When starting profiling, we iterate the heap to find all existing code
objects and the associated functions.
The iteration tried to log the function's code if either the closure's
code was optimized-but-not-deoptimized or if the optimized code in its
feedback vector was optimized-but-not-deoptimized.
That caused some trouble if the function's code was deoptimized but
we had a valid optimized code in the feedback vector. In that case
we would log the deoptimized code object from the closure, which
would later crash when trying to access the deoptimization information
(which we clear on deoptimization).
This CL just fixes the iteration so that we do not crash. A better fix
might be to log the function's code object if not deoptimized *and*
the code object in type feedback vector if not not deoptimized. Or
perhaps iterate optimized code objects and log those that have
deoptimization information.
Bug: chromium:763073
Change-Id: Iddee6a1c8b0fe332186ef7af2f3751c8828434b1
Reviewed-on: https://chromium-review.googlesource.com/709116
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48437}
To enable executing code in a context of a particular time or date (e.g. when
codepath depends on whether it's say evening or New Year) there is a need for
a way to provide it bypassing actual system time.
Bug: chromium:751993
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: Iee35d97b74345f63fff814a65a6f134d7c970341
Reviewed-on: https://chromium-review.googlesource.com/598666
Commit-Queue: Sergei Datsenko <dats@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47700}
As part of J2V8 development (https://github.com/eclipsesource/J2V8),
we realized that we had a subtle bug in how Isolate scope was created
and it's lifetime managed, see:
https://github.com/eclipsesource/J2V8/issues/313.
Mentioned above bug was fixed, however, what we also noticed is that
V8 API has been constantly and slowly moving to such an API, in which
one has to pass Isolate explicitly to methods and/or constructors. We
found two more places that might have been overlooked. This contribution
adds passing of Isolate pointer explicitly to constructors of
String::Utf8Value and String::Value classes.
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng;master.tryserver.v8:v8_linux_noi18n_rel_ng
Change-Id: I61984285f152aba5ca922100cf3df913a9cb2cea
Reviewed-on: https://chromium-review.googlesource.com/593309
Commit-Queue: Adam Klein <adamk@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47656}
Crankshaft flag and opt flag mostly serve the same purpose. Using
crankshaft to mean use optimizing compiler is a bit confusing.
This cl: https://chromium-review.googlesource.com/c/490206/ fixes
the tests to use opt instead of crankshaft flag.
One difference between --no-crankshaft and --no-opt would be that
--no-opt would mean no optimizations at all where as with --no-crankshaft
would mean we can force optimizations using %OptimizeFunctionOnNextCall.
Bug: v8:6325
Change-Id: If17393ac5b6af4ea6e9a98e092f0261c2e0899c5
Reviewed-on: https://chromium-review.googlesource.com/490307
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Mythri Alle <mythria@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45298}
1. Replaces --crankshaft with --opt in tests.
2. Also fixes presubmit to check for --opt flag when
assertOptimized is used.
3. Updates testrunner/local/variants.py and
v8_foozie.py to use --opt flag.
This would mean, nooptimize variant means there are
no optimizations. Not even with %OptimizeFunctionOnNextCall.
Bug:v8:6325
Change-Id: I638e743d0773a6729c6b9749e2ca1e2537f12ce6
Reviewed-on: https://chromium-review.googlesource.com/490206
Commit-Queue: Mythri Alle <mythria@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44985}
Most callers passed kFinalizeIncrementalMarkingMask, so use that as
a default argument (not using default argument syntax to avoid including
heap.h in cctest.h).
Change-Id: I904f1eb3a0f5fdbe63eab16f6a6f01d04618645d
Reviewed-on: https://chromium-review.googlesource.com/488104
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Adam Klein <adamk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44950}
This fixes the corner-case where the method in question failed to lookup
the very last deoptimization bailout without subsequent entries within
the relocation info. Also enable a test covering this.
R=tebbi@chromium.org
TEST=cctest/test-cpu-profiler/CollectDeoptEvents
Review-Url: https://codereview.chromium.org/2565733002
Cr-Commit-Position: refs/heads/master@{#41623}
The new SourcePosition class allows for precise tracking of source positions including the stack of inlinings. This CL makes the cpu profiler use this new information. Before, the cpu profiler used the deoptimization data to reconstruct the inlining stack. However, optimizing compilers (especially Turbofan) can hoist out checks such that the inlining stack of the deopt reason and the inlining stack of the position the deoptimizer jumps to can be different (the old cpu profiler tests and the ones introduced in this cl produce such situations for turbofan). In this case, relying on the deoptimization info produces paradoxical results, where the reported position is before the function responsible is called. Even worse, https://codereview.chromium.org/2451853002/ combines the precise position with the wrong inlining stack from the deopt info, leading to completely wrong results.
Other changes in this CL:
- DeoptInlinedFrame is no longer needed, because we can compute the correct inlining stack up front.
- I changed the cpu profiler tests back to test situations where deopt checks are hoisted out in Turbofan and made them robust enough to handle the differences between Crankshaft and Turbofan.
- I reversed the order of SourcePosition::InliningStack to make it match the cpu profiler convention.
- I removed CodeDeoptEvent::position, as it is no longer used.
R=alph@chromium.org
BUG=v8:5432
Review-Url: https://codereview.chromium.org/2503393002
Cr-Commit-Position: refs/heads/master@{#41168}
SourcePosition::InliningId() refers to a the new table DeoptimizationInputData::InliningPositions(), which provides the following data for every inlining id:
- The inlined SharedFunctionInfo as an offset into DeoptimizationInfo::LiteralArray
- The SourcePosition of the inlining. Recursively, this yields the full inlining stack.
