The new object will hold information which is shared by all clones of a
WasmCompiledModule, e.g. the decoded asm.js offset table, and in the
future also breakpoints. From there, we can set them on each new
instantiation of any clone.
While already changing lots of the code base, I also renamed all
getters from "get_foo" to "foo", to conform to the style guide.
R=titzer@chromium.org, yangguo@chromium.org
BUG=v8:5732
Review-Url: https://codereview.chromium.org/2591653002
Cr-Commit-Position: refs/heads/master@{#41862}
This CL implements GetPossibleBreakpoints for wasm, by iterating over
all functions in the requested range and returning the location of all
instructions within that range.
The connection to the inspector will be added later, when setting
breakpoint also works for wasm: http://crrev.com/2536763002
BUG=chromium:613110
R=titzer@chromium.org
Review-Url: https://codereview.chromium.org/2588763002
Cr-Commit-Position: refs/heads/master@{#41818}
When executing wasm code for testing, we did not create a
WasmInstanceObject and link it to the generated code. This required
some special handling at runtime (mainly for stack trace generation).
This CL always provides the WasmInstanceObject, such that e.g. function
names can be resolved the usual way.
The module bytes referenced by the WasmCompiledModule linked with the
WasmInstanceObject do not hold a valid wasm module yet. Instead, we
just add the bytes we need, and make the objects in WasmModule point to
those bytes (currently only used for function names). Those bytes will
not be parsed at runtime anyway.
R=titzer@chromium.orgCC=jgruber@chromium.org
BUG=v8:5620
Review-Url: https://codereview.chromium.org/2551053002
Cr-Commit-Position: refs/heads/master@{#41809}
The WasmRunner now always holds a TestingModule, and allows to add
several functions to it. The prepares a change to always run wasm code
with a full module behind it, removing the special handling for "no wasm
instance" at runtime (http://crrev.com/2551053002).
This CL here also templatizes the WasmRunner such that the Call method must
be called with the same signature specified for the WasmRunner. This
already catched several mismatches there.
R=titzer@chromium.org, ahaas@chromium.org
BUG=v8:5620
Review-Url: https://codereview.chromium.org/2551043002
Cr-Original-Commit-Position: refs/heads/master@{#41728}
Committed: 2ff5906231
Review-Url: https://codereview.chromium.org/2551043002
Cr-Commit-Position: refs/heads/master@{#41747}
Reason for revert:
Win64 dbg failures
Original issue's description:
> [wasm] Make WasmRunner the central test structure
>
> The WasmRunner now always holds a TestingModule, and allows to add
> several functions to it. The prepares a change to always run wasm code
> with a full module behind it, removing the special handling for "no wasm
> instance" at runtime (http://crrev.com/2551053002).
> This CL here also templatizes the WasmRunner such that the Call method must
> be called with the same signature specified for the WasmRunner. This
> already catched several mismatches there.
>
> R=titzer@chromium.org, ahaas@chromium.org
> BUG=v8:5620
>
> Review-Url: https://codereview.chromium.org/2551043002
> Cr-Commit-Position: refs/heads/master@{#41728}
> Committed: 2ff5906231TBR=ahaas@chromium.org,titzer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5620
Review-Url: https://codereview.chromium.org/2583543002
Cr-Commit-Position: refs/heads/master@{#41732}
The WasmRunner now always holds a TestingModule, and allows to add
several functions to it. The prepares a change to always run wasm code
with a full module behind it, removing the special handling for "no wasm
instance" at runtime (http://crrev.com/2551053002).
This CL here also templatizes the WasmRunner such that the Call method must
be called with the same signature specified for the WasmRunner. This
already catched several mismatches there.
R=titzer@chromium.org, ahaas@chromium.org
BUG=v8:5620
Review-Url: https://codereview.chromium.org/2551043002
Cr-Commit-Position: refs/heads/master@{#41728}
Some instructions in WebAssembly trap for some inputs, which means that the
execution is terminated and (at least at the moment) a JavaScript exception is
thrown. Examples for traps are out-of-bounds memory accesses, or integer
divisions by zero.
Without the TrapIf and TrapUnless operators trap check in WebAssembly introduces 5
TurboFan nodes (branch, if_true, if_false, trap-reason constant, trap-position
constant), in addition to the trap condition itself. Additionally, each
WebAssembly function has four TurboFan nodes (merge, effect_phi, 2 phis) whose
number of inputs is linear to the number of trap checks in the function.
Especially for functions with high numbers of trap checks we observe a
significant slowdown in compilation time, down to 0.22 MiB/s in the sqlite
benchmark instead of the average of 3 MiB/s in other benchmarks. By introducing
a TrapIf common operator only a single node is necessary per trap check, in
addition to the trap condition. Also the nodes which are shared between trap
checks (merge, effect_phi, 2 phis) would disappear. First measurements suggest a
speedup of 30-50% on average.
This CL only implements TrapIf and TrapUnless on x64. The implementation is also
hidden behind the --wasm-trap-if flag.
Please take a special look at how the source position is transfered from the
instruction selector to the code generator, and at the context that is used for
the runtime call.
R=titzer@chromium.org
Review-Url: https://codereview.chromium.org/2562393002
Cr-Commit-Position: refs/heads/master@{#41720}
In the asm.js code translated to wasm, we call imported functions via a
WASM_TO_JS stub, which first calls the function and then calls ToNumber
on the return value. Exceptions can happen in both calls.
We were only ever reporting the location of the function call, whereas
asm.js code executed via turbofan reported the location of the type
coercion operator ("+" on "+foo()" or "|" on "foo()|0").
This CL implements the same behaviour for asm.js code translated to
wasm. The following is changed:
- the AsmWasmBuilder records the parent node when descending on a binary
operator (also "+foo()" is represented by a binary operation).
- it stores not one location per call in the source position side
table, but two (one for the call, one for the parent which does the
type coercion).
- the wasm compiler annotates the source positions "0" and "1" to the
two calls in the WASM_TO_JS wrapper (only if the module origin is
asm.js).
- the StackFrame::State struct now also holds the callee_pc_address,
which is set in ComputeCallerState. The WASM frame uses this
information to determine whether the callee frame is WASM_TO_JS, and
whether that frame is at the ToNumber conversion call.
- the same information is also stored in the FrameArray which is used
to reconstruct the stack trace later.
R=titzer@chromium.org, bradnelson@chromium.orgCC=jgruber@chromium.org
BUG=v8:4203,v8:5724
Committed: https://crrev.com/94cd46b55e24fa2bb7b06b3da4d5ba7f029bc262
Review-Url: https://codereview.chromium.org/2555243002
Cr-Original-Commit-Position: refs/heads/master@{#41599}
Cr-Commit-Position: refs/heads/master@{#41613}
Reason for revert:
gc-stress failures
Original issue's description:
> [wasm] Fix location for error in asm.js ToNumber conversion
>
> In the asm.js code translated to wasm, we call imported functions via a
> WASM_TO_JS stub, which first calls the function and then calls ToNumber
> on the return value. Exceptions can happen in both calls.
> We were only ever reporting the location of the function call, whereas
> asm.js code executed via turbofan reported the location of the type
> coercion operator ("+" on "+foo()" or "|" on "foo()|0").
>
> This CL implements the same behaviour for asm.js code translated to
> wasm. The following is changed:
> - the AsmWasmBuilder records the parent node when descending on a binary
> operator (also "+foo()" is represented by a binary operation).
> - it stores not one location per call in the source position side
> table, but two (one for the call, one for the parent which does the
> type coercion).
> - the wasm compiler annotates the source positions "0" and "1" to the
> two calls in the WASM_TO_JS wrapper (only if the module origin is
> asm.js).
> - during stack trace generation (in the StackTraceIterator), when we
> move from the WASM_TO_JS frame to the WASM frame, we remember at which
> call inside the WASM_TO_JS wrapper we are, and encode this information
> in the generated caller state, used for the WASM frame.
> - the same information is also stored in the FrameArray which is used
> to reconstruct the stack trace later.
>
> R=titzer@chromium.org, bradnelson@chromium.org
> CC=jgruber@chromium.org
> BUG=v8:4203,v8:5724
>
> Committed: https://crrev.com/94cd46b55e24fa2bb7b06b3da4d5ba7f029bc262
> Cr-Commit-Position: refs/heads/master@{#41599}
TBR=bradnelson@chromium.org,mstarzinger@chromium.org,titzer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4203,v8:5724
Review-Url: https://codereview.chromium.org/2563613003
Cr-Commit-Position: refs/heads/master@{#41601}
In the asm.js code translated to wasm, we call imported functions via a
WASM_TO_JS stub, which first calls the function and then calls ToNumber
on the return value. Exceptions can happen in both calls.
We were only ever reporting the location of the function call, whereas
asm.js code executed via turbofan reported the location of the type
coercion operator ("+" on "+foo()" or "|" on "foo()|0").
