. In
> such cases it is better to trigger an out-of-memory failure earlier to
> avoid wasting CPU time and to avoid unresponsiveness.
>
> This patch adds a mechanism for tracking consecutive ineffective GCs.
> A GC is considered ineffective if the heap size after the GC is still
> close to the heap limit and if the average mutator utilization dropped
> below a fixed threshold.
>
> V8 execution is aborted after four consecutive ineffective GCs.
>
> Bug: chromium:824214
TBR: hpayer@chromium.org
Change-Id: Ib09d24d6280078ce6c33519309a2563c70fb68e1
Reviewed-on: https://chromium-review.googlesource.com/980555
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Ulan Degenbaev <ulan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52286}
We need to bypass shortcuts when executing accessors defined via FunctionTemplate
if we have break points at function entry.
R=ishell@chromium.org, jgruber@chromium.org
Bug: v8:7596
Change-Id: I0e1bdbbba0f7dcd0fb7fe90d35b18234d073fe94
Reviewed-on: https://chromium-review.googlesource.com/980316
Commit-Queue: Yang Guo <yangguo@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52276}
Intent to ship:
https://groups.google.com/d/msg/v8-users/ShhW0Xewph0/1-OT9q0_DQAJ
Bug: v8:6791
Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
Change-Id: Ibcf5ac09c0099496ef2c6a3c23bef9f9e72658f1
Reviewed-on: https://chromium-review.googlesource.com/981596
Commit-Queue: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Mathias Bynens <mathias@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52256}
When a wasm function has a large stack frame, the x64 code generator
performs the stack overflow check before constructing the frame. This
requires using the `address_of_real_stack_limit` external reference, as
well as the `ThrowWasmStackOverflow` runtime function.
`ThrowWasmStackOverflow` is called via a generated trampoline, but it is
not a builtin, so the serializer adds it to the `stub_lookup_` map. This
map is encoded by using a monotonically increasing `stub_id` that starts
at 0.
When the function is serialized, a stub is differentiated from a builtin
by which half of the `i32` bits is used, upper or lower. A stub only
uses the lower 16 bits and a builtin only uses the upper 16 bits.
The deserializer checks whether the lower 16 bits are 0; if so, it is
determined to be a builtin. But if the `stub_id` is 0, then it will be
confused with builtin 0 (`RecordWrite`). Calling the builtin instead of
the stub causes a crash.
This CL starts all `stub_id`s at 1, which prevents the builtin/stub
confusion.
There is an additional bug that is not fixed by this CL:
`ThrowWasmStackOverflow` shouldn't be called at all. Currently it is
called because `address_of_real_stack_limit` is a thread-local value
that is not properly relocated.
Bug: chromium:808848
Change-Id: I06b3e650ea58ad717dcc47a3716443e16582e711
Reviewed-on: https://chromium-review.googlesource.com/981687
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Ben Smith <binji@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52252}
Also annotate maps with the space, now that this can be RO_SPACE as well
as MAP_SPACE.
Bug: v8:7464
Change-Id: Id597b2195c179b38f93b0e1c6b2ce9ef04e4f0e4
Reviewed-on: https://chromium-review.googlesource.com/980554
Commit-Queue: Dan Elphick <delphick@chromium.org>
Reviewed-by: Hannes Payer <hpayer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52251}
This reverts commit 496d05967c.
Reason for revert: https://logs.chromium.org/v/?s=chromium%2Fbb%2Fclient.v8%2FV8_Linux64_-_internal_snapshot%2F14705%2F%2B%2Frecipes%2Fsteps%2FCheck__flakes_%2F0%2Flogs%2FOutOfMemoryIneffectiv..%2F0
Original change's description:
> [heap] Detect ineffective GCs near the heap limit.
>
> Currently V8 can enter CPU thrashing GC loop near the heap limit. In
> such cases it is better to trigger an out-of-memory failure earlier to
> avoid wasting CPU time and to avoid unresponsiveness.
>
> This patch adds a mechanism for tracking consecutive ineffective GCs.
> A GC is considered ineffective if the heap size after the GC is still
> close to the heap limit and if the average mutator utilization dropped
> below a fixed threshold.
>
> V8 execution is aborted after four consecutive ineffective GCs.