Before the Code object is created, the same information can be found in CompilationInfo::inlined_functions().
If SourcePosition::InliningId() is SourcePosition::kNotInlined, it refers to the outer (non-inlined) function.
So every SourcePosition has full information about its inlining stack, as long as the corresponding Code object is known. The internal represenation of a source position is a positive 64bit integer.
All compilers create now appropriate source positions for inlined functions. In the case of Turbofan, this required using AstGraphBuilderWithPositions for inlined functions too. So this class is now moved to a header file.
At the moment, the additional information in source positions is only used in --trace-deopt and --code-comments. The profiler needs to be updated, at the moment it gets the correct script offsets from the deopt info, but the wrong script id from the reconstructed deopt stack, which can lead to wrong outputs. This should be resolved by making the profiler use the new inlining information for deopts.
I activated the inlined deoptimization tests in test-cpu-profiler.cc for Turbofan, changing them to a case where the deopt stack and the inlining position agree. It is currently still broken for other cases.
The following additional changes were necessary:
- The source position table (internal::SourcePositionTableBuilder etc.) supports now 64bit source positions. Encoding source positions in a single 64bit int together with the difference encoding in the source position table results in very little overhead for the inlining id, since only 12% of the source positions in Octane have a changed inlining id.
- The class HPositionInfo was effectively dead code and is now removed.
- SourcePosition has new printing and information facilities, including computing a full inlining stack.
- I had to rename compiler/source-position.{h,cc} to compiler/compiler-source-position-table.{h,cc} to avoid clashes with the new src/source-position.cc file.
- I wrote the new wrapper PodArray for ByteArray. It is a template working with any POD-type. This is used in DeoptimizationInputData::InliningPositions().
- I removed HInlinedFunctionInfo and HGraph::inlined_function_infos, because they were only used for the now obsolete Crankshaft inlining ids.
- Crankshaft managed a list of inlined functions in Lithium: LChunk::inlined_functions. This is an analog structure to CompilationInfo::inlined_functions. So I removed LChunk::inlined_functions and made Crankshaft use CompilationInfo::inlined_functions instead, because this was necessary to register the offsets into the literal array in a uniform way. This is a safe change because LChunk::inlined_functions has no other uses and the functions in CompilationInfo::inlined_functions have a strictly longer lifespan, being created earlier (in Hydrogen already).
BUG=v8:5432
Review-Url: https://codereview.chromium.org/2451853002
Cr-Commit-Position: refs/heads/master@{#40975}
With this CL, we set the is_source_positions_enabled flag on CompilationInfo when
- a command line flag is enabled that requires Turbofan to preserve source position
information (e.g. --trace-deopt), and
- when profiling is enabled.
This also removes the --turbo-source-positions flag.
The goal is to eventually only track source position information when needed.
R=mstarzinger@chromium.org
BUG=v8:5439
Review-Url: https://codereview.chromium.org/2484163003
Cr-Commit-Position: refs/heads/master@{#40836}
These are added to the sampler stack trace when RCS are
enabled.
Resource name for a RCS frame is reported as "V8Runtime".
Counter names match ones from src/counters.h
BUG=chromium:660428
Review-Url: https://codereview.chromium.org/2461003002
Cr-Commit-Position: refs/heads/master@{#40658}
A new V8 API object v8::TracingCpuProfiler is introduced.
Client can create it on an isolate to enable JS CPU profiles collected
during tracing session.
Once the v8.cpu_profile2 tracing category is enabled the profiler emits
CpuProfile and CpuProfileChunk events with the profile data.
BUG=chromium:406277
Review-Url: https://codereview.chromium.org/2396733002
Cr-Commit-Position: refs/heads/master@{#40054}
When we OSR using Turbofan, we would set the function to be optimized
on the next call, irrespective of the runtime profiler's previous
decisions - such as compiling for baseline. It seems more prudent to
always make these decisions in the runtime profiler where the data is
available.
Review-Url: https://codereview.chromium.org/2369043002
Cr-Commit-Position: refs/heads/master@{#39782}
GetFunctionNameStr and GetScriptResourceNameStr can be called from a thread
other than isolate VM thread unlike their conterparts GetFunctionName
and GetScriptResourceName.
BUG=406277
Review-Url: https://codereview.chromium.org/2328673003
Cr-Commit-Position: refs/heads/master@{#39313}
Now callers of Heap::CollectGarbage* functions need to
specify the reason as an enum value instead of a string.
Subsequent CL will add stats counter for GC reason.
BUG=
Review-Url: https://codereview.chromium.org/2310143002
Cr-Commit-Position: refs/heads/master@{#39239}
The test was calling OptimizeFunctionOnNextCall on a function before
ever executing it - crankshaft therefore didn't have any type info and
was generating a soft deoptimization bailout. Make sure we execute the
function before calling OptimizeFunctionOnNextCall to avoid this issue.
BUG=
Review-Url: https://codereview.chromium.org/2168603003
Cr-Commit-Position: refs/heads/master@{#38171}
So far TurboFan wasn't adding the deoptimization reasons for eager/soft
deoptimization exits that can be used by either the DevTools profiler or
the --trace-deopt flag. This adds basic support for deopt reasons on
Deoptimize, DeoptimizeIf and DeoptimizeUnless nodes and threads through
the reasons to the code generation.
Also moves the DeoptReason to it's own file (to resolve include cycles)
and drops unused reasons.
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/2161543002
Cr-Commit-Position: refs/heads/master@{#37823}
Isolate is not going to retain a CPU profiler.