This CL implements the same behaviour for asm.js code translated to
wasm. The following is changed:
- the AsmWasmBuilder records the parent node when descending on a binary
operator (also "+foo()" is represented by a binary operation).
- it stores not one location per call in the source position side
table, but two (one for the call, one for the parent which does the
type coercion).
- the wasm compiler annotates the source positions "0" and "1" to the
two calls in the WASM_TO_JS wrapper (only if the module origin is
asm.js).
- during stack trace generation (in the StackTraceIterator), when we
move from the WASM_TO_JS frame to the WASM frame, we remember at which
call inside the WASM_TO_JS wrapper we are, and encode this information
in the generated caller state, used for the WASM frame.
- the same information is also stored in the FrameArray which is used
to reconstruct the stack trace later.
R=titzer@chromium.org, bradnelson@chromium.orgCC=jgruber@chromium.org
BUG=v8:4203,v8:5724
Review-Url: https://codereview.chromium.org/2555243002
Cr-Commit-Position: refs/heads/master@{#41599}
These byte pointers (module_start and module_end) were only valid
during decoding. During instantiation or execution, they can get
invalidated by garbage collection.
This CL removes them from the WasmModule struct, and introduces a new
ModuleStorage struct as interface to the wasm wire bytes.
Since the storage is often needed together with the ModuleEnv, a new
ModuleStorageEnv struct holds both a ModuleEnv and a ModuleStorage.
The pointers in the ModuleStorage should never escape the live range of
this struct, as they might point into a SeqOneByteString or ArrayBuffer.
Therefore, the WasmInterpreter needs to create its own copy of the
whole module.
Runtime functions that previously used the raw pointers in WasmModule
(leading to memory errors) now have to use the SeqOneByteString in the
WasmCompiledModule.
R=titzer@chromium.org
BUG=chromium:669518
Review-Url: https://codereview.chromium.org/2540133002
Cr-Commit-Position: refs/heads/master@{#41388}
SourcePosition::InliningId() refers to a the new table DeoptimizationInputData::InliningPositions(), which provides the following data for every inlining id:
- The inlined SharedFunctionInfo as an offset into DeoptimizationInfo::LiteralArray
- The SourcePosition of the inlining. Recursively, this yields the full inlining stack.
Before the Code object is created, the same information can be found in CompilationInfo::inlined_functions().
If SourcePosition::InliningId() is SourcePosition::kNotInlined, it refers to the outer (non-inlined) function.
So every SourcePosition has full information about its inlining stack, as long as the corresponding Code object is known. The internal represenation of a source position is a positive 64bit integer.
All compilers create now appropriate source positions for inlined functions. In the case of Turbofan, this required using AstGraphBuilderWithPositions for inlined functions too. So this class is now moved to a header file.
At the moment, the additional information in source positions is only used in --trace-deopt and --code-comments. The profiler needs to be updated, at the moment it gets the correct script offsets from the deopt info, but the wrong script id from the reconstructed deopt stack, which can lead to wrong outputs. This should be resolved by making the profiler use the new inlining information for deopts.
I activated the inlined deoptimization tests in test-cpu-profiler.cc for Turbofan, changing them to a case where the deopt stack and the inlining position agree. It is currently still broken for other cases.
The following additional changes were necessary:
- The source position table (internal::SourcePositionTableBuilder etc.) supports now 64bit source positions. Encoding source positions in a single 64bit int together with the difference encoding in the source position table results in very little overhead for the inlining id, since only 12% of the source positions in Octane have a changed inlining id.
- The class HPositionInfo was effectively dead code and is now removed.
- SourcePosition has new printing and information facilities, including computing a full inlining stack.
- I had to rename compiler/source-position.{h,cc} to compiler/compiler-source-position-table.{h,cc} to avoid clashes with the new src/source-position.cc file.
- I wrote the new wrapper PodArray for ByteArray. It is a template working with any POD-type. This is used in DeoptimizationInputData::InliningPositions().
- I removed HInlinedFunctionInfo and HGraph::inlined_function_infos, because they were only used for the now obsolete Crankshaft inlining ids.
- Crankshaft managed a list of inlined functions in Lithium: LChunk::inlined_functions. This is an analog structure to CompilationInfo::inlined_functions. So I removed LChunk::inlined_functions and made Crankshaft use CompilationInfo::inlined_functions instead, because this was necessary to register the offsets into the literal array in a uniform way. This is a safe change because LChunk::inlined_functions has no other uses and the functions in CompilationInfo::inlined_functions have a strictly longer lifespan, being created earlier (in Hydrogen already).
BUG=v8:5432
Review-Url: https://codereview.chromium.org/2451853002
Cr-Commit-Position: refs/heads/master@{#40975}
In captured stack traces, all lines and columns must be 1-based.
Even though this makes things a bit ugly, we have to comply also for
wasm locations, where line and column encode function index and byte
offset (both are originally 0-based).
If we don't comply, the frontend might complain, as e.g. DevTools does.
BUG=chromium:659715
R=yangguo@chromium.org, kozyatinskiy@chromium.orgCC=titzer@chromium.org
Review-Url: https://codereview.chromium.org/2493943002
Cr-Commit-Position: refs/heads/master@{#40971}
According to the spec data segments are allowed even if the memory size
is zero. However, if one of the data segments has a length greater than
0, then module instantiation should fail.
I also changed the exception type in LoadDataSegments to TypeError,
because that's the exception type for all exceptions which can happen
during instantiation.
R=titzer@chromium.org, rossberg@chromium.org
TEST=cctest/test-run-wasm-module/EmptyMemoryEmptyDataSegment, cctest/test-run-wasm-module/EmptyMemoryNonEmptyDataSegment
Review-Url: https://codereview.chromium.org/2483053005
Cr-Commit-Position: refs/heads/master@{#40922}
This CL moves all heap-allocated WASM data structures, both ones
that are bonafide JSObjects and ones that are FixedArrays only, into a
consistent place with consistent layout. Note that not all accessors are complete, and I haven't fully spread the new static typing goodness
to all places in the code.
R=ahaas@chromium.org,rossberg@chromium.org
CC=gdeepti@chromium.org,mtrofin@chromium.org,clemensh@chromium.org
BUG=
Review-Url: https://codereview.chromium.org/2490663002
Cr-Commit-Position: refs/heads/master@{#40913}
The bounds check in LoadDataSegment was off by one. I also improved the
error message, and fixed an issue where data was initialized even if
the bounds check failed.
In InstantiateModuleForTesting I allow instantiation of modules without
exports. This check was legacy code from the time where instantiation
and execution was still combined in a single function.
R=titzer@chromium.org, rossberg@chromium.org
TEST=cctest/test-run-wasm-module/InitDataAtTheUpperLimit
Review-Url: https://codereview.chromium.org/2486183002
Cr-Commit-Position: refs/heads/master@{#40856}
The spec defines that indirect calls in WebAssembly code should cause a
validation error if no function table exists.
The CL contains the following changes:
1) Throw a validation error for indirect calls if the function table
not exist.
2) Do not create TF nodes to throw a runtime error for indirect calls
if the function table does not exist.
3) Fix existing unit tests by creating a dummy function table.
4) Add new a new test which tests that indirect calls without function
table cause a validation error.
R=rossberg@chromium.orgCC=titzer@chromium.org
TEST=unittests/AstDecoderTest.IndirectCallsWithoutTableCrash
Review-Url: https://codereview.chromium.org/2484623002
Cr-Commit-Position: refs/heads/master@{#40852}
We handle this case specially because otherwise we would have to do
complicated overflow detection.
R=titzer@chromium.org
TEST=cctest/test-run-wasm/RunWasmCompiled_LoadMaxUint32Offset
Review-Url: https://codereview.chromium.org/2490533003
Cr-Commit-Position: refs/heads/master@{#40844}
The memory leak is fixed by calling the GC at the end of the tests. The GC collects the WasmModuleWrapper objects, which deallocates WasmModule c++ object. For the mjsunit tests the GC is already called because of the --invoke_weak_callbacks flag.
BUG=chromium:662388
Review-Url: https://codereview.chromium.org/2476643003
Cr-Commit-Position: refs/heads/master@{#40822}
Reason for revert:
Speculative revert for blocking roll:
https://codereview.chromium.org/2479233002/
Original issue's description:
> [wasm] Indirect calls without function table cause validation errors.
>
> The spec defines that indirect calls in WebAssembly code should cause a
> validation error if no function table exists.
>
> The CL contains the following changes:
> 1) Throw a validation error for indirect calls if the function table
> not exist.
> 2) Do not create TF nodes to throw a runtime error for indirect calls
> if the function table does not exist.
> 3) Fix existing unit tests by creating a dummy function table.
> 4) Add new a new test which tests that indirect calls without function
> table cause a validation error.