>
> Bug: chromium:824214
> Change-Id: I647032707d49e5383e1317c5e7616dd57077ea32
> Reviewed-on: https://chromium-review.googlesource.com/978178
> Commit-Queue: Ulan Degenbaev <ulan@chromium.org>
> Reviewed-by: Hannes Payer <hpayer@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#52244}
TBR=ulan@chromium.org,hpayer@chromium.org
Change-Id: I267d247010a90224be60c27c83eeb37c3878fba5
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:824214
Reviewed-on: https://chromium-review.googlesource.com/982072
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Ulan Degenbaev <ulan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52246}
Currently V8 can enter CPU thrashing GC loop near the heap limit. In
such cases it is better to trigger an out-of-memory failure earlier to
avoid wasting CPU time and to avoid unresponsiveness.
This patch adds a mechanism for tracking consecutive ineffective GCs.
A GC is considered ineffective if the heap size after the GC is still
close to the heap limit and if the average mutator utilization dropped
below a fixed threshold.
V8 execution is aborted after four consecutive ineffective GCs.
Bug: chromium:824214
Change-Id: I647032707d49e5383e1317c5e7616dd57077ea32
Reviewed-on: https://chromium-review.googlesource.com/978178
Commit-Queue: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Hannes Payer <hpayer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52244}
This CL changes the poisoning in the interpreter to use the
infrastructure used in the JIT.
This does not change the original flag semantics:
--branch-load-poisoning enables JIT mitigations as before.
--untrusted-code-mitigation enables the interpreter mitigations
(now realized using the compiler back-end), but does not enable
the back-end based mitigations for the Javascript JIT. So in effect
--untrusted-code-mitigation makes the CSA pipeline for bytecode handlers
use the same mechanics (including changed register allocation) that
--branch-load-poisoning enables for the JIT.
Bug: chromium:798964
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: If7f6852ae44e32e6e0ad508e9237f24dec7e5b27
Reviewed-on: https://chromium-review.googlesource.com/928881
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Tobias Tebbi <tebbi@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52243}
The instruction scheduler is not supported on these platforms.
Bug: v8:7577
Change-Id: If89494153407c6223e30d856dd0f3152eb0c5817
Reviewed-on: https://chromium-review.googlesource.com/973362
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Georgia Kouveli <georgia.kouveli@arm.com>
Cr-Commit-Position: refs/heads/master@{#52241}
--cleanup-code-caches-at-gc flag was removed in
b8b25e1c27,
rendering the test obsolete.
Change-Id: I34331d230102924899c89d3330379df51a489029
Reviewed-on: https://chromium-review.googlesource.com/980937
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Franziska Hinkelmann <franzih@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52239}
The embedder can get notification when V8 heap size approaches the heap limit
and can extend the heap limit if needed using
- v8::Isolate::AddNearHeapLimitCallback
- v8::Isolate::RemoveNearHeapLimitCallback
This generalizes the exiting v8::debug::SetOutOfMemoryCallback API.
Bug: chromium:824214
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Ia444cb7efb6fe85c57fa3785e8fd1d8b654a5224
Reviewed-on: https://chromium-review.googlesource.com/979447
Commit-Queue: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52238}
This is done now while embedders have yet to adapt to the new API before
it becomes hard to migrate.
Also renamed variable/methods to use "worker threads" rather than
"background" nomenclature.
Extracted from https://chromium-review.googlesource.com/c/v8/v8/+/978443/7
while resolving the more contentious bits around using task runners.
TBR=rmcilroy@chromium.org
Bug: chromium:817421
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng
Change-Id: Ie3ddf15a708e829c0f718d89bebf3e96d1990c16
Reviewed-on: https://chromium-review.googlesource.com/980953
Commit-Queue: Gabriel Charette <gab@chromium.org>
Reviewed-by: Gabriel Charette <gab@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52231}
This has been made possible when custom builtin constructors were
removed.
R=jgruber@chromium.org
Bug: v8:178, v8:7518
Change-Id: I7ee064c3b899732ebe9381ea004f231fa6c0cef0
Reviewed-on: https://chromium-review.googlesource.com/975541
Commit-Queue: Yang Guo <yangguo@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52229}
We don't want to run into the situation of breaking inside of
debug-evaluate. That would get even more confusing with throw-on-side-effect.