The client will be creating an instance of profiler when needed.
Deprectate v8::Isolate::GetCpuProfiler()
BUG=v8:4789
Review-Url: https://codereview.chromium.org/2117343006
Cr-Commit-Position: refs/heads/master@{#37613}
We want to eventually move the profiling functionality out of V8 as library,
this patch exposes TickSample and its APIs in v8-profiler.h so that when
embedders use library, they can have more details.
Minor change: Rename tick-sample.[h|cc] to simulator-helper.[h|cc].
BUG=v8:4789
LOG=N
Review-Url: https://codereview.chromium.org/2105943002
Cr-Commit-Position: refs/heads/master@{#37564}
Currently there are two logic in Ticker, one is to try to request a
pre-allocated TickSample from CpuProfiler and then initialize it, and if the
request fails, it will initialize a local TickSample. The other is it will pass
an initialized TickSample to Profiler to log into v8.log.
This patch splits Ticker into two samplers, the first one remains in log.cc to
collect samples and pass to Profiler for logging, the second one will be called
by ProfilerEventsProcessor, and only use the circular queue only.
BUG=v8:4789
LOG=N
Review-Url: https://codereview.chromium.org/2108393002
Cr-Commit-Position: refs/heads/master@{#37506}
Currently CpuProfiler is a subclass of CodeEventListener, it listens code events
from Logger, constructs and stores CodeEventsContainer. This patch is part of
the effort to split the logic of CodeEventListener as ProfilerListener out of
the profiling functionality logic in CpuProfiler. A ProfilerListener will listen
to code events, construct code event to CodeEventsContainer and pass it to code
event handler.
The reason we refactor CpuProfiler is that eventually we want to move
CpuProfiler as part of sampler library and code event listener should stay
inside V8.
Main changes:
1. Refactored CpuProfiler into two parts, the CpuProfiler with profling
functionality and the ProfilerListener listening to code events from Logger.
2. Created CodeEventObserver and made CpuProfiler inherit from it.
ProfilerListener will have a list of observers and call CodeEventHandler once a
code event is created.
3. Moved code entry list from CodeEntry to ProfilerListener.
Minor changes:
1. Moved static code entry as part of CodeEntry.
2. Added ProfilerListener to Logger.
BUG=v8:4789
Committed: https://crrev.com/cb59fc1facc9b390e2c7544b4da56a4e0a9b3222
Review-Url: https://codereview.chromium.org/2053523003
Cr-Original-Commit-Position: refs/heads/master@{#37112}
Cr-Commit-Position: refs/heads/master@{#37195}
Reason for revert:
MIPS compilation error.
Original issue's description:
> Refactor CpuProfiler.
>
> Currently CpuProfiler is a subclass of CodeEventListener, it listens code events
> from Logger, constructs and stores CodeEventsContainer. This patch is part of
> the effort to split the logic of CodeEventListener as ProfilerListener out of
> the profiling functionality logic in CpuProfiler. A ProfilerListener will listen
> to code events, construct code event to CodeEventsContainer and pass it to code
> event handler.
>
> The reason we refactor CpuProfiler is that eventually we want to move
> CpuProfiler as part of sampler library and code event listener should stay
> inside V8.
>
> Main changes:
> 1. Refactored CpuProfiler into two parts, the CpuProfiler with profling
> functionality and the ProfilerListener listening to code events from Logger.
> 2. Created CodeEventObserver and made CpuProfiler inherit from it.
> ProfilerListener will have a list of observers and call CodeEventHandler once a
> code event is created.
> 3. Moved code entry list from CodeEntry to ProfilerListener.
>
> Minor changes:
> 1. Moved static code entry as part of CodeEntry.
> 2. Added ProfilerListener to Logger.
>
> BUG=v8:4789
>
> Committed: https://crrev.com/cb59fc1facc9b390e2c7544b4da56a4e0a9b3222
> Cr-Commit-Position: refs/heads/master@{#37112}
TBR=alph@chromium.org,jochen@chromium.org,yangguo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4789
Review-Url: https://codereview.chromium.org/2079273003
Cr-Commit-Position: refs/heads/master@{#37113}
Currently CpuProfiler is a subclass of CodeEventListener, it listens code events
from Logger, constructs and stores CodeEventsContainer. This patch is part of
the effort to split the logic of CodeEventListener as ProfilerListener out of
the profiling functionality logic in CpuProfiler. A ProfilerListener will listen
to code events, construct code event to CodeEventsContainer and pass it to code
event handler.
The reason we refactor CpuProfiler is that eventually we want to move
CpuProfiler as part of sampler library and code event listener should stay
inside V8.
Main changes:
1. Refactored CpuProfiler into two parts, the CpuProfiler with profling
functionality and the ProfilerListener listening to code events from Logger.
2. Created CodeEventObserver and made CpuProfiler inherit from it.
ProfilerListener will have a list of observers and call CodeEventHandler once a
code event is created.
3. Moved code entry list from CodeEntry to ProfilerListener.
Minor changes:
1. Moved static code entry as part of CodeEntry.
2. Added ProfilerListener to Logger.
BUG=v8:4789
Review-Url: https://codereview.chromium.org/2053523003
Cr-Commit-Position: refs/heads/master@{#37112}
The patch introduces a dedicated dispatching class for JIT code events. It is
set as a helper on the isolate.
This allows classes across v8 to break their dependency on Logger and CpuProfiler.
These two became just regular clients of the dispatcher.