>
> R=rossberg@chromium.org
> CC=titzer@chromium.org
>
> TEST=unittests/AstDecoderTest.IndirectCallsWithoutTableCrash
TBR=rossberg@chromium.org,titzer@chromium.org,ahaas@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review-Url: https://codereview.chromium.org/2479283002
Cr-Commit-Position: refs/heads/master@{#40811}
The spec defines that indirect calls in WebAssembly code should cause a
validation error if no function table exists.
The CL contains the following changes:
1) Throw a validation error for indirect calls if the function table
not exist.
2) Do not create TF nodes to throw a runtime error for indirect calls
if the function table does not exist.
3) Fix existing unit tests by creating a dummy function table.
4) Add new a new test which tests that indirect calls without function
table cause a validation error.
R=rossberg@chromium.orgCC=titzer@chromium.org
TEST=unittests/AstDecoderTest.IndirectCallsWithoutTableCrash
Review-Url: https://codereview.chromium.org/2484623002
Cr-Commit-Position: refs/heads/master@{#40802}
The wasm interpreter crashed because it interpreted the table of
br_table as a table of uint8, but according to the spec it is a table of
varint32. Therefore the wasm interpreter misinterpreted 0x80 0x00 as 128
and not as 0, which caused a crash.
R=tizer@chromium.org
BUG=chromium:660262
TEST=cctest/test-run-wasm/RunWasmInterpreted_Regression_660262
Review-Url: https://codereview.chromium.org/2463063002
Cr-Commit-Position: refs/heads/master@{#40708}
This is preparation for using TF to create builtins that handle variable number of
arguments and have to remove these arguments dynamically from the stack upon
return.
The gist of the changes:
- Added a second argument to the Return node which specifies the number of stack
slots to pop upon return in addition to those specified by the Linkage of the
compiled function.
- Removed Tail -> Non-Tail fallback in the instruction selector. Since TF now should
handles all tail-call cases except where the return value type differs, this fallback
was not really useful and in fact caused unexpected behavior with variable
sized argument popping, since it wasn't possible to materialize a Return node
with the right pop count from the TailCall without additional context.
- Modified existing Return generation to pass a constant zero as the additional
pop argument since the variable pop functionality
LOG=N
Review-Url: https://codereview.chromium.org/2446543002
Cr-Commit-Position: refs/heads/master@{#40699}
Reason for revert:
Seems to break arm64 sim debug and blocks roll:
https://build.chromium.org/p/client.v8.ports/builders/V8%20Linux%20-%20arm64%20-%20sim%20-%20debug/builds/3294
Original issue's description:
> [turbofan] Support variable size argument removal in TF-generated functions
>
> This is preparation for using TF to create builtins that handle variable number of
> arguments and have to remove these arguments dynamically from the stack upon
> return.
>
> The gist of the changes:
> - Added a second argument to the Return node which specifies the number of stack
> slots to pop upon return in addition to those specified by the Linkage of the
> compiled function.
> - Removed Tail -> Non-Tail fallback in the instruction selector. Since TF now should
> handles all tail-call cases except where the return value type differs, this fallback
> was not really useful and in fact caused unexpected behavior with variable
> sized argument popping, since it wasn't possible to materialize a Return node
> with the right pop count from the TailCall without additional context.
> - Modified existing Return generation to pass a constant zero as the additional
> pop argument since the variable pop functionality
>
> LOG=N
TBR=bmeurer@chromium.org,mstarzinger@chromium.org,epertoso@chromium.org,danno@chromium.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
NOPRESUBMIT=true
Review-Url: https://codereview.chromium.org/2473643002
Cr-Commit-Position: refs/heads/master@{#40691}
This is preparation for using TF to create builtins that handle variable number of
arguments and have to remove these arguments dynamically from the stack upon
return.
The gist of the changes:
- Added a second argument to the Return node which specifies the number of stack
slots to pop upon return in addition to those specified by the Linkage of the
compiled function.
- Removed Tail -> Non-Tail fallback in the instruction selector. Since TF now should
handles all tail-call cases except where the return value type differs, this fallback
was not really useful and in fact caused unexpected behavior with variable
sized argument popping, since it wasn't possible to materialize a Return node
with the right pop count from the TailCall without additional context.
- Modified existing Return generation to pass a constant zero as the additional
pop argument since the variable pop functionality
LOG=N
Review-Url: https://codereview.chromium.org/2446543002
Cr-Commit-Position: refs/heads/master@{#40678}
The wasm specification does not fully specify the binary representation
of NaN: the sign bit can be non-deterministic. The wasm-code fuzzer
found a test case where the wasm interpreter and the compiled code
produce a different sign bit for a NaN, and as a consequence they
produce different results.
With this CL the interpreter tracks whether it executed an instruction
which can produce a NaN, which are div and sqrt instructions. The
fuzzer uses this information and compares the result of the interpreter
with the result of the compiled code only if there was no instruction
which could have produced a NaN.
R=titzer@chromium.org
TEST=cctest/test-run-wasm-interpreter/TestMayProduceNaN
BUG=chromium:657481
Review-Url: https://chromiumcodereview.appspot.com/2438603003
Cr-Commit-Position: refs/heads/master@{#40474}
This CL refactors the handling of metadata associated with WebAssembly
modules to reduce the duplicate marshalling of data from the C++ world
to the JavaScript world. It does this by wrapping the C++ WasmModule*
object in a Foreign that is rooted from the on-heap WasmCompiledModule
(which is itself just a FixedArray). Upon serialization, the C++ object
is ignored and the original WASM wire bytes are serialized. Upon
deserialization, the C++ object is reconstituted by reparsing the bytes.
This is motivated by increasing complications in implementing the JS
API, in particular WebAssembly.Table, which must perform signature
canonicalization across instances.
Additionally, this CL implements the proper base + offset initialization
behavior for tables.
R=rossberg@chromium.org,bradnelson@chromium.org,mtrofin@chromium.org,yangguo@chromium.org
BUG=v8:5507, chromium:575167, chromium:657316
Review-Url: https://chromiumcodereview.appspot.com/2424623002
Cr-Commit-Position: refs/heads/master@{#40434}
This adds more useful information to the v8-heap-stats tool.
BUG=v8:5489
Review-Url: https://codereview.chromium.org/2394213003
Cr-Commit-Position: refs/heads/master@{#40361}
Use sparingly!
This doesn't add any really new functionality, other than making it more
convenient to do this.
This will primarily be used to wrap a WasmModule to be referenced from a
JSObject that represents an instance. There is one WasmModule C++ object
per parsed WasmModule, so this should not be more than a handful or a few
dozen in well-behaved programs.
R=rossberg@chromium.org,mlippautz@chromium.org
BUG=
Review-Url: https://codereview.chromium.org/2409173005
Cr-Commit-Position: refs/heads/master@{#40346}
A test where the deserialization data has a header, but the
header is invalid. This is in addition to the current test
where we have empty deserialization data.
BUG=
Review-Url: https://codereview.chromium.org/2418483002
Cr-Commit-Position: refs/heads/master@{#40321}
This incorporates recent feedback:
- simpler deserialization API by dropping the std::unique_ptr.
The only purpose there was communicating to the caller that they
own the buffer, and that the deserializer won't delete it. The new
design communicates that through a naming choice.
- renamed *UncompiledBytes to *WasmWireBytes
BUG=
Review-Url: https://codereview.chromium.org/2411263004
Cr-Commit-Position: refs/heads/master@{#40238}
This is needed for the asm.js -> WASM pipeline. A single exported
function is exported as __single_function__, but we still want to see
the correct function name on the stack, so the underlying wasm function
has to carry the original name.
R=ahaas@chromium.org, titzer@chromium.org
BUG=v8:4203
Review-Url: https://codereview.chromium.org/2406133003
Cr-Commit-Position: refs/heads/master@{#40159}
Updated the deserialization API to avoid copying uncompiled
bytes.
BUG=
Review-Url: https://codereview.chromium.org/2404673002
Cr-Commit-Position: refs/heads/master@{#40108}
One step closer to the informally-agreed upon specification
that structured cloning will always succeed, meaning, if
we fail to deserialize (e.g. because version mismatch in
serialized format and v8 version), we recompile.
As part of this work, the deserializer will need to become
more resilient to invalid input data, and fail graciously
rather than CHECK-ing. This CL addresses some of that,
sufficient to unblock the current serialization tests.
Subsequent CLs will add more testing and the appropriate
fixes.
BUG=639090
Review-Url: https://codereview.chromium.org/2395793003
Cr-Commit-Position: refs/heads/master@{#40058}
Imports and exports in 0xC can be much more than functions, including
tables, memories, and globals. This CL refactors the underlying
organization of imports and exports to support these new import types.