R=kozyatinskiy@chromium.org
Bug: v8:7592
Change-Id: I93f5de63d8943792ff000dbf7c6311df655d3793
Reviewed-on: https://chromium-review.googlesource.com/978164
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Commit-Queue: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52227}
The mutator utilizaton is computed for each mark-compact GC cycle as
mutator_time / total_time, where
- total_time is the time from the end of the previous GC to the end of
the current GC
- mutator_time = total_time - incremental_steps_duration - gc_time.
Bug: chromium:824214
Change-Id: Ie1814f22f0816a3c9c579107f4950f6fc8c8a72d
Reviewed-on: https://chromium-review.googlesource.com/978215
Commit-Queue: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Hannes Payer <hpayer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52221}
The optimization was replacing
String.fromCharCode(x) == "y"
with x == y instead of (x & 0xFFFF) == y if x was outside
of uint16 range.
Bug: v8:7340, v8:7531
Change-Id: I967306cc2e05c28de82e16cf1b2312fe47396a7d
Reviewed-on: https://chromium-review.googlesource.com/979808
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Sigurd Schneider <sigurds@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52214}
This param is no longer used to construct the SFI.
Bug: v8:7503
Change-Id: Ic93c91ce0ad9acf84da7f382c9a170c732db7176
Reviewed-on: https://chromium-review.googlesource.com/977926
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Peter Marshall <petermarshall@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52205}
This relands commit ed3636e21bc772fec35deefc90850dc5bf850775..
Original change's description:
> [heap] Ensure that OOM callback is called before OOM.
>
> This patch also fixes MaxReserved() to accound for page headers and
> adds two tests for heap size and memory allocator size near OOM.
>
> Bug: chromium:824214
> Change-Id: I5bbe00a9d6a5798cdf4481861a10dca842244a63
> Reviewed-on: https://chromium-review.googlesource.com/973614
> Reviewed-by: Hannes Payer <hpayer@chromium.org>
> Commit-Queue: Ulan Degenbaev <ulan@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#52184}
TBR=machenbach@chromium.org
Change-Id: Idc3086a8b9dd30038f48cae64c9a8eb0b45ee372
Reviewed-on: https://chromium-review.googlesource.com/977913
Commit-Queue: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52200}
This reverts commit ed3636e21b.
Reason for revert: Seems to lead to several timeouts in debug mode:
https://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20debug/builds/19780
And on windows.
Original change's description:
> [heap] Ensure that OOM callback is called before OOM.
>
> This patch also fixes MaxReserved() to accound for page headers and
> adds two tests for heap size and memory allocator size near OOM.
>
> Bug: chromium:824214
> Change-Id: I5bbe00a9d6a5798cdf4481861a10dca842244a63
> Reviewed-on: https://chromium-review.googlesource.com/973614
> Reviewed-by: Hannes Payer <hpayer@chromium.org>
> Commit-Queue: Ulan Degenbaev <ulan@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#52184}
TBR=ulan@chromium.org,hpayer@chromium.org
Change-Id: I1a98c070cee4039a1ef7851fcabd32d56d0629fe
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:824214
Reviewed-on: https://chromium-review.googlesource.com/977973
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52192}
This eases transition handlers caching and avoids memory overhead of
respective StoreHandler objects. In addition, it allows to use such
transition handlers on runtime side to make Object.assign implementation
a bit faster.
Bug: v8:5988
Change-Id: Iba660a11d4b300cd5f80615fb7e2608e53da8fee
Reviewed-on: https://chromium-review.googlesource.com/931701
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52187}
This patch also fixes MaxReserved() to accound for page headers and
adds two tests for heap size and memory allocator size near OOM.
Bug: chromium:824214
Change-Id: I5bbe00a9d6a5798cdf4481861a10dca842244a63
Reviewed-on: https://chromium-review.googlesource.com/973614
Reviewed-by: Hannes Payer <hpayer@chromium.org>
Commit-Queue: Ulan Degenbaev <ulan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52184}
Also add a new fast-path for String.fromCodePoint.
R=neis@chromium.org
Bug: v8:7570, v8:7340
Change-Id: I6cd6e6fc98943588ecd646f24fcda043d4033ab0
Reviewed-on: https://chromium-review.googlesource.com/978244
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Sigurd Schneider <sigurds@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52183}
This CL also cleans up some related naming in typed-optimization.