BUG=v8:4789
Review-Url: https://codereview.chromium.org/2061623002
Cr-Commit-Position: refs/heads/master@{#37005}
This patch does five things:
1. Extracts sampler as libsampler to provide sampling functionality support.
2. Makes SampleStack virtual so embedders can override the behaviour of sample collecting.
3. Removes sampler.[h|cc].
4. Moves sampling thread into log.cc as workaround to keep the --prof functionality.
5. Creates SamplerManager to manage the relationship between samplers and threads.
The reason we port hashmap.h is that in debug mode, STL containers are using
mutexes from a mutex pool, which may lead to deadlock when using asynchronously
signal handler.
Currently libsampler is used in V8 temporarily.
BUG=v8:4789
LOG=n
Committed: https://crrev.com/06cc9b7c176a6223971deaa9fbcafe1a05058c7b
Cr-Commit-Position: refs/heads/master@{#36527}
Review-Url: https://codereview.chromium.org/1922303002
Cr-Commit-Position: refs/heads/master@{#36532}
Reason for revert:
V8 Linux64 TSAN failure because ThreadSanitizer indicated data race.
Original issue's description:
> Create libsampler as V8 sampler library.
>
> This patch does five things:
>
> 1. Extracts sampler as libsampler to provide sampling functionality support.
> 2. Makes SampleStack virtual so embedders can override the behaviour of sample collecting.
> 3. Removes sampler.[h|cc].
> 4. Moves sampling thread into log.cc as workaround to keep the --prof functionality.
> 5. Creates SamplerManager to manage the relationship between samplers and threads.
>
> The reason we port hashmap.h is that in debug mode, STL containers are using
> mutexes from a mutex pool, which may lead to deadlock when using asynchronously
> signal handler.
>
> Currently libsampler is used in V8 temporarily.
>
> BUG=v8:4789
> LOG=n
>
> Committed: https://crrev.com/06cc9b7c176a6223971deaa9fbcafe1a05058c7b
> Cr-Commit-Position: refs/heads/master@{#36527}
TBR=jochen@chromium.org,alph@chromium.org,fmeawad@chromium.org,yangguo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4789
Review-Url: https://codereview.chromium.org/2000323007
Cr-Commit-Position: refs/heads/master@{#36529}
This patch does five things:
1. Extracts sampler as libsampler to provide sampling functionality support.
2. Makes SampleStack virtual so embedders can override the behaviour of sample collecting.
3. Removes sampler.[h|cc].
4. Moves sampling thread into log.cc as workaround to keep the --prof functionality.
5. Creates SamplerManager to manage the relationship between samplers and threads.
The reason we port hashmap.h is that in debug mode, STL containers are using
mutexes from a mutex pool, which may lead to deadlock when using asynchronously
signal handler.
Currently libsampler is used in V8 temporarily.
BUG=v8:4789
LOG=n
Review-Url: https://codereview.chromium.org/1922303002
Cr-Commit-Position: refs/heads/master@{#36527}
This completely removes any potential for a side-channel between the
various compiler backends and the profiler. The CompilationInfo is no
longer passed.
R=yangguo@chromium.org
Review-Url: https://codereview.chromium.org/1970193002
Cr-Commit-Position: refs/heads/master@{#36230}
Add support to log source position offsets to the profiler. As part of
this change PositionsRecorder is split into two, with the subset needed
by log.cc moved into log.h and the remainder kept in assembler.h as
AssemblerPositionsRecorder. The interpreter's source position table
builder is updated to log positions when the profiler is active.
BUG=v8:4766
LOG=N
Review URL: https://codereview.chromium.org/1737043002
Cr-Commit-Position: refs/heads/master@{#34416}
Adds support for cpu profiler logging to the interpreter. Modifies the
the API to be passed AbstractCode objects instead of Code objects, and
adds extra functions to AbstractCode which is required by log.cc and
cpu-profiler.cc.
The main change in sampler.cc is to determine if a stack frame is an
interpreter stack frame, and if so, use the bytecode address as the pc
for that frame. This allows sampling of bytecode functions. This
requires adding support to SafeStackIterator to determine if a frame is
interpreted, which we do by checking the PC against pre-stored addresses
for the start and end of interpreter entry builtins.
Also removes CodeDeleteEvents which are dead code and haven't
been reported for some time.
Still to do is tracking source positions which will be done in a
followup CL.
BUG=v8:4766
LOG=N
Review URL: https://codereview.chromium.org/1728593002
Cr-Commit-Position: refs/heads/master@{#34321}
Recent flake happened bacause all the samples landed into native code.
The patch makes sure we collect enough JS samples.
BUG=v8:4751
LOG=N
Review URL: https://codereview.chromium.org/1695663002
Cr-Commit-Position: refs/heads/master@{#33953}
Do not rely on elapsed time to collect enough samples.
Use CollectSample API function instead.
Remove checks for extra functions present in a profile, as
there in fact can be lots of native support functions.
BUG=v8:2999
LOG=N
Review URL: https://codereview.chromium.org/1665303004
Cr-Commit-Position: refs/heads/master@{#33822}
There might be several ExternalCallbackScope's created
during the native callback. Remove the assert that is not
aligned with that.
Moreover this iterator must work for any kind of
stacks including corrupted ones.
BUG=v8:4705
LOG=N
Review URL: https://codereview.chromium.org/1663193003
Cr-Commit-Position: refs/heads/master@{#33751}
It allows embedder to inject a stack sample on demand.
BUG=chromium:579191
LOG=N
Review URL: https://codereview.chromium.org/1631043002
Cr-Commit-Position: refs/heads/master@{#33527}
Tick event processor should not stay in a tight loop
when there's nothing to do. It can go sleep until next sample event.