BUG=
Committed: https://crrev.com/599f8a83420346d9cba5ff97bd2a7520468207b6
Review-Url: https://codereview.chromium.org/2390113003
Cr-Original-Commit-Position: refs/heads/master@{#40033}
Cr-Commit-Position: refs/heads/master@{#40050}
Imports and exports in 0xC can be much more than functions, including
tables, memories, and globals. This CL refactors the underlying
organization of imports and exports to support these new import types.
BUG=
Review-Url: https://codereview.chromium.org/2390113003
Cr-Commit-Position: refs/heads/master@{#40033}
The implementation of MemorySize with RelocatableInt32Constants is
problematic if MemorySize is placed close to a GrowMemory instruction in
the code. The use of a runtime function guarantees that the order in
which MemorySize and GrowMemory is executed is correct.
R=titzer@chromium.org
BUG=chromium:651961
TEST=mjsunit/regress/wasm/regression-651961
Committed: https://crrev.com/2c12a9a42d454a36fcd2931fa458d72832eeb689
Review-Url: https://codereview.chromium.org/2386183004
Cr-Original-Commit-Position: refs/heads/master@{#39972}
Cr-Commit-Position: refs/heads/master@{#39980}
Reason for revert:
Patch problem
Original issue's description:
> [wasm] Call a runtime function for a MemorySize instruction.
>
> The implementation of MemorySize with RelocatableInt32Constants is
> problematic if MemorySize is placed close to a GrowMemory instruction in
> the code. The use of a runtime function guarantees that the order in
> which MemorySize and GrowMemory is executed is correct.
>
> R=titzer@chromium.org
> BUG=chromium:651961
> TEST=mjsunit/regress/wasm/regression-651961
>
> Committed: https://crrev.com/2c12a9a42d454a36fcd2931fa458d72832eeb689
> Cr-Commit-Position: refs/heads/master@{#39972}
TBR=titzer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:651961
Review-Url: https://codereview.chromium.org/2391223002
Cr-Commit-Position: refs/heads/master@{#39973}
The implementation of MemorySize with RelocatableInt32Constants is
problematic if MemorySize is placed close to a GrowMemory instruction in
the code. The use of a runtime function guarantees that the order in
which MemorySize and GrowMemory is executed is correct.
R=titzer@chromium.org
BUG=chromium:651961
TEST=mjsunit/regress/wasm/regression-651961
Review-Url: https://codereview.chromium.org/2386183004
Cr-Commit-Position: refs/heads/master@{#39972}
- Store instruction with an offset bigger than GrowMemory offset should handle out of bounds correctly
- Refactor to separate runnning from compile so arguments can be passed in to module builder tests.
BUG=chromium:644670
R=ahaas@chromium.org, titzer@chromium.org
Review-Url: https://codereview.chromium.org/2373613004
Cr-Commit-Position: refs/heads/master@{#39840}
[0xC] Convert to stack machine semantics.
[0xC] Use section codes instead of names.
[0xC] Add elements section decoding.
[0xC] Decoding of globals section.
[0xC] Decoding of memory section.
[0xC] Decoding of imports section.
[0xC] Decoding of exports section.
[0xC] Decoding of data section.
[0xC] Remove CallImport bytecode.
[0xC] Function bodies have an implicit block.
[0xC] Remove the bottom label from loops.
[0xC] Add signatures to blocks.
[0xC] Remove arities from branches.
Add tests for init expression decoding.
Rework compilation of import wrappers and how they are patched.
Rework function indices in debugging.
Fix ASM->WASM builder for stack machine.
Reorganize asm.js foreign functions due to import indices change.
R=ahaas@chromium.org,rossberg@chromium.org,bradnelson@chromium.org
BUG=chromium:575167
LOG=Y
Committed: https://crrev.com/76eb976a67273b8c03c744f64ad850b0432554b9
Review-Url: https://codereview.chromium.org/2345593003
Cr-Original-Commit-Position: refs/heads/master@{#39678}
Cr-Commit-Position: refs/heads/master@{#39795}
Reason for revert:
Main suspect for tsan:
https://build.chromium.org/p/client.v8/builders/V8%20Linux64%20TSAN/builds/11893
Also changes layout tests:
https://build.chromium.org/p/client.v8.fyi/builders/V8-Blink%20Linux%2064/builds/10036
+mips builder:
https://build.chromium.org/p/client.v8.ports/builders/V8%20Mips%20-%20builder/builds/4032
Original issue's description:
> [wasm] Master CL for Binary 0xC changes.
>
> [0xC] Convert to stack machine semantics.
> [0xC] Use section codes instead of names.
> [0xC] Add elements section decoding.
> [0xC] Decoding of globals section.
> [0xC] Decoding of memory section.
> [0xC] Decoding of imports section.
> [0xC] Decoding of exports section.
> [0xC] Decoding of data section.
> [0xC] Remove CallImport bytecode.
> [0xC] Function bodies have an implicit block.
> [0xC] Remove the bottom label from loops.
> [0xC] Add signatures to blocks.
> [0xC] Remove arities from branches.
> Add tests for init expression decoding.
> Rework compilation of import wrappers and how they are patched.
> Rework function indices in debugging.
> Fix ASM->WASM builder for stack machine.
> Reorganize asm.js foreign functions due to import indices change.
>
> R=ahaas@chromium.org,rossberg@chromium.org,bradnelson@chromium.org
> BUG=chromium:575167
> LOG=Y
>
> Committed: https://crrev.com/76eb976a67273b8c03c744f64ad850b0432554b9
> Cr-Commit-Position: refs/heads/master@{#39678}
TBR=ahaas@chromium.org,bradnelson@chromium.org,mtrofin@chromium.org,rossberg@chromium.org,bradnelson@google.com,titzer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:575167
Review-Url: https://codereview.chromium.org/2361053004
Cr-Commit-Position: refs/heads/master@{#39685}
[0xC] Convert to stack machine semantics.
[0xC] Use section codes instead of names.
[0xC] Add elements section decoding.
[0xC] Decoding of globals section.
[0xC] Decoding of memory section.
[0xC] Decoding of imports section.
[0xC] Decoding of exports section.
[0xC] Decoding of data section.
[0xC] Remove CallImport bytecode.
[0xC] Function bodies have an implicit block.
[0xC] Remove the bottom label from loops.
[0xC] Add signatures to blocks.
[0xC] Remove arities from branches.
Add tests for init expression decoding.
Rework compilation of import wrappers and how they are patched.
Rework function indices in debugging.
Fix ASM->WASM builder for stack machine.
Reorganize asm.js foreign functions due to import indices change.
R=ahaas@chromium.org,rossberg@chromium.org,bradnelson@chromium.org
BUG=chromium:575167
LOG=Y
Review-Url: https://codereview.chromium.org/2345593003
Cr-Commit-Position: refs/heads/master@{#39678}
This is some initial cleanup to keep /src clean. The
AccountingAllocator is actually exclusively used by zones and this
common subfolder makes that more clear.
BUG=v8:5409
Review-Url: https://codereview.chromium.org/2344143003
Cr-Commit-Position: refs/heads/master@{#39558}
test-run-wasm-module cctests broken in debug since recent refactoring changes for moving Compilation/Instantiation off the module object (https://codereview.chromium.org/2320723005). The problem here is that SetupIsolateForWasm tries to add the same property to a module_object multiple times and hits a DCHECK when this property is found on a lookup.
- Fixed to use the setup method only once when CcTest::InitIsolateOnce is used.
- Move setup method to test as this is only used for cctests/fuzzers. The install method should take care of this in the regular JS pipeline.
R=mtrofin@chromium.org, ahaas@chromium.org
Review-Url: https://codereview.chromium.org/2342263002
Cr-Commit-Position: refs/heads/master@{#39484}
All parameters passed by reference must be labeled const.
If the object is mutable, then we pass by pointer.
BUG=
Review-Url: https://codereview.chromium.org/2336233006
Cr-Commit-Position: refs/heads/master@{#39451}
The wasm-module-runner is used both in cctests and in fuzzers. As
discussed offline, it is weird to include cctest header files in
fuzzers, so I introduce a new test/common directory which contains the
common files.
R=titzer@chromium.org, jochen@chromium.org
Review-Url: https://codereview.chromium.org/2335193002
Cr-Commit-Position: refs/heads/master@{#39411}
This reverts commit cf5180c3ef. It turns
out finally blocks aren't useful in the current incarnation of Wasm. We
might reintroduce it later.
BUG=
Review-Url: https://codereview.chromium.org/2330073002
Cr-Commit-Position: refs/heads/master@{#39390}
Moved the compilation/instantiation pipeline to work off the
module object (JSObject), making the compiled module data (the
FixedArray) an implementation detail. This:
- simplifies the code by removing duplicate decode->compile->instantiate
sequences
- sets up the stage for "dressing up" the runtime model with
stronger typed APIs
- helps relanding this CL: https://codereview.chromium.org/2305903002/.