R=neis@chromium.org
Bug: v8:7531, v8:7570
Change-Id: If80e0e9642aaf6c58b164db2e1e0632cd5b0d051
Reviewed-on: https://chromium-review.googlesource.com/978066
Commit-Queue: Sigurd Schneider <sigurds@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52182}
This moves source position tables associated with WasmCode objects to be
located outside the garbage-collected heap. There now is a clear link to
the source position table from code, making the one-to-one relationship
and its lifetime explicit.
R=ahaas@chromium.org
BUG=v8:7424
Change-Id: I9d0b332732508c302ba525059ef02559f45aa2f6
Reviewed-on: https://chromium-review.googlesource.com/975565
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52178}
Moves RO_SPACE to the front of the AllocationSpace enum, so the space
pre-allocation iterations don't miss it. Being at the start of the enum
means that it continues to not be iterated over by any sweeper code,
which iterates from FIRST_GROWABLE_PAGED_SPACE to
LAST_GROWABLE_PAGED_SPACE (renamed from FIRST_PAGED_SPACE and
LAST_PAGED_SPACE).
Bug: v8:7464
Change-Id: I480ba784afbd878552d1cb7f9f5fa57c3b55e004
Reviewed-on: https://chromium-review.googlesource.com/973604
Commit-Queue: Dan Elphick <delphick@chromium.org>
Reviewed-by: Hannes Payer <hpayer@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52177}
When using trap handlers, memory references do not get any checks inserted. This
means there is no check for a null memory as happens when the memory size is
0. Normally this would be correctly caught as an out of bounds access, since the
low memory addresses are not normally mapped. However, if they were mapped for
some reason, we would not catch the out of bounds access.
The fix is to ensure WebAssembly instances always have a guard region even if
the memory is size 0.
This is a rewrite of 5e76ff5a4a
Note that this can lead to a large amount of unnecessary address space usage,
so we share a single reservation for empty array buffers.
Bug: chromium:769637
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng
Change-Id: Ia8e84be6d595e347d3d342959f2c374db1a3f683
Reviewed-on: https://chromium-review.googlesource.com/702657
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Eric Holk <eholk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52163}
On float comparisons, we need a scratch byte register for the setcc
instruction, and if none is available, we spill. But this spilling code
is skipped if one of the operands is NaN. The cache state is updated
however, so following code assumes that the spill happened.
This CL fixes this by spilling before checking for NaN, such that the
spilling code is always executed.
R=titzer@chromium.org
Bug: v8:7582, v8:6600
Change-Id: I768d8de14e494d3ebea181c1f9f3129a4b005396
Reviewed-on: https://chromium-review.googlesource.com/973961
Reviewed-by: Ben Titzer <titzer@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52162}
This is a reland of d8f564eac6TBR=mstarzinger@chromium.org,yangguo@chromium.org,jgruber@chromium.org
Original change's description:
> Reland: Remove SFI code field
>
> Remove the SharedFunctionInfo code field, inferring the code object
> from the function_data field instead. In some cases, the function_data
> field can now hold a Code object (e.g. some WASM cases).
>
> (Reland of https://chromium-review.googlesource.com/952452)
>
> TBR=mstarzinger@chromium.org
>
> Bug: chromium:783853
> Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng
> Change-Id: I10ea5be7ceed1b51362a2fad9be7397624d69343
> Reviewed-on: https://chromium-review.googlesource.com/970649
> Commit-Queue: Leszek Swirski <leszeks@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Reviewed-by: Jakob Gruber <jgruber@chromium.org>
> Reviewed-by: Leszek Swirski <leszeks@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#52136}
Bug: chromium:783853
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I5187851b923e9a92f43daf8cb99e662786cbb839
Reviewed-on: https://chromium-review.googlesource.com/975942
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52159}
This is a reland of ed2605f040
Original change's description:
> [d8][wasm] Test wasm compilation completion
>
> d8 was recently changed to keep running until wasm compilation has
> completed. This adds a message test to test that.