LOG=N
BUG=v8:3967
Review URL: https://codereview.chromium.org/1118533003
Cr-Commit-Position: refs/heads/master@{#28211}
Add a finalize incremental marking mode for CollectAllGarbage to finalize incremental marking when incremental marking is in progress, but we want a full gc at a given CollectAllGarbage call site.
Default mode for CollectAllGarbage is finalize incremental marking and perform a full GC.
BUG=
Review URL: https://codereview.chromium.org/1082973003
Cr-Commit-Position: refs/heads/master@{#27831}
it is the last patch of https://codereview.chromium.org/1012633002
All that we need here is to push the collected info to the profiler
and convert it into actionable information about deopt.
On the Next: get the info accessible by embedder.
BUG=chromium:452067
LOG=n
TEST=DeoptAtFirstLevelInlinedSource, DeoptAtSecondLevelInlinedSource, DeoptUntrackedFunction
Review URL: https://codereview.chromium.org/1013143003
Cr-Commit-Position: refs/heads/master@{#27403}
We use slightly different schema for JumpTable on arm64 than for x64.
We do a branch (B) to the JumpTable from the code,
then a branch (B) to the end of jump table code
and then branch to the deoptimizer code with putting
the return address into lr register (Call which is actually Blr).
As a result the 'from' address in Deoptimizer always points to
the end of JumpTable code and we can get nothing from this information.
0) I moved save_doubles and needs_frame code out of for_loop.
1) I replaced B commands with Bl so we put different return addresses
to lr register for the different jump table entries and replaced
the final Call with Br which do not touch lr register.
Also I removed the last_entry check so we will always do the Bl
even for the last entry because we need the right address in lr.
I don't think that this will affect the performance because it
just one more branch for entire deopt mechanics.
BUG=chromium:452067
LOG=n
Review URL: https://codereview.chromium.org/984893003
Cr-Commit-Position: refs/heads/master@{#27094}
The original code always returned the first entry from RelocInfo that matched with
bailout_id. But we may have a few different deopt reasons for one bailout_id.
So we need to get the one which matches with a particular call from JumpTable.
We can do this by checking not 'target_address' (it maps to bailout_id)
but 'from' address which maps to a particular JumpTable entry.
The test was reworked so it tests identical functions against different reasons.
BUG=chromium:452067
LOG=n
Review URL: https://codereview.chromium.org/984773003
Cr-Commit-Position: refs/heads/master@{#27076}
Reason for revert:
Some tests still flaky
Original issue's description:
> CpuProfiler: enable tests except four failing tests.
>
> Four tests are failing due to a problem with no frame ranges.
>
> BUG=
> LOG=n
>
> Committed: https://crrev.com/2be160e726f2be6272b77e53fbd556aded6024f1
> Cr-Commit-Position: refs/heads/master@{#27035}
TBR=yurys@chromium.org,svenpanne@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/987553005
Cr-Commit-Position: refs/heads/master@{#27037}
Four tests are failing due to a problem with no frame ranges.
BUG=
LOG=n
Review URL: https://codereview.chromium.org/976203003
Cr-Commit-Position: refs/heads/master@{#27035}
The root of problem is the fact that we don't track the position of 'this' statement but use them when visit compare statement.
As a result we have -1 as the position of left expression and the resulting relative position is negative and doesn't fit into BitField.
BUG=452067
TEST=test-cpu-profiler/SourceLocation
LOG=n
Review URL: https://codereview.chromium.org/940593002
Cr-Commit-Position: refs/heads/master@{#26741}
1) create beefy RelocInfo table when cpu profiler is active, so if a function
was optimized when profiler was active RelocInfo would get separate DeoptInfo
for the each deopt case.
2) push DeoptInfo from CodeEntry to ProfileNode.
When deopt happens we put the info collected on #1 into CodeEntry and record stack sample.
On the sampling thread we grab the deopt data and append it to the corresponding ProfileNode deopts list.
Sample profile dump.
[Top down]:
0 (root) 0 #1
1 29 #2
1 test 29 #3
2 opt_function 29 #4
2 opt_function 29 #5
deopted at 118 with reason 'not a heap number'
deopted at 137 with reason 'division by zero'
BUG=452067
LOG=n
Committed: https://crrev.com/ce8701b247d3c6604f24f17a90c02d17b4417f54
Cr-Commit-Position: refs/heads/master@{#26615}
Review URL: https://codereview.chromium.org/919953002
Cr-Commit-Position: refs/heads/master@{#26630}
Reason for revert:
static initializers broke the build
Original issue's description:
> CPUProfiler: Push deopt reason further to ProfileNode.
>
> 1) create beefy RelocInfo table when cpu profiler is active, so if a function
> was optimized when profiler was active RelocInfo would get separate DeoptInfo
> for the each deopt case.
>
> 2) push DeoptInfo from CodeEntry to ProfileNode.
> When deopt happens we put the info collected on #1 into CodeEntry and record stack sample.
> On the sampling thread we grab the deopt data and append it to the corresponding ProfileNode deopts list.
>
> Sample profile dump.
> [Top down]:
> 0 (root) 0 #1
> 1 29 #2
> 5 test 29 #3
> 3 opt_function 29 #4
> deopted at 52 with reason 'not a heap number'
> deopted at 71 with reason 'division by zero'
>
> BUG=452067
> LOG=n
>
> Committed: https://crrev.com/ce8701b247d3c6604f24f17a90c02d17b4417f54
> Cr-Commit-Position: refs/heads/master@{#26615}
TBR=jarin@chromium.org,svenpanne@chromium.org,yurys@chromium.org,alph@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=452067
Review URL: https://codereview.chromium.org/915173005
Cr-Commit-Position: refs/heads/master@{#26616}
1) create beefy RelocInfo table when cpu profiler is active, so if a function
was optimized when profiler was active RelocInfo would get separate DeoptInfo
for the each deopt case.