It turns out that GCs during the cloning/instantiation events cause
trouble, and centering the source of truth on the module object helps
address this issue.
In the process, clarified cctest setup for wasm-capable isolates,
and changed signatures for consistency (using ModuleOrigin througout).
BUG=
Review-Url: https://codereview.chromium.org/2320723005
Cr-Commit-Position: refs/heads/master@{#39360}
With this CL the wasm-code-fuzzer first decodes and interprets the test
case generated by the fuzzer. It then compiles the test case, but only
executes the compiled instance if the interpretation of the test case
was successful. If the compiled instance is executed, then the result of
the execution is compared with the result of the interpretation.
Additionally this CL refactors the CompileAndRunWasmModule function in
wasm-module.cc to resuse code in the call to the interpreter.
R=titzer@chromium.org
Review-Url: https://codereview.chromium.org/2321443002
Cr-Commit-Position: refs/heads/master@{#39351}
With this CL the AstDecoder produces an error if it encounters a
grow_memory instruction in an asmjs module. Additionally asmjs
instructions are not allowed anymore in wasm modules.
BUG=chromium:644674
R=titzer@chromium.org
Review-Url: https://codereview.chromium.org/2324733002
Cr-Commit-Position: refs/heads/master@{#39339}
This unblocks avoiding the separate code template.
In the upcoming CL doing away with code templates, We need to track instances
through the module object, which needs to be separate from the compiled module
data, which is then shared with the first instance.
This CL ensures we have the object available in the asm.js scenario, too.
Note that this CL also unifies the error messaging when module
decoding fails.
BUG=v8:5316
Review-Url: https://codereview.chromium.org/2299873002
Cr-Commit-Position: refs/heads/master@{#39097}
Adds InterpreterCompilationJob as a sub-class of
CompilationJob, to enable off-thread bytecode
generation. Currently only used in
Interpreter::MakeBytecode.
As part of this change, CompilationJob is modified
to make it less specific to optimized compilation,
renaming the phases as follows:
- CreateGraph -> PrepareJob
- OptimizeGraph -> ExecuteJob
- GenerateCode -> FinalizeJob
RegisterWeakObjectsInOptimizedCode is also moved out
of CompilationJob and instead becomes a static function
on Compiler.
BUG=v8:5203
Committed: https://crrev.com/1fb6a7e697e8bc5b4af51647553741f966e00cdc
Committed: https://crrev.com/785990e9fc0dd9a9d963d25d0bed2909165e4ca9
Committed: https://crrev.com/d7c6195c4c5cdc080caa74dfe2ae9ecab69bea73
Review-Url: https://codereview.chromium.org/2240463002
Cr-Original-Original-Original-Commit-Position: refs/heads/master@{#38662}
Cr-Original-Original-Commit-Position: refs/heads/master@{#38668}
Cr-Original-Commit-Position: refs/heads/master@{#38725}
Cr-Commit-Position: refs/heads/master@{#38778}
Reason for revert:
Revert again...
Original issue's description:
> [Interpreter] Introduce InterpreterCompilationJob
>
> Adds InterpreterCompilationJob as a sub-class of
> CompilationJob, to enable off-thread bytecode
> generation. Currently only used in
> Interpreter::MakeBytecode.
>
> As part of this change, CompilationJob is modified
> to make it less specific to optimized compilation,
> renaming the phases as follows:
> - CreateGraph -> PrepareJob
> - OptimizeGraph -> ExecuteJob
> - GenerateCode -> FinalizeJob
>
> RegisterWeakObjectsInOptimizedCode is also moved out
> of CompilationJob and instead becomes a static function
> on Compiler.
>
> BUG=v8:5203
>
> Committed: https://crrev.com/1fb6a7e697e8bc5b4af51647553741f966e00cdc
> Committed: https://crrev.com/785990e9fc0dd9a9d963d25d0bed2909165e4ca9
> Committed: https://crrev.com/d7c6195c4c5cdc080caa74dfe2ae9ecab69bea73
> Cr-Original-Original-Commit-Position: refs/heads/master@{#38662}
> Cr-Original-Commit-Position: refs/heads/master@{#38668}
> Cr-Commit-Position: refs/heads/master@{#38725}
TBR=mstarzinger@chromium.org,jkummerow@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5203
Review-Url: https://codereview.chromium.org/2260583002
Cr-Commit-Position: refs/heads/master@{#38727}
Adds InterpreterCompilationJob as a sub-class of
CompilationJob, to enable off-thread bytecode
generation. Currently only used in
Interpreter::MakeBytecode.
As part of this change, CompilationJob is modified
to make it less specific to optimized compilation,
renaming the phases as follows:
- CreateGraph -> PrepareJob
- OptimizeGraph -> ExecuteJob
- GenerateCode -> FinalizeJob
RegisterWeakObjectsInOptimizedCode is also moved out
of CompilationJob and instead becomes a static function
on Compiler.
BUG=v8:5203
Committed: https://crrev.com/1fb6a7e697e8bc5b4af51647553741f966e00cdc
Committed: https://crrev.com/785990e9fc0dd9a9d963d25d0bed2909165e4ca9
Review-Url: https://codereview.chromium.org/2240463002
Cr-Original-Original-Commit-Position: refs/heads/master@{#38662}
Cr-Original-Commit-Position: refs/heads/master@{#38668}
Cr-Commit-Position: refs/heads/master@{#38725}
Reason for revert:
Breaks Win64 bot
Original issue's description:
> [Interpreter] Introduce InterpreterCompilationJob
>
> Adds InterpreterCompilationJob as a sub-class of
> CompilationJob, to enable off-thread bytecode
> generation. Currently only used in
> Interpreter::MakeBytecode.
>
> As part of this change, CompilationJob is modified
> to make it less specific to optimized compilation,
> renaming the phases as follows:
> - CreateGraph -> PrepareJob
> - OptimizeGraph -> ExecuteJob
> - GenerateCode -> FinalizeJob
>
> RegisterWeakObjectsInOptimizedCode is also moved out
> of CompilationJob and instead becomes a static function
> on Compiler.
>
> BUG=v8:5203
>
> Committed: https://crrev.com/1fb6a7e697e8bc5b4af51647553741f966e00cdc
> Committed: https://crrev.com/785990e9fc0dd9a9d963d25d0bed2909165e4ca9
> Cr-Original-Commit-Position: refs/heads/master@{#38662}
> Cr-Commit-Position: refs/heads/master@{#38668}
TBR=mstarzinger@chromium.org,jkummerow@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5203
Review-Url: https://codereview.chromium.org/2251673003
Cr-Commit-Position: refs/heads/master@{#38669}
Adds InterpreterCompilationJob as a sub-class of
CompilationJob, to enable off-thread bytecode
generation. Currently only used in
Interpreter::MakeBytecode.
As part of this change, CompilationJob is modified
to make it less specific to optimized compilation,
renaming the phases as follows:
- CreateGraph -> PrepareJob
- OptimizeGraph -> ExecuteJob
- GenerateCode -> FinalizeJob
RegisterWeakObjectsInOptimizedCode is also moved out
of CompilationJob and instead becomes a static function
on Compiler.
BUG=v8:5203
Committed: https://crrev.com/1fb6a7e697e8bc5b4af51647553741f966e00cdc
Review-Url: https://codereview.chromium.org/2240463002
Cr-Original-Commit-Position: refs/heads/master@{#38662}
Cr-Commit-Position: refs/heads/master@{#38668}
Reason for revert:
Failing on Win64 bot:
https://build.chromium.org/p/client.v8/builders/V8%20Win64/builds/12061/steps/Check/logs/regress-635429
Original issue's description:
> [Interpreter] Introduce InterpreterCompilationJob
>
> Adds InterpreterCompilationJob as a sub-class of
> CompilationJob, to enable off-thread bytecode
> generation. Currently only used in
> Interpreter::MakeBytecode.
>
> As part of this change, CompilationJob is modified
> to make it less specific to optimized compilation,
> renaming the phases as follows:
> - CreateGraph -> PrepareJob
> - OptimizeGraph -> ExecuteJob
> - GenerateCode -> FinalizeJob
>
> RegisterWeakObjectsInOptimizedCode is also moved out
> of CompilationJob and instead becomes a static function
> on Compiler.
>
> BUG=v8:5203
>
> Committed: https://crrev.com/1fb6a7e697e8bc5b4af51647553741f966e00cdc
> Cr-Commit-Position: refs/heads/master@{#38662}
TBR=mstarzinger@chromium.org,jkummerow@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5203
Review-Url: https://codereview.chromium.org/2249153002
Cr-Commit-Position: refs/heads/master@{#38663}
Adds InterpreterCompilationJob as a sub-class of
CompilationJob, to enable off-thread bytecode
generation. Currently only used in
Interpreter::MakeBytecode.