>
> R=ahaas@chromium.org
>
> Change-Id: I73af53b6df4ee5f9a6afd26cf2d71a269140465f
> Reviewed-on: https://chromium-review.googlesource.com/966184
> Reviewed-by: Andreas Haas <ahaas@chromium.org>
> Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#52008}
Change-Id: Iadbd5056dfa58da454956c4e89369af8b0455b35
Reviewed-on: https://chromium-review.googlesource.com/975242
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52154}
SuspendGenerator needs the accumulator to be live so that it can return
it.
Bug: chromium:806723
Change-Id: Iaa88fce96c36876e3e4256324ca650d475480c10
Reviewed-on: https://chromium-review.googlesource.com/975404
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52147}
Delaying the logging until after module creating ensures that the
module has been fully parsed and hence that all names are available.
Also refactors the code to bring all code logging/disassembling into
one place.
Change-Id: I8219d70876d2ccd3a5ffb8250b46fdf60a46fe6c
Reviewed-on: https://chromium-review.googlesource.com/973443
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Stephan Herhut <herhut@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52146}
See referenced bug: Async compilation can deadlock if a background task
queues the last compilation unit to be finished while the finisher
is already exiting because there was no more work.
This CL fixes this by making the finisher task check for new work after
setting the finisher_is_running_ flag to false.
R=ahaas@chromium.orgCC=kimanh@google.com
Bug: chromium:824681
Change-Id: If1f5700a9fdd5d150b36e37a5d14b692c2b0f3fb
Reviewed-on: https://chromium-review.googlesource.com/975301
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52139}
Mostly cosmetic changes. The biggest change is to encode block result
types using symbolic names instead of hex numbers.
R=ahaas@chromium.org
Change-Id: Ic0e6eccf687338e68508094168ddd70734cef301
Reviewed-on: https://chromium-review.googlesource.com/973527
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52138}
Remove the SharedFunctionInfo code field, inferring the code object
from the function_data field instead. In some cases, the function_data
field can now hold a Code object (e.g. some WASM cases).
(Reland of https://chromium-review.googlesource.com/952452)
TBR=mstarzinger@chromium.org
Bug: chromium:783853
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng
Change-Id: I10ea5be7ceed1b51362a2fad9be7397624d69343
Reviewed-on: https://chromium-review.googlesource.com/970649
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52136}
In Promise.all we used to allocate a fresh closure plus a fresh context
for each individual element, which is quite a lot of overhead, especially
since this could be shared in a single context for all elements. The only
bit of information that is needed for each resolve element closure is the
index under which to store the resulting value. With this change we move
this index to the "identity hash" field of the JSFunction, which doesn't
care about the concrete value anyways, as long as it's not zero (the "no
hash" sentinel), and share the rest of the fields in a single outer
context for all resolve element closures.
This limits the maximum number of elements for Promise.all to 2^21 for
now, but that should be fine. Shall we ever see the need for more than
this, we can add machinery to overflow to separate context for indices
larger than 2^21.
This significantly reduces the overhead due to Promise.all on the
parallel-async-es2017-native test, with execution time dropping from
around 148ms to 133ms, so overall a steady 10% improvement on this
benchmark.
Bug: v8:7253
Change-Id: I1092da771c4919f3db7129d2b0a244fc26a7b144
Reviewed-on: https://chromium-review.googlesource.com/973283
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52134}
Fix up disassembly triggered by --print-*-code to print to the trace
file specified by --redirect-code-traces-to rather than unconditionally
to stdout.
Change-Id: I80a8772361e8fb0550efcbbab6a7b7d822385303
Reviewed-on: https://chromium-review.googlesource.com/973167
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52119}
On ia32, the upper "half stack slot" must be located above the lower
half stack slot (in absolute address), hence the index is
"2 * index - 1" instead of "2 * index + 1". Note that the index
describes the negative offset from the stack pointer.
R=titzer@chromium.org
Bug: v8:7579
Change-Id: If207af405b126ab30043432d7934273e6e2a5330
Reviewed-on: https://chromium-review.googlesource.com/973301
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52116}
Some debugging tests relied on the following anti-pattern:
let exception = false;
try {
/* ... some code that may throw on test failure ... */
} catch (e) {
exception = e;
}
assertFalse(exception);
This may be problematic if a falseish value is thrown.