2) push DeoptInfo from CodeEntry to ProfileNode.
When deopt happens we put the info collected on #1 into CodeEntry and record stack sample.
On the sampling thread we grab the deopt data and append it to the corresponding ProfileNode deopts list.
Sample profile dump.
[Top down]:
0 (root) 0 #1
1 29 #2
5 test 29 #3
3 opt_function 29 #4
deopted at 52 with reason 'not a heap number'
deopted at 71 with reason 'division by zero'
BUG=452067
LOG=n
Review URL: https://codereview.chromium.org/919953002
Cr-Commit-Position: refs/heads/master@{#26615}
1) Deoptimizer::Reason was replaced with Deoptimizer::DeoptInfo
because it also has raw position. Also the old name clashes with DeoptReason enum.
2) c_entry_fp assignment call was added to EntryGenerator::Generate
So we can calculate sp and have a chance to record the stack for the deopting function.
btw it makes the test stable.
3) new kind of CodeEvents was added to cpu-profiler
4) GetDeoptInfo method was extracted from PrintDeoptLocation.
So it could be reused in cpu profiler.
BUG=452067
LOG=n
Review URL: https://codereview.chromium.org/910773002
Cr-Commit-Position: refs/heads/master@{#26545}
During generation code and relocation info are generated simultaneously.
When code generation is done you each code object has associated "relocation info".
Relocation information lets V8 to mark interesting places in the generated code: the pointers that might need to be relocated (after garbage collection),
correspondences between the machine program counter and source locations for stack walking.
This patch:
1. Add more source positions info in reloc info to make it suitable for source level mapping.
The amount of data should not be increased dramatically because (1) V8 already marks interesting places in the generated code and
(2) V8 does not write redundant information (it writes a pair (pc_offset, pos) only if pos is changed and skips other).
I measured it on Octane benchmark - for unoptimized code the number of source positions may achieve 2x ('lin_solve' from NavierStokes benchmark).
2. When a sample happens, CPU profiler finds a code object by pc, then use its reloc info to match the sample to a source line.
If a source line is found that hit counter is increased by one for this line.
3. Add a new public V8 API to get the hit source lines by CDT CPU profiler.
Note that it's expected a minor patch in Blink to pack the source level info in JSON to be shown.
4.Add a test that checks how the samples are distributed through source lines.
It tests two cases: (1) relocation info created during code generation and (2) relocation info associated with precompiled function's version.
Patch from Denis Pravdin <denis.pravdin@intel.com>;
R=svenpanne@chromium.org, yurys@chromium.org
Review URL: https://codereview.chromium.org/682143003
Patch from Weiliang <weiliang.lin@intel.com>.
Cr-Commit-Position: refs/heads/master@{#25182}
git-svn-id: https://v8.googlecode.com/svn/branches/bleeding_edge@25182 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Reason for revert:
It broke layout test fast/events/window-onerror-02.html, error column reported by window.onerror is now wrong (I believe it is because of the change in full-codegen):
http://build.chromium.org/p/client.v8/builders/V8-Blink%20Linux%2064%20%28dbg%29/builds/652
Original issue's description:
> Extend CPU profiler with mapping ticks to source lines
>
> The idea behind of this solution is to use the existing "relocation info" instead of consumption the CodeLinePosition events emitted by the V8 compilers.
> During generation code and relocation info are generated simultaneously.
> When code generation is done you each code object has associated "relocation info".
> Relocation information lets V8 to mark interesting places in the generated code: the pointers that might need to be relocated (after garbage collection),
> correspondences between the machine program counter and source locations for stack walking.
>
> This patch:
> 1. Add more source positions info in reloc info to make it suitable for source level mapping.
> The amount of data should not be increased dramatically because (1) V8 already marks interesting places in the generated code and
> (2) V8 does not write redundant information (it writes a pair (pc_offset, pos) only if pos is changed and skips other).
> I measured it on Octane benchmark - for unoptimized code the number of source positions may achieve 2x ('lin_solve' from NavierStokes benchmark).
>
> 2. When a sample happens, CPU profiler finds a code object by pc, then use its reloc info to match the sample to a source line.
> If a source line is found that hit counter is increased by one for this line.
>
> 3. Add a new public V8 API to get the hit source lines by CDT CPU profiler.
> Note that it's expected a minor patch in Blink to pack the source level info in JSON to be shown.
>
> 4.Add a test that checks how the samples are distributed through source lines.
> It tests two cases: (1) relocation info created during code generation and (2) relocation info associated with precompiled function's version.
>
> Patch from Denis Pravdin <denis.pravdin@intel.com>
> BUG=None
> LOG=Y
> R=svenpanne@chromium.org
>
> Committed: https://code.google.com/p/v8/source/detail?r=24389TBR=svenpanne@chromium.org,danno@chromium.org,alph@chromium.org,denis.pravdin@intel.com,weiliang.lin@intel.com
BUG=None
LOG=N
Review URL: https://codereview.chromium.org/624443005
git-svn-id: https://v8.googlecode.com/svn/branches/bleeding_edge@24394 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The idea behind of this solution is to use the existing "relocation info" instead of consumption the CodeLinePosition events emitted by the V8 compilers.