As part of this change, CompilationJob is modified
to make it less specific to optimized compilation,
renaming the phases as follows:
- CreateGraph -> PrepareJob
- OptimizeGraph -> ExecuteJob
- GenerateCode -> FinalizeJob
RegisterWeakObjectsInOptimizedCode is also moved out
of CompilationJob and instead becomes a static function
on Compiler.
BUG=v8:5203
Review-Url: https://codereview.chromium.org/2240463002
Cr-Commit-Position: refs/heads/master@{#38662}
A test exercising the public APIs for wasm serialization and
simulates the serialization scenario - serialize in one isolate, deserialize
in another.
BUG=v8:5072
Review-Url: https://codereview.chromium.org/2249973002
Cr-Commit-Position: refs/heads/master@{#38644}
With this CL all kinds of Callable can imported into wasm. Please take a special look at the context that is used now in the WasmToJSWrapper.
BUG=633895
TEST=mjsunit/wasm/ffi.js
Review-Url: https://codereview.chromium.org/2208703002
Cr-Commit-Position: refs/heads/master@{#38569}
This patch updates internal data structures used by V8 to support
multiple indirect function tables (WebAssembly/design#682). But, since
this feature is post-MVP, the functionality is not directly exposed and
parsing/generation of WebAssembly is left unchanged. Nevertheless, it
is being used in an experiment to implement fine-grained control flow
integrity based on C/C++ types.
BUG=
Review-Url: https://codereview.chromium.org/2174123002
Cr-Commit-Position: refs/heads/master@{#38110}
- Add Simd128 type to Wasm AST types
- Add a pass that converts SIMD machine ops to runtime calls
- Sample opcodes Int32x4Splat, Int32x4ExtractLane and test
- Separate out generic SIMD Machine ops as these cannot be
handled by runtime functions just yet.
LOG=N
BUG=v8:4124
R=bradnelson@chromium.org, bbudge@chromium.org, titzer@chromium.org
Review-Url: https://codereview.chromium.org/1991143002
Cr-Commit-Position: refs/heads/master@{#37789}
To correctly support instantiating a compiled module multiple times, we clone the
compiled module each time we create an instance, since some of the data is specific
to the instance - e.g. export code, wasm functions, indirect table.
BUG=v8:5072
Review-Url: https://codereview.chromium.org/2134593002
Cr-Commit-Position: refs/heads/master@{#37692}
In the current implementation of wasm an unrepresentable input of the
float32-to-int32 conversion is detected by first truncating the input, then
converting the truncated input to int32 and back to float32, and then checking
whether the result is the same as the truncated input.
This input check does not work on arm and arm64 for an input of (INT32_MAX + 1)
because on these platforms the float32-to-int32 conversion results in INT32_MAX
if the input is greater than INT32_MAX. When INT32_MAX is converted back to
float32, then the result is (INT32_MAX + 1) again because INT32_MAX cannot be
represented precisely as float32, and rounding-to-nearest results in (INT32_MAX
+ 1). Since (INT32_MAX + 1) equals the truncated input value, the input appears
to be representable.
With the changes in this CL, the result of the float32-to-int32 conversion is
incremented by 1 if the original result was INT32_MAX. Thereby the detection of
unrepresenable inputs in wasm works. Note that since INT32_MAX cannot be
represented precisely in float32, it can also never be a valid result of the
float32-to-int32 conversion.
@v8-mips-ports, can you do a similar implementation for mips?
R=titzer@chromium.org, Rodolph.Perfetta@arm.com
Review-Url: https://codereview.chromium.org/2105313002
Cr-Commit-Position: refs/heads/master@{#37448}
Reland of https://codereview.chromium.org/2034093002 (reverted by
https://codereview.chromium.org/2080153002).
Original commit message:
Implement WASM support on big-endian platforms. WASM has
an implicit requirement that it is running on little-endian
machine. We achieve WASM support on BE by keeping data
in memory in little-endian order, and changing data
endianness before storing to memory and after loading from
memory.
BUG=
Review-Url: https://codereview.chromium.org/2083523002
Cr-Commit-Position: refs/heads/master@{#37373}
This reverts commit 1eb1dfabe4.
The original compilation separation change avoided associating a heap
for the wasm instance if memory was not provided, nor needed. The
grow memory CL assumed the old behavior, where a memory buffer was
always present, but may have had a zero size.
The 2CLS landed shortly after one another. We decided to treat the
grow memory as the race condition winner, so this CL here re-lands
compilation separation, plus adjusts grow memory to deal with
the undefined mem buffer.
BUG=
Review-Url: https://codereview.chromium.org/2102193003
Cr-Commit-Position: refs/heads/master@{#37352}
Support for serializing/deserializing the compiled wasm module.
We want to reuse the javascript snapshotting mechanics, at least in the
short term, when we still use the JS heap for the compiled wasm code.
Given that a module may be compiled in one v8 instance and then
instantiated later, in a different instance, whatever information we need
at instantiation time must also be serializable.
We currently hold on to the un-decoded wasm bytes, for enabling
debugging scenarios. This imposes a ~20% penalty on the memory
requirements of the wasm compiled code. We do not need this data
otherwise, for runtime, and it is sensible to consider eventually loading it
on demand. Therefore, I intentionally avoided relying on it and re-
decoding the wasm module data, and instead saved the information
necessary to support instantiation.
Given how whatever we need to persist must be serializable, the CL
uses a structure made out of serializable objects (fixed arrays mostly)
for storing this information. I preferred going this route rather than
adding more wasm-specific support to the serializer, given that we want
to eventually move off the JS heap, and therefore the serializer.
Additionally, it turns out this extra information is relatively not complex:
minimal structure, little nesting depth, mostly simple data like numbers
or byte blobs, or opaque data like compiled functions.
This CL also moves export compilation ahead of instantiation time.
This change added a helper getter to FixedArray, to make typed retrieval
of elements easier.
BUG=
Review-Url: https://codereview.chromium.org/2094563002
Cr-Commit-Position: refs/heads/master@{#37348}
Remove second wasm module compilation and instantiation path that
we had in CompileAndRunWasmModule and reuse the same path used
by user code.
BUG=
Review-Url: https://codereview.chromium.org/2091533002
Cr-Commit-Position: refs/heads/master@{#37203}
Yanking out in an effort to reduce dependencies. We probably want to
separate codegen into instance-specific and module-generic purpose -
eventually.
BUG=
Review-Url: https://codereview.chromium.org/2085863003
Cr-Commit-Position: refs/heads/master@{#37126}
Port 481502dad9
Float32SubMinusZero and Float64SubMinusZero tests are failing because MIPS does not preserve NaN payload according to Wasm spec. Implemented macro-assembler methods that check for NaN operands, and return the qNaN value with preserved payload and sign bits.
TEST=cctest/test-run-wasm/Run_WasmFloat32SubMinusZero, cctest/test-run-wasm/Run_WasmFloat64SubMinusZero
BUG=
patch from issue 2019693002 at patchset 140001 (http://crrev.com/2019693002#ps140001)
R=ahaas@chromium.org
Review-Url: https://codereview.chromium.org/2066483008
Cr-Commit-Position: refs/heads/master@{#37105}
Reason for revert:
[Sheriff] Speculative revert for crashes on chrubuntu chromebooks:
https://build.chromium.org/p/client.v8.ports/builders/V8%20Arm/builds/320
Original issue's description:
> Implement WASM big-endian support.
>
> Implement WASM support on big-endian platforms. WASM has
> an implicit requirement that it is running on little-endian
> machine. We achieve WASM support on BE by keeping data
> in memory in little-endian order, and changing data
> endianness before storing to memory and after loading from
> memory.
>
> BUG=
>
> Committed: https://crrev.com/d3f3f6c8186b2a53f0c539f7bba0c3708c4d83f9
> Cr-Commit-Position: refs/heads/master@{#37065}
TBR=titzer@chromium.org,akos.palfi@imgtec.com,balazs.kilvady@imgtec.com,jyan@ca.ibm.com,ivica.bogosavljevic@imgtec.com
# Not skipping CQ checks because original CL landed more than 1 days ago.
BUG=
Review-Url: https://codereview.chromium.org/2080153002
Cr-Commit-Position: refs/heads/master@{#37091}
Compilation of wasm functions happens before instantiation. Imports are linked afterwards, at instantiation time. Globals and memory are also
allocated and then tied in via relocation at instantiation time.
This paves the way for implementing Wasm.compile, a prerequisite to
offering the compiled code serialization feature.
Currently, the WasmModule::Compile method just returns a fixed array
containing the code objects. More appropriate modeling of the compiled module to come.
Opportunistically centralized the logic on how to update memory
references, size, and globals, since that logic is the exact same on each
architecture, except for the actual storing of values back in the
instruction stream.