Change-Id: I02eace4cc656fc9581928a90ac53cda4dc72b30c
Reviewed-on: https://chromium-review.googlesource.com/972822
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52105}
The multi-return tests and fuzzer used a custom call descriptor which
was based on the default RegisterConfiguration. This meant that for the
tests, all available registers could be used to pass parameters and to
return values. This caused a problem, because in some cases we need a
scratch register in the frame deconstruction.
With this CL I change both the tests and the fuzzer to use the
WebAssembly call descriptor. Thereby we only use 2 registers for
returns, and one of the other registers can be used as scratch
register.
WebAssembly is the only use case at the moment which wants to return
values not only through registers but also over the stack. Therefore
I think it's acceptable to only test the WebAssembly usecase.
R=mstarzinger@chromium.org
Bug: chromium:813288
Change-Id: I31bed757af5f3e8589d2b3dfb6f0112ddecd1a20
Reviewed-on: https://chromium-review.googlesource.com/970656
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52099}
Embedded builtins are now based off the v8_enable_embedded_builtins
gn flag instead, which conditionally defines V8_EMBEDDED_BUILTINS.
Bug: v8:6666
Change-Id: I44d40d30fce3a3ed9bbf973d46c4990ba3fade40
Reviewed-on: https://chromium-review.googlesource.com/964361
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52092}
The new API supersedes the old `RegisterDefaultSignalHandler` and flag
combination. Now the embedder must explicitly call
`EnableWebAssemblyTrapHandler` to activate the trap handler and optionally
install the default signal handler. The old flag is now used only by D8 to
decide whether to call this function.
Bug: v8:5277
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng
Change-Id: I05fbb2138138bfc95b14361aabd712db84789b4a
Reviewed-on: https://chromium-review.googlesource.com/963179
Commit-Queue: Eric Holk <eholk@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52081}
This moves the Wasm-specific metadata from being fields on the
ArrayBuffer into a table managed by WasmMemoryTracker.
Bug: chromium:776273
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng
Change-Id: Id8b050bfdfe0fbe9436fb055e92c08d503d3c2ba
Reviewed-on: https://chromium-review.googlesource.com/850550
Commit-Queue: Eric Holk <eholk@chromium.org>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52080}
src/base/debug/stack_trace_posix.cc: suppressed unused function warnings
for functions DemangleSymbols, OutputPointer(in order to compile with
-Werror flag)
test/cctest/test-isolate-independent-builtins.cc: corrections to make
ByteInText test case compatible with aix. (affects aix only)
Change-Id: I49e45e63545404c77aaed3f51b26557f6f03455e
Reviewed-on: https://chromium-review.googlesource.com/927484
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52071}
The embedders should use the EmbedderGraph API. The similar structure
can be created with the following steps:
1) Create a root node for each retainer info group.
2) Iterate all handles using Isolate::VisitHandlesWithClassIds.
3) Add an edge from the retainer info node to the v8 wrapper node.
4) Add an edge from the v8 wrapper node to the retainer info node.
See how HeapSnapshotRetainedObjectInfo is converted to the new API.
Bug: chromium:749490
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng
Change-Id: I124ae3853354863b4f888e6aa2ea13777dcaa37d
Reviewed-on: https://chromium-review.googlesource.com/948842
Commit-Queue: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52067}
Remove the SharedFunctionInfo code field, inferring the code object
from the function_data field instead. In some cases, the function_data
field can now hold a Code object (e.g. some WASM cases).
Bug: chromium:783853
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng
Change-Id: I1219a4d6aa5abaa9fee54dda883da7a3186e347a
Reviewed-on: https://chromium-review.googlesource.com/952452
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52064}
In general, TurboFan doesn't encounter phi nodes with only a single
data input in the backend. However, CSA-based builtins (especially
auto-generated ones, e.g. from Torque), may contain single-input phi nodes,
although outside the auto-generated case this doesn't happen much in practice.
Single input phi nodes (i.e. phis in blocks with one predecessor) don't have
any side effects and are essentially useless and harmless, but to avoid problems
in the backend of TurboFan (whose SSA deconstruction disallows control flow
splits that continue to blocks with phis), this CL tweaks the existing
CSA-only control flow and graph sanitization in the CSA path to ensure
no no-op phis.
Change-Id: I109f4dc6cde5ad1794585a09609a230b1848e0d5
Reviewed-on: https://chromium-review.googlesource.com/963711
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Daniel Clifford <danno@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52056}