During generation code and relocation info are generated simultaneously.
When code generation is done you each code object has associated "relocation info".
Relocation information lets V8 to mark interesting places in the generated code: the pointers that might need to be relocated (after garbage collection),
correspondences between the machine program counter and source locations for stack walking.
This patch:
1. Add more source positions info in reloc info to make it suitable for source level mapping.
The amount of data should not be increased dramatically because (1) V8 already marks interesting places in the generated code and
(2) V8 does not write redundant information (it writes a pair (pc_offset, pos) only if pos is changed and skips other).
I measured it on Octane benchmark - for unoptimized code the number of source positions may achieve 2x ('lin_solve' from NavierStokes benchmark).
2. When a sample happens, CPU profiler finds a code object by pc, then use its reloc info to match the sample to a source line.
If a source line is found that hit counter is increased by one for this line.
3. Add a new public V8 API to get the hit source lines by CDT CPU profiler.
Note that it's expected a minor patch in Blink to pack the source level info in JSON to be shown.
4.Add a test that checks how the samples are distributed through source lines.
It tests two cases: (1) relocation info created during code generation and (2) relocation info associated with precompiled function's version.
Patch from Denis Pravdin <denis.pravdin@intel.com>
BUG=None
LOG=Y
R=svenpanne@chromium.org
Review URL: https://codereview.chromium.org/616963005
Patch from Denis Pravdin <denis.pravdin@intel.com>.
git-svn-id: https://v8.googlecode.com/svn/branches/bleeding_edge@24389 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The reuse of CodeCreateEvent for deopt events caused a CodeCreateEvent
fired twice for a code object. When the event was processed for the first
time it seized the no-fp-ranges from code object, so the second event
had no ranges info leaving code entry without them.
As a result when a cpu profile sample falls into the region it missed the
2nd stack frame.
LOG=N
BUG=
R=bmeurer@chromium.org, loislo@chromium.org
Review URL: https://codereview.chromium.org/290093005
git-svn-id: https://v8.googlecode.com/svn/branches/bleeding_edge@21418 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
- Distinguish between context bound scripts (Script) and context unbound scripts
(UnboundScript).
- Add ScriptCompiler (which will later contain functions for async compilation).
This is a breaking change, in particular, Script::New no longer exists (it is
replaced by ScriptCompiler::CompileUnbound). Script::Compile remains as a
backwards-compatible shorthand for ScriptCompiler::Compile.
Passing CompilerOptions with produce_data_to_cache = true doesn't do anything
yet; the only way to generate the data to cache is the old preparsing API. (To
be fixed in the next version.)
This is a fixed version of https://codereview.chromium.org/186723005/
BUG=
R=dcarney@chromium.org
Review URL: https://codereview.chromium.org/199063003
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@19925 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
- Distinguish between context bound scripts (Script) and context unbound scripts
(UnboundScript).
- Add ScriptCompiler (which will later contain functions for async compilation).
This is a breaking change, in particular, Script::New no longer exists (it is
replaced by ScriptCompiler::CompileUnbound). Script::Compile remains as a
backwards-compatible shorthand for ScriptCompiler::Compile.
Passing CompilerOptions with produce_data_to_cache = true doesn't do anything
yet; the only way to generate the data to cache is the old preparsing API. (To
be fixed in the next version.)
BUG=
R=dcarney@chromium.org
Review URL: https://codereview.chromium.org/186723005
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@19881 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
All methods for accessing collected profiles by index are deprecated. The indexed storage may well be implemented by the embedder should he need it. CpuProfiler's responsibility is just to create CpuProfile object that contains all collected data and whose lifetime can be managed by the embedder.
BUG=chromium:327298
LOG=Y
R=svenpanne@chromium.org
Review URL: https://codereview.chromium.org/117353002
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18337 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Made operator* return reference to the raw type, not pointer. New method 'get()' should be used when raw pointer is needed.
Also removed useless inline modifier from the SmaprtPointer methods and added const modifier to the methods that don't change smart pointer.
Made ~SmartPointerBase protected to avoid accidental calls of the non-virtual base class's destructor.
drive-by: fixed use after free in src/factory.cc
BUG=None
LOG=N
R=alph@chromium.org, svenpanne@chromium.org
Review URL: https://codereview.chromium.org/101763003
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18275 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Profiler is now started from JavaScript. Since we always capture stack trace when starting profiler there should always be at least one expected sample in the profile.
Also changed ProfilerEventsProcessor::AddCurrentStack to make sure it call TickSample::Init to instead of custom initialization code.
BUG=v8:2920
R=jkummerow@chromium.org
Review URL: https://codereview.chromium.org/25686011
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@17140 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
These classes are meant to replace OS::Ticks() and OS::TimeCurrentMillis(),
which are broken in several ways. The ElapsedTimer class implements a
stopwatch using TimeTicks::HighResNow() for high resolution, monotonic
timing.
Also fix the CpuProfile::GetStartTime() and CpuProfile::GetEndTime()
methods to actually return the time relative to the unix epoch as stated
in the documentation (previously that was relative to some arbitrary
point in time, i.e. boot time).
The previous Windows issues have been resolved, and we now use GetTickCount64()
on Windows Vista and later, falling back to timeGetTime() with rollover
protection for earlier Windows versions.
BUG=v8:2853
R=machenbach@chromium.org, yurys@chromium.org
Review URL: https://codereview.chromium.org/23490015
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16413 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
These classes are meant to replace OS::Ticks() and OS::TimeCurrentMillis(),
which are broken in several ways. The ElapsedTimer class implements a
stopwatch using TimeTicks::HighResNow() for high resolution, monotonic
timing.