BUG=v8:5072
Review-Url: https://codereview.chromium.org/2056633002
Cr-Commit-Position: refs/heads/master@{#37086}
Implement WASM support on big-endian platforms. WASM has
an implicit requirement that it is running on little-endian
machine. We achieve WASM support on BE by keeping data
in memory in little-endian order, and changing data
endianness before storing to memory and after loading from
memory.
BUG=
Review-Url: https://codereview.chromium.org/2034093002
Cr-Commit-Position: refs/heads/master@{#37065}
We report the byte offset as column number, but devtools assumes them
to be 1-based and subtracts one unconditionally before further
processing it. It's a bit unfortunate, but because of that we have to
just add 1 to the reported column number on the public StackTrace API.
R=ahaas@chromium.org, titzer@chromium.org
BUG=chromium:613110
Review-Url: https://codereview.chromium.org/2071563002
Cr-Commit-Position: refs/heads/master@{#37036}
The last 4 test cases in test/cctest/wasm/test-run-wasm-asmjs.cc added by the CL 36911 (https://codereview.chromium.org/2061583002) use float_t and double_t type for WasmRunner.
For examples: At line 249: WasmRunner<float_t> r(&module, MachineType::Uint32());
But float_t and double_t depends on FLT_EVAL_METHOD macro of compiler. FLT_EVAL_METHOD is variant on different platform, if the FLT_EVAL_METHOD is 2, both float_t and double_t will be long
double and gcc or clang will met error when compiling WasmRunner<long double> r(&module,MachineType::Uint32());
For more details, please refer:
float_t: http://www.cplusplus.com/reference/cmath/float_t/
FLT_EVAL_METHOD: https://en.wikipedia.org/wiki/C99 check the IEEE 754 floating point support section directly.
This CL used float and double to replace float_t and double_t to avoid this issue.
BUG=
Review-Url: https://codereview.chromium.org/2066703003
Cr-Commit-Position: refs/heads/master@{#36982}
Support for relocatable globals, to facilitate compilation before
instantiation.
BUG=v8:5072
Review-Url: https://codereview.chromium.org/2062003002
Cr-Commit-Position: refs/heads/master@{#36978}
MemoryOperands, on IA32. This needed to be fixed so that we can
compile wasm code before creating instances, since the compiled code
needs to be patched up for memory and globals references.
This surfaces in asm-to-wasm scenarios.
Added testing (rather, enhanced existing tests).
Note patch#1 where we fail on ia32, and patch#2 with the fix.
BUG=v8:5072
Review-Url: https://codereview.chromium.org/2061583002
Cr-Commit-Position: refs/heads/master@{#36911}
This interpreter directly decodes and executes WASM binary code for
the purpose of supporting low-level debugging. It is not currently
integrated into the main WASM implementation.
R=ahaas@chromium.org,clemensh@chromium.org,rossberg@chromium.org,binji@chromium.org
BUG=
Review-Url: https://codereview.chromium.org/1972153002
Cr-Commit-Position: refs/heads/master@{#36497}
Moved globals offsets calculation to the wasm module decoder, since
this is a property of the module, not of each instance.
Qualified as "const" references to WasmModule outside of the decoder
and some test situations.
BUG=
Review-Url: https://codereview.chromium.org/2005933003
Cr-Commit-Position: refs/heads/master@{#36484}
Empty function names are allowed and are output as such, unnamed
functions or functions with no valid UTF-8 name are output as
"<WASM UNNAMED>", while the CallSite object returns null as the
function name.
R=titzer@chromium.org, yangguo@chromium.org
Review-Url: https://codereview.chromium.org/1970503004
Cr-Commit-Position: refs/heads/master@{#36348}
This is a first step to removing the support for the OldFunctions
section altogether, which will greatly simplify the encoder and remove
the need to do local variable remapping in asm->wasm.
R=bradnelson@chromium.org,aseemgarg@chromium.org
BUG=
Review-Url: https://codereview.chromium.org/1974933002
Cr-Commit-Position: refs/heads/master@{#36228}
This changes different locations to extract the reference to the wasm
object and the function index from the stack trace, and make it
available through all the APIs which process stack traces.
The javascript CallSite object now has the new methods isWasm(),
getWasmObject() and getWasmFunctionIndex(); the byte offset is
available via getPosition().
Function names of wasm frames should be fully functional with this
commit, position information works reliably for calls, but not for
traps like unreachable or out-of-bounds accesses.
R=titzer@chromium.org, yangguo@chromium.org
Review-Url: https://codereview.chromium.org/1909353002
Cr-Commit-Position: refs/heads/master@{#36067}
In order to have a wasm object (as JSObject), this adds a method to
instantiate the TestingModule. In order for this to work, the bytecode
and the function names of the TestingModule are stored for usage during
instantiation.
R=titzer@chromium.org
Review-Url: https://codereview.chromium.org/1916403002
Cr-Commit-Position: refs/heads/master@{#35906}
[wasm] Binary 11: Swap the order of section name / section length.
[wasm] Binary 11: Shorter section names.
[wasm] Binary 11: Add a prefix for function type declarations.
[wasm] Binary 11: Function types encoded as pcount, p*, rcount, r*
[wasm] Fix numeric names for functions.
R=rossberg@chromium.org,jfb@chromium.org,ahaas@chromium.org
BUG=chromium:575167
LOG=Y
Review-Url: https://codereview.chromium.org/1896863003
Cr-Commit-Position: refs/heads/master@{#35897}
[wasm] Binary 11: br_table takes a value.
[wasm] Binary 11: Add implicit blocks to if arms.
[wasm] Binary 11: Add arities to call, return, and breaks
[wasm] Binary 11: Add experimental version.
This CL changes the encoder, decoder, and tests to use a postorder
encoding of the AST, which is more efficient in decode time and
space.
R=bradnelson@chromium.org,rossberg@chromium.org,binji@chromium.org
BUG=chromium:575167
LOG=Y
Review-Url: https://codereview.chromium.org/1830663002
Cr-Commit-Position: refs/heads/master@{#35896}
This patch provides a new implementation of popcnt and ctz in the case
where the platform does not provide these instructions. Instead of
building a TF graph which implements it we now call a C function.
Additionally I turned on additional tests in test-run-wasm-64.cc
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1857363003
Cr-Commit-Position: refs/heads/master@{#35685}
The background here is that graphs generated from WASM are not trimmed.
That means there can be some floating control diamonds that are not
reachable from end. An assertion in the scheduler for phis from floating
diamonds checks that the use edge in this situation is the control edge,
but in general, any edge could cause this.
Scheduling still works without this assertion. The longer term fix
is to either trim the graphs (more compile time overhead for WASM)
or improve the scheduler's handling of dead code in the graph. Currently
it does not schedule dead code but the potential use positions of
dead code are used in the computation of the common dominator of uses. We could
recognize dead nodes in PrepareUses() and check in GetBlockForUse()
as per TODO.
R=bradnelson@chromium.org, mstarzinger@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1846933002
Cr-Commit-Position: refs/heads/master@{#35245}
Run_Wasm_F32CopySign was failing because function copysign
that is used to verify the results does implicit conversion
from float to double. In this conversion we lose information
about NaN sign and the test fails.
Fix by using copysignf to avoid unnecessary float to double
conversion.
TEST=cctest/test-run-wasm/Run_Wasm_F32CopySign
BUG=
Review URL: https://codereview.chromium.org/1857753002
Cr-Commit-Position: refs/heads/master@{#35237}
We expect that the majority of malloc'd memory held by V8 is allocated
in Zone objects. Introduce an Allocator class that is used by Zones to
manage memory, and allows for querying the current usage.
BUG=none
R=titzer@chromium.org,bmeurer@chromium.org,jarin@chromium.org
LOG=n
TBR=rossberg@chromium.org
Review URL: https://codereview.chromium.org/1847543002
Cr-Commit-Position: refs/heads/master@{#35196}
*) For all tests the input validation was incorrect, i.e. some values
were considered invalid although they were valid. The problem was that
values which are outside int range can get in range through truncation.
*) Removed an assertion in the x64 code generation of
TruncateFloat64ToUint32 which trapped on negative inputs.
*) Introduced a new TF operator TruncateFloat32ToUint32 which does
the same as ChangeFloat32ToUint32 but does not trap on negative inputs.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1843983002
Cr-Commit-Position: refs/heads/master@{#35176}
Int64Mul is lowered to a new turbofan operator, Int32MulPair. The new
operator takes 4 inputs an generates 2 outputs. The inputs are the low
word of the left input, high word of the left input, the low word of the
right input, and high word of the right input. The ouputs are the low
and high word of the result of the multiplication.
R=titzer@chromium.org, v8-arm-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1807273002
Cr-Commit-Position: refs/heads/master@{#35131}
The new implementation deals with cycles in the TF graph in two steps:
1) The lowering of phis is delayed to avoid cyclic dependencies.