Also fix the CpuProfile::GetStartTime() and CpuProfile::GetEndTime()
methods to actually return the time relative to the unix epoch as stated
in the documentation (previously that was relative to some arbitrary
point in time, i.e. boot time).
BUG=v8:2853
R=machenbach@chromium.org
Review URL: https://codereview.chromium.org/23469013
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16398 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
These classes are meant to replace OS::Ticks() and OS::TimeCurrentMillis(),
which are broken in several ways. The ElapsedTimer class implements a
stopwatch using TimeTicks::HighResNow() for high resolution, monotonic
timing.
Also fix the CpuProfile::GetStartTime() and CpuProfile::GetEndTime()
methods to actually return the time relative to the unix epoch as stated
in the documentation (previously that was relative to some arbitrary
point in time, i.e. boot time).
BUG=v8:2853
R=machenbach@chromium.org, yurys@chromium.org
Review URL: https://codereview.chromium.org/23295034
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16388 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
New flag is added that allows to specify CPU profiler sampling rate in microseconds as command line argument. It was tested to work fine with 100us interval(currently it is 1ms). Default values are kept the same as in the current implementation. The new implementation is enabled only on POSIX platforms which use signals to collect samples. Other platforms that pause thread being sampled are to follow.
SIGPROF signals are now sent on the profiler event processor thread to make sure that the processing thread does fall far behind the sampling.
The patch is based on the previous one that was rolled out in r13851. The main difference is that the circular queue is not modified for now.
On Linux sampling for CPU profiler is initiated on the profiler event processor thread, other platforms to follow.
CPU profiler continues to use SamplingCircularQueue, we will probably replace it with a single sample buffer when Mac and Win ports support profiling on the event processing thread.
When --prof option is specified profiling is initiated either on the profiler event processor thread if CPU profiler is on or on the SignalSender thread as it used to be if no CPU profiles are being collected.
ProfilerEventsProcessor::ProcessEventsAndDoSample now waits in a tight loop, processing collected samples until sampling interval expires. To save CPU resources I'm planning to change that to use nanosleep as only one sample is expected in the queue at any point.
BUG=v8:2814
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/21101002
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16310 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
All the tests that started crashing create ProfilerEventsProcessor on the stack. After r16284 SamplingCircularQueue buffer is allocated as a field of the queue instead of separate heap object. This increased self size of ProfilerEventsProcessor by about 1Mb. Windows malloc fails to allocate such an object on the stack and crashes.
BUG=
R=jkummerow@chromium.org
Review URL: https://codereview.chromium.org/23093022
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16287 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
All of these values are derived from the self samples count and there is no need to evaluate them in v8 when clients can do that when needed on their side.
Also added unsigned GetHitCount() which should be used instead of double GetSelfSamplesCount(). I'm going to deprecate the latter one once Blink has switched to GetHitCount.
BUG=267595
TBR=svenpanne@chromium.org
Review URL: https://codereview.chromium.org/22710006
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16119 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The start and end time are now measured in microseconds and the type is int64_t.
This way it seems more natural as we are going to support submilisecond sampling
rate soon. Also it fixes cctest/test-cpu-profiler/ProfileStartEndTime test
failure caused by comparison between long double and double.
TEST=cctest/test-cpu-profiler/ProfileStartEndTime
BUG=v8:2824
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/22155003
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16067 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The start and end time are now measured in microseconds and the type is int64_t. This way it seems more natural as we are going to support submilisecond sampling rate soon. Also it fixes cctest/test-cpu-profiler/ProfileStartEndTime test failure caused by comparison between long double and double.
TEST=cctest/test-cpu-profiler/ProfileStartEndTime
BUG=v8:2824
R=alph@chromium.org, bmeurer@chromium.org
Review URL: https://codereview.chromium.org/22172002
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16049 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
I'm going to change CPU profiler API and deprecate GetSelfTime, GetTotalTime and GetTotalSamplesCount on CpuProfileNode as all of those values are derived from self samples count and sampling rate. The sampling rate in turn is calculate based on the profiling duration so having start/end time and total sample count is enough for calculating smpling rate.
BUG=267595
R=alph@chromium.org, bmeurer@chromium.org
Review URL: https://codereview.chromium.org/21918002
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16039 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Sampling rate is now calculated as total number of samples divided by profiling time in ms. Before the patch the sampling rate was updated once per 100ms which doesn't have any obvious advantage over the simpler method.
Also we are going to get rid of the profile node self and total time calculation in the v8 CPU profiler and only expose profiling start/end time for CpuProfile and number of ticks on each ProfileNode and let clients do all the math should they need it.
BUG=None
R=bmeurer@chromium.org, loislo@chromium.org
Review URL: https://codereview.chromium.org/21105003
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@15944 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The SafeStackFrameIterator used by CPU profiler checked if Isolate::c_entry_fp is null and if it is not it would think that the control flow currently is in some native code. This assumption is wrong because the native code could have called a JS function but JSEntryStub would not reset c_entry_fp to NULL in that case. This CL adds a check in SafeStackFrameIterator::IsValidTop for the case when there is a JAVA_SCRIPT frame on top of EXIT frame.
Also this CL changes ExternalCallbackScope behavior to provide access to the whole stack of the scope objects instead of only top one. This allowed to provide exact callback names for those EXIT frames where external callbacks are called. Without this change it was possible only for the top most native call.
BUG=None
R=loislo@chromium.org, yangguo@chromium.org
Review URL: https://codereview.chromium.org/19775017
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@15832 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