2) The replacement nodes of phis are created already when the phi is
pushed onto the stack so that other nodes can use these replacements
for their lowering.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1844553002
Cr-Commit-Position: refs/heads/master@{#35126}
In JavaScript code and stubs, JSSP mirrors the CSP but may be unaligned.
But in WASM code only CSP is used, like native code, and it must be
aligned.
Calls into WASM from JS need to carefully align the C stack
pointer (csp) and restore the previous JSSP, while calls from WASM
to JS need to compute a new JSSP and restore their CSP after the
call.
R=ahaas@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1811283003
Cr-Commit-Position: refs/heads/master@{#35096}
The CL #34701 (https://codereview.chromium.org/1779123002/) added the Run_WasmF32SConvertI64/Run_WasmF64SConvertI64 test cases and X87 failed at them.
The reason is same as the CL #33630 (Issue 1649323002: X87: Change the test case for X87 RunRoundInt32ToFloat32), please refer: https://codereview.chromium.org/1649323002.
Here is the key comments from CL #33630:
Some new test cases use CheckFloatEq(...) and CheckDoubleEq(...) function for result check. When GCC compiling the CheckFloatEq() and CheckDoubleEq() function,
those inlined functions has different behavior comparing with GCC ia32 build and x87 build.
The major difference is sse float register still has single precision rounding semantic. While X87 register has no such rounding precsion semantic when directly use register value.
The V8 turbofan JITTed has exactly same result in both X87 and IA32 port.
For CHECK_EQ(a, b) function, if a and b are double or float, it will has similar behaviors like CheckFloatEq(...) and CheckDoubleEq(...) function when compiled by GCC and causes the test case fail.
So we add the following sentence to do type case to keep the same precision for Run_WasmF32SConvertI64/Run_WasmF64SConvertI64. Such as: volatile double expect = static_cast<float>(*i).
ahaas put those codes in CHECK_FLOAT_EQ and CHECK_DOUBLE_EQ macros in CL #34534 (https://codereview.chromium.org/1773513002 ).
So this CL replaced the CHECK_EQ in Run_WasmF32SConvertI64/Run_WasmF64SConvertI64 to CHECK_FLOAT_EQ/CHECK_DOUBLE_EQ for x87 can pass Run_WasmF32SConvertI64/Run_WasmF64SConvertI64 tests.
BUG=
Review URL: https://codereview.chromium.org/1784813004
Cr-Commit-Position: refs/heads/master@{#34813}
Int64Sub is lowered to a new turbofan operator, Int32SubPair. The new
operator takes 4 inputs an generates 2 outputs. The inputs are the low
word of the left input, high word of the left input, the low word of the
right input, and high word of the right input. The ouputs are the low
and high word of the result of the subtraction.
The implementation is very similar to the implementation of Int64Add.
@v8-arm-ports: please take a careful look at the implementation of sbc
in the simulator.
R=titzer@chromium.org, v8-arm-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1778893005
Cr-Commit-Position: refs/heads/master@{#34808}
Word64Popcnt is lowered to Word32Popcnt(low-word) + Word32Popcnt(high_word).
Since the optional Word64Popcnt operator does not exist on 32 bit platforms,
I introduced a new operator "Word64PopcntPlaceholder" which is generated
in the WasmCompiler and then lowered in the Int64Lowering.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1803453003
Cr-Commit-Position: refs/heads/master@{#34777}
On 32-bit systems these instructions are compiled to calls to
C functions. The TF node for the function call is already generated in
the wasm compiler, the lowering of the I64 parameters is done in the
Int64Lowering. We use the return value of the C function to determine
whether the calculation should trap or not.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1804513002
Cr-Commit-Position: refs/heads/master@{#34768}
Int64Add is lowered to a new turbofan operator, Int32AddPair. The new
operator takes 4 inputs an generates 2 outputs. The inputs are the low
word of the left input, high word of the left input, the low word of the
right input, and high word of the right input. The ouputs are the low
and high word of the result of the addition.
R=titzer@chromium.org, v8-arm-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1778493004
Cr-Commit-Position: refs/heads/master@{#34747}
Move all tests that use i64 values into test-run-wasm-64.cc. Introduce
macros that enable tests as they are implemented on 32 bit platforms.
R=ahaas@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1784343004
Cr-Commit-Position: refs/heads/master@{#34742}
On 32-bit systems I64XConvertFXX instructions are compiled to calls to
C functions. The TF node for the function call is already generated in
the wasm compiler, the lowering of the I64 parameter is done in the
Int64Lowering. We use the return value of the C function to determine
whether the conversion should trap or not.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1775903002
Cr-Commit-Position: refs/heads/master@{#34738}
This CL modifies the following to be LEB128:
* Function table indices
* Import table signature indices
* Export table function indices
* Function signature param count
* br/br_if break depth
* br_table target count
* block/loop expression count
Still to do:
* Import/export names (LEB128 count + inline data)
* Data segments (LEB128 offset + size + inline data)
* Function header stuff (should seperate into function sig and body sections)
* Memory access alignment + offset (still discussing)
BUG=
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1775873002
Cr-Commit-Position: refs/heads/master@{#34603}
Local declarations were previously encoded as an optional set of
4 uint16 values as part of the function declaration. This CL
implements the current design of moving these declarations to
a list of pairs of (type, count) that is part of the body.
R=bradnelson@chromium.org,binji@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1763433002
Cr-Commit-Position: refs/heads/master@{#34564}
I64Shl is lowered to a new turbofan operator, WasmWord64Shl. The new
operator takes 3 inputs, the low-word input, the high-word input, and
the shift, and produces 2 output, the low-word output and the high-word
output.
At the moment I implemented the lowering only for ia32, but I think the
CL is already big enough. I will add the other platforms in separate
CLs.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1756863002
Cr-Commit-Position: refs/heads/master@{#34546}
Instead of using CheckFloatEq and CheckDoubleEq directly, I introduced
a macro which first stores the expected result in a volatile variable.
Here are some comments of previous CLs:
The reason is same as the CL #31808 (issue 1430943002, X87: Change the test case for X87 float operations), please refer: https://codereview.chromium.org/1430943002/.
Here is the key comments from CL #31808
Some new test cases use CheckFloatEq(...) and CheckDoubleEq(...) function for result check. When GCC compiling the CheckFloatEq() and CheckDoubleEq() function,
those inlined functions has different behavior comparing with GCC ia32 build and x87 build.
The major difference is sse float register still has single precision rounding semantic. While X87 register has no such rounding precsion semantic when directly use register value.
The V8 turbofan JITTed has exactly same result in both X87 and IA32 port.
So we add the following sentence to do type cast to keep the same precision for RunCallInt64ToFloat32/RunCallInt64ToFloat64. Such as: volatile double expect = static_cast<float>(*i).
R=titzer@chromium.org, weiliang.lin@intel.com
Review URL: https://codereview.chromium.org/1773513002
Cr-Commit-Position: refs/heads/master@{#34534}
On 32-bit systems FXXXConvertI64 instructions are compiled to calls to
C functions. The TF node for the function call is already generated in
the wasm compiler, the lowering of the I64 parameter is done in the
Int64Lowering.
R=titzer@chromium.org, yangguo@chromium.org
Review URL: https://codereview.chromium.org/1738623003
Cr-Commit-Position: refs/heads/master@{#34487}
I turn the test off for now. The problem is that mips does not deal with
signalling NaNs as expected.
@v8-mips-ports: Could it be that the mips simulator deals differently
with signalling NaNs than the actual hardware? The implementation that
is tested in these tests assumes that sNaN * 1.0 = qNaN, where the bits
of sNaN and qNaN are equal except for the most significant mantissa bit.
This assumption holds for the simulator, but seems not to hold for actual
mips hardware. Do you know more about that?
R=mstarzinger@chromium.org, titzer@chromium.org, v8-mips-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1735673003
Cr-Commit-Position: refs/heads/master@{#34278}
This CL introduces an import section that names functions to be imported
as well as a CallImport bytecode to call imports from this table.
R=binji@chromium.org,bradnelson@chromium.org
LOG=Y
BUG=chromium:575167
Review URL: https://codereview.chromium.org/1709653002
Cr-Commit-Position: refs/heads/master@{#34157}
This cleans up and makes the tests easier to write and understand.
Also prepares for adding the WASM interpreter which needs a
different initialization sequence in tests.
R=ahaas@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1707403002
Cr-Commit-Position: refs/heads/master@{#34123}
I extended the Int64Lowering to lower calls, loads, stores, returns, and
parameters and apply the lowering on both the test function TF graph and
the WasmRunner TF graph.
The lowering of calls also requires an adjustment of the call descriptor.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1704033002
Cr-Commit-Position: refs/heads/master@{#34121}
The BufferedRawMachineAssemblerTester caused problems for the
Int64Lowering. Instead we construct a TF graph now which is compiled by
Pipeline::GenerateCodeForTesting.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1702023002
Cr-Commit-Position: refs/heads/master@{#34107}
